summaryrefslogtreecommitdiffstats
path: root/Mac/Lib
diff options
context:
space:
mode:
authorJack Jansen <jack.jansen@cwi.nl>1996-09-05 15:17:01 (GMT)
committerJack Jansen <jack.jansen@cwi.nl>1996-09-05 15:17:01 (GMT)
commit4a5be817daac72985e8ea6c1256fd4688e5efacb (patch)
treec84d361a1a60a98d85a686c78b2bb030410c94ea /Mac/Lib
parent22fa64249c67c4580b0ad994475b6e33ae4bb705 (diff)
downloadcpython-4a5be817daac72985e8ea6c1256fd4688e5efacb.zip
cpython-4a5be817daac72985e8ea6c1256fd4688e5efacb.tar.gz
cpython-4a5be817daac72985e8ea6c1256fd4688e5efacb.tar.bz2
Symbolic names for all error codes from Errors.h and errno.h
Diffstat (limited to 'Mac/Lib')
-rw-r--r--Mac/Lib/macerrors.py626
1 files changed, 626 insertions, 0 deletions
diff --git a/Mac/Lib/macerrors.py b/Mac/Lib/macerrors.py
new file mode 100644
index 0000000..8020d26
--- /dev/null
+++ b/Mac/Lib/macerrors.py
@@ -0,0 +1,626 @@
+svTempDisable = -32768 #Temporarily disable card but run primary init.
+svDisabled = -32640 #Reserve range -32640 to -32768 for Apple temp disables.
+fontNotOutlineErr = -32615 #bitmap font passed to routine that does outlines only
+invalidIndexErr = -20002 #The recordIndex parameter is not valid.
+recordDataTooBigErr = -20001 #The record data is bigger than buffer size (1024 bytes).
+unknownInsertModeErr = -20000 #There is no such an insert mode.
+pmRecvEndErr = -13005 #during receive, pmgr did not finish hs configured for this connection
+pmRecvStartErr = -13004 #during receive, pmgr did not start hs
+pmSendEndErr = -13003 #during send, pmgr did not finish hs
+pmSendStartErr = -13002 #during send, pmgr did not start hs
+pmReplyTOErr = -13001 #Timed out waiting for reply
+pmBusyErr = -13000 #Power Mgr never ready to start handshake
+pictureDataErr = -11005 #the picture data was invalid
+colorsRequestedErr = -11004 #the number of colors requested was illegal
+cantLoadPickMethodErr = -11003 #unable to load the custom pick proc
+pictInfoVerbErr = -11002 #the passed verb was invalid
+pictInfoIDErr = -11001 #the internal consistancy check for the PictInfoID is wrong
+pictInfoVersionErr = -11000 #wrong version of the PictInfo structure
+telNotEnoughdspBW = -10116 #not enough real-time for allocation
+telBadSampleRate = -10115 #incompatible sample rate
+telBadSWErr = -10114 #Software not installed properly
+telDetAlreadyOn = -10113 #detection is already turned on
+telAutoAnsNotOn = -10112 #autoAnswer in not turned on
+telValidateFailed = -10111 #telValidate failed
+telBadProcID = -10110 #invalid procID
+telDeviceNotFound = -10109 #device not found
+telBadCodeResource = -10108 #code resource not found
+telInitFailed = -10107 #initialization failed
+telNoCommFolder = -10106 #Communications/Extensions Ÿ not found
+telUnknownErr = -10103 #unable to set config
+telNoSuchTool = -10102 #unable to find tool with name specified
+telBadFunction = -10091 #bad msgCode specified
+telPBErr = -10090 #parameter block error, bad format
+telCANotDeflectable = -10082 #CA not "deflectable"
+telCANotRejectable = -10081 #CA not "rejectable"
+telCANotAcceptable = -10080 #CA not "acceptable"
+telTermNotOpen = -10072 #terminal not opened via TELOpenTerm
+telStillNeeded = -10071 #terminal driver still needed by someone else
+telAlreadyOpen = -10070 #terminal already open
+telNoCallbackRef = -10064 #no call back reference was specified, but is required
+telDisplayModeNotSupp = -10063 #display mode not supported by tool
+telBadDisplayMode = -10062 #bad display mode specified
+telFwdTypeNotSupp = -10061 #forward type not supported by tool
+telDNTypeNotSupp = -10060 #DN type not supported by tool
+telBadRate = -10059 #bad rate specified
+telBadBearerType = -10058 #bad bearerType specified
+telBadSelect = -10057 #unable to select or deselect DN
+telBadParkID = -10056 #bad park id specified
+telBadPickupGroupID = -10055 #bad pickup group ID specified
+telBadFwdType = -10054 #bad fwdType specified
+telBadFeatureID = -10053 #bad feature ID specified
+telBadIntercomID = -10052 #bad intercom ID specified
