Remove pre module

2 files changed, 0 insertions, 665 deletions

diff --git a/Lib/pre.py b/Lib/pre.py
deleted file mode 100644
index 60db913..0000000
--- a/Lib/pre.py
+++ /dev/null
@@ -1,662 +0,0 @@
-# module 're' -- A collection of regular expression operations
-
-r"""Support for regular expressions (RE).
-
-This module provides regular expression matching operations similar to
-those found in Perl. It's 8-bit clean: the strings being processed may
-contain both null bytes and characters whose high bit is set. Regular
-expression pattern strings may not contain null bytes, but can specify
-the null byte using the \\number notation. Characters with the high
-bit set may be included.
-
-Regular expressions can contain both special and ordinary
-characters. Most ordinary characters, like "A", "a", or "0", are the
-simplest regular expressions; they simply match themselves. You can
-concatenate ordinary characters, so last matches the string 'last'.
-
-The special characters are:
-    "."      Matches any character except a newline.
-    "^"      Matches the start of the string.
-    "$"      Matches the end of the string.
-    "*"      Matches 0 or more (greedy) repetitions of the preceding RE.
-             Greedy means that it will match as many repetitions as possible.
-    "+"      Matches 1 or more (greedy) repetitions of the preceding RE.
-    "?"      Matches 0 or 1 (greedy) of the preceding RE.
-    *?,+?,?? Non-greedy versions of the previous three special characters.
-    {m,n}    Matches from m to n repetitions of the preceding RE.
-    {m,n}?   Non-greedy version of the above.
-    "\\"      Either escapes special characters or signals a special sequence.
-    []       Indicates a set of characters.
-             A "^" as the first character indicates a complementing set.
-    "|"      A|B, creates an RE that will match either A or B.
-    (...)    Matches the RE inside the parentheses.
-             The contents can be retrieved or matched later in the string.
-    (?iLmsx) Set the I, L, M, S, or X flag for the RE.
-    (?:...)  Non-grouping version of regular parentheses.
-    (?P<name>...) The substring matched by the group is accessible by name.
-    (?P=name)     Matches the text matched earlier by the group named name.
-    (?#...)  A comment; ignored.
-    (?=...)  Matches if ... matches next, but doesn't consume the string.
-    (?!...)  Matches if ... doesn't match next.
-
-The special sequences consist of "\\" and a character from the list
-below. If the ordinary character is not on the list, then the
-resulting RE will match the second character.
-    \\number  Matches the contents of the group of the same number.
-    \\A       Matches only at the start of the string.
-    \\Z       Matches only at the end of the string.
-    \\b       Matches the empty string, but only at the start or end of a word.
-    \\B       Matches the empty string, but not at the start or end of a word.
-    \\d       Matches any decimal digit; equivalent to the set [0-9].
-    \\D       Matches any non-digit character; equivalent to the set [^0-9].
-    \\s       Matches any whitespace character; equivalent to [ \\t\\n\\r\\f\\v].
-    \\S       Matches any non-whitespace character; equiv. to [^ \\t\\n\\r\\f\\v].
-    \\w       Matches any alphanumeric character; equivalent to [a-zA-Z0-9_].
-             With LOCALE, it will match the set [0-9_] plus characters defined
-             as letters for the current locale.
-    \\W       Matches the complement of \\w.
-    \\\\       Matches a literal backslash.
-
-This module exports the following functions:
-    match    Match a regular expression pattern to the beginning of a string.
-    search   Search a string for the presence of a pattern.
-    sub      Substitute occurrences of a pattern found in a string.
-    subn     Same as sub, but also return the number of substitutions made.
-    split    Split a string by the occurrences of a pattern.
-    findall  Find all occurrences of a pattern in a string.
-    compile  Compile a pattern into a RegexObject.
-    escape   Backslash all non-alphanumerics in a string.
-
-This module exports the following classes:
-    RegexObject    Holds a compiled regular expression pattern.
