diff options
Diffstat (limited to 'Doc/c-api')
55 files changed, 2052 insertions, 2052 deletions
diff --git a/Doc/c-api/abstract.rst b/Doc/c-api/abstract.rst index 59e4cc4..bc9001c 100644 --- a/Doc/c-api/abstract.rst +++ b/Doc/c-api/abstract.rst @@ -13,7 +13,7 @@ sequence types). When used on object types for which they do not apply, they will raise a Python exception. It is not possible to use these functions on objects that are not properly -initialized, such as a list object that has been created by :cfunc:`PyList_New`, +initialized, such as a list object that has been created by :c:func:`PyList_New`, but whose items have not been set to some non-\ ``NULL`` value yet. .. toctree:: diff --git a/Doc/c-api/allocation.rst b/Doc/c-api/allocation.rst index 28b9c56..cb43cbf 100644 --- a/Doc/c-api/allocation.rst +++ b/Doc/c-api/allocation.rst @@ -6,20 +6,20 @@ Allocating Objects on the Heap ============================== -.. cfunction:: PyObject* _PyObject_New(PyTypeObject *type) +.. c:function:: PyObject* _PyObject_New(PyTypeObject *type) -.. cfunction:: PyVarObject* _PyObject_NewVar(PyTypeObject *type, Py_ssize_t size) +.. c:function:: PyVarObject* _PyObject_NewVar(PyTypeObject *type, Py_ssize_t size) .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *size*. This might require + This function used an :c:type:`int` type for *size*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: void _PyObject_Del(PyObject *op) +.. c:function:: void _PyObject_Del(PyObject *op) -.. cfunction:: PyObject* PyObject_Init(PyObject *op, PyTypeObject *type) +.. c:function:: PyObject* PyObject_Init(PyObject *op, PyTypeObject *type) Initialize a newly-allocated object *op* with its type and initial reference. Returns the initialized object. If *type* indicates that the @@ -28,17 +28,17 @@ Allocating Objects on the Heap affected. -.. cfunction:: PyVarObject* PyObject_InitVar(PyVarObject *op, PyTypeObject *type, Py_ssize_t size) +.. c:function:: PyVarObject* PyObject_InitVar(PyVarObject *op, PyTypeObject *type, Py_ssize_t size) - This does everything :cfunc:`PyObject_Init` does, and also initializes the + This does everything :c:func:`PyObject_Init` does, and also initializes the length information for a variable-size object. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *size*. This might require + This function used an :c:type:`int` type for *size*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: TYPE* PyObject_New(TYPE, PyTypeObject *type) +.. c:function:: TYPE* PyObject_New(TYPE, PyTypeObject *type) Allocate a new Python object using the C structure type *TYPE* and the Python type object *type*. Fields not defined by the Python object header @@ -47,7 +47,7 @@ Allocating Objects on the Heap the type object. -.. cfunction:: TYPE* PyObject_NewVar(TYPE, PyTypeObject *type, Py_ssize_t size) +.. c:function:: TYPE* PyObject_NewVar(TYPE, PyTypeObject *type, Py_ssize_t size) Allocate a new Python object using the C structure type *TYPE* and the Python type object *type*. Fields not defined by the Python object header @@ -59,20 +59,20 @@ Allocating Objects on the Heap improving the memory management efficiency. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *size*. This might require + This function used an :c:type:`int` type for *size*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: void PyObject_Del(PyObject *op) +.. c:function:: void PyObject_Del(PyObject *op) - Releases memory allocated to an object using :cfunc:`PyObject_New` or - :cfunc:`PyObject_NewVar`. This is normally called from the + Releases memory allocated to an object using :c:func:`PyObject_New` or + :c:func:`PyObject_NewVar`. This is normally called from the :attr:`tp_dealloc` handler specified in the object's type. The fields of the object should not be accessed after this call as the memory is no longer a valid Python object. -.. cfunction:: PyObject* Py_InitModule(char *name, PyMethodDef *methods) +.. c:function:: PyObject* Py_InitModule(char *name, PyMethodDef *methods) Create a new module object based on a name and table of functions, returning the new module object. @@ -82,7 +82,7 @@ Allocating Objects on the Heap *methods* argument. -.. cfunction:: PyObject* Py_InitModule3(char *name, PyMethodDef *methods, char *doc) +.. c:function:: PyObject* Py_InitModule3(char *name, PyMethodDef *methods, char *doc) Create a new module object based on a name and table of functions, returning the new module object. If *doc* is non-*NULL*, it will be used @@ -93,7 +93,7 @@ Allocating Objects on the Heap *methods* argument. -.. cfunction:: PyObject* Py_InitModule4(char *name, PyMethodDef *methods, char *doc, PyObject *self, int apiver) +.. c:function:: PyObject* Py_InitModule4(char *name, PyMethodDef *methods, char *doc, PyObject *self, int apiver) Create a new module object based on a name and table of functions, returning the new module object. If *doc* is non-*NULL*, it will be used @@ -107,7 +107,7 @@ Allocating Objects on the Heap .. note:: Most uses of this function should probably be using the - :cfunc:`Py_InitModule3` instead; only use this if you are sure you need + :c:func:`Py_InitModule3` instead; only use this if you are sure you need it. .. versionchanged:: 2.3 @@ -115,7 +115,7 @@ Allocating Objects on the Heap *methods* argument. -.. cvar:: PyObject _Py_NoneStruct +.. c:var:: PyObject _Py_NoneStruct Object which is visible in Python as ``None``. This should only be accessed using the ``Py_None`` macro, which evaluates to a pointer to this diff --git a/Doc/c-api/arg.rst b/Doc/c-api/arg.rst index 4f8591b..8fbdc50 100644 --- a/Doc/c-api/arg.rst +++ b/Doc/c-api/arg.rst @@ -9,8 +9,8 @@ These functions are useful when creating your own extensions functions and methods. Additional information and examples are available in :ref:`extending-index`. -The first three of these functions described, :cfunc:`PyArg_ParseTuple`, -:cfunc:`PyArg_ParseTupleAndKeywords`, and :cfunc:`PyArg_Parse`, all use +The first three of these functions described, :c:func:`PyArg_ParseTuple`, +:c:func:`PyArg_ParseTupleAndKeywords`, and :c:func:`PyArg_Parse`, all use *format strings* which are used to tell the function about the expected arguments. The format strings use the same syntax for each of these functions. @@ -38,7 +38,7 @@ area. Also, you won't have to release any memory yourself, except with the raised. Unicode objects are converted to C strings using the default encoding. If this conversion fails, a :exc:`UnicodeError` is raised. -``s#`` (string, Unicode or any read buffer compatible object) [const char \*, int (or :ctype:`Py_ssize_t`, see below)] +``s#`` (string, Unicode or any read buffer compatible object) [const char \*, int (or :c:type:`Py_ssize_t`, see below)] This variant on ``s`` stores into two C variables, the first one a pointer to a character string, the second one its length. In this case the Python string may contain embedded null bytes. Unicode objects pass back a @@ -47,8 +47,8 @@ area. Also, you won't have to release any memory yourself, except with the a reference to the raw internal data representation. Starting with Python 2.5 the type of the length argument can be controlled - by defining the macro :cmacro:`PY_SSIZE_T_CLEAN` before including - :file:`Python.h`. If the macro is defined, length is a :ctype:`Py_ssize_t` + by defining the macro :c:macro:`PY_SSIZE_T_CLEAN` before including + :file:`Python.h`. If the macro is defined, length is a :c:type:`Py_ssize_t` rather than an int. ``s*`` (string, Unicode, or any buffer compatible object) [Py_buffer] @@ -76,14 +76,14 @@ area. Also, you won't have to release any memory yourself, except with the Convert a Python Unicode object to a C pointer to a NUL-terminated buffer of 16-bit Unicode (UTF-16) data. As with ``s``, there is no need to provide storage for the Unicode data buffer; a pointer to the existing - Unicode data is stored into the :ctype:`Py_UNICODE` pointer variable whose + Unicode data is stored into the :c:type:`Py_UNICODE` pointer variable whose address you pass. ``u#`` (Unicode) [Py_UNICODE \*, int] This variant on ``u`` stores into two C variables, the first one a pointer to a Unicode data buffer, the second one its length. Non-Unicode objects are handled by interpreting their read-buffer pointer as pointer to a - :ctype:`Py_UNICODE` array. + :c:type:`Py_UNICODE` array. ``es`` (string, Unicode or character buffer compatible object) [const char \*encoding, char \*\*buffer] This variant on ``s`` is used for encoding Unicode and objects convertible @@ -91,18 +91,18 @@ area. Also, you won't have to release any memory yourself, except with the embedded NUL bytes. This format requires two arguments. The first is only used as input, and - must be a :ctype:`const char\*` which points to the name of an encoding as + must be a :c:type:`const char\*` which points to the name of an encoding as a NUL-terminated string, or *NULL*, in which case the default encoding is used. An exception is raised if the named encoding is not known to Python. - The second argument must be a :ctype:`char\*\*`; the value of the pointer + The second argument must be a :c:type:`char\*\*`; the value of the pointer it references will be set to a buffer with the contents of the argument text. The text will be encoded in the encoding specified by the first argument. - :cfunc:`PyArg_ParseTuple` will allocate a buffer of the needed size, copy + :c:func:`PyArg_ParseTuple` will allocate a buffer of the needed size, copy the encoded data into this buffer and adjust *\*buffer* to reference the newly allocated storage. The caller is responsible for calling - :cfunc:`PyMem_Free` to free the allocated buffer after use. + :c:func:`PyMem_Free` to free the allocated buffer after use. ``et`` (string, Unicode or character buffer compatible object) [const char \*encoding, char \*\*buffer] Same as ``es`` except that 8-bit string objects are passed through without @@ -115,10 +115,10 @@ area. Also, you won't have to release any memory yourself, except with the allows input data which contains NUL characters. It requires three arguments. The first is only used as input, and must be - a :ctype:`const char\*` which points to the name of an encoding as a + a :c:type:`const char\*` which points to the name of an encoding as a NUL-terminated string, or *NULL*, in which case the default encoding is used. An exception is raised if the named encoding is not known to Python. - The second argument must be a :ctype:`char\*\*`; the value of the pointer + The second argument must be a :c:type:`char\*\*`; the value of the pointer it references will be set to a buffer with the contents of the argument text. The text will be encoded in the encoding specified by the first argument. The third argument must be a pointer to an integer; the @@ -129,11 +129,11 @@ area. Also, you won't have to release any memory yourself, except with the If *\*buffer* points a *NULL* pointer, the function will allocate a buffer of the needed size, copy the encoded data into this buffer and set *\*buffer* to reference the newly allocated storage. The caller is - responsible for calling :cfunc:`PyMem_Free` to free the allocated buffer + responsible for calling :c:func:`PyMem_Free` to free the allocated buffer after usage. If *\*buffer* points to a non-*NULL* pointer (an already allocated buffer), - :cfunc:`PyArg_ParseTuple` will use this location as the buffer and + :c:func:`PyArg_ParseTuple` will use this location as the buffer and interpret the initial value of *\*buffer_length* as the buffer size. It will then copy the encoded data into the buffer and NUL-terminate it. If the buffer is not large enough, a :exc:`ValueError` will be set. @@ -148,71 +148,71 @@ area. Also, you won't have to release any memory yourself, except with the ``b`` (integer) [unsigned char] Convert a nonnegative Python integer to an unsigned tiny int, stored in a C - :ctype:`unsigned char`. + :c:type:`unsigned char`. ``B`` (integer) [unsigned char] Convert a Python integer to a tiny int without overflow checking, stored in - a C :ctype:`unsigned char`. + a C :c:type:`unsigned char`. .. versionadded:: 2.3 ``h`` (integer) [short int] - Convert a Python integer to a C :ctype:`short int`. + Convert a Python integer to a C :c:type:`short int`. ``H`` (integer) [unsigned short int] - Convert a Python integer to a C :ctype:`unsigned short int`, without + Convert a Python integer to a C :c:type:`unsigned short int`, without overflow checking. .. versionadded:: 2.3 ``i`` (integer) [int] - Convert a Python integer to a plain C :ctype:`int`. + Convert a Python integer to a plain C :c:type:`int`. ``I`` (integer) [unsigned int] - Convert a Python integer to a C :ctype:`unsigned int`, without overflow + Convert a Python integer to a C :c:type:`unsigned int`, without overflow checking. .. versionadded:: 2.3 ``l`` (integer) [long int] - Convert a Python integer to a C :ctype:`long int`. + Convert a Python integer to a C :c:type:`long int`. ``k`` (integer) [unsigned long] - Convert a Python integer or long integer to a C :ctype:`unsigned long` + Convert a Python integer or long integer to a C :c:type:`unsigned long` without overflow checking. .. versionadded:: 2.3 ``L`` (integer) [PY_LONG_LONG] - Convert a Python integer to a C :ctype:`long long`. This format is only - available on platforms that support :ctype:`long long` (or :ctype:`_int64` + Convert a Python integer to a C :c:type:`long long`. This format is only + available on platforms that support :c:type:`long long` (or :c:type:`_int64` on Windows). ``K`` (integer) [unsigned PY_LONG_LONG] - Convert a Python integer or long integer to a C :ctype:`unsigned long long` + Convert a Python integer or long integer to a C :c:type:`unsigned long long` without overflow checking. This format is only available on platforms that - support :ctype:`unsigned long long` (or :ctype:`unsigned _int64` on + support :c:type:`unsigned long long` (or :c:type:`unsigned _int64` on Windows). .. versionadded:: 2.3 ``n`` (integer) [Py_ssize_t] - Convert a Python integer or long integer to a C :ctype:`Py_ssize_t`. + Convert a Python integer or long integer to a C :c:type:`Py_ssize_t`. .. versionadded:: 2.5 ``c`` (string of length 1) [char] Convert a Python character, represented as a string of length 1, to a C - :ctype:`char`. + :c:type:`char`. ``f`` (float) [float] - Convert a Python floating point number to a C :ctype:`float`. + Convert a Python floating point number to a C :c:type:`float`. ``d`` (float) [double] - Convert a Python floating point number to a C :ctype:`double`. + Convert a Python floating point number to a C :c:type:`double`. ``D`` (complex) [Py_complex] - Convert a Python complex number to a C :ctype:`Py_complex` structure. + Convert a Python complex number to a C :c:type:`Py_complex` structure. ``O`` (object) [PyObject \*] Store a Python object (without any conversion) in a C object pointer. The @@ -222,20 +222,20 @@ area. Also, you won't have to release any memory yourself, except with the ``O!`` (object) [*typeobject*, PyObject \*] Store a Python object in a C object pointer. This is similar to ``O``, but takes two C arguments: the first is the address of a Python type object, - the second is the address of the C variable (of type :ctype:`PyObject\*`) + the second is the address of the C variable (of type :c:type:`PyObject\*`) into which the object pointer is stored. If the Python object does not have the required type, :exc:`TypeError` is raised. ``O&`` (object) [*converter*, *anything*] Convert a Python object to a C variable through a *converter* function. This takes two arguments: the first is a function, the second is the - address of a C variable (of arbitrary type), converted to :ctype:`void \*`. + address of a C variable (of arbitrary type), converted to :c:type:`void \*`. The *converter* function in turn is called as follows:: status = converter(object, address); where *object* is the Python object to be converted and *address* is the - :ctype:`void\*` argument that was passed to the :cfunc:`PyArg_Parse\*` + :c:type:`void\*` argument that was passed to the :c:func:`PyArg_Parse\*` function. The returned *status* should be ``1`` for a successful conversion and ``0`` if the conversion has failed. When the conversion fails, the *converter* function should raise an exception and leave the @@ -244,17 +244,17 @@ area. Also, you won't have to release any memory yourself, except with the ``S`` (string) [PyStringObject \*] Like ``O`` but requires that the Python object is a string object. Raises :exc:`TypeError` if the object is not a string object. The C variable may - also be declared as :ctype:`PyObject\*`. + also be declared as :c:type:`PyObject\*`. ``U`` (Unicode string) [PyUnicodeObject \*] Like ``O`` but requires that the Python object is a Unicode object. Raises :exc:`TypeError` if the object is not a Unicode object. The C variable may - also be declared as :ctype:`PyObject\*`. + also be declared as :c:type:`PyObject\*`. ``t#`` (read-only character buffer) [char \*, int] Like ``s#``, but accepts any object which implements the read-only buffer - interface. The :ctype:`char\*` variable is set to point to the first byte - of the buffer, and the :ctype:`int` is set to the length of the buffer. + interface. The :c:type:`char\*` variable is set to point to the first byte + of the buffer, and the :c:type:`int` is set to the length of the buffer. Only single-segment buffer objects are accepted; :exc:`TypeError` is raised for all others. @@ -266,8 +266,8 @@ area. Also, you won't have to release any memory yourself, except with the ``w#`` (read-write character buffer) [char \*, Py_ssize_t] Like ``s#``, but accepts any object which implements the read-write buffer - interface. The :ctype:`char \*` variable is set to point to the first byte - of the buffer, and the :ctype:`Py_ssize_t` is set to the length of the + interface. The :c:type:`char \*` variable is set to point to the first byte + of the buffer, and the :c:type:`Py_ssize_t` is set to the length of the buffer. Only single-segment buffer objects are accepted; :exc:`TypeError` is raised for all others. @@ -302,13 +302,13 @@ inside nested parentheses. They are: Indicates that the remaining arguments in the Python argument list are optional. The C variables corresponding to optional arguments should be initialized to their default value --- when an optional argument is not - specified, :cfunc:`PyArg_ParseTuple` does not touch the contents of the + specified, :c:func:`PyArg_ParseTuple` does not touch the contents of the corresponding C variable(s). ``:`` The list of format units ends here; the string after the colon is used as the function name in error messages (the "associated value" of the - exception that :cfunc:`PyArg_ParseTuple` raises). + exception that :c:func:`PyArg_ParseTuple` raises). ``;`` The list of format units ends here; the string after the semicolon is used @@ -325,40 +325,40 @@ format units above, where these parameters are used as input values; they should match what is specified for the corresponding format unit in that case. For the conversion to succeed, the *arg* object must match the format and the -format must be exhausted. On success, the :cfunc:`PyArg_Parse\*` functions +format must be exhausted. On success, the :c:func:`PyArg_Parse\*` functions return true, otherwise they return false and raise an appropriate exception. -When the :cfunc:`PyArg_Parse\*` functions fail due to conversion failure in +When the :c:func:`PyArg_Parse\*` functions fail due to conversion failure in one of the format units, the variables at the addresses corresponding to that and the following format units are left untouched. -.. cfunction:: int PyArg_ParseTuple(PyObject *args, const char *format, ...) +.. c:function:: int PyArg_ParseTuple(PyObject *args, const char *format, ...) Parse the parameters of a function that takes only positional parameters into local variables. Returns true on success; on failure, it returns false and raises the appropriate exception. -.. cfunction:: int PyArg_VaParse(PyObject *args, const char *format, va_list vargs) +.. c:function:: int PyArg_VaParse(PyObject *args, const char *format, va_list vargs) - Identical to :cfunc:`PyArg_ParseTuple`, except that it accepts a va_list + Identical to :c:func:`PyArg_ParseTuple`, except that it accepts a va_list rather than a variable number of arguments. -.. cfunction:: int PyArg_ParseTupleAndKeywords(PyObject *args, PyObject *kw, const char *format, char *keywords[], ...) +.. c:function:: int PyArg_ParseTupleAndKeywords(PyObject *args, PyObject *kw, const char *format, char *keywords[], ...) Parse the parameters of a function that takes both positional and keyword parameters into local variables. Returns true on success; on failure, it returns false and raises the appropriate exception. -.. cfunction:: int PyArg_VaParseTupleAndKeywords(PyObject *args, PyObject *kw, const char *format, char *keywords[], va_list vargs) +.. c:function:: int PyArg_VaParseTupleAndKeywords(PyObject *args, PyObject *kw, const char *format, char *keywords[], va_list vargs) - Identical to :cfunc:`PyArg_ParseTupleAndKeywords`, except that it accepts a + Identical to :c:func:`PyArg_ParseTupleAndKeywords`, except that it accepts a va_list rather than a variable number of arguments. -.. cfunction:: int PyArg_Parse(PyObject *args, const char *format, ...) +.. c:function:: int PyArg_Parse(PyObject *args, const char *format, ...) Function used to deconstruct the argument lists of "old-style" functions --- these are functions which use the :const:`METH_OLDARGS` parameter @@ -369,7 +369,7 @@ and the following format units are left untouched. purpose. -.. cfunction:: int PyArg_UnpackTuple(PyObject *args, const char *name, Py_ssize_t min, Py_ssize_t max, ...) +.. c:function:: int PyArg_UnpackTuple(PyObject *args, const char *name, Py_ssize_t min, Py_ssize_t max, ...) A simpler form of parameter retrieval which does not use a format string to specify the types of the arguments. Functions which use this method to @@ -378,7 +378,7 @@ and the following format units are left untouched. should be passed as *args*; it must actually be a tuple. The length of the tuple must be at least *min* and no more than *max*; *min* and *max* may be equal. Additional arguments must be passed to the function, each of which - should be a pointer to a :ctype:`PyObject\*` variable; these will be filled + should be a pointer to a :c:type:`PyObject\*` variable; these will be filled in with the values from *args*; they will contain borrowed references. The variables which correspond to optional parameters not given by *args* will not be filled in; these should be initialized by the caller. This function @@ -401,26 +401,26 @@ and the following format units are left untouched. return result; } - The call to :cfunc:`PyArg_UnpackTuple` in this example is entirely - equivalent to this call to :cfunc:`PyArg_ParseTuple`:: + The call to :c:func:`PyArg_UnpackTuple` in this example is entirely + equivalent to this call to :c:func:`PyArg_ParseTuple`:: PyArg_ParseTuple(args, "O|O:ref", &object, &callback) .. versionadded:: 2.2 .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *min* and *max*. This might + This function used an :c:type:`int` type for *min* and *max*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: PyObject* Py_BuildValue(const char *format, ...) +.. c:function:: PyObject* Py_BuildValue(const char *format, ...) Create a new value based on a format string similar to those accepted by - the :cfunc:`PyArg_Parse\*` family of functions and a sequence of values. + the :c:func:`PyArg_Parse\*` family of functions and a sequence of values. Returns the value or *NULL* in the case of an error; an exception will be raised if *NULL* is returned. - :cfunc:`Py_BuildValue` does not always build a tuple. It builds a tuple + :c:func:`Py_BuildValue` does not always build a tuple. It builds a tuple only if its format string contains two or more format units. If the format string is empty, it returns ``None``; if it contains exactly one format unit, it returns whatever object is described by that format unit. To @@ -430,10 +430,10 @@ and the following format units are left untouched. When memory buffers are passed as parameters to supply data to build objects, as for the ``s`` and ``s#`` formats, the required data is copied. Buffers provided by the caller are never referenced by the objects created - by :cfunc:`Py_BuildValue`. In other words, if your code invokes - :cfunc:`malloc` and passes the allocated memory to :cfunc:`Py_BuildValue`, - your code is responsible for calling :cfunc:`free` for that memory once - :cfunc:`Py_BuildValue` returns. + by :c:func:`Py_BuildValue`. In other words, if your code invokes + :c:func:`malloc` and passes the allocated memory to :c:func:`Py_BuildValue`, + your code is responsible for calling :c:func:`free` for that memory once + :c:func:`Py_BuildValue` returns. In the following description, the quoted form is the format unit; the entry in (round) parentheses is the Python object type that the format unit will @@ -469,62 +469,62 @@ and the following format units are left untouched. length is ignored and ``None`` is returned. ``i`` (integer) [int] - Convert a plain C :ctype:`int` to a Python integer object. + Convert a plain C :c:type:`int` to a Python integer object. ``b`` (integer) [char] - Convert a plain C :ctype:`char` to a Python integer object. + Convert a plain C :c:type:`char` to a Python integer object. ``h`` (integer) [short int] - Convert a plain C :ctype:`short int` to a Python integer object. + Convert a plain C :c:type:`short int` to a Python integer object. ``l`` (integer) [long int] - Convert a C :ctype:`long int` to a Python integer object. + Convert a C :c:type:`long int` to a Python integer object. ``B`` (integer) [unsigned char] - Convert a C :ctype:`unsigned char` to a Python integer object. + Convert a C :c:type:`unsigned char` to a Python integer object. ``H`` (integer) [unsigned short int] - Convert a C :ctype:`unsigned short int` to a Python integer object. + Convert a C :c:type:`unsigned short int` to a Python integer object. ``I`` (integer/long) [unsigned int] - Convert a C :ctype:`unsigned int` to a Python integer object or a Python + Convert a C :c:type:`unsigned int` to a Python integer object or a Python long integer object, if it is larger than ``sys.maxint``. ``k`` (integer/long) [unsigned long] - Convert a C :ctype:`unsigned long` to a Python integer object or a + Convert a C :c:type:`unsigned long` to a Python integer object or a Python long integer object, if it is larger than ``sys.maxint``. ``L`` (long) [PY_LONG_LONG] - Convert a C :ctype:`long long` to a Python long integer object. Only - available on platforms that support :ctype:`long long`. + Convert a C :c:type:`long long` to a Python long integer object. Only + available on platforms that support :c:type:`long long`. ``K`` (long) [unsigned PY_LONG_LONG] - Convert a C :ctype:`unsigned long long` to a Python long integer object. - Only available on platforms that support :ctype:`unsigned long long`. + Convert a C :c:type:`unsigned long long` to a Python long integer object. + Only available on platforms that support :c:type:`unsigned long long`. ``n`` (int) [Py_ssize_t] - Convert a C :ctype:`Py_ssize_t` to a Python integer or long integer. + Convert a C :c:type:`Py_ssize_t` to a Python integer or long integer. .. versionadded:: 2.5 ``c`` (string of length 1) [char] - Convert a C :ctype:`int` representing a character to a Python string of + Convert a C :c:type:`int` representing a character to a Python string of length 1. ``d`` (float) [double] - Convert a C :ctype:`double` to a Python floating point number. + Convert a C :c:type:`double` to a Python floating point number. ``f`` (float) [float] Same as ``d``. ``D`` (complex) [Py_complex \*] - Convert a C :ctype:`Py_complex` structure to a Python complex number. + Convert a C :c:type:`Py_complex` structure to a Python complex number. ``O`` (object) [PyObject \*] Pass a Python object untouched (except for its reference count, which is incremented by one). If the object passed in is a *NULL* pointer, it is assumed that this was caused because the call producing the argument - found an error and set an exception. Therefore, :cfunc:`Py_BuildValue` + found an error and set an exception. Therefore, :c:func:`Py_BuildValue` will return *NULL* but won't raise an exception. If no exception has been raised yet, :exc:`SystemError` is set. @@ -539,7 +539,7 @@ and the following format units are left untouched. ``O&`` (object) [*converter*, *anything*] Convert *anything* to a Python object through a *converter* function. The function is called with *anything* (which should be compatible with - :ctype:`void \*`) as its argument and should return a "new" Python + :c:type:`void \*`) as its argument and should return a "new" Python object, or *NULL* if an error occurred. ``(items)`` (tuple) [*matching-items*] @@ -558,7 +558,7 @@ and the following format units are left untouched. If there is an error in the format string, the :exc:`SystemError` exception is set and *NULL* returned. -.. cfunction:: PyObject* Py_VaBuildValue(const char *format, va_list vargs) +.. c:function:: PyObject* Py_VaBuildValue(const char *format, va_list vargs) - Identical to :cfunc:`Py_BuildValue`, except that it accepts a va_list + Identical to :c:func:`Py_BuildValue`, except that it accepts a va_list rather than a variable number of arguments. diff --git a/Doc/c-api/bool.rst b/Doc/c-api/bool.rst index 2bf6e7e..fede348 100644 --- a/Doc/c-api/bool.rst +++ b/Doc/c-api/bool.rst @@ -11,26 +11,26 @@ creation and deletion functions don't apply to booleans. The following macros are available, however. -.. cfunction:: int PyBool_Check(PyObject *o) +.. c:function:: int PyBool_Check(PyObject *o) - Return true if *o* is of type :cdata:`PyBool_Type`. + Return true if *o* is of type :c:data:`PyBool_Type`. .. versionadded:: 2.3 -.. cvar:: PyObject* Py_False +.. c:var:: PyObject* Py_False The Python ``False`` object. This object has no methods. It needs to be treated just like any other object with respect to reference counts. -.. cvar:: PyObject* Py_True +.. c:var:: PyObject* Py_True The Python ``True`` object. This object has no methods. It needs to be treated just like any other object with respect to reference counts. -.. cmacro:: Py_RETURN_FALSE +.. c:macro:: Py_RETURN_FALSE Return :const:`Py_False` from a function, properly incrementing its reference count. @@ -38,7 +38,7 @@ are available, however. .. versionadded:: 2.4 -.. cmacro:: Py_RETURN_TRUE +.. c:macro:: Py_RETURN_TRUE Return :const:`Py_True` from a function, properly incrementing its reference count. @@ -46,7 +46,7 @@ are available, however. .. versionadded:: 2.4 -.. cfunction:: PyObject* PyBool_FromLong(long v) +.. c:function:: PyObject* PyBool_FromLong(long v) Return a new reference to :const:`Py_True` or :const:`Py_False` depending on the truth value of *v*. diff --git a/Doc/c-api/buffer.rst b/Doc/c-api/buffer.rst index 21e8c4a..7b6d1ae 100644 --- a/Doc/c-api/buffer.rst +++ b/Doc/c-api/buffer.rst @@ -27,7 +27,7 @@ should be noted that array elements may be multi-byte values. An example user of the buffer interface is the file object's :meth:`write` method. Any object that can export a series of bytes through the buffer interface can be written to a file. There are a number of format codes to -:cfunc:`PyArg_ParseTuple` that operate against an object's buffer interface, +:c:func:`PyArg_ParseTuple` that operate against an object's buffer interface, returning data from the target object. Starting from version 1.6, Python has been providing Python-level buffer @@ -47,49 +47,49 @@ The new-style Py_buffer struct ============================== -.. ctype:: Py_buffer +.. c:type:: Py_buffer - .. cmember:: void *buf + .. c:member:: void *buf A pointer to the start of the memory for the object. - .. cmember:: Py_ssize_t len + .. c:member:: Py_ssize_t len :noindex: The total length of the memory in bytes. - .. cmember:: int readonly + .. c:member:: int readonly An indicator of whether the buffer is read only. - .. cmember:: const char *format + .. c:member:: const char *format :noindex: A *NULL* terminated string in :mod:`struct` module style syntax giving the contents of the elements available through the buffer. If this is *NULL*, ``"B"`` (unsigned bytes) is assumed. - .. cmember:: int ndim + .. c:member:: int ndim The number of dimensions the memory represents as a multi-dimensional - array. If it is 0, :cdata:`strides` and :cdata:`suboffsets` must be + array. If it is 0, :c:data:`strides` and :c:data:`suboffsets` must be *NULL*. - .. cmember:: Py_ssize_t *shape + .. c:member:: Py_ssize_t *shape - An array of :ctype:`Py_ssize_t`\s the length of :cdata:`ndim` giving the + An array of :c:type:`Py_ssize_t`\s the length of :c:data:`ndim` giving the shape of the memory as a multi-dimensional array. Note that ``((*shape)[0] * ... * (*shape)[ndims-1])*itemsize`` should be equal to - :cdata:`len`. + :c:data:`len`. - .. cmember:: Py_ssize_t *strides + .. c:member:: Py_ssize_t *strides - An array of :ctype:`Py_ssize_t`\s the length of :cdata:`ndim` giving the + An array of :c:type:`Py_ssize_t`\s the length of :c:data:`ndim` giving the number of bytes to skip to get to a new element in each dimension. - .. cmember:: Py_ssize_t *suboffsets + .. c:member:: Py_ssize_t *suboffsets - An array of :ctype:`Py_ssize_t`\s the length of :cdata:`ndim`. If these + An array of :c:type:`Py_ssize_t`\s the length of :c:data:`ndim`. If these suboffset numbers are greater than or equal to 0, then the value stored along the indicated dimension is a pointer and the suboffset value dictates how many bytes to add to the pointer after de-referencing. A @@ -114,16 +114,16 @@ The new-style Py_buffer struct } - .. cmember:: Py_ssize_t itemsize + .. c:member:: Py_ssize_t itemsize This is a storage for the itemsize (in bytes) of each element of the shared memory. It is technically un-necessary as it can be obtained - using :cfunc:`PyBuffer_SizeFromFormat`, however an exporter may know + using :c:func:`PyBuffer_SizeFromFormat`, however an exporter may know this information without parsing the format string and it is necessary to know the itemsize for proper interpretation of striding. Therefore, storing it is more convenient and faster. - .. cmember:: void *internal + .. c:member:: void *internal This is for use internally by the exporting object. For example, this might be re-cast as an integer by the exporter and used to store flags @@ -136,14 +136,14 @@ Buffer related functions ======================== -.. cfunction:: int PyObject_CheckBuffer(PyObject *obj) +.. c:function:: int PyObject_CheckBuffer(PyObject *obj) Return 1 if *obj* supports the buffer interface otherwise 0. -.. cfunction:: int PyObject_GetBuffer(PyObject *obj, Py_buffer *view, int flags) +.. c:function:: int PyObject_GetBuffer(PyObject *obj, Py_buffer *view, int flags) - Export *obj* into a :ctype:`Py_buffer`, *view*. These arguments must + Export *obj* into a :c:type:`Py_buffer`, *view*. These arguments must never be *NULL*. The *flags* argument is a bit field indicating what kind of buffer the caller is prepared to deal with and therefore what kind of buffer the exporter is allowed to return. The buffer interface @@ -156,131 +156,131 @@ Buffer related functions just not possible. These errors should be a :exc:`BufferError` unless there is another error that is actually causing the problem. The exporter can use flags information to simplify how much of the - :cdata:`Py_buffer` structure is filled in with non-default values and/or + :c:data:`Py_buffer` structure is filled in with non-default values and/or raise an error if the object can't support a simpler view of its memory. 