summaryrefslogtreecommitdiffstats
path: root/tcl8.6/tests/socket.test
diff options
context:
space:
mode:
Diffstat (limited to 'tcl8.6/tests/socket.test')
-rw-r--r--tcl8.6/tests/socket.test2428
1 files changed, 0 insertions, 2428 deletions
diff --git a/tcl8.6/tests/socket.test b/tcl8.6/tests/socket.test
deleted file mode 100644
index a3e5704..0000000
--- a/tcl8.6/tests/socket.test
+++ /dev/null
@@ -1,2428 +0,0 @@
-# Commands tested in this file: socket.
-#
-# This file contains a collection of tests for one or more of the Tcl built-in
-# commands. Sourcing this file into Tcl runs the tests and generates output
-# for errors. No output means no errors were found.
-#
-# Copyright (c) 1994-1996 Sun Microsystems, Inc.
-# Copyright (c) 1998-2000 Ajuba Solutions.
-#
-# See the file "license.terms" for information on usage and redistribution of
-# this file, and for a DISCLAIMER OF ALL WARRANTIES.
-
-# Running socket tests with a remote server:
-# ------------------------------------------
-#
-# Some tests in socket.test depend on the existence of a remote server to
-# which they connect. The remote server must be an instance of tcltest and it
-# must run the script found in the file "remote.tcl" in this directory. You
-# can start the remote server on any machine reachable from the machine on
-# which you want to run the socket tests, by issuing:
-#
-# tcltest remote.tcl -port 2048 # Or choose another port number.
-#
-# If the machine you are running the remote server on has several IP
-# interfaces, you can choose which interface the server listens on for
-# connections by specifying the -address command line flag, so:
-#
-# tcltest remote.tcl -address your.machine.com
-#
-# These options can also be set by environment variables. On Unix, you can
-# type these commands to the shell from which the remote server is started:
-#
-# shell% setenv serverPort 2048
-# shell% setenv serverAddress your.machine.com
-#
-# and subsequently you can start the remote server with:
-#
-# tcltest remote.tcl
-#
-# to have it listen on port 2048 on the interface your.machine.com.
-#
-# When the server starts, it prints out a detailed message containing its
-# configuration information, and it will block until killed with a Ctrl-C.
-# Once the remote server exists, you can run the tests in socket.test with the
-# server by setting two Tcl variables:
-#
-# % set remoteServerIP <name or address of machine on which server runs>
-# % set remoteServerPort 2048
-#
-# These variables are also settable from the environment. On Unix, you can:
-#
-# shell% setenv remoteServerIP machine.where.server.runs
-# shell% senetv remoteServerPort 2048
-#
-# The preamble of the socket.test file checks to see if the variables are set
-# either in Tcl or in the environment; if they are, it attempts to connect to
-# the server. If the connection is successful, the tests using the remote
-# server will be performed; otherwise, it will attempt to start the remote
-# server (via exec) on platforms that support this, on the local host,
-# listening at port 2048. If all fails, a message is printed and the tests
-# using the remote server are not performed.
-
-package require tcltest 2
-namespace import -force ::tcltest::*
-
-# Some tests require the Thread package or exec command
-testConstraint thread [expr {0 == [catch {package require Thread 2.7-}]}]
-testConstraint exec [llength [info commands exec]]
-
-# Produce a random port number in the Dynamic/Private range
-# from 49152 through 65535.
-proc randport {} {
- # firstly try dynamic port via server-socket(0):
- set port 0x7fffffff
- catch {
- set port [lindex [fconfigure [set s [socket -server {} 0]] -sockname] 2]
- close $s
- }
- while {[catch {
- close [socket -server {} $port]
- } msg]} {
- if {[incr i] > 1000} {return -code error "too many iterations to get free random port: $msg"}
- # try random port:
- set port [expr {int(rand()*16383+49152)}]
- }
- return $port
-}
-
-# Test the latency of tcp connections over the loopback interface. Some OSes
-# (e.g. NetBSD) seem to use the Nagle algorithm and delayed ACKs, so it takes
-# up to 200ms for a packet sent to localhost to arrive. We're measuring this
-# here, so that OSes that don't have this problem can run the tests at full
-# speed.
-set server [socket -server {apply {{s a p} {set ::s1 $s}}} 0]
-set s2 [socket localhost [lindex [fconfigure $server -sockname] 2]]
-vwait s1; close $server
-fconfigure $s1 -buffering line
-fconfigure $s2 -buffering line
-set t1 [clock milliseconds]
-puts $s2 test1; gets $s1
-puts $s2 test2; gets $s1
-close $s1; close $s2
-set t2 [clock milliseconds]
-set lat1 [expr {($t2-$t1)*2}]; # doubled as a safety margin
-
-# Test the latency of failed connection attempts over the loopback
-# interface. They can take more than a second under Windowos and requres
-# additional [after]s in some tests that are not needed on systems that fail
-# immediately.
-set t1 [clock milliseconds]
-catch {socket 127.0.0.1 [randport]}
-set t2 [clock milliseconds]
-set lat2 [expr {($t2-$t1)*3}]
-
-# Use the maximum of the two latency calculations, but at least 100ms
-set latency [expr {$lat1 > $lat2 ? $lat1 : $lat2}]
-set latency [expr {$latency > 100 ? $latency : 1000}]
-unset t1 t2 s1 s2 lat1 lat2 server
-
-# If remoteServerIP or remoteServerPort are not set, check in the environment
-# variables for externally set values.
-#
-
-if {![info exists remoteServerIP]} {
- if {[info exists env(remoteServerIP)]} {
- set remoteServerIP $env(remoteServerIP)
- }
-}
-if {![info exists remoteServerPort]} {
- if {[info exists env(remoteServerPort)]} {
- set remoteServerPort $env(remoteServerPort)
- } else {
- if {[info exists remoteServerIP]} {
- set remoteServerPort 2048
- }
- }
-}
-
-if 0 {
- # activate this to time the tests
- proc test {args} {
- set name [lindex $args 0]
- puts "[lindex [time {uplevel [linsert $args 0 tcltest::test]}] 0] @@@ $name"
- }
-}
-
-foreach {af localhost} {
- inet 127.0.0.1
- inet6 ::1
-} {
- # Check if the family is supported and set the constraint accordingly
- testConstraint supported_$af [expr {![catch {socket -server foo -myaddr $localhost 0} sock]}]
- catch {close $sock}
-}
-
-set sock [socket -server foo -myaddr localhost 0]
-set sockname [fconfigure $sock -sockname]
-close $sock
-testConstraint localhost_v4 [expr {"127.0.0.1" in $sockname}]
-testConstraint localhost_v6 [expr {"::1" in $sockname}]
-
-
-foreach {af localhost} {
- any 127.0.0.1
- inet 127.0.0.1
- inet6 ::1
-} {
- if {![testConstraint supported_$af]} {
- continue
- }
- set ::tcl::unsupported::socketAF $af
-#
-# Check if we're supposed to do tests against the remote server
-#
-
-set doTestsWithRemoteServer 1
-if {![info exists remoteServerIP]} {
- set remoteServerIP $localhost
-}
-if {($doTestsWithRemoteServer == 1) && (![info exists remoteServerPort])} {
- set remoteServerPort [randport]
-}
-
-# Attempt to connect to a remote server if one is already running. If it is
-# not running or for some other reason the connect fails, attempt to start the
-# remote server on the local host listening on port 2048. This is only done on
-# platforms that support exec (i.e. not on the Mac). On platforms that do not
-# support exec, the remote server must be started by the user before running
-# the tests.
-
-set remoteProcChan ""
-set commandSocket ""
-if {$doTestsWithRemoteServer} {
- catch {close $commandSocket}
- if {![catch {
- set commandSocket [socket $remoteServerIP $remoteServerPort]
- }]} then {
- fconfigure $commandSocket -translation crlf -buffering line
- } elseif {![testConstraint exec]} {
- set noRemoteTestReason "can't exec"
- set doTestsWithRemoteServer 0
- } else {
- set remoteServerIP $localhost
- # Be *extra* careful in case this file is sourced from
- # a directory other than the current one...
- set remoteFile [file join [pwd] [file dirname [info script]] \
- remote.tcl]
- if {![catch {
- set remoteProcChan [open "|[list \
- [interpreter] $remoteFile -serverIsSilent \
- -port $remoteServerPort -address $remoteServerIP]" w+]
- } msg]} then {
- gets $remoteProcChan
- if {[catch {
- set commandSocket [socket $remoteServerIP $remoteServerPort]
- } msg] == 0} then {
- fconfigure $commandSocket -translation crlf -buffering line
- } else {
- set noRemoteTestReason $msg
- set doTestsWithRemoteServer 0
- }
- } else {
- set noRemoteTestReason "$msg [interpreter]"
- set doTestsWithRemoteServer 0
- }
- }
-}
-
-# Some tests are run only if we are doing testing against a remote server.
-testConstraint doTestsWithRemoteServer $doTestsWithRemoteServer
-if {!$doTestsWithRemoteServer} {
- if {[string first s $::tcltest::verbose] != -1} {
- puts "Skipping tests with remote server. See tests/socket.test for"
- puts "information on how to run remote server."
- puts "Reason for not doing remote tests: $noRemoteTestReason"
- }
-}
-
-#
-# If we do the tests, define a command to send a command to the remote server.
