Issue #5078: Avoid redundant call to FormatError()

1 files changed, 142 insertions, 146 deletions

diff --git a/Modules/_ctypes/callproc.c b/Modules/_ctypes/callproc.c
index dcd4c76..ec6d05b 100644
--- a/Modules/_ctypes/callproc.c
+++ b/Modules/_ctypes/callproc.c
@@ -234,154 +234,150 @@ static TCHAR *FormatError(DWORD code)
 }
 
 #ifndef DONT_USE_SEH
-void SetException(DWORD code, EXCEPTION_RECORD *pr)
+static void SetException(DWORD code, EXCEPTION_RECORD *pr)
 {
-	TCHAR *lpMsgBuf;
-	lpMsgBuf = FormatError(code);
-	if(lpMsgBuf) {
-		PyErr_SetFromWindowsErr(code);
-		LocalFree(lpMsgBuf);
-	} else {
-		switch (code) {
-		case EXCEPTION_ACCESS_VIOLATION:
-			/* The thread attempted to read from or write
-			   to a virtual address for which it does not
-			   have the appropriate access. */
-			if (pr->ExceptionInformation[0] == 0)
-				PyErr_Format(PyExc_WindowsError,
-					     "exception: access violation reading %p",
-					     pr->ExceptionInformation[1]);
-			else
-				PyErr_Format(PyExc_WindowsError,
-					     "exception: access violation writing %p",
-					     pr->ExceptionInformation[1]);
-			break;
-		case EXCEPTION_BREAKPOINT:
-			/* A breakpoint was encountered. */
-			PyErr_SetString(PyExc_WindowsError,
-					"exception: breakpoint encountered");
-			break;
-			
-		case EXCEPTION_DATATYPE_MISALIGNMENT:
-			/* The thread attempted to read or write data that is
-			   misaligned on hardware that does not provide
-			   alignment. For example, 16-bit values must be
-			   aligned on 2-byte boundaries, 32-bit values on
-			   4-byte boundaries, and so on. */
-			PyErr_SetString(PyExc_WindowsError,
-					"exception: datatype misalignment");
-			break;
-
-		case EXCEPTION_SINGLE_STEP:
-			/* A trace trap or other single-instruction mechanism
-			   signaled that one instruction has been executed. */
-			PyErr_SetString(PyExc_WindowsError,
-					"exception: single step");
-			break;
-
-		case EXCEPTION_ARRAY_BOUNDS_EXCEEDED: 
-			/* The thread attempted to access an array element
-			   that is out of bounds, and the underlying hardware
-			   supports bounds checking. */
-			PyErr_SetString(PyExc_WindowsError,
-					"exception: array bounds exceeded");
-			break;
-
-		case EXCEPTION_FLT_DENORMAL_OPERAND:
-			/* One of the operands in a floating-point operation
-			   is denormal. A denormal value is one that is too
-			   small to represent as a standard floating-point
-			   value. */
-			PyErr_SetString(PyExc_WindowsError,
-					"exception: floating-point operand denormal");
-			break;
-
-		case EXCEPTION_FLT_DIVIDE_BY_ZERO:
-			/* The thread attempted to divide a floating-point
-			   value by a floating-point divisor of zero. */
-			PyErr_SetString(PyExc_WindowsError,
-					"exception: float divide by zero");
-			break;
-
-		case EXCEPTION_FLT_INEXACT_RESULT:
-			/* The result of a floating-point operation cannot be
-			   represented exactly as a decimal fraction. */
-			PyErr_SetString(PyExc_WindowsError,
-					"exception: float inexact");
-			break;
-
-		case EXCEPTION_FLT_INVALID_OPERATION:
-			/* This exception represents any floating-point
-			   exception not included in this list. */
-			PyErr_SetString(PyExc_WindowsError,
-					"exception: float invalid operation");
-			break;
-
-		case EXCEPTION_FLT_OVERFLOW:
-			/* The exponent of a floating-point operation is
-			   greater than the magnitude allowed by the
-			   corresponding type. */
-			PyErr_SetString(PyExc_WindowsError,
-					"exception: float overflow");
-			break;
-
-		case EXCEPTION_FLT_STACK_CHECK:
-			/* The stack overflowed or underflowed as the result
-			   of a floating-point operation. */
-			PyErr_SetString(PyExc_WindowsError,
-					"exception: stack over/underflow");
-			break;
-
-		case EXCEPTION_STACK_OVERFLOW:
-			/* The stack overflowed or underflowed as the result
-			   of a floating-point operation. */
-			PyErr_SetString(PyExc_WindowsError,
-					"exception: stack overflow");
-			break;
-
-		case EXCEPTION_FLT_UNDERFLOW:
-			/* The exponent of a floating-point operation is less
-			   than the magnitude allowed by the corresponding
-			   type. */
-			PyErr_SetString(PyExc_WindowsError,
-					"exception: float underflow");
-			break;
-
-		case EXCEPTION_INT_DIVIDE_BY_ZERO:
-			/* The thread attempted to divide an integer value by
-			   an integer divisor of zero. */
-			PyErr_SetString(PyExc_WindowsError,
-					"exception: integer divide by zero");
-			break;
-
-		case EXCEPTION_INT_OVERFLOW:
-			/* The result of an integer operation caused a carry
-			   out of the most significant bit of the result. */
-			PyErr_SetString(PyExc_WindowsError,
-					"exception: integer overflow");
-			break;
-
-		case EXCEPTION_PRIV_INSTRUCTION:
-			/* The thread attempted to execute an instruction
-			   whose operation is not allowed in the current
-			   machine mode. */
-			PyErr_SetString(PyExc_WindowsError,
-					"exception: priviledged instruction");
-			break;
-
-		case EXCEPTION_NONCONTINUABLE_EXCEPTION:
-			/* The thread attempted to continue execution after a
