Merged revisions 55225-55227,55229-55269 via svnmerge from

svn+ssh://pythondev@svn.python.org/python/branches/p3yk

................
  r55238 | guido.van.rossum | 2007-05-10 16:46:05 -0700 (Thu, 10 May 2007) | 9 lines

  Merged revisions 55227 via svnmerge from
  svn+ssh://pythondev@svn.python.org/python/trunk

  ........
    r55227 | guido.van.rossum | 2007-05-10 10:20:15 -0700 (Thu, 10 May 2007) | 2 lines

    Fix a bug in test_c_api() that caused a negative refcount.
  ........
................
  r55246 | neal.norwitz | 2007-05-11 00:01:52 -0700 (Fri, 11 May 2007) | 1 line

  Remove commands.getstatus() it is obsolete.
................
  r55248 | neal.norwitz | 2007-05-11 00:29:05 -0700 (Fri, 11 May 2007) | 2 lines

  Remove bsddb185 support.
................
  r55249 | neal.norwitz | 2007-05-11 00:29:50 -0700 (Fri, 11 May 2007) | 1 line

  Remove bsddb185 module too
................
  r55250 | neal.norwitz | 2007-05-11 00:32:13 -0700 (Fri, 11 May 2007) | 1 line

  bsddb185: Gotta remove from the file checked in, not Setup
................
  r55251 | neal.norwitz | 2007-05-11 00:53:26 -0700 (Fri, 11 May 2007) | 1 line

  Remove obsolete IRIX modules (as much as I could find, there is probably more)
................
  r55252 | neal.norwitz | 2007-05-11 00:55:35 -0700 (Fri, 11 May 2007) | 1 line

  Remove SGI turd.
................
  r55254 | georg.brandl | 2007-05-11 03:11:01 -0700 (Fri, 11 May 2007) | 2 lines

  Add a case for set comprehensions to the "cannot assign to" switch.
................
  r55255 | georg.brandl | 2007-05-11 03:11:25 -0700 (Fri, 11 May 2007) | 2 lines

  Fix wrong imports.
................
  r55261 | georg.brandl | 2007-05-11 07:37:48 -0700 (Fri, 11 May 2007) | 2 lines

  Remove removed tex files.
................
  r55262 | georg.brandl | 2007-05-11 08:28:41 -0700 (Fri, 11 May 2007) | 2 lines

  Commit PEP 3132 implementation.
................
  r55264 | georg.brandl | 2007-05-11 08:50:19 -0700 (Fri, 11 May 2007) | 2 lines

  Check in the inevitable AST version number and format Py_ssize_t with %zd.
................
  r55265 | neal.norwitz | 2007-05-11 09:12:22 -0700 (Fri, 11 May 2007) | 1 line

  Remove mention of os.popen* and popen2.* since these will be removed.
................
  r55266 | neal.norwitz | 2007-05-11 09:19:57 -0700 (Fri, 11 May 2007) | 1 line

  Get doc to build again (almost, the doc is fine)
................
  r55267 | neal.norwitz | 2007-05-11 09:21:02 -0700 (Fri, 11 May 2007) | 1 line

  Really get doc to build (remove use of string module)
................
  r55269 | neal.norwitz | 2007-05-11 09:29:43 -0700 (Fri, 11 May 2007) | 1 line

  Add some notes to cleanup later
................