-#
-
-if {[testConstraint doTestsWithRemoteServer]} {
- proc sendCommand {c} {
- global commandSocket
-
- if {[eof $commandSocket]} {
- error "remote server disappeared"
- }
- if {[catch {puts $commandSocket $c} msg]} {
- error "remote server disappaered: $msg"
- }
- if {[catch {puts $commandSocket "--Marker--Marker--Marker--"} msg]} {
- error "remote server disappeared: $msg"
- }
-
- while {1} {
- set line [gets $commandSocket]
- if {[eof $commandSocket]} {
- error "remote server disappaered"
- }
- if {$line eq "--Marker--Marker--Marker--"} {
- lassign $result code info value
- return -code $code -errorinfo $info $value
- }
- append result $line "\n"
- }
- }
-}
-
-proc getPort sock {
- lindex [fconfigure $sock -sockname] 2
-}
-
-
-# ----------------------------------------------------------------------
-
-test socket_$af-1.1 {arg parsing for socket command} -constraints [list socket supported_$af] -body {
- socket -server
-} -returnCodes error -result {no argument given for -server option}
-test socket_$af-1.2 {arg parsing for socket command} -constraints [list socket supported_$af] -body {
- socket -server foo
-} -returnCodes error -result {wrong # args: should be "socket ?-myaddr addr? ?-myport myport? ?-async? host port" or "socket -server command ?-myaddr addr? port"}
-test socket_$af-1.3 {arg parsing for socket command} -constraints [list socket supported_$af] -body {
- socket -myaddr
-} -returnCodes error -result {no argument given for -myaddr option}
-test socket_$af-1.4 {arg parsing for socket command} -constraints [list socket supported_$af] -body {
- socket -myaddr $localhost
-} -returnCodes error -result {wrong # args: should be "socket ?-myaddr addr? ?-myport myport? ?-async? host port" or "socket -server command ?-myaddr addr? port"}
-test socket_$af-1.5 {arg parsing for socket command} -constraints [list socket supported_$af] -body {
- socket -myport
-} -returnCodes error -result {no argument given for -myport option}
-test socket_$af-1.6 {arg parsing for socket command} -constraints [list socket supported_$af] -body {
- socket -myport xxxx
-} -returnCodes error -result {expected integer but got "xxxx"}
-test socket_$af-1.7 {arg parsing for socket command} -constraints [list socket supported_$af] -body {
- socket -myport 2522
-} -returnCodes error -result {wrong # args: should be "socket ?-myaddr addr? ?-myport myport? ?-async? host port" or "socket -server command ?-myaddr addr? port"}
-test socket_$af-1.8 {arg parsing for socket command} -constraints [list socket supported_$af] -body {
- socket -froboz
-} -returnCodes error -result {bad option "-froboz": must be -async, -myaddr, -myport, or -server}
-test socket_$af-1.9 {arg parsing for socket command} -constraints [list socket supported_$af] -body {
- socket -server foo -myport 2521 3333
-} -returnCodes error -result {option -myport is not valid for servers}
-test socket_$af-1.10 {arg parsing for socket command} -constraints [list socket supported_$af] -body {
- socket host 2528 -junk
-} -returnCodes error -result {wrong # args: should be "socket ?-myaddr addr? ?-myport myport? ?-async? host port" or "socket -server command ?-myaddr addr? port"}
-test socket_$af-1.11 {arg parsing for socket command} -constraints [list socket supported_$af] -body {
- socket -server callback 2520 --
-} -returnCodes error -result {wrong # args: should be "socket ?-myaddr addr? ?-myport myport? ?-async? host port" or "socket -server command ?-myaddr addr? port"}
-test socket_$af-1.12 {arg parsing for socket command} -constraints [list socket supported_$af] -body {
- socket foo badport
-} -returnCodes error -result {expected integer but got "badport"}
-test socket_$af-1.13 {arg parsing for socket command} -constraints [list socket supported_$af] -body {
- socket -async -server
-} -returnCodes error -result {cannot set -async option for server sockets}
-test socket_$af-1.14 {arg parsing for socket command} -constraints [list socket supported_$af] -body {
- socket -server foo -async
-} -returnCodes error -result {cannot set -async option for server sockets}
-
-set path(script) [makeFile {} script]
-
-test socket_$af-2.1 {tcp connection} -constraints [list socket supported_$af stdio] -setup {
- file delete $path(script)
- set f [open $path(script) w]
- puts $f {
- set timer [after 10000 "set x timed_out"]
- set f [socket -server accept 0]
- proc accept {file addr port} {
- global x
- set x done
- close $file
- }
- puts ready
- puts [lindex [fconfigure $f -sockname] 2]
- vwait x
- after cancel $timer
- close $f
- puts $x
- }
- close $f
- set f [open "|[list [interpreter] $path(script)]" r]
- gets $f x
- gets $f listen
-} -body {
- # $x == "ready" at this point
- set sock [socket $localhost $listen]
- lappend x [gets $f]
- close $sock
- lappend x [gets $f]
-} -cleanup {
- close $f
-} -result {ready done {}}
-test socket_$af-2.2 {tcp connection with client port specified} -setup {
- set port [randport]
- file delete $path(script)
- set f [open $path(script) w]
- puts $f {
- set timer [after 10000 "set x timeout"]
- set f [socket -server accept 0]
- proc accept {file addr port} {
- global x
- puts "[gets $file] $port"
- close $file
- set x done
- }
- puts ready
- puts [lindex [fconfigure $f -sockname] 2]
- vwait x
- after cancel $timer
- close $f
- }
- close $f
- set f [open "|[list [interpreter] $path(script)]" r]
- gets $f x
- gets $f listen
-} -constraints [list socket supported_$af stdio] -body {
- # $x == "ready" at this point
- set sock [socket -myport $port $localhost $listen]
- puts $sock hello
- flush $sock
- lappend x [expr {[gets $f] eq "hello $port"}]
- close $sock
- return $x
-} -cleanup {
- catch {close [socket $localhost $listen]}
- close $f
-} -result {ready 1}
-test socket_$af-2.3 {tcp connection with client interface specified} -setup {
- file delete $path(script)
- set f [open $path(script) w]
- puts $f {
- set timer [after 2000 "set x done"]
- set f [socket -server accept 0]
- proc accept {file addr port} {
- global x
- puts "[gets $file] $addr"
- close $file
- set x done
- }
- puts [lindex [fconfigure $f -sockname] 2]
- puts ready
- vwait x
- after cancel $timer
- close $f
- }
- close $f
- set f [open "|[list [interpreter] $path(script)]" r]
- gets $f listen
- gets $f x
-} -constraints [list socket supported_$af stdio] -body {
- # $x == "ready" at this point
- set sock [socket -myaddr $localhost $localhost $listen]
- puts $sock hello
- flush $sock
- lappend x [gets $f]
- close $sock
- return $x
-} -cleanup {
- close $f
-} -result [list ready [list hello $localhost]]
-test socket_$af-2.4 {tcp connection with server interface specified} -setup {
- file delete $path(script)
- set f [open $path(script) w]
- puts $f [list set localhost $localhost]
- puts $f {
- set timer [after 2000 "set x done"]
- set f [socket -server accept -myaddr $localhost 0]
- proc accept {file addr port} {
- global x
- puts "[gets $file]"
- close $file
- set x done
- }
- puts ready
- puts [lindex [fconfigure $f -sockname] 2]
- vwait x
- after cancel $timer
- close $f
- }
- close $f
- set f [open "|[list [interpreter] $path(script)]" r]
- gets $f x
- gets $f listen
-} -constraints [list socket supported_$af stdio] -body {
- # $x == "ready" at this point
- set sock [socket $localhost $listen]
- puts $sock hello
- flush $sock
- lappend x [gets $f]
- close $sock
- return $x
-} -cleanup {
- close $f
-} -result {ready hello}
-test socket_$af-2.5 {tcp connection with redundant server port} -setup {
- file delete $path(script)
- set f [open $path(script) w]
- puts $f {
- set timer [after 10000 "set x timeout"]
- set f [socket -server accept 0]
- proc accept {file addr port} {
- global x
- puts "[gets $file]"
- close $file
- set x done
- }
- puts ready
- puts [lindex [fconfigure $f -sockname] 2]
- vwait x
- after cancel $timer
- close $f
- }
- close $f
- set f [open "|[list [interpreter] $path(script)]" r]
- gets $f x
- gets $f listen
-} -constraints [list socket supported_$af stdio] -body {
- # $x == "ready" at this point
- set sock [socket $localhost $listen]
- puts $sock hello
- flush $sock
- lappend x [gets $f]
- close $sock
- return $x
-} -cleanup {
- close $f
-} -result {ready hello}