0 is returned on success and -1 on error. The following table gives possible values to the *flags* arguments. - +------------------------------+---------------------------------------------------+ - | Flag | Description | - +==============================+===================================================+ - | :cmacro:`PyBUF_SIMPLE` | This is the default flag state. The returned | - | | buffer may or may not have writable memory. The | - | | format of the data will be assumed to be unsigned | - | | bytes. This is a "stand-alone" flag constant. It | - | | never needs to be '|'d to the others. The exporter| - | | will raise an error if it cannot provide such a | - | | contiguous buffer of bytes. | - | | | - +------------------------------+---------------------------------------------------+ - | :cmacro:`PyBUF_WRITABLE` | The returned buffer must be writable. If it is | - | | not writable, then raise an error. | - +------------------------------+---------------------------------------------------+ - | :cmacro:`PyBUF_STRIDES` | This implies :cmacro:`PyBUF_ND`. The returned | - | | buffer must provide strides information (i.e. the | - | | strides cannot be NULL). This would be used when | - | | the consumer can handle strided, discontiguous | - | | arrays. Handling strides automatically assumes | - | | you can handle shape. The exporter can raise an | - | | error if a strided representation of the data is | - | | not possible (i.e. without the suboffsets). | - | | | - +------------------------------+---------------------------------------------------+ - | :cmacro:`PyBUF_ND` | The returned buffer must provide shape | - | | information. The memory will be assumed C-style | - | | contiguous (last dimension varies the | - | | fastest). The exporter may raise an error if it | - | | cannot provide this kind of contiguous buffer. If | - | | this is not given then shape will be *NULL*. | - | | | - | | | - | | | - +------------------------------+---------------------------------------------------+ - |:cmacro:`PyBUF_C_CONTIGUOUS` | These flags indicate that the contiguity returned | - |:cmacro:`PyBUF_F_CONTIGUOUS` | buffer must be respectively, C-contiguous (last | - |:cmacro:`PyBUF_ANY_CONTIGUOUS`| dimension varies the fastest), Fortran contiguous | - | | (first dimension varies the fastest) or either | - | | one. All of these flags imply | - | | :cmacro:`PyBUF_STRIDES` and guarantee that the | - | | strides buffer info structure will be filled in | - | | correctly. | - | | | - +------------------------------+---------------------------------------------------+ - | :cmacro:`PyBUF_INDIRECT` | This flag indicates the returned buffer must have | - | | suboffsets information (which can be NULL if no | - | | suboffsets are needed). This can be used when | - | | the consumer can handle indirect array | - | | referencing implied by these suboffsets. This | - | | implies :cmacro:`PyBUF_STRIDES`. | - | | | - | | | - | | | - +------------------------------+---------------------------------------------------+ - | :cmacro:`PyBUF_FORMAT` | The returned buffer must have true format | - | | information if this flag is provided. This would | - | | be used when the consumer is going to be checking | - | | for what 'kind' of data is actually stored. An | - | | exporter should always be able to provide this | - | | information if requested. If format is not | - | | explicitly requested then the format must be | - | | returned as *NULL* (which means ``'B'``, or | - | | unsigned bytes) | - +------------------------------+---------------------------------------------------+ - | :cmacro:`PyBUF_STRIDED` | This is equivalent to ``(PyBUF_STRIDES | | - | | PyBUF_WRITABLE)``. | - +------------------------------+---------------------------------------------------+ - | :cmacro:`PyBUF_STRIDED_RO` | This is equivalent to ``(PyBUF_STRIDES)``. | - | | | - +------------------------------+---------------------------------------------------+ - | :cmacro:`PyBUF_RECORDS` | This is equivalent to ``(PyBUF_STRIDES | | - | | PyBUF_FORMAT | PyBUF_WRITABLE)``. | - +------------------------------+---------------------------------------------------+ - | :cmacro:`PyBUF_RECORDS_RO` | This is equivalent to ``(PyBUF_STRIDES | | - | | PyBUF_FORMAT)``. | - +------------------------------+---------------------------------------------------+ - | :cmacro:`PyBUF_FULL` | This is equivalent to ``(PyBUF_INDIRECT | | - | | PyBUF_FORMAT | PyBUF_WRITABLE)``. | - +------------------------------+---------------------------------------------------+ - | :cmacro:`PyBUF_FULL_RO` | This is equivalent to ``(PyBUF_INDIRECT | | - | | PyBUF_FORMAT)``. | - +------------------------------+---------------------------------------------------+ - | :cmacro:`PyBUF_CONTIG` | This is equivalent to ``(PyBUF_ND | | - | | PyBUF_WRITABLE)``. | - +------------------------------+---------------------------------------------------+ - | :cmacro:`PyBUF_CONTIG_RO` | This is equivalent to ``(PyBUF_ND)``. | - | | | - +------------------------------+---------------------------------------------------+ - - -.. cfunction:: void PyBuffer_Release(Py_buffer *view) + +-------------------------------+---------------------------------------------------+ + | Flag | Description | + +===============================+===================================================+ + | :c:macro:`PyBUF_SIMPLE` | This is the default flag state. The returned | + | | buffer may or may not have writable memory. The | + | | format of the data will be assumed to be unsigned | + | | bytes. This is a "stand-alone" flag constant. It | + | | never needs to be '|'d to the others. The exporter| + | | will raise an error if it cannot provide such a | + | | contiguous buffer of bytes. | + | | | + +-------------------------------+---------------------------------------------------+ + | :c:macro:`PyBUF_WRITABLE` | The returned buffer must be writable. If it is | + | | not writable, then raise an error. | + +-------------------------------+---------------------------------------------------+ + | :c:macro:`PyBUF_STRIDES` | This implies :c:macro:`PyBUF_ND`. The returned | + | | buffer must provide strides information (i.e. the | + | | strides cannot be NULL). This would be used when | + | | the consumer can handle strided, discontiguous | + | | arrays. Handling strides automatically assumes | + | | you can handle shape. The exporter can raise an | + | | error if a strided representation of the data is | + | | not possible (i.e. without the suboffsets). | + | | | + +-------------------------------+---------------------------------------------------+ + | :c:macro:`PyBUF_ND` | The returned buffer must provide shape | + | | information. The memory will be assumed C-style | + | | contiguous (last dimension varies the | + | | fastest). The exporter may raise an error if it | + | | cannot provide this kind of contiguous buffer. If | + | | this is not given then shape will be *NULL*. | + | | | + | | | + | | | + +-------------------------------+---------------------------------------------------+ + |:c:macro:`PyBUF_C_CONTIGUOUS` | These flags indicate that the contiguity returned | + |:c:macro:`PyBUF_F_CONTIGUOUS` | buffer must be respectively, C-contiguous (last | + |:c:macro:`PyBUF_ANY_CONTIGUOUS`| dimension varies the fastest), Fortran contiguous | + | | (first dimension varies the fastest) or either | + | | one. All of these flags imply | + | | :c:macro:`PyBUF_STRIDES` and guarantee that the | + | | strides buffer info structure will be filled in | + | | correctly. | + | | | + +-------------------------------+---------------------------------------------------+ + | :c:macro:`PyBUF_INDIRECT` | This flag indicates the returned buffer must have | + | | suboffsets information (which can be NULL if no | + | | suboffsets are needed). This can be used when | + | | the consumer can handle indirect array | + | | referencing implied by these suboffsets. This | + | | implies :c:macro:`PyBUF_STRIDES`. | + | | | + | | | + | | | + +-------------------------------+---------------------------------------------------+ + | :c:macro:`PyBUF_FORMAT` | The returned buffer must have true format | + | | information if this flag is provided. This would | + | | be used when the consumer is going to be checking | + | | for what 'kind' of data is actually stored. An | + | | exporter should always be able to provide this | + | | information if requested. If format is not | + | | explicitly requested then the format must be | + | | returned as *NULL* (which means ``'B'``, or | + | | unsigned bytes) | + +-------------------------------+---------------------------------------------------+ + | :c:macro:`PyBUF_STRIDED` | This is equivalent to ``(PyBUF_STRIDES | | + | | PyBUF_WRITABLE)``. | + +-------------------------------+---------------------------------------------------+ + | :c:macro:`PyBUF_STRIDED_RO` | This is equivalent to ``(PyBUF_STRIDES)``. | + | | | + +-------------------------------+---------------------------------------------------+ + | :c:macro:`PyBUF_RECORDS` | This is equivalent to ``(PyBUF_STRIDES | | + | | PyBUF_FORMAT | PyBUF_WRITABLE)``. | + +-------------------------------+---------------------------------------------------+ + | :c:macro:`PyBUF_RECORDS_RO` | This is equivalent to ``(PyBUF_STRIDES | | + | | PyBUF_FORMAT)``. | + +-------------------------------+---------------------------------------------------+ + | :c:macro:`PyBUF_FULL` | This is equivalent to ``(PyBUF_INDIRECT | | + | | PyBUF_FORMAT | PyBUF_WRITABLE)``. | + +-------------------------------+---------------------------------------------------+ + | :c:macro:`PyBUF_FULL_RO` | This is equivalent to ``(PyBUF_INDIRECT | | + | | PyBUF_FORMAT)``. | + +-------------------------------+---------------------------------------------------+ + | :c:macro:`PyBUF_CONTIG` | This is equivalent to ``(PyBUF_ND | | + | | PyBUF_WRITABLE)``. | + +-------------------------------+---------------------------------------------------+ + | :c:macro:`PyBUF_CONTIG_RO` | This is equivalent to ``(PyBUF_ND)``. | + | | | + +-------------------------------+---------------------------------------------------+ + + +.. c:function:: void PyBuffer_Release(Py_buffer *view) Release the buffer *view*. This should be called when the buffer is no longer being used as it may free memory from it. -.. cfunction:: Py_ssize_t PyBuffer_SizeFromFormat(const char *) +.. c:function:: Py_ssize_t PyBuffer_SizeFromFormat(const char *) - Return the implied :cdata:`~Py_buffer.itemsize` from the struct-stype - :cdata:`~Py_buffer.format`. + Return the implied :c:data:`~Py_buffer.itemsize` from the struct-stype + :c:data:`~Py_buffer.format`. -.. cfunction:: int PyBuffer_IsContiguous(Py_buffer *view, char fortran) +.. c:function:: int PyBuffer_IsContiguous(Py_buffer *view, char fortran) Return 1 if the memory defined by the *view* is C-style (*fortran* is ``'C'``) or Fortran-style (*fortran* is ``'F'``) contiguous or either one (*fortran* is ``'A'``). Return 0 otherwise. -.. cfunction:: void PyBuffer_FillContiguousStrides(int ndim, Py_ssize_t *shape, Py_ssize_t *strides, Py_ssize_t itemsize, char fortran) +.. c:function:: void PyBuffer_FillContiguousStrides(int ndim, Py_ssize_t *shape, Py_ssize_t *strides, Py_ssize_t itemsize, char fortran) Fill the *strides* array with byte-strides of a contiguous (C-style if *fortran* is ``'C'`` or Fortran-style if *fortran* is ``'F'``) array of the given shape with the given number of bytes per element. -.. cfunction:: int PyBuffer_FillInfo(Py_buffer *view, PyObject *obj, void *buf, Py_ssize_t len, int readonly, int infoflags) +.. c:function:: int PyBuffer_FillInfo(Py_buffer *view, PyObject *obj, void *buf, Py_ssize_t len, int readonly, int infoflags) Fill in a buffer-info structure, *view*, correctly for an exporter that can only share a contiguous chunk of memory of "unsigned bytes" of the given @@ -295,13 +295,13 @@ MemoryView objects A :class:`memoryview` object exposes the new C level buffer interface as a Python object which can then be passed around like any other object. -.. cfunction:: PyObject *PyMemoryView_FromObject(PyObject *obj) +.. c:function:: PyObject *PyMemoryView_FromObject(PyObject *obj) Create a memoryview object from an object that defines the new buffer interface. -.. cfunction:: PyObject *PyMemoryView_FromBuffer(Py_buffer *view) +.. c:function:: PyObject *PyMemoryView_FromBuffer(Py_buffer *view) Create a memoryview object wrapping the given buffer-info structure *view*. The memoryview object then owns the buffer, which means you shouldn't @@ -309,7 +309,7 @@ Python object which can then be passed around like any other object. memoryview object. -.. cfunction:: PyObject *PyMemoryView_GetContiguous(PyObject *obj, int buffertype, char order) +.. c:function:: PyObject *PyMemoryView_GetContiguous(PyObject *obj, int buffertype, char order) Create a memoryview object to a contiguous chunk of memory (in either 'C' or 'F'ortran *order*) from an object that defines the buffer @@ -318,13 +318,13 @@ Python object which can then be passed around like any other object. new bytes object. -.. cfunction:: int PyMemoryView_Check(PyObject *obj) +.. c:function:: int PyMemoryView_Check(PyObject *obj) Return true if the object *obj* is a memoryview object. It is not currently allowed to create subclasses of :class:`memoryview`. -.. cfunction:: Py_buffer *PyMemoryView_GET_BUFFER(PyObject *obj) +.. c:function:: Py_buffer *PyMemoryView_GET_BUFFER(PyObject *obj) Return a pointer to the buffer-info structure wrapped by the given object. The object **must** be a memoryview instance; this macro doesn't @@ -337,7 +337,7 @@ Old-style buffer objects .. index:: single: PyBufferProcs More information on the old buffer interface is provided in the section -:ref:`buffer-structs`, under the description for :ctype:`PyBufferProcs`. +:ref:`buffer-structs`, under the description for :c:type:`PyBufferProcs`. A "buffer object" is defined in the :file:`bufferobject.h` header (included by :file:`Python.h`). These objects look very similar to string objects at the @@ -356,36 +356,36 @@ system library, or it could be used to pass around structured data in its native, in-memory format. -.. ctype:: PyBufferObject +.. c:type:: PyBufferObject - This subtype of :ctype:`PyObject` represents a buffer object. + This subtype of :c:type:`PyObject` represents a buffer object. -.. cvar:: PyTypeObject PyBuffer_Type +.. c:var:: PyTypeObject PyBuffer_Type .. index:: single: BufferType (in module types) - The instance of :ctype:`PyTypeObject` which represents the Python buffer type; + The instance of :c:type:`PyTypeObject` which represents the Python buffer type; it is the same object as ``buffer`` and ``types.BufferType`` in the Python layer. . -.. cvar:: int Py_END_OF_BUFFER +.. c:var:: int Py_END_OF_BUFFER This constant may be passed as the *size* parameter to - :cfunc:`PyBuffer_FromObject` or :cfunc:`PyBuffer_FromReadWriteObject`. It - indicates that the new :ctype:`PyBufferObject` should refer to *base* + :c:func:`PyBuffer_FromObject` or :c:func:`PyBuffer_FromReadWriteObject`. It + indicates that the new :c:type:`PyBufferObject` should refer to *base* object from the specified *offset* to the end of its exported buffer. Using this enables the caller to avoid querying the *base* object for its length. -.. cfunction:: int PyBuffer_Check(PyObject *p) +.. c:function:: int PyBuffer_Check(PyObject *p) - Return true if the argument has type :cdata:`PyBuffer_Type`. + Return true if the argument has type :c:data:`PyBuffer_Type`. -.. cfunction:: PyObject* PyBuffer_FromObject(PyObject *base, Py_ssize_t offset, Py_ssize_t size) +.. c:function:: PyObject* PyBuffer_FromObject(PyObject *base, Py_ssize_t offset, Py_ssize_t size) Return a new read-only buffer object. This raises :exc:`TypeError` if *base* doesn't support the read-only buffer protocol or doesn't provide @@ -397,24 +397,24 @@ native, in-memory format. length of the *base* object's exported buffer data. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *offset* and *size*. This + This function used an :c:type:`int` type for *offset* and *size*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: PyObject* PyBuffer_FromReadWriteObject(PyObject *base, Py_ssize_t offset, Py_ssize_t size) +.. c:function:: PyObject* PyBuffer_FromReadWriteObject(PyObject *base, Py_ssize_t offset, Py_ssize_t size) Return a new writable buffer object. Parameters and exceptions are similar - to those for :cfunc:`PyBuffer_FromObject`. If the *base* object does not + to those for :c:func:`PyBuffer_FromObject`. If the *base* object does not export the writeable buffer protocol, then :exc:`TypeError` is raised. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *offset* and *size*. This + This function used an :c:type:`int` type for *offset* and *size*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: PyObject* PyBuffer_FromMemory(void *ptr, Py_ssize_t size) +.. c:function:: PyObject* PyBuffer_FromMemory(void *ptr, Py_ssize_t size) Return a new read-only buffer object that reads from a specified location in memory, with a specified size. The caller is responsible for ensuring @@ -424,27 +424,27 @@ native, in-memory format. *size* parameter; :exc:`ValueError` will be raised in that case. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *size*. This might require + This function used an :c:type:`int` type for *size*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: PyObject* PyBuffer_FromReadWriteMemory(void *ptr, Py_ssize_t size) +.. c:function:: PyObject* PyBuffer_FromReadWriteMemory(void *ptr, Py_ssize_t size) - Similar to :cfunc:`PyBuffer_FromMemory`, but the returned buffer is + Similar to :c:func:`PyBuffer_FromMemory`, but the returned buffer is writable. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *size*. This might require + This function used an :c:type:`int` type for *size*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: PyObject* PyBuffer_New(Py_ssize_t size) +.. c:function:: PyObject* PyBuffer_New(Py_ssize_t size) Return a new writable buffer object that maintains its own memory buffer of *size* bytes. :exc:`ValueError` is returned if *size* is not zero or positive. Note that the memory buffer (as returned by - :cfunc:`PyObject_AsWriteBuffer`) is not specifically aligned. + :c:func:`PyObject_AsWriteBuffer`) is not specifically aligned. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *size*. This might require + This function used an :c:type:`int` type for *size*. This might require changes in your code for properly supporting 64-bit systems. diff --git a/Doc/c-api/bytearray.rst b/Doc/c-api/bytearray.rst index a605091..858c8db 100644 --- a/Doc/c-api/bytearray.rst +++ b/Doc/c-api/bytearray.rst @@ -10,26 +10,26 @@ Byte Array Objects .. versionadded:: 2.6 -.. ctype:: PyByteArrayObject +.. c:type:: PyByteArrayObject - This subtype of :ctype:`PyObject` represents a Python bytearray object. + This subtype of :c:type:`PyObject` represents a Python bytearray object. -.. cvar:: PyTypeObject PyByteArray_Type +.. c:var:: PyTypeObject PyByteArray_Type - This instance of :ctype:`PyTypeObject` represents the Python bytearray type; + This instance of :c:type:`PyTypeObject` represents the Python bytearray type; it is the same object as ``bytearray`` in the Python layer. Type check macros ^^^^^^^^^^^^^^^^^ -.. cfunction:: int PyByteArray_Check(PyObject *o) +.. c:function:: int PyByteArray_Check(PyObject *o) Return true if the object *o* is a bytearray object or an instance of a subtype of the bytearray type. -.. cfunction:: int PyByteArray_CheckExact(PyObject *o) +.. c:function:: int PyByteArray_CheckExact(PyObject *o) Return true if the object *o* is a bytearray object, but not an instance of a subtype of the bytearray type. @@ -38,7 +38,7 @@ Type check macros Direct API functions ^^^^^^^^^^^^^^^^^^^^ -.. cfunction:: PyObject* PyByteArray_FromObject(PyObject *o) +.. c:function:: PyObject* PyByteArray_FromObject(PyObject *o) Return a new bytearray object from any object, *o*, that implements the buffer protocol. @@ -46,29 +46,29 @@ Direct API functions .. XXX expand about the buffer protocol, at least somewhere -.. cfunction:: PyObject* PyByteArray_FromStringAndSize(const char *string, Py_ssize_t len) +.. c:function:: PyObject* PyByteArray_FromStringAndSize(const char *string, Py_ssize_t len) Create a new bytearray object from *string* and its length, *len*. On failure, *NULL* is returned. -.. cfunction:: PyObject* PyByteArray_Concat(PyObject *a, PyObject *b) +.. c:function:: PyObject* PyByteArray_Concat(PyObject *a, PyObject *b) Concat bytearrays *a* and *b* and return a new bytearray with the result. -.. cfunction:: Py_ssize_t PyByteArray_Size(PyObject *bytearray) +.. c:function:: Py_ssize_t PyByteArray_Size(PyObject *bytearray) Return the size of *bytearray* after checking for a *NULL* pointer. -.. cfunction:: char* PyByteArray_AsString(PyObject *bytearray) +.. c:function:: char* PyByteArray_AsString(PyObject *bytearray) Return the contents of *bytearray* as a char array after checking for a *NULL* pointer. -.. cfunction:: int PyByteArray_Resize(PyObject *bytearray, Py_ssize_t len) +.. c:function:: int PyByteArray_Resize(PyObject *bytearray, Py_ssize_t len) Resize the internal buffer of *bytearray* to *len*. @@ -77,11 +77,11 @@ Macros These macros trade safety for speed and they don't check pointers. -.. cfunction:: char* PyByteArray_AS_STRING(PyObject *bytearray) +.. c:function:: char* PyByteArray_AS_STRING(PyObject *bytearray) - Macro version of :cfunc:`PyByteArray_AsString`. + Macro version of :c:func:`PyByteArray_AsString`. -.. cfunction:: Py_ssize_t PyByteArray_GET_SIZE(PyObject *bytearray) +.. c:function:: Py_ssize_t PyByteArray_GET_SIZE(PyObject *bytearray) - Macro version of :cfunc:`PyByteArray_Size`. + Macro version of :c:func:`PyByteArray_Size`. diff --git a/Doc/c-api/capsule.rst b/Doc/c-api/capsule.rst index 2939314..6f6250f 100644 --- a/Doc/c-api/capsule.rst +++ b/Doc/c-api/capsule.rst @@ -10,33 +10,33 @@ Capsules Refer to :ref:`using-capsules` for more information on using these objects. -.. ctype:: PyCapsule +.. c:type:: PyCapsule - This subtype of :ctype:`PyObject` represents an opaque value, useful for C - extension modules who need to pass an opaque value (as a :ctype:`void\*` + This subtype of :c:type:`PyObject` represents an opaque value, useful for C + extension modules who need to pass an opaque value (as a :c:type:`void\*` pointer) through Python code to other C code. It is often used to make a C function pointer defined in one module available to other modules, so the regular import mechanism can be used to access C APIs defined in dynamically loaded modules. -.. ctype:: PyCapsule_Destructor +.. c:type:: PyCapsule_Destructor The type of a destructor callback for a capsule. Defined as:: typedef void (*PyCapsule_Destructor)(PyObject *); - See :cfunc:`PyCapsule_New` for the semantics of PyCapsule_Destructor + See :c:func:`PyCapsule_New` for the semantics of PyCapsule_Destructor callbacks. -.. cfunction:: int PyCapsule_CheckExact(PyObject *p) +.. c:function:: int PyCapsule_CheckExact(PyObject *p) - Return true if its argument is a :ctype:`PyCapsule`. + Return true if its argument is a :c:type:`PyCapsule`. -.. cfunction:: PyObject* PyCapsule_New(void *pointer, const char *name, PyCapsule_Destructor destructor) +.. c:function:: PyObject* PyCapsule_New(void *pointer, const char *name, PyCapsule_Destructor destructor) - Create a :ctype:`PyCapsule` encapsulating the *pointer*. The *pointer* + Create a :c:type:`PyCapsule` encapsulating the *pointer*. The *pointer* argument may not be *NULL*. On failure, set an exception and return *NULL*. @@ -50,91 +50,91 @@ Refer to :ref:`using-capsules` for more information on using these objects. If this capsule will be stored as an attribute of a module, the *name* should be specified as ``modulename.attributename``. This will enable other modules - to import the capsule using :cfunc:`PyCapsule_Import`. + to import the capsule using :c:func:`PyCapsule_Import`. -.. cfunction:: void* PyCapsule_GetPointer(PyObject *capsule, const char *name) +.. c:function:: void* PyCapsule_GetPointer(PyObject *capsule, const char *name) Retrieve the *pointer* stored in the capsule. On failure, set an exception and return *NULL*. The *name* parameter must compare exactly to the name stored in the capsule. If the name stored in the capsule is *NULL*, the *name* passed in must also - be *NULL*. Python uses the C function :cfunc:`strcmp` to compare capsule + be *NULL*. Python uses the C function :c:func:`strcmp` to compare capsule names. -.. cfunction:: PyCapsule_Destructor PyCapsule_GetDestructor(PyObject *capsule) +.. c:function:: PyCapsule_Destructor PyCapsule_GetDestructor(PyObject *capsule) Return the current destructor stored in the capsule. On failure, set an exception and return *NULL*. It is legal for a capsule to have a *NULL* destructor. This makes a *NULL* - return code somewhat ambiguous; use :cfunc:`PyCapsule_IsValid` or - :cfunc:`PyErr_Occurred` to disambiguate. + return code somewhat ambiguous; use :c:func:`PyCapsule_IsValid` or + :c:func:`PyErr_Occurred` to disambiguate. -.. cfunction:: void* PyCapsule_GetContext(PyObject *capsule) +.. c:function:: void* PyCapsule_GetContext(PyObject *capsule) Return the current context stored in the capsule. On failure, set an exception and return *NULL*. It is legal for a capsule to have a *NULL* context. This makes a *NULL* - return code somewhat ambiguous; use :cfunc:`PyCapsule_IsValid` or - :cfunc:`PyErr_Occurred` to disambiguate. + return code somewhat ambiguous; use :c:func:`PyCapsule_IsValid` or + :c:func:`PyErr_Occurred` to disambiguate. -.. cfunction:: const char* PyCapsule_GetName(PyObject *capsule) +.. c:function:: const char* PyCapsule_GetName(PyObject *capsule) Return the current name stored in the capsule. On failure, set an exception and return *NULL*. It is legal for a capsule to have a *NULL* name. This makes a *NULL* return - code somewhat ambiguous; use :cfunc:`PyCapsule_IsValid` or - :cfunc:`PyErr_Occurred` to disambiguate. + code somewhat ambiguous; use :c:func:`PyCapsule_IsValid` or + :c:func:`PyErr_Occurred` to disambiguate. -.. cfunction:: void* PyCapsule_Import(const char *name, int no_block) +.. c:function:: void* PyCapsule_Import(const char *name, int no_block) Import a pointer to a C object from a capsule attribute in a module. The *name* parameter should specify the full name to the attribute, as in ``module.attribute``. The *name* stored in the capsule must match this string exactly. If *no_block* is true, import the module without blocking - (using :cfunc:`PyImport_ImportModuleNoBlock`). If *no_block* is false, - import the module conventionally (using :cfunc:`PyImport_ImportModule`). + (using :c:func:`PyImport_ImportModuleNoBlock`). If *no_block* is false, + import the module conventionally (using :c:func:`PyImport_ImportModule`). Return the capsule's internal *pointer* on success. On failure, set an - exception and return *NULL*. However, if :cfunc:`PyCapsule_Import` failed to + exception and return *NULL*. However, if :c:func:`PyCapsule_Import` failed to import the module, and *no_block* was true, no exception is set. -.. cfunction:: int PyCapsule_IsValid(PyObject *capsule, const char *name) +.. c:function:: int PyCapsule_IsValid(PyObject *capsule, const char *name) Determines whether or not *capsule* is a valid capsule. A valid capsule is - non-*NULL*, passes :cfunc:`PyCapsule_CheckExact`, has a non-*NULL* pointer + non-*NULL*, passes :c:func:`PyCapsule_CheckExact`, has a non-*NULL* pointer stored in it, and its internal name matches the *name* parameter. (See - :cfunc:`PyCapsule_GetPointer` for information on how capsule names are + :c:func:`PyCapsule_GetPointer` for information on how capsule names are compared.) - In other words, if :cfunc:`PyCapsule_IsValid` returns a true value, calls to - any of the accessors (any function starting with :cfunc:`PyCapsule_Get`) are + In other words, if :c:func:`PyCapsule_IsValid` returns a true value, calls to + any of the accessors (any function starting with :c:func:`PyCapsule_Get`) are guaranteed to succeed. Return a nonzero value if the object is valid and matches the name passed in. Return 0 otherwise. This function will not fail. -.. cfunction:: int PyCapsule_SetContext(PyObject *capsule, void *context) +.. c:function:: int PyCapsule_SetContext(PyObject *capsule, void *context) Set the context pointer inside *capsule* to *context*. Return 0 on success. Return nonzero and set an exception on failure. -.. cfunction:: int PyCapsule_SetDestructor(PyObject *capsule, PyCapsule_Destructor destructor) +.. c:function:: int PyCapsule_SetDestructor(PyObject *capsule, PyCapsule_Destructor destructor) Set the destructor inside *capsule* to *destructor*. Return 0 on success. Return nonzero and set an exception on failure. -.. cfunction:: int PyCapsule_SetName(PyObject *capsule, const char *name) +.. c:function:: int PyCapsule_SetName(PyObject *capsule, const char *name) Set the name inside *capsule* to *name*. If non-*NULL*, the name must outlive the capsule. If the previous *name* stored in the capsule was not @@ -142,7 +142,7 @@ Refer to :ref:`using-capsules` for more information on using these objects. Return 0 on success. Return nonzero and set an exception on failure. -.. cfunction:: int PyCapsule_SetPointer(PyObject *capsule, void *pointer) +.. c:function:: int PyCapsule_SetPointer(PyObject *capsule, void *pointer) Set the void pointer inside *capsule* to *pointer*. The pointer may not be *NULL*. diff --git a/Doc/c-api/cell.rst b/Doc/c-api/cell.rst index 3562ed9..427259c 100644 --- a/Doc/c-api/cell.rst +++ b/Doc/c-api/cell.rst @@ -15,39 +15,39 @@ generated byte-code; these are not automatically de-referenced when accessed. Cell objects are not likely to be useful elsewhere. -.. ctype:: PyCellObject +.. c:type:: PyCellObject The C structure used for cell objects. -.. cvar:: PyTypeObject PyCell_Type +.. c:var:: PyTypeObject PyCell_Type The type object corresponding to cell objects. -.. cfunction:: int PyCell_Check(ob) +.. c:function:: int PyCell_Check(ob) Return true if *ob* is a cell object; *ob* must not be *NULL*. -.. cfunction:: PyObject* PyCell_New(PyObject *ob) +.. c:function:: PyObject* PyCell_New(PyObject *ob) Create and return a new cell object containing the value *ob*. The parameter may be *NULL*. -.. cfunction:: PyObject* PyCell_Get(PyObject *cell) +.. c:function:: PyObject* PyCell_Get(PyObject *cell) Return the contents of the cell *cell*. -.. cfunction:: PyObject* PyCell_GET(PyObject *cell) +.. c:function:: PyObject* PyCell_GET(PyObject *cell) Return the contents of the cell *cell*, but without checking that *cell* is non-*NULL* and a cell object. -.. cfunction:: int PyCell_Set(PyObject *cell, PyObject *value) +.. c:function:: int PyCell_Set(PyObject *cell, PyObject *value) Set the contents of the cell object *cell* to *value*. This releases the reference to any current content of the cell. *value* may be *NULL*. *cell* @@ -55,7 +55,7 @@ Cell objects are not likely to be useful elsewhere. success, ``0`` will be returned. -.. cfunction:: void PyCell_SET(PyObject *cell, PyObject *value) +.. c:function:: void PyCell_SET(PyObject *cell, PyObject *value) Sets the value of the cell object *cell* to *value*. No reference counts are adjusted, and no checks are made for safety; *cell* must be non-*NULL* and must diff --git a/Doc/c-api/class.rst b/Doc/c-api/class.rst index 576af38..4dbe508 100644 --- a/Doc/c-api/class.rst +++ b/Doc/c-api/class.rst @@ -12,12 +12,12 @@ will go away in Python 3. When creating new types for extension modules, you will want to work with type objects (section :ref:`typeobjects`). -.. ctype:: PyClassObject +.. c:type:: PyClassObject The C structure of the objects used to describe built-in classes. -.. cvar:: PyObject* PyClass_Type +.. c:var:: PyObject* PyClass_Type .. index:: single: ClassType (in module types) @@ -25,13 +25,13 @@ will want to work with type objects (section :ref:`typeobjects`). ``types.ClassType`` in the Python layer. -.. cfunction:: int PyClass_Check(PyObject *o) +.. c:function:: int PyClass_Check(PyObject *o) Return true if the object *o* is a class object, including instances of types derived from the standard class object. Return false in all other cases. -.. cfunction:: int PyClass_IsSubclass(PyObject *klass, PyObject *base) +.. c:function:: int PyClass_IsSubclass(PyObject *klass, PyObject *base) Return true if *klass* is a subclass of *base*. Return false in all other cases. @@ -41,23 +41,23 @@ will want to work with type objects (section :ref:`typeobjects`). There are very few functions specific to instance objects. -.. cvar:: PyTypeObject PyInstance_Type +.. c:var:: PyTypeObject PyInstance_Type Type object for class instances. -.. cfunction:: int PyInstance_Check(PyObject *obj) +.. c:function:: int PyInstance_Check(PyObject *obj) Return true if *obj* is an instance. -.. cfunction:: PyObject* PyInstance_New(PyObject *class, PyObject *arg, PyObject *kw) +.. c:function:: PyObject* PyInstance_New(PyObject *class, PyObject *arg, PyObject *kw) Create a new instance of a specific class. The parameters *arg* and *kw* are used as the positional and keyword parameters to the object's constructor. -.. cfunction:: PyObject* PyInstance_NewRaw(PyObject *class, PyObject *dict) +.. c:function:: PyObject* PyInstance_NewRaw(PyObject *class, PyObject *dict) Create a new instance of a specific class without calling its constructor. *class* is the class of new object. The *dict* parameter will be used as the diff --git a/Doc/c-api/cobject.rst b/Doc/c-api/cobject.rst index 73fbbf5..eafac0e 100644 --- a/Doc/c-api/cobject.rst +++ b/Doc/c-api/cobject.rst @@ -13,47 +13,47 @@ CObjects The CObject API is deprecated as of Python 2.7. Please switch to the new :ref:`capsules` API. -.. ctype:: PyCObject +.. c:type:: PyCObject - This subtype of :ctype:`PyObject` represents an opaque value, useful for C - extension modules who need to pass an opaque value (as a :ctype:`void\*` + This subtype of :c:type:`PyObject` represents an opaque value, useful for C + extension modules who need to pass an opaque value (as a :c:type:`void\*` pointer) through Python code to other C code. It is often used to make a C function pointer defined in one module available to other modules, so the regular import mechanism can be used to access C APIs defined in dynamically loaded modules. -.. cfunction:: int PyCObject_Check(PyObject *p) +.. c:function:: int PyCObject_Check(PyObject *p) - Return true if its argument is a :ctype:`PyCObject`. + Return true if its argument is a :c:type:`PyCObject`. -.. cfunction:: PyObject* PyCObject_FromVoidPtr(void* cobj, void (*destr)(void *)) +.. c:function:: PyObject* PyCObject_FromVoidPtr(void* cobj, void (*destr)(void *)) - Create a :ctype:`PyCObject` from the ``void *`` *cobj*. The *destr* function + Create a :c:type:`PyCObject` from the ``void *`` *cobj*. The *destr* function will be called when the object is reclaimed, unless it is *NULL*. -.. cfunction:: PyObject* PyCObject_FromVoidPtrAndDesc(void* cobj, void* desc, void (*destr)(void *, void *)) +.. c:function:: PyObject* PyCObject_FromVoidPtrAndDesc(void* cobj, void* desc, void (*destr)(void *, void *)) - Create a :ctype:`PyCObject` from the :ctype:`void \*` *cobj*. The *destr* + Create a :c:type:`PyCObject` from the :c:type:`void \*` *cobj*. The *destr* function will be called when the object is reclaimed. The *desc* argument can be used to pass extra callback data for the destructor function. -.. cfunction:: void* PyCObject_AsVoidPtr(PyObject* self) +.. c:function:: void* PyCObject_AsVoidPtr(PyObject* self) - Return the object :ctype:`void \*` that the :ctype:`PyCObject` *self* was + Return the object :c:type:`void \*` that the :c:type:`PyCObject` *self* was created with. -.. cfunction:: void* PyCObject_GetDesc(PyObject* self) +.. c:function:: void* PyCObject_GetDesc(PyObject* self) - Return the description :ctype:`void \*` that the :ctype:`PyCObject` *self* was + Return the description :c:type:`void \*` that the :c:type:`PyCObject` *self* was created with. -.. cfunction:: int PyCObject_SetVoidPtr(PyObject* self, void* cobj) +.. c:function:: int PyCObject_SetVoidPtr(PyObject* self, void* cobj) - Set the void pointer inside *self* to *cobj*. The :ctype:`PyCObject` must not + Set the void pointer inside *self* to *cobj*. The :c:type:`PyCObject` must not have an associated destructor. Return true on success, false on failure. diff --git a/Doc/c-api/code.rst b/Doc/c-api/code.rst index c6ca8c5..7d9b4b6 100644 --- a/Doc/c-api/code.rst +++ b/Doc/c-api/code.rst @@ -15,35 +15,35 @@ Code objects are a low-level detail of the CPython implementation. Each one represents a chunk of executable code that hasn't yet been bound into a function. -.. ctype:: PyCodeObject +.. c:type:: PyCodeObject The C structure of the objects used to describe code objects. The fields of this type are subject to change at any time. -.. cvar:: PyTypeObject PyCode_Type +.. c:var:: PyTypeObject PyCode_Type - This is an instance of :ctype:`PyTypeObject` representing the Python + This is an instance of :c:type:`PyTypeObject` representing the Python :class:`code` type. -.. cfunction:: int PyCode_Check(PyObject *co) +.. c:function:: int PyCode_Check(PyObject *co) Return true if *co* is a :class:`code` object -.. cfunction:: int PyCode_GetNumFree(PyObject *co) +.. c:function:: int PyCode_GetNumFree(PyObject *co) Return the number of free variables in *co*. -.. cfunction:: PyCodeObject *PyCode_New(int argcount, int nlocals, int stacksize, int flags, PyObject *code, PyObject *consts, PyObject *names, PyObject *varnames, PyObject *freevars, PyObject *cellvars, PyObject *filename, PyObject *name, int firstlineno, PyObject *lnotab) +.. c:function:: PyCodeObject *PyCode_New(int argcount, int nlocals, int stacksize, int flags, PyObject *code, PyObject *consts, PyObject *names, PyObject *varnames, PyObject *freevars, PyObject *cellvars, PyObject *filename, PyObject *name, int firstlineno, PyObject *lnotab) Return a new code object. If you need a dummy code object to - create a frame, use :cfunc:`PyCode_NewEmpty` instead. Calling - :cfunc:`PyCode_New` directly can bind you to a precise Python + create a frame, use :c:func:`PyCode_NewEmpty` instead. Calling + :c:func:`PyCode_New` directly can bind you to a precise Python version since the definition of the bytecode changes often. -.. cfunction:: int PyCode_NewEmpty(const char *filename, const char *funcname, int firstlineno) +.. c:function:: int PyCode_NewEmpty(const char *filename, const char *funcname, int firstlineno) Return a new empty code object with the specified filename, function name, and first line number. It is illegal to diff --git a/Doc/c-api/codec.rst b/Doc/c-api/codec.rst index 2597d38..8207ae0 100644 --- a/Doc/c-api/codec.rst +++ b/Doc/c-api/codec.rst @@ -3,19 +3,19 @@ Codec registry and support functions ==================================== -.. cfunction:: int PyCodec_Register(PyObject *search_function) +.. c:function:: int PyCodec_Register(PyObject *search_function) Register a new codec search function. As side effect, this tries to load the :mod:`encodings` package, if not yet done, to make sure that it is always first in the list of search functions. -.. cfunction:: int PyCodec_KnownEncoding(const char *encoding) +.. c:function:: int PyCodec_KnownEncoding(const char *encoding) Return ``1`` or ``0`` depending on whether there is a registered codec for the given *encoding*. -.. cfunction:: PyObject* PyCodec_Encode(PyObject *object, const char *encoding, const char *errors) +.. c:function:: PyObject* PyCodec_Encode(PyObject *object, const char *encoding, const char *errors) Generic codec based encoding API. @@ -24,7 +24,7 @@ Codec registry and support functions be *NULL* to use the default method defined for the codec. Raises a :exc:`LookupError` if no encoder can be found. -.. cfunction:: PyObject* PyCodec_Decode(PyObject *object, const char *encoding, const char *errors) +.. c:function:: PyObject* PyCodec_Decode(PyObject *object, const char *encoding, const char *errors) Generic codec based decoding API. @@ -42,27 +42,27 @@ lower-case characters, which makes encodings looked up through this mechanism effectively case-insensitive. If no codec is found, a :exc:`KeyError` is set and *NULL* returned. -.. cfunction:: PyObject* PyCodec_Encoder(const char *encoding) +.. c:function:: PyObject* PyCodec_Encoder(const char *encoding) Get an encoder function for the given *encoding*. -.. cfunction:: PyObject* PyCodec_Decoder(const char *encoding) +.. c:function:: PyObject* PyCodec_Decoder(const char *encoding) Get a decoder function for the given *encoding*. -.. cfunction:: PyObject* PyCodec_IncrementalEncoder(const char *encoding, const char *errors) +.. c:function:: PyObject* PyCodec_IncrementalEncoder(const char *encoding, const char *errors) Get an :class:`IncrementalEncoder` object for the given *encoding*. -.. cfunction:: PyObject* PyCodec_IncrementalDecoder(const char *encoding, const char *errors) +.. c:function:: PyObject* PyCodec_IncrementalDecoder(const char *encoding, const char *errors) Get an :class:`IncrementalDecoder` object for the given *encoding*. -.. cfunction:: PyObject* PyCodec_StreamReader(const char *encoding, PyObject *stream, const char *errors) +.. c:function:: PyObject* PyCodec_StreamReader(const char *encoding, PyObject *stream, const char *errors) Get a :class:`StreamReader` factory function for the given *encoding*. -.. cfunction:: PyObject* PyCodec_StreamWriter(const char *encoding, PyObject *stream, const char *errors) +.. c:function:: PyObject* PyCodec_StreamWriter(const char *encoding, PyObject *stream, const char *errors) Get a :class:`StreamWriter` factory function for the given *encoding*. @@ -70,7 +70,7 @@ and *NULL* returned. Registry API for Unicode encoding error handlers ------------------------------------------------ -.. cfunction:: int PyCodec_RegisterError(const char *name, PyObject *error) +.. c:function:: int PyCodec_RegisterError(const char *name, PyObject *error) Register the error handling callback function *error* under the given *name*. This callback function will be called by a codec when it encounters @@ -89,29 +89,29 @@ Registry API for Unicode encoding error handlers Return ``0`` on success, ``-1`` on error. -.. cfunction:: PyObject* PyCodec_LookupError(const char *name) +.. c:function:: PyObject* PyCodec_LookupError(const char *name) Lookup the error handling callback function registered under *name*. As a special case *NULL* can be passed, in which case the error handling callback for "strict" will be returned. -.. cfunction:: PyObject* PyCodec_StrictErrors(PyObject *exc) +.. c:function:: PyObject* PyCodec_StrictErrors(PyObject *exc) Raise *exc* as an exception. -.. cfunction:: PyObject* PyCodec_IgnoreErrors(PyObject *exc) +.. c:function:: PyObject* PyCodec_IgnoreErrors(PyObject *exc) Ignore the unicode error, skipping the faulty input. -.. cfunction:: PyObject* PyCodec_ReplaceErrors(PyObject *exc) +.. c:function:: PyObject* PyCodec_ReplaceErrors(PyObject *exc) Replace the unicode encode error with ``?