diff options
Diffstat (limited to 'tclxml/win/makefile.vc')
-rw-r--r-- | tclxml/win/makefile.vc | 564 |
1 files changed, 0 insertions, 564 deletions
diff --git a/tclxml/win/makefile.vc b/tclxml/win/makefile.vc deleted file mode 100644 index ae15eb8..0000000 --- a/tclxml/win/makefile.vc +++ /dev/null @@ -1,564 +0,0 @@ -# makefile.vc -- -*- Makefile -*- -# -# Microsoft Visual C++ makefile for use with nmake.exe v1.62+ (VC++ 5.0+) -# -# This makefile is based upon the Tcl 8.4 Makefile.vc and modified to -# make it suitable as a general package makefile. Look for the word EDIT -# which marks sections that may need modification. As a minumum you will -# need to change the PROJECT, DOTVERSION and DLLOBJS variables to values -# relevant to your package. -# -# See the file "license.terms" for information on usage and redistribution -# of this file, and for a DISCLAIMER OF ALL WARRANTIES. -# -# Copyright (c) 1995-1996 Sun Microsystems, Inc. -# Copyright (c) 1998-2000 Ajuba Solutions. -# Copyright (c) 2001 ActiveState Corporation. -# Copyright (c) 2001-2002 David Gravereaux. -# Copyright (c) 2003 Pat Thoyts -# Copyright (c) 2004 Zveno Pty Ltd -# -#------------------------------------------------------------------------- -# RCS: @(#)$Id: makefile.vc,v 1.1.1.1 2009/01/16 22:11:49 joye Exp $ -#------------------------------------------------------------------------- - -!if "$(MSVCDIR)" == "" -MSG = ^ -You will need to run vcvars32.bat from Developer Studio, first, to setup^ -the environment. Jump to this line to read the new instructions. -!error $(MSG) -!endif - -#------------------------------------------------------------------------------ -# HOW TO USE this makefile: -# -# 1) It is now necessary to have %MSVCDir% set in the environment. This is -# used as a check to see if vcvars32.bat had been run prior to running -# nmake or during the installation of Microsoft Visual C++, MSVCDir had -# been set globally and the PATH adjusted. Either way is valid. -# -# You'll need to run vcvars32.bat contained in the MsDev's vc(98)/bin -# directory to setup the proper environment, if needed, for your current -# setup. This is a needed bootstrap requirement and allows the swapping of -# different environments to be easier. -# -# 2) To use the Platform SDK (not expressly needed), run setenv.bat after -# vcvars32.bat according to the instructions for it. This can also turn on -# the 64-bit compiler, if your SDK has it. -# -# 3) Targets are: -# all -- Builds everything. -# <project> -- Builds the project (eg: nmake sample) -# test -- Builds and runs the test suite. -# install -- Installs the built binaries and libraries to $(INSTALLDIR) -# in an appropriate subdirectory. -# clean/realclean/distclean -- varying levels of cleaning. -# -# 4) Macros usable on the commandline: -# INSTALLDIR=<path> -# Sets where to install Tcl from the built binaries. -# C:\Progra~1\Tcl is assumed when not specified. -# -# OPTS=static,msvcrt,staticpkg,threads,symbols,profile,loimpact,none -# Sets special options for the core. The default is for none. -# Any combination of the above may be used (comma separated). -# 'none' will over-ride everything to nothing. -# -# static = Builds a static library of the core instead of a -# dll. The shell will be static (and large), as