+telBadPageID = -10051 #bad page ID specified
+telBadDNType = -10050 #DN type invalid
+telConfLimitExceeded = -10047 #attempt to exceed switch conference limits
+telCBErr = -10046 #call back feature not set previously
+telTransferRej = -10045 #transfer request rejected
+telTransferErr = -10044 #transfer not prepared
+telConfRej = -10043 #conference request was rejected
+telConfErr = -10042 #conference was not prepared
+telConfNoLimit = -10041 #no limit was specified but required
+telConfLimitErr = -10040 #limit specified is too high for this configuration
+telFeatNotSupp = -10033 #feature program call not supported by this tool
+telFeatActive = -10032 #feature already active
+telFeatNotAvail = -10031 #feature subscribed but not available
+telFeatNotSub = -10030 #feature not subscribed
+telDNDTypeNotSupp = -10024 #DND type is not supported by this tool
+telBadDNDType = -10023 #bad DND type specified
+telIntExtNotSupp = -10022 #internal external type not supported by this tool
+telBadIntExt = -10021 #bad internal external error
+telStateNotSupp = -10020 #device state not supported by tool
+telBadStateErr = -10019 #bad device state specified
+telIndexNotSupp = -10018 #index not supported by this tool
+telBadIndex = -10017 #bad index specified
+telAPattNotSupp = -10016 #alerting pattern not supported by tool
+telBadAPattErr = -10015 #bad alerting pattern specified
+telVTypeNotSupp = -10014 #volume type not supported by this tool
+telBadVTypeErr = -10013 #bad volume type error
+telBadLevelErr = -10012 #bad volume level setting
+telHTypeNotSupp = -10011 #hook type not supported by this tool
+telBadHTypeErr = -10010 #bad hook type specified
+telNoOpenErr = -10008 #unable to open terminal
+telNoMemErr = -10007 #no memory to allocate handle
+telCAUnavail = -10006 #a CA is not available
+telBadProcErr = -10005 #bad msgProc specified
+telBadHandErr = -10004 #bad handle specified
+telBadCAErr = -10003 #TELCAHandle not found or invalid
+telBadDNErr = -10002 #TELDNHandle not found or invalid
+telBadTermErr = -10001 #invalid TELHandle or handle not found
+kDMMainDisplayCannotMoveErr = -6231 #Trying to move main display (or a display mirrored to it)
+kDMDisplayAlreadyInstalledErr = -6230 #Attempt to add an already installed display.
+kDMDisplayNotFoundErr = -6229 #Could not find item (will someday remove).
+kDMDriverNotDisplayMgrAwareErr = -6228 #Video Driver does not support display manager.
+kDMSWNotInitializedErr = -6227 #Required software not initialized (eg windowmanager or display mgr).
+kSysSWTooOld = -6226 #Missing critical pieces of System Software.
+kDMMirroringNotOn = -6225 #Returned by all calls that need mirroring to be on to do their thing.
+kDMCantBlock = -6224 #Mirroring is already on, canıt Block now (call DMUnMirror() first).
+kDMMirroringBlocked = -6223 #DMBlockMirroring() has been called.
+kDMWrongNumberOfDisplays = -6222 #Can only handle 2 displays for now.
+kDMMirroringOnAlready = -6221 #Returned by all calls that need mirroring to be off to do their thing.
+kDMGenErr = -6220 #Unexpected Error
+gestaltLocationErr = -5553 #gestalt function ptr wasn't in sysheap
+gestaltDupSelectorErr = -5552 #tried to add an entry that already existed
+gestaltUndefSelectorErr = -5551 #undefined selector was passed to Gestalt
+gestaltUnknownErr = -5550 #value returned if Gestalt doesn't know the answer
+envVersTooBig = -5502 #Version bigger than call can handle
+envBadVers = -5501 #Version non-positive
+envNotPresent = -5500 #returned by glue.
+afpInsideTrashErr = -5044 #the folder being shared is inside the trash folder OR the shared folder is being moved into the trash folder OR the folder is being moved to the trash and it contains a shared folder
+afpInsideSharedErr = -5043 #the folder being shared is inside a shared folder OR the folder contains a shared folder and is being moved into a shared folder OR the folder contains a shared folder and is being moved into the descendent of a shared folder.