`` or ``U+FFFD``. -.. cfunction:: PyObject* PyCodec_XMLCharRefReplaceErrors(PyObject *exc) +.. c:function:: PyObject* PyCodec_XMLCharRefReplaceErrors(PyObject *exc) Replace the unicode encode error with XML character references. -.. cfunction:: PyObject* PyCodec_BackslashReplaceErrors(PyObject *exc) +.. c:function:: PyObject* PyCodec_BackslashReplaceErrors(PyObject *exc) Replace the unicode encode error with backslash escapes (``\x``, ``\u`` and ``\U``). diff --git a/Doc/c-api/complex.rst b/Doc/c-api/complex.rst index 90e9c03..2547c1c 100644 --- a/Doc/c-api/complex.rst +++ b/Doc/c-api/complex.rst @@ -21,7 +21,7 @@ them as results do so *by value* rather than dereferencing them through pointers. This is consistent throughout the API. -.. ctype:: Py_complex +.. c:type:: Py_complex The C structure which corresponds to the value portion of a Python complex number object. Most of the functions for dealing with complex number objects @@ -34,103 +34,103 @@ pointers. This is consistent throughout the API. } Py_complex; -.. cfunction:: Py_complex _Py_c_sum(Py_complex left, Py_complex right) +.. c:function:: Py_complex _Py_c_sum(Py_complex left, Py_complex right) - Return the sum of two complex numbers, using the C :ctype:`Py_complex` + Return the sum of two complex numbers, using the C :c:type:`Py_complex` representation. -.. cfunction:: Py_complex _Py_c_diff(Py_complex left, Py_complex right) +.. c:function:: Py_complex _Py_c_diff(Py_complex left, Py_complex right) Return the difference between two complex numbers, using the C - :ctype:`Py_complex` representation. + :c:type:`Py_complex` representation. -.. cfunction:: Py_complex _Py_c_neg(Py_complex complex) +.. c:function:: Py_complex _Py_c_neg(Py_complex complex) Return the negation of the complex number *complex*, using the C - :ctype:`Py_complex` representation. + :c:type:`Py_complex` representation. -.. cfunction:: Py_complex _Py_c_prod(Py_complex left, Py_complex right) +.. c:function:: Py_complex _Py_c_prod(Py_complex left, Py_complex right) - Return the product of two complex numbers, using the C :ctype:`Py_complex` + Return the product of two complex numbers, using the C :c:type:`Py_complex` representation. -.. cfunction:: Py_complex _Py_c_quot(Py_complex dividend, Py_complex divisor) +.. c:function:: Py_complex _Py_c_quot(Py_complex dividend, Py_complex divisor) - Return the quotient of two complex numbers, using the C :ctype:`Py_complex` + Return the quotient of two complex numbers, using the C :c:type:`Py_complex` representation. If *divisor* is null, this method returns zero and sets - :cdata:`errno` to :cdata:`EDOM`. + :c:data:`errno` to :c:data:`EDOM`. -.. cfunction:: Py_complex _Py_c_pow(Py_complex num, Py_complex exp) +.. c:function:: Py_complex _Py_c_pow(Py_complex num, Py_complex exp) - Return the exponentiation of *num* by *exp*, using the C :ctype:`Py_complex` + Return the exponentiation of *num* by *exp*, using the C :c:type:`Py_complex` representation. If *num* is null and *exp* is not a positive real number, - this method returns zero and sets :cdata:`errno` to :cdata:`EDOM`. + this method returns zero and sets :c:data:`errno` to :c:data:`EDOM`. Complex Numbers as Python Objects ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -.. ctype:: PyComplexObject +.. c:type:: PyComplexObject - This subtype of :ctype:`PyObject` represents a Python complex number object. + This subtype of :c:type:`PyObject` represents a Python complex number object. -.. cvar:: PyTypeObject PyComplex_Type +.. c:var:: PyTypeObject PyComplex_Type - This instance of :ctype:`PyTypeObject` represents the Python complex number + This instance of :c:type:`PyTypeObject` represents the Python complex number type. It is the same object as ``complex`` and ``types.ComplexType``. -.. cfunction:: int PyComplex_Check(PyObject *p) +.. c:function:: int PyComplex_Check(PyObject *p) - Return true if its argument is a :ctype:`PyComplexObject` or a subtype of - :ctype:`PyComplexObject`. + Return true if its argument is a :c:type:`PyComplexObject` or a subtype of + :c:type:`PyComplexObject`. .. versionchanged:: 2.2 Allowed subtypes to be accepted. -.. cfunction:: int PyComplex_CheckExact(PyObject *p) +.. c:function:: int PyComplex_CheckExact(PyObject *p) - Return true if its argument is a :ctype:`PyComplexObject`, but not a subtype of - :ctype:`PyComplexObject`. + Return true if its argument is a :c:type:`PyComplexObject`, but not a subtype of + :c:type:`PyComplexObject`. .. versionadded:: 2.2 -.. cfunction:: PyObject* PyComplex_FromCComplex(Py_complex v) +.. c:function:: PyObject* PyComplex_FromCComplex(Py_complex v) - Create a new Python complex number object from a C :ctype:`Py_complex` value. + Create a new Python complex number object from a C :c:type:`Py_complex` value. -.. cfunction:: PyObject* PyComplex_FromDoubles(double real, double imag) +.. c:function:: PyObject* PyComplex_FromDoubles(double real, double imag) - Return a new :ctype:`PyComplexObject` object from *real* and *imag*. + Return a new :c:type:`PyComplexObject` object from *real* and *imag*. -.. cfunction:: double PyComplex_RealAsDouble(PyObject *op) +.. c:function:: double PyComplex_RealAsDouble(PyObject *op) - Return the real part of *op* as a C :ctype:`double`. + Return the real part of *op* as a C :c:type:`double`. -.. cfunction:: double PyComplex_ImagAsDouble(PyObject *op) +.. c:function:: double PyComplex_ImagAsDouble(PyObject *op) - Return the imaginary part of *op* as a C :ctype:`double`. + Return the imaginary part of *op* as a C :c:type:`double`. -.. cfunction:: Py_complex PyComplex_AsCComplex(PyObject *op) +.. c:function:: Py_complex PyComplex_AsCComplex(PyObject *op) - Return the :ctype:`Py_complex` value of the complex number *op*. + Return the :c:type:`Py_complex` value of the complex number *op*. Upon failure, this method returns ``-1.0`` as a real value. .. versionchanged:: 2.6 diff --git a/Doc/c-api/concrete.rst b/Doc/c-api/concrete.rst index 5ee611b..30eb78d 100644 --- a/Doc/c-api/concrete.rst +++ b/Doc/c-api/concrete.rst @@ -11,7 +11,7 @@ The functions in this chapter are specific to certain Python object types. Passing them an object of the wrong type is not a good idea; if you receive an object from a Python program and you are not sure that it has the right type, you must perform a type check first; for example, to check that an object is a -dictionary, use :cfunc:`PyDict_Check`. The chapter is structured like the +dictionary, use :c:func:`PyDict_Check`. The chapter is structured like the "family tree" of Python object types. .. warning:: diff --git a/Doc/c-api/conversion.rst b/Doc/c-api/conversion.rst index b32100b..b987469 100644 --- a/Doc/c-api/conversion.rst +++ b/Doc/c-api/conversion.rst @@ -8,20 +8,20 @@ String conversion and formatting Functions for number conversion and formatted string output. -.. cfunction:: int PyOS_snprintf(char *str, size_t size, const char *format, ...) +.. c:function:: int PyOS_snprintf(char *str, size_t size, const char *format, ...) Output not more than *size* bytes to *str* according to the format string *format* and the extra arguments. See the Unix man page :manpage:`snprintf(2)`. -.. cfunction:: int PyOS_vsnprintf(char *str, size_t size, const char *format, va_list va) +.. c:function:: int PyOS_vsnprintf(char *str, size_t size, const char *format, va_list va) Output not more than *size* bytes to *str* according to the format string *format* and the variable argument list *va*. Unix man page :manpage:`vsnprintf(2)`. -:cfunc:`PyOS_snprintf` and :cfunc:`PyOS_vsnprintf` wrap the Standard C library -functions :cfunc:`snprintf` and :cfunc:`vsnprintf`. Their purpose is to +:c:func:`PyOS_snprintf` and :c:func:`PyOS_vsnprintf` wrap the Standard C library +functions :c:func:`snprintf` and :c:func:`vsnprintf`. Their purpose is to guarantee consistent behavior in corner cases, which the Standard C functions do not. @@ -30,7 +30,7 @@ never write more than *size* bytes (including the trailing ``'\0'`` into str. Both functions require that ``str != NULL``, ``size > 0`` and ``format != NULL``. -If the platform doesn't have :cfunc:`vsnprintf` and the buffer size needed to +If the platform doesn't have :c:func:`vsnprintf` and the buffer size needed to avoid truncation exceeds *size* by more than 512 bytes, Python aborts with a *Py_FatalError*. @@ -51,9 +51,9 @@ The return value (*rv*) for these functions should be interpreted as follows: The following functions provide locale-independent string to number conversions. -.. cfunction:: double PyOS_string_to_double(const char *s, char **endptr, PyObject *overflow_exception) +.. c:function:: double PyOS_string_to_double(const char *s, char **endptr, PyObject *overflow_exception) - Convert a string ``s`` to a :ctype:`double`, raising a Python + Convert a string ``s`` to a :c:type:`double`, raising a Python exception on failure. The set of accepted strings corresponds to the set of strings accepted by Python's :func:`float` constructor, except that ``s`` must not have leading or trailing whitespace. @@ -85,13 +85,13 @@ The following functions provide locale-independent string to number conversions. .. versionadded:: 2.7 -.. cfunction:: double PyOS_ascii_strtod(const char *nptr, char **endptr) +.. c:function:: double PyOS_ascii_strtod(const char *nptr, char **endptr) - Convert a string to a :ctype:`double`. This function behaves like the Standard C - function :cfunc:`strtod` does in the C locale. It does this without changing the + Convert a string to a :c:type:`double`. This function behaves like the Standard C + function :c:func:`strtod` does in the C locale. It does this without changing the current locale, since that would not be thread-safe. - :cfunc:`PyOS_ascii_strtod` should typically be used for reading configuration + :c:func:`PyOS_ascii_strtod` should typically be used for reading configuration files or other non-user input that should be locale independent. See the Unix man page :manpage:`strtod(2)` for details. @@ -99,14 +99,14 @@ The following functions provide locale-independent string to number conversions. .. versionadded:: 2.4 .. deprecated:: 2.7 - Use :cfunc:`PyOS_string_to_double` instead. + Use :c:func:`PyOS_string_to_double` instead. -.. cfunction:: char* PyOS_ascii_formatd(char *buffer, size_t buf_len, const char *format, double d) +.. c:function:: char* PyOS_ascii_formatd(char *buffer, size_t buf_len, const char *format, double d) - Convert a :ctype:`double` to a string using the ``'.'`` as the decimal - separator. *format* is a :cfunc:`printf`\ -style format string specifying the + Convert a :c:type:`double` to a string using the ``'.'`` as the decimal + separator. *format* is a :c:func:`printf`\ -style format string specifying the number format. Allowed conversion characters are ``'e'``, ``'E'``, ``'f'``, ``'F'``, ``'g'`` and ``'G'``. @@ -119,9 +119,9 @@ The following functions provide locale-independent string to number conversions. instead. -.. cfunction:: char* PyOS_double_to_string(double val, char format_code, int precision, int flags, int *ptype) +.. c:function:: char* PyOS_double_to_string(double val, char format_code, int precision, int flags, int *ptype) - Convert a :ctype:`double` *val* to a string using supplied + Convert a :c:type:`double` *val* to a string using supplied *format_code*, *precision*, and *flags*. *format_code* must be one of ``'e'``, ``'E'``, ``'f'``, ``'F'``, @@ -139,7 +139,7 @@ The following functions provide locale-independent string to number conversions. like an integer. * *Py_DTSF_ALT* means to apply "alternate" formatting rules. See the - documentation for the :cfunc:`PyOS_snprintf` ``'#'`` specifier for + documentation for the :c:func:`PyOS_snprintf` ``'#'`` specifier for details. If *ptype* is non-NULL, then the value it points to will be set to one of @@ -148,34 +148,34 @@ The following functions provide locale-independent string to number conversions. The return value is a pointer to *buffer* with the converted string or *NULL* if the conversion failed. The caller is responsible for freeing the - returned string by calling :cfunc:`PyMem_Free`. + returned string by calling :c:func:`PyMem_Free`. .. versionadded:: 2.7 -.. cfunction:: double PyOS_ascii_atof(const char *nptr) +.. c:function:: double PyOS_ascii_atof(const char *nptr) - Convert a string to a :ctype:`double` in a locale-independent way. + Convert a string to a :c:type:`double` in a locale-independent way. See the Unix man page :manpage:`atof(2)` for details. .. versionadded:: 2.4 .. deprecated:: 3.1 - Use :cfunc:`PyOS_string_to_double` instead. + Use :c:func:`PyOS_string_to_double` instead. -.. cfunction:: char* PyOS_stricmp(char *s1, char *s2) +.. c:function:: char* PyOS_stricmp(char *s1, char *s2) Case insensitive comparison of strings. The function works almost - identically to :cfunc:`strcmp` except that it ignores the case. + identically to :c:func:`strcmp` except that it ignores the case. .. versionadded:: 2.6 -.. cfunction:: char* PyOS_strnicmp(char *s1, char *s2, Py_ssize_t size) +.. c:function:: char* PyOS_strnicmp(char *s1, char *s2, Py_ssize_t size) Case insensitive comparison of strings. The function works almost - identically to :cfunc:`strncmp` except that it ignores the case. + identically to :c:func:`strncmp` except that it ignores the case. .. versionadded:: 2.6 diff --git a/Doc/c-api/datetime.rst b/Doc/c-api/datetime.rst index 0e9b376..e2d832c 100644 --- a/Doc/c-api/datetime.rst +++ b/Doc/c-api/datetime.rst @@ -8,89 +8,89 @@ DateTime Objects Various date and time objects are supplied by the :mod:`datetime` module. Before using any of these functions, the header file :file:`datetime.h` must be included in your source (note that this is not included by :file:`Python.h`), -and the macro :cmacro:`PyDateTime_IMPORT` must be invoked, usually as part of +and the macro :c:macro:`PyDateTime_IMPORT` must be invoked, usually as part of the module initialisation function. The macro puts a pointer to a C structure -into a static variable, :cdata:`PyDateTimeAPI`, that is used by the following +into a static variable, :c:data:`PyDateTimeAPI`, that is used by the following macros. Type-check macros: -.. cfunction:: int PyDate_Check(PyObject *ob) +.. c:function:: int PyDate_Check(PyObject *ob) - Return true if *ob* is of type :cdata:`PyDateTime_DateType` or a subtype of - :cdata:`PyDateTime_DateType`. *ob* must not be *NULL*. + Return true if *ob* is of type :c:data:`PyDateTime_DateType` or a subtype of + :c:data:`PyDateTime_DateType`. *ob* must not be *NULL*. .. versionadded:: 2.4 -.. cfunction:: int PyDate_CheckExact(PyObject *ob) +.. c:function:: int PyDate_CheckExact(PyObject *ob) - Return true if *ob* is of type :cdata:`PyDateTime_DateType`. *ob* must not be + Return true if *ob* is of type :c:data:`PyDateTime_DateType`. *ob* must not be *NULL*. .. versionadded:: 2.4 -.. cfunction:: int PyDateTime_Check(PyObject *ob) +.. c:function:: int PyDateTime_Check(PyObject *ob) - Return true if *ob* is of type :cdata:`PyDateTime_DateTimeType` or a subtype of - :cdata:`PyDateTime_DateTimeType`. *ob* must not be *NULL*. + Return true if *ob* is of type :c:data:`PyDateTime_DateTimeType` or a subtype of + :c:data:`PyDateTime_DateTimeType`. *ob* must not be *NULL*. .. versionadded:: 2.4 -.. cfunction:: int PyDateTime_CheckExact(PyObject *ob) +.. c:function:: int PyDateTime_CheckExact(PyObject *ob) - Return true if *ob* is of type :cdata:`PyDateTime_DateTimeType`. *ob* must not + Return true if *ob* is of type :c:data:`PyDateTime_DateTimeType`. *ob* must not be *NULL*. .. versionadded:: 2.4 -.. cfunction:: int PyTime_Check(PyObject *ob) +.. c:function:: int PyTime_Check(PyObject *ob) - Return true if *ob* is of type :cdata:`PyDateTime_TimeType` or a subtype of - :cdata:`PyDateTime_TimeType`. *ob* must not be *NULL*. + Return true if *ob* is of type :c:data:`PyDateTime_TimeType` or a subtype of + :c:data:`PyDateTime_TimeType`. *ob* must not be *NULL*. .. versionadded:: 2.4 -.. cfunction:: int PyTime_CheckExact(PyObject *ob) +.. c:function:: int PyTime_CheckExact(PyObject *ob) - Return true if *ob* is of type :cdata:`PyDateTime_TimeType`. *ob* must not be + Return true if *ob* is of type :c:data:`PyDateTime_TimeType`. *ob* must not be *NULL*. .. versionadded:: 2.4 -.. cfunction:: int PyDelta_Check(PyObject *ob) +.. c:function:: int PyDelta_Check(PyObject *ob) - Return true if *ob* is of type :cdata:`PyDateTime_DeltaType` or a subtype of - :cdata:`PyDateTime_DeltaType`. *ob* must not be *NULL*. + Return true if *ob* is of type :c:data:`PyDateTime_DeltaType` or a subtype of + :c:data:`PyDateTime_DeltaType`. *ob* must not be *NULL*. .. versionadded:: 2.4 -.. cfunction:: int PyDelta_CheckExact(PyObject *ob) +.. c:function:: int PyDelta_CheckExact(PyObject *ob) - Return true if *ob* is of type :cdata:`PyDateTime_DeltaType`. *ob* must not be + Return true if *ob* is of type :c:data:`PyDateTime_DeltaType`. *ob* must not be *NULL*. .. versionadded:: 2.4 -.. cfunction:: int PyTZInfo_Check(PyObject *ob) +.. c:function:: int PyTZInfo_Check(PyObject *ob) - Return true if *ob* is of type :cdata:`PyDateTime_TZInfoType` or a subtype of - :cdata:`PyDateTime_TZInfoType`. *ob* must not be *NULL*. + Return true if *ob* is of type :c:data:`PyDateTime_TZInfoType` or a subtype of + :c:data:`PyDateTime_TZInfoType`. *ob* must not be *NULL*. .. versionadded:: 2.4 -.. cfunction:: int PyTZInfo_CheckExact(PyObject *ob) +.. c:function:: int PyTZInfo_CheckExact(PyObject *ob) - Return true if *ob* is of type :cdata:`PyDateTime_TZInfoType`. *ob* must not be + Return true if *ob* is of type :c:data:`PyDateTime_TZInfoType`. *ob* must not be *NULL*. .. versionadded:: 2.4 @@ -98,14 +98,14 @@ Type-check macros: Macros to create objects: -.. cfunction:: PyObject* PyDate_FromDate(int year, int month, int day) +.. c:function:: PyObject* PyDate_FromDate(int year, int month, int day) Return a ``datetime.date`` object with the specified year, month and day. .. versionadded:: 2.4 -.. cfunction:: PyObject* PyDateTime_FromDateAndTime(int year, int month, int day, int hour, int minute, int second, int usecond) +.. c:function:: PyObject* PyDateTime_FromDateAndTime(int year, int month, int day, int hour, int minute, int second, int usecond) Return a ``datetime.datetime`` object with the specified year, month, day, hour, minute, second and microsecond. @@ -113,7 +113,7 @@ Macros to create objects: .. versionadded:: 2.4 -.. cfunction:: PyObject* PyTime_FromTime(int hour, int minute, int second, int usecond) +.. c:function:: PyObject* PyTime_FromTime(int hour, int minute, int second, int usecond) Return a ``datetime.time`` object with the specified hour, minute, second and microsecond. @@ -121,7 +121,7 @@ Macros to create objects: .. versionadded:: 2.4 -.. cfunction:: PyObject* PyDelta_FromDSU(int days, int seconds, int useconds) +.. c:function:: PyObject* PyDelta_FromDSU(int days, int seconds, int useconds) Return a ``datetime.timedelta`` object representing the given number of days, seconds and microseconds. Normalization is performed so that the resulting @@ -131,90 +131,90 @@ Macros to create objects: .. versionadded:: 2.4 Macros to extract fields from date objects. The argument must be an instance of -:cdata:`PyDateTime_Date`, including subclasses (such as -:cdata:`PyDateTime_DateTime`). The argument must not be *NULL*, and the type is +:c:data:`PyDateTime_Date`, including subclasses (such as +:c:data:`PyDateTime_DateTime`). The argument must not be *NULL*, and the type is not checked: -.. cfunction:: int PyDateTime_GET_YEAR(PyDateTime_Date *o) +.. c:function:: int PyDateTime_GET_YEAR(PyDateTime_Date *o) Return the year, as a positive int. .. versionadded:: 2.4 -.. cfunction:: int PyDateTime_GET_MONTH(PyDateTime_Date *o) +.. c:function:: int PyDateTime_GET_MONTH(PyDateTime_Date *o) Return the month, as an int from 1 through 12. .. versionadded:: 2.4 -.. cfunction:: int PyDateTime_GET_DAY(PyDateTime_Date *o) +.. c:function:: int PyDateTime_GET_DAY(PyDateTime_Date *o) Return the day, as an int from 1 through 31. .. versionadded:: 2.4 Macros to extract fields from datetime objects. The argument must be an -instance of :cdata:`PyDateTime_DateTime`, including subclasses. The argument +instance of :c:data:`PyDateTime_DateTime`, including subclasses. The argument must not be *NULL*, and the type is not checked: -.. cfunction:: int PyDateTime_DATE_GET_HOUR(PyDateTime_DateTime *o) +.. c:function:: int PyDateTime_DATE_GET_HOUR(PyDateTime_DateTime *o) Return the hour, as an int from 0 through 23. .. versionadded:: 2.4 -.. cfunction:: int PyDateTime_DATE_GET_MINUTE(PyDateTime_DateTime *o) +.. c:function:: int PyDateTime_DATE_GET_MINUTE(PyDateTime_DateTime *o) Return the minute, as an int from 0 through 59. .. versionadded:: 2.4 -.. cfunction:: int PyDateTime_DATE_GET_SECOND(PyDateTime_DateTime *o) +.. c:function:: int PyDateTime_DATE_GET_SECOND(PyDateTime_DateTime *o) Return the second, as an int from 0 through 59. .. versionadded:: 2.4 -.. cfunction:: int PyDateTime_DATE_GET_MICROSECOND(PyDateTime_DateTime *o) +.. c:function:: int PyDateTime_DATE_GET_MICROSECOND(PyDateTime_DateTime *o) Return the microsecond, as an int from 0 through 999999. .. versionadded:: 2.4 Macros to extract fields from time objects. The argument must be an instance of -:cdata:`PyDateTime_Time`, including subclasses. The argument must not be *NULL*, +:c:data:`PyDateTime_Time`, including subclasses. The argument must not be *NULL*, and the type is not checked: -.. cfunction:: int PyDateTime_TIME_GET_HOUR(PyDateTime_Time *o) +.. c:function:: int PyDateTime_TIME_GET_HOUR(PyDateTime_Time *o) Return the hour, as an int from 0 through 23. .. versionadded:: 2.4 -.. cfunction:: int PyDateTime_TIME_GET_MINUTE(PyDateTime_Time *o) +.. c:function:: int PyDateTime_TIME_GET_MINUTE(PyDateTime_Time *o) Return the minute, as an int from 0 through 59. .. versionadded:: 2.4 -.. cfunction:: int PyDateTime_TIME_GET_SECOND(PyDateTime_Time *o) +.. c:function:: int PyDateTime_TIME_GET_SECOND(PyDateTime_Time *o) Return the second, as an int from 0 through 59. .. versionadded:: 2.4 -.. cfunction:: int PyDateTime_TIME_GET_MICROSECOND(PyDateTime_Time *o) +.. c:function:: int PyDateTime_TIME_GET_MICROSECOND(PyDateTime_Time *o) Return the microsecond, as an int from 0 through 999999. @@ -223,7 +223,7 @@ and the type is not checked: Macros for the convenience of modules implementing the DB API: -.. cfunction:: PyObject* PyDateTime_FromTimestamp(PyObject *args) +.. c:function:: PyObject* PyDateTime_FromTimestamp(PyObject *args) Create and return a new ``datetime.datetime`` object given an argument tuple suitable for passing to ``datetime.datetime.fromtimestamp()``. @@ -231,7 +231,7 @@ Macros for the convenience of modules implementing the DB API: .. versionadded:: 2.4 -.. cfunction:: PyObject* PyDate_FromTimestamp(PyObject *args) +.. c:function:: PyObject* PyDate_FromTimestamp(PyObject *args) Create and return a new ``datetime.date`` object given an argument tuple suitable for passing to ``datetime.date.fromtimestamp()``. diff --git a/Doc/c-api/descriptor.rst b/Doc/c-api/descriptor.rst index 6ed84335..43baeaf 100644 --- a/Doc/c-api/descriptor.rst +++ b/Doc/c-api/descriptor.rst @@ -9,39 +9,39 @@ Descriptor Objects found in the dictionary of type objects. -.. cvar:: PyTypeObject PyProperty_Type +.. c:var:: PyTypeObject PyProperty_Type The type object for the built-in descriptor types. .. versionadded:: 2.2 -.. cfunction:: PyObject* PyDescr_NewGetSet(PyTypeObject *type, struct PyGetSetDef *getset) +.. c:function:: PyObject* PyDescr_NewGetSet(PyTypeObject *type, struct PyGetSetDef *getset) .. versionadded:: 2.2 -.. cfunction:: PyObject* PyDescr_NewMember(PyTypeObject *type, struct PyMemberDef *meth) +.. c:function:: PyObject* PyDescr_NewMember(PyTypeObject *type, struct PyMemberDef *meth) .. versionadded:: 2.2 -.. cfunction:: PyObject* PyDescr_NewMethod(PyTypeObject *type, struct PyMethodDef *meth) +.. c:function:: PyObject* PyDescr_NewMethod(PyTypeObject *type, struct PyMethodDef *meth) .. versionadded:: 2.2 -.. cfunction:: PyObject* PyDescr_NewWrapper(PyTypeObject *type, struct wrapperbase *wrapper, void *wrapped) +.. c:function:: PyObject* PyDescr_NewWrapper(PyTypeObject *type, struct wrapperbase *wrapper, void *wrapped) .. versionadded:: 2.2 -.. cfunction:: PyObject* PyDescr_NewClassMethod(PyTypeObject *type, PyMethodDef *method) +.. c:function:: PyObject* PyDescr_NewClassMethod(PyTypeObject *type, PyMethodDef *method) .. versionadded:: 2.3 -.. cfunction:: int PyDescr_IsData(PyObject *descr) +.. c:function:: int PyDescr_IsData(PyObject *descr) Return true if the descriptor objects *descr* describes a data attribute, or false if it describes a method. *descr* must be a descriptor object; there is @@ -50,6 +50,6 @@ found in the dictionary of type objects. .. versionadded:: 2.2 -.. cfunction:: PyObject* PyWrapper_New(PyObject *, PyObject *) +.. c:function:: PyObject* PyWrapper_New(PyObject *, PyObject *) .. versionadded:: 2.2 diff --git a/Doc/c-api/dict.rst b/Doc/c-api/dict.rst index 066e7f1..3e967bd 100644 --- a/Doc/c-api/dict.rst +++ b/Doc/c-api/dict.rst @@ -8,23 +8,23 @@ Dictionary Objects .. index:: object: dictionary -.. ctype:: PyDictObject +.. c:type:: PyDictObject - This subtype of :ctype:`PyObject` represents a Python dictionary object. + This subtype of :c:type:`PyObject` represents a Python dictionary object. -.. cvar:: PyTypeObject PyDict_Type +.. c:var:: PyTypeObject PyDict_Type .. index:: single: DictType (in module types) single: DictionaryType (in module types) - This instance of :ctype:`PyTypeObject` represents the Python dictionary + This instance of :c:type:`PyTypeObject` represents the Python dictionary type. This is exposed to Python programs as ``dict`` and ``types.DictType``. -.. cfunction:: int PyDict_Check(PyObject *p) +.. c:function:: int PyDict_Check(PyObject *p) Return true if *p* is a dict object or an instance of a subtype of the dict type. @@ -33,7 +33,7 @@ Dictionary Objects Allowed subtypes to be accepted. -.. cfunction:: int PyDict_CheckExact(PyObject *p) +.. c:function:: int PyDict_CheckExact(PyObject *p) Return true if *p* is a dict object, but not an instance of a subtype of the dict type. @@ -41,12 +41,12 @@ Dictionary Objects .. versionadded:: 2.4 -.. cfunction:: PyObject* PyDict_New() +.. c:function:: PyObject* PyDict_New() Return a new empty dictionary, or *NULL* on failure. -.. cfunction:: PyObject* PyDictProxy_New(PyObject *dict) +.. c:function:: PyObject* PyDictProxy_New(PyObject *dict) Return a proxy object for a mapping which enforces read-only behavior. This is normally used to create a proxy to prevent modification of the @@ -55,12 +55,12 @@ Dictionary Objects .. versionadded:: 2.2 -.. cfunction:: void PyDict_Clear(PyObject *p) +.. c:function:: void PyDict_Clear(PyObject *p) Empty an existing dictionary of all key-value pairs. -.. cfunction:: int PyDict_Contains(PyObject *p, PyObject *key) +.. c:function:: int PyDict_Contains(PyObject *p, PyObject *key) Determine if dictionary *p* contains *key*. If an item in *p* is matches *key*, return ``1``, otherwise return ``0``. On error, return ``-1``. @@ -69,74 +69,74 @@ Dictionary Objects .. versionadded:: 2.4 -.. cfunction:: PyObject* PyDict_Copy(PyObject *p) +.. c:function:: PyObject* PyDict_Copy(PyObject *p) Return a new dictionary that contains the same key-value pairs as *p*. .. versionadded:: 1.6 -.. cfunction:: int PyDict_SetItem(PyObject *p, PyObject *key, PyObject *val) +.. c:function:: int PyDict_SetItem(PyObject *p, PyObject *key, PyObject *val) Insert *value* into the dictionary *p* with a key of *key*. *key* must be :term:`hashable`; if it isn't, :exc:`TypeError` will be raised. Return ``0`` on success or ``-1`` on failure. -.. cfunction:: int PyDict_SetItemString(PyObject *p, const char *key, PyObject *val) +.. c:function:: int PyDict_SetItemString(PyObject *p, const char *key, PyObject *val) .. index:: single: PyString_FromString() Insert *value* into the dictionary *p* using *key* as a key. *key* should - be a :ctype:`char\*`. The key object is created using + be a :c:type:`char\*`. The key object is created using ``PyString_FromString(key)``. Return ``0`` on success or ``-1`` on failure. -.. cfunction:: int PyDict_DelItem(PyObject *p, PyObject *key) +.. c:function:: int PyDict_DelItem(PyObject *p, PyObject *key) Remove the entry in dictionary *p* with key *key*. *key* must be hashable; if it isn't, :exc:`TypeError` is raised. Return ``0`` on success or ``-1`` on failure. -.. cfunction:: int PyDict_DelItemString(PyObject *p, char *key) +.. c:function:: int PyDict_DelItemString(PyObject *p, char *key) Remove the entry in dictionary *p* which has a key specified by the string *key*. Return ``0`` on success or ``-1`` on failure. -.. cfunction:: PyObject* PyDict_GetItem(PyObject *p, PyObject *key) +.. c:function:: PyObject* PyDict_GetItem(PyObject *p, PyObject *key) Return the object from dictionary *p* which has a key *key*. Return *NULL* if the key *key* is not present, but *without* setting an exception. -.. cfunction:: PyObject* PyDict_GetItemString(PyObject *p, const char *key) +.. c:function:: PyObject* PyDict_GetItemString(PyObject *p, const char *key) - This is the same as :cfunc:`PyDict_GetItem`, but *key* is specified as a - :ctype:`char\*`, rather than a :ctype:`PyObject\*`. + This is the same as :c:func:`PyDict_GetItem`, but *key* is specified as a + :c:type:`char\*`, rather than a :c:type:`PyObject\*`. -.. cfunction:: PyObject* PyDict_Items(PyObject *p) +.. c:function:: PyObject* PyDict_Items(PyObject *p) - Return a :ctype:`PyListObject` containing all the items from the + Return a :c:type:`PyListObject` containing all the items from the dictionary, as in the dictionary method :meth:`dict.items`. -.. cfunction:: PyObject* PyDict_Keys(PyObject *p) +.. c:function:: PyObject* PyDict_Keys(PyObject *p) - Return a :ctype:`PyListObject` containing all the keys from the dictionary, + Return a :c:type:`PyListObject` containing all the keys from the dictionary, as in the dictionary method :meth:`dict.keys`. -.. cfunction:: PyObject* PyDict_Values(PyObject *p) +.. c:function:: PyObject* PyDict_Values(PyObject *p) - Return a :ctype:`PyListObject` containing all the values from the + Return a :c:type:`PyListObject` containing all the values from the dictionary *p*, as in the dictionary method :meth:`dict.values`. -.. cfunction:: Py_ssize_t PyDict_Size(PyObject *p) +.. c:function:: Py_ssize_t PyDict_Size(PyObject *p) .. index:: builtin: len @@ -144,18 +144,18 @@ Dictionary Objects ``len(p)`` on a dictionary. .. versionchanged:: 2.5 - This function returned an :ctype:`int` type. This might require changes + This function returned an :c:type:`int` type. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: int PyDict_Next(PyObject *p, Py_ssize_t *ppos, PyObject **pkey, PyObject **pvalue) +.. c:function:: int PyDict_Next(PyObject *p, Py_ssize_t *ppos, PyObject **pkey, PyObject **pvalue) Iterate over all key-value pairs in the dictionary *p*. The - :ctype:`Py_ssize_t` referred to by *ppos* must be initialized to ``0`` + :c:type:`Py_ssize_t` referred to by *ppos* must be initialized to ``0`` prior to the first call to this function to start the iteration; the function returns true for each pair in the dictionary, and false once all pairs have been reported. The parameters *pkey* and *pvalue* should either - point to :ctype:`PyObject\*` variables that will be filled in with each key + point to :c:type:`PyObject\*` variables that will be filled in with each key and value, respectively, or may be *NULL*. Any references returned through them are borrowed. *ppos* should not be altered during iteration. Its value represents offsets within the internal dictionary structure, and @@ -192,15 +192,15 @@ Dictionary Objects } .. versionchanged:: 2.5 - This function used an :ctype:`int *` type for *ppos*. This might require + This function used an :c:type:`int *` type for *ppos*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: int PyDict_Merge(PyObject *a, PyObject *b, int override) +.. c:function:: int PyDict_Merge(PyObject *a, PyObject *b, int override) Iterate over mapping object *b* adding key-value pairs to dictionary *a*. - *b* may be a dictionary, or any object supporting :cfunc:`PyMapping_Keys` - and :cfunc:`PyObject_GetItem`. If *override* is true, existing pairs in *a* + *b* may be a dictionary, or any object supporting :c:func:`PyMapping_Keys` + and :c:func:`PyObject_GetItem`. If *override* is true, existing pairs in *a* will be replaced if a matching key is found in *b*, otherwise pairs will only be added if there is not a matching key in *a*. Return ``0`` on success or ``-1`` if an exception was raised. @@ -208,7 +208,7 @@ Dictionary Objects .. versionadded:: 2.2 -.. cfunction:: int PyDict_Update(PyObject *a, PyObject *b) +.. c:function:: int PyDict_Update(PyObject *a, PyObject *b) This is the same as ``PyDict_Merge(a, b, 1)`` in C, or ``a.update(b)`` in Python. Return ``0`` on success or ``-1`` if an exception was raised. @@ -216,7 +216,7 @@ Dictionary Objects .. versionadded:: 2.2 -.. cfunction:: int PyDict_MergeFromSeq2(PyObject *a, PyObject *seq2, int override) +.. c:function:: int PyDict_MergeFromSeq2(PyObject *a, PyObject *seq2, int override) Update or merge into dictionary *a*, from the key-value pairs in *seq2*. *seq2* must be an iterable object producing iterable objects of length 2, diff --git a/Doc/c-api/exceptions.rst b/Doc/c-api/exceptions.rst index beedfbe..025b75a 100644 --- a/Doc/c-api/exceptions.rst +++ b/Doc/c-api/exceptions.rst @@ -9,12 +9,12 @@ Exception Handling The functions described in this chapter will let you handle and raise Python exceptions. It is important to understand some of the basics of Python -exception handling. It works somewhat like the Unix :cdata:`errno` variable: +exception handling. It works somewhat like the Unix :c:data:`errno` variable: there is a global indicator (per thread) of the last error that occurred. Most functions don't clear this on success, but will set it to indicate the cause of the error on failure. Most functions also return an error indicator, usually *NULL* if they are supposed to return a pointer, or ``-1`` if they return an -integer (exception: the :cfunc:`PyArg_\*` functions return ``1`` for success and +integer (exception: the :c:func:`PyArg_\*` functions return ``1`` for success and ``0`` for failure). When a function must fail because some function it called failed, it generally @@ -41,7 +41,7 @@ is a separate error indicator for each thread. Either alphabetical or some kind of structure. -.. cfunction:: void PyErr_PrintEx(int set_sys_last_vars) +.. c:function:: void PyErr_PrintEx(int set_sys_last_vars) Print a standard traceback to ``sys.stderr`` and clear the error indicator. Call this function only when the error indicator is set. (Otherwise it will @@ -52,35 +52,35 @@ is a separate error indicator for each thread. type, value and traceback of the printed exception, respectively. -.. cfunction:: void PyErr_Print() +.. c:function:: void PyErr_Print() Alias for ``PyErr_PrintEx(1)``. -.. cfunction:: PyObject* PyErr_Occurred() +.. c:function:: PyObject* PyErr_Occurred() Test whether the error indicator is set. If set, return the exception *type* - (the first argument to the last call to one of the :cfunc:`PyErr_Set\*` - functions or to :cfunc:`PyErr_Restore`). If not set, return *NULL*. You do not - own a reference to the return value, so you do not need to :cfunc:`Py_DECREF` + (the first argument to the last call to one of the :c:func:`PyErr_Set\*` + functions or to :c:func:`PyErr_Restore`). If not set, return *NULL*. You do not + own a reference to the return value, so you do not need to :c:func:`Py_DECREF` it. .. note:: Do not compare the return value to a specific exception; use - :cfunc:`PyErr_ExceptionMatches` instead, shown below. (The comparison could + :c:func:`PyErr_ExceptionMatches` instead, shown below. (The comparison could easily fail since the exception may be an instance instead of a class, in the case of a class exception, or it may the a subclass of the expected exception.) -.. cfunction:: int PyErr_ExceptionMatches(PyObject *exc) +.. c:function:: int PyErr_ExceptionMatches(PyObject *exc) Equivalent to ``PyErr_GivenExceptionMatches(PyErr_Occurred(), exc)``. This should only be called when an exception is actually set; a memory access violation will occur if no exception has been raised. -.. cfunction:: int PyErr_GivenExceptionMatches(PyObject *given, PyObject *exc) +.. c:function:: int PyErr_GivenExceptionMatches(PyObject *given, PyObject *exc) Return true if the *given* exception matches the exception in *exc*. If *exc* is a class object, this also returns true when *given* is an instance @@ -88,22 +88,22 @@ is a separate error indicator for each thread. recursively in subtuples) are searched for a match. -.. cfunction:: void PyErr_NormalizeException(PyObject**exc, PyObject**val, PyObject**tb) +.. c:function:: void PyErr_NormalizeException(PyObject**exc, PyObject**val, PyObject**tb) - Under certain circumstances, the values returned by :cfunc:`PyErr_Fetch` below + Under certain circumstances, the values returned by :c:func:`PyErr_Fetch` below can be "unnormalized", meaning that ``*exc`` is a class object but ``*val`` is not an instance of the same class. This function can be used to instantiate the class in that case. If the values are already normalized, nothing happens. The delayed normalization is implemented to improve performance. -.. cfunction:: void PyErr_Clear() +.. c:function:: void PyErr_Clear() Clear the error indicator. If the error indicator is not set, there is no effect. -.. cfunction:: void PyErr_Fetch(PyObject **ptype, PyObject **pvalue, PyObject **ptraceback) +.. c:function:: void PyErr_Fetch(PyObject **ptype, PyObject **pvalue, PyObject **ptraceback) Retrieve the error indicator into three variables whose addresses are passed. If the error indicator is not set, set all three variables to *NULL*. If it is @@ -116,7 +116,7 @@ is a separate error indicator for each thread. by code that needs to save and restore the error indicator temporarily. -.. cfunction:: void PyErr_Restore(PyObject *type, PyObject *value, PyObject *traceback) +.. c:function:: void PyErr_Restore(PyObject *type, PyObject *value, PyObject *traceback) Set the error indicator from the three objects. If the error indicator is already set, it is cleared first. If the objects are *NULL*, the error @@ -131,111 +131,111 @@ is a separate error indicator for each thread. .. note:: This function is normally only used by code that needs to save and restore the - error indicator temporarily; use :cfunc:`PyErr_Fetch` to save the current + error indicator temporarily; use :c:func:`PyErr_Fetch` to save the current exception state. -.. cfunction:: void PyErr_SetString(PyObject *type, const char *message) +.. c:function:: void PyErr_SetString(PyObject *type, const char *message) This is the most common way to set the error indicator. The first argument specifies the exception type; it is normally one of the standard exceptions, - e.g. :cdata:`PyExc_RuntimeError`. You need not increment its reference count. + e.g. :c:data:`PyExc_RuntimeError`. You need not increment its reference count. The second argument is an error message; it is converted to a string object. -.. cfunction:: void PyErr_SetObject(PyObject *type, PyObject *value) +.. c:function:: void PyErr_SetObject(PyObject *type, PyObject *value) - This function is similar to :cfunc:`PyErr_SetString` but lets you specify an + This function is similar to :c:func:`PyErr_SetString` but lets you specify an arbitrary Python object for the "value" of the exception. -.. cfunction:: PyObject* PyErr_Format(PyObject *exception, const char *format, ...) +.. c:function:: PyObject* PyErr_Format(PyObject *exception, const char *format, ...) This function sets the error indicator and returns *NULL*. *exception* should be a Python exception class. The *format* and subsequent parameters help format the error message; they have the same meaning and - values as in :cfunc:`PyString_FromFormat`. + values as in :c:func:`PyString_FromFormat`. -.. cfunction:: void PyErr_SetNone(PyObject *type) +.. c:function:: void PyErr_SetNone(PyObject *type) This is a shorthand for ``PyErr_SetObject(type, Py_None)``. -.. cfunction:: int PyErr_BadArgument() +.. c:function:: int PyErr_BadArgument() This is a shorthand for ``PyErr_SetString(PyExc_TypeError, message)``, where *message* indicates that a built-in operation was invoked with an illegal argument. It is mostly for internal use. -.. cfunction:: PyObject* PyErr_NoMemory() +.. c:function:: PyObject* PyErr_NoMemory() This is a shorthand for ``PyErr_SetNone(PyExc_MemoryError)``; it returns *NULL* so an object allocation function can write ``return PyErr_NoMemory();`` when it runs out of memory. -.. cfunction:: PyObject* PyErr_SetFromErrno(PyObject *type) +.. c:function:: PyObject* PyErr_SetFromErrno(PyObject *type) .. index:: single: strerror() This is a convenience function to raise an exception when a C library function - has returned an error and set the C variable :cdata:`errno`. It constructs a - tuple object whose first item is the integer :cdata:`errno` value and whose - second item is the corresponding error message (gotten from :cfunc:`strerror`), + has returned an error and set the C variable :c:data:`errno`. It constructs a + tuple object whose first item is the integer :c:data:`errno` value and whose + second item is the corresponding error message (gotten from :c:func:`strerror`), and then calls ``PyErr_SetObject(type, object)``. On Unix, when the - :cdata:`errno` value is :const:`EINTR`, indicating an interrupted system call, - this calls :cfunc:`PyErr_CheckSignals`, and if that set the error indicator, + :c:data:`errno` value is :const:`EINTR`, indicating an interrupted system call, + this calls :c:func:`PyErr_CheckSignals`, and if that set the error indicator, leaves it set to that. The function always returns *NULL*, so a wrapper function around a system call can write ``return PyErr_SetFromErrno(type);`` when the system call returns an error. -.. cfunction:: PyObject* PyErr_SetFromErrnoWithFilename(PyObject *type, const char *filename) +.. c:function:: PyObject* PyErr_SetFromErrnoWithFilename(PyObject *type, const char *filename) - Similar to :cfunc:`PyErr_SetFromErrno`, with the additional behavior that if + Similar to :c:func:`PyErr_SetFromErrno`, with the additional behavior that if *filename* is not *NULL*, it is passed to the constructor of *type* as a third parameter. In the case of exceptions such as :exc:`IOError` and :exc:`OSError`, this is used to define the :attr:`filename` attribute of the exception instance. -.. cfunction:: PyObject* PyErr_SetFromWindowsErr(int ierr) +.. c:function:: PyObject* PyErr_SetFromWindowsErr(int ierr) This is a convenience function to raise :exc:`WindowsError`. If called with - *ierr* of :cdata:`0`, the error code returned by a call to :cfunc:`GetLastError` - is used instead. It calls the Win32 function :cfunc:`FormatMessage` to retrieve - the Windows description of error code given by *ierr* or :cfunc:`GetLastError`, + *ierr* of :c:data:`0`, the error code returned by a call to :c:func:`GetLastError` + is used instead. It calls the Win32 function :c:func:`FormatMessage` to retrieve + the Windows description of error code given by *ierr* or :c:func:`GetLastError`, then it constructs a tuple object whose first item is the *ierr* value and whose second item is the corresponding error message (gotten from - :cfunc:`FormatMessage`), and then calls ``PyErr_SetObject(PyExc_WindowsError, + :c:func:`FormatMessage`), and then calls ``PyErr_SetObject(PyExc_WindowsError, object)``. This function always returns *NULL*. Availability: Windows. -.. cfunction:: PyObject* PyErr_SetExcFromWindowsErr(PyObject *type, int ierr) +.. c:function:: PyObject* PyErr_SetExcFromWindowsErr(PyObject *type, int ierr) - Similar to :cfunc:`PyErr_SetFromWindowsErr`, with an additional parameter + Similar to :c:func:`PyErr_SetFromWindowsErr`, with an additional parameter specifying the exception type to be raised. Availability: Windows. .. versionadded:: 2.3 -.. cfunction:: PyObject* PyErr_SetFromWindowsErrWithFilename(int ierr, const char *filename) +.. c:function:: PyObject* PyErr_SetFromWindowsErrWithFilename(int ierr, const char *filename) - Similar to :cfunc:`PyErr_SetFromWindowsErr`, with the additional behavior that + Similar to :c:func:`PyErr_SetFromWindowsErr`, with the additional behavior that if *filename* is not *NULL*, it is passed to the constructor of :exc:`WindowsError` as a third parameter. Availability: Windows. -.. cfunction:: PyObject* PyErr_SetExcFromWindowsErrWithFilename(PyObject *type, int ierr, char *filename) +.. c:function:: PyObject* PyErr_SetExcFromWindowsErrWithFilename(PyObject *type, int ierr, char *filename) - Similar to :cfunc:`PyErr_SetFromWindowsErrWithFilename`, with an additional + Similar to :c:func:`PyErr_SetFromWindowsErrWithFilename`, with an additional parameter specifying the exception type to be raised. Availability: Windows. .. versionadded:: 2.3 -.. cfunction:: void PyErr_BadInternalCall() +.. c:function:: void PyErr_BadInternalCall() This is a shorthand for ``PyErr_SetString(PyExc_SystemError, message)``, where *message* indicates that an internal operation (e.g. a Python/C API @@ -243,13 +243,13 @@ is a separate error indicator for each thread. use. -.. cfunction:: int PyErr_WarnEx(PyObject *category, char *message, int stacklevel) +.. c:function:: int PyErr_WarnEx(PyObject *category, char *message, int stacklevel) Issue a warning message. The *category* argument is a warning category (see below) or *NULL*; the *message* argument is a message string. *stacklevel* is a positive number giving a number of stack frames; the warning will be issued from the currently executing line of code in that stack frame. A *stacklevel* of 1 - is the function calling :cfunc:`PyErr_WarnEx`, 2 is the function above that, + is the function calling :c:func:`PyErr_WarnEx`, 2 is the function above that, and so forth. This function normally prints a warning message to *sys.stderr*; however, it is @@ -261,36 +261,36 @@ is a separate error indicator for each thread. is raised. (It is not possible to determine whether a warning message is actually printed, nor what the reason is for the exception; this is intentional.) If an exception is raised, the caller should do its normal - exception handling (for example, :cfunc:`Py_DECREF` owned references and return + exception handling (for example, :c:func:`Py_DECREF` owned references and return an error value). - Warning categories must be subclasses of :cdata:`Warning`; the default warning - category is :cdata:`RuntimeWarning`. The standard Python warning categories are + Warning categories must be subclasses of :c:data:`Warning`; the default warning + category is :c:data:`RuntimeWarning`. The standard Python warning categories are available as global variables whose names are ``PyExc_`` followed by the Python - exception name. These have the type :ctype:`PyObject\*`; they are all class - objects. Their names are :cdata:`PyExc_Warning`, :cdata:`PyExc_UserWarning`, - :cdata:`PyExc_UnicodeWarning`, :cdata:`PyExc_DeprecationWarning`, - :cdata:`PyExc_SyntaxWarning`, :cdata:`PyExc_RuntimeWarning`, and - :cdata:`PyExc_FutureWarning`. :cdata:`PyExc_Warning` is a subclass of - :cdata:`PyExc_Exception`; the other warning categories are subclasses of - :cdata:`PyExc_Warning`. + exception name. These have the type :c:type:`PyObject\*`; they are all class + objects. Their names are :c:data:`PyExc_Warning`, :c:data:`PyExc_UserWarning`, + :c:data:`PyExc_UnicodeWarning`, :c:data:`PyExc_DeprecationWarning`, + :c:data:`PyExc_SyntaxWarning`, :c:data:`PyExc_RuntimeWarning`, and + :c:data:`PyExc_FutureWarning`. :c:data:`PyExc_Warning` is a subclass of + :c:data:`PyExc_Exception`; the other warning categories are subclasses of + :c:data:`PyExc_Warning`. For information about warning control, see the documentation for the :mod:`warnings` module and the :option:`-W` option in the command line documentation. There is no C API for warning control. -.. cfunction:: int PyErr_Warn(PyObject *category, char *message) +.. c:function:: int PyErr_Warn(PyObject *category, char *message) Issue a warning message. The *category* argument is a warning category (see below) or *NULL*; the *message* argument is a message string. The warning will - appear to be issued from the function calling :cfunc:`PyErr_Warn`, equivalent to - calling :cfunc:`PyErr_WarnEx` with a *stacklevel* of 1. + appear to be issued from the function calling :c:func:`PyErr_Warn`, equivalent to + calling :c:func:`PyErr_WarnEx` with a *stacklevel* of 1. - Deprecated; use :cfunc:`PyErr_WarnEx` instead. + Deprecated; use :c:func:`PyErr_WarnEx` instead. -.. cfunction:: int PyErr_WarnExplicit(PyObject *category, const char *message, const char *filename, int lineno, const char *module, PyObject *registry) +.. c:function:: int PyErr_WarnExplicit(PyObject *category, const char *message, const char *filename, int lineno, const char *module, PyObject *registry) Issue a warning message with explicit control over all warning attributes. This is a straightforward wrapper around the Python function @@ -299,15 +299,15 @@ is a separate error indicator for each thread. described there. -.. cfunction:: int PyErr_WarnPy3k(char *message, int stacklevel) +.. c:function:: int PyErr_WarnPy3k(char *message, int stacklevel) Issue a :exc:`DeprecationWarning` with the given *message* and *stacklevel* - if the :cdata:`Py_Py3kWarningFlag` flag is enabled. + if the :c:data:`Py_Py3kWarningFlag` flag is enabled. .. versionadded:: 2.6 -.. cfunction:: int PyErr_CheckSignals() +.. c:function:: int PyErr_CheckSignals() .. index:: module: signal @@ -324,21 +324,21 @@ is a separate error indicator for each thread. cleared if it was previously set. -.. cfunction:: void PyErr_SetInterrupt() +.. c:function:: void PyErr_SetInterrupt() .. index:: single: SIGINT single: KeyboardInterrupt (built-in exception) This function simulates the effect of a :const:`SIGINT` signal arriving --- the - next time :cfunc:`PyErr_CheckSignals` is called, :exc:`KeyboardInterrupt` will + next time :c:func:`PyErr_CheckSignals` is called, :exc:`KeyboardInterrupt` will be raised. It may be called without holding the interpreter lock. .. % XXX This was described as obsolete, but is used in .. % thread.interrupt_main() (used from IDLE), so it's still needed. -.. cfunction:: int PySignal_SetWakeupFd(int fd) +.. c:function:: int PySignal_SetWakeupFd(int fd) This utility function specifies a file descriptor to which a ``'\0'`` byte will be written whenever a signal is received. It returns the previous such file @@ -350,13 +350,13 @@ is a separate error indicator for each thread. .. versionadded:: 2.6 -.. cfunction:: PyObject* PyErr_NewException(char *name, PyObject *base, PyObject *dict) +.. c:function:: PyObject* PyErr_NewException(char *name, PyObject *base, PyObject *dict) This utility function creates and returns a new exception class. The *name* argument must be the name of the new exception, a C string of the form ``module.classname``. The *base* and *dict* arguments are normally *NULL*. This creates a class object derived from :exc:`Exception` (accessible in C as - :cdata:`PyExc_Exception`). + :c:data:`PyExc_Exception`). The :attr:`__module__` attribute of the new class is set to the first part (up to the last dot) of the *name* argument, and the class name is set to the last @@ -365,16 +365,16 @@ is a separate error indicator for each thread. argument can be used to specify a dictionary of class variables and methods. -.. cfunction:: PyObject* PyErr_NewExceptionWithDoc(char *name, char *doc, PyObject *base, PyObject *dict) +.. c:function:: PyObject* PyErr_NewExceptionWithDoc(char *name, char *doc, PyObject *base, PyObject *dict) - Same as :cfunc:`PyErr_NewException`, except that the new exception class can + Same as :c:func:`PyErr_NewException`, except that the new exception class can easily be given a docstring: If *doc* is non-*NULL*, it will be used as the docstring for the exception class. .. versionadded:: 2.7 -.. cfunction:: void PyErr_WriteUnraisable(PyObject *obj) +.. c:function:: void PyErr_WriteUnraisable(PyObject *obj) This utility function prints a warning message to ``sys.stderr`` when an exception has been set but it is impossible for the interpreter to actually @@ -393,33 +393,33 @@ Unicode Exception Objects The following functions are used to create and modify Unicode exceptions from C. -.. cfunction:: PyObject* PyUnicodeDecodeError_Create(const char *encoding, const char *object, Py_ssize_t length, Py_ssize_t start, Py_ssize_t end, const char *reason) +.. c:function:: PyObject* PyUnicodeDecodeError_Create(const char *encoding, const char *object, Py_ssize_t length, Py_ssize_t start, Py_ssize_t end, const char *reason) Create a :class:`UnicodeDecodeError` object with the attributes *encoding*, *object*, *length*, *start*, *end* and *reason*. -.. cfunction:: PyObject* PyUnicodeEncodeError_Create(const char *encoding, const Py_UNICODE *object, Py_ssize_t length, Py_ssize_t start, Py_ssize_t end, const char *reason) +.. c:function:: PyObject* PyUnicodeEncodeError_Create(const char *encoding, const Py_UNICODE *object, Py_ssize_t length, Py_ssize_t start, Py_ssize_t end, const char *reason) Create a :class:`UnicodeEncodeError` object with the attributes *encoding*, *object*, *length*, *start*, *end* and *reason*. -.. cfunction:: PyObject* PyUnicodeTranslateError_Create(const Py_UNICODE *object, Py_ssize_t length, Py_ssize_t start, Py_ssize_t end, const char *reason) +.. c:function:: PyObject* PyUnicodeTranslateError_Create(const Py_UNICODE *object, Py_ssize_t length, Py_ssize_t start, Py_ssize_t end, const char *reason) Create a :class:`UnicodeTranslateError` object with the attributes *object*, *length*, *start*, *end* and *reason*. -.. cfunction:: PyObject* PyUnicodeDecodeError_GetEncoding(PyObject *exc) +.. c:function:: PyObject* PyUnicodeDecodeError_GetEncoding(PyObject *exc) PyObject* PyUnicodeEncodeError_GetEncoding(PyObject *exc) Return the *encoding* attribute of the given exception object. -.. cfunction:: PyObject* PyUnicodeDecodeError_GetObject(PyObject *exc) +.. c:function:: PyObject* PyUnicodeDecodeError_GetObject(PyObject *exc) PyObject* PyUnicodeEncodeError_GetObject(PyObject *exc) PyObject* PyUnicodeTranslateError_GetObject(PyObject *exc) Return the *object* attribute of the given exception object. -.. cfunction:: int PyUnicodeDecodeError_GetStart(PyObject *exc, Py_ssize_t *start) +.. c:function:: int PyUnicodeDecodeError_GetStart(PyObject *exc, Py_ssize_t *start) int PyUnicodeEncodeError_GetStart(PyObject *exc, Py_ssize_t *start) int PyUnicodeTranslateError_GetStart(PyObject *exc, Py_ssize_t *start) @@ -427,14 +427,14 @@ The following functions are used to create and modify Unicode exceptions from C. *\*start*. *start* must not be *NULL*. Return ``0`` on success, ``-1`` on failure. -.. cfunction:: int PyUnicodeDecodeError_SetStart(PyObject *exc, Py_ssize_t start) +.. c:function:: int PyUnicodeDecodeError_SetStart(PyObject *exc, Py_ssize_t start) int PyUnicodeEncodeError_SetStart(PyObject *exc, Py_ssize_t start) int PyUnicodeTranslateError_SetStart(PyObject *exc, Py_ssize_t start) Set the *start* attribute of the given exception object to *start*. Return ``0`` on success, ``-1`` on failure. -.. cfunction:: int PyUnicodeDecodeError_GetEnd(PyObject *exc, Py_ssize_t *end) +.. c:function:: int PyUnicodeDecodeError_GetEnd(PyObject *exc, Py_ssize_t *end) int PyUnicodeEncodeError_GetEnd(PyObject *exc, Py_ssize_t *end) int PyUnicodeTranslateError_GetEnd(PyObject *exc, Py_ssize_t *end) @@ -442,20 +442,20 @@ The following functions are used to create and modify Unicode exceptions from C. *\*end*. *end* must not be *NULL*. Return ``0`` on success, ``-1`` on failure. -.. cfunction:: int PyUnicodeDecodeError_SetEnd(PyObject *exc, Py_ssize_t end) +.. c:function:: int PyUnicodeDecodeError_SetEnd(PyObject *exc, Py_ssize_t end) int PyUnicodeEncodeError_SetEnd(PyObject *exc, Py_ssize_t end) int PyUnicodeTranslateError_SetEnd(PyObject *exc, Py_ssize_t end) Set the *end* attribute of the given exception object to *end*. Return ``0`` on success, ``-1`` on failure. -.. cfunction:: PyObject* PyUnicodeDecodeError_GetReason(PyObject *exc) +.. c:function:: PyObject* PyUnicodeDecodeError_GetReason(PyObject *exc) PyObject* PyUnicodeEncodeError_GetReason(PyObject *exc) PyObject* PyUnicodeTranslateError_GetReason(PyObject *exc) Return the *reason* attribute of the given exception object. -.. cfunction:: int PyUnicodeDecodeError_SetReason(PyObject *exc, const char *reason) +.. c:function:: int PyUnicodeDecodeError_SetReason(PyObject *exc, const char *reason) int PyUnicodeEncodeError_SetReason(PyObject *exc, const char *reason) int PyUnicodeTranslateError_SetReason(PyObject *exc, const char *reason) @@ -471,12 +471,12 @@ level, both in the core and in extension modules. They are needed if the recursive code does not necessarily invoke Python code (which tracks its recursion depth automatically). -.. cfunction:: int Py_EnterRecursiveCall(char *where) +.. c:function:: int Py_EnterRecursiveCall(char *where) Marks a point where a recursive C-level call is about to be performed. If :const:`USE_STACKCHECK` is defined, this function checks if the OS - stack overflowed using :cfunc:`PyOS_CheckStack`. In this is the case, it + stack overflowed using :c:func:`PyOS_CheckStack`. In this is the case, it sets a :exc:`MemoryError` and returns a nonzero value. The function then checks if the recursion limit is reached. If this is the @@ -487,10 +487,10 @@ recursion depth automatically). concatenated to the :exc:`RuntimeError` message caused by the recursion depth limit. -.. cfunction:: void Py_LeaveRecursiveCall() +.. c:function:: void Py_LeaveRecursiveCall() - Ends a :cfunc:`Py_EnterRecursiveCall`. Must be called once for each - *successful* invocation of :cfunc:`Py_EnterRecursiveCall`. + Ends a :c:func:`Py_EnterRecursiveCall`. Must be called once for each + *successful* invocation of :c:func:`Py_EnterRecursiveCall`. .. _standardexceptions: @@ -500,70 +500,70 @@ Standard Exceptions All standard Python exceptions are available as global variables whose names are ``PyExc_`` followed by the Python exception name. These have the type -:ctype:`PyObject\*`; they are all class objects. For completeness, here are all +:c:type:`PyObject\*`; they are all class objects. For completeness, here are all the variables: -+------------------------------------+----------------------------+----------+ -| C Name | Python Name | Notes | -+====================================+============================+==========+ -| :cdata:`PyExc_BaseException` | :exc:`BaseException` | (1), (4) | -+------------------------------------+----------------------------+----------+ -| :cdata:`PyExc_Exception` | :exc:`Exception` | \(1) | -+------------------------------------+----------------------------+----------+ -| :cdata:`PyExc_StandardError` | :exc:`StandardError` | \(1) | -+------------------------------------+----------------------------+----------+ -| :cdata:`PyExc_ArithmeticError` | :exc:`ArithmeticError` | \(1) | -+------------------------------------+----------------------------+----------+ -| :cdata:`PyExc_LookupError` | :exc:`LookupError` | \(1) | -+------------------------------------+----------------------------+----------+ -| :cdata:`PyExc_AssertionError` | :exc:`AssertionError` | | -+------------------------------------+----------------------------+----------+ -| :cdata:`PyExc_AttributeError` | :exc:`AttributeError` | | -+------------------------------------+----------------------------+----------+ -| :cdata:`PyExc_EOFError` | :exc:`EOFError` | | -+------------------------------------+----------------------------+----------+ -| :cdata:`PyExc_EnvironmentError` | :exc:`EnvironmentError` | \(1) | -+------------------------------------+----------------------------+----------+ -| :cdata:`PyExc_FloatingPointError` | :exc:`FloatingPointError` | | -+------------------------------------+----------------------------+----------+ -| :cdata:`PyExc_IOError` | :exc:`IOError` | | -+------------------------------------+----------------------------+----------+ -| :cdata:`PyExc_ImportError` | :exc:`ImportError` | | -+------------------------------------+----------------------------+----------+ -| :cdata:`PyExc_IndexError` | :exc:`IndexError` | | -+------------------------------------+----------------------------+----------+ -| :cdata:`PyExc_KeyError` | :exc:`KeyError` | | -+------------------------------------+----------------------------+----------+ -| :cdata:`PyExc_KeyboardInterrupt` | :exc:`KeyboardInterrupt` | | -+------------------------------------+----------------------------+----------+ -| :cdata:`PyExc_MemoryError` | :exc:`MemoryError` | | -+------------------------------------+----------------------------+----------+ -| :cdata:`PyExc_NameError` | :exc:`NameError` | | -+------------------------------------+----------------------------+----------+ -| :cdata:`PyExc_NotImplementedError` | :exc:`NotImplementedError` | | -+------------------------------------+----------------------------+----------+ -| :cdata:`PyExc_OSError` | :exc:`OSError` | | -+------------------------------------+----------------------------+----------+ -| :cdata:`PyExc_OverflowError` | :exc:`OverflowError` | | -+------------------------------------+----------------------------+----------+ -| :cdata:`PyExc_ReferenceError` | :exc:`ReferenceError` | \(2) | -+------------------------------------+----------------------------+----------+ -| :cdata:`PyExc_RuntimeError` | :exc:`RuntimeError` | | -+------------------------------------+----------------------------+----------+ -| :cdata:`PyExc_SyntaxError` | :exc:`SyntaxError` | | -+------------------------------------+----------------------------+----------+ -| :cdata:`PyExc_SystemError` | :exc:`SystemError` | | -+------------------------------------+----------------------------+----------+ -| :cdata:`PyExc_SystemExit` | :exc:`SystemExit` | | -+------------------------------------+----------------------------+----------+ -| :cdata:`PyExc_TypeError` | :exc:`TypeError` | | -+------------------------------------+----------------------------+----------+ -| :cdata:`PyExc_ValueError` | :exc:`ValueError` | | -+------------------------------------+----------------------------+----------+ -| :cdata:`PyExc_WindowsError` | :exc:`WindowsError` | \(3) | -+------------------------------------+----------------------------+----------+ -| :cdata:`PyExc_ZeroDivisionError` | :exc:`ZeroDivisionError` | | -+------------------------------------+----------------------------+----------+ ++-------------------------------------+----------------------------+----------+ +| C Name | Python Name | Notes | ++=====================================+============================+==========+ +| :c:data:`PyExc_BaseException` | :exc:`BaseException` | (1), (4) | ++-------------------------------------+----------------------------+----------+ +| :c:data:`PyExc_Exception` | :exc:`Exception` | \(1) | ++-------------------------------------+----------------------------+----------+ +| :c:data:`PyExc_StandardError` | :exc:`StandardError` | \(1) | ++-------------------------------------+----------------------------+----------+ +| :c:data:`PyExc_ArithmeticError` | :exc:`ArithmeticError` | \(1) | ++-------------------------------------+----------------------------+----------+ +| :c:data:`PyExc_LookupError` | :exc:`LookupError` | \(1) | ++-------------------------------------+----------------------------+----------+ +| :c:data:`PyExc_AssertionError` | :exc:`AssertionError` | | ++-------------------------------------+----------------------------+----------+ +| :c:data:`PyExc_AttributeError` | :exc:`AttributeError` | | ++-------------------------------------+----------------------------+----------+ +| :c:data:`PyExc_EOFError` | :exc:`EOFError` | | ++-------------------------------------+----------------------------+----------+ +| :c:data:`PyExc_EnvironmentError` | :exc:`EnvironmentError` | \(1) | ++-------------------------------------+----------------------------+----------+ +| :c:data:`PyExc_FloatingPointError` | :exc:`FloatingPointError` | | ++-------------------------------------+----------------------------+----------+ +| :c:data:`PyExc_IOError` | :exc:`IOError` | | ++-------------------------------------+----------------------------+----------+ +| :c:data:`PyExc_ImportError` | :exc:`ImportError` | | ++-------------------------------------+----------------------------+----------+ +| :c:data:`PyExc_IndexError` | :exc:`IndexError` | | ++-------------------------------------+----------------------------+----------+ +| :c:data:`PyExc_KeyError` | :exc:`KeyError` | | ++-------------------------------------+----------------------------+----------+ +| :c:data:`PyExc_KeyboardInterrupt` | :exc:`KeyboardInterrupt` | | ++-------------------------------------+----------------------------+----------+ +| :c:data:`PyExc_MemoryError` | :exc:`MemoryError` | | ++-------------------------------------+----------------------------+----------+ +| :c:data:`PyExc_NameError` | :exc:`NameError` | | ++-------------------------------------+----------------------------+----------+ +| :c:data:`PyExc_NotImplementedError` | :exc:`NotImplementedError` | | ++-------------------------------------+----------------------------+----------+ +| :c:data:`PyExc_OSError` | :exc:`OSError` | | ++-------------------------------------+----------------------------+----------+ +| :c:data:`PyExc_OverflowError` | :exc:`OverflowError` | | ++-------------------------------------+----------------------------+----------+ +| :c:data:`PyExc_ReferenceError` | :exc:`ReferenceError` | \(2) | ++-------------------------------------+----------------------------+----------+ +| :c:data:`PyExc_RuntimeError` | :exc:`RuntimeError` | | ++-------------------------------------+----------------------------+----------+ +| :c:data:`PyExc_SyntaxError` | :exc:`SyntaxError` | | ++-------------------------------------+----------------------------+----------+ +| :c:data:`PyExc_SystemError` | :exc:`SystemError` | | ++-------------------------------------+----------------------------+----------+ +| :c:data:`PyExc_SystemExit` | :exc:`SystemExit` | | ++-------------------------------------+----------------------------+----------+ +| :c:data:`PyExc_TypeError` | :exc:`TypeError` | | ++-------------------------------------+----------------------------+----------+ +| :c:data:`PyExc_ValueError` | :exc:`ValueError` | | ++-------------------------------------+----------------------------+----------+ +| :c:data:`PyExc_WindowsError` | :exc:`WindowsError` | \(3) | ++-------------------------------------+----------------------------+----------+ +| :c:data:`PyExc_ZeroDivisionError` | :exc:`ZeroDivisionError` | | ++-------------------------------------+----------------------------+----------+ .. index:: single: PyExc_BaseException diff --git a/Doc/c-api/file.rst b/Doc/c-api/file.rst index 93f6b64..20a7a60 100644 --- a/Doc/c-api/file.rst +++ b/Doc/c-api/file.rst @@ -7,79 +7,79 @@ File Objects .. index:: object: file -Python's built-in file objects are implemented entirely on the :ctype:`FILE\*` +Python's built-in file objects are implemented entirely on the :c:type:`FILE\*` support from the C standard library. This is an implementation detail and may change in future releases of Python. -.. ctype:: PyFileObject +.. c:type:: PyFileObject - This subtype of :ctype:`PyObject` represents a Python file object. + This subtype of :c:type:`PyObject` represents a Python file object. -.. cvar:: PyTypeObject PyFile_Type +.. c:var:: PyTypeObject PyFile_Type .. index:: single: FileType (in module types) - This instance of :ctype:`PyTypeObject` represents the Python file type. This is + This instance of :c:type:`PyTypeObject` represents the Python file type. This is exposed to Python programs as ``file`` and ``types.FileType``. -.. cfunction:: int PyFile_Check(PyObject *p) +.. c:function:: int PyFile_Check(PyObject *p) - Return true if its argument is a :ctype:`PyFileObject` or a subtype of - :ctype:`PyFileObject`. + Return true if its argument is a :c:type:`PyFileObject` or a subtype of + :c:type:`PyFileObject`. .. versionchanged:: 2.2 Allowed subtypes to be accepted. -.. cfunction:: int PyFile_CheckExact(PyObject *p) +.. c:function:: int PyFile_CheckExact(PyObject *p) - Return true if its argument is a :ctype:`PyFileObject`, but not a subtype of - :ctype:`PyFileObject`. + Return true if its argument is a :c:type:`PyFileObject`, but not a subtype of + :c:type:`PyFileObject`. .. versionadded:: 2.2 -.. cfunction:: PyObject* PyFile_FromString(char *filename, char *mode) +.. c:function:: PyObject* PyFile_FromString(char *filename, char *mode) .. index:: single: fopen() On success, return a new file object that is opened on the file given by *filename*, with a file mode given by *mode*, where *mode* has the same - semantics as the standard C routine :cfunc:`fopen`. On failure, return *NULL*. + semantics as the standard C routine :c:func:`fopen`. On failure, return *NULL*. -.. cfunction:: PyObject* PyFile_FromFile(FILE *fp, char *name, char *mode, int (*close)(FILE*)) +.. c:function:: PyObject* PyFile_FromFile(FILE *fp, char *name, char *mode, int (*close)(FILE*)) - Create a new :ctype:`PyFileObject` from the already-open standard C file + Create a new :c:type:`PyFileObject` from the already-open standard C file pointer, *fp*. The function *close* will be called when the file should be closed. Return *NULL* and close the file using *close* on failure. *close* is optional and can be set to *NULL*. -.. cfunction:: FILE* PyFile_AsFile(PyObject \*p) +.. c:function:: FILE* PyFile_AsFile(PyObject \*p) - Return the file object associated with *p* as a :ctype:`FILE\*`. + Return the file object associated with *p* as a :c:type:`FILE\*`. - If the caller will ever use the returned :ctype:`FILE\*` object while - the :term:`GIL` is released it must also call the :cfunc:`PyFile_IncUseCount` and - :cfunc:`PyFile_DecUseCount` functions described below as appropriate. + If the caller will ever use the returned :c:type:`FILE\*` object while + the :term:`GIL` is released it must also call the :c:func:`PyFile_IncUseCount` and + :c:func:`PyFile_DecUseCount` functions described below as appropriate. -.. cfunction:: void