-test socket_$af-2.6 {tcp connection} -constraints [list socket supported_$af] -body {
- set status ok
- if {![catch {set sock [socket $localhost [randport]]}]} {
- if {![catch {gets $sock}]} {
- set status broken
- }
- close $sock
- }
- set status
-} -result ok
-test socket_$af-2.7 {echo server, one line} -constraints [list socket supported_$af stdio] -setup {
- file delete $path(script)
- set f [open $path(script) w]
- puts $f {
- set timer [after 10000 "set x timeout"]
- set f [socket -server accept 0]
- proc accept {s a p} {
- fileevent $s readable [list echo $s]
- fconfigure $s -translation lf -buffering line
- }
- proc echo {s} {
- set l [gets $s]
- if {[eof $s]} {
- global x
- close $s
- set x done
- } else {
- puts $s $l
- }
- }
- puts ready
- puts [lindex [fconfigure $f -sockname] 2]
- vwait x
- after cancel $timer
- close $f
- puts $x
- }
- close $f
- set f [open "|[list [interpreter] $path(script)]" r]
- gets $f
- gets $f listen
-} -body {
- set s [socket $localhost $listen]
- fconfigure $s -buffering line -translation lf
- puts $s "hello abcdefghijklmnop"
- set x [gets $s]
- close $s
- list $x [gets $f]
-} -cleanup {
- close $f
-} -result {{hello abcdefghijklmnop} done}
-removeFile script
-test socket_$af-2.8 {echo server, loop 50 times, single connection} -setup {
- set path(script) [makeFile {
- set f [socket -server accept 0]
- proc accept {s a p} {
- fileevent $s readable [list echo $s]
- fconfigure $s -buffering line
- }
- proc echo {s} {
- global i
- set l [gets $s]
- if {[eof $s]} {
- global x
- close $s
- set x done
- } else {
- incr i
- puts $s $l
- }
- }
- set i 0
- puts ready
- puts [lindex [fconfigure $f -sockname] 2]
- set timer [after 20000 "set x done"]
- vwait x
- after cancel $timer
- close $f
- puts "done $i"
- } script]
- set f [open "|[list [interpreter] $path(script)]" r]
- gets $f
- gets $f listen
-} -constraints [list socket supported_$af stdio] -body {
- set s [socket $localhost $listen]
- fconfigure $s -buffering line
- catch {
- for {set x 0} {$x < 50} {incr x} {
- puts $s "hello abcdefghijklmnop"
- gets $s
- }
- }
- close $s
- catch {set x [gets $f]}
- return $x
-} -cleanup {
- close $f
- removeFile script
-} -result {done 50}
-set path(script) [makeFile {} script]
-test socket_$af-2.9 {socket conflict} -constraints [list socket supported_$af stdio] -body {
- set s [socket -server accept 0]
- file delete $path(script)
- set f [open $path(script) w]
- puts $f [list set ::tcl::unsupported::socketAF $::tcl::unsupported::socketAF]
- puts $f "socket -server accept [lindex [fconfigure $s -sockname] 2]"
- close $f
- set f [open "|[list [interpreter] $path(script)]" r]
- gets $f
- after 100
- close $f
-} -returnCodes error -cleanup {
- close $s
-} -match glob -result {couldn't open socket: address already in use*}
-test socket_$af-2.10 {close on accept, accepted socket lives} -setup {
- set done 0
- set timer [after 20000 "set done timed_out"]
-} -constraints [list socket supported_$af] -body {
- set ss [socket -server accept 0]
- proc accept {s a p} {
- global ss
- close $ss
- fileevent $s readable "readit $s"
- fconfigure $s -trans lf
- }
- proc readit {s} {
- global done
- gets $s
- close $s
- set done 1
- }
- set cs [socket $localhost [lindex [fconfigure $ss -sockname] 2]]
- puts $cs hello
- close $cs
- vwait done
- return $done
-} -cleanup {
- after cancel $timer
-} -result 1
-test socket_$af-2.11 {detecting new data} -constraints [list socket supported_$af] -setup {
- proc accept {s a p} {
- global sock
- set sock $s
- }
- set s [socket -server accept 0]
- set sock ""
-} -body {
- set s2 [socket $localhost [lindex [fconfigure $s -sockname] 2]]
- vwait sock
- puts $s2 one
- flush $s2
- after idle {set x 1}
- vwait x
- fconfigure $sock -blocking 0
- set result a:[gets $sock]
- lappend result b:[gets $sock]
- fconfigure $sock -blocking 1
- puts $s2 two
- flush $s2
- after $latency {set x 1}; # NetBSD fails here if we do [after idle]
- vwait x
- fconfigure $sock -blocking 0
- lappend result c:[gets $sock]
-} -cleanup {
- fconfigure $sock -blocking 1
- close $s2
- close $s
- close $sock
-} -result {a:one b: c:two}
-test socket_$af-2.12 {} [list socket stdio supported_$af] {
- file delete $path(script)
- set f [open $path(script) w]
- puts $f {
- set server [socket -server accept_client 0]
- puts [lindex [chan configure $server -sockname] 2]
- proc accept_client { client host port } {
- chan configure $client -blocking 0 -buffering line
- write_line $client
- }
- proc write_line client {
- if { [catch { chan puts $client [string repeat . 720000]}] } {
- puts [catch {chan close $client}]
- } else {
- puts signal1
- after 0 write_line $client
- }
- }
- chan event stdin readable {set forever now}
- vwait forever
- exit
- }
- close $f
- set f [open "|[list [interpreter] $path(script)]" r+]
- gets $f port
- set sock [socket $localhost $port]
- chan event $sock readable [list read_lines $sock $f]
- proc read_lines { sock pipe } {
- gets $pipe
- chan close $sock
- chan event $pipe readable [list readpipe $pipe]
- }
- proc readpipe {pipe} {
- while {![string is integer [set ::done [gets $pipe]]]} {}
- }
- vwait ::done
- close $f
- set ::done
-} 0
-test socket_$af-2.13 {Bug 1758a0b603} {socket stdio} {
- file delete $path(script)
- set f [open $path(script) w]
- puts $f {
- set server [socket -server accept 0]
- puts [lindex [chan configure $server -sockname] 2]
- proc accept { client host port } {
- chan configure $client -blocking 0 -buffering line -buffersize 1
- puts $client [string repeat . 720000]
- puts ready
- chan event $client writable [list setup $client]
- }
- proc setup client {
- chan event $client writable {set forever write}
- after 5 {set forever timeout}
- }
- vwait forever
- puts $forever
- }
- close $f
- set pipe [open |[list [interpreter] $path(script)] r]
- gets $pipe port
- set sock [socket $localhost $port]
- chan configure $sock -blocking 0 -buffering line
- chan event $sock readable [list read_lines $sock $pipe ]
- proc read_lines { sock pipe } {
- gets $pipe
- gets $sock line
- after idle [list stop $sock $pipe]
- chan event $sock readable {}
- }
- proc stop {sock pipe} {
- variable done
- close $sock
- set done [gets $pipe]
- }
- variable done
- vwait [namespace which -variable done]
- close $pipe
- set done
-} write
-
-test socket_$af-3.1 {socket conflict} -constraints [list socket supported_$af stdio] -setup {
- file delete $path(script)
- set f [open $path(script) w]
- puts $f [list set localhost $localhost]
- puts $f {
- set f [socket -server accept -myaddr $localhost 0]
- puts ready
- puts [lindex [fconfigure $f -sockname] 2]
- gets stdin
- close $f
- }
- close $f
- set f [open "|[list [interpreter] $path(script)]" r+]
- gets $f
- gets $f listen
-} -body {
- socket -server accept -myaddr $localhost $listen
-} -cleanup {
- puts $f bye
- close $f
-} -returnCodes error -result {couldn't open socket: address already in use}
-test socket_$af-3.2 {server with several clients} -setup {
- file delete $path(script)
- set f [open $path(script) w]
- puts $f [list set localhost $localhost]
- puts $f {
- set t1 [after 30000 "set x timed_out"]
- set t2 [after 31000 "set x timed_out"]
- set t3 [after 32000 "set x timed_out"]
- set counter 0
- set s [socket -server accept -myaddr $localhost 0]
- proc accept {s a p} {
- fileevent $s readable [list echo $s]
- fconfigure $s -buffering line
- }
- proc echo {s} {
- global x
- set l [gets $s]
- if {[eof $s]} {
- close $s
- set x done
- } else {
- puts $s $l
- }
- }
- puts ready
- puts [lindex [fconfigure $s -sockname] 2]
- vwait x
- after cancel $t1
- vwait x
- after cancel $t2
- vwait x
- after cancel $t3
- close $s
- puts $x
- }
- close $f
- set f [open "|[list [interpreter] $path(script)]" r+]
- set x [gets $f]
- gets $f listen
-} -constraints [list socket supported_$af stdio] -body {
- # $x == "ready" here
- set s1 [socket $localhost $listen]
- fconfigure $s1 -buffering line
- set s2 [socket $localhost $listen]
- fconfigure $s2 -buffering line
- set s3 [socket $localhost $listen]
- fconfigure $s3 -buffering line
- for {set i 0} {$i < 100} {incr i} {
- puts $s1 hello,s1
- gets $s1
- puts $s2 hello,s2
- gets $s2
- puts $s3 hello,s3
