diff options
Diffstat (limited to 'tk8.6/doc/radiobutton.n')
-rw-r--r-- | tk8.6/doc/radiobutton.n | 266 |
1 files changed, 0 insertions, 266 deletions
diff --git a/tk8.6/doc/radiobutton.n b/tk8.6/doc/radiobutton.n deleted file mode 100644 index c79aa23..0000000 --- a/tk8.6/doc/radiobutton.n +++ /dev/null @@ -1,266 +0,0 @@ -'\" -'\" Copyright (c) 1990-1994 The Regents of the University of California. -'\" Copyright (c) 1994-1996 Sun Microsystems, Inc. -'\" -'\" See the file "license.terms" for information on usage and redistribution -'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" -.TH radiobutton n 4.4 Tk "Tk Built-In Commands" -.so man.macros -.BS -'\" Note: do not modify the .SH NAME line immediately below! -.SH NAME -radiobutton \- Create and manipulate 'radiobutton' pick-one widgets -.SH SYNOPSIS -\fBradiobutton\fR \fIpathName \fR?\fIoptions\fR? -.SO -\-activebackground \-disabledforeground \-padx -\-activeforeground \-font \-pady -\-anchor \-foreground \-relief -\-background \-highlightbackground \-takefocus -\-bitmap \-highlightcolor \-text -\-borderwidth \-highlightthickness \-textvariable -\-compound \-image \-underline -\-cursor \-justify \-wraplength -.SE -.SH "WIDGET-SPECIFIC OPTIONS" -.OP \-command command Command -Specifies a Tcl command to associate with the button. This command -is typically invoked when mouse button 1 is released over the button -window. The button's global variable (\fB\-variable\fR option) will -be updated before the command is invoked. -.OP \-height height Height -Specifies a desired height for the button. -If an image or bitmap is being displayed in the button then the value is in -screen units (i.e. any of the forms acceptable to \fBTk_GetPixels\fR); -for text it is in lines of text. -If this option is not specified, the button's desired height is computed -from the size of the image or bitmap or text being displayed in it. -.OP \-indicatoron indicatorOn IndicatorOn -Specifies whether or not the indicator should be drawn. Must be a -proper boolean value. If false, the \fB\-relief\fR option is -ignored and the widget's relief is always sunken if the widget is -selected and raised otherwise. -.OP \-selectcolor selectColor Background -Specifies a background color to use when the button is selected. -If \fB\-indicatoron\fR is true then the color applies to the indicator. -Under Windows, this color is used as the background for the indicator -regardless of the select state. -If \fB\-indicatoron\fR is false, this color is used as the background -for the entire widget, in place of \fB\-background\fR or \fB\-activeBackground\fR, -whenever the widget is selected. -If specified as an empty string then no special color is used for -displaying when the widget is selected. -.OP \-offrelief offRelief OffRelief -Specifies the relief for the checkbutton when the indicator is not drawn and -the checkbutton is off. The default value is -.QW raised . -By setting this option to -.QW flat -and setting \fB\-indicatoron\fR to false and \fB\-overrelief\fR to -.QW raised , -the effect is achieved -of having a flat button that raises on mouse-over and which is -depressed when activated. This is the behavior typically exhibited by -the Align-Left, Align-Right, and Center radiobuttons on the toolbar of a -word-processor, for example. -.OP \-overrelief overRelief OverRelief -Specifies an alternative relief for the radiobutton, to be used when the -mouse cursor is over the widget. This option can be used to make -toolbar buttons, by configuring \fB\-relief flat \-overrelief -raised\fR. If the value of this option is the empty string, then no -alternative relief is used when the mouse cursor is over the radiobutton. -The empty string is the default value. -.OP \-selectimage selectImage SelectImage -Specifies an image to display (in place of the \fB\-image\fR option) -when the radiobutton is selected. -This option is ignored unless the \fB\-image\fR option has been -specified. -.OP \-state state State -Specifies one of three states for the radiobutton: \fBnormal\fR, \fBactive\fR, -or \fBdisabled\fR. In normal state the radiobutton is displayed using the -\fB\-foreground\fR and \fB\-background\fR options. The active state is -typically