PyFile_IncUseCount(PyFileObject \*p) +.. c:function:: void PyFile_IncUseCount(PyFileObject \*p) Increments the PyFileObject's internal use count to indicate - that the underlying :ctype:`FILE\*` is being used. + that the underlying :c:type:`FILE\*` is being used. This prevents Python from calling f_close() on it from another thread. - Callers of this must call :cfunc:`PyFile_DecUseCount` when they are - finished with the :ctype:`FILE\*`. Otherwise the file object will + Callers of this must call :c:func:`PyFile_DecUseCount` when they are + finished with the :c:type:`FILE\*`. Otherwise the file object will never be closed by Python. The :term:`GIL` must be held while calling this function. - The suggested use is to call this after :cfunc:`PyFile_AsFile` and before + The suggested use is to call this after :c:func:`PyFile_AsFile` and before you release the GIL:: FILE *fp = PyFile_AsFile(p); @@ -94,11 +94,11 @@ change in future releases of Python. .. versionadded:: 2.6 -.. cfunction:: void PyFile_DecUseCount(PyFileObject \*p) +.. c:function:: void PyFile_DecUseCount(PyFileObject \*p) Decrements the PyFileObject's internal unlocked_count member to - indicate that the caller is done with its own use of the :ctype:`FILE\*`. - This may only be called to undo a prior call to :cfunc:`PyFile_IncUseCount`. + indicate that the caller is done with its own use of the :c:type:`FILE\*`. + This may only be called to undo a prior call to :c:func:`PyFile_IncUseCount`. The :term:`GIL` must be held while calling this function (see the example above). @@ -106,7 +106,7 @@ change in future releases of Python. .. versionadded:: 2.6 -.. cfunction:: PyObject* PyFile_GetLine(PyObject *p, int n) +.. c:function:: PyObject* PyFile_GetLine(PyObject *p, int n) .. index:: single: EOFError (built-in exception) @@ -120,20 +120,20 @@ change in future releases of Python. raised if the end of the file is reached immediately. -.. cfunction:: PyObject* PyFile_Name(PyObject *p) +.. c:function:: PyObject* PyFile_Name(PyObject *p) Return the name of the file specified by *p* as a string object. -.. cfunction:: void PyFile_SetBufSize(PyFileObject *p, int n) +.. c:function:: void PyFile_SetBufSize(PyFileObject *p, int n) .. index:: single: setvbuf() - Available on systems with :cfunc:`setvbuf` only. This should only be called + Available on systems with :c:func:`setvbuf` only. This should only be called immediately after file object creation. -.. cfunction:: int PyFile_SetEncoding(PyFileObject *p, const char *enc) +.. c:function:: int PyFile_SetEncoding(PyFileObject *p, const char *enc) Set the file's encoding for Unicode output to *enc*. Return 1 on success and 0 on failure. @@ -141,7 +141,7 @@ change in future releases of Python. .. versionadded:: 2.3 -.. cfunction:: int PyFile_SetEncodingAndErrors(PyFileObject *p, const char *enc, *errors) +.. c:function:: int PyFile_SetEncodingAndErrors(PyFileObject *p, const char *enc, *errors) Set the file's encoding for Unicode output to *enc*, and its error mode to *err*. Return 1 on success and 0 on failure. @@ -149,7 +149,7 @@ change in future releases of Python. .. versionadded:: 2.6 -.. cfunction:: int PyFile_SoftSpace(PyObject *p, int newflag) +.. c:function:: int PyFile_SoftSpace(PyObject *p, int newflag) .. index:: single: softspace (file attribute) @@ -163,7 +163,7 @@ change in future releases of Python. but doing so should not be needed. -.. cfunction:: int PyFile_WriteObject(PyObject *obj, PyObject *p, int flags) +.. c:function:: int PyFile_WriteObject(PyObject *obj, PyObject *p, int flags) .. index:: single: Py_PRINT_RAW @@ -173,7 +173,7 @@ change in future releases of Python. appropriate exception will be set. -.. cfunction:: int PyFile_WriteString(const char *s, PyObject *p) +.. c:function:: int PyFile_WriteString(const char *s, PyObject *p) Write string *s* to file object *p*. Return ``0`` on success or ``-1`` on failure; the appropriate exception will be set. diff --git a/Doc/c-api/float.rst b/Doc/c-api/float.rst index d92f155..3aa7d18 100644 --- a/Doc/c-api/float.rst +++ b/Doc/c-api/float.rst @@ -8,64 +8,64 @@ Floating Point Objects .. index:: object: floating point -.. ctype:: PyFloatObject +.. c:type:: PyFloatObject - This subtype of :ctype:`PyObject` represents a Python floating point object. + This subtype of :c:type:`PyObject` represents a Python floating point object. -.. cvar:: PyTypeObject PyFloat_Type +.. c:var:: PyTypeObject PyFloat_Type .. index:: single: FloatType (in modules types) - This instance of :ctype:`PyTypeObject` represents the Python floating point + This instance of :c:type:`PyTypeObject` represents the Python floating point type. This is the same object as ``float`` and ``types.FloatType``. -.. cfunction:: int PyFloat_Check(PyObject *p) +.. c:function:: int PyFloat_Check(PyObject *p) - Return true if its argument is a :ctype:`PyFloatObject` or a subtype of - :ctype:`PyFloatObject`. + Return true if its argument is a :c:type:`PyFloatObject` or a subtype of + :c:type:`PyFloatObject`. .. versionchanged:: 2.2 Allowed subtypes to be accepted. -.. cfunction:: int PyFloat_CheckExact(PyObject *p) +.. c:function:: int PyFloat_CheckExact(PyObject *p) - Return true if its argument is a :ctype:`PyFloatObject`, but not a subtype of - :ctype:`PyFloatObject`. + Return true if its argument is a :c:type:`PyFloatObject`, but not a subtype of + :c:type:`PyFloatObject`. .. versionadded:: 2.2 -.. cfunction:: PyObject* PyFloat_FromString(PyObject *str, char **pend) +.. c:function:: PyObject* PyFloat_FromString(PyObject *str, char **pend) - Create a :ctype:`PyFloatObject` object based on the string value in *str*, or + Create a :c:type:`PyFloatObject` object based on the string value in *str*, or *NULL* on failure. The *pend* argument is ignored. It remains only for backward compatibility. -.. cfunction:: PyObject* PyFloat_FromDouble(double v) +.. c:function:: PyObject* PyFloat_FromDouble(double v) - Create a :ctype:`PyFloatObject` object from *v*, or *NULL* on failure. + Create a :c:type:`PyFloatObject` object from *v*, or *NULL* on failure. -.. cfunction:: double PyFloat_AsDouble(PyObject *pyfloat) +.. c:function:: double PyFloat_AsDouble(PyObject *pyfloat) - Return a C :ctype:`double` representation of the contents of *pyfloat*. If + Return a C :c:type:`double` representation of the contents of *pyfloat*. If *pyfloat* is not a Python floating point object but has a :meth:`__float__` method, this method will first be called to convert *pyfloat* into a float. This method returns ``-1.0`` upon failure, so one should call - :cfunc:`PyErr_Occurred` to check for errors. + :c:func:`PyErr_Occurred` to check for errors. -.. cfunction:: double PyFloat_AS_DOUBLE(PyObject *pyfloat) +.. c:function:: double PyFloat_AS_DOUBLE(PyObject *pyfloat) - Return a C :ctype:`double` representation of the contents of *pyfloat*, but + Return a C :c:type:`double` representation of the contents of *pyfloat*, but without error checking. -.. cfunction:: PyObject* PyFloat_GetInfo(void) +.. c:function:: PyObject* PyFloat_GetInfo(void) Return a structseq instance which contains information about the precision, minimum and maximum values of a float. It's a thin wrapper @@ -74,21 +74,21 @@ Floating Point Objects .. versionadded:: 2.6 -.. cfunction:: double PyFloat_GetMax() +.. c:function:: double PyFloat_GetMax() - Return the maximum representable finite float *DBL_MAX* as C :ctype:`double`. + Return the maximum representable finite float *DBL_MAX* as C :c:type:`double`. .. versionadded:: 2.6 -.. cfunction:: double PyFloat_GetMin() +.. c:function:: double PyFloat_GetMin() - Return the minimum normalized positive float *DBL_MIN* as C :ctype:`double`. + Return the minimum normalized positive float *DBL_MIN* as C :c:type:`double`. .. versionadded:: 2.6 -.. cfunction:: int PyFloat_ClearFreeList() +.. c:function:: int PyFloat_ClearFreeList() Clear the float free list. Return the number of items that could not be freed. @@ -96,7 +96,7 @@ Floating Point Objects .. versionadded:: 2.6 -.. cfunction:: void PyFloat_AsString(char *buf, PyFloatObject *v) +.. c:function:: void PyFloat_AsString(char *buf, PyFloatObject *v) Convert the argument *v* to a string, using the same rules as :func:`str`. The length of *buf* should be at least 100. @@ -108,7 +108,7 @@ Floating Point Objects Use :func:`PyObject_Str` or :func:`PyOS_double_to_string` instead. -.. cfunction:: void PyFloat_AsReprString(char *buf, PyFloatObject *v) +.. c:function:: void PyFloat_AsReprString(char *buf, PyFloatObject *v) Same as PyFloat_AsString, except uses the same rules as :func:`repr`. The length of *buf* should be at least 100. diff --git a/Doc/c-api/function.rst b/Doc/c-api/function.rst index e9ed2ab..66f8675 100644 --- a/Doc/c-api/function.rst +++ b/Doc/c-api/function.rst @@ -10,26 +10,26 @@ Function Objects There are a few functions specific to Python functions. -.. ctype:: PyFunctionObject +.. c:type:: PyFunctionObject The C structure used for functions. -.. cvar:: PyTypeObject PyFunction_Type +.. c:var:: PyTypeObject PyFunction_Type .. index:: single: MethodType (in module types) - This is an instance of :ctype:`PyTypeObject` and represents the Python function + This is an instance of :c:type:`PyTypeObject` and represents the Python function type. It is exposed to Python programmers as ``types.FunctionType``. -.. cfunction:: int PyFunction_Check(PyObject *o) +.. c:function:: int PyFunction_Check(PyObject *o) - Return true if *o* is a function object (has type :cdata:`PyFunction_Type`). + Return true if *o* is a function object (has type :c:data:`PyFunction_Type`). The parameter must not be *NULL*. -.. cfunction:: PyObject* PyFunction_New(PyObject *code, PyObject *globals) +.. c:function:: PyObject* PyFunction_New(PyObject *code, PyObject *globals) Return a new function object associated with the code object *code*. *globals* must be a dictionary with the global variables accessible to the function. @@ -38,30 +38,30 @@ There are a few functions specific to Python functions. object, the argument defaults and closure are set to *NULL*. -.. cfunction:: PyObject* PyFunction_GetCode(PyObject *op) +.. c:function:: PyObject* PyFunction_GetCode(PyObject *op) Return the code object associated with the function object *op*. -.. cfunction:: PyObject* PyFunction_GetGlobals(PyObject *op) +.. c:function:: PyObject* PyFunction_GetGlobals(PyObject *op) Return the globals dictionary associated with the function object *op*. -.. cfunction:: PyObject* PyFunction_GetModule(PyObject *op) +.. c:function:: PyObject* PyFunction_GetModule(PyObject *op) Return the *__module__* attribute of the function object *op*. This is normally a string containing the module name, but can be set to any other object by Python code. -.. cfunction:: PyObject* PyFunction_GetDefaults(PyObject *op) +.. c:function:: PyObject* PyFunction_GetDefaults(PyObject *op) Return the argument default values of the function object *op*. This can be a tuple of arguments or *NULL*. -.. cfunction:: int PyFunction_SetDefaults(PyObject *op, PyObject *defaults) +.. c:function:: int PyFunction_SetDefaults(PyObject *op, PyObject *defaults) Set the argument default values for the function object *op*. *defaults* must be *Py_None* or a tuple. @@ -69,13 +69,13 @@ There are a few functions specific to Python functions. Raises :exc:`SystemError` and returns ``-1`` on failure. -.. cfunction:: PyObject* PyFunction_GetClosure(PyObject *op) +.. c:function:: PyObject* PyFunction_GetClosure(PyObject *op) Return the closure associated with the function object *op*. This can be *NULL* or a tuple of cell objects. -.. cfunction:: int PyFunction_SetClosure(PyObject *op, PyObject *closure) +.. c:function:: int PyFunction_SetClosure(PyObject *op, PyObject *closure) Set the closure associated with the function object *op*. *closure* must be *Py_None* or a tuple of cell objects. diff --git a/Doc/c-api/gcsupport.rst b/Doc/c-api/gcsupport.rst index 4517929..2a4fda4 100644 --- a/Doc/c-api/gcsupport.rst +++ b/Doc/c-api/gcsupport.rst @@ -30,40 +30,40 @@ include the :const:`Py_TPFLAGS_HAVE_GC` and provide an implementation of the Constructors for container types must conform to two rules: -#. The memory for the object must be allocated using :cfunc:`PyObject_GC_New` - or :cfunc:`PyObject_GC_NewVar`. +#. The memory for the object must be allocated using :c:func:`PyObject_GC_New` + or :c:func:`PyObject_GC_NewVar`. #. Once all the fields which may contain references to other containers are - initialized, it must call :cfunc:`PyObject_GC_Track`. + initialized, it must call :c:func:`PyObject_GC_Track`. -.. cfunction:: TYPE* PyObject_GC_New(TYPE, PyTypeObject *type) +.. c:function:: TYPE* PyObject_GC_New(TYPE, PyTypeObject *type) - Analogous to :cfunc:`PyObject_New` but for container objects with the + Analogous to :c:func:`PyObject_New` but for container objects with the :const:`Py_TPFLAGS_HAVE_GC` flag set. -.. cfunction:: TYPE* PyObject_GC_NewVar(TYPE, PyTypeObject *type, Py_ssize_t size) +.. c:function:: TYPE* PyObject_GC_NewVar(TYPE, PyTypeObject *type, Py_ssize_t size) - Analogous to :cfunc:`PyObject_NewVar` but for container objects with the + Analogous to :c:func:`PyObject_NewVar` but for container objects with the :const:`Py_TPFLAGS_HAVE_GC` flag set. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *size*. This might require + This function used an :c:type:`int` type for *size*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: TYPE* PyObject_GC_Resize(TYPE, PyVarObject *op, Py_ssize_t newsize) +.. c:function:: TYPE* PyObject_GC_Resize(TYPE, PyVarObject *op, Py_ssize_t newsize) - Resize an object allocated by :cfunc:`PyObject_NewVar`. Returns the + Resize an object allocated by :c:func:`PyObject_NewVar`. Returns the resized object or *NULL* on failure. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *newsize*. This might + This function used an :c:type:`int` type for *newsize*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: void PyObject_GC_Track(PyObject *op) +.. c:function:: void PyObject_GC_Track(PyObject *op) Adds the object *op* to the set of container objects tracked by the collector. The collector can run at unexpected times so objects must be @@ -72,44 +72,44 @@ Constructors for container types must conform to two rules: end of the constructor. -.. cfunction:: void _PyObject_GC_TRACK(PyObject *op) +.. c:function:: void _PyObject_GC_TRACK(PyObject *op) - A macro version of :cfunc:`PyObject_GC_Track`. It should not be used for + A macro version of :c:func:`PyObject_GC_Track`. It should not be used for extension modules. Similarly, the deallocator for the object must conform to a similar pair of rules: #. Before fields which refer to other containers are invalidated, - :cfunc:`PyObject_GC_UnTrack` must be called. + :c:func:`PyObject_GC_UnTrack` must be called. -#. The object's memory must be deallocated using :cfunc:`PyObject_GC_Del`. +#. The object's memory must be deallocated using :c:func:`PyObject_GC_Del`. -.. cfunction:: void PyObject_GC_Del(void *op) +.. c:function:: void PyObject_GC_Del(void *op) - Releases memory allocated to an object using :cfunc:`PyObject_GC_New` or - :cfunc:`PyObject_GC_NewVar`. + Releases memory allocated to an object using :c:func:`PyObject_GC_New` or + :c:func:`PyObject_GC_NewVar`. -.. cfunction:: void PyObject_GC_UnTrack(void *op) +.. c:function:: void PyObject_GC_UnTrack(void *op) Remove the object *op* from the set of container objects tracked by the - collector. Note that :cfunc:`PyObject_GC_Track` can be called again on + collector. Note that :c:func:`PyObject_GC_Track` can be called again on this object to add it back to the set of tracked objects. The deallocator (:attr:`tp_dealloc` handler) should call this for the object before any of the fields used by the :attr:`tp_traverse` handler become invalid. -.. cfunction:: void _PyObject_GC_UNTRACK(PyObject *op) +.. c:function:: void _PyObject_GC_UNTRACK(PyObject *op) - A macro version of :cfunc:`PyObject_GC_UnTrack`. It should not be used for + A macro version of :c:func:`PyObject_GC_UnTrack`. It should not be used for extension modules. The :attr:`tp_traverse` handler accepts a function parameter of this type: -.. ctype:: int (*visitproc)(PyObject *object, void *arg) +.. c:type:: int (*visitproc)(PyObject *object, void *arg) Type of the visitor function passed to the :attr:`tp_traverse` handler. The function should be called with an object to traverse as *object* and @@ -121,7 +121,7 @@ The :attr:`tp_traverse` handler accepts a function parameter of this type: The :attr:`tp_traverse` handler must have the following type: -.. ctype:: int (*traverseproc)(PyObject *self, visitproc visit, void *arg) +.. c:type:: int (*traverseproc)(PyObject *self, visitproc visit, void *arg) Traversal function for a container object. Implementations must call the *visit* function for each object directly contained by *self*, with the @@ -130,12 +130,12 @@ The :attr:`tp_traverse` handler must have the following type: object argument. If *visit* returns a non-zero value that value should be returned immediately. -To simplify writing :attr:`tp_traverse` handlers, a :cfunc:`Py_VISIT` macro is +To simplify writing :attr:`tp_traverse` handlers, a :c:func:`Py_VISIT` macro is provided. In order to use this macro, the :attr:`tp_traverse` implementation must name its arguments exactly *visit* and *arg*: -.. cfunction:: void Py_VISIT(PyObject *o) +.. c:function:: void Py_VISIT(PyObject *o) Call the *visit* callback, with arguments *o* and *arg*. If *visit* returns a non-zero value, then return it. Using this macro, :attr:`tp_traverse` @@ -151,15 +151,15 @@ must name its arguments exactly *visit* and *arg*: .. versionadded:: 2.4 -The :attr:`tp_clear` handler must be of the :ctype:`inquiry` type, or *NULL* +The :attr:`tp_clear` handler must be of the :c:type:`inquiry` type, or *NULL* if the object is immutable. -.. ctype:: int (*inquiry)(PyObject *self) +.. c:type:: int (*inquiry)(PyObject *self) Drop references that may have created reference cycles. Immutable objects do not have to define this method since they can never directly create reference cycles. Note that the object must still be valid after calling - this method (don't just call :cfunc:`Py_DECREF` on a reference). The + this method (don't just call :c:func:`Py_DECREF` on a reference). The collector will call this method if it detects that this object is involved in a reference cycle. diff --git a/Doc/c-api/gen.rst b/Doc/c-api/gen.rst index 0d3789a..33cd27a 100644 --- a/Doc/c-api/gen.rst +++ b/Doc/c-api/gen.rst @@ -7,31 +7,31 @@ Generator Objects Generator objects are what Python uses to implement generator iterators. They are normally created by iterating over a function that yields values, rather -than explicitly calling :cfunc:`PyGen_New`. +than explicitly calling :c:func:`PyGen_New`. -.. ctype:: PyGenObject +.. c:type:: PyGenObject The C structure used for generator objects. -.. cvar:: PyTypeObject PyGen_Type +.. c:var:: PyTypeObject PyGen_Type The type object corresponding to generator objects -.. cfunction:: int PyGen_Check(ob) +.. c:function:: int PyGen_Check(ob) Return true if *ob* is a generator object; *ob* must not be *NULL*. -.. cfunction:: int PyGen_CheckExact(ob) +.. c:function:: int PyGen_CheckExact(ob) Return true if *ob*'s type is *PyGen_Type* is a generator object; *ob* must not be *NULL*. -.. cfunction:: PyObject* PyGen_New(PyFrameObject *frame) +.. c:function:: PyObject* PyGen_New(PyFrameObject *frame) Create and return a new generator object based on the *frame* object. A reference to *frame* is stolen by this function. The parameter must not be diff --git a/Doc/c-api/import.rst b/Doc/c-api/import.rst index 3da1415..1929041 100644 --- a/Doc/c-api/import.rst +++ b/Doc/c-api/import.rst @@ -6,14 +6,14 @@ Importing Modules ================= -.. cfunction:: PyObject* PyImport_ImportModule(const char *name) +.. c:function:: PyObject* PyImport_ImportModule(const char *name) .. index:: single: package variable; __all__ single: __all__ (package variable) single: modules (in module sys) - This is a simplified interface to :cfunc:`PyImport_ImportModuleEx` below, + This is a simplified interface to :c:func:`PyImport_ImportModuleEx` below, leaving the *globals* and *locals* arguments set to *NULL* and *level* set to 0. When the *name* argument contains a dot (when it specifies a submodule of a package), the @@ -34,20 +34,20 @@ Importing Modules Always uses absolute imports. -.. cfunction:: PyObject* PyImport_ImportModuleNoBlock(const char *name) +.. c:function:: PyObject* PyImport_ImportModuleNoBlock(const char *name) - This version of :cfunc:`PyImport_ImportModule` does not block. It's intended + This version of :c:func:`PyImport_ImportModule` does not block. It's intended to be used in C functions that import other modules to execute a function. The import may block if another thread holds the import lock. The function - :cfunc:`PyImport_ImportModuleNoBlock` never blocks. It first tries to fetch - the module from sys.modules and falls back to :cfunc:`PyImport_ImportModule` + :c:func:`PyImport_ImportModuleNoBlock` never blocks. It first tries to fetch + the module from sys.modules and falls back to :c:func:`PyImport_ImportModule` unless the lock is held, in which case the function will raise an :exc:`ImportError`. .. versionadded:: 2.6 -.. cfunction:: PyObject* PyImport_ImportModuleEx(char *name, PyObject *globals, PyObject *locals, PyObject *fromlist) +.. c:function:: PyObject* PyImport_ImportModuleEx(char *name, PyObject *globals, PyObject *locals, PyObject *fromlist) .. index:: builtin: __import__ @@ -65,11 +65,11 @@ Importing Modules Failing imports remove incomplete module objects. .. versionchanged:: 2.6 - The function is an alias for :cfunc:`PyImport_ImportModuleLevel` with + The function is an alias for :c:func:`PyImport_ImportModuleLevel` with -1 as level, meaning relative import. -.. cfunction:: PyObject* PyImport_ImportModuleLevel(char *name, PyObject *globals, PyObject *locals, PyObject *fromlist, int level) +.. c:function:: PyObject* PyImport_ImportModuleLevel(char *name, PyObject *globals, PyObject *locals, PyObject *fromlist, int level) Import a module. This is best described by referring to the built-in Python function :func:`__import__`, as the standard :func:`__import__` function calls @@ -83,7 +83,7 @@ Importing Modules .. versionadded:: 2.5 -.. cfunction:: PyObject* PyImport_Import(PyObject *name) +.. c:function:: PyObject* PyImport_Import(PyObject *name) .. index:: module: rexec @@ -98,7 +98,7 @@ Importing Modules Always uses absolute imports. -.. cfunction:: PyObject* PyImport_ReloadModule(PyObject *m) +.. c:function:: PyObject* PyImport_ReloadModule(PyObject *m) .. index:: builtin: reload @@ -108,7 +108,7 @@ Importing Modules with an exception set on failure (the module still exists in this case). -.. cfunction:: PyObject* PyImport_AddModule(const char *name) +.. c:function:: PyObject* PyImport_AddModule(const char *name) Return the module object corresponding to a module name. The *name* argument may be of the form ``package.module``. First check the modules dictionary if @@ -118,12 +118,12 @@ Importing Modules .. note:: This function does not load or import the module; if the module wasn't already - loaded, you will get an empty module object. Use :cfunc:`PyImport_ImportModule` + loaded, you will get an empty module object. Use :c:func:`PyImport_ImportModule` or one of its variants to import a module. Package structures implied by a dotted name for *name* are not created if not already present. -.. cfunction:: PyObject* PyImport_ExecCodeModule(char *name, PyObject *co) +.. c:function:: PyObject* PyImport_ExecCodeModule(char *name, PyObject *co) .. index:: builtin: compile @@ -133,7 +133,7 @@ Importing Modules or *NULL* with an exception set if an error occurred. Before Python 2.4, the module could still be created in error cases. Starting with Python 2.4, *name* is removed from :attr:`sys.modules` in error cases, and even if *name* was already - in :attr:`sys.modules` on entry to :cfunc:`PyImport_ExecCodeModule`. Leaving + in :attr:`sys.modules` on entry to :c:func:`PyImport_ExecCodeModule`. Leaving incompletely initialized modules in :attr:`sys.modules` is dangerous, as imports of such modules have no way to know that the module object is an unknown (and probably damaged with respect to the module author's intents) state. @@ -142,7 +142,7 @@ Importing Modules :cmember:`co_filename`. This function will reload the module if it was already imported. See - :cfunc:`PyImport_ReloadModule` for the intended way to reload a module. + :c:func:`PyImport_ReloadModule` for the intended way to reload a module. If *name* points to a dotted name of the form ``package.module``, any package structures not already created will still not be created. @@ -151,26 +151,26 @@ Importing Modules *name* is removed from :attr:`sys.modules` in error cases. -.. cfunction:: PyObject* PyImport_ExecCodeModuleEx(char *name, PyObject *co, char *pathname) +.. c:function:: PyObject* PyImport_ExecCodeModuleEx(char *name, PyObject *co, char *pathname) - Like :cfunc:`PyImport_ExecCodeModule`, but the :attr:`__file__` attribute of + Like :c:func:`PyImport_ExecCodeModule`, but the :attr:`__file__` attribute of the module object is set to *pathname* if it is non-``NULL``. -.. cfunction:: long PyImport_GetMagicNumber() +.. c:function:: long PyImport_GetMagicNumber() Return the magic number for Python bytecode files (a.k.a. :file:`.pyc` and :file:`.pyo` files). The magic number should be present in the first four bytes of the bytecode file, in little-endian byte order. -.. cfunction:: PyObject* PyImport_GetModuleDict() +.. c:function:: PyObject* PyImport_GetModuleDict() Return the dictionary used for the module administration (a.k.a. ``sys.modules``). Note that this is a per-interpreter variable. -.. cfunction:: PyObject* PyImport_GetImporter(PyObject *path) +.. c:function:: PyObject* PyImport_GetImporter(PyObject *path) Return an importer object for a :data:`sys.path`/:attr:`pkg.__path__` item *path*, possibly by fetching it from the :data:`sys.path_importer_cache` @@ -183,41 +183,41 @@ Importing Modules .. versionadded:: 2.6 -.. cfunction:: void _PyImport_Init() +.. c:function:: void _PyImport_Init() Initialize the import mechanism. For internal use only. -.. cfunction:: void PyImport_Cleanup() +.. c:function:: void PyImport_Cleanup() Empty the module table. For internal use only. -.. cfunction:: void _PyImport_Fini() +.. c:function:: void _PyImport_Fini() Finalize the import mechanism. For internal use only. -.. cfunction:: PyObject* _PyImport_FindExtension(char *, char *) +.. c:function:: PyObject* _PyImport_FindExtension(char *, char *) For internal use only. -.. cfunction:: PyObject* _PyImport_FixupExtension(char *, char *) +.. c:function:: PyObject* _PyImport_FixupExtension(char *, char *) For internal use only. -.. cfunction:: int PyImport_ImportFrozenModule(char *name) +.. c:function:: int PyImport_ImportFrozenModule(char *name) Load a frozen module named *name*. Return ``1`` for success, ``0`` if the module is not found, and ``-1`` with an exception set if the initialization failed. To access the imported module on a successful load, use - :cfunc:`PyImport_ImportModule`. (Note the misnomer --- this function would + :c:func:`PyImport_ImportModule`. (Note the misnomer --- this function would reload the module if it was already imported.) -.. ctype:: struct _frozen +.. c:type:: struct _frozen .. index:: single: freeze utility @@ -233,30 +233,30 @@ Importing Modules }; -.. cvar:: struct _frozen* PyImport_FrozenModules +.. c:var:: struct _frozen* PyImport_FrozenModules - This pointer is initialized to point to an array of :ctype:`struct _frozen` + This pointer is initialized to point to an array of :c:type:`struct _frozen` records, terminated by one whose members are all *NULL* or zero. When a frozen module is imported, it is searched in this table. Third-party code could play tricks with this to provide a dynamically created collection of frozen modules. -.. cfunction:: int PyImport_AppendInittab(const char *name, void (*initfunc)(void)) +.. c:function:: int PyImport_AppendInittab(const char *name, void (*initfunc)(void)) Add a single module to the existing table of built-in modules. This is a - convenience wrapper around :cfunc:`PyImport_ExtendInittab`, returning ``-1`` if + convenience wrapper around :c:func:`PyImport_ExtendInittab`, returning ``-1`` if the table could not be extended. The new module can be imported by the name *name*, and uses the function *initfunc* as the initialization function called on the first attempted import. This should be called before - :cfunc:`Py_Initialize`. + :c:func:`Py_Initialize`. -.. ctype:: struct _inittab +.. c:type:: struct _inittab Structure describing a single entry in the list of built-in modules. Each of these structures gives the name and initialization function for a module built into the interpreter. Programs which embed Python may use an array of these - structures in conjunction with :cfunc:`PyImport_ExtendInittab` to provide + structures in conjunction with :c:func:`PyImport_ExtendInittab` to provide additional built-in modules. The structure is defined in :file:`Include/import.h` as:: @@ -266,11 +266,11 @@ Importing Modules }; -.. cfunction:: int PyImport_ExtendInittab(struct _inittab *newtab) +.. c:function:: int PyImport_ExtendInittab(struct _inittab *newtab) Add a collection of modules to the table of built-in modules. The *newtab* array must end with a sentinel entry which contains *NULL* for the :attr:`name` field; failure to provide the sentinel value can result in a memory fault. Returns ``0`` on success or ``-1`` if insufficient memory could be allocated to extend the internal table. In the event of failure, no modules are added to the - internal table. This should be called before :cfunc:`Py_Initialize`. + internal table. This should be called before :c:func:`Py_Initialize`. diff --git a/Doc/c-api/init.rst b/Doc/c-api/init.rst index a53b494..6c58c5d 100644 --- a/Doc/c-api/init.rst +++ b/Doc/c-api/init.rst @@ -12,7 +12,7 @@ Initializing and finalizing the interpreter =========================================== -.. cfunction:: void Py_Initialize() +.. c:function:: void Py_Initialize() .. index:: single: Py_SetProgramName() @@ -31,40 +31,40 @@ Initializing and finalizing the interpreter Initialize the Python interpreter. In an application embedding Python, this should be called before using any other Python/C API functions; with the - exception of :cfunc:`Py_SetProgramName`, :cfunc:`Py_SetPythonHome`, :cfunc:`PyEval_InitThreads`, - :cfunc:`PyEval_ReleaseLock`, and :cfunc:`PyEval_AcquireLock`. This initializes + exception of :c:func:`Py_SetProgramName`, :c:func:`Py_SetPythonHome`, :c:func:`PyEval_InitThreads`, + :c:func:`PyEval_ReleaseLock`, and :c:func:`PyEval_AcquireLock`. This initializes the table of loaded modules (``sys.modules``), and creates the fundamental modules :mod:`__builtin__`, :mod:`__main__` and :mod:`sys`. It also initializes the module search path (``sys.path``). It does not set ``sys.argv``; use - :cfunc:`PySys_SetArgvEx` for that. This is a no-op when called for a second time - (without calling :cfunc:`Py_Finalize` first). There is no return value; it is a + :c:func:`PySys_SetArgvEx` for that. This is a no-op when called for a second time + (without calling :c:func:`Py_Finalize` first). There is no return value; it is a fatal error if the initialization fails. -.. cfunction:: void Py_InitializeEx(int initsigs) +.. c:function:: void Py_InitializeEx(int initsigs) - This function works like :cfunc:`Py_Initialize` if *initsigs* is 1. If + This function works like :c:func:`Py_Initialize` if *initsigs* is 1. If *initsigs* is 0, it skips initialization registration of signal handlers, which might be useful when Python is embedded. .. versionadded:: 2.4 -.. cfunction:: int Py_IsInitialized() +.. c:function:: int Py_IsInitialized() Return true (nonzero) when the Python interpreter has been initialized, false - (zero) if not. After :cfunc:`Py_Finalize` is called, this returns false until - :cfunc:`Py_Initialize` is called again. + (zero) if not. After :c:func:`Py_Finalize` is called, this returns false until + :c:func:`Py_Initialize` is called again. -.. cfunction:: void Py_Finalize() +.. c:function:: void Py_Finalize() - Undo all initializations made by :cfunc:`Py_Initialize` and subsequent use of + Undo all initializations made by :c:func:`Py_Initialize` and subsequent use of Python/C API functions, and destroy all sub-interpreters (see - :cfunc:`Py_NewInterpreter` below) that were created and not yet destroyed since - the last call to :cfunc:`Py_Initialize`. Ideally, this frees all memory + :c:func:`Py_NewInterpreter` below) that were created and not yet destroyed since + the last call to :c:func:`Py_Initialize`. Ideally, this frees all memory allocated by the Python interpreter. This is a no-op when called for a second - time (without calling :cfunc:`Py_Initialize` again first). There is no return + time (without calling :c:func:`Py_Initialize` again first). There is no return value; errors during finalization are ignored. This function is provided for a number of reasons. An embedding application @@ -83,25 +83,25 @@ Initializing and finalizing the interpreter please report it). Memory tied up in circular references between objects is not freed. Some memory allocated by extension modules may not be freed. Some extensions may not work properly if their initialization routine is called more - than once; this can happen if an application calls :cfunc:`Py_Initialize` and - :cfunc:`Py_Finalize` more than once. + than once; this can happen if an application calls :c:func:`Py_Initialize` and + :c:func:`Py_Finalize` more than once. Process-wide parameters ======================= -.. cfunction:: void Py_SetProgramName(char *name) +.. c:function:: void Py_SetProgramName(char *name) .. index:: single: Py_Initialize() single: main() single: Py_GetPath() - This function should be called before :cfunc:`Py_Initialize` is called for + This function should be called before :c:func:`Py_Initialize` is called for the first time, if it is called at all. It tells the interpreter the value - of the ``argv[0]`` argument to the :cfunc:`main` function of the program. - This is used by :cfunc:`Py_GetPath` and some other functions below to find + of the ``argv[0]`` argument to the :c:func:`main` function of the program. + This is used by :c:func:`Py_GetPath` and some other functions below to find the Python run-time libraries relative to the interpreter executable. The default value is ``'python'``. The argument should point to a zero-terminated character string in static storage whose contents will not @@ -109,20 +109,20 @@ Process-wide parameters interpreter will change the contents of this storage. -.. cfunction:: char* Py_GetProgramName() +.. c:function:: char* Py_GetProgramName() .. index:: single: Py_SetProgramName() - Return the program name set with :cfunc:`Py_SetProgramName`, or the default. + Return the program name set with :c:func:`Py_SetProgramName`, or the default. The returned string points into static storage; the caller should not modify its value. -.. cfunction:: char* Py_GetPrefix() +.. c:function:: char* Py_GetPrefix() Return the *prefix* for installed platform-independent files. This is derived through a number of complicated rules from the program name set with - :cfunc:`Py_SetProgramName` and some environment variables; for example, if the + :c:func:`Py_SetProgramName` and some environment variables; for example, if the program name is ``'/usr/local/bin/python'``, the prefix is ``'/usr/local'``. The returned string points into static storage; the caller should not modify its value. This corresponds to the :makevar:`prefix` variable in the top-level @@ -131,11 +131,11 @@ Process-wide parameters It is only useful on Unix. See also the next function. -.. cfunction:: char* Py_GetExecPrefix() +.. c:function:: char* Py_GetExecPrefix() Return the *exec-prefix* for installed platform-*dependent* files. This is derived through a number of complicated rules from the program name set with - :cfunc:`Py_SetProgramName` and some environment variables; for example, if the + :c:func:`Py_SetProgramName` and some environment variables; for example, if the program name is ``'/usr/local/bin/python'``, the exec-prefix is ``'/usr/local'``. The returned string points into static storage; the caller should not modify its value. This corresponds to the :makevar:`exec_prefix` @@ -166,7 +166,7 @@ Process-wide parameters platform. -.. cfunction:: char* Py_GetProgramFullPath() +.. c:function:: char* Py_GetProgramFullPath() .. index:: single: Py_SetProgramName() @@ -174,19 +174,19 @@ Process-wide parameters Return the full program name of the Python executable; this is computed as a side-effect of deriving the default module search path from the program name - (set by :cfunc:`Py_SetProgramName` above). The returned string points into + (set by :c:func:`Py_SetProgramName` above). The returned string points into static storage; the caller should not modify its value. The value is available to Python code as ``sys.executable``. -.. cfunction:: char* Py_GetPath() +.. c:function:: char* Py_GetPath() .. index:: triple: module; search; path single: path (in module sys) Return the