-    MatchObject    Contains information about pattern matches.
-
-Some of the functions in this module takes flags as optional parameters:
-    I  IGNORECASE  Perform case-insensitive matching.
-    L  LOCALE      Make \w, \W, \b, \B, dependent on the current locale.
-    M  MULTILINE   "^" matches the beginning of lines as well as the string.
-                   "$" matches the end of lines as well as the string.
-    S  DOTALL      "." matches any character at all, including the newline.
-    X  VERBOSE     Ignore whitespace and comments for nicer looking RE's.
-
-This module also defines an exception 'error'.
-
-"""
-
-
-import sys
-from pcre import *
-
-# XXX This module is deprecated as of Python 2.3, and should be removed
-# in the version that follows 2.3.
-import warnings as _warnings
-_warnings.warn("Please use the 're' module, not the 'pre' module",
-               DeprecationWarning)
-
-__all__ = ["match","search","sub","subn","split","findall","escape","compile",
-           "I","L","M","S","X","IGNORECASE","LOCALE","MULTILINE","DOTALL",
-           "VERBOSE","error"]
-
-#
-# First, the public part of the interface:
-#
-
-# pcre.error and re.error should be the same, since exceptions can be
-# raised from either module.
-
-# compilation flags
-
-I = IGNORECASE
-L = LOCALE
-M = MULTILINE
-S = DOTALL
-X = VERBOSE
-
-
-#
-#
-#
-
-_cache = {}
-_MAXCACHE = 20
-
-def _cachecompile(pattern, flags=0):
-    key = (pattern, flags)
-    try:
-        return _cache[key]
-    except KeyError:
-        pass
-    value = compile(pattern, flags)
-    if len(_cache) >= _MAXCACHE:
-        _cache.clear()
-    _cache[key] = value
-    return value
-
-def match(pattern, string, flags=0):
-    """match (pattern, string[, flags]) -> MatchObject or None
-
-    If zero or more characters at the beginning of string match the
-    regular expression pattern, return a corresponding MatchObject
-    instance. Return None if the string does not match the pattern;
-    note that this is different from a zero-length match.
-
-    Note: If you want to locate a match anywhere in string, use
-    search() instead.
-
-    """
-
-    return _cachecompile(pattern, flags).match(string)
-
-def search(pattern, string, flags=0):
-    """search (pattern, string[, flags]) -> MatchObject or None
-
-    Scan through string looking for a location where the regular
-    expression pattern produces a match, and return a corresponding
-    MatchObject instance. Return None if no position in the string
-    matches the pattern; note that this is different from finding a
-    zero-length match at some point in the string.
-
-    """
-    return _cachecompile(pattern, flags).search(string)
-
-def sub(pattern, repl, string, count=0):
-    """sub(pattern, repl, string[, count=0]) -> string
-
-    Return the string obtained by replacing the leftmost
-    non-overlapping occurrences of pattern in string by the
-    replacement repl. If the pattern isn't found, string is returned
-    unchanged. repl can be a string or a function; if a function, it
-    is called for every non-overlapping occurrence of pattern. The
-    function takes a single match object argument, and returns the
-    replacement string.
-
-    The pattern may be a string or a regex object; if you need to
-    specify regular expression flags, you must use a regex object, or
-    use embedded modifiers in a pattern; e.g.
-    sub("(?i)b+", "x", "bbbb BBBB") returns 'x x'.
-
-    The optional argument count is the maximum number of pattern
-    occurrences to be replaced; count must be a non-negative integer,
-    and the default value of 0 means to replace all occurrences.
-
-    """
-    if type(pattern) == type(''):
-        pattern = _cachecompile(pattern)
-    return pattern.sub(repl, string, count)
-
-def subn(pattern, repl, string, count=0):
-    """subn(pattern, repl, string[, count=0]) -> (string, num substitutions)
-
-    Perform the same operation as sub(), but return a tuple
-    (new_string, number_of_subs_made).