well. -# msvcrt = Effects the static option only to switch it from -# using libcmt(d) as the C runtime [by default] to -# msvcrt(d). This is useful for static embedding -# support. -# staticpkg = Effects the static option only to switch -# tclshXX.exe to have the dde and reg extension linked -# inside it. -# threads = Turns on full multithreading support. -# thrdalloc = Use the thread allocator (shared global free pool). -# symbols = Adds symbols for step debugging. -# profile = Adds profiling hooks. Map file is assumed. -# loimpact = Adds a flag for how NT treats the heap to keep memory -# in use, low. This is said to impact alloc performance. -# -# STATS=memdbg,compdbg,none -# Sets optional memory and bytecode compiler debugging code added -# to the core. The default is for none. Any combination of the -# above may be used (comma separated). 'none' will over-ride -# everything to nothing. -# -# memdbg = Enables the debugging memory allocator. -# compdbg = Enables byte compilation logging. -# -# MACHINE=(IX86|IA64|ALPHA) -# Set the machine type used for the compiler, linker, and -# resource compiler. This hook is needed to tell the tools -# when alternate platforms are requested. IX86 is the default -# when not specified. -# -# TMP_DIR=<path> -# OUT_DIR=<path> -# Hooks to allow the intermediate and output directories to be -# changed. $(OUT_DIR) is assumed to be -# $(BINROOT)\(Release|Debug) based on if symbols are requested. -# $(TMP_DIR) will de $(OUT_DIR)\<buildtype> by default. -# -# TESTPAT=<file> -# Reads the tests requested to be run from this file. -# -# CFG_ENCODING=encoding -# name of encoding for configuration information. Defaults -# to cp1252 -# -# 5) Examples: -# -# Basic syntax of calling nmake looks like this: -# nmake [-nologo] -f makefile.vc [target|macrodef [target|macrodef] [...]] -# -# Standard (no frills) -# c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat -# Setting environment for using Microsoft Visual C++ tools. -# c:\tcl_src\win\>nmake -f makefile.vc all -# c:\tcl_src\win\>nmake -f makefile.vc install INSTALLDIR=c:\progra~1\tcl -# -# Building for Win64 -# c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat -# Setting environment for using Microsoft Visual C++ tools. -# c:\tcl_src\win\>c:\progra~1\platfo~1\setenv.bat /pre64 /RETAIL -# Targeting Windows pre64 RETAIL -# c:\tcl_src\win\>nmake -f makefile.vc MACHINE=IA64 -# -#------------------------------------------------------------------------------ -#============================================================================== -############################################################################### -#------------------------------------------------------------------------------ - -!if !exist("makefile.vc") -MSG = ^ -You must run this makefile only from the directory it is in.^ -Please `cd` to its location first. -!error $(MSG) -!endif - -#------------------------------------------------------------------------- -# Project specific information (EDIT) -# -# You should edit this with the name and version of your project. This -# information is used to generate the name of the package library and -# it's install location. -# -# For example, the sample extension is going to build sample04.dll and -# would install it into $(INSTALLDIR)\lib\sample04 -# -# You need to specify the object files that need to be linked into your -# binary here. -# -#------------------------------------------------------------------------- - -PROJECT = Tclxml -!include "rules.vc" - -DOTVERSION = 3.1 -VERSION = $(DOTVERSION:.