+afpPwdExpiredErr = -5042 #the password being used is too old: this requires the user to change the password before log-in can continue
+afpPwdTooShortErr = -5041 #the password being set is too short: there is a minimum length that must be met or exceeded
+afpPwdSameErr = -5040 #someone tried to change their password to the same password on a mantadory password change
+afpContainsSharedErr = -5033 #the folder being shared contains a shared folder
+afpObjectLocked = -5032 #Object is M/R/D/W inhibited
+afpVolLocked = -5031 #Volume is Read-Only
+couldNotParseSourceFileErr = -3026 #Source document does not contain source type
+invalidTranslationPathErr = -3025 #Source type to destination type not a valid path
+fragLastErrCode = -2899 #last reserved error code number
+fragInvalidFragmentUsage = -2824 #an application fragment or accellerated resource has no entry point or termination routine
+fragArchError = -2823 #fragment targeted for an unacceptable architecture
+fragAppNotFound = -2822 #no application found in cfrg (for Process Manager)
+fragUserInitProcErr = -2821 #user intialization routine did not return noErr
+fragCorruptErr = -2820 #fragment container corrupted (known format)
+fragConstErr = -2819 #internal inconstistancy
+fragMgrInitErr = -2818 #error in initailization of this manager
+fragLibConnErr = -2817 #error connecting to library (error occured in sub prepare)
+fragInitRtnUsageErr = -2816 #boot library has initialization routine
+fragInitLoop = -2815 #circularity detected in mandatory initialization order
+fragImportTooNew = -2814 #import library was too new and therefore incompatible
+fragImportTooOld = -2813 #import library was too old and therefore incompatible
+fragObjectInitSeqErr = -2812 #order error during user initialization function invocation
+fragNoContextIDs = -2811 #no more context idıs
+fragNoAddrSpace = -2810 #out of memory in user's address space for loadable section
+fragNoMem = -2809 #out of memory for interal bookkeeping
+fragUnused1 = -2808 #unused
+fragHadUnresolveds = -2807 #loaded fragment had "hard" unresolved imports
+fragFormatUnknown = -2806 #fragment container format unknown
+fragDupRegLibName = -2805 #registered name already in use
+fragLibNotFound = -2804 #library name not found in Frag registry
+fragSectionNotFound = -2803 #section was not found
+fragSymbolNotFound = -2802 #symbol was not found in connection
+fragConnectionIDNotFound = -2801 #connecionID was not valid
+fragContextNotFound = -2800 #contextID was not valid
+nrPathBufferTooSmall = -2551 #buffer for path is too small
+nrPathNotFound = -2550 #a path component lookup failed
+tsmUnknownErr = -2519 #any other errors
+tsmUnsupportedTypeErr = -2518 #unSupported interface type error
+tsmScriptHasNoIMErr = -2517 #script has no imput method or is using old IM
+tsmInputMethodIsOldErr = -2516 #returned by GetDefaultInputMethod
+tsmComponentAlreadyOpenErr = -2515 #text service already opened for the document
+tsmTSNotOpenErr = -2514 #text service is not open
+tsmTSHasNoMenuErr = -2513 #the text service has no menu
+tsmUseInputWindowErr = -2512 #not TSM aware because we are using input window
+tsmDocumentOpenErr = -2511 #there are open documents
+tsmTextServiceNotFoundErr = -2510 #no text service found
+tsmCantOpenComponentErr = -2509 #canıt open the component
+tsmNoOpenTSErr = -2508 #no open text service
+tsmDocNotActiveErr = -2507 #document is NOT active
+tsmTSMDocBusyErr = -2506 #document is still active
+tsmInvalidDocIDErr = -2505 #invalid TSM documentation id
+tsmNeverRegisteredErr = -2504 #app never registered error (not TSM aware)
+tsmAlreadyRegisteredErr = -2503 #want to register again error
+tsmNotAnAppErr = -2502 #not an application error
+badCallOrderErr = -2209 #Usually due to a status call being called prior to being setup first
+noDMAErr = -2208 #Canıt do DMA digitizing (i.e. can't go to requested dest
+badDepthErr = -2207 #Canıt digitize into this depth
+notExactSizeErr = -2206 #Canıt do exact size requested
+noMoreKeyColorsErr = -2205 #all key indexes in use
+notExactMatrixErr = -2204 #warning of bad matrix, digitizer did its best
+matrixErr = -2203 #bad matrix, digitizer did nothing
+qtParamErr = -2202 #bad input parameter (out of range, etc)
+digiUnimpErr = -2201 #feature unimplemented
+soundSupportNotAvailableErr = -2056 #QT for Windows error
+noSoundTrackInMovieErr = -2055 #QT for Windows error
+noVideoTrackInMovieErr = -2054 #QT for Windows error
+cantCreateSingleForkFile = -2022 #happens when file already exists
+dragNotAcceptedErr = -1857 #drag was not accepted by receiver
+handlerNotFoundErr = -1856 #handler not found
+duplicateHandlerErr = -1855 #handler already exists
+cantGetFlavorErr = -1854 #error while trying to get flavor data
+duplicateFlavorErr = -1853 #flavor type already exists
+badDragFlavorErr = -1852 #unknown flavor type
+badDragItemErr = -1851 #unknown drag item reference
+badDragRefErr = -1850 #unknown drag reference
+errOSACantOpenComponent = -1762 #Can't connect to scripting system with that ID
+errOSAComponentMismatch = -1761 #Parameters are from 2 different components
+errAERecordingIsAlreadyOn = -1732 #available only in version 1.0.1 or greater
+errAEUnknownObjectType = -1731 #available only in version 1.0.1 or greater
+errAEEmptyListContainer = -1730 #Attempt to pass empty list as container to accessor
+errAENegativeCount = -1729 #CountProc returned negative value
+errAENoSuchObject = -1728 #e.g.,: specifier asked for the 3rd, but there are only 2. Basically, this indicates a run-time resolution error.
+errAENotAnObjSpec = -1727 #Param to AEResolve not of type 'obj '
+errAEBadTestKey = -1726 #Test is neither typeLogicalDescriptor nor typeCompDescriptor
+errAENoSuchLogical = -1725 #Something other than AND, OR, or NOT
+errAEAccessorNotFound = -1723 #Accessor proc matching wantClass and containerType or wildcards not found
+errAEWrongNumberArgs = -1721 #Logical op kAENOT used with other than 1 term
+errAEImpossibleRange = -1720 #A range like 3rd to 2nd, or 1st to all.