-
-    """
-    if type(pattern) == type(''):
-        pattern = _cachecompile(pattern)
-    return pattern.subn(repl, string, count)
-
-def split(pattern, string, maxsplit=0):
-    """split(pattern, string[, maxsplit=0]) -> list of strings
-
-    Split string by the occurrences of pattern. If capturing
-    parentheses are used in pattern, then the text of all groups in
-    the pattern are also returned as part of the resulting list. If
-    maxsplit is nonzero, at most maxsplit splits occur, and the
-    remainder of the string is returned as the final element of the
-    list.
-
-    """
-    if type(pattern) == type(''):
-        pattern = _cachecompile(pattern)
-    return pattern.split(string, maxsplit)
-
-def findall(pattern, string):
-    """findall(pattern, string) -> list
-
-    Return a list of all non-overlapping matches of pattern in
-    string. If one or more groups are present in the pattern, return a
-    list of groups; this will be a list of tuples if the pattern has
-    more than one group. Empty matches are included in the result.
-
-    """
-    if type(pattern) == type(''):
-        pattern = _cachecompile(pattern)
-    return pattern.findall(string)
-
-def escape(pattern):
-    """escape(string) -> string
-
-    Return string with all non-alphanumerics backslashed; this is
-    useful if you want to match an arbitrary literal string that may
-    have regular expression metacharacters in it.
-
-    """
-    result = list(pattern)
-    for i in range(len(pattern)):
-        char = pattern[i]
-        if not char.isalnum():
-            if char=='\000': result[i] = '\\000'
-            else: result[i] = '\\'+char
-    return ''.join(result)
-
-def compile(pattern, flags=0):
-    """compile(pattern[, flags]) -> RegexObject
-
-    Compile a regular expression pattern into a regular expression
-    object, which can be used for matching using its match() and
-    search() methods.
-
-    """
-    groupindex={}
-    code=pcre_compile(pattern, flags, groupindex)
-    return RegexObject(pattern, flags, code, groupindex)
-
-
-#
-#   Class definitions
-#
-
-class RegexObject:
-    """Holds a compiled regular expression pattern.
-
-    Methods:
-    match    Match the pattern to the beginning of a string.
-    search   Search a string for the presence of the pattern.
-    sub      Substitute occurrences of the pattern found in a string.
-    subn     Same as sub, but also return the number of substitutions made.
-    split    Split a string by the occurrences of the pattern.
-    findall  Find all occurrences of the pattern in a string.
-
-    """
-
-    def __init__(self, pattern, flags, code, groupindex):
-        self.code = code
-        self.flags = flags
-        self.pattern = pattern
-        self.groupindex = groupindex
-
-    def search(self, string, pos=0, endpos=None):
-        """search(string[, pos][, endpos]) -> MatchObject or None
-
-        Scan through string looking for a location where this regular
-        expression produces a match, and return a corresponding
-        MatchObject instance. Return None if no position in the string
-        matches the pattern; note that this is different from finding
-        a zero-length match at some point in the string. The optional
-        pos and endpos parameters have the same meaning as for the
-        match() method.
-
-        """
-        if endpos is None or endpos>len(string):
-            endpos=len(string)
-        if endpos<pos: endpos=pos
-        regs = self.code.match(string, pos, endpos, 0)
-        if regs is None:
-            return None
-        self._num_regs=len(regs)
-
-        return MatchObject(self,
-                           string,
-                           pos, endpos,
-                           regs)
-
-    def match(self, string, pos=0, endpos=None):
-        """match(string[, pos][, endpos]) -> MatchObject or None
-
-        If zero or more characters at the beginning of string match
-        this regular expression, return a corresponding MatchObject
-        instance. Return None if the string does not match the
-        pattern; note that this is different from a zero-length match.
-
-        Note: If you want to locate a match anywhere in string, use
-        search() instead.