used when the pointer is over the radiobutton. In active state -the radiobutton is displayed using the \fB\-activeforeground\fR and -\fB\-activebackground\fR options. Disabled state means that the radiobutton -should be insensitive: the default bindings will refuse to activate -the widget and will ignore mouse button presses. -In this state the \fB\-disabledforeground\fR and -\fB\-background\fR options determine how the radiobutton is displayed. -.OP \-tristateimage tristateImage TristateImage -Specifies an image to display (in place of the \fB\-image\fR option) -when the radiobutton is selected. -This option is ignored unless the \fB\-image\fR option has been -specified. -.OP \-tristatevalue tristateValue Value -Specifies the value that causes the radiobutton to display the multi-value -selection, also known as the tri-state mode. Defaults to -.QW "" . -.OP \-value value Value -Specifies value to store in the button's associated variable whenever -this button is selected. -.OP \-variable variable Variable -Specifies the name of a global variable to set whenever this button is -selected. Changes in this variable also cause the button to select -or deselect itself. -Defaults to the value \fBselectedButton\fR. -.OP \-width width Width -Specifies a desired width for the button. -If an image or bitmap is being displayed in the button, the value is in -screen units (i.e. any of the forms acceptable to \fBTk_GetPixels\fR); -for text it is in characters. -If this option is not specified, the button's desired width is computed -from the size of the image or bitmap or text being displayed in it. -.BE -.SH DESCRIPTION -.PP -The \fBradiobutton\fR command creates a new window (given by the -\fIpathName\fR argument) and makes it into a radiobutton widget. -Additional -options, described above, may be specified on the command line -or in the option database -to configure aspects of the radiobutton such as its colors, font, -text, and initial relief. The \fBradiobutton\fR command returns its -\fIpathName\fR argument. At the time this command is invoked, -there must not exist a window named \fIpathName\fR, but -\fIpathName\fR's parent must exist. -.PP -A radiobutton is a widget that displays a textual string, bitmap or image -and a diamond or circle called an \fIindicator\fR. -If text is displayed, it must all be in a single font, but it -can occupy multiple lines on the screen (if it contains newlines -or if wrapping occurs because of the \fB\-wraplength\fR option) and -one of the characters may optionally be underlined using the -\fB\-underline\fR option. A radiobutton has -all of the behavior of a simple button: it can display itself in either -of three different ways, according to the \fB\-state\fR option; -it can be made to appear -raised, sunken, or flat; it can be made to flash; and it invokes -a Tcl command whenever mouse button 1 is clicked over the -check button. -.PP -In addition, radiobuttons can be \fIselected\fR. -If a radiobutton is selected, the indicator is normally -drawn with a selected appearance, and -a Tcl variable associated with the radiobutton is set to a particular -value (normally 1). -Under Unix, the indicator is drawn with a sunken relief and a special -color. Under Windows, the indicator is drawn with a round mark inside. -If the radiobutton is not selected, then the indicator is drawn with a -deselected appearance, and the associated variable is -set to a different value (typically 0). -The indicator is drawn without a round mark inside. -Typically, several radiobuttons share a single variable and the -value of the variable indicates which radiobutton is to be selected. -When a radiobutton is selected it sets the value of the variable to -indicate that fact; each radiobutton also monitors the value of -the variable and automatically selects and deselects itself when the -variable's value changes. -If the variable's value matches the \fB\-tristatevalue\fR, then the radiobutton -is drawn using the tri-state mode. This mode is used to indicate mixed or -multiple values. (This is used when the radiobutton represents the state -of multiple items.) -By default the variable \fBselectedButton\fR -is used; its contents give the name of