+errAEIllegalIndex = -1719 #index is out of range in a put operation
+errAEReplyNotArrived = -1718 #the contents of the reply you are accessing have not arrived yet
+errAEHandlerNotFound = -1717 #no handler in the dispatch tables fits the parameters to AEGetEventHandler or AEGetCoercionHandler
+errAEUnknownAddressType = -1716 #the target address type is not known
+errAEParamMissed = -1715 #a required parameter was not accessed
+errAENotASpecialFunction = -1714 #there is no special function for/with this keyword
+errAENoUserInteraction = -1713 #no user interaction is allowed
+errAETimeout = -1712 #the AppleEvent timed out
+errAEWaitCanceled = -1711 #in AESend, the user cancelled out of wait loop for reply or receipt
+errAEUnknownSendMode = -1710 #mode wasn't NoReply, WaitReply, or QueueReply or Interaction level is unknown
+errAEReplyNotValid = -1709 #AEResetTimer was passed an invalid reply parameter
+errAEEventNotHandled = -1708 #the AppleEvent was not handled by any handler
+errAENotAppleEvent = -1707 #the event is not in AppleEvent format
+errAENewerVersion = -1706 #need newer version of the AppleEvent manager
+errAEBadListItem = -1705 #the specified list item does not exist
+errAECoercionFail = -1700 #bad parameter data or unable to coerce the data supplied
+fsDataTooBigErr = -1310 #file or volume is too big for system
+fileBoundsErr = -1309 #file's EOF, offset, mark or size is too big
+notARemountErr = -1308 #when _Mount allows only remounts and doesn't get one
+badFidErr = -1307 #file id is dangling or doesn't match with the file number
+sameFileErr = -1306 #can't exchange a file with itself
+desktopDamagedErr = -1305 #desktop database files are corrupted
+catChangedErr = -1304 #the catalog has been modified
+diffVolErr = -1303 #files on different volumes
+notAFileErr = -1302 #directory specified
+fidExists = -1301 #file id already exists
+fidNotFound = -1300 #no file thread exists.
+errRefNum = -1280 #bad connection refNum
+errAborted = -1279 #control call was aborted
+errState = -1278 #bad connection state for this operation
+errOpening = -1277 #open connection request failed
+errAttention = -1276 #attention message too long
+errFwdReset = -1275 #read terminated by forward reset
+errDSPQueueSize = -1274 #DSP Read/Write Queue Too small
+errOpenDenied = -1273 #open connection request was denied
+aspNoAck = -1075 #No ack on attention request (server err)
+aspTooMany = -1074 #Too many clients (server error)
+aspSizeErr = -1073 #Command block too big
+aspSessClosed = -1072 #Session closed
+aspServerBusy = -1071 #Server cannot open another session
+aspParamErr = -1070 #Parameter error
+aspNoServers = -1069 #No servers at that address
+aspNoMoreSess = -1068 #No more sessions on server
+aspBufTooSmall = -1067 #Buffer too small
+aspBadVersNum = -1066 #Server cannot support this ASP version
+nbpNISErr = -1029 #Error trying to open the NIS
+nbpNotFound = -1028 #Name not found on remove
+nbpDuplicate = -1027 #Duplicate name exists already
+nbpConfDiff = -1026 #Name confirmed at different socket
+nbpBuffOvr = -1024 #Buffer overflow in LookupName
+noMaskFoundErr = -1000 #Icon Utilties Error
+guestNotAllowedErr = -932 #destination port requires authentication
+badLocNameErr = -931 #location name malformed
+badServiceMethodErr = -930 #illegal service type, or not supported
+noUserRecErr = -928 #Invalid user reference number
+authFailErr = -927 #unable to authenticate user at destination
+noInformErr = -926 #PPCStart failed because destination did not have inform pending
+networkErr = -925 #An error has occured in the network, not too likely
+noUserRefErr = -924 #unable to create a new userRefNum
+notLoggedInErr = -923 #The default userRefNum does not yet exist
+noDefaultUserErr = -922 #user hasn't typed in owners name in Network Setup Control Pannel
+badPortNameErr = -919 #PPCPortRec malformed
+sessClosedErr = -917 #session was closed
+portClosedErr = -916 #port was closed
+noResponseErr = -915 #unable to contact destination
+noToolboxNameErr = -914 #A system resource is missing, not too likely
+noMachineNameErr = -913 #user hasn't named his Macintosh in the Network Setup Control Panel
+userRejectErr = -912 #Destination rejected the session request
+noUserNameErr = -911 #user name unknown on destination machine
+portNameExistsErr = -910 #port is already open (perhaps in another app)
+badReqErr = -909 #bad parameter or invalid state for operation
+noSessionErr = -908 #Invalid session reference number
+sessTableErr = -907 #Out of session tables, try again later
+destPortErr = -906 #Port does not exist at destination
+localOnlyErr = -905 #Network activity is currently disabled
+noGlobalsErr = -904 #The system is hosed, better re-boot
+noPortErr = -903 #Unable to open port or bad portRefNum
+nameTypeErr = -902 #Invalid or inappropriate locationKindSelector in locationName