-
-        The optional second parameter pos gives an index in the string
-        where the search is to start; it defaults to 0.  This is not
-        completely equivalent to slicing the string; the '' pattern
-        character matches at the real beginning of the string and at
-        positions just after a newline, but not necessarily at the
-        index where the search is to start.
-
-        The optional parameter endpos limits how far the string will
-        be searched; it will be as if the string is endpos characters
-        long, so only the characters from pos to endpos will be
-        searched for a match.
-
-        """
-        if endpos is None or endpos>len(string):
-            endpos=len(string)
-        if endpos<pos: endpos=pos
-        regs = self.code.match(string, pos, endpos, ANCHORED)
-        if regs is None:
-            return None
-        self._num_regs=len(regs)
-        return MatchObject(self,
-                           string,
-                           pos, endpos,
-                           regs)
-
-    def sub(self, repl, string, count=0):
-        """sub(repl, string[, count=0]) -> string
-
-        Return the string obtained by replacing the leftmost
-        non-overlapping occurrences of the compiled pattern in string
-        by the replacement repl. If the pattern isn't found, string is
-        returned unchanged.
-
-        Identical to the sub() function, using the compiled pattern.
-
-        """
-        return self.subn(repl, string, count)[0]
-
-    def subn(self, repl, source, count=0):
-        """subn(repl, string[, count=0]) -> tuple
-
-        Perform the same operation as sub(), but return a tuple
-        (new_string, number_of_subs_made).
-
-        """
-        if count < 0:
-            raise error, "negative substitution count"
-        if count == 0:
-            count = sys.maxint
-        n = 0           # Number of matches
-        pos = 0         # Where to start searching
-        lastmatch = -1  # End of last match
-        results = []    # Substrings making up the result
-        end = len(source)
-
-        if type(repl) is type(''):
-            # See if repl contains group references (if it does,
-            # pcre_expand will attempt to call _Dummy.group, which
-            # results in a TypeError)
-            try:
-                repl = pcre_expand(_Dummy, repl)
-            except (error, TypeError):
-                m = MatchObject(self, source, 0, end, [])
-                repl = lambda m, repl=repl, expand=pcre_expand: expand(m, repl)
-            else:
-                m = None
-        else:
-            m = MatchObject(self, source, 0, end, [])
-
-        match = self.code.match
-        append = results.append
-        while n < count and pos <= end:
-            regs = match(source, pos, end, 0)
-            if not regs:
-                break
-            self._num_regs = len(regs)
-            i, j = regs[0]
-            if i == j == lastmatch:
-                # Empty match adjacent to previous match
-                pos = pos + 1
-                append(source[lastmatch:pos])
-                continue
-            if pos < i:
-                append(source[pos:i])
-            if m:
-                m.pos = pos
-                m.regs = regs
-                append(repl(m))
-            else:
-                append(repl)
-            pos = lastmatch = j
-            if i == j:
-                # Last match was empty; don't try here again
-                pos = pos + 1
-                append(source[lastmatch:pos])
-            n = n + 1
-        append(source[pos:])
-        return (''.join(results), n)
-
-    def split(self, source, maxsplit=0):
-        """split(source[, maxsplit=0]) -> list of strings
-
-        Split string by the occurrences of the compiled pattern. If
-        capturing parentheses are used in the pattern, then the text
-        of all groups in the pattern are also returned as part of the
-        resulting list. If maxsplit is nonzero, at most maxsplit
-        splits occur, and the remainder of the string is returned as
-        the final element of the list.