default module search path; this is computed from the program name - (set by :cfunc:`Py_SetProgramName` above) and some environment variables. + (set by :c:func:`Py_SetProgramName` above) and some environment variables. The returned string consists of a series of directory names separated by a platform dependent delimiter character. The delimiter character is ``':'`` on Unix and Mac OS X, ``';'`` on Windows. The returned string points into @@ -198,7 +198,7 @@ Process-wide parameters .. XXX should give the exact rules -.. cfunction:: const char* Py_GetVersion() +.. c:function:: const char* Py_GetVersion() Return the version of this Python interpreter. This is a string that looks something like :: @@ -213,7 +213,7 @@ Process-wide parameters modify its value. The value is available to Python code as ``sys.version``. -.. cfunction:: const char* Py_GetPlatform() +.. c:function:: const char* Py_GetPlatform() .. index:: single: platform (in module sys) @@ -226,7 +226,7 @@ Process-wide parameters to Python code as ``sys.platform``. -.. cfunction:: const char* Py_GetCopyright() +.. c:function:: const char* Py_GetCopyright() Return the official copyright string for the current Python version, for example @@ -238,7 +238,7 @@ Process-wide parameters value. The value is available to Python code as ``sys.copyright``. -.. cfunction:: const char* Py_GetCompiler() +.. c:function:: const char* Py_GetCompiler() Return an indication of the compiler used to build the current Python version, in square brackets, for example:: @@ -252,7 +252,7 @@ Process-wide parameters ``sys.version``. -.. cfunction:: const char* Py_GetBuildInfo() +.. c:function:: const char* Py_GetBuildInfo() Return information about the sequence number and build date and time of the current Python interpreter instance, for example :: @@ -266,7 +266,7 @@ Process-wide parameters ``sys.version``. -.. cfunction:: void PySys_SetArgvEx(int argc, char **argv, int updatepath) +.. c:function:: void PySys_SetArgvEx(int argc, char **argv, int updatepath) .. index:: single: main() @@ -274,12 +274,12 @@ Process-wide parameters single: argv (in module sys) Set :data:`sys.argv` based on *argc* and *argv*. These parameters are - similar to those passed to the program's :cfunc:`main` function with the + similar to those passed to the program's :c:func:`main` function with the difference that the first entry should refer to the script file to be executed rather than the executable hosting the Python interpreter. If there isn't a script that will be run, the first entry in *argv* can be an empty string. If this function fails to initialize :data:`sys.argv`, a fatal - condition is signalled using :cfunc:`Py_FatalError`. + condition is signalled using :c:func:`Py_FatalError`. If *updatepath* is zero, this is all the function does. If *updatepath* is non-zero, the function also modifies :data:`sys.path` according to the @@ -301,7 +301,7 @@ Process-wide parameters On versions before 2.6.6, you can achieve the same effect by manually popping the first :data:`sys.path` element after having called - :cfunc:`PySys_SetArgv`, for example using:: + :c:func:`PySys_SetArgv`, for example using:: PyRun_SimpleString("import sys; sys.path.pop(0)\n"); @@ -311,12 +311,12 @@ Process-wide parameters check w/ Guido. -.. cfunction:: void PySys_SetArgv(int argc, char **argv) +.. c:function:: void PySys_SetArgv(int argc, char **argv) - This function works like :cfunc:`PySys_SetArgvEx` with *updatepath* set to 1. + This function works like :c:func:`PySys_SetArgvEx` with *updatepath* set to 1. -.. cfunction:: void Py_SetPythonHome(char *home) +.. c:function:: void Py_SetPythonHome(char *home) Set the default "home" directory, that is, the location of the standard Python libraries. See :envvar:`PYTHONHOME` for the meaning of the @@ -328,10 +328,10 @@ Process-wide parameters this storage. -.. cfunction:: char* Py_GetPythonHome() +.. c:function:: char* Py_GetPythonHome() Return the default "home", that is, the value set by a previous call to - :cfunc:`Py_SetPythonHome`, or the value of the :envvar:`PYTHONHOME` + :c:func:`Py_SetPythonHome`, or the value of the :envvar:`PYTHONHOME` environment variable if it is set. @@ -368,9 +368,9 @@ a file, so that other Python threads can run in the meantime. single: PyThreadState The Python interpreter keeps some thread-specific bookkeeping information -inside a data structure called :ctype:`PyThreadState`. There's also one -global variable pointing to the current :ctype:`PyThreadState`: it can -be retrieved using :cfunc:`PyThreadState_Get`. +inside a data structure called :c:type:`PyThreadState`. There's also one +global variable pointing to the current :c:type:`PyThreadState`: it can +be retrieved using :c:func:`PyThreadState_Get`. Releasing the GIL from extension code ------------------------------------- @@ -394,8 +394,8 @@ This is so common that a pair of macros exists to simplify it:: single: Py_BEGIN_ALLOW_THREADS single: Py_END_ALLOW_THREADS -The :cmacro:`Py_BEGIN_ALLOW_THREADS` macro opens a new block and declares a -hidden local variable; the :cmacro:`Py_END_ALLOW_THREADS` macro closes the +The :c:macro:`Py_BEGIN_ALLOW_THREADS` macro opens a new block and declares a +hidden local variable; the :c:macro:`Py_END_ALLOW_THREADS` macro closes the block. These two macros are still available when Python is compiled without thread support (they simply have an empty expansion). @@ -445,7 +445,7 @@ storing their thread state pointer, before you can start using the Python/C API. When you are done, you should reset the thread state pointer, release the GIL, and finally free the thread state data structure. -The :cfunc:`PyGILState_Ensure` and :cfunc:`PyGILState_Release` functions do +The :c:func:`PyGILState_Ensure` and :c:func:`PyGILState_Release` functions do all of the above automatically. The typical idiom for calling into Python from a C thread is:: @@ -459,14 +459,14 @@ from a C thread is:: /* Release the thread. No Python API allowed beyond this point. */ PyGILState_Release(gstate); -Note that the :cfunc:`PyGILState_\*` functions assume there is only one global -interpreter (created automatically by :cfunc:`Py_Initialize`). Python +Note that the :c:func:`PyGILState_\*` functions assume there is only one global +interpreter (created automatically by :c:func:`Py_Initialize`). Python supports the creation of additional interpreters (using -:cfunc:`Py_NewInterpreter`), but mixing multiple interpreters and the -:cfunc:`PyGILState_\*` API is unsupported. +:c:func:`Py_NewInterpreter`), but mixing multiple interpreters and the +:c:func:`PyGILState_\*` API is unsupported. Another important thing to note about threads is their behaviour in the face -of the C :cfunc:`fork` call. On most systems with :cfunc:`fork`, after a +of the C :c:func:`fork` call. On most systems with :c:func:`fork`, after a process forks only the thread that issued the fork will exist. That also means any locks held by other threads will never be released. Python solves this for :func:`os.fork` by acquiring the locks it uses internally before @@ -474,12 +474,12 @@ the fork, and releasing them afterwards. In addition, it resets any :ref:`lock-objects` in the child. When extending or embedding Python, there is no way to inform Python of additional (non-Python) locks that need to be acquired before or reset after a fork. OS facilities such as -:cfunc:`pthread_atfork` would need to be used to accomplish the same thing. -Additionally, when extending or embedding Python, calling :cfunc:`fork` +:c:func:`pthread_atfork` would need to be used to accomplish the same thing. +Additionally, when extending or embedding Python, calling :c:func:`fork` directly rather than through :func:`os.fork` (and returning to or calling into Python) may result in a deadlock by one of Python's internal locks being held by a thread that is defunct after the fork. -:cfunc:`PyOS_AfterFork` tries to reset the necessary locks, but is not +:c:func:`PyOS_AfterFork` tries to reset the necessary locks, but is not always able to. @@ -489,7 +489,7 @@ High-level API These are the most commonly used types and functions when writing C extension code, or when embedding the Python interpreter: -.. ctype:: PyInterpreterState +.. c:type:: PyInterpreterState This data structure represents the state shared by a number of cooperating threads. Threads belonging to the same interpreter share their module @@ -502,14 +502,14 @@ code, or when embedding the Python interpreter: interpreter they belong. -.. ctype:: PyThreadState +.. c:type:: PyThreadState This data structure represents the state of a single thread. The only public - data member is :ctype:`PyInterpreterState \*`:attr:`interp`, which points to + data member is :c:type:`PyInterpreterState \*`:attr:`interp`, which points to this thread's interpreter state. -.. cfunction:: void PyEval_InitThreads() +.. c:function:: void PyEval_InitThreads() .. index:: single: PyEval_ReleaseLock() @@ -519,14 +519,14 @@ code, or when embedding the Python interpreter: Initialize and acquire the global interpreter lock. It should be called in the main thread before creating a second thread or engaging in any other thread - operations such as :cfunc:`PyEval_ReleaseLock` or + operations such as :c:func:`PyEval_ReleaseLock` or ``PyEval_ReleaseThread(tstate)``. It is not needed before calling - :cfunc:`PyEval_SaveThread` or :cfunc:`PyEval_RestoreThread`. + :c:func:`PyEval_SaveThread` or :c:func:`PyEval_RestoreThread`. .. index:: single: Py_Initialize() This is a no-op when called for a second time. It is safe to call this function - before calling :cfunc:`Py_Initialize`. + before calling :c:func:`Py_Initialize`. .. index:: module: thread @@ -539,7 +539,7 @@ code, or when embedding the Python interpreter: when this function initializes the global interpreter lock, it also acquires it. Before the Python :mod:`_thread` module creates a new thread, knowing that either it has the lock or the lock hasn't been created yet, it calls - :cfunc:`PyEval_InitThreads`. When this call returns, it is guaranteed that + :c:func:`PyEval_InitThreads`. When this call returns, it is guaranteed that the lock has been created and that the calling thread has acquired it. It is **not** safe to call this function when it is unknown which thread (if @@ -548,9 +548,9 @@ code, or when embedding the Python interpreter: This function is not available when thread support is disabled at compile time. -.. cfunction:: int PyEval_ThreadsInitialized() +.. c:function:: int PyEval_ThreadsInitialized() - Returns a non-zero value if :cfunc:`PyEval_InitThreads` has been called. This + Returns a non-zero value if :c:func:`PyEval_InitThreads` has been called. This function can be called without holding the GIL, and therefore can be used to avoid calls to the locking API when running single-threaded. This function is not available when thread support is disabled at compile time. @@ -558,7 +558,7 @@ code, or when embedding the Python interpreter: .. versionadded:: 2.4 -.. cfunction:: PyThreadState* PyEval_SaveThread() +.. c:function:: PyThreadState* PyEval_SaveThread() Release the global interpreter lock (if it has been created and thread support is enabled) and reset the thread state to *NULL*, returning the @@ -567,7 +567,7 @@ code, or when embedding the Python interpreter: when thread support is disabled at compile time.) -.. cfunction:: void PyEval_RestoreThread(PyThreadState *tstate) +.. c:function:: void PyEval_RestoreThread(PyThreadState *tstate) Acquire the global interpreter lock (if it has been created and thread support is enabled) and set the thread state to *tstate*, which must not be @@ -576,23 +576,23 @@ code, or when embedding the Python interpreter: when thread support is disabled at compile time.) -.. cfunction:: PyThreadState* PyThreadState_Get() +.. c:function:: PyThreadState* PyThreadState_Get() Return the current thread state. The global interpreter lock must be held. When the current thread state is *NULL*, this issues a fatal error (so that the caller needn't check for *NULL*). -.. cfunction:: PyThreadState* PyThreadState_Swap(PyThreadState *tstate) +.. c:function:: PyThreadState* PyThreadState_Swap(PyThreadState *tstate) Swap the current thread state with the thread state given by the argument *tstate*, which may be *NULL*. The global interpreter lock must be held and is not released. -.. cfunction:: void PyEval_ReInitThreads() +.. c:function:: void PyEval_ReInitThreads() - This function is called from :cfunc:`PyOS_AfterFork` to ensure that newly + This function is called from :c:func:`PyOS_AfterFork` to ensure that newly created child processes don't hold locks referring to threads which are not running in the child process. @@ -600,24 +600,24 @@ code, or when embedding the Python interpreter: The following functions use thread-local storage, and are not compatible with sub-interpreters: -.. cfunction:: PyGILState_STATE PyGILState_Ensure() +.. c:function:: PyGILState_STATE PyGILState_Ensure() Ensure that the current thread is ready to call the Python C API regardless of the current state of Python, or of the global interpreter lock. This may be called as many times as desired by a thread as long as each call is - matched with a call to :cfunc:`PyGILState_Release`. In general, other - thread-related APIs may be used between :cfunc:`PyGILState_Ensure` and - :cfunc:`PyGILState_Release` calls as long as the thread state is restored to + matched with a call to :c:func:`PyGILState_Release`. In general, other + thread-related APIs may be used between :c:func:`PyGILState_Ensure` and + :c:func:`PyGILState_Release` calls as long as the thread state is restored to its previous state before the Release(). For example, normal usage of the - :cmacro:`Py_BEGIN_ALLOW_THREADS` and :cmacro:`Py_END_ALLOW_THREADS` macros is + :c:macro:`Py_BEGIN_ALLOW_THREADS` and :c:macro:`Py_END_ALLOW_THREADS` macros is acceptable. The return value is an opaque "handle" to the thread state when - :cfunc:`PyGILState_Ensure` was called, and must be passed to - :cfunc:`PyGILState_Release` to ensure Python is left in the same state. Even + :c:func:`PyGILState_Ensure` was called, and must be passed to + :c:func:`PyGILState_Release` to ensure Python is left in the same state. Even though recursive calls are allowed, these handles *cannot* be shared - each - unique call to :cfunc:`PyGILState_Ensure` must save the handle for its call - to :cfunc:`PyGILState_Release`. + unique call to :c:func:`PyGILState_Ensure` must save the handle for its call + to :c:func:`PyGILState_Release`. When the function returns, the current thread will hold the GIL and be able to call arbitrary Python code. Failure is a fatal error. @@ -625,20 +625,20 @@ with sub-interpreters: .. versionadded:: 2.3 -.. cfunction:: void PyGILState_Release(PyGILState_STATE) +.. c:function:: void PyGILState_Release(PyGILState_STATE) Release any resources previously acquired. After this call, Python's state will - be the same as it was prior to the corresponding :cfunc:`PyGILState_Ensure` call + be the same as it was prior to the corresponding :c:func:`PyGILState_Ensure` call (but generally this state will be unknown to the caller, hence the use of the GILState API). - Every call to :cfunc:`PyGILState_Ensure` must be matched by a call to - :cfunc:`PyGILState_Release` on the same thread. + Every call to :c:func:`PyGILState_Ensure` must be matched by a call to + :c:func:`PyGILState_Release` on the same thread. .. versionadded:: 2.3 -.. cfunction:: PyThreadState PyGILState_GetThisThreadState() +.. c:function:: PyThreadState PyGILState_GetThisThreadState() Get the current thread state for this thread. May return ``NULL`` if no GILState API has been used on the current thread. Note that the main thread @@ -652,33 +652,33 @@ The following macros are normally used without a trailing semicolon; look for example usage in the Python source distribution. -.. cmacro:: Py_BEGIN_ALLOW_THREADS +.. c:macro:: Py_BEGIN_ALLOW_THREADS This macro expands to ``{ PyThreadState *_save; _save = PyEval_SaveThread();``. Note that it contains an opening brace; it must be matched with a following - :cmacro:`Py_END_ALLOW_THREADS` macro. See above for further discussion of this + :c:macro:`Py_END_ALLOW_THREADS` macro. See above for further discussion of this macro. It is a no-op when thread support is disabled at compile time. -.. cmacro:: Py_END_ALLOW_THREADS +.. c:macro:: Py_END_ALLOW_THREADS This macro expands to ``PyEval_RestoreThread(_save); }``. Note that it contains a closing brace; it must be matched with an earlier - :cmacro:`Py_BEGIN_ALLOW_THREADS` macro. See above for further discussion of + :c:macro:`Py_BEGIN_ALLOW_THREADS` macro. See above for further discussion of this macro. It is a no-op when thread support is disabled at compile time. -.. cmacro:: Py_BLOCK_THREADS +.. c:macro:: Py_BLOCK_THREADS This macro expands to ``PyEval_RestoreThread(_save);``: it is equivalent to - :cmacro:`Py_END_ALLOW_THREADS` without the closing brace. It is a no-op when + :c:macro:`Py_END_ALLOW_THREADS` without the closing brace. It is a no-op when thread support is disabled at compile time. -.. cmacro:: Py_UNBLOCK_THREADS +.. c:macro:: Py_UNBLOCK_THREADS This macro expands to ``_save = PyEval_SaveThread();``: it is equivalent to - :cmacro:`Py_BEGIN_ALLOW_THREADS` without the opening brace and variable + :c:macro:`Py_BEGIN_ALLOW_THREADS` without the opening brace and variable declaration. It is a no-op when thread support is disabled at compile time. @@ -690,47 +690,47 @@ at compile time, and must be called only when the global interpreter lock has been created. -.. cfunction:: PyInterpreterState* PyInterpreterState_New() +.. c:function:: PyInterpreterState* PyInterpreterState_New() Create a new interpreter state object. The global interpreter lock need not be held, but may be held if it is necessary to serialize calls to this function. -.. cfunction:: void PyInterpreterState_Clear(PyInterpreterState *interp) +.. c:function:: void PyInterpreterState_Clear(PyInterpreterState *interp) Reset all information in an interpreter state object. The global interpreter lock must be held. -.. cfunction:: void PyInterpreterState_Delete(PyInterpreterState *interp) +.. c:function:: void PyInterpreterState_Delete(PyInterpreterState *interp) Destroy an interpreter state object. The global interpreter lock need not be held. The interpreter state must have been reset with a previous call to - :cfunc:`PyInterpreterState_Clear`. + :c:func:`PyInterpreterState_Clear`. -.. cfunction:: PyThreadState* PyThreadState_New(PyInterpreterState *interp) +.. c:function:: PyThreadState* PyThreadState_New(PyInterpreterState *interp) Create a new thread state object belonging to the given interpreter object. The global interpreter lock need not be held, but may be held if it is necessary to serialize calls to this function. -.. cfunction:: void PyThreadState_Clear(PyThreadState *tstate) +.. c:function:: void PyThreadState_Clear(PyThreadState *tstate) Reset all information in a thread state object. The global interpreter lock must be held. -.. cfunction:: void PyThreadState_Delete(PyThreadState *tstate) +.. c:function:: void PyThreadState_Delete(PyThreadState *tstate) Destroy a thread state object. The global interpreter lock need not be held. The thread state must have been reset with a previous call to - :cfunc:`PyThreadState_Clear`. + :c:func:`PyThreadState_Clear`. -.. cfunction:: PyObject* PyThreadState_GetDict() +.. c:function:: PyObject* PyThreadState_GetDict() Return a dictionary in which extensions can store thread-specific state information. Each extension should use a unique key to use to store state in @@ -743,7 +743,7 @@ been created. meant that an exception was raised. -.. cfunction:: int PyThreadState_SetAsyncExc(long id, PyObject *exc) +.. c:function:: int PyThreadState_SetAsyncExc(long id, PyObject *exc) Asynchronously raise an exception in a thread. The *id* argument is the thread id of the target thread; *exc* is the exception object to be raised. This @@ -756,18 +756,18 @@ been created. .. versionadded:: 2.3 -.. cfunction:: void PyEval_AcquireThread(PyThreadState *tstate) +.. c:function:: void PyEval_AcquireThread(PyThreadState *tstate) Acquire the global interpreter lock and set the current thread state to *tstate*, which should not be *NULL*. The lock must have been created earlier. If this thread already has the lock, deadlock ensues. - :cfunc:`PyEval_RestoreThread` is a higher-level function which is always + :c:func:`PyEval_RestoreThread` is a higher-level function which is always available (even when thread support isn't enabled or when threads have not been initialized). -.. cfunction:: void PyEval_ReleaseThread(PyThreadState *tstate) +.. c:function:: void PyEval_ReleaseThread(PyThreadState *tstate) Reset the current thread state to *NULL* and release the global interpreter lock. The lock must have been created earlier and must be held by the current @@ -775,29 +775,29 @@ been created. that it represents the current thread state --- if it isn't, a fatal error is reported. - :cfunc:`PyEval_SaveThread` is a higher-level function which is always + :c:func:`PyEval_SaveThread` is a higher-level function which is always available (even when thread support isn't enabled or when threads have not been initialized). -.. cfunction:: void PyEval_AcquireLock() +.. c:function:: void PyEval_AcquireLock() Acquire the global interpreter lock. The lock must have been created earlier. If this thread already has the lock, a deadlock ensues. .. warning:: This function does not change the current thread state. Please use - :cfunc:`PyEval_RestoreThread` or :cfunc:`PyEval_AcquireThread` + :c:func:`PyEval_RestoreThread` or :c:func:`PyEval_AcquireThread` instead. -.. cfunction:: void PyEval_ReleaseLock() +.. c:function:: void PyEval_ReleaseLock() Release the global interpreter lock. The lock must have been created earlier. .. warning:: This function does not change the current thread state. Please use - :cfunc:`PyEval_SaveThread` or :cfunc:`PyEval_ReleaseThread` + :c:func:`PyEval_SaveThread` or :c:func:`PyEval_ReleaseThread` instead. @@ -808,11 +808,11 @@ While in most uses, you will only embed a single Python interpreter, there are cases where you need to create several independent interpreters in the same process and perhaps even in the same thread. Sub-interpreters allow you to do that. You can switch between sub-interpreters using the -:cfunc:`PyThreadState_Swap` function. You can create and destroy them +:c:func:`PyThreadState_Swap` function. You can create and destroy them using the following functions: -.. cfunction:: PyThreadState* Py_NewInterpreter() +.. c:function:: PyThreadState* Py_NewInterpreter() .. index:: module: builtins @@ -854,13 +854,13 @@ using the following functions: and filled with the contents of this copy; the extension's ``init`` function is not called. Note that this is different from what happens when an extension is imported after the interpreter has been completely re-initialized by calling - :cfunc:`Py_Finalize` and :cfunc:`Py_Initialize`; in that case, the extension's + :c:func:`Py_Finalize` and :c:func:`Py_Initialize`; in that case, the extension's ``initmodule`` function *is* called again. .. index:: single: close() (in module os) -.. cfunction:: void Py_EndInterpreter(PyThreadState *tstate) +.. c:function:: void Py_EndInterpreter(PyThreadState *tstate) .. index:: single: Py_Finalize() @@ -869,7 +869,7 @@ using the following functions: states below. When the call returns, the current thread state is *NULL*. All thread states associated with this interpreter are destroyed. (The global interpreter lock must be held before calling this function and is still held - when it returns.) :cfunc:`Py_Finalize` will destroy all sub-interpreters that + when it returns.) :c:func:`Py_Finalize` will destroy all sub-interpreters that haven't been explicitly destroyed at that point. @@ -890,11 +890,11 @@ instances or classes between sub-interpreters, since import operations executed by such objects may affect the wrong (sub-)interpreter's dictionary of loaded modules. -Also note that combining this functionality with :cfunc:`PyGILState_\*` APIs +Also note that combining this functionality with :c:func:`PyGILState_\*` APIs is delicate, because these APIs assume a bijection between Python thread states and OS-level threads, an assumption broken by the presence of sub-interpreters. It is highly recommended that you don't switch sub-interpreters between a pair -of matching :cfunc:`PyGILState_Ensure` and :cfunc:`PyGILState_Release` calls. +of matching :c:func:`PyGILState_Ensure` and :c:func:`PyGILState_Release` calls. Furthermore, extensions (such as :mod:`ctypes`) using these APIs to allow calling of Python code from non-Python created threads will probably be broken when using sub-interpreters. @@ -916,7 +916,7 @@ a worker thread and the actual call than made at the earliest convenience by the main thread where it has possession of the global interpreter lock and can perform any Python API calls. -.. cfunction:: int Py_AddPendingCall(int (*func)(void *), void *arg) +.. c:function:: int Py_AddPendingCall(int (*func)(void *), void *arg) .. index:: single: Py_AddPendingCall() @@ -964,10 +964,10 @@ function are the same as had been reported to the Python-level trace functions in previous versions. -.. ctype:: int (*Py_tracefunc)(PyObject *obj, PyFrameObject *frame, int what, PyObject *arg) +.. c:type:: int (*Py_tracefunc)(PyObject *obj, PyFrameObject *frame, int what, PyObject *arg) - The type of the trace function registered using :cfunc:`PyEval_SetProfile` and - :cfunc:`PyEval_SetTrace`. The first parameter is the object passed to the + The type of the trace function registered using :c:func:`PyEval_SetProfile` and + :c:func:`PyEval_SetTrace`. The first parameter is the object passed to the registration function as *obj*, *frame* is the frame object to which the event pertains, *what* is one of the constants :const:`PyTrace_CALL`, :const:`PyTrace_EXCEPTION`, :const:`PyTrace_LINE`, :const:`PyTrace_RETURN`, @@ -995,18 +995,18 @@ in previous versions. +------------------------------+--------------------------------------+ -.. cvar:: int PyTrace_CALL +.. c:var:: int PyTrace_CALL - The value of the *what* parameter to a :ctype:`Py_tracefunc` function when a new + The value of the *what* parameter to a :c:type:`Py_tracefunc` function when a new call to a function or method is being reported, or a new entry into a generator. Note that the creation of the iterator for a generator function is not reported as there is no control transfer to the Python bytecode in the corresponding frame. -.. cvar:: int PyTrace_EXCEPTION +.. c:var:: int PyTrace_EXCEPTION - The value of the *what* parameter to a :ctype:`Py_tracefunc` function when an + The value of the *what* parameter to a :c:type:`Py_tracefunc` function when an exception has been raised. The callback function is called with this value for *what* when after any bytecode is processed after which the exception becomes set within the frame being executed. The effect of this is that as exception @@ -1015,37 +1015,37 @@ in previous versions. these events; they are not needed by the profiler. -.. cvar:: int PyTrace_LINE +.. c:var:: int PyTrace_LINE The value passed as the *what* parameter to a trace function (but not a profiling function) when a line-number event is being reported. -.. cvar:: int PyTrace_RETURN +.. c:var:: int PyTrace_RETURN - The value for the *what* parameter to :ctype:`Py_tracefunc` functions when a + The value for the *what* parameter to :c:type:`Py_tracefunc` functions when a call is returning without propagating an exception. -.. cvar:: int PyTrace_C_CALL +.. c:var:: int PyTrace_C_CALL - The value for the *what* parameter to :ctype:`Py_tracefunc` functions when a C + The value for the *what* parameter to :c:type:`Py_tracefunc` functions when a C function is about to be called. -.. cvar:: int PyTrace_C_EXCEPTION +.. c:var:: int PyTrace_C_EXCEPTION - The value for the *what* parameter to :ctype:`Py_tracefunc` functions when a C + The value for the *what* parameter to :c:type:`Py_tracefunc` functions when a C function has raised an exception. -.. cvar:: int PyTrace_C_RETURN +.. c:var:: int PyTrace_C_RETURN - The value for the *what* parameter to :ctype:`Py_tracefunc` functions when a C + The value for the *what* parameter to :c:type:`Py_tracefunc` functions when a C function has returned. -.. cfunction:: void PyEval_SetProfile(Py_tracefunc func, PyObject *obj) +.. c:function:: void PyEval_SetProfile(Py_tracefunc func, PyObject *obj) Set the profiler function to *func*. The *obj* parameter is passed to the function as its first parameter, and may be any Python object, or *NULL*. If @@ -1055,13 +1055,13 @@ in previous versions. events. -.. cfunction:: void PyEval_SetTrace(Py_tracefunc func, PyObject *obj) +.. c:function:: void PyEval_SetTrace(Py_tracefunc func, PyObject *obj) Set the tracing function to *func*. This is similar to - :cfunc:`PyEval_SetProfile`, except the tracing function does receive line-number + :c:func:`PyEval_SetProfile`, except the tracing function does receive line-number events. -.. cfunction:: PyObject* PyEval_GetCallStats(PyObject *self) +.. c:function:: PyObject* PyEval_GetCallStats(PyObject *self) Return a tuple of function call counts. There are constants defined for the positions within the tuple: @@ -1113,14 +1113,14 @@ Advanced Debugger Support These functions are only intended to be used by advanced debugging tools. -.. cfunction:: PyInterpreterState* PyInterpreterState_Head() +.. c:function:: PyInterpreterState* PyInterpreterState_Head() Return the interpreter state object at the head of the list of all such objects. .. versionadded:: 2.2 -.. cfunction:: PyInterpreterState* PyInterpreterState_Next(PyInterpreterState *interp) +.. c:function:: PyInterpreterState* PyInterpreterState_Next(PyInterpreterState *interp) Return the next interpreter state object after *interp* from the list of all such objects. @@ -1128,18 +1128,18 @@ These functions are only intended to be used by advanced debugging tools. .. versionadded:: 2.2 -.. cfunction:: PyThreadState * PyInterpreterState_ThreadHead(PyInterpreterState *interp) +.. c:function:: PyThreadState * PyInterpreterState_ThreadHead(PyInterpreterState *interp) - Return the a pointer to the first :ctype:`PyThreadState` object in the list of + Return the a pointer to the first :c:type:`PyThreadState` object in the list of threads associated with the interpreter *interp*. .. versionadded:: 2.2 -.. cfunction:: PyThreadState* PyThreadState_Next(PyThreadState *tstate) +.. c:function:: PyThreadState* PyThreadState_Next(PyThreadState *tstate) Return the next thread state object after *tstate* from the list of all such - objects belonging to the same :ctype:`PyInterpreterState` object. + objects belonging to the same :c:type:`PyInterpreterState` object. .. versionadded:: 2.2 diff --git a/Doc/c-api/int.rst b/Doc/c-api/int.rst index c561bc2..254219c 100644 --- a/Doc/c-api/int.rst +++ b/Doc/c-api/int.rst @@ -8,39 +8,39 @@ Plain Integer Objects .. index:: object: integer -.. ctype:: PyIntObject +.. c:type:: PyIntObject - This subtype of :ctype:`PyObject` represents a Python integer object. + This subtype of :c:type:`PyObject` represents a Python integer object. -.. cvar:: PyTypeObject PyInt_Type +.. c:var:: PyTypeObject PyInt_Type .. index:: single: IntType (in modules types) - This instance of :ctype:`PyTypeObject` represents the Python plain integer type. + This instance of :c:type:`PyTypeObject` represents the Python plain integer type. This is the same object as ``int`` and ``types.IntType``. -.. cfunction:: int PyInt_Check(PyObject *o) +.. c:function:: int PyInt_Check(PyObject *o) - Return true if *o* is of type :cdata:`PyInt_Type` or a subtype of - :cdata:`PyInt_Type`. + Return true if *o* is of type :c:data:`PyInt_Type` or a subtype of + :c:data:`PyInt_Type`. .. versionchanged:: 2.2 Allowed subtypes to be accepted. -.. cfunction:: int PyInt_CheckExact(PyObject *o) +.. c:function:: int PyInt_CheckExact(PyObject *o) - Return true if *o* is of type :cdata:`PyInt_Type`, but not a subtype of - :cdata:`PyInt_Type`. + Return true if *o* is of type :c:data:`PyInt_Type`, but not a subtype of + :c:data:`PyInt_Type`. .. versionadded:: 2.2 -.. cfunction:: PyObject* PyInt_FromString(char *str, char **pend, int base) +.. c:function:: PyObject* PyInt_FromString(char *str, char **pend, int base) - Return a new :ctype:`PyIntObject` or :ctype:`PyLongObject` based on the string + Return a new :c:type:`PyIntObject` or :c:type:`PyLongObject` based on the string value in *str*, which is interpreted according to the radix in *base*. If *pend* is non-*NULL*, ``*pend`` will point to the first character in *str* which follows the representation of the number. If *base* is ``0``, the radix will be @@ -49,13 +49,13 @@ Plain Integer Objects 8 will be used; otherwise radix 10 will be used. If *base* is not ``0``, it must be between ``2`` and ``36``, inclusive. Leading spaces are ignored. If there are no digits, :exc:`ValueError` will be raised. If the string represents - a number too large to be contained within the machine's :ctype:`long int` type - and overflow warnings are being suppressed, a :ctype:`PyLongObject` will be + a number too large to be contained within the machine's :c:type:`long int` type + and overflow warnings are being suppressed, a :c:type:`PyLongObject` will be returned. If overflow warnings are not being suppressed, *NULL* will be returned in this case. -.. cfunction:: PyObject* PyInt_FromLong(long ival) +.. c:function:: PyObject* PyInt_FromLong(long ival) Create a new integer object with a value of *ival*. @@ -66,7 +66,7 @@ Plain Integer Objects undefined. :-) -.. cfunction:: PyObject* PyInt_FromSsize_t(Py_ssize_t ival) +.. c:function:: PyObject* PyInt_FromSsize_t(Py_ssize_t ival) Create a new integer object with a value of *ival*. If the value is larger than ``LONG_MAX`` or smaller than ``LONG_MIN``, a long integer object is @@ -75,7 +75,7 @@ Plain Integer Objects .. versionadded:: 2.5 -.. cfunction:: PyObject* PyInt_FromSize_t(size_t ival) +.. c:function:: PyObject* PyInt_FromSize_t(size_t ival) Create a new integer object with a value of *ival*. If the value exceeds ``LONG_MAX``, a long integer object is returned. @@ -83,47 +83,47 @@ Plain Integer Objects .. versionadded:: 2.5 -.. cfunction:: long PyInt_AsLong(PyObject *io) +.. c:function:: long PyInt_AsLong(PyObject *io) - Will first attempt to cast the object to a :ctype:`PyIntObject`, if it is not + Will first attempt to cast the object to a :c:type:`PyIntObject`, if it is not already one, and then return its value. If there is an error, ``-1`` is returned, and the caller should check ``PyErr_Occurred()`` to find out whether there was an error, or whether the value just happened to be -1. -.. cfunction:: long PyInt_AS_LONG(PyObject *io) +.. c:function:: long PyInt_AS_LONG(PyObject *io) Return the value of the object *io*. No error checking is performed. -.. cfunction:: unsigned long PyInt_AsUnsignedLongMask(PyObject *io) +.. c:function:: unsigned long PyInt_AsUnsignedLongMask(PyObject *io) - Will first attempt to cast the object to a :ctype:`PyIntObject` or - :ctype:`PyLongObject`, if it is not already one, and then return its value as + Will first attempt to cast the object to a :c:type:`PyIntObject` or + :c:type:`PyLongObject`, if it is not already one, and then return its value as unsigned long. This function does not check for overflow. .. versionadded:: 2.3 -.. cfunction:: unsigned PY_LONG_LONG PyInt_AsUnsignedLongLongMask(PyObject *io) +.. c:function:: unsigned PY_LONG_LONG PyInt_AsUnsignedLongLongMask(PyObject *io) - Will first attempt to cast the object to a :ctype:`PyIntObject` or - :ctype:`PyLongObject`, if it is not already one, and then return its value as + Will first attempt to cast the object to a :c:type:`PyIntObject` or + :c:type:`PyLongObject`, if it is not already one, and then return its value as unsigned long long, without checking for overflow. .. versionadded:: 2.3 -.. cfunction:: Py_ssize_t PyInt_AsSsize_t(PyObject *io) +.. c:function:: Py_ssize_t PyInt_AsSsize_t(PyObject *io) - Will first attempt to cast the object to a :ctype:`PyIntObject` or - :ctype:`PyLongObject`, if it is not already one, and then return its value as - :ctype:`Py_ssize_t`. + Will first attempt to cast the object to a :c:type:`PyIntObject` or + :c:type:`PyLongObject`, if it is not already one, and then return its value as + :c:type:`Py_ssize_t`. .. versionadded:: 2.5 -.. cfunction:: long PyInt_GetMax() +.. c:function:: long PyInt_GetMax() .. index:: single: LONG_MAX @@ -131,7 +131,7 @@ Plain Integer Objects (:const:`LONG_MAX`, as defined in the system header files). -.. cfunction:: int PyInt_ClearFreeList() +.. c:function:: int PyInt_ClearFreeList() Clear the integer free list. Return the number of items that could not be freed. diff --git a/Doc/c-api/intro.rst b/Doc/c-api/intro.rst index 94af0f5..4216881 100644 --- a/Doc/c-api/intro.rst +++ b/Doc/c-api/intro.rst @@ -88,15 +88,15 @@ Objects, Types and Reference Counts .. index:: object: type Most Python/C API functions have one or more arguments as well as a return value -of type :ctype:`PyObject\*`. This type is a pointer to an opaque data type +of type :c:type:`PyObject\*`. This