+notInitErr = -900 #PPCToolBox not initialized
+hmCloseViewActive = -863 #Returned from HMRemoveBalloon if CloseView was active
+hmNoBalloonUp = -862 #Returned from HMRemoveBalloon if no balloon was visible when call was made
+hmOperationUnsupported = -861 #Returned from HMShowBalloon call if bad method passed to routine
+hmUnknownHelpType = -859 #Returned if help msg record contained a bad type
+hmWrongVersion = -858 #Returned if help mgr resource was the wrong version
+hmSkippedBalloon = -857 #Returned from calls if helpmsg specified a skip balloon
+hmHelpManagerNotInited = -855 #Returned from HMGetHelpMenuHandle if help menu not setup
+hmSameAsLastBalloon = -854 #Returned from HMShowMenuBalloon if menu & item is same as last time
+hmBalloonAborted = -853 #Returned if mouse was moving or mouse wasn't in window port rect
+hmHelpDisabled = -850 #Show Balloons mode was off, call to routine ignored
+rcDBPackNotInited = -813 #attempt to call other routine before InitDBPack
+rcDBWrongVersion = -812 #incompatible versions
+rcDBNoHandler = -811 #no app handler for specified data type
+rcDBBadAsyncPB = -810 #tried to kill a bad pb
+rcDBAsyncNotSupp = -809 #ddev does not support async calls
+rcDBBadDDEV = -808 #bad ddev specified on DBInit
+rcDBBadSessNum = -807 #bad session number for DBGetConnInfo
+noMMUErr = -626 #no MMU present
+cannotDeferErr = -625 #unable to defer additional functions
+interruptsMaskedErr = -624 #donıt call with interrupts masked
+notLockedErr = -623 #specified range of memory is not locked
+cannotMakeContiguousErr = -622 #cannot make specified range contiguous
+notHeldErr = -621 #specified range of memory is not held
+notEnoughMemoryErr = -620 #insufficient physical memory
+noUserInteractionAllowed = -610 #no user interaction allowed
+bufferIsSmall = -607 #error returns from Post and Accept
+appIsDaemon = -606 #app is BG-only, and launch flags disallow this
+appMemFullErr = -605 #application SIZE not big enough for launch
+hardwareConfigErr = -604 #hardware configuration not correct for call
+protocolErr = -603 #app made module calls in improper order
+appModeErr = -602 #memory mode is 32-bit, but app not 32-bit clean
+memFragErr = -601 #not enough room to launch app w/special requirements
+procNotFound = -600 #no eligible process with specified descriptor
+hwParamErr = -502 #bad selector for _HWPriv
+teScrapSizeErr = -501 #scrap item too big for text edit record
+exUserBreak = -492 #user debugger break; execute debugger commands on stack
+strUserBreak = -491 #user debugger break; display string on stack
+userBreak = -490 #user debugger break
+notThePublisherWrn = -463 #not the first registered publisher for that container
+containerAlreadyOpenWrn = -462 #container already opened by this section
+containerNotFoundWrn = -461 #could not find editionContainer at this time
+multiplePublisherWrn = -460 #A Publisher is already registered for that container
+badSubPartErr = -454 #can not use sub parts in this release
+badEditionFileErr = -453 #edition file is corrupt
+notRegisteredSectionErr = -452 #not a registered SectionRecord
+badSectionErr = -451 #not a valid SectionRecord
+editionMgrInitErr = -450 #edition manager not inited by this app
+btKeyAttrErr = -417 #There is no such a key attribute.
+btKeyLenErr = -416 #Maximum key length is too long or equal to zero.
+btRecNotFnd = -415 #Record cannot be found.
+btDupRecErr = -414 #Record already exists.
+btNoSpace = -413 #Can't allocate disk space.
+notBTree = -410 #The file is not a dictionary.
+gcrOnMFMErr = -400 #gcr format on high density media error
+slotNumErr = -360 #invalid slot # error
+smRecNotFnd = -351 #Record not found in the SRT.
+smSRTOvrFlErr = -350 #SRT over flow.
+smNoGoodOpens = -349 #No opens were successfull in the loop.
+smOffsetErr = -348 #Offset was too big (temporary error
+smByteLanesErr = -347 #NumByteLanes was determined to be zero.
+smBadsPtrErr = -346 #Bad pointer was passed to sCalcsPointer
+smsGetDrvrErr = -345 #Error occurred during _sGetDriver.
+smNoMoresRsrcs = -344 #No more sResources
+smDisDrvrNamErr = -343 #Error occured during _sDisDrvrName.
+smGetDrvrNamErr = -342 #Error occured during _sGetDrvrName.
+smCkStatusErr = -341 #Status of slot = fail.
+smBlkMoveErr = -340 #_BlockMove error
+smNewPErr = -339 #_NewPtr error
+smSelOOBErr = -338 #Selector out of bounds error
+smSlotOOBErr = -337 #Slot out of bounds error
+smNilsBlockErr = -336 #Nil sBlock error (Dont allocate and try to use a nil sBlock)
+smsPointerNil = -335 #LPointer is nil From sOffsetData. If this error occurs; check sInfo rec for more information.
+smCPUErr = -334 #Code revision is wrong
+smCodeRevErr = -333 #Code revision is wrong
+smReservedErr = -332 #Reserved field not zero
+smBadsList = -331 #Bad sList: Id1 < Id2 < Id3 ...format is not followed.