-
-        """
-        if maxsplit < 0:
-            raise error, "negative split count"
-        if maxsplit == 0:
-            maxsplit = sys.maxint
-        n = 0
-        pos = 0
-        lastmatch = 0
-        results = []
-        end = len(source)
-        match = self.code.match
-        append = results.append
-        while n < maxsplit:
-            regs = match(source, pos, end, 0)
-            if not regs:
-                break
-            i, j = regs[0]
-            if i == j:
-                # Empty match
-                if pos >= end:
-                    break
-                pos = pos+1
-                continue
-            append(source[lastmatch:i])
-            rest = regs[1:]
-            if rest:
-                for a, b in rest:
-                    if a == -1 or b == -1:
-                        group = None
-                    else:
-                        group = source[a:b]
-                    append(group)
-            pos = lastmatch = j
-            n = n + 1
-        append(source[lastmatch:])
-        return results
-
-    def findall(self, source):
-        """findall(source) -> list
-
-        Return a list of all non-overlapping matches of the compiled
-        pattern in string. If one or more groups are present in the
-        pattern, return a list of groups; this will be a list of
-        tuples if the pattern has more than one group. Empty matches
-        are included in the result.
-
-        """
-        pos = 0
-        end = len(source)
-        results = []
-        match = self.code.match
-        append = results.append
-        while pos <= end:
-            regs = match(source, pos, end, 0)
-            if not regs:
-                break
-            i, j = regs[0]
-            rest = regs[1:]
-            if not rest:
-                gr = source[i:j]
-            elif len(rest) == 1:
-                a, b = rest[0]
-                gr = source[a:b]
-            else:
-                gr = []
-                for (a, b) in rest:
-                    gr.append(source[a:b])
-                gr = tuple(gr)
-            append(gr)
-            pos = max(j, pos+1)
-        return results
-
-    # The following 3 functions were contributed by Mike Fletcher, and
-    # allow pickling and unpickling of RegexObject instances.
-    def __getinitargs__(self):
-        return (None,None,None,None) # any 4 elements, to work around
-                                     # problems with the
-                                     # pickle/cPickle modules not yet
-                                     # ignoring the __init__ function
-    def __getstate__(self):
-        return self.pattern, self.flags, self.groupindex
-    def __setstate__(self, statetuple):
-        self.pattern = statetuple[0]
-        self.flags = statetuple[1]
-        self.groupindex = statetuple[2]
-        self.code = pcre_compile(*statetuple)
-
-class _Dummy:
-    # Dummy class used by _subn_string().  Has 'group' to avoid core dump.
-    group = None
-
-class MatchObject:
-    """Holds a compiled regular expression pattern.
-
-    Methods:
-    start      Return the index of the start of a matched substring.
-    end        Return the index of the end of a matched substring.
-    span       Return a tuple of (start, end) of a matched substring.
-    groups     Return a tuple of all the subgroups of the match.
-    group      Return one or more subgroups of the match.
-    groupdict  Return a dictionary of all the named subgroups of the match.
-
-    """
-
-    def __init__(self, re, string, pos, endpos, regs):
-        self.re = re
-        self.string = string
-        self.pos = pos
-        self.endpos = endpos
-        self.regs = regs
-
-    def start(self, g = 0):
-        """start([group=0]) -> int or None
-
-        Return the index of the start of the substring matched by
-        group; group defaults to zero (meaning the whole matched
-        substring). Return -1 if group exists but did not contribute
-        to the match.
-
-        """
-        if type(g) == type(''):
-            try:
-                g = self.re.groupindex[g]
-            except (KeyError, TypeError):
-                raise IndexError, 'group %r is undefined' % (g,)
-        return self.regs[g][0]
-
-    def end(self, g = 0):
-        """end([group=0]) -> int or None
-
-        Return the indices of the end of the substring matched by
-        group; group defaults to zero (meaning the whole matched
-        substring). Return -1 if group exists but did not contribute
-        to the match.
-
-        """
-        if type(g) == type(''):
-            try:
-                g = self.re.groupindex[g]
-            except (KeyError, TypeError):
-                raise IndexError, 'group %r is undefined' % (g,)
-        return self.regs[g][1]
-
-    def span(self, g = 0):
-        """span([group=0]) -> tuple
-
-        Return the 2-tuple (m.start(group), m.end(group)). Note that
-        if group did not contribute to the match, this is (-1,
-        -1). Group defaults to zero (meaning the whole matched
-        substring).