the button that is -selected, or the empty string if no button associated with that -variable is selected. -The name of the variable for a radiobutton, -plus the variable to be stored into it, may be modified with options -on the command line or in the option database. -Configuration options may also be used to modify the way the -indicator is displayed (or whether it is displayed at all). -By default a radiobutton is configured to select itself on button clicks. -.SH "WIDGET COMMAND" -.PP -The \fBradiobutton\fR command creates a new Tcl command whose -name is \fIpathName\fR. This -command may be used to invoke various -operations on the widget. It has the following general form: -.CS -\fIpathName option \fR?\fIarg arg ...\fR? -.CE -\fIOption\fR and the \fIarg\fRs -determine the exact behavior of the command. The following -commands are possible for radiobutton widgets: -.TP -\fIpathName \fBcget\fR \fIoption\fR -. -Returns the current value of the configuration option given -by \fIoption\fR. -\fIOption\fR may have any of the values accepted by the \fBradiobutton\fR -command. -.TP -\fIpathName \fBconfigure\fR ?\fIoption\fR? ?\fIvalue option value ...\fR? -. -Query or modify the configuration options of the widget. -If no \fIoption\fR is specified, returns a list describing all of -the available options for \fIpathName\fR (see \fBTk_ConfigureInfo\fR for -information on the format of this list). If \fIoption\fR is specified -with no \fIvalue\fR, the command returns a list describing the -one named option (this list will be identical to the corresponding -sublist of the value returned if no \fIoption\fR is specified). If -one or more \fIoption\-value\fR pairs are specified, the command -modifies the given widget option(s) to have the given value(s); in -this case the command returns an empty string. -\fIOption\fR may have any of the values accepted by the \fBradiobutton\fR -command. -.TP -\fIpathName \fBdeselect\fR -. -Deselects the radiobutton and sets the associated variable to an -empty string. -If this radiobutton was not currently selected, the command has -no effect. -.TP -\fIpathName \fBflash\fR -. -Flashes the radiobutton. This is accomplished by redisplaying the radiobutton -several times, alternating between active and normal colors. At -the end of the flash the radiobutton is left in the same normal/active -state as when the command was invoked. -This command is ignored if the radiobutton's state is \fBdisabled\fR. -.TP -\fIpathName \fBinvoke\fR -. -Does just what would have happened if the user invoked the radiobutton -with the mouse: selects the button and invokes -its associated Tcl command, if there is one. -The return value is the return value from the Tcl command, or an -empty string if there is no command associated with the radiobutton. -This command is ignored if the radiobutton's state is \fBdisabled\fR. -.TP -\fIpathName \fBselect\fR -. -Selects the radiobutton and sets the associated variable to the -value corresponding to this widget. -.SH BINDINGS -.PP -Tk automatically creates class bindings for radiobuttons that give them -the following default behavior: -.IP [1] -On Unix systems, a radiobutton activates whenever the mouse passes -over it and deactivates whenever the mouse leaves the radiobutton. On -Mac and Windows systems, when mouse button 1 is pressed over a -radiobutton, the button activates whenever the mouse pointer is inside -the button, and deactivates whenever the mouse pointer leaves the -button. -.IP [2] -When mouse button 1 is pressed over a radiobutton it is invoked (it -becomes selected and the command associated with the button is -invoked, if there is one). -.IP [3] -When a radiobutton has the input focus, the space key causes the radiobutton -to be invoked. -.PP -If the radiobutton's state is \fBdisabled\fR then none of the above -actions occur: the radiobutton is completely non-responsive. -.PP -The behavior of radiobuttons can be changed by defining new bindings for -individual widgets or by redefining the class bindings. -.SH "SEE ALSO" -checkbutton(n), labelframe(n), listbox(n), options(n), scale(n), ttk::radiobutton(n) -.SH KEYWORDS -radiobutton, widget -'\" Local Variables: -'\" mode: nroff -'\" End: |