- gets $s3
- }
- close $s1
- close $s2
- close $s3
- lappend x [gets $f]
-} -cleanup {
- close $f
-} -result {ready done}
-
-test socket_$af-4.1 {server with several clients} -setup {
- file delete $path(script)
- set f [open $path(script) w]
- puts $f [list set localhost $localhost]
- puts $f {
- set port [gets stdin]
- set s [socket $localhost $port]
- fconfigure $s -buffering line
- for {set i 0} {$i < 100} {incr i} {
- puts $s hello
- gets $s
- }
- close $s
- puts bye
- gets stdin
- }
- close $f
- set p1 [open "|[list [interpreter] $path(script)]" r+]
- fconfigure $p1 -buffering line
- set p2 [open "|[list [interpreter] $path(script)]" r+]
- fconfigure $p2 -buffering line
- set p3 [open "|[list [interpreter] $path(script)]" r+]
- fconfigure $p3 -buffering line
-} -constraints [list socket supported_$af stdio] -body {
- proc accept {s a p} {
- fconfigure $s -buffering line
- fileevent $s readable [list echo $s]
- }
- proc echo {s} {
- global x
- set l [gets $s]
- if {[eof $s]} {
- close $s
- set x done
- } else {
- puts $s $l
- }
- }
- set t1 [after 30000 "set x timed_out"]
- set t2 [after 31000 "set x timed_out"]
- set t3 [after 32000 "set x timed_out"]
- set s [socket -server accept -myaddr $localhost 0]
- set listen [lindex [fconfigure $s -sockname] 2]
- puts $p1 $listen
- puts $p2 $listen
- puts $p3 $listen
- vwait x
- vwait x
- vwait x
- after cancel $t1
- after cancel $t2
- after cancel $t3
- close $s
- set l ""
- lappend l [list p1 [gets $p1] $x]
- lappend l [list p2 [gets $p2] $x]
- lappend l [list p3 [gets $p3] $x]
-} -cleanup {
- puts $p1 bye
- puts $p2 bye
- puts $p3 bye
- close $p1
- close $p2
- close $p3
-} -result {{p1 bye done} {p2 bye done} {p3 bye done}}
-test socket_$af-4.2 {byte order problems, socket numbers, htons} -body {
- close [socket -server dodo -myaddr $localhost 0x3000]
- return ok
-} -constraints [list socket supported_$af] -result ok
-
-test socket_$af-5.1 {byte order problems, socket numbers, htons} -body {
- if {![catch {socket -server dodo 0x1} msg]} {
- close $msg
- return {htons problem, should be disallowed, are you running as SU?}
- }
- return {couldn't open socket: not owner}
-} -constraints [list socket supported_$af unix notRoot] -result {couldn't open socket: not owner}
-test socket_$af-5.2 {byte order problems, socket numbers, htons} -body {
- if {![catch {socket -server dodo 0x10000} msg]} {
- close $msg
- return {port resolution problem, should be disallowed}
- }
- return {couldn't open socket: port number too high}
-} -constraints [list socket supported_$af] -result {couldn't open socket: port number too high}
-test socket_$af-5.3 {byte order problems, socket numbers, htons} -body {
- if {![catch {socket -server dodo 21} msg]} {
- close $msg
- return {htons problem, should be disallowed, are you running as SU?}
- }
- return {couldn't open socket: not owner}
-} -constraints [list socket supported_$af unix notRoot] -result {couldn't open socket: not owner}
-
-test socket_$af-6.1 {accept callback error} -constraints [list socket supported_$af stdio] -setup {
- proc myHandler {msg options} {
- variable x $msg
- }
- set handler [interp bgerror {}]
- interp bgerror {} [namespace which myHandler]
- file delete $path(script)
-} -body {
- set f [open $path(script) w]
- puts $f [list set localhost $localhost]
- puts $f {
- gets stdin port
- socket $localhost $port
- }
- close $f
- set f [open "|[list [interpreter] $path(script)]" r+]
- proc accept {s a p} {expr 10 / 0}
- set s [socket -server accept -myaddr $localhost 0]
- puts $f [lindex [fconfigure $s -sockname] 2]
- close $f
- set timer [after 10000 "set x timed_out"]
- vwait x
- after cancel $timer
- close $s
- return $x
-} -cleanup {
- interp bgerror {} $handler
-} -result {divide by zero}
-
-test socket_$af-6.2 {
- readable fileevent on server socket
-} -setup {
- set sock [socket -server dummy 0]
-} -constraints [list socket supported_$af] -body {
- fileevent $sock readable dummy
-} -cleanup {
- close $sock
-} -returnCodes 1 -result "channel is not readable"
-
-test socket_$af-6.3 {writable fileevent on server socket} -setup {
- set sock [socket -server dummy 0]
-} -constraints [list socket supported_$af] -body {
- fileevent $sock writable dummy
-} -cleanup {
- close $sock
-} -returnCodes 1 -result "channel is not writable"
-
-test socket_$af-7.1 {testing socket specific options} -setup {
- file delete $path(script)
- set f [open $path(script) w]
- puts $f {
- set ss [socket -server accept 0]
- proc accept args {
- global x
- set x done
- }
- puts ready
- puts [lindex [fconfigure $ss -sockname] 2]
- set timer [after 10000 "set x timed_out"]
- vwait x
- after cancel $timer
- }
- close $f
- set f [open "|[list [interpreter] $path(script)]" r]
- gets $f
- gets $f listen
- set l ""
-} -constraints [list socket supported_$af stdio] -body {
- set s [socket $localhost $listen]
- set p [fconfigure $s -peername]
- close $s
- lappend l [string compare [lindex $p 0] $localhost]
- lappend l [string compare [lindex $p 2] $listen]
- lappend l [llength $p]
-} -cleanup {
- close $f
-} -result {0 0 3}
-test socket_$af-7.2 {testing socket specific options} -setup {
- file delete $path(script)
- set f [open $path(script) w]
- puts $f [list set ::tcl::unsupported::socketAF $::tcl::unsupported::socketAF]
- puts $f {
- set ss [socket -server accept 0]
- proc accept args {
- global x
- set x done
- }
- puts ready
- puts [lindex [fconfigure $ss -sockname] 2]
- set timer [after 10000 "set x timed_out"]
- vwait x
- after cancel $timer
- }
- close $f
- set f [open "|[list [interpreter] $path(script)]" r]
- gets $f
- gets $f listen
-} -constraints [list socket supported_$af stdio] -body {
- set s [socket $localhost $listen]
- set p [fconfigure $s -sockname]
- close $s
- list [llength $p] \
- [regexp {^(127\.0\.0\.1|0\.0\.0\.0|::1)$} [lindex $p 0]] \
- [expr {[lindex $p 2] == $listen}]
-} -cleanup {
- close $f
-} -result {3 1 0}
-test socket_$af-7.3 {testing socket specific options} -constraints [list socket supported_$af] -body {
- set s [socket -server accept -myaddr $localhost 0]
- set l [fconfigure $s]
- close $s
- update
- llength $l
-} -result 14
-test socket_$af-7.4 {testing socket specific options} -constraints [list socket supported_$af] -setup {
- set timer [after 10000 "set x timed_out"]
- set l ""
-} -body {
- set s [socket -server accept -myaddr $localhost 0]
- proc accept {s a p} {
- global x
- set x [fconfigure $s -sockname]
- close $s
- }
- set listen [lindex [fconfigure $s -sockname] 2]
- set s1 [socket $localhost $listen]
- vwait x
- lappend l [expr {[lindex $x 2] == $listen}] [llength $x]
-} -cleanup {
- after cancel $timer
- close $s
- close $s1
-} -result {1 3}
-test socket_$af-7.5 {testing socket specific options} -setup {
- set timer [after 10000 "set x timed_out"]
- set l ""
-} -constraints [list socket supported_$af unixOrPc] -body {
- set s [socket -server accept 0]
- proc accept {s a p} {
- global x
- set x [fconfigure $s -sockname]
- close $s
- }
- set listen [lindex [fconfigure $s -sockname] 2]
- set s1 [socket $localhost $listen]
- vwait x
- lappend l [lindex $x 0] [expr {[lindex $x 2] == $listen}] [llength $x]
-} -cleanup {
- after cancel $timer
- close $s
- close $s1
-} -result [list $localhost 1 3]
-
-test socket_$af-8.1 {testing -async flag on sockets} -constraints [list socket supported_$af] -body {
- # NOTE: This test may fail on some Solaris 2.4 systems. If it does, check
- # that you have these patches installed (using showrev -p):
- #
- # 101907-05, 101925-02, 101945-14, 101959-03, 101969-05, 101973-03,
- # 101977-03, 101981-02, 101985-01, 102001-03, 102003-01, 102007-01,
- # 102011-02, 102024-01, 102039-01, 102044-01, 102048-01, 102062-03,
- # 102066-04, 102070-01, 102105-01, 102153-03, 102216-01, 102232-01,
- # 101878-03, 101879-01, 101880-03, 101933-01, 101950-01, 102030-01,
- # 102057-08, 102140-01, 101920-02, 101921-09, 101922-07, 101923-03
- #
- # If after installing these patches you are still experiencing a problem,
- # please email jyl@eng.sun.com. We have not observed this failure on
- # Solaris 2.5, so another option (instead of installing these patches) is
- # to upgrade to Solaris 2.5.