=) -STUBPREFIX = $(PROJECT)stub - -#-- Use this line for VC++ 6.0 -#WSOCKLIB = "C:\Program Files\Microsoft Visual Studio\VC98\Lib\WSOCK32.LIB" -#-- Use this line for VC++ .NET 2003 -WSOCKLIB = "C:\Program Files\Microsoft Visual Studio .NET 2003\Vc7\PlatformSDK\Lib\WSOCK32.LIB" - -DLLOBJS = \ - $(TMP_DIR)\tclxml.obj -PRJSTUBOBJS = \ - $(TMP_DIR)\tclxmlStubInit.obj \ - $(TMP_DIR)\tclxmlStubLib.obj -EXPATDLLOBJS = \ - $(TMP_DIR)\tclexpat.obj \ - $(TMP_DIR)\xmltok.obj \ - $(TMP_DIR)\xmlrole.obj \ - $(TMP_DIR)\xmlwf.obj \ - $(TMP_DIR)\xmlfile.obj \ - $(TMP_DIR)\codepage.obj \ - $(TMP_DIR)\hashtable.obj \ - $(TMP_DIR)\win32filemap.obj \ - $(TMP_DIR)\xmlparse.obj -LIBXML2DLLOBJS = \ - $(TMP_DIR)\tcllibxml2.obj \ - $(TMP_DIR)\docObj.obj -LIBXML2STUBOBJS = \ - $(TMP_DIR)\tcllibxml2StubInit.obj - -#------------------------------------------------------------------------- -# Target names and paths ( shouldn't need changing ) -#------------------------------------------------------------------------- - -BINROOT = . -ROOT = .. - -PRJIMPLIB = $(OUT_DIR)\$(PROJECT)$(VERSION)$(SUFX).lib -PRJLIBNAME = $(PROJECT)$(VERSION)$(SUFX).$(EXT) -PRJLIB = $(OUT_DIR)\$(PRJLIBNAME) - -PRJSTUBLIBNAME = $(STUBPREFIX)$(VERSION).lib -PRJSTUBLIB = $(OUT_DIR)\$(PRJSTUBLIBNAME) - -EXPATIMPLIB = $(OUT_DIR)\expat$(VERSION)$(SUFX).lib -EXPATLIBNAME = expat$(VERSION)$(SUFX).$(EXT) -EXPATLIB = $(OUT_DIR)\$(EXPATLIBNAME) - -EXPATSTUBLIBNAME = expatstub$(VERSION).lib -EXPATSTUBLIB = $(OUT_DIR)\$(EXPATSTUBLIBNAME) - -LIBXML2IMPLIB = $(OUT_DIR)\tcllibxml2$(VERSION)$(SUFX).lib -LIBXML2LIBNAME = tcllibxml2$(VERSION)$(SUFX).$(EXT) -LIBXML2LIB = $(OUT_DIR)\$(LIBXML2LIBNAME) - -LIBXML2STUBLIBNAME = tcllibxml2stub$(VERSION).lib -LIBXML2STUBLIB = $(OUT_DIR)\$(LIBXML2STUBLIBNAME) - -### Make sure we use backslash only. -LIB_INSTALL_DIR = $(_INSTALLDIR)\lib -BIN_INSTALL_DIR = $(_INSTALLDIR)\bin -DOC_INSTALL_DIR = $(_INSTALLDIR)\doc -SCRIPT_INSTALL_DIR = $(_INSTALLDIR)\lib\$(PROJECT)$(DOTVERSION) -EXPAT_INSTALL_DIR = $(_INSTALLDIR)\lib\Tclexpat$(DOTVERSION) -LIBXML2_INSTALL_DIR = $(_INSTALLDIR)\lib\Tcllibxml$(DOTVERSION) -INCLUDE_INSTALL_DIR = $(_INSTALLDIR)\include - -### The following paths CANNOT have spaces in them. -GENERICDIR = $(ROOT) -EXPATDIR = $(ROOT)\expat -TCLLIBXML2DIR = $(ROOT)\libxml2 -WINDIR = $(ROOT)\win -LIBDIR = $(ROOT)\library -DOCDIR = $(ROOT)\doc -TOOLSDIR = $(ROOT)\tools -COMPATDIR = $(ROOT)\compat -INCLUDEDIR = $(ROOT)\include - -### Find a tclsh for testing and installation. -!if !exist("$(TCLSH)") -TCLSH = $(BIN_INSTALL_DIR)\tclsh$(TCL_VERSION).exe -!endif - -#--------------------------------------------------------------------- -# Compile flags -#--------------------------------------------------------------------- - -!if !