+smBadRefId = -330 #Reference Id not found in List
+smBusErrTO = -320 #BusError time out.
+smBadBoardId = -319 #BoardId was wrong; re-init the PRAM record.
+smNoJmpTbl = -318 #SDM jump table could not be created.
+smInitTblVErr = -317 #An error occured while trying to initialize the Slot Resource Table.
+smInitStatVErr = -316 #The InitStatusV field was negative after primary or secondary init.
+smNoBoardId = -315 #No Board Id.
+smGetPRErr = -314 #Error occured during _sGetPRAMRec (See SIMStatus).
+smNoBoardSRsrc = -313 #No Board sResource.
+smDisposePErr = -312 #_DisposePointer error
+smFHBlkDispErr = -311 #Error occured during _sDisposePtr (Dispose of FHeader block).
+smFHBlockRdErr = -310 #Error occured during _sGetFHeader.
+smBLFieldBad = -309 #ByteLanes field was bad.
+smUnExBusErr = -308 #Unexpected BusError
+smResrvErr = -307 #Fatal reserved error. Resreved field <> 0.
+smNosInfoArray = -306 #No sInfoArray. Memory Mgr error.
+smDisabledSlot = -305 #This slot is disabled (-305 use to be smLWTstBad)
+smNoDir = -304 #Directory offset is Nil
+smRevisionErr = -303 #Wrong revison level
+smFormatErr = -302 #FHeader Format is not Apple's
+smCRCFail = -301 #CRC check failed for declaration data
+smEmptySlot = -300 #No card in slot
+nmTypErr = -299 #wrong queue type
+smPriInitErr = -293 #Error; Cards could not be initialized.
+smPRAMInitErr = -292 #Error; Slot Resource Table could not be initialized.
+smSRTInitErr = -291 #Error; Slot Resource Table could not be initialized.
+smSDMInitErr = -290 #Error; SDM could not be initialized.
+midiInvalidCmdErr = -261 #command not supported for port type
+midiDupIDErr = -260 #duplicate client ID
+midiNameLenErr = -259 #name supplied is longer than 31 characters
+midiWriteErr = -258 #MIDIWritePacket couldn't write to all connected ports
+midiNoConErr = -257 #no connection exists between specified ports
+midiVConnectRmvd = -256 #pending virtual connection removed
+midiVConnectMade = -255 #pending virtual connection resolved
+midiVConnectErr = -254 #pending virtual connection created
+midiTooManyConsErr = -253 #too many connections made
+midiTooManyPortsErr = -252 #too many ports already installed in the system
+midiNoPortErr = -251 #no port with that ID found
+midiNoClientErr = -250 #no client with that ID found
+siUnknownQuality = -232 #invalid quality selector (returned by driver)
+siUnknownInfoType = -231 #invalid info type selector (returned by driver)
+siInputDeviceErr = -230 #input device hardware failure
+siBadRefNum = -229 #invalid input device reference number
+siBadDeviceName = -228 #input device could not be opened
+siDeviceBusyErr = -227 #input device already in use
+siInvalidSampleSize = -226 #invalid sample size
+siInvalidSampleRate = -225 #invalid sample rate
+siHardDriveTooSlow = -224 #hard drive too slow to record to disk
+siInvalidCompression = -223 #invalid compression type
+siNoBufferSpecified = -222 #returned by synchronous SPBRecord if nil buffer passed
+siBadSoundInDevice = -221 #invalid index passed to SoundInGetIndexedDevice
+siNoSoundInHardware = -220 #no Sound Input hardware
+noMoreRealTime = -212 #not enough CPU cycles left to add another task
+buffersTooSmall = -210 #can not operate in the memory allowed
+channelBusy = -209 #the Channel is being used for a PFD already
+badFileFormat = -208 #was not type AIFF or was of bad format,corrupt
+notEnoughBufferSpace = -207 #could not allocate enough memory
+badFormat = -206 #Sound Manager Error Returns
+badChannel = -205 #Sound Manager Error Returns
+resProblem = -204 #Sound Manager Error Returns
+queueFull = -203 #Sound Manager Error Returns
+notEnoughHardwareErr = -201 #Sound Manager Error Returns
+noHardwareErr = -200 #Sound Manager Error Returns
+mapReadErr = -199 #map inconsistent with operation
+resAttrErr = -198 #attribute inconsistent with operation
+rmvRefFailed = -197 #RmveReference failed
+rmvResFailed = -196 #RmveResource failed
+addRefFailed = -195 #AddReference failed
+addResFailed = -194 #AddResource failed
+resFNotFound = -193 #Resource file not found
+resNotFound = -192 #Resource not found
+inputOutOfBounds = -190 #Offset of Count out of bounds
+writingPastEnd = -189 #Writing past end of file
+resourceInMemory = -188 #Resource already in memory
+CantDecompress = -186 #resource bent ("the bends") - can't decompress a compressed resource
+badExtResource = -185 #extended resource has a bad format.