- set s [socket -server accept -myaddr $localhost 0]
- proc accept {s a p} {
- global x
- puts $s bye
- close $s
- set x done
- }
- set s1 [socket -async $localhost [lindex [fconfigure $s -sockname] 2]]
- vwait x
- gets $s1
-} -cleanup {
- close $s
- close $s1
-} -result bye
-
-test socket_$af-9.1 {testing spurious events} -constraints [list socket supported_$af] -setup {
- set len 0
- set spurious 0
- set done 0
- set timer [after 10000 "set done timed_out"]
-} -body {
- proc readlittle {s} {
- global spurious done len
- set l [read $s 1]
- if {[string length $l] == 0} {
- if {![eof $s]} {
- incr spurious
- } else {
- close $s
- set done 1
- }
- } else {
- incr len [string length $l]
- }
- }
- proc accept {s a p} {
- fconfigure $s -buffering none -blocking off
- fileevent $s readable [list readlittle $s]
- }
- set s [socket -server accept -myaddr $localhost 0]
- set c [socket $localhost [lindex [fconfigure $s -sockname] 2]]
- puts -nonewline $c 01234567890123456789012345678901234567890123456789
- close $c
- vwait done
- close $s
- list $spurious $len
-} -cleanup {
- after cancel $timer
-} -result {0 50}
-test socket_$af-9.2 {testing async write, fileevents, flush on close} -constraints [list socket supported_$af] -setup {
- set firstblock ""
- for {set i 0} {$i < 5} {incr i} {set firstblock "a$firstblock$firstblock"}
- set secondblock ""
- for {set i 0} {$i < 16} {incr i} {
- set secondblock "b$secondblock$secondblock"
- }
- set timer [after 10000 "set done timed_out"]
- set l [socket -server accept -myaddr $localhost 0]
- proc accept {s a p} {
- fconfigure $s -blocking 0 -translation lf -buffersize 16384 \
- -buffering line
- fileevent $s readable "readable $s"
- }
- proc readable {s} {
- set l [gets $s]
- fileevent $s readable {}
- after idle respond $s
- }
- proc respond {s} {
- global firstblock
- puts -nonewline $s $firstblock
- after idle writedata $s
- }
- proc writedata {s} {
- global secondblock
- puts -nonewline $s $secondblock
- close $s
- }
-} -body {
- set s [socket $localhost [lindex [fconfigure $l -sockname] 2]]
- fconfigure $s -blocking 0 -trans lf -buffering line
- set count 0
- puts $s hello
- proc readit {s} {
- global count done
- set l [read $s]
- incr count [string length $l]
- if {[eof $s]} {
- close $s
- set done 1
- }
- }
- fileevent $s readable "readit $s"
- vwait done
- return $count
-} -cleanup {
- close $l
- after cancel $timer
-} -result 65566
-test socket_$af-9.3 {testing EOF stickyness} -constraints [list socket supported_$af] -setup {
- set count 0
- set done false
- proc write_then_close {s} {
- puts $s bye
- close $s
- }
- proc accept {s a p} {
- fconfigure $s -buffering line -translation lf
- fileevent $s writable "write_then_close $s"
- }
- set s [socket -server accept -myaddr $localhost 0]
-} -body {
- proc count_to_eof {s} {
- global count done
- set l [gets $s]
- if {[eof $s]} {
- incr count
- if {$count > 9} {
- close $s
- set done true
- set count {eof is sticky}
- }
- }
- }
- proc timerproc {s} {
- global done count
- set done true
- set count {timer went off, eof is not sticky}
- close $s
- }
- set c [socket $localhost [lindex [fconfigure $s -sockname] 2]]
- fconfigure $c -blocking off -buffering line -translation lf
- fileevent $c readable "count_to_eof $c"
- set timer [after 1000 timerproc $c]
- vwait done
- return $count
-} -cleanup {
- close $s
- after cancel $timer
-} -result {eof is sticky}
-
-removeFile script
-
-test socket_$af-10.1 {testing socket accept callback error handling} \
- -constraints [list socket supported_$af] -setup {
- variable goterror 0
- proc myHandler {msg options} {
- variable goterror 1
- }
- set handler [interp bgerror {}]
- interp bgerror {} [namespace which myHandler]
-} -body {
- set s [socket -server accept -myaddr $localhost 0]
- proc accept {s a p} {close $s; error}
- set c [socket $localhost [lindex [fconfigure $s -sockname] 2]]
- vwait goterror
- close $s
- close $c
- return $goterror
-} -cleanup {
- interp bgerror {} $handler
-} -result 1
-
-test socket_$af-11.1 {tcp connection} -setup {
- set port [sendCommand {
- set server [socket -server accept 0]
- proc accept {s a p} {
- puts $s done
- close $s
- }
- getPort $server
- }]
-} -constraints [list socket supported_$af doTestsWithRemoteServer] -body {
- set s [socket $remoteServerIP $port]
- gets $s
-} -cleanup {
- close $s
- sendCommand {close $server}
-} -result done
-test socket_$af-11.2 {client specifies its port} -setup {
- set lport [randport]
- set rport [sendCommand {
- set server [socket -server accept 0]
- proc accept {s a p} {
- puts $s $p
- close $s
- }
- getPort $server
- }]
-} -constraints [list socket supported_$af doTestsWithRemoteServer] -body {
- set s [socket -myport $lport $remoteServerIP $rport]
- set r [gets $s]
- expr {$r==$lport ? "ok" : "broken: $r != $port"}
-} -cleanup {
- close $s
- sendCommand {close $server}
-} -result ok
-test socket_$af-11.3 {trying to connect, no server} -body {
- set status ok
- if {![catch {set s [socket $remoteServerIp [randport]]}]} {
- if {![catch {gets $s}]} {
- set status broken
- }
- close $s
- }
- return $status
-} -constraints [list socket supported_$af doTestsWithRemoteServer] -result ok
-test socket_$af-11.4 {remote echo, one line} -setup {
- set port [sendCommand {
- set server [socket -server accept 0]
- proc accept {s a p} {
- fileevent $s readable [list echo $s]
- fconfigure $s -buffering line -translation crlf
- }
- proc echo {s} {
- set l [gets $s]
- if {[eof $s]} {
- close $s
- } else {
- puts $s $l
- }
- }
- getPort $server
- }]
-} -constraints [list socket supported_$af doTestsWithRemoteServer] -body {
- set f [socket $remoteServerIP $port]
- fconfigure $f -translation crlf -buffering line
- puts $f hello
- gets $f
-} -cleanup {
- catch {close $f}
- sendCommand {close $server}
-} -result hello
-test socket_$af-11.5 {remote echo, 50 lines} -setup {
- set port [sendCommand {
- set server [socket -server accept 0]
- proc accept {s a p} {
- fileevent $s readable [list echo $s]
- fconfigure $s -buffering line -translation crlf
- }
- proc echo {s} {
- set l [gets $s]
- if {[eof $s]} {
- close $s
- } else {
- puts $s $l
- }
- }
- getPort $server
- }]
-} -constraints [list socket supported_$af doTestsWithRemoteServer] -body {
- set f [socket $remoteServerIP $port]
- fconfigure $f -translation crlf -buffering line
- for {set cnt 0} {$cnt < 50} {incr cnt} {
- puts $f "hello, $cnt"
- if {[gets $f] != "hello, $cnt"} {
- break
- }
- }
- return $cnt
-} -cleanup {
- close $f
- sendCommand {close $server}
-} -result 50
-test socket_$af-11.6 {socket conflict} -setup {
- set s1 [socket -server accept -myaddr $localhost 0]
-} -constraints [list socket supported_$af doTestsWithRemoteServer] -body {
- set s2 [socket -server accept -myaddr $localhost [getPort $s1]]
- list [getPort $s2] [close $s2]
-} -cleanup {
- close $s1
-} -returnCodes error -result {couldn't open socket: address already in use}
-test socket_$af-11.7 {server with several clients} -setup {
- set port [sendCommand {
- set server [socket -server accept 0]
- proc accept {s a p} {
- fconfigure $s -buffering line
- fileevent $s readable [list echo $s]
- }
- proc echo {s} {
- set l [gets $s]
- if {[eof $s]} {
- close $s
- } else {
- puts $s $l
- }
- }
- getPort $server
- }]
-} -constraints [list socket supported_$af doTestsWithRemoteServer] -body {
- set s1 [socket $remoteServerIP $port]
- fconfigure $s1 -buffering line
- set s2 [socket $remoteServerIP $port]
- fconfigure $s2 -buffering line
- set s3 [socket $remoteServerIP $port]
- fconfigure $s3 -buffering line
- for {set i 0} {$i < 100} {incr i} {
- puts $s1 hello,s1
- gets $s1
- puts $s2 hello,s2
- gets $s2
- puts $s3 hello,s3
- gets $s3
- }
- return $i
-} -cleanup {
- close $s1
- close $s2
- close $s3
- sendCommand {close $server}
-} -result 100
-test socket_$af-11.8 {client with several servers} -setup {
- lassign [sendCommand {
- set s1 [socket -server "accept server1" 0]
- set s2 [socket -server "accept server2" 0]
- set s3 [socket -server "accept server3" 0]
- proc accept {mp s a p} {
- puts $s $mp
- close $s
- }
- list [getPort $s1] [getPort $s2] [getPort $s3]
- }] p1 p2 p3
-} -constraints [list socket supported_$af doTestsWithRemoteServer] -body {
- set s1 [socket $remoteServerIP $p1]
- set s2 [socket $remoteServerIP $p2]
- set s3 [socket $remoteServerIP $p3]
- list [gets $s1] [gets $s1] [eof $s1] [gets $s2] [gets $s2] [eof $s2] \
- [gets $s3] [gets $s3] [eof $s3]
-} -cleanup {
- close $s1
- close $s2
- close $s3
- sendCommand {
- close $s1
- close $s2
- close $s3
- }
-} -result {server1 {} 1 server2 {} 1 server3 {} 1}
-test socket_$af-11.9 {accept callback error} -constraints [list socket supported_$af doTestsWithRemoteServer] -setup {
- proc myHandler {msg options} {
- variable x $msg
- }
- set handler [interp bgerror {}]
- interp bgerror {} [namespace which myHandler]
- set timer [after 10000 "set x timed_out"]
-} -body {
- set s [socket -server accept 0]