$(DEBUG) -!if $(OPTIMIZING) -### This cranks the optimization level to maximize speed -cdebug = -O2 -Op -Gs -!else -cdebug = -!endif -!else if "$(MACHINE)" == "IA64" -### Warnings are too many, can't support warnings into errors. -cdebug = -Z7 -Od -!else -cdebug = -Z7 -WX -Od -!endif - -### Declarations common to all compiler options -cflags = -nologo -c -W3 -YX -Fp$(TMP_DIR)^\ - -!if $(PENT_0F_ERRATA) -cflags = $(cflags) -QI0f -!endif - -!if $(ITAN_B_ERRATA) -cflags = $(cflags) -QIA64_Bx -!endif - -!if $(MSVCRT) -!if $(DEBUG) -crt = -MDd -!else -crt = -MD -!endif -!else -!if $(DEBUG) -crt = -MTd -!else -crt = -MT -!endif -!endif - -#---------------------------------------------------------- -# TclXML/libxml2 needs libz, libiconv and libxml2 headers -#---------------------------------------------------------- - -!if !defined(LIBZDIR) -MSG=^ -Don't know where libz is. Set the LIBZDIR macro. -!error $(MSG) -!else -_LIBZDIR = $(LIBZDIR:/=\) -!if !exist("$(_LIBZDIR)\include\zlib.h") -MSG=^ -Don't know where zlib.h is. The LIBZDIR macro doesn't appear to be correct. -!error $(MSG) -!endif -!endif - -!if !defined(LIBICONVDIR) -MSG=^ -Don't know where libiconv is. Set the LIBICONVDIR macro. -!error $(MSG) -!else -_LIBICONVDIR = $(LIBICONVDIR:/=\) -!if !exist("$(_LIBICONVDIR)\include\iconv.h") -MSG=^ -Don't know where iconv.h is. The LIBICONVDIR macro doesn't appear to be correct. -!error $(MSG) -!endif -!endif - -!if !defined(LIBXML2DIR) -MSG=^ -Don't know where libxml2 is. Set the LIBXML2DIR macro. -!error $(MSG) -!else -_LIBXML2DIR = $(LIBXML2DIR:/=\) -!if !exist("$(_LIBXML2DIR)\include\libxml\tree.h") -MSG=^ -Don't know where libxml2 tree.h is. The LIBXML2DIR macro doesn't appear to be correct. -!error $(MSG) -!endif -!endif - -TCL_INCLUDES = -I"$(TCLDIR)\include" -I"$(WINDIR)" -I"$(GENERICDIR)" -EXPAT_INCLUDES = -I"$(EXPATDIR)\xmlparse" -I"$(EXPATDIR)\xmltok" -LIBXML2_INCLUDES = -I"$(LIBZDIR)\include" -I"$(LIBICONVDIR)\include" -I"$(LIBXML2DIR)\include" -BASE_CLFAGS = $(cflags) $(cdebug) $(crt) $(TCL_INCLUDES) -I"..\include" -CON_CFLAGS = $(cflags) $(cdebug) $(crt) -DCONSOLE -TCL_CFLAGS = -DUSE_TCL_STUBS -DVERSION="\"$(DOTVERSION)\"" $(BASE_CLFAGS) $(OPTDEFINES) -LIBXML2_CFLAGS = -DTCLXML_LIBXML2_VERSION="\"$(DOTVERSION)\"" - -#--------------------------------------------------------------------- -# Link flags -#--------------------------------------------------------------------- - -!if $(DEBUG) -ldebug = -debug:full -debugtype:cv -!else -ldebug = -release -opt:ref -opt:icf,3 -!endif - -### Declarations common to all linker options -lflags = -nologo -machine:$(MACHINE) $(ldebug) - -!if $(PROFILE) -lflags = $(lflags) -profile -!endif - -!if $(ALIGN98_HACK) && !$(STATIC_BUILD) -### Align sections for PE size savings. -lflags = $(lflags) -opt:nowin98 -!else if !$(ALIGN98_HACK) && $(STATIC_BUILD) -### Align sections for speed in loading by choosing the virtual page size. -lflags = $(lflags) -align:4096 -!endif - -!if $(LOIMPACT) -lflags = $(lflags) -ws:aggressive -!endif - -dlllflags = $(lflags) -dll -conlflags = $(lflags) -subsystem:console -guilflags = $(lflags) -subsystem:windows -baselibs = $(TCLSTUBLIB) - -#--------------------------------------------------------------------- -# TclTest flags -#--------------------------------------------------------------------- - -!IF "$(TESTPAT)" != "" -TESTFLAGS = -file $(TESTPAT) -!ENDIF - -#--------------------------------------------------------------------- -# Project specific targets (EDIT) -#--------------------------------------------------------------------- - -all: setup $(PROJECT) -$(PROJECT): setup $(PRJLIB) $(EXPATLIB) $(LIBXML2LIB) -install: install-binaries install-includes install-libraries install-docs - - -test: setup $(PROJECT) - set TCL_LIBRARY=$(ROOT)/library -!if "$(OS)" == "Windows_NT" || "$(MSVCDIR)" == "IDE" - $(TCLSH) "$(ROOT)/tests/all.tcl" $(TESTFLAGS) -!else - @echo Please wait while the tests are collected... - $(TCLSH) "$(ROOT)/tests/all.tcl" $(TESTFLAGS) > tests.log - type tests.log | more -!endif - -setup: - @if not exist $(OUT_DIR)\nul mkdir $(OUT_DIR) - @if not exist $(TMP_DIR)\nul mkdir $(TMP_DIR) - -$(PRJLIB): $(DLLOBJS) $(PRJSTUBOBJS) - $(link32) $(dlllflags) -out:$@ $(baselibs) $(DLLOBJS) $(PRJSTUBOBJS) - -@del $*.exp - -$(EXPATLIB): $(EXPATDLLOBJS) - $(link32) $(dlllflags) -out:$@ $(baselibs) $(PRJIMPLIB) @<< -$** -<< - -@del $*.exp - -$(LIBXML2LIB): $(LIBXML2DLLOBJS) - $(link32) $(dlllflags) -out:$@ $(baselibs) $(PRJIMPLIB) $(LIBZDIR)\lib\zlib.lib $(LIBICONVDIR)\lib\iconv.lib $(LIBXML2DIR)\lib\libxml2.lib $(WSOCKLIB) @<< -$** -<< - -@del $*.exp - -$(PRJSTUBLIB): $(PRJSTUBOBJS) - $(lib32) -nologo -out:$@ $(PRJSTUBOBJS) -$(EXPATSTUBLIB): $(EXPATSTUBOBJS) - $(lib32) -nologo -out:$@ $(EXPATSTUBOBJS) -$(LIBXML2STUBLIB): $(LIBXML2STUBOBJS) - $(lib32) -nologo -out:$@ $(LIBXML2STUBOBJS) - -#--------------------------------------------------------------------- -# Special case object file targets -#--------------------------------------------------------------------- - -$(TMP_DIR)\tclxml.obj: $(GENERICDIR)\tclxml.c - $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$@ $? - -$(TMP_DIR)\tclexpat.obj: $(GENERICDIR)\tclexpat.c - $(cc32) $(TCL_CFLAGS) $(EXPAT_INCLUDES) -DBUILD_$(PROJECT) -Fo$@ $? - -$(TMP_DIR)\xmltok.obj: $(EXPATDIR)\xmltok\xmltok.c - $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$@ $? - -$(TMP_DIR)\xmlrole.obj: $(EXPATDIR)\xmltok\xmlrole.c - $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$@ $? - -$(TMP_DIR)\xmlwf.obj: $(EXPATDIR)\xmlwf\xmlwf.c - $(cc32) $(TCL_CFLAGS) $(EXPAT_INCLUDES) -DBUILD_$(PROJECT) -Fo$@ $? - -$(TMP_DIR)\xmlfile.obj: $(EXPATDIR)\xmlwf\xmlfile.c - $(cc32) $(TCL_CFLAGS) $(EXPAT_INCLUDES) -DBUILD_$(PROJECT) -Fo$@ $? - -$(TMP_DIR)\codepage.obj: $(EXPATDIR)\xmlwf\codepage.c - $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$@ $? - -$(TMP_DIR)\hashtable.obj: $(EXPATDIR)\xmlparse\hashtable.c - $(cc32) $(TCL_CFLAGS) $(EXPAT_INCLUDES) -DBUILD_$(PROJECT) -Fo$@ $? - -$(TMP_DIR)\win32filemap.obj: $(EXPATDIR)\xmlwf\win32filemap.c - $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$@ $? - -$(TMP_DIR)\xmlparse.obj: $(EXPATDIR)\xmlparse\xmlparse.c - $(cc32) $(TCL_CFLAGS) $(EXPAT_INCLUDES) -DBUILD_$(PROJECT) -Fo$@ $? - -$(TMP_DIR)\tcllibxml2.obj: $(TCLLIBXML2DIR)\tcllibxml2.c - $(cc32) $(TCL_CFLAGS) $(LIBXML2_CFLAGS) $(LIBXML2_INCLUDES) -DBUILD_TclXML_libxml2 -Fo$@ $? - -$(TMP_DIR)\docObj.obj: $(TCLLIBXML2DIR)\docObj.c - $(cc32) $(TCL_CFLAGS) $(LIBXML2_CFLAGS) $(LIBXML2_INCLUDES) -DBUILD_TclXML_libxml2 -Fo$@ $? - -$(TMP_DIR)\tcllibxml2StubInit.obj: $(TCLLIBXML2DIR)\tcllibxml2StubInit.c - $(cc32) $(TCL_CFLAGS) $(LIBXML2_CFLAGS) $(LIBXML2_INCLUDES) -DBUILD_TclXML_libxml2 -Fo$@ $? - -#--------------------------------------------------------------------- -# Implicit rules -#--------------------------------------------------------------------- - -{$(WINDIR)}.c{$(TMP_DIR)}.obj:: - $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<< -$< -<< - -{$(GENERICDIR)}.c{$(TMP_DIR)}.obj:: - $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<< -$< -<< - -{$(COMPATDIR)}.c{$(TMP_DIR)}.obj:: - $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<< -$< -<< - -{$(WINDIR)}.rc{$(TMP_DIR)}.res: - $(rc32) -fo $@ -r -i "$(GENERICDIR)" -D__WIN32__ \ -!if $(DEBUG) - -d DEBUG \ -!endif -!if $(TCL_THREADS) - -d TCL_THREADS \ -!endif -!if $(STATIC_BUILD) - -d STATIC_BUILD \ -!endif - $< - -.SUFFIXES: -.SUFFIXES:.c .rc - -#--------------------------------------------------------------------- -# Installation. (EDIT) -# -# You may need to modify this section to reflect the final distribution -# of your files and possibly to generate documentation. -# -#--------------------------------------------------------------------- - -install-binaries: install-tclxml-binaries install-expat-binaries install-libxml2-binaries - @echo Installing to '$(SCRIPT_INSTALL_DIR)' - -install-tclxml-binaries: - @if not exist $(SCRIPT_INSTALL_DIR)\nul mkdir $(SCRIPT_INSTALL_DIR) - $(CPY) $(PRJLIB) $(SCRIPT_INSTALL_DIR) - $(CPY) $(PRJIMPLIB) $(SCRIPT_INSTALL_DIR) - -install-expat-binaries: - @if not exist $(EXPAT_INSTALL_DIR)\nul mkdir $(EXPAT_INSTALL_DIR) - $(CPY) $(EXPATLIB) $(EXPAT_INSTALL_DIR) - $(CPY) $(EXPATIMPLIB) $(EXPAT_INSTALL_DIR) - @echo package ifneeded xml::expat $(DOTVERSION) [list load [file join $$dir $(EXPATLIBNAME)]] > $(EXPAT_INSTALL_DIR)\pkgIndex.tcl - -install-libxml2-binaries: - @if not exist $(LIBXML2_INSTALL_DIR)\nul mkdir $(LIBXML2_INSTALL_DIR) - $(CPY) $(LIBXML2LIB) $(LIBXML2_INSTALL_DIR) - $(CPY) $(LIBXML2IMPLIB) $(LIBXML2_INSTALL_DIR) - @echo package ifneeded xml::libxml2 $(DOTVERSION) [list load [file join $$dir $(LIBXML2LIBNAME)] Tclxml_libxml2] > $(LIBXML2_INSTALL_DIR)\pkgIndex.tcl - -install-includes: install-tclxml-includes install-expat-includes install-libxml2-includes - @echo Installing to '$(INCLUDE_INSTALL_DIR)' - @if not exist $(INCLUDE_INSTALL_DIR)\nul mkdir $(INCLUDE_INSTALL_DIR) - -install-tclxml-includes: - @if not exist $(INCLUDE_INSTALL_DIR)\tclxml\nul mkdir $(INCLUDE_INSTALL_DIR)\tclxml - $(CPY) $(INCLUDEDIR)\tclxml\*.h $(INCLUDE_INSTALL_DIR)\tclxml - -install-expat-includes: - -install-libxml2-includes: - @if not exist $(INCLUDE_INSTALL_DIR)\tclxml-libxml2\nul mkdir $(INCLUDE_INSTALL_DIR)\tclxml-libxml2 - $(CPY) $(INCLUDEDIR)\tclxml-libxml2\*.h $(INCLUDE_INSTALL_DIR)\tclxml-libxml2 - -install-libraries: - @echo Installing to '$(SCRIPT_INSTALL_DIR)' - @if exist $(LIBDIR)\nul $(CPY) $(LIBDIR)\*.tcl $(SCRIPT_INSTALL_DIR) - $(TCLSH) $(WINDIR)\mkPkgIndex.tcl $(LIBDIR)\pkgIndex.tcl.in $(SCRIPT_INSTALL_DIR)\pkgIndex.tcl VERSION=$(DOTVERSION) Tclxml_LIB_FILE=$(PRJLIBNAME) - -install-docs: - -#--------------------------------------------------------------------- -# Clean up -#--------------------------------------------------------------------- - -clean: - @if exist $(TMP_DIR)\nul $(RMDIR) $(TMP_DIR) - -realclean: clean - @if exist $(OUT_DIR)\nul $(RMDIR) $(OUT_DIR) - -distclean: realclean - @if exist $(WINDIR)\nmakehlp.exe del $(WINDIR)\nmakehlp.exe - @if exist $(WINDIR)\nmakehlp.obj del $(WINDIR)\nmakehlp.obj |