+cDepthErr = -157 #invalid pixel depth
+cResErr = -156 #invalid resolution for MakeITable
+cDevErr = -155 #invalid type of graphics device
+cProtectErr = -154 #colorTable entry protection violation
+cRangeErr = -153 #range error on colorTable request
+cNoMemErr = -152 #failed to allocate memory for structure
+cTempMemErr = -151 #failed to allocate memory for temporary structures
+cMatchErr = -150 #Color2Index failed to find an index
+hMenuFindErr = -127 #could not find HMenu's parent in MenuKey
+mBarNFnd = -126 #system error code for MBDF not found
+updPixMemErr = -125 #insufficient memory to update a pixmap
+volGoneErr = -124 #Server volume has been disconnected.
+wrgVolTypErr = -123 #Wrong volume type error [operation not supported for MFS]
+badMovErr = -122 #Move into offspring error
+tmwdoErr = -121 #No free WDCB available
+dirNFErr = -120 #Directory not found
+memLockedErr = -117 #trying to move a locked block (MoveHHi)
+memSCErr = -116 #Size Check failed
+memBCErr = -115 #Block Check failed
+memPCErr = -114 #Pointer Check failed
+memAZErr = -113 #Address in zone check failed
+memPurErr = -112 #trying to purge a locked or non-purgeable block
+memWZErr = -111 #WhichZone failed (applied to free block)
+memAdrErr = -110 #address was odd; or out of range
+nilHandleErr = -109 #Master Pointer was NIL in HandleZone or other
+memFullErr = -108 #Not enough room in heap zone
+noTypeErr = -102 #No object of that type in scrap
+noScrapErr = -100 #No scrap exists error
+memROZWarn = -99 #soft error in ROZ
+portNotCf = -98 #driver Open error code (parameter RAM not configured for this connection)
+portInUse = -97 #driver Open error code (port is in use)
+portNotPwr = -96 #serial port not currently powered
+excessCollsns = -95 #excessive collisions on write
+lapProtErr = -94 #error in attaching/detaching protocol
+noBridgeErr = -93 #no network bridge for non-local send
+ddpLenErr = -92 #data length too big
+ddpSktErr = -91 #error in soket number
+breakRecd = -90 #Break received (SCC)
+rcvrErr = -89 #SCC receiver error (framing; parity; OR)
+prInitErr = -88 #InitUtil found the parameter ram uninitialized
+prWrErr = -87 #parameter ram written didn't read-verify
+clkWrErr = -86 #time written did not verify
+clkRdErr = -85 #unable to read same clock value twice
+firstDskErr = -84 #I/O System Errors
+fmt2Err = -83 #can't get enough sync
+fmt1Err = -82 #can't find sector 0 after track format
+sectNFErr = -81 #sector number never found on a track
+seekErr = -80 #track number wrong on address mark
+spdAdjErr = -79 #unable to correctly adjust disk speed
+twoSideErr = -78 #tried to read 2nd side on a 1-sided drive
+initIWMErr = -77 #unable to initialize IWM
+tk0BadErr = -76 #track 0 detect doesn't change
+cantStepErr = -75 #step handshake failed
+wrUnderrun = -74 #write underrun occurred
+badDBtSlp = -73 #bad data mark bit slip nibbles
+badDCksum = -72 #bad data mark checksum
+noDtaMkErr = -71 #couldn't find a data mark header
+badBtSlpErr = -70 #bad addr mark bit slip nibbles
+badCksmErr = -69 #addr mark checksum didn't check
+dataVerErr = -68 #read verify compare failed
+noAdrMkErr = -67 #couldn't find valid addr mark
+fontSubErr = -66 #font substitution occured
+fontNotDeclared = -65 #font not declared
+fontDecError = -64 #error during font declaration
+wrPermErr = -61 #write permissions error
+badMDBErr = -60 #bad master directory block
+fsRnErr = -59 #file system internal error:during rename the old entry was deleted but could not be restored.
+extFSErr = -58 #volume in question belongs to an external fs
+noMacDskErr = -57 #not a mac diskette (sig bytes are wrong)
+nsDrvErr = -56 #no such drive (tried to mount a bad drive num)
+volOnLinErr = -55 #drive volume already on-line at MountVol
+permErr = -54 #permissions error (on file open)
+volOffLinErr = -53 #volume not on line error (was Ejected)
+gfpErr = -52 #get file position error
+rfNumErr = -51 #refnum error
+paramErr = -50 #error in user parameter list
+opWrErr = -49 #file already open with with write permission
+dupFNErr = -48 #duplicate filename (rename)
+fBsyErr = -47 #File is busy (delete)
+vLckdErr = -46 #volume is locked
+fLckdErr = -45 #file is locked
+wPrErr = -44 #diskette is write protected.
+fnfErr = -43 #File not found
+tmfoErr = -42 #too many files open
+mFulErr = -41 #memory full (open) or file won't fit (load)
+posErr = -40 #tried to position to before start of file (r/w)
+eofErr = -39 #End of file
+fnOpnErr = -38 #File not open
+bdNamErr = -37 #there may be no bad names in the final system!