-
-        """
-        if type(g) == type(''):
-            try:
-                g = self.re.groupindex[g]
-            except (KeyError, TypeError):
-                raise IndexError, 'group %r is undefined' % (g,)
-        return self.regs[g]
-
-    def groups(self, default=None):
-        """groups([default=None]) -> tuple
-
-        Return a tuple containing all the subgroups of the match, from
-        1 up to however many groups are in the pattern. The default
-        argument is used for groups that did not participate in the
-        match.
-
-        """
-        result = []
-        for g in range(1, self.re._num_regs):
-            a, b = self.regs[g]
-            if a == -1 or b == -1:
-                result.append(default)
-            else:
-                result.append(self.string[a:b])
-        return tuple(result)
-
-    def group(self, *groups):
-        """group([group1, group2, ...]) -> string or tuple
-
-        Return one or more subgroups of the match. If there is a
-        single argument, the result is a single string; if there are
-        multiple arguments, the result is a tuple with one item per
-        argument. Without arguments, group1 defaults to zero (i.e. the
-        whole match is returned). If a groupN argument is zero, the
-        corresponding return value is the entire matching string; if
-        it is in the inclusive range [1..99], it is the string
-        matching the corresponding parenthesized group. If a group
-        number is negative or larger than the number of groups defined
-        in the pattern, an IndexError exception is raised. If a group
-        is contained in a part of the pattern that did not match, the
-        corresponding result is None. If a group is contained in a
-        part of the pattern that matched multiple times, the last
-        match is returned.
-
-        If the regular expression uses the (?P<name>...) syntax, the
-        groupN arguments may also be strings identifying groups by
-        their group name. If a string argument is not used as a group
-        name in the pattern, an IndexError exception is raised.
-
-        """
-        if len(groups) == 0:
-            groups = (0,)
-        result = []
-        for g in groups:
-            if type(g) == type(''):
-                try:
-                    g = self.re.groupindex[g]
-                except (KeyError, TypeError):
-                    raise IndexError, 'group %r is undefined' % (g,)
-            if g >= len(self.regs):
-                raise IndexError, 'group %r is undefined' % (g,)
-            a, b = self.regs[g]
-            if a == -1 or b == -1:
-                result.append(None)
-            else:
-                result.append(self.string[a:b])
-        if len(result) > 1:
-            return tuple(result)
-        elif len(result) == 1:
-            return result[0]
-        else:
-            return ()
-
-    def groupdict(self, default=None):
-        """groupdict([default=None]) -> dictionary
-
-        Return a dictionary containing all the named subgroups of the
-        match, keyed by the subgroup name. The default argument is
-        used for groups that did not participate in the match.
-
-        """
-        dict = {}
-        for name, index in self.re.groupindex.items():
-            a, b = self.regs[index]
-            if a == -1 or b == -1:
-                dict[name] = default
-            else:
-                dict[name] = self.string[a:b]
-        return dict
diff --git a/Lib/test/test_sundry.py b/Lib/test/test_sundry.py
index 07f4f8b..5112183 100644
--- a/Lib/test/test_sundry.py
+++ b/Lib/test/test_sundry.py
@@ -5,8 +5,6 @@ warnings.filterwarnings('ignore', r".*posixfile module",
                         DeprecationWarning, 'posixfile$')
 warnings.filterwarnings('ignore', r".*statcache module",
                         DeprecationWarning, 'statcache$')
-warnings.filterwarnings('ignore', r".*'re' module",
-                        DeprecationWarning, 'pre$')
 
 from test.test_support import verbose
 
@@ -64,7 +62,6 @@ import pdb
 import pipes
 #import poplib
 import posixfile
-import pre
 import profile
 import pstats
 import py_compile