- proc accept {s a p} {expr {10 / 0}}
- sendCommand "set port [getPort $s]"
- if {[catch {
- sendCommand {
- set peername [fconfigure $callerSocket -peername]
- set s [socket [lindex $peername 0] $port]
- close $s
- }
- } msg]} then {
- close $s
- error $msg
- }
- vwait x
- return $x
-} -cleanup {
- close $s
- after cancel $timer
- interp bgerror {} $handler
-} -result {divide by zero}
-test socket_$af-11.10 {testing socket specific options} -setup {
- set port [sendCommand {
- set server [socket -server accept 0]
- proc accept {s a p} {close $s}
- getPort $server
- }]
-} -constraints [list socket supported_$af doTestsWithRemoteServer] -body {
- set s [socket $remoteServerIP $port]
- set p [fconfigure $s -peername]
- set n [fconfigure $s -sockname]
- list [expr {[lindex $p 2] == $port}] [llength $p] [llength $n]
-} -cleanup {
- close $s
- sendCommand {close $server}
-} -result {1 3 3}
-test socket_$af-11.11 {testing spurious events} -setup {
- set port [sendCommand {
- set server [socket -server accept 0]
- proc accept {s a p} {
- fconfigure $s -translation "auto lf"
- after idle writesome $s
- }
- proc writesome {s} {
- for {set i 0} {$i < 100} {incr i} {
- puts $s "line $i from remote server"
- }
- close $s
- }
- getPort $server
- }]
- set len 0
- set spurious 0
- set done 0
- set timer [after 40000 "set done timed_out"]
-} -constraints [list socket supported_$af doTestsWithRemoteServer] -body {
- proc readlittle {s} {
- global spurious done len
- set l [read $s 1]
- if {[string length $l] == 0} {
- if {![eof $s]} {
- incr spurious
- } else {
- close $s
- set done 1
- }
- } else {
- incr len [string length $l]
- }
- }
- set c [socket $remoteServerIP $port]
- fileevent $c readable "readlittle $c"
- vwait done
- list $spurious $len $done
-} -cleanup {
- after cancel $timer
- sendCommand {close $server}
-} -result {0 2690 1}
-test socket_$af-11.12 {testing EOF stickyness} -constraints [list socket supported_$af doTestsWithRemoteServer] -setup {
- set counter 0
- set done 0
- set port [sendCommand {
- set server [socket -server accept 0]
- proc accept {s a p} {
- after idle close $s
- }
- getPort $server
- }]
- proc timed_out {} {
- global c done
- set done {timed_out, EOF is not sticky}
- close $c
- }
- set after_id [after 1000 timed_out]
-} -body {
- proc count_up {s} {
- global counter done
- set l [gets $s]
- if {[eof $s]} {
- incr counter
- if {$counter > 9} {
- set done {EOF is sticky}
- close $s
- }
- }
- }
- set c [socket $remoteServerIP $port]
- fileevent $c readable [list count_up $c]
- vwait done
- return $done
-} -cleanup {
- after cancel $after_id
- sendCommand {close $server}
-} -result {EOF is sticky}
-test socket_$af-11.13 {testing async write, async flush, async close} -setup {
- set port [sendCommand {
- set firstblock ""
- for {set i 0} {$i < 5} {incr i} {
- set firstblock "a$firstblock$firstblock"
- }
- set secondblock ""
- for {set i 0} {$i < 16} {incr i} {
- set secondblock "b$secondblock$secondblock"
- }
- set l [socket -server accept 0]
- proc accept {s a p} {
- fconfigure $s -blocking 0 -translation lf -buffersize 16384 \
- -buffering line
- fileevent $s readable "readable $s"
- }
- proc readable {s} {
- set l [gets $s]
- fileevent $s readable {}
- after idle respond $s
- }
- proc respond {s} {
- global firstblock
- puts -nonewline $s $firstblock
- after idle writedata $s
- }
- proc writedata {s} {
- global secondblock
- puts -nonewline $s $secondblock
- close $s
- }
- getPort $l
- }]
- set timer [after 10000 "set done timed_out"]
-} -constraints [list socket supported_$af doTestsWithRemoteServer] -body {
- proc readit {s} {
- global count done
- set l [read $s]
- incr count [string length $l]
- if {[eof $s]} {
- close $s
- set done 1
- }
- }
- set s [socket $remoteServerIP $port]
- fconfigure $s -blocking 0 -trans lf -buffering line
- set count 0
- puts $s hello
- fileevent $s readable "readit $s"
- vwait done
- return $count
-} -cleanup {
- after cancel $timer
- sendCommand {close $l}
-} -result 65566
-
-set path(script1) [makeFile {} script1]
-set path(script2) [makeFile {} script2]
-
-test socket_$af-12.1 {testing inheritance of server sockets} -setup {
- file delete $path(script1)
- file delete $path(script2)
- # Script1 is just a 10 second delay. If the server socket is inherited, it
- # will be held open for 10 seconds
- set f [open $path(script1) w]
- puts $f {
- fileevent stdin readable exit
- after 10000 exit
- vwait forever
- }
- close $f
- # Script2 creates the server socket, launches script1, and exits.
- # The server socket will now be closed unless script1 inherited it.
- set f [open $path(script2) w]
- puts $f [list set tcltest [interpreter]]
- puts $f [list set delay $path(script1)]
- puts $f [list set localhost $localhost]
- puts $f {
- set f [socket -server accept -myaddr $localhost 0]
- proc accept { file addr port } {
- close $file
- }
- exec $tcltest $delay &
- puts [lindex [fconfigure $f -sockname] 2]
- close $f
- exit
- }
- close $f
-} -constraints [list socket supported_$af stdio exec] -body {
- # Launch script2 and wait 5 seconds
- ### exec [interpreter] script2 &
- set p [open "|[list [interpreter] $path(script2)]" r]
- # If we can still connect to the server, the socket got inherited.
- if {[catch {close [socket $localhost $listen]}]} {
- return {server socket was not inherited}
- } else {
- return {server socket was inherited}
- }
-} -cleanup {
- catch {close $p}
-} -result {server socket was not inherited}
-test socket_$af-12.2 {testing inheritance of client sockets} -setup {
- file delete $path(script1)
- file delete $path(script2)
- # Script1 is just a 20 second delay. If the server socket is inherited, it
- # will be held open for 20 seconds
- set f [open $path(script1) w]
- puts $f {
- fileevent stdin readable exit
- after 20000 exit
- vwait forever
- }
- close $f
- # Script2 opens the client socket and writes to it. It then launches
- # script1 and exits. If the child process inherited the client socket, the
- # socket will still be open.
- set f [open $path(script2) w]
- puts $f [list set tcltest [interpreter]]
- puts $f [list set delay $path(script1)]
- puts $f [list set localhost $localhost]
- puts $f {
- gets stdin port
- set f [socket $localhost $port]
- exec $tcltest $delay &
- puts $f testing
- flush $f
- exit
- }
- close $f
- # If the socket doesn't hit end-of-file in 10 seconds, the script1 process
- # must have inherited the client.
- set timeout 0
- set after [after 10000 {set x "client socket was inherited"}]
-} -constraints [list socket supported_$af stdio exec] -body {
- # Create the server socket
- set server [socket -server accept -myaddr $localhost 0]
- proc accept { file host port } {
- # When the client connects, establish the read handler
- global server
- close $server
- fileevent $file readable [list getdata $file]
- fconfigure $file -buffering line -blocking 0
- set ::f $file
- }
- proc getdata { file } {
- # Read handler on the accepted socket.
- global x
- set status [catch {read $file} data]
- if {$status != 0} {
- set x "read failed, error was $data"
- } elseif {$data ne ""} {
- } elseif {[fblocked $file]} {
- } elseif {[eof $file]} {
- set x "client socket was not inherited"
- } else {
- set x "impossible case"
- }
- }
- # Launch the script2 process
- ### exec [interpreter] script2 &
- set p [open "|[list [interpreter] $path(script2)]" w]
- puts $p [lindex [fconfigure $server -sockname] 2] ; flush $p
- vwait x
- return $x
-} -cleanup {
- fconfigure $f -blocking 1
- close $f
- after cancel $after
- close $p
-} -result {client socket was not inherited}
-test socket_$af-12.3 {testing inheritance of accepted sockets} -setup {
- file delete $path(script1)
- file delete $path(script2)
- set f [open $path(script1) w]
- puts $f {
- fileevent stdin readable exit
- after 10000 exit
- vwait forever
- }
- close $f
- set f [open $path(script2) w]
- puts $f [list set tcltest [interpreter]]
- puts $f [list set delay $path(script1)]
- puts $f [list set localhost $localhost]
- puts $f {
- set server [socket -server accept -myaddr $localhost 0]
- proc accept { file host port } {
- global tcltest delay
- puts $file {test data on socket}
- exec $tcltest $delay &
- after idle exit
- }
- puts stdout [lindex [fconfigure $server -sockname] 2]
- vwait forever
- }
- close $f
-} -constraints [list socket supported_$af stdio exec] -body {
- # Launch the script2 process and connect to it. See how long the socket
- # stays open
- ## exec [interpreter] script2 &
- set p [open "|[list [interpreter] $path(script2)]" r]
- gets $p listen
- set f [socket $localhost $listen]
- fconfigure $f -buffering full -blocking 0
- fileevent $f readable [list getdata $f]
- # If the socket is still open after 5 seconds, the script1 process must
- # have inherited the accepted socket.
- set failed 0
- set after [after 5000 [list set x "accepted socket was inherited"]]
- proc getdata { file } {
- # Read handler on the client socket.