+ioErr = -36 #I/O error (bummers)
+nsvErr = -35 #no such volume
+dskFulErr = -34 #disk full
+dirFulErr = -33 #Directory full
+dceExtErr = -30 #dce extension error
+unitTblFullErr = -29 #unit table has no more entries
+notOpenErr = -28 #Couldn't rd/wr/ctl/sts cause driver not opened
+abortErr = -27 #IO call aborted by KillIO
+dInstErr = -26 #DrvrInstall couldn't find driver in resources
+dRemovErr = -25 #tried to remove an open driver
+closErr = -24 #I/O System Errors
+openErr = -23 #I/O System Errors
+unitEmptyErr = -22 #I/O System Errors
+badUnitErr = -21 #I/O System Errors
+writErr = -20 #I/O System Errors
+readErr = -19 #I/O System Errors
+statusErr = -18 #I/O System Errors
+controlErr = -17 #I/O System Errors
+dsExtensionsDisabled = -13 #say ³Extensions Disabled²
+dsHD20Installed = -12 #say ³HD20 Startup²
+dsDisassemblerInstalled = -11 #say ³Disassembler Installed²
+dsMacsBugInstalled = -10 #say ³MacsBug Installed²
+seNoDB = -8 #no debugger installed to handle debugger command
+SlpTypeErr = -5 #invalid queue element
+unimpErr = -4 #unimplemented core routine
+corErr = -3 #core routine number out of range
+vTypErr = -2 #invalid queue element
+qErr = -1 #queue element not found during deletion
+tsmComponentNoErr = 0 #component result = no error
+EPERM = 1 #Operation not permitted
+ENOENT = 2 #No such file or directory
+ESRCH = 3 #No such process
+EINTR = 4 #Interrupted system call
+EIO = 5 #Input/output error
+ENXIO = 6 #Device not configured
+E2BIG = 7 #Argument list too long
+ENOEXEC = 8 #Exec format error
+EBADF = 9 #Bad file descriptor
+ECHILD = 10 #No child processes
+EDEADLK = 11 #Resource deadlock avoided
+ENOMEM = 12 #Cannot allocate memory
+EACCES = 13 #Permission denied
+EFAULT = 14 #Bad address
+ENOTBLK = 15 #Block device required
+EBUSY = 16 #Device busy
+EEXIST = 17 #File exists
+EXDEV = 18 #Cross-device link
+ENODEV = 19 #Operation not supported by device
+ENOTDIR = 20 #Not a directory
+EISDIR = 21 #Is a directory
+EINVAL = 22 #Invalid argument
+ENFILE = 23 #Too many open files in system
+EMFILE = 24 #Too many open files
+ENOTTY = 25 #Inappropriate ioctl for device
+ETXTBSY = 26 #Text file busy
+EFBIG = 27 #File too large
+ENOSPC = 28 #No space left on device
+ESPIPE = 29 #Illegal seek
+EROFS = 30 #Read-only file system
+EMLINK = 31 #Too many links
+EPIPE = 32 #Broken pipe
+EDOM = 33 #Numerical argument out of domain
+ERANGE = 34 #Result too large
+EAGAIN = 35 #Resource temporarily unavailable
+EINPROGRESS = 36 #Operation now in progress
+EALREADY = 37 #Operation already in progress
+ENOTSOCK = 38 #Socket operation on non-socket
+EDESTADDRREQ = 39 #Destination address required
+EMSGSIZE = 40 #Message too long
+EPROTOTYPE = 41 #Protocol wrong type for socket
+ENOPROTOOPT = 42 #Protocol not available
+EPROTONOSUPPORT = 43 #Protocol not supported
+ESOCKTNOSUPPORT = 44 #Socket type not supported
+EOPNOTSUPP = 45 #Operation not supported on socket
+EPFNOSUPPORT = 46 #Protocol family not supported
+EAFNOSUPPORT = 47 #Address family not supported by protocol family
+EADDRINUSE = 48 #Address already in use
+EADDRNOTAVAIL = 49 #Can't assign requested address
+ENETDOWN = 50 #Network is down
+ENETUNREACH = 51 #Network is unreachable
+ENETRESET = 52 #Network dropped connection on reset
+ECONNABORTED = 53 #Software caused connection abort
+ECONNRESET = 54 #Connection reset by peer
+ENOBUFS = 55 #No buffer space available
+EISCONN = 56 #Socket is already connected
+ENOTCONN = 57 #Socket is not connected
+ESHUTDOWN = 58 #Can't send after socket shutdown
+ETOOMANYREFS = 59 #Too many references: can't splice
+ETIMEDOUT = 60 #Connection timed out
+ECONNREFUSED = 61 #Connection refused
+ELOOP = 62 #Too many levels of symbolic links
+ENAMETOOLONG = 63 #File name too long
+EHOSTDOWN = 64 #Host is down
+EHOSTUNREACH = 65 #No route to host
+ENOTEMPTY = 66 #Directory not empty
+EPROCLIM = 67 #Too many processes
+EUSERS = 68 #Too many users
+EDQUOT = 69 #Disc quota exceeded
+ESTALE = 70 #Stale NFS file handle
+EREMOTE = 71 #Too many levels of remote in path
+EBADRPC = 72 #RPC struct is bad
+ERPCMISMATCH = 73 #RPC version wrong
+EPROGUNAVAIL = 74 #RPC prog. not avail
+EPROGMISMATCH = 75 #Program version wrong
+EPROCUNAVAIL = 76 #Bad procedure for program
+ENOLCK = 77 #No locks available
+ENOSYS = 78 #Function not implemented
+EFTYPE = 79 #Inappropriate file type or format