1 files changed, 0 insertions, 224 deletions

diff --git a/Doc/lib/libgl.tex b/Doc/lib/libgl.tex
deleted file mode 100644
index ecf4c36..0000000
--- a/Doc/lib/libgl.tex
+++ /dev/null
@@ -1,224 +0,0 @@
-\section{\module{gl} ---
-         \emph{Graphics Library} interface}
-
-\declaremodule{builtin}{gl}
-  \platform{IRIX}
-\modulesynopsis{Functions from the Silicon Graphics \emph{Graphics Library}.}
-
-
-This module provides access to the Silicon Graphics
-\emph{Graphics Library}.
-It is available only on Silicon Graphics machines.
-
-\warning{Some illegal calls to the GL library cause the Python
-interpreter to dump core.
-In particular, the use of most GL calls is unsafe before the first
-window is opened.}
-
-The module is too large to document here in its entirety, but the
-following should help you to get started.
-The parameter conventions for the C functions are translated to Python as
-follows:
-
-\begin{itemize}
-\item
-All (short, long, unsigned) int values are represented by Python
-integers.
-\item
-All float and double values are represented by Python floating point
-numbers.
-In most cases, Python integers are also allowed.
-\item
-All arrays are represented by one-dimensional Python lists.
-In most cases, tuples are also allowed.
-\item
-\begin{sloppypar}
-All string and character arguments are represented by Python strings,
-for instance,
-\code{winopen('Hi There!')}
-and
-\code{rotate(900, 'z')}.
-\end{sloppypar}
-\item
-All (short, long, unsigned) integer arguments or return values that are
-only used to specify the length of an array argument are omitted.
-For example, the C call
-
-\begin{verbatim}
-lmdef(deftype, index, np, props)
-\end{verbatim}
-
-is translated to Python as
-
-\begin{verbatim}
-lmdef(deftype, index, props)
-\end{verbatim}
-
-\item
-Output arguments are omitted from the argument list; they are
-transmitted as function return values instead.
-If more than one value must be returned, the return value is a tuple.
-If the C function has both a regular return value (that is not omitted
-because of the previous rule) and an output argument, the return value
-comes first in the tuple.
-Examples: the C call
-
-\begin{verbatim}
-getmcolor(i, &red, &green, &blue)
-\end{verbatim}
-
-is translated to Python as
-
-\begin{verbatim}
-red, green, blue = getmcolor(i)
-\end{verbatim}
-
-\end{itemize}
-
-The following functions are non-standard or have special argument
-conventions:
-
-\begin{funcdesc}{varray}{argument}
-%JHXXX the argument-argument added
-Equivalent to but faster than a number of
-\code{v3d()}
-calls.
-The \var{argument} is a list (or tuple) of points.
-Each point must be a tuple of coordinates
-\code{(\var{x}, \var{y}, \var{z})} or \code{(\var{x}, \var{y})}.
-The points may be 2- or 3-dimensional but must all have the
-same dimension.
-Float and int values may be mixed however.
-The points are always converted to 3D double precision points
-by assuming \code{\var{z} = 0.0} if necessary (as indicated in the man page),
-and for each point
-\code{v3d()}
-is called.
-\end{funcdesc}
-
-\begin{funcdesc}{nvarray}{}
-Equivalent to but faster than a number of
-\code{n3f}
-and
-\code{v3f}
-calls.
-The argument is an array (list or tuple) of pairs of normals and points.
-Each pair is a tuple of a point and a normal for that point.
-Each point or normal must be a tuple of coordinates
-\code{(\var{x}, \var{y}, \var{z})}.
-Three coordinates must be given.
-Float and int values may be mixed.
-For each pair,
-\code{n3f()}
-is called for the normal, and then
-\code{v3f()}
-is called for the point.
-\end{funcdesc}
-
-\begin{funcdesc}{vnarray}{}
-Similar to 
-\code{nvarray()}
-but the pairs have the point first and the normal second.
-\end{funcdesc}
-
-\begin{funcdesc}{nurbssurface}{s_k, t_k, ctl, s_ord, t_ord, type}
-% XXX s_k[], t_k[], ctl[][]
-Defines a nurbs surface.
-The dimensions of
-\code{\var{ctl}[][]}
-are computed as follows:
-\code{[len(\var{s_k}) - \var{s_ord}]},
-\code{[len(\var{t_k}) - \var{t_ord}]}.
-\end{funcdesc}
-
-\begin{funcdesc}{nurbscurve}{knots, ctlpoints, order, type}
-Defines a nurbs curve.
-The length of ctlpoints is
-\code{len(\var{knots}) - \var{order}}.
-\end{funcdesc}
-
-\begin{funcdesc}{pwlcurve}{points, type}
-Defines a piecewise-linear curve.
-\var{points}
-is a list of points.
-\var{type}
-must be
-\code{N_ST}.
-\end{funcdesc}
-
-\begin{funcdesc}{pick}{n}
-\funcline{select}{n}
-The only argument to these functions specifies the desired size of the
-pick or select buffer.
-\end{funcdesc}
-
-\begin{funcdesc}{endpick}{}
-\funcline{endselect}{}
-These functions have no arguments.
-They return a list of integers representing the used part of the
-pick/select buffer.
-No method is provided to detect buffer overrun.
-\end{funcdesc}
-
-Here is a tiny but complete example GL program in Python:
-
-\begin{verbatim}
-import gl, GL, time
-
-def main():
-    gl.foreground()
-    gl.prefposition(500, 900, 500, 900)
-    w = gl.winopen('CrissCross')
-    gl.ortho2(0.0, 400.0, 0.0, 400.0)
-    gl.color(GL.WHITE)
-    gl.clear()
-    gl.color(GL.RED)
-    gl.bgnline()
-    gl.v2f(0.0, 0.0)
-    gl.v2f(400.0, 400.0)
-    gl.endline()
-    gl.bgnline()
-    gl.v2f(400.0, 0.0)
-    gl.v2f(0.0, 400.0)
-    gl.endline()
-    time.sleep(5)
-
-main()
-\end{verbatim}
-
-
-\begin{seealso}
-  \seetitle[http://pyopengl.sourceforge.net/]
-           {PyOpenGL: The Python OpenGL Binding}
-           {An interface to OpenGL\index{OpenGL} is also available;
-            see information about the
-            \strong{PyOpenGL}\index{PyOpenGL} project online at
-            \url{http://pyopengl.sourceforge.net/}.  This may be a
-            better option if support for SGI hardware from before
-            about 1996 is not required.}
-\end{seealso}
-
-
-\section{\module{DEVICE} ---
-         Constants used with the \module{gl} module}
-
-\declaremodule{standard}{DEVICE}
-  \platform{IRIX}
-\modulesynopsis{Constants used with the \module{gl} module.}
-
-This modules defines the constants used by the Silicon Graphics
-\emph{Graphics Library} that C programmers find in the header file
-\code{<gl/device.h>}.
-Read the module source file for details.
-
-
-\section{\module{GL} ---
-         Constants used with the \module{gl} module}
-
-\declaremodule[gl-constants]{standard}{GL}
-  \platform{IRIX}
-\modulesynopsis{Constants used with the \module{gl} module.}
-
-This module contains constants used by the Silicon Graphics
-\emph{Graphics Library} from the C header file \code{<gl/gl.h>}.
-Read the module source file for details.