- global x
- global failed
- set status [catch {read $file} data]
- if {$status != 0} {
- set x "read failed, error was $data"
- } elseif {[string compare {} $data]} {
- } elseif {[fblocked $file]} {
- } elseif {[eof $file]} {
- set x "accepted socket was not inherited"
- } else {
- set x "impossible case"
- }
- return
- }
- vwait x
- set x
-} -cleanup {
- fconfigure $f -blocking 1
- close $f
- after cancel $after
- close $p
-} -result {accepted socket was not inherited}
-
-test socket_$af-13.1 {Testing use of shared socket between two threads} -body {
- # create a thread
- set serverthread [thread::create -preserved [string map [list @localhost@ $localhost] {
- set f [socket -server accept -myaddr @localhost@ 0]
- set listen [lindex [fconfigure $f -sockname] 2]
- proc accept {s a p} {
- fileevent $s readable [list echo $s]
- fconfigure $s -buffering line
- }
- proc echo {s} {
- global i
- set l [gets $s]
- if {[eof $s]} {
- global x
- close $s
- set x done
- } else {
- incr i
- puts $s $l
- }
- }
- set i 0
- vwait x
- close $f
- }]]
- set port [thread::send $serverthread {set listen}]
- set s [socket $localhost $port]
- fconfigure $s -buffering line
- catch {
- puts $s "hello"
- gets $s result
- }
- close $s
- thread::release $serverthread
- append result " " [llength [thread::names]]
-} -result {hello 1} -constraints [list socket supported_$af thread]
-
-# ----------------------------------------------------------------------
-
-removeFile script1
-removeFile script2
-
-# cleanup
-if {$remoteProcChan ne ""} {
- catch {sendCommand exit}
-}
-catch {close $commandSocket}
-catch {close $remoteProcChan}
-}
-unset ::tcl::unsupported::socketAF
-test socket-14.0.0 {[socket -async] when server only listens on IPv4} \
- -constraints {socket supported_inet localhost_v4} \
- -setup {
- proc accept {s a p} {
- global x
- puts $s bye
- close $s
- set x ok
- }
- set server [socket -server accept -myaddr 127.0.0.1 0]
- set port [lindex [fconfigure $server -sockname] 2]
- } -body {
- set client [socket -async localhost $port]
- set after [after $latency {set x [fconfigure $client -error]}]
- vwait x
- set x
- } -cleanup {
- after cancel $after
- close $server
- close $client
- unset x
- } -result ok
-test socket-14.0.1 {[socket -async] when server only listens on IPv6} \
- -constraints {socket supported_inet6 localhost_v6} \
- -setup {
- proc accept {s a p} {
- global x
- puts $s bye
- close $s
- set x ok
- }
- set server [socket -server accept -myaddr ::1 0]
- set port [lindex [fconfigure $server -sockname] 2]
- } -body {
- set client [socket -async localhost $port]
- set after [after $latency {set x [fconfigure $client -error]}]
- vwait x
- set x
- } -cleanup {
- after cancel $after
- close $server
- close $client
- unset x
- } -result ok
-test socket-14.1 {[socket -async] fileevent while still connecting} \
- -constraints {socket} \
- -setup {
- proc accept {s a p} {
- global x
- puts $s bye
- close $s
- lappend x ok
- }
- set server [socket -server accept -myaddr localhost 0]
- set port [lindex [fconfigure $server -sockname] 2]
- set x ""
- } -body {
- set client [socket -async localhost $port]
- fileevent $client writable {
- lappend x [fconfigure $client -error]
- fileevent $client writable {}
- }
- set after [after $latency {lappend x timeout}]
- while {[llength $x] < 2 && "timeout" ni $x} {
- vwait x
- }
- lsort $x; # we only want to see both events, the order doesn't matter
- } -cleanup {
- after cancel $after
- close $server
- close $client
- unset x
- } -result {{} ok}
-test socket-14.2 {[socket -async] fileevent connection refused} \
- -constraints {socket} \
- -body {
- set client [socket -async localhost [randport]]
- fileevent $client writable {set x ok}
- set after [after $latency {set x timeout}]
- vwait x
- after cancel $after
- lappend x [fconfigure $client -error]
- } -cleanup {
- after cancel $after
- close $client
- unset x after client
- } -result {ok {connection refused}}
-test socket-14.3 {[socket -async] when server only listens on IPv6} \
- -constraints {socket supported_inet6 localhost_v6} \
- -setup {
- proc accept {s a p} {
- global x
- puts $s bye
- close $s
- set x ok
- }
- set server [socket -server accept -myaddr ::1 0]
- set port [lindex [fconfigure $server -sockname] 2]
- } -body {
- set client [socket -async localhost $port]
- set after [after $latency {set x [fconfigure $client -error]}]
- vwait x
- set x
- } -cleanup {
- after cancel $after
- close $server
- close $client
- unset x
- } -result ok
-test socket-14.4 {[socket -async] and both, readdable and writable fileevents} \
- -constraints {socket} \
- -setup {
- proc accept {s a p} {
- puts $s bye
- close $s
- }
- set server [socket -server accept -myaddr localhost 0]
- set port [lindex [fconfigure $server -sockname] 2]
- set x ""
- } -body {
- set client [socket -async localhost $port]
- fileevent $client writable {
- lappend x [fconfigure $client -error]
- fileevent $client writable {}
- }
- fileevent $client readable {lappend x [gets $client]}
- set after [after $latency {lappend x timeout}]
- while {[llength $x] < 2 && "timeout" ni $x} {
- vwait x
- }
- lsort $x
- } -cleanup {
- after cancel $after
- close $client
- close $server
- unset x
- } -result {{} bye}
-# FIXME: we should also have an IPv6 counterpart of this
-test socket-14.5 {[socket -async] which fails before any connect() can be made} \
- -constraints {socket supported_inet} \
- -body {
- # address from rfc5737
- socket -async -myaddr 192.0.2.42 127.0.0.1 [randport]
- } \
- -returnCodes 1 \
- -result {couldn't open socket: cannot assign requested address}
-test socket-14.6.0 {[socket -async] with no event loop and server listening on IPv4} \
- -constraints {socket supported_inet localhost_v4} \
- -setup {
- proc accept {s a p} {
- global x
- puts $s bye
- close $s
- set x ok
- }
- set server [socket -server accept -myaddr 127.0.0.1 0]
- set port [lindex [fconfigure $server -sockname] 2]
- set x ""
- } \
- -body {
- set client [socket -async localhost $port]
- for {set i 0} {$i < 50} {incr i } {
- update
- if {$x ne ""} {
- lappend x [gets $client]
- break
- }
- after 100
- }
- set x
- } \
- -cleanup {
- close $server
- close $client
- unset x
- } \
- -result {ok bye}
-test socket-14.6.1 {[socket -async] with no event loop and server listening on IPv6} \
- -constraints {socket supported_inet6 localhost_v6} \
- -setup {
- proc accept {s a p} {
- global x
- puts $s bye
- close $s
- set x ok
- }
- set server [socket -server accept -myaddr ::1 0]
- set port [lindex [fconfigure $server -sockname] 2]
- set x ""
- } \
- -body {
- set client [socket -async localhost $port]
- for {set i 0} {$i < 50} {incr i } {
- update
- if {$x ne ""} {
- lappend x [gets $client]
- break
- }
- after 100
- }
- set x
- } \
- -cleanup {
- close $server
- close $client
- unset x
- } \
- -result {ok bye}
-test socket-14.7.0 {pending [socket -async] and blocking [gets], server is IPv4} \
- -constraints {socket supported_inet localhost_v4} \
- -setup {
- makeFile {
- fileevent stdin readable exit
- set server [socket -server accept -myaddr 127.0.0.1 0]
- proc accept {s h p} {puts $s ok; close $s; set ::x 1}
- puts [lindex [fconfigure $server -sockname] 2]
- flush stdout
- vwait x
- } script
- set fd [open |[list [interpreter] script] RDWR]
- set port [gets $fd]
- } -body {
- set sock [socket -async localhost $port]
- list [fconfigure $sock -error] [gets $sock] [fconfigure $sock -error]
- } -cleanup {
- close $fd
- close $sock
- removeFile script
- } -result {{} ok {}}
-test socket-14.7.1 {pending [socket -async] and blocking [gets], server is IPv6} \
- -constraints {socket supported_inet6 localhost_v6} \
- -setup {
- makeFile {
- fileevent stdin readable exit
- set server [socket -server accept -myaddr ::1 0]
- proc accept {s h p} {puts $s ok; close $s; set ::x 1}
- puts [lindex [fconfigure $server -sockname] 2]
- flush stdout
- vwait x
- } script
- set fd [open |[list [interpreter] script] RDWR]
- set port [gets $fd]
- } -body {
- set sock [socket -async localhost $port]
- list [fconfigure $sock -error] [gets $sock] [fconfigure $sock -error]
- } -cleanup {
- close $fd
- close $sock
- removeFile script
- } -result {{} ok {}}
-test socket-14.7.2 {pending [socket -async] and blocking [gets], no listener} \
- -constraints {socket} \
- -body {
- set sock [socket -async localhost [randport]]
- catch {gets $sock} x
- list $x [fconfigure $sock -error] [fconfigure $sock -error]
- } -cleanup {
- close $sock
- } -match glob -result {{error reading "sock*": socket is not connected} {connection refused} {}}
-test socket-14.8.0 {pending [socket -async] and nonblocking [gets], server is IPv4} \
- -constraints {socket supported_inet localhost_v4} \
- -setup {
- makeFile {
- fileevent stdin readable exit
- set server [socket -server accept -myaddr 127.0.0.1 0]
- proc accept {s h p} {puts $s ok; close $s; set ::x 1}
- puts [lindex [fconfigure $server -sockname] 2]
- flush stdout
- vwait x
- } script
- set fd [open |[list [interpreter] script] RDWR]
- set port [gets $fd]
- } -body {
- set sock [socket -async localhost $port]
- fconfigure $sock -blocking 0
- for {set i 0} {$i < 50} {incr i } {
- if {[catch {gets $sock} x] || $x ne "" || ![fblocked $sock]} break