-			   noncontinuable exception occurred. */
-			PyErr_SetString(PyExc_WindowsError,
-					"exception: nocontinuable");
-			break;
-		default:
-			printf("error %d\n", code);
+	/* The 'code' is a normal win32 error code so it could be handled by
+	PyErr_SetFromWindowsErr(). However, for some errors, we have additional
+	information not included in the error code. We handle those here and
+	delegate all others to the generic function. */
+	switch (code) {
+	case EXCEPTION_ACCESS_VIOLATION:
+		/* The thread attempted to read from or write
+		   to a virtual address for which it does not
+		   have the appropriate access. */
+		if (pr->ExceptionInformation[0] == 0)
 			PyErr_Format(PyExc_WindowsError,
-				     "exception code 0x%08x",
-				     code);
-			break;
-		}
+				     "exception: access violation reading %p",
+				     pr->ExceptionInformation[1]);
+		else
+			PyErr_Format(PyExc_WindowsError,
+				     "exception: access violation writing %p",
+				     pr->ExceptionInformation[1]);
+		break;
+
+	case EXCEPTION_BREAKPOINT:
+		/* A breakpoint was encountered. */
+		PyErr_SetString(PyExc_WindowsError,
+				"exception: breakpoint encountered");
+		break;
+
+	case EXCEPTION_DATATYPE_MISALIGNMENT:
+		/* The thread attempted to read or write data that is
+		   misaligned on hardware that does not provide
+		   alignment. For example, 16-bit values must be
+		   aligned on 2-byte boundaries, 32-bit values on
+		   4-byte boundaries, and so on. */
+		PyErr_SetString(PyExc_WindowsError,
+				"exception: datatype misalignment");
+		break;
+
+	case EXCEPTION_SINGLE_STEP:
+		/* A trace trap or other single-instruction mechanism
+		   signaled that one instruction has been executed. */
+		PyErr_SetString(PyExc_WindowsError,
+				"exception: single step");
+		break;
+
+	case EXCEPTION_ARRAY_BOUNDS_EXCEEDED: 
+		/* The thread attempted to access an array element
+		   that is out of bounds, and the underlying hardware
+		   supports bounds checking. */
+		PyErr_SetString(PyExc_WindowsError,
+				"exception: array bounds exceeded");
+		break;
+
+	case EXCEPTION_FLT_DENORMAL_OPERAND:
+		/* One of the operands in a floating-point operation
+		   is denormal. A denormal value is one that is too
+		   small to represent as a standard floating-point
+		   value. */
+		PyErr_SetString(PyExc_WindowsError,
+				"exception: floating-point operand denormal");
+		break;
+
+	case EXCEPTION_FLT_DIVIDE_BY_ZERO:
+		/* The thread attempted to divide a floating-point
+		   value by a floating-point divisor of zero. */
+		PyErr_SetString(PyExc_WindowsError,
+				"exception: float divide by zero");
+		break;
+
+	case EXCEPTION_FLT_INEXACT_RESULT:
+		/* The result of a floating-point operation cannot be
+		   represented exactly as a decimal fraction. */
+		PyErr_SetString(PyExc_WindowsError,
+				"exception: float inexact");
+		break;
+
+	case EXCEPTION_FLT_INVALID_OPERATION:
+		/* This exception represents any floating-point
+		   exception not included in this list. */
+		PyErr_SetString(PyExc_WindowsError,
+				"exception: float invalid operation");
+		break;
+
+	case EXCEPTION_FLT_OVERFLOW:
+		/* The exponent of a floating-point operation is
+		   greater than the magnitude allowed by the
+		   corresponding type. */
+		PyErr_SetString(PyExc_WindowsError,
+				"exception: float overflow");
+		break;
+
+	case EXCEPTION_FLT_STACK_CHECK:
+		/* The stack overflowed or underflowed as the result
+		   of a floating-point operation. */
+		PyErr_SetString(PyExc_WindowsError,
+				"exception: stack over/underflow");
+		break;
+
+	case EXCEPTION_STACK_OVERFLOW:
+		/* The stack overflowed or underflowed as the result
+		   of a floating-point operation. */
+		PyErr_SetString(PyExc_WindowsError,
+				"exception: stack overflow");
+		break;
+
+	case EXCEPTION_FLT_UNDERFLOW:
+		/* The exponent of a floating-point operation is less
+		   than the magnitude allowed by the corresponding
+		   type. */
+		PyErr_SetString(PyExc_WindowsError,
+				"exception: float underflow");
+		break;
+
+	case EXCEPTION_INT_DIVIDE_BY_ZERO:
+		/* The thread attempted to divide an integer value by
+		   an integer divisor of zero. */
+		PyErr_SetString(PyExc_WindowsError,
+				"exception: integer divide by zero");
+		break;
+
+	case EXCEPTION_INT_OVERFLOW:
+		/* The result of an integer operation caused a carry
+		   out of the most significant bit of the result. */
+		PyErr_SetString(PyExc_WindowsError,
+				"exception: integer overflow");
+		break;
+
+	case EXCEPTION_PRIV_INSTRUCTION:
+		/* The thread attempted to execute an instruction
+		   whose operation is not allowed in the current
+		   machine mode. */
+		PyErr_SetString(PyExc_WindowsError,
+				"exception: priviledged instruction");
+		break;
+
+	case EXCEPTION_NONCONTINUABLE_EXCEPTION:
+		/* The thread attempted to continue execution after a
+		   noncontinuable exception occurred. */
+		PyErr_SetString(PyExc_WindowsError,
+				"exception: nocontinuable");
+		break;
+
+	default:
+		PyErr_SetFromWindowsErr(code);
+		break;
 	}
 }