type is a pointer to an opaque data type representing an arbitrary Python object. Since all Python object types are treated the same way by the Python language in most situations (e.g., assignments, scope rules, and argument passing), it is only fitting that they should be represented by a single C type. Almost all Python objects live on the heap: you never declare an automatic or static variable of type -:ctype:`PyObject`, only pointer variables of type :ctype:`PyObject\*` can be +:c:type:`PyObject`, only pointer variables of type :c:type:`PyObject\*` can be declared. The sole exception are the type objects; since these must never be -deallocated, they are typically static :ctype:`PyTypeObject` objects. +deallocated, they are typically static :c:type:`PyTypeObject` objects. All Python objects (even Python integers) have a :dfn:`type` and a :dfn:`reference count`. An object's type determines what kind of object it is @@ -127,8 +127,8 @@ that.") single: Py_DECREF() Reference counts are always manipulated explicitly. The normal way is to use -the macro :cfunc:`Py_INCREF` to increment an object's reference count by one, -and :cfunc:`Py_DECREF` to decrement it by one. The :cfunc:`Py_DECREF` macro +the macro :c:func:`Py_INCREF` to increment an object's reference count by one, +and :c:func:`Py_DECREF` to decrement it by one. The :c:func:`Py_DECREF` macro is considerably more complex than the incref one, since it must check whether the reference count becomes zero and then cause the object's deallocator to be called. The deallocator is a function pointer contained in the object's type @@ -159,13 +159,13 @@ for a while without incrementing its reference count. Some other operation might conceivably remove the object from the list, decrementing its reference count and possible deallocating it. The real danger is that innocent-looking operations may invoke arbitrary Python code which could do this; there is a code -path which allows control to flow back to the user from a :cfunc:`Py_DECREF`, so +path which allows control to flow back to the user from a :c:func:`Py_DECREF`, so almost any operation is potentially dangerous. A safe approach is to always use the generic operations (functions whose name begins with ``PyObject_``, ``PyNumber_``, ``PySequence_`` or ``PyMapping_``). These operations always increment the reference count of the object they return. -This leaves the caller with the responsibility to call :cfunc:`Py_DECREF` when +This leaves the caller with the responsibility to call :c:func:`Py_DECREF` when they are done with the result; this soon becomes second nature. @@ -180,7 +180,7 @@ to objects (objects are not owned: they are always shared). "Owning a reference" means being responsible for calling Py_DECREF on it when the reference is no longer needed. Ownership can also be transferred, meaning that the code that receives ownership of the reference then becomes responsible for -eventually decref'ing it by calling :cfunc:`Py_DECREF` or :cfunc:`Py_XDECREF` +eventually decref'ing it by calling :c:func:`Py_DECREF` or :c:func:`Py_XDECREF` when it's no longer needed---or passing on this responsibility (usually to its caller). When a function passes ownership of a reference on to its caller, the caller is said to receive a *new* reference. When no ownership is transferred, @@ -198,7 +198,7 @@ responsible for it any longer. single: PyTuple_SetItem() Few functions steal references; the two notable exceptions are -:cfunc:`PyList_SetItem` and :cfunc:`PyTuple_SetItem`, which steal a reference +:c:func:`PyList_SetItem` and :c:func:`PyTuple_SetItem`, which steal a reference to the item (but not to the tuple or list into which the item is put!). These functions were designed to steal a reference because of a common idiom for populating a tuple or list with newly created objects; for example, the code to @@ -212,21 +212,21 @@ error handling for the moment; a better way to code this is shown below):: PyTuple_SetItem(t, 1, PyInt_FromLong(2L)); PyTuple_SetItem(t, 2, PyString_FromString("three")); -Here, :cfunc:`PyInt_FromLong` returns a new reference which is immediately -stolen by :cfunc:`PyTuple_SetItem`. When you want to keep using an object -although the reference to it will be stolen, use :cfunc:`Py_INCREF` to grab +Here, :c:func:`PyInt_FromLong` returns a new reference which is immediately +stolen by :c:func:`PyTuple_SetItem`. When you want to keep using an object +although the reference to it will be stolen, use :c:func:`Py_INCREF` to grab another reference before calling the reference-stealing function. -Incidentally, :cfunc:`PyTuple_SetItem` is the *only* way to set tuple items; -:cfunc:`PySequence_SetItem` and :cfunc:`PyObject_SetItem` refuse to do this +Incidentally, :c:func:`PyTuple_SetItem` is the *only* way to set tuple items; +:c:func:`PySequence_SetItem` and :c:func:`PyObject_SetItem` refuse to do this since tuples are an immutable data type. You should only use -:cfunc:`PyTuple_SetItem` for tuples that you are creating yourself. +:c:func:`PyTuple_SetItem` for tuples that you are creating yourself. -Equivalent code for populating a list can be written using :cfunc:`PyList_New` -and :cfunc:`PyList_SetItem`. +Equivalent code for populating a list can be written using :c:func:`PyList_New` +and :c:func:`PyList_SetItem`. However, in practice, you will rarely use these ways of creating and populating -a tuple or list. There's a generic function, :cfunc:`Py_BuildValue`, that can +a tuple or list. There's a generic function, :c:func:`Py_BuildValue`, that can create most common objects from C values, directed by a :dfn:`format string`. For example, the above two blocks of code could be replaced by the following (which also takes care of the error checking):: @@ -236,7 +236,7 @@ For example, the above two blocks of code could be replaced by the following tuple = Py_BuildValue("(iis)", 1, 2, "three"); list = Py_BuildValue("[iis]", 1, 2, "three"); -It is much more common to use :cfunc:`PyObject_SetItem` and friends with items +It is much more common to use :c:func:`PyObject_SetItem` and friends with items whose references you are only borrowing, like arguments that were passed in to the function you are writing. In that case, their behaviour regarding reference counts is much saner, since you don't have to increment a reference count so you @@ -270,15 +270,15 @@ for that reference, many functions that return a reference to an object give you ownership of the reference. The reason is simple: in many cases, the returned object is created on the fly, and the reference you get is the only reference to the object. Therefore, the generic functions that return object -references, like :cfunc:`PyObject_GetItem` and :cfunc:`PySequence_GetItem`, +references, like :c:func:`PyObject_GetItem` and :c:func:`PySequence_GetItem`, always return a new reference (the caller becomes the owner of the reference). It is important to realize that whether you own a reference returned by a function depends on which function you call only --- *the plumage* (the type of the object passed as an argument to the function) *doesn't enter into it!* -Thus, if you extract an item from a list using :cfunc:`PyList_GetItem`, you +Thus, if you extract an item from a list using :c:func:`PyList_GetItem`, you don't own the reference --- but if you obtain the same item from the same list -using :cfunc:`PySequence_GetItem` (which happens to take exactly the same +using :c:func:`PySequence_GetItem` (which happens to take exactly the same arguments), you do own a reference to the returned object. .. index:: @@ -286,8 +286,8 @@ arguments), you do own a reference to the returned object. single: PySequence_GetItem() Here is an example of how you could write a function that computes the sum of -the items in a list of integers; once using :cfunc:`PyList_GetItem`, and once -using :cfunc:`PySequence_GetItem`. :: +the items in a list of integers; once using :c:func:`PyList_GetItem`, and once +using :c:func:`PySequence_GetItem`. :: long sum_list(PyObject *list) @@ -340,8 +340,8 @@ Types ----- There are few other data types that play a significant role in the Python/C -API; most are simple C types such as :ctype:`int`, :ctype:`long`, -:ctype:`double` and :ctype:`char\*`. A few structure types are used to +API; most are simple C types such as :c:type:`int`, :c:type:`long`, +:c:type:`double` and :c:type:`char\*`. A few structure types are used to describe static tables used to list the functions exported by a module or the data attributes of a new object type, and another is used to describe the value of a complex number. These will be discussed together with the functions that @@ -370,7 +370,7 @@ indicator is either *NULL* or ``-1``, depending on the function's return type. A few functions return a Boolean true/false result, with false indicating an error. Very few functions return no explicit error indicator or have an ambiguous return value, and require explicit testing for errors with -:cfunc:`PyErr_Occurred`. These exceptions are always explicitly documented. +:c:func:`PyErr_Occurred`. These exceptions are always explicitly documented. .. index:: single: PyErr_SetString() @@ -379,11 +379,11 @@ ambiguous return value, and require explicit testing for errors with Exception state is maintained in per-thread storage (this is equivalent to using global storage in an unthreaded application). A thread can be in one of two states: an exception has occurred, or not. The function -:cfunc:`PyErr_Occurred` can be used to check for this: it returns a borrowed +:c:func:`PyErr_Occurred` can be used to check for this: it returns a borrowed reference to the exception type object when an exception has occurred, and *NULL* otherwise. There are a number of functions to set the exception state: -:cfunc:`PyErr_SetString` is the most common (though not the most general) -function to set the exception state, and :cfunc:`PyErr_Clear` clears the +:c:func:`PyErr_SetString` is the most common (though not the most general) +function to set the exception state, and :c:func:`PyErr_Clear` clears the exception state. .. index:: @@ -424,7 +424,7 @@ and lose important information about the exact cause of the error. .. index:: single: sum_sequence() A simple example of detecting exceptions and passing them on is shown in the -:cfunc:`sum_sequence` example above. It so happens that that example doesn't +:c:func:`sum_sequence` example above. It so happens that that example doesn't need to clean up any owned references when it detects an error. The following example function shows some error cleanup. First, to remind you why you like Python, we show the equivalent Python code:: @@ -491,10 +491,10 @@ Here is the corresponding C code, in all its glory:: single: Py_XDECREF() This example represents an endorsed use of the ``goto`` statement in C! -It illustrates the use of :cfunc:`PyErr_ExceptionMatches` and -:cfunc:`PyErr_Clear` to handle specific exceptions, and the use of -:cfunc:`Py_XDECREF` to dispose of owned references that may be *NULL* (note the -``'X'`` in the name; :cfunc:`Py_DECREF` would crash when confronted with a +It illustrates the use of :c:func:`PyErr_ExceptionMatches` and +:c:func:`PyErr_Clear` to handle specific exceptions, and the use of +:c:func:`Py_XDECREF` to dispose of owned references that may be *NULL* (note the +``'X'`` in the name; :c:func:`Py_DECREF` would crash when confronted with a *NULL* reference). It is important that the variables used to hold owned references are initialized to *NULL* for this to work; likewise, the proposed return value is initialized to ``-1`` (failure) and only set to success after @@ -520,20 +520,20 @@ interpreter can only be used after the interpreter has been initialized. triple: module; search; path single: path (in module sys) -The basic initialization function is :cfunc:`Py_Initialize`. This initializes +The basic initialization function is :c:func:`Py_Initialize`. This initializes the table of loaded modules, and creates the fundamental modules :mod:`__builtin__`, :mod:`__main__`, :mod:`sys`, and :mod:`exceptions`. It also initializes the module search path (``sys.path``). .. index:: single: PySys_SetArgvEx() -:cfunc:`Py_Initialize` does not set the "script argument list" (``sys.argv``). +:c:func:`Py_Initialize` does not set the "script argument list" (``sys.argv``). If this variable is needed by Python code that will be executed later, it must be set explicitly with a call to ``PySys_SetArgvEx(argc, argv, updatepath)`` -after the call to :cfunc:`Py_Initialize`. +after the call to :c:func:`Py_Initialize`. On most systems (in particular, on Unix and Windows, although the details are -slightly different), :cfunc:`Py_Initialize` calculates the module search path +slightly different), :c:func:`Py_Initialize` calculates the module search path based upon its best guess for the location of the standard Python interpreter executable, assuming that the Python library is found in a fixed location relative to the Python interpreter executable. In particular, it looks for a @@ -557,22 +557,22 @@ front of the standard path by setting :envvar:`PYTHONPATH`. single: Py_GetProgramFullPath() The embedding application can steer the search by calling -``Py_SetProgramName(file)`` *before* calling :cfunc:`Py_Initialize`. Note that +``Py_SetProgramName(file)`` *before* calling :c:func:`Py_Initialize`. Note that :envvar:`PYTHONHOME` still overrides this and :envvar:`PYTHONPATH` is still inserted in front of the standard path. An application that requires total -control has to provide its own implementation of :cfunc:`Py_GetPath`, -:cfunc:`Py_GetPrefix`, :cfunc:`Py_GetExecPrefix`, and -:cfunc:`Py_GetProgramFullPath` (all defined in :file:`Modules/getpath.c`). +control has to provide its own implementation of :c:func:`Py_GetPath`, +:c:func:`Py_GetPrefix`, :c:func:`Py_GetExecPrefix`, and +:c:func:`Py_GetProgramFullPath` (all defined in :file:`Modules/getpath.c`). .. index:: single: Py_IsInitialized() Sometimes, it is desirable to "uninitialize" Python. For instance, the application may want to start over (make another call to -:cfunc:`Py_Initialize`) or the application is simply done with its use of +:c:func:`Py_Initialize`) or the application is simply done with its use of Python and wants to free memory allocated by Python. This can be accomplished -by calling :cfunc:`Py_Finalize`. The function :cfunc:`Py_IsInitialized` returns +by calling :c:func:`Py_Finalize`. The function :c:func:`Py_IsInitialized` returns true if Python is currently in the initialized state. More information about -these functions is given in a later chapter. Notice that :cfunc:`Py_Finalize` +these functions is given in a later chapter. Notice that :c:func:`Py_Finalize` does *not* free all memory allocated by the Python interpreter, e.g. memory allocated by extension modules currently cannot be released. @@ -592,11 +592,11 @@ available that support tracing of reference counts, debugging the memory allocator, or low-level profiling of the main interpreter loop. Only the most frequently-used builds will be described in the remainder of this section. -Compiling the interpreter with the :cmacro:`Py_DEBUG` macro defined produces -what is generally meant by "a debug build" of Python. :cmacro:`Py_DEBUG` is +Compiling the interpreter with the :c:macro:`Py_DEBUG` macro defined produces +what is generally meant by "a debug build" of Python. :c:macro:`Py_DEBUG` is enabled in the Unix build by adding ``--with-pydebug`` to the :file:`./configure` command. It is also implied by the presence of the -not-Python-specific :cmacro:`_DEBUG` macro. When :cmacro:`Py_DEBUG` is enabled +not-Python-specific :c:macro:`_DEBUG` macro. When :c:macro:`Py_DEBUG` is enabled in the Unix build, compiler optimization is disabled. In addition to the reference count debugging described below, the following @@ -625,11 +625,11 @@ extra checks are performed: There may be additional checks not mentioned here. -Defining :cmacro:`Py_TRACE_REFS` enables reference tracing. When defined, a +Defining :c:macro:`Py_TRACE_REFS` enables reference tracing. When defined, a circular doubly linked list of active objects is maintained by adding two extra -fields to every :ctype:`PyObject`. Total allocations are tracked as well. Upon +fields to every :c:type:`PyObject`. Total allocations are tracked as well. Upon exit, all existing references are printed. (In interactive mode this happens -after every statement run by the interpreter.) Implied by :cmacro:`Py_DEBUG`. +after every statement run by the interpreter.) Implied by :c:macro:`Py_DEBUG`. Please refer to :file:`Misc/SpecialBuilds.txt` in the Python source distribution for more detailed information. diff --git a/Doc/c-api/iter.rst b/Doc/c-api/iter.rst index 560cd93..88ac0c1 100644 --- a/Doc/c-api/iter.rst +++ b/Doc/c-api/iter.rst @@ -10,12 +10,12 @@ Iterator Protocol There are only a couple of functions specifically for working with iterators. -.. cfunction:: int PyIter_Check(PyObject *o) +.. c:function:: int PyIter_Check(PyObject *o) Return true if the object *o* supports the iterator protocol. -.. cfunction:: PyObject* PyIter_Next(PyObject *o) +.. c:function:: PyObject* PyIter_Next(PyObject *o) Return the next value from the iteration *o*. If the object is an iterator, this retrieves the next value from the iteration, and returns *NULL* with no diff --git a/Doc/c-api/iterator.rst b/Doc/c-api/iterator.rst index cd2fa33..3931bb9 100644 --- a/Doc/c-api/iterator.rst +++ b/Doc/c-api/iterator.rst @@ -12,23 +12,23 @@ the callable for each item in the sequence, and ending the iteration when the sentinel value is returned. -.. cvar:: PyTypeObject PySeqIter_Type +.. c:var:: PyTypeObject PySeqIter_Type - Type object for iterator objects returned by :cfunc:`PySeqIter_New` and the + Type object for iterator objects returned by :c:func:`PySeqIter_New` and the one-argument form of the :func:`iter` built-in function for built-in sequence types. .. versionadded:: 2.2 -.. cfunction:: int PySeqIter_Check(op) +.. c:function:: int PySeqIter_Check(op) - Return true if the type of *op* is :cdata:`PySeqIter_Type`. + Return true if the type of *op* is :c:data:`PySeqIter_Type`. .. versionadded:: 2.2 -.. cfunction:: PyObject* PySeqIter_New(PyObject *seq) +.. c:function:: PyObject* PySeqIter_New(PyObject *seq) Return an iterator that works with a general sequence object, *seq*. The iteration ends when the sequence raises :exc:`IndexError` for the subscripting @@ -37,22 +37,22 @@ sentinel value is returned. .. versionadded:: 2.2 -.. cvar:: PyTypeObject PyCallIter_Type +.. c:var:: PyTypeObject PyCallIter_Type - Type object for iterator objects returned by :cfunc:`PyCallIter_New` and the + Type object for iterator objects returned by :c:func:`PyCallIter_New` and the two-argument form of the :func:`iter` built-in function. .. versionadded:: 2.2 -.. cfunction:: int PyCallIter_Check(op) +.. c:function:: int PyCallIter_Check(op) - Return true if the type of *op* is :cdata:`PyCallIter_Type`. + Return true if the type of *op* is :c:data:`PyCallIter_Type`. .. versionadded:: 2.2 -.. cfunction:: PyObject* PyCallIter_New(PyObject *callable, PyObject *sentinel) +.. c:function:: PyObject* PyCallIter_New(PyObject *callable, PyObject *sentinel) Return a new iterator. The first parameter, *callable*, can be any Python callable object that can be called with no parameters; each call to it should diff --git a/Doc/c-api/list.rst b/Doc/c-api/list.rst index d24aa72..0aed0f3 100644 --- a/Doc/c-api/list.rst +++ b/Doc/c-api/list.rst @@ -8,18 +8,18 @@ List Objects .. index:: object: list -.. ctype:: PyListObject +.. c:type:: PyListObject - This subtype of :ctype:`PyObject` represents a Python list object. + This subtype of :c:type:`PyObject` represents a Python list object. -.. cvar:: PyTypeObject PyList_Type +.. c:var:: PyTypeObject PyList_Type - This instance of :ctype:`PyTypeObject` represents the Python list type. This + This instance of :c:type:`PyTypeObject` represents the Python list type. This is the same object as ``list`` in the Python layer. -.. cfunction:: int PyList_Check(PyObject *p) +.. c:function:: int PyList_Check(PyObject *p) Return true if *p* is a list object or an instance of a subtype of the list type. @@ -28,7 +28,7 @@ List Objects Allowed subtypes to be accepted. -.. cfunction:: int PyList_CheckExact(PyObject *p) +.. c:function:: int PyList_CheckExact(PyObject *p) Return true if *p* is a list object, but not an instance of a subtype of the list type. @@ -36,7 +36,7 @@ List Objects .. versionadded:: 2.2 -.. cfunction:: PyObject* PyList_New(Py_ssize_t len) +.. c:function:: PyObject* PyList_New(Py_ssize_t len) Return a new list of length *len* on success, or *NULL* on failure. @@ -44,15 +44,15 @@ List Objects If *len* is greater than zero, the returned list object's items are set to ``NULL``. Thus you cannot use abstract API functions such as - :cfunc:`PySequence_SetItem` or expose the object to Python code before - setting all items to a real object with :cfunc:`PyList_SetItem`. + :c:func:`PySequence_SetItem` or expose the object to Python code before + setting all items to a real object with :c:func:`PyList_SetItem`. .. versionchanged:: 2.5 - This function used an :ctype:`int` for *size*. This might require + This function used an :c:type:`int` for *size*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: Py_ssize_t PyList_Size(PyObject *list) +.. c:function:: Py_ssize_t PyList_Size(PyObject *list) .. index:: builtin: len @@ -60,20 +60,20 @@ List Objects ``len(list)`` on a list object. .. versionchanged:: 2.5 - This function returned an :ctype:`int`. This might require changes in + This function returned an :c:type:`int`. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: Py_ssize_t PyList_GET_SIZE(PyObject *list) +.. c:function:: Py_ssize_t PyList_GET_SIZE(PyObject *list) - Macro form of :cfunc:`PyList_Size` without error checking. + Macro form of :c:func:`PyList_Size` without error checking. .. versionchanged:: 2.5 - This macro returned an :ctype:`int`. This might require changes in your + This macro returned an :c:type:`int`. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: PyObject* PyList_GetItem(PyObject *list, Py_ssize_t index) +.. c:function:: PyObject* PyList_GetItem(PyObject *list, Py_ssize_t index) Return the object at position *index* in the list pointed to by *list*. The position must be positive, indexing from the end of the list is not @@ -81,20 +81,20 @@ List Objects :exc:`IndexError` exception. .. versionchanged:: 2.5 - This function used an :ctype:`int` for *index*. This might require + This function used an :c:type:`int` for *index*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: PyObject* PyList_GET_ITEM(PyObject *list, Py_ssize_t i) +.. c:function:: PyObject* PyList_GET_ITEM(PyObject *list, Py_ssize_t i) - Macro form of :cfunc:`PyList_GetItem` without error checking. + Macro form of :c:func:`PyList_GetItem` without error checking. .. versionchanged:: 2.5 - This macro used an :ctype:`int` for *i*. This might require changes in + This macro used an :c:type:`int` for *i*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: int PyList_SetItem(PyObject *list, Py_ssize_t index, PyObject *item) +.. c:function:: int PyList_SetItem(PyObject *list, Py_ssize_t index, PyObject *item) Set the item at index *index* in list to *item*. Return ``0`` on success or ``-1`` on failure. @@ -105,46 +105,46 @@ List Objects an item already in the list at the affected position. .. versionchanged:: 2.5 - This function used an :ctype:`int` for *index*. This might require + This function used an :c:type:`int` for *index*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: void PyList_SET_ITEM(PyObject *list, Py_ssize_t i, PyObject *o) +.. c:function:: void PyList_SET_ITEM(PyObject *list, Py_ssize_t i, PyObject *o) - Macro form of :cfunc:`PyList_SetItem` without error checking. This is + Macro form of :c:func:`PyList_SetItem` without error checking. This is normally only used to fill in new lists where there is no previous content. .. note:: This macro "steals" a reference to *item*, and, unlike - :cfunc:`PyList_SetItem`, does *not* discard a reference to any item that + :c:func:`PyList_SetItem`, does *not* discard a reference to any item that it being replaced; any reference in *list* at position *i* will be leaked. .. versionchanged:: 2.5 - This macro used an :ctype:`int` for *i*. This might require + This macro used an :c:type:`int` for *i*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: int PyList_Insert(PyObject *list, Py_ssize_t index, PyObject *item) +.. c:function:: int PyList_Insert(PyObject *list, Py_ssize_t index, PyObject *item) Insert the item *item* into list *list* in front of index *index*. Return ``0`` if successful; return ``-1`` and set an exception if unsuccessful. Analogous to ``list.insert(index, item)``. .. versionchanged:: 2.5 - This function used an :ctype:`int` for *index*. This might require + This function used an :c:type:`int` for *index*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: int PyList_Append(PyObject *list, PyObject *item) +.. c:function:: int PyList_Append(PyObject *list, PyObject *item) Append the object *item* at the end of list *list*. Return ``0`` if successful; return ``-1`` and set an exception if unsuccessful. Analogous to ``list.append(item)``. -.. cfunction:: PyObject* PyList_GetSlice(PyObject *list, Py_ssize_t low, Py_ssize_t high) +.. c:function:: PyObject* PyList_GetSlice(PyObject *list, Py_ssize_t low, Py_ssize_t high) Return a list of the objects in *list* containing the objects *between* *low* and *high*. Return *NULL* and set an exception if unsuccessful. Analogous @@ -152,11 +152,11 @@ List Objects supported. .. versionchanged:: 2.5 - This function used an :ctype:`int` for *low* and *high*. This might + This function used an :c:type:`int` for *low* and *high*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: int PyList_SetSlice(PyObject *list, Py_ssize_t low, Py_ssize_t high, PyObject *itemlist) +.. c:function:: int PyList_SetSlice(PyObject *list, Py_ssize_t low, Py_ssize_t high, PyObject *itemlist) Set the slice of *list* between *low* and *high* to the contents of *itemlist*. Analogous to ``list[low:high] = itemlist``. The *itemlist* may @@ -165,23 +165,23 @@ List Objects slicing from Python, are not supported. .. versionchanged:: 2.5 - This function used an :ctype:`int` for *low* and *high*. This might + This function used an :c:type:`int` for *low* and *high*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: int PyList_Sort(PyObject *list) +.. c:function:: int PyList_Sort(PyObject *list) Sort the items of *list* in place. Return ``0`` on success, ``-1`` on failure. This is equivalent to ``list.sort()``. -.. cfunction:: int PyList_Reverse(PyObject *list) +.. c:function:: int PyList_Reverse(PyObject *list) Reverse the items of *list* in place. Return ``0`` on success, ``-1`` on failure. This is the equivalent of ``list.reverse()``. -.. cfunction:: PyObject* PyList_AsTuple(PyObject *list) +.. c:function:: PyObject* PyList_AsTuple(PyObject *list) .. index:: builtin: tuple diff --git a/Doc/c-api/long.rst b/Doc/c-api/long.rst index 11d2908..5a8e51d 100644 --- a/Doc/c-api/long.rst +++ b/Doc/c-api/long.rst @@ -8,100 +8,100 @@ Long Integer Objects .. index:: object: long integer -.. ctype:: PyLongObject +.. c:type:: PyLongObject - This subtype of :ctype:`PyObject` represents a Python long integer object. + This subtype of :c:type:`PyObject` represents a Python long integer object. -.. cvar:: PyTypeObject PyLong_Type +.. c:var:: PyTypeObject PyLong_Type .. index:: single: LongType (in modules types) - This instance of :ctype:`PyTypeObject` represents the Python long integer type. + This instance of :c:type:`PyTypeObject` represents the Python long integer type. This is the same object as ``long`` and ``types.LongType``. -.. cfunction:: int PyLong_Check(PyObject *p) +.. c:function:: int PyLong_Check(PyObject *p) - Return true if its argument is a :ctype:`PyLongObject` or a subtype of - :ctype:`PyLongObject`. + Return true if its argument is a :c:type:`PyLongObject` or a subtype of + :c:type:`PyLongObject`. .. versionchanged:: 2.2 Allowed subtypes to be accepted. -.. cfunction:: int PyLong_CheckExact(PyObject *p) +.. c:function:: int PyLong_CheckExact(PyObject *p) - Return true if its argument is a :ctype:`PyLongObject`, but not a subtype of - :ctype:`PyLongObject`. + Return true if its argument is a :c:type:`PyLongObject`, but not a subtype of + :c:type:`PyLongObject`. .. versionadded:: 2.2 -.. cfunction:: PyObject* PyLong_FromLong(long v) +.. c:function:: PyObject* PyLong_FromLong(long v) - Return a new :ctype:`PyLongObject` object from *v*, or *NULL* on failure. + Return a new :c:type:`PyLongObject` object from *v*, or *NULL* on failure. -.. cfunction:: PyObject* PyLong_FromUnsignedLong(unsigned long v) +.. c:function:: PyObject* PyLong_FromUnsignedLong(unsigned long v) - Return a new :ctype:`PyLongObject` object from a C :ctype:`unsigned long`, or + Return a new :c:type:`PyLongObject` object from a C :c:type:`unsigned long`, or *NULL* on failure. -.. cfunction:: PyObject* PyLong_FromSsize_t(Py_ssize_t v) +.. c:function:: PyObject* PyLong_FromSsize_t(Py_ssize_t v) - Return a new :ctype:`PyLongObject` object from a C :ctype:`Py_ssize_t`, or + Return a new :c:type:`PyLongObject` object from a C :c:type:`Py_ssize_t`, or *NULL* on failure. .. versionadded:: 2.6 -.. cfunction:: PyObject* PyLong_FromSize_t(size_t v) +.. c:function:: PyObject* PyLong_FromSize_t(size_t v) - Return a new :ctype:`PyLongObject` object from a C :ctype:`size_t`, or + Return a new :c:type:`PyLongObject` object from a C :c:type:`size_t`, or *NULL* on failure. .. versionadded:: 2.6 -.. cfunction:: PyObject* PyLong_FromSsize_t(Py_ssize_t v) +.. c:function:: PyObject* PyLong_FromSsize_t(Py_ssize_t v) - Return a new :ctype:`PyLongObject` object with a value of *v*, or *NULL* + Return a new :c:type:`PyLongObject` object with a value of *v*, or *NULL* on failure. .. versionadded:: 2.6 -.. cfunction:: PyObject* PyLong_FromSize_t(size_t v) +.. c:function:: PyObject* PyLong_FromSize_t(size_t v) - Return a new :ctype:`PyLongObject` object with a value of *v*, or *NULL* + Return a new :c:type:`PyLongObject` object with a value of *v*, or *NULL* on failure. .. versionadded:: 2.6 -.. cfunction:: PyObject* PyLong_FromLongLong(PY_LONG_LONG v) +.. c:function:: PyObject* PyLong_FromLongLong(PY_LONG_LONG v) - Return a new :ctype:`PyLongObject` object from a C :ctype:`long long`, or *NULL* + Return a new :c:type:`PyLongObject` object from a C :c:type:`long long`, or *NULL* on failure. -.. cfunction:: PyObject* PyLong_FromUnsignedLongLong(unsigned PY_LONG_LONG v) +.. c:function:: PyObject* PyLong_FromUnsignedLongLong(unsigned PY_LONG_LONG v) - Return a new :ctype:`PyLongObject` object from a C :ctype:`unsigned long long`, + Return a new :c:type:`PyLongObject` object from a C :c:type:`unsigned long long`, or *NULL* on failure. -.. cfunction:: PyObject* PyLong_FromDouble(double v) +.. c:function:: PyObject* PyLong_FromDouble(double v) - Return a new :ctype:`PyLongObject` object from the integer part of *v*, or + Return a new :c:type:`PyLongObject` object from the integer part of *v*, or *NULL* on failure. -.. cfunction:: PyObject* PyLong_FromString(char *str, char **pend, int base) +.. c:function:: PyObject* PyLong_FromString(char *str, char **pend, int base) - Return a new :ctype:`PyLongObject` based on the string value in *str*, which is + Return a new :c:type:`PyLongObject` based on the string value in *str*, which is interpreted according to the radix in *base*. If *pend* is non-*NULL*, *\*pend* will point to the first character in *str* which follows the representation of the number. If *base* is ``0``, the radix will be determined @@ -112,7 +112,7 @@ Long Integer Objects no digits, :exc:`ValueError` will be raised. -.. cfunction:: PyObject* PyLong_FromUnicode(Py_UNICODE *u, Py_ssize_t length, int base) +.. c:function:: PyObject* PyLong_FromUnicode(Py_UNICODE *u, Py_ssize_t length, int base) Convert a sequence of Unicode digits to a Python long integer value. The first parameter, *u*, points to the first character of the Unicode string, *length* @@ -123,14 +123,14 @@ Long Integer Objects .. versionadded:: 1.6 .. versionchanged:: 2.5 - This function used an :ctype:`int` for *length*. This might require + This function used an :c:type:`int` for *length*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: PyObject* PyLong_FromVoidPtr(void *p) +.. c:function:: PyObject* PyLong_FromVoidPtr(void *p) Create a Python integer or long integer from the pointer *p*. The pointer value - can be retrieved from the resulting value using :cfunc:`PyLong_AsVoidPtr`. + can be retrieved from the resulting value using :c:func:`PyLong_AsVoidPtr`. .. versionadded:: 1.5.2 @@ -138,20 +138,20 @@ Long Integer Objects If the integer is larger than LONG_MAX, a positive long integer is returned. -.. cfunction:: long PyLong_AsLong(PyObject *pylong) +.. c:function:: long PyLong_AsLong(PyObject *pylong) .. index:: single: LONG_MAX single: OverflowError (built-in exception) - Return a C :ctype:`long` representation of the contents of *pylong*. If + Return a C :c:type:`long` representation of the contents of *pylong*. If *pylong* is greater than :const:`LONG_MAX`, an :exc:`OverflowError` is raised and ``-1`` will be returned. -.. cfunction:: long PyLong_AsLongAndOverflow(PyObject *pylong, int *overflow) +.. c:function:: long PyLong_AsLongAndOverflow(PyObject *pylong, int *overflow) - Return a C :ctype:`long` representation of the contents of + Return a C :c:type:`long` representation of the contents of *pylong*. If *pylong* is greater than :const:`LONG_MAX` or less than :const:`LONG_MIN`, set *\*overflow* to ``1`` or ``-1``, respectively, and return ``-1``; otherwise, set *\*overflow* to @@ -162,9 +162,9 @@ Long Integer Objects .. versionadded:: 2.7 -.. cfunction:: PY_LONG_LONG PyLong_AsLongLongAndOverflow(PyObject *pylong, int *overflow) +.. c:function:: PY_LONG_LONG PyLong_AsLongLongAndOverflow(PyObject *pylong, int *overflow) - Return a C :ctype:`long long` representation of the contents of + Return a C :c:type:`long long` representation of the contents of *pylong*. If *pylong* is greater than :const:`PY_LLONG_MAX` or less than :const:`PY_LLONG_MIN`, set *\*overflow* to ``1`` or ``-1``, respectively, and return ``-1``; otherwise, set *\*overflow* to @@ -175,61 +175,61 @@ Long Integer Objects .. versionadded:: 2.7 -.. cfunction:: Py_ssize_t PyLong_AsSsize_t(PyObject *pylong) +.. c:function:: Py_ssize_t PyLong_AsSsize_t(PyObject *pylong) .. index:: single: PY_SSIZE_T_MAX single: OverflowError (built-in exception) - Return a C :ctype:`Py_ssize_t` representation of the contents of *pylong*. If + Return a C :c:type:`Py_ssize_t` representation of the contents of *pylong*. If *pylong* is greater than :const:`PY_SSIZE_T_MAX`, an :exc:`OverflowError` is raised and ``-1`` will be returned. .. versionadded:: 2.6 -.. cfunction:: unsigned long PyLong_AsUnsignedLong(PyObject *pylong) +.. c:function:: unsigned long PyLong_AsUnsignedLong(PyObject *pylong) .. index:: single: ULONG_MAX single: OverflowError (built-in exception) - Return a C :ctype:`unsigned long` representation of the contents of *pylong*. + Return a C :c:type:`unsigned long` representation of the contents of *pylong*. If *pylong* is greater than :const:`ULONG_MAX`, an :exc:`OverflowError` is raised. -.. cfunction:: Py_ssize_t PyLong_AsSsize_t(PyObject *pylong) +.. c:function:: Py_ssize_t PyLong_AsSsize_t(PyObject *pylong) .. index:: single: PY_SSIZE_T_MAX - Return a :ctype:`Py_ssize_t` representation of the contents of *pylong*. If + Return a :c:type:`Py_ssize_t` representation of the contents of *pylong*. If *pylong* is greater than :const:`PY_SSIZE_T_MAX`, an :exc:`OverflowError` is raised. .. versionadded:: 2.6 -.. cfunction:: PY_LONG_LONG PyLong_AsLongLong(PyObject *pylong) +.. c:function:: PY_LONG_LONG PyLong_AsLongLong(PyObject *pylong) .. index:: single: OverflowError (built-in exception) - Return a C :ctype:`long long` from a Python long integer. If - *pylong* cannot be represented as a :ctype:`long long`, an + Return a C :c:type:`long long` from a Python long integer. If + *pylong* cannot be represented as a :c:type:`long long`, an :exc:`OverflowError` is raised and ``-1`` is returned. .. versionadded:: 2.2 -.. cfunction:: unsigned PY_LONG_LONG PyLong_AsUnsignedLongLong(PyObject *pylong) +.. c:function:: unsigned PY_LONG_LONG PyLong_AsUnsignedLongLong(PyObject *pylong) .. index:: single: OverflowError (built-in exception) - Return a C :ctype:`unsigned long long` from a Python long integer. If - *pylong* cannot be represented as an :ctype:`unsigned long long`, an + Return a C :c:type:`unsigned long long` from a Python long integer. If + *pylong* cannot be represented as an :c:type:`unsigned long long`, an :exc:`OverflowError` is raised and ``(unsigned long long)-1`` is returned. @@ -240,35 +240,35 @@ Long Integer Objects :exc:`TypeError`. -.. cfunction:: unsigned long PyLong_AsUnsignedLongMask(PyObject *io) +.. c:function:: unsigned long PyLong_AsUnsignedLongMask(PyObject *io) - Return a C :ctype:`unsigned long` from a Python long integer, without checking + Return a C :c:type:`unsigned long` from a Python long integer, without checking for overflow. .. versionadded:: 2.3 -.. cfunction:: unsigned PY_LONG_LONG PyLong_AsUnsignedLongLongMask(PyObject *io) +.. c:function:: unsigned PY_LONG_LONG PyLong_AsUnsignedLongLongMask(PyObject *io) - Return a C :ctype:`unsigned long long` from a Python long integer, without + Return a C :c:type:`unsigned long long` from a Python long integer, without checking for overflow. .. versionadded:: 2.3 -.. cfunction:: double PyLong_AsDouble(PyObject *pylong) +.. c:function:: double PyLong_AsDouble(PyObject *pylong) - Return a C :ctype:`double` representation of the contents of *pylong*. If - *pylong* cannot be approximately represented as a :ctype:`double`, an + Return a C :c:type:`double` representation of the contents of *pylong*. If + *pylong* cannot be approximately represented as a :c:type:`double`, an :exc:`OverflowError` exception is raised and ``-1.0`` will be returned. -.. cfunction:: void* PyLong_AsVoidPtr(PyObject *pylong) +.. c:function:: void* PyLong_AsVoidPtr(PyObject *pylong) - Convert a Python integer or long integer *pylong* to a C :ctype:`void` pointer. + Convert a Python integer or long integer *pylong* to a C :c:type:`void` pointer. If *pylong* cannot be converted, an :exc:`OverflowError` will be raised. This - is only assured to produce a usable :ctype:`void` pointer for values created - with :cfunc:`PyLong_FromVoidPtr`. + is only assured to produce a usable :c:type:`void` pointer for values created + with :c:func:`PyLong_FromVoidPtr`. .. versionadded:: 1.5.2 diff --git a/Doc/c-api/mapping.rst b/Doc/c-api/mapping.rst index 78787e3..7a83a50 100644 --- a/Doc/c-api/mapping.rst +++ b/Doc/c-api/mapping.rst @@ -6,13 +6,13 @@ Mapping Protocol ================ -.. cfunction:: int PyMapping_Check(PyObject *o) +.. c:function:: int PyMapping_Check(PyObject *o) Return ``1`` if the object provides mapping protocol, and ``0`` otherwise. This function always succeeds. -.. cfunction:: Py_ssize_t PyMapping_Size(PyObject *o) +.. c:function:: Py_ssize_t PyMapping_Size(PyObject *o) Py_ssize_t PyMapping_Length(PyObject *o) .. index:: builtin: len @@ -22,62 +22,62 @@ Mapping Protocol expression ``len(o)``. .. versionchanged:: 2.5 - These functions returned an :ctype:`int` type. This might require + These functions returned an :c:type:`int` type. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: int PyMapping_DelItemString(PyObject *o, char *key) +.. c:function:: int PyMapping_DelItemString(PyObject *o, char *key) Remove the mapping for object *key* from the object *o*. Return ``-1`` on failure. This is equivalent to the Python statement ``del o[key]``. -.. cfunction:: int PyMapping_DelItem(PyObject *o, PyObject *key) +.. c:function:: int PyMapping_DelItem(PyObject *o, PyObject *key) Remove the mapping for object *key* from the object *o*. Return ``-1`` on failure. This is equivalent to the Python statement ``del o[key]``. -.. cfunction:: int PyMapping_HasKeyString(PyObject *o, char *key) +.. c:function:: int PyMapping_HasKeyString(PyObject *o, char *key) On success, return ``1`` if the mapping object has the key *key* and ``0`` otherwise. This is equivalent to ``o[key]``, returning ``True`` on success and ``False`` on an exception. This function always succeeds. -.. cfunction:: int PyMapping_HasKey(PyObject *o, PyObject *key) +.. c:function:: int PyMapping_HasKey(PyObject *o, PyObject *key) Return ``1`` if the mapping object has the key *key* and ``0`` otherwise. This is equivalent to ``o[key]``, returning ``True`` on success and ``False`` on an exception. This function always succeeds. -.. cfunction:: PyObject* PyMapping_Keys(PyObject *o) +.. c:function:: PyObject* PyMapping_Keys(PyObject *o) On success, return a list of the keys in object *o*. On failure, return *NULL*. This is equivalent to the Python expression ``o.keys()``. -.. cfunction:: PyObject* PyMapping_Values(PyObject *o) +.. c:function:: PyObject* PyMapping_Values(PyObject *o) On success, return a list of the values in object *o*. On failure, return *NULL*. This is equivalent to the Python expression ``o.values()``. -.. cfunction:: PyObject* PyMapping_Items(PyObject *o) +.. c:function:: PyObject* PyMapping_Items(PyObject *o) On success, return a list of the items in object *o*, where each item is a tuple containing a key-value pair. On failure, return *NULL*. This is equivalent to the Python expression ``o.items()``. -.. cfunction:: PyObject* PyMapping_GetItemString(PyObject *o, char *key) +.. c:function:: PyObject* PyMapping_GetItemString(PyObject *o, char *key) Return element of *o* corresponding to the object *key* or *NULL* on failure. This is the equivalent of the Python expression ``o[key]``. -.. cfunction:: int PyMapping_SetItemString(PyObject *o, char *key, PyObject *v) +.. c:function:: int PyMapping_SetItemString(PyObject *o, char *key, PyObject *v) Map the object *key* to the value *v* in object *o*. Returns ``-1`` on failure. This is the equivalent of the Python statement ``o[key] = v``. diff --git a/Doc/c-api/marshal.rst b/Doc/c-api/marshal.rst index 34a83f4..b82cc96 100644 --- a/Doc/c-api/marshal.rst +++ b/Doc/c-api/marshal.rst @@ -20,17 +20,17 @@ format for floating point numbers. *Py_MARSHAL_VERSION* indicates the current file format (currently 2). -.. cfunction:: void PyMarshal_WriteLongToFile(long value, FILE *file, int version) +.. c:function:: void PyMarshal_WriteLongToFile(long value, FILE *file, int version) - Marshal a :ctype:`long` integer, *value*, to *file*. This will only write + Marshal a :c:type:`long` integer, *value*, to *file*. This will only write the least-significant 32 bits of *value*; regardless of the size of the - native :ctype:`long` type. + native :c:type:`long` type. .. versionchanged:: 2.4 *version* indicates the file format. -.. cfunction:: void PyMarshal_WriteObjectToFile(PyObject *value, FILE *file, int version) +.. c:function:: void PyMarshal_WriteObjectToFile(PyObject *value, FILE *file, int version) Marshal a Python object, *value*, to *file*. @@ -38,7 +38,7 @@ file format (currently 2). *version* indicates the file format. -.. cfunction:: PyObject* PyMarshal_WriteObjectToString(PyObject *value, int version) +.. c:function:: PyObject* PyMarshal_WriteObjectToString(PyObject *value, int version) Return a string object containing the marshalled representation of *value*. @@ -55,31 +55,31 @@ no error. What's the right way to tell? Should only non-negative values be written using these routines? -.. cfunction:: long PyMarshal_ReadLongFromFile(FILE *file) +.. c:function:: long PyMarshal_ReadLongFromFile(FILE *file) - Return a C :ctype:`long` from the data stream in a :ctype:`FILE\*` opened + Return a C :c:type:`long` from the data stream in a :c:type:`FILE\*` opened for reading. Only a 32-bit value can be read in using this function, - regardless of the native size of :ctype:`long`. + regardless of the native size of :c:type:`long`. -.. cfunction:: int PyMarshal_ReadShortFromFile(FILE *file) +.. c:function:: int PyMarshal_ReadShortFromFile(FILE *file) - Return a C :ctype:`short` from the data stream in a :ctype:`FILE\*` opened + Return a C :c:type:`short` from the data stream in a :c:type:`FILE\*` opened for reading. Only a 16-bit value can be read in using this function, - regardless of the native size of :ctype:`short`. + regardless of the native size of :c:type:`short`. -.. cfunction:: PyObject* PyMarshal_ReadObjectFromFile(FILE *file) +.. c:function:: PyObject* PyMarshal_ReadObjectFromFile(FILE *file) - Return a Python object from the data stream in a :ctype:`FILE\*` opened for + Return a Python object from the data stream in a :c:type:`FILE\*` opened for reading. On error, sets the appropriate exception (:exc:`EOFError` or :exc:`TypeError`) and returns *NULL*. -.. cfunction:: PyObject* PyMarshal_ReadLastObjectFromFile(FILE *file) +.. c:function:: PyObject* PyMarshal_ReadLastObjectFromFile(FILE *file) - Return a Python object from the data stream in a :ctype:`FILE\*` opened for - reading. Unlike :cfunc:`PyMarshal_ReadObjectFromFile`, this function + Return a Python object from the data stream in a :c:type:`FILE\*` opened for + reading. Unlike :c:func:`PyMarshal_ReadObjectFromFile`, this function assumes that no further objects will be read from the file, allowing it to aggressively load file data into memory so that the de-serialization can operate from data in memory rather than reading a byte at a time from the @@ -88,7 +88,7 @@ written using these routines? (:exc:`EOFError` or :exc:`TypeError`) and returns *NULL*. -.. cfunction:: PyObject* PyMarshal_ReadObjectFromString(char *string, Py_ssize_t len) +.. c:function:: PyObject* PyMarshal_ReadObjectFromString(char *string, Py_ssize_t len) Return a Python object from the data stream in a character buffer containing *len* bytes pointed to by *string*. On error, sets the @@ -96,5 +96,5 @@ written using these routines? *NULL*. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *len*. This might require + This function used an :c:type:`int` type for *len*. This might require changes in your code for properly supporting 64-bit systems. diff --git a/Doc/c-api/memory.rst b/Doc/c-api/memory.rst index 81d7cd9..b80b3d5 100644 --- a/Doc/c-api/memory.rst +++ b/Doc/c-api/memory.rst @@ -47,8 +47,8 @@ API functions listed in this document. single: free() To avoid memory corruption, extension writers should never try to operate on -Python objects with the functions exported by the C library: :cfunc:`malloc`, -:cfunc:`calloc`, :cfunc:`realloc` and :cfunc:`free`. This will result in mixed +Python objects with the functions exported by the C library: :c:func:`malloc`, +:c:func:`calloc`, :c:func:`realloc` and :c:func:`free`. This will result in mixed calls between the C allocator and the Python memory manager with fatal consequences, because they implement different algorithms and operate on different heaps. However, one may safely allocate and release memory blocks @@ -94,65 +94,65 @@ behavior when requesting zero bytes, are available for allocating and releasing memory from the Python heap: -.. cfunction:: void* PyMem_Malloc(size_t n) +.. c:function:: void* PyMem_Malloc(size_t n) - Allocates *n* bytes and returns a pointer of type :ctype:`void\*` to the + Allocates *n* bytes and returns a pointer of type :c:type:`void\*` to the allocated memory, or *NULL* if the request fails. Requesting zero bytes returns - a distinct non-*NULL* pointer if possible, as if :cfunc:`PyMem_Malloc(1)` had + a distinct non-*NULL* pointer if possible, as if :c:func:`PyMem_Malloc(1)` had been called instead. The memory will not have been initialized in any way. -.. cfunction:: void* PyMem_Realloc(void *p, size_t n) +.. c:function:: void* PyMem_Realloc(void *p, size_t n) Resizes the memory block pointed to by *p* to *n* bytes. The contents will be unchanged to the minimum of the old and the new sizes. If *p* is *NULL*, the - call is equivalent to :cfunc:`PyMem_Malloc(n)`; else if *n* is equal to zero, + call is equivalent to :c:func:`PyMem_Malloc(n)`; else if *n* is equal to zero, the memory block is resized but is not freed, and the returned pointer is non-*NULL*. Unless *p* is *NULL*, it must have been returned by a previous call - to :cfunc:`PyMem_Malloc` or :cfunc:`PyMem_Realloc`. If the request fails, - :cfunc:`PyMem_Realloc` returns *NULL* and *p* remains a valid pointer to the + to :c:func:`PyMem_Malloc` or :c:func:`PyMem_Realloc`. If the request fails, + :c:func:`PyMem_Realloc` returns *NULL* and *p* remains a valid pointer to the previous memory area. -.. cfunction:: void PyMem_Free(void *p) +.. c:function:: void PyMem_Free(void *p) Frees the memory block pointed to by *p*, which must have been returned by a - previous call to :cfunc:`PyMem_Malloc` or :cfunc:`PyMem_Realloc`. Otherwise, or - if :cfunc:`PyMem_Free(p)` has been called before, undefined behavior occurs. If + previous call to :c:func:`PyMem_Malloc` or :c:func:`PyMem_Realloc`. Otherwise, or + if :c:func:`PyMem_Free(p)` has been called before, undefined behavior occurs. If *p* is *NULL*, no operation is performed. The following type-oriented macros are provided for convenience. Note that *TYPE* refers to any C type. -.. cfunction:: TYPE* PyMem_New(TYPE, size_t n) +.. c:function:: TYPE* PyMem_New(TYPE, size_t n) - Same as :cfunc:`PyMem_Malloc`, but allocates ``(n * sizeof(TYPE))`` bytes of - memory. Returns a pointer cast to :ctype:`TYPE\*`. The memory will not have + Same as :c:func:`PyMem_Malloc`, but allocates ``(n * sizeof(TYPE))`` bytes of + memory. Returns a pointer cast to :c:type:`TYPE\*`. The memory will not have been initialized in any way. -.. cfunction:: TYPE* PyMem_Resize(void *p, TYPE, size_t n) +.. c:function:: TYPE* PyMem_Resize(void *p, TYPE, size_t n) - Same as :cfunc:`PyMem_Realloc`, but the memory block is resized to ``(n * - sizeof(TYPE))`` bytes. Returns a pointer cast to :ctype:`TYPE\*`. On return, + Same as :c:func:`PyMem_Realloc`, but the memory block is resized to ``(n * + sizeof(TYPE))`` bytes. Returns a pointer cast to :c:type:`TYPE\*`. On return, *p* will be a pointer to the new memory area, or *NULL* in the event of failure. This is a C preprocessor macro; p is always reassigned. Save the original value of p to avoid losing memory when handling errors. -.. cfunction:: void PyMem_Del(void *p) +.. c:function:: void PyMem_Del(void *p) - Same as :cfunc:`PyMem_Free`. + Same as :c:func:`PyMem_Free`. In addition, the following macro sets are provided for calling the Python memory allocator directly, without involving the C API functions listed above. However, note that their use does not preserve binary compatibility across Python versions and is therefore deprecated in extension modules. -:cfunc:`PyMem_MALLOC`, :cfunc:`PyMem_REALLOC`, :cfunc:`PyMem_FREE`. +:c:func:`PyMem_MALLOC`, :c:func:`PyMem_REALLOC`, :c:func:`PyMem_FREE`. -:cfunc:`PyMem_NEW`, :cfunc:`PyMem_RESIZE`, :cfunc:`PyMem_DEL`. +:c:func:`PyMem_NEW`, :c:func:`PyMem_RESIZE`, :c:func:`PyMem_DEL`. .. _memoryexamples: @@ -201,8 +201,8 @@ allocators operating on different heaps. :: free(buf1); /* Fatal -- should be PyMem_Del() */ In addition to the functions aimed at handling raw memory blocks from the Python -heap, objects in Python are allocated and released with :cfunc:`PyObject_New`, -:cfunc:`PyObject_NewVar` and :cfunc:`PyObject_Del`. +heap, objects in Python are allocated and released with :c:func:`PyObject_New`, +:c:func:`PyObject_NewVar` and :c:func:`PyObject_Del`. These will be explained in the next chapter on defining and implementing new object types in C. diff --git a/Doc/c-api/method.rst b/Doc/c-api/method.rst index add1f0f..71ddeda 100644 --- a/Doc/c-api/method.rst +++ b/Doc/c-api/method.rst @@ -10,21 +10,21 @@ Method Objects There are some useful functions that are useful for working with method objects. -.. cvar:: PyTypeObject PyMethod_Type +.. c:var:: PyTypeObject PyMethod_Type .. index:: single: MethodType (in module types) - This instance of :ctype:`PyTypeObject` represents the Python method type. This + This instance of :c:type:`PyTypeObject` represents the Python method type. This is exposed to Python programs as ``types.MethodType``. -.. cfunction:: int PyMethod_Check(PyObject *o) +.. c:function:: int PyMethod_Check(PyObject *o) - Return true if *o* is a method object (has type :cdata:`PyMethod_Type`). The + Return true if *o* is a method object (has type :c:data:`PyMethod_Type`). The parameter must not be *NULL*. -.. cfunction:: PyObject* PyMethod_New(PyObject *func, PyObject *self, PyObject *class) +.. c:function:: PyObject* PyMethod_New(PyObject *func, PyObject *self, PyObject *class) Return a new method object, with *func* being any callable object; this is the function that will be called when the method is called. If this method should @@ -33,39 +33,39 @@ There are some useful functions that are useful for working with method objects. class which provides the unbound method.. -.. cfunction:: PyObject* PyMethod_Class(PyObject *meth) +.. c:function:: PyObject* PyMethod_Class(PyObject *meth) Return the class object from which the method *meth* was created; if this was created from an instance, it will be the class of the instance. -.. cfunction:: PyObject* PyMethod_GET_CLASS(PyObject *meth) +.. c:function:: PyObject* PyMethod_GET_CLASS(PyObject *meth) - Macro version of :cfunc:`PyMethod_Class` which avoids error checking. + Macro version of :c:func:`PyMethod_Class` which avoids error checking. -.. cfunction:: PyObject* PyMethod_Function(PyObject *meth) +.. c:function:: PyObject* PyMethod_Function(PyObject *meth) Return the function object associated with the method *meth*. -.. cfunction:: PyObject* PyMethod_GET_FUNCTION(PyObject *meth) +.. c:function:: PyObject* PyMethod_GET_FUNCTION(PyObject *meth) - Macro version of :cfunc:`PyMethod_Function` which avoids error checking. + Macro version of :c:func:`PyMethod_Function` which avoids error checking. -.. cfunction:: PyObject* PyMethod_Self(PyObject *meth) +.. c:function:: PyObject* PyMethod_Self(PyObject *meth) Return the instance associated with the method *meth* if it is bound, otherwise return *NULL*. -.. cfunction:: PyObject* PyMethod_GET_SELF(PyObject *meth) +.. c:function:: PyObject* PyMethod_GET_SELF(PyObject *meth) - Macro version of :cfunc:`PyMethod_Self` which avoids error checking. + Macro version of :c:func:`PyMethod_Self` which avoids error checking. -.. cfunction:: int PyMethod_ClearFreeList() +.. c:function:: int PyMethod_ClearFreeList() Clear the free list. Return the total number of freed items. diff --git a/Doc/c-api/module.rst b/Doc/c-api/module.rst index 649c723..56e63cf 100644 --- a/Doc/c-api/module.rst +++ b/Doc/c-api/module.rst @@ -10,15 +10,15 @@ Module Objects There are only a few functions special to module objects. -.. cvar:: PyTypeObject PyModule_Type +.. c:var:: PyTypeObject PyModule_Type .. index:: single: ModuleType (in module types) - This instance of :ctype:`PyTypeObject` represents the Python module type. This + This instance of :c:type:`PyTypeObject` represents the Python module type. This is exposed to Python programs as ``types.ModuleType``. -.. cfunction:: int PyModule_Check(PyObject *p) +.. c:function:: int PyModule_Check(PyObject *p) Return true if *p* is a module object, or a subtype of a module object. @@ -26,15 +26,15 @@ There are only a few functions special to module objects. Allowed subtypes to be accepted. -.. cfunction:: int PyModule_CheckExact(PyObject *p) +.. c:function:: int PyModule_CheckExact(PyObject *p) Return true if *p* is a module object, but not a subtype of - :cdata:`PyModule_Type`. + :c:data:`PyModule_Type`. .. versionadded:: 2.2 -.. cfunction:: PyObject* PyModule_New(const char *name) +.. c:function:: PyObject* PyModule_New(const char *name) .. index:: single: __name__ (module attribute) @@ -46,18 +46,18 @@ There are only a few functions special to module objects. the caller is responsible for providing a :attr:`__file__` attribute. -.. cfunction:: PyObject* PyModule_GetDict(PyObject *module) +.. c:function:: PyObject* PyModule_GetDict(PyObject *module) .. index:: single: __dict__ (module attribute) Return the dictionary object that implements *module*'s namespace; this object is the same as the :attr:`__dict__` attribute of the module object. This function never fails. It is recommended extensions use other - :cfunc:`PyModule_\*` and :cfunc:`PyObject_\*` functions rather than directly + :c:func:`PyModule_\*` and :c:func:`PyObject_\*` functions rather than directly manipulate a module's :attr:`__dict__`. -.. cfunction:: char* PyModule_GetName(PyObject *module) +.. c:function:: char* PyModule_GetName(PyObject *module) .. index:: single: __name__ (module attribute) @@ -67,7 +67,7 @@ There are only a few functions special to module objects. or if it is not a string, :exc:`SystemError` is raised and *NULL* is returned. -.. cfunction:: char* PyModule_GetFilename(PyObject *module) +.. c:function:: char* PyModule_GetFilename(PyObject *module) .. index:: single: __file__ (module attribute) @@ -78,7 +78,7 @@ There are only a few functions special to module objects. raise :exc:`SystemError` and return *NULL*. -.. cfunction:: int PyModule_AddObject(PyObject *module, const char *name, PyObject *value) +.. c:function:: int PyModule_AddObject(PyObject *module, const char *name, PyObject *value) Add an object to *module* as *name*. This is a convenience function which can be used from the module's initialization function. This steals a reference to @@ -87,7 +87,7 @@ There are only a few functions special to module objects. .. versionadded:: 2.0 -.. cfunction:: int PyModule_AddIntConstant(PyObject *module, const char *name, long value) +.. c:function:: int PyModule_AddIntConstant(PyObject *module, const char *name, long value) Add an integer constant to *module* as *name*. This convenience function can be used from the module's initialization function. Return ``-1`` on error, ``0`` on @@ -96,7 +96,7 @@ There are only a few functions special to module objects. .. versionadded:: 2.0 -.. cfunction:: int PyModule_AddStringConstant(PyObject *module, const char *name, const char *value) +.. c:function:: int PyModule_AddStringConstant(PyObject *module, const char *name, const char *value) Add a string constant to *module* as *name*. This convenience function can be used from the module's initialization function. The string *value* must be @@ -104,7 +104,7 @@ There are only a few functions special to module objects. .. versionadded:: 2.0 -.. cfunction:: int PyModule_AddIntMacro(PyObject *module, macro) +.. c:function:: int PyModule_AddIntMacro(PyObject *module, macro) Add an int constant to *module*. The name and the value are taken from *macro*. For example ``PyModule_AddIntMacro(module, AF_INET)`` adds the int @@ -113,7 +113,7 @@ There are only a few functions special to module objects. .. versionadded:: 2.6 -.. cfunction:: int PyModule_AddStringMacro(PyObject *module, macro) +.. c:function:: int PyModule_AddStringMacro(PyObject *module, macro) Add a string constant to *module*. diff --git a/Doc/c-api/none.rst b/Doc/c-api/none.rst index 1bb603e..aeaca97 100644 --- a/Doc/c-api/none.rst +++ b/Doc/c-api/none.rst @@ -7,22 +7,22 @@ The None Object .. index:: object: None -Note that the :ctype:`PyTypeObject` for ``None`` is not directly exposed in the +Note that the :c:type:`PyTypeObject` for ``None`` is not directly exposed in the Python/C API. Since ``None`` is a singleton, testing for object identity (using -``==`` in C) is sufficient. There is no :cfunc:`PyNone_Check` function for the +``==`` in C) is sufficient. There is no :c:func:`PyNone_Check` function for the same reason. -.. cvar:: PyObject* Py_None +.. c:var:: PyObject* Py_None The Python ``None`` object, denoting lack of value. This object has no methods. It needs to be treated just like any other object with respect to reference counts. -.. cmacro:: Py_RETURN_NONE +.. c:macro:: Py_RETURN_NONE - Properly handle returning :cdata:`Py_None` from within a C function. + Properly handle returning :c:data:`Py_None` from within a C function. .. versionadded:: 2.4 diff --git a/Doc/c-api/number.rst b/Doc/c-api/number.rst index ffc2585..75b7341 100644 --- a/Doc/c-api/number.rst +++ b/Doc/c-api/number.rst @@ -6,37 +6,37 @@ Number Protocol =============== -.. cfunction:: int PyNumber_Check(PyObject *o) +.. c:function:: int PyNumber_Check(PyObject *o) Returns ``1`` if the object *o* provides numeric protocols, and false otherwise. This function always succeeds. -.. cfunction:: PyObject* PyNumber_Add(PyObject *o1, PyObject *o2) +.. c:function:: PyObject* PyNumber_Add(PyObject *o1, PyObject *o2) Returns the result of adding *o1* and *o2*, or *NULL* on failure. This is the equivalent of the Python expression ``o1 + o2``. -.. cfunction:: PyObject* PyNumber_Subtract(PyObject *o1, PyObject *o2) +.. c:function:: PyObject* PyNumber_Subtract(PyObject *o1, PyObject *o2) Returns the result of subtracting *o2* from *o1*, or *NULL* on failure. This is the equivalent of the Python expression ``o1 - o2``. -.. cfunction:: PyObject* PyNumber_Multiply(PyObject *o1, PyObject *o2) +.. c:function:: PyObject* PyNumber_Multiply(PyObject *o1, PyObject *o2) Returns the result of multiplying *o1* and *o2*, or *NULL* on failure. This is the equivalent of the Python expression ``o1 * o2``. -.. cfunction:: PyObject* PyNumber_Divide(PyObject *o1, PyObject *o2) +.. c:function:: PyObject* PyNumber_Divide(PyObject *o1, PyObject *o2) Returns the result of dividing *o1* by *o2*, or *NULL* on failure. This is the equivalent of the Python expression ``o1 / o2``. -.. cfunction:: PyObject* PyNumber_FloorDivide(PyObject *o1, PyObject *o2) +.. c:function:: PyObject* PyNumber_FloorDivide(PyObject *o1, PyObject *o2) Return the floor of *o1* divided by *o2*, or *NULL* on failure. This is equivalent to the "classic" division of integers. @@ -44,7 +44,7 @@ Number Protocol .. versionadded:: 2.2 -.. cfunction:: PyObject* PyNumber_TrueDivide(PyObject *o1, PyObject *o2) +.. c:function:: PyObject* PyNumber_TrueDivide(PyObject *o1, PyObject *o2) Return a reasonable approximation for the mathematical value of *o1* divided by *o2*, or *NULL* on failure. The return value is "approximate" because binary @@ -55,13 +55,13 @@ Number Protocol .. versionadded:: 2.2 -.. cfunction:: PyObject* PyNumber_Remainder(PyObject *o1, PyObject *o2) +.. c:function:: PyObject* PyNumber_Remainder(PyObject *o1, PyObject *o2) Returns the remainder of dividing *o1* by *o2*, or *NULL* on failure. This is the equivalent of the Python expression ``o1 % o2``. -.. cfunction:: PyObject* PyNumber_Divmod(PyObject *o1, PyObject *o2) +.. c:function:: PyObject* PyNumber_Divmod(PyObject *o1, PyObject *o2) .. index:: builtin: divmod @@ -69,29 +69,29 @@ Number Protocol the equivalent of the Python expression ``divmod(o1, o2)``. -.. cfunction:: PyObject* PyNumber_Power(PyObject *o1, PyObject *o2, PyObject *o3) +.. c:function:: PyObject* PyNumber_Power(PyObject *o1, PyObject *o2, PyObject *o3) .. index:: builtin: pow See the built-in function :func:`pow`. Returns *NULL* on failure. This is the equivalent of the Python expression ``pow(o1, o2, o3)``, where *o3* is optional. - If *o3* is to be ignored, pass :cdata:`Py_None` in its place (passing *NULL* for + If *o3* is to be ignored, pass :c:data:`Py_None` in its place (passing *NULL* for *o3* would cause an illegal memory access). -.. cfunction:: PyObject* PyNumber_Negative(PyObject *o) +.. c:function:: PyObject* PyNumber_Negative(PyObject *o) Returns the negation of *o* on success, or *NULL* on failure. This is the equivalent of the Python expression ``-o``. -.. cfunction:: PyObject* PyNumber_Positive(PyObject *o) +.. c:function:: PyObject* PyNumber_Positive(PyObject *o) Returns *o* on success, or *NULL* on failure. This is the equivalent of the Python expression ``+o``. -.. cfunction:: PyObject* PyNumber_Absolute(PyObject *o) +.. c:function:: PyObject* PyNumber_Absolute(PyObject *o) .. index:: builtin: abs @@ -99,71 +99,71 @@ Number Protocol of the Python expression ``abs(o)``. -.. cfunction:: PyObject* PyNumber_Invert(PyObject *o) +.. c:function:: PyObject* PyNumber_Invert(PyObject *o) Returns the bitwise negation of *o* on success, or *NULL* on failure. This is the equivalent of the Python expression ``~o``. -.. cfunction:: PyObject* PyNumber_Lshift(PyObject *o1, PyObject *o2) +.. c:function:: PyObject* PyNumber_Lshift(PyObject *o1, PyObject *o2) Returns the result of left shifting *o1* by *o2* on success, or *NULL* on failure. This is the equivalent of the Python expression ``o1 << o2``. -.. cfunction:: PyObject* PyNumber_Rshift(PyObject *o1, PyObject *o2) +.. c:function:: PyObject* PyNumber_Rshift(PyObject *o1, PyObject *o2) Returns the result of right shifting *o1* by *o2* on success, or *NULL* on failure. This is the equivalent of the Python expression ``o1 >> o2``. -.. cfunction:: PyObject* PyNumber_And(PyObject *o1, PyObject *o2) +.. c:function:: PyObject* PyNumber_And(PyObject *o1, PyObject *o2) Returns the "bitwise and" of *o1* and *o2* on success and *NULL* on failure. This is the equivalent of the Python expression ``o1 & o2``. -.. cfunction:: PyObject* PyNumber_Xor(PyObject *o1, PyObject *o2) +.. c:function:: PyObject* PyNumber_Xor(PyObject *o1, PyObject *o2) Returns the "bitwise exclusive or" of *o1* by *o2* on success, or *NULL* on failure. This is the equivalent of the Python expression ``o1 ^ o2``. -.. cfunction:: PyObject* PyNumber_Or(PyObject *o1, PyObject *o2) +.. c:function:: PyObject* PyNumber_Or(PyObject *o1, PyObject *o2) Returns the "bitwise or" of *o1* and *o2* on success, or *NULL* on failure. This is the equivalent of the Python expression ``o1 | o2``. -.. cfunction:: PyObject* PyNumber_InPlaceAdd(PyObject *o1, PyObject *o2) +.. c:function:: PyObject* PyNumber_InPlaceAdd(PyObject *o1, PyObject *o2) Returns the result of adding *o1* and *o2*, or *NULL* on failure. The operation is done *in-place* when *o1* supports it. This is the equivalent of the Python statement ``o1 += o2``. -.. cfunction:: PyObject* PyNumber_InPlaceSubtract(PyObject *o1, PyObject *o2) +.. c:function:: PyObject* PyNumber_InPlaceSubtract(PyObject *o1, PyObject *o2) Returns the result of subtracting *o2* from *o1*, or *NULL* on failure. The operation is done *in-place* when *o1* supports it. This is the equivalent of the Python statement ``o1 -= o2``. -.. cfunction:: PyObject* PyNumber_InPlaceMultiply(PyObject *o1, PyObject *o2) +.. c:function:: PyObject* PyNumber_InPlaceMultiply(PyObject *o1, PyObject *o2) Returns the result of multiplying *o1* and *o2*, or *NULL* on failure. The operation is done *in-place* when *o1* supports it. This is the equivalent of the Python statement ``o1 *= o2``. -.. cfunction:: PyObject* PyNumber_InPlaceDivide(PyObject *o1, PyObject *o2) +.. c:function:: PyObject* PyNumber_InPlaceDivide(PyObject *o1, PyObject *o2) Returns the result of dividing *o1* by *o2*, or *NULL* on failure. The operation is done *in-place* when *o1* supports it. This is the equivalent of the Python statement ``o1 /= o2``. -.. cfunction:: PyObject* PyNumber_InPlaceFloorDivide(PyObject *o1, PyObject *o2) +.. c:function:: PyObject* PyNumber_InPlaceFloorDivide(PyObject *o1, PyObject *o2) Returns the mathematical floor of dividing *o1* by *o2*, or *NULL* on failure. The operation is done *in-place* when *o1* supports it. This is the equivalent @@ -172,7 +172,7 @@ Number Protocol .. versionadded:: 2.2 -.. cfunction:: PyObject* PyNumber_InPlaceTrueDivide(PyObject *o1, PyObject *o2) +.. c:function:: PyObject* PyNumber_InPlaceTrueDivide(PyObject *o1, PyObject *o2) Return a reasonable approximation for the mathematical value of *o1* divided by *o2*, or *NULL* on failure. The return value is "approximate" because binary @@ -183,64 +183,64 @@ Number Protocol .. versionadded:: 2.2 -.. cfunction:: PyObject* PyNumber_InPlaceRemainder(PyObject *o1, PyObject *o2) +.. c:function:: PyObject* PyNumber_InPlaceRemainder(PyObject *o1, PyObject *o2) Returns the remainder of dividing *o1* by *o2*, or *NULL* on failure. The operation is done *in-place* when *o1* supports it. This is the equivalent of the Python statement ``o1 %= o2``. -.. cfunction:: PyObject* PyNumber_InPlacePower(PyObject *o1, PyObject *o2, PyObject *o3) +.. c:function:: PyObject* PyNumber_InPlacePower(PyObject *o1, PyObject *o2, PyObject *o3) .. index:: builtin: pow See the built-in function :func:`pow`. Returns *NULL* on failure. The operation is done *in-place* when *o1* supports it. This is the equivalent of the Python - statement ``o1 **= o2`` when o3 is :cdata:`Py_None`, or an in-place variant of - ``pow(o1, o2, o3)`` otherwise. If *o3* is to be ignored, pass :cdata:`Py_None` + statement ``o1 **= o2`` when o3 is :c:data:`Py_None`, or an in-place variant of + ``pow(o1, o2, o3)`` otherwise. If *o3* is to be ignored, pass :c:data:`Py_None` in its place (passing *NULL* for *o3* would cause an illegal memory access). -.. cfunction:: PyObject* PyNumber_InPlaceLshift(PyObject *o1, PyObject *o2) +.. c:function:: PyObject* PyNumber_InPlaceLshift(PyObject *o1, PyObject *o2) Returns the result of left shifting *o1* by *o2* on success, or *NULL* on failure. The operation is done *in-place* when *o1* supports it. This is the equivalent of the Python statement ``o1 <<= o2``. -.. cfunction:: PyObject* PyNumber_InPlaceRshift(PyObject *o1, PyObject *o2) +.. c:function:: PyObject* PyNumber_InPlaceRshift(PyObject *o1, PyObject *o2) Returns the result of right shifting *o1* by *o2* on success, or *NULL* on failure. The operation is done *in-place* when *o1* supports it. This is the equivalent of the Python statement ``o1 >>= o2``. -.. cfunction:: PyObject* PyNumber_InPlaceAnd(PyObject *o1, PyObject *o2) +.. c:function:: PyObject* PyNumber_InPlaceAnd(PyObject *o1, PyObject *o2) Returns the "bitwise and" of *o1* and *o2* on success and *NULL* on failure. The operation is done *in-place* when *o1* supports it. This is the equivalent of the Python statement ``o1 &= o2``. -.. cfunction:: PyObject* PyNumber_InPlaceXor(PyObject *o1, PyObject *o2) +.. c:function:: PyObject* PyNumber_InPlaceXor(PyObject *o1, PyObject *o2) Returns the "bitwise exclusive or" of *o1* by *o2* on success, or *NULL* on failure. The operation is done *in-place* when *o1* supports it. This is the equivalent of the Python statement ``o1 ^= o2``. -.. cfunction:: PyObject* PyNumber_InPlaceOr(PyObject *o1, PyObject *o2) +.. c:function:: PyObject* PyNumber_InPlaceOr(PyObject *o1, PyObject *o2) Returns the "bitwise or" of *o1* and *o2* on success, or *NULL* on failure. The operation is done *in-place* when *o1* supports it. This is the equivalent of the Python statement ``o1 |= o2``. -.. cfunction:: int PyNumber_Coerce(PyObject **p1, PyObject **p2) +.. c:function:: int PyNumber_Coerce(PyObject **p1, PyObject **p2) .. index:: builtin: coerce - This function takes the addresses of two variables of type :ctype:`PyObject\*`. + This function takes the addresses of two variables of type :c:type:`PyObject\*`. If the objects pointed to by ``*p1`` and ``*p2`` have the same type, increment their reference count and return ``0`` (success). If the objects can be converted to a common numeric type, replace ``*p1`` and ``*p2`` by their @@ -250,14 +250,14 @@ Number Protocol &o2)`` is equivalent to the Python statement ``o1, o2 = coerce(o1, o2)``. -.. cfunction:: int PyNumber_CoerceEx(PyObject **p1, PyObject **p2) +.. c:function:: int PyNumber_CoerceEx(PyObject **p1, PyObject **p2) - This function is similar to :cfunc:`PyNumber_Coerce`, except that it returns + This function is similar to :c:func:`PyNumber_Coerce`, except that it returns ``1`` when the conversion is not possible and when no error is raised. Reference counts are still not increased in this case. -.. cfunction:: PyObject* PyNumber_Int(PyObject *o) +.. c:function:: PyObject* PyNumber_Int(PyObject *o) .. index:: builtin: int @@ -266,7 +266,7 @@ Number Protocol instead. This is the equivalent of the Python expression ``int(o)``. -.. cfunction:: PyObject* PyNumber_Long(PyObject *o) +.. c:function:: PyObject* PyNumber_Long(PyObject *o) .. index:: builtin: long @@ -274,7 +274,7 @@ Number Protocol failure. This is the equivalent of the Python expression ``long(o)``. -.. cfunction:: PyObject* PyNumber_Float(PyObject *o) +.. c:function:: PyObject* PyNumber_Float(PyObject *o) .. index:: builtin: float @@ -282,7 +282,7 @@ Number Protocol This is the equivalent of the Python expression ``float(o)``. -.. cfunction:: PyObject* PyNumber_Index(PyObject *o) +.. c:function:: PyObject* PyNumber_Index(PyObject *o) Returns the *o* converted to a Python int or long on success or *NULL* with a :exc:`TypeError` exception raised on failure. @@ -290,18 +290,18 @@ Number Protocol .. versionadded:: 2.5 -.. cfunction:: PyObject* PyNumber_ToBase(PyObject *n, int base) +.. c:function:: PyObject* PyNumber_ToBase(PyObject *n, int base) Returns the integer *n* converted to *base* as a string with a base marker of ``'0b'``, ``'0o'``, or ``'0x'`` if applicable. When *base* is not 2, 8, 10, or 16, the format is ``'x#num'`` where x is the base. If *n* is not an int object, it is converted with - :cfunc:`PyNumber_Index` first. + :c:func:`PyNumber_Index` first. .. versionadded:: 2.6 -.. cfunction:: Py_ssize_t PyNumber_AsSsize_t(PyObject *o, PyObject *exc) +.. c:function:: Py_ssize_t PyNumber_AsSsize_t(PyObject *o, PyObject *exc) Returns *o* converted to a Py_ssize_t value if *o* can be interpreted as an integer. If *o* can be converted to a Python int or long but the attempt to @@ -314,7 +314,7 @@ Number Protocol .. versionadded:: 2.5 -.. cfunction:: int PyIndex_Check(PyObject *o) +.. c:function:: int PyIndex_Check(PyObject *o) Returns True if *o* is an index integer (has the nb_index slot of the tp_as_number structure filled in). diff --git a/Doc/c-api/objbuffer.rst b/Doc/c-api/objbuffer.rst index 93f5ff0..90dce62 100644 --- a/Doc/c-api/objbuffer.rst +++ b/Doc/c-api/objbuffer.rst @@ -13,7 +13,7 @@ shortcomings of the protocol, and has been backported to Python 2.6. See :ref:`bufferobjects` for more information. -.. cfunction:: int PyObject_AsCharBuffer(PyObject *obj, const char **buffer, Py_ssize_t *buffer_len) +.. c:function:: int PyObject_AsCharBuffer(PyObject *obj, const char **buffer, Py_ssize_t *buffer_len) Returns a pointer to a read-only memory location usable as character-based input. The *obj* argument must support the single-segment character buffer @@ -24,11 +24,11 @@ shortcomings of the protocol, and has been backported to Python