- after 200
- }
- set x
- } -cleanup {
- close $fd
- close $sock
- removeFile script
- } -result {ok}
-test socket-14.8.1 {pending [socket -async] and nonblocking [gets], server is IPv6} \
- -constraints {socket supported_inet6 localhost_v6} \
- -setup {
- makeFile {
- fileevent stdin readable exit
- set server [socket -server accept -myaddr ::1 0]
- proc accept {s h p} {puts $s ok; close $s; set ::x 1}
- puts [lindex [fconfigure $server -sockname] 2]
- flush stdout
- vwait x
- } script
- set fd [open |[list [interpreter] script] RDWR]
- set port [gets $fd]
- } -body {
- set sock [socket -async localhost $port]
- fconfigure $sock -blocking 0
- for {set i 0} {$i < 50} {incr i } {
- if {[catch {gets $sock} x] || $x ne "" || ![fblocked $sock]} break
- after 200
- }
- set x
- } -cleanup {
- close $fd
- close $sock
- removeFile script
- } -result {ok}
-test socket-14.8.2 {pending [socket -async] and nonblocking [gets], no listener} \
- -constraints {socket} \
- -body {
- set sock [socket -async localhost [randport]]
- fconfigure $sock -blocking 0
- for {set i 0} {$i < 50} {incr i } {
- if {[catch {gets $sock} x] || $x ne "" || ![fblocked $sock]} break
- after 200
- }
- list $x [fconfigure $sock -error] [fconfigure $sock -error]
- } -cleanup {
- close $sock
- } -match glob -result {{error reading "sock*": socket is not connected} {connection refused} {}}
-test socket-14.9.0 {pending [socket -async] and blocking [puts], server is IPv4} \
- -constraints {socket supported_inet localhost_v4} \
- -setup {
- makeFile {
- fileevent stdin readable exit
- set server [socket -server accept -myaddr 127.0.0.1 0]
- proc accept {s h p} {set ::x $s}
- puts [lindex [fconfigure $server -sockname] 2]
- flush stdout
- vwait x
- puts [gets $x]
- } script
- set fd [open |[list [interpreter] script] RDWR]
- set port [gets $fd]
- } -body {
- set sock [socket -async localhost $port]
- puts $sock ok
- flush $sock
- list [fconfigure $sock -error] [gets $fd]
- } -cleanup {
- close $fd
- close $sock
- removeFile script
- } -result {{} ok}
-test socket-14.9.1 {pending [socket -async] and blocking [puts], server is IPv6} \
- -constraints {socket supported_inet6 localhost_v6} \
- -setup {
- makeFile {
- fileevent stdin readable exit
- set server [socket -server accept -myaddr ::1 0]
- proc accept {s h p} {set ::x $s}
- puts [lindex [fconfigure $server -sockname] 2]
- flush stdout
- vwait x
- puts [gets $x]
- } script
- set fd [open |[list [interpreter] script] RDWR]
- set port [gets $fd]
- } -body {
- set sock [socket -async localhost $port]
- puts $sock ok
- flush $sock
- list [fconfigure $sock -error] [gets $fd]
- } -cleanup {
- close $fd
- close $sock
- removeFile script
- } -result {{} ok}
-test socket-14.10.0 {pending [socket -async] and nonblocking [puts], server is IPv4} \
- -constraints {socket supported_inet localhost_v4} \
- -setup {
- makeFile {
- fileevent stdin readable exit
- set server [socket -server accept -myaddr 127.0.0.1 0]
- proc accept {s h p} {set ::x $s}
- puts [lindex [fconfigure $server -sockname] 2]
- flush stdout
- vwait x
- puts [gets $x]
- } script
- set fd [open |[list [interpreter] script] RDWR]
- set port [gets $fd]
- } -body {
- set sock [socket -async localhost $port]
- fconfigure $sock -blocking 0
- puts $sock ok
- flush $sock
- fileevent $fd readable {set x 1}
- vwait x
- list [fconfigure $sock -error] [gets $fd]
- } -cleanup {
- close $fd
- close $sock
- removeFile script
- } -result {{} ok}
-test socket-14.10.1 {pending [socket -async] and nonblocking [puts], server is IPv6} \
- -constraints {socket supported_inet6 localhost_v6} \
- -setup {
- makeFile {
- fileevent stdin readable exit
- set server [socket -server accept -myaddr ::1 0]
- proc accept {s h p} {set ::x $s}
- puts [lindex [fconfigure $server -sockname] 2]
- flush stdout
- vwait x
- puts [gets $x]
- } script
- set fd [open |[list [interpreter] script] RDWR]
- set port [gets $fd]
- } -body {
- set sock [socket -async localhost $port]
- fconfigure $sock -blocking 0
- puts $sock ok
- flush $sock
- fileevent $fd readable {set x 1}
- vwait x
- list [fconfigure $sock -error] [gets $fd]
- } -cleanup {
- close $fd
- close $sock
- removeFile script
- } -result {{} ok}
-test socket-14.11.0 {pending [socket -async] and nonblocking [puts], no listener, no flush} \
- -constraints {socket} \
- -body {
- set sock [socket -async localhost [randport]]
- fconfigure $sock -blocking 0
- puts $sock ok
- fileevent $sock writable {set x 1}
- vwait x
- close $sock
- } -cleanup {
- catch {close $sock}
- unset x
- } -result {socket is not connected} -returnCodes 1
-test socket-14.11.1 {pending [socket -async] and nonblocking [puts], no listener, flush} \
- -constraints {socket nonPortable} \
- -body {
- set sock [socket -async localhost [randport]]
- fconfigure $sock -blocking 0
- puts $sock ok
- flush $sock
- fileevent $sock writable {set x 1}
- vwait x
- close $sock
- } -cleanup {
- catch {close $sock}
- catch {unset x}
- } -result {socket is not connected} -returnCodes 1
-test socket-14.12 {[socket -async] background progress triggered by [fconfigure -error]} \
- -constraints {socket} \
- -body {
- set s [socket -async localhost [randport]]
- for {set i 0} {$i < 50} {incr i} {
- set x [fconfigure $s -error]
- if {$x != ""} break
- after 200
- }
- set x
- } -cleanup {
- close $s
- unset x s
- } -result {connection refused}
-
-test socket-14.13 {testing writable event when quick failure} \
- -constraints {socket win supported_inet} \
- -body {
- # Test for bug 336441ed59 where a quick background fail was ignored
-
- # Test only for windows as socket -async 255.255.255.255 fails
- # directly on unix
-
- # The following connect should fail very quickly
- set a1 [after 2000 {set x timeout}]
- set s [socket -async 255.255.255.255 43434]
- fileevent $s writable {set x writable}
- vwait x
- set x
-} -cleanup {
- catch {close $s}
- after cancel $a1
-} -result writable
-
-test socket-14.14 {testing fileevent readable on failed async socket connect} \
- -constraints {socket} -body {
- # Test for bug 581937ab1e
-
- set a1 [after 5000 {set x timeout}]
- # This connect should fail
- set s [socket -async localhost [randport]]
- fileevent $s readable {set x readable}
- vwait x
- set x
-} -cleanup {
- catch {close $s}
- after cancel $a1
-} -result readable
-
-test socket-14.15 {blocking read on async socket should not trigger event handlers} \
- -constraints socket -body {
- set s [socket -async localhost [randport]]
- set x ok
- fileevent $s writable {set x fail}
- catch {read $s}
- close $s
- set x
- } -result ok
-
-# v4 and v6 is required to prevent that the async connect does not terminate
-# before the fconfigure command. There is always an additional ip to try.
-test socket-14.16 {empty -peername while [socket -async] connecting} \
- -constraints {socket localhost_v4 localhost_v6} \
- -body {
- set client [socket -async localhost [randport]]
- fconfigure $client -peername
- } -cleanup {
- catch {close $client}
- } -result {}
-
-# v4 and v6 is required to prevent that the async connect does not terminate
-# before the fconfigure command. There is always an additional ip to try.
-test socket-14.17 {empty -sockname while [socket -async] connecting} \
- -constraints {socket localhost_v4 localhost_v6} \
- -body {
- set client [socket -async localhost [randport]]
- fconfigure $client -sockname
- } -cleanup {
- catch {close $client}
- } -result {}
-
-# test for bug c6ed4acfd8: running async socket connect with other connect
-# established will block tcl as it goes in an infinite loop in vwait
-test socket-14.18 {bug c6ed4acfd8: running async socket connect made other connect block} \
- -constraints {socket} \
- -body {
- proc accept {channel address port} {}
- set port [randport]
- set ssock [socket -server accept $port]
- set csock1 [socket -async localhost [randport]]
- set csock2 [socket localhost $port]
- after 1000 {set done ok}
- vwait done
-} -cleanup {
- catch {close $ssock}
- catch {close $csock1}
- catch {close $csock2}
- } -result {}
-
-set num 0
-
-set x {localhost {socket} 127.0.0.1 {supported_inet} ::1 {supported_inet6}}
-set resultok {-result "sock*" -match glob}
-set resulterr {
- -result {couldn't open socket: connection refused}
- -returnCodes 1
-}
-foreach {servip sc} $x {
- foreach {cliip cc} $x {
- set constraints socket
- lappend constraints $sc $cc
- set result $resulterr
- switch -- [lsort -unique [list $servip $cliip]] {
- localhost - 127.0.0.1 - ::1 {
- set result $resultok
- }
- {127.0.0.1 localhost} {
- if {[testConstraint localhost_v4]} {
- set result $resultok
- }
- }
- {::1 localhost} {
- if {[testConstraint localhost_v6]} {
- set result $resultok
- }
- }
- }
- test socket-15.1.$num "Connect to $servip from $cliip" \
- -constraints $constraints -setup {
- set server [socket -server accept -myaddr $servip 0]
- proc accept {s h p} { close $s }
- set port [lindex [fconfigure $server -sockname] 2]
- } -body {
- set s [socket $cliip $port]
- } -cleanup {
- close $server
- catch {close $s}
- } {*}$result
- incr num
- }
-}
-
-::tcltest::cleanupTests
-flush stdout
-return
-
-# Local Variables:
-# mode: tcl
-# fill-column: 78
-# End:
generated by cgit v0.12 at 2024-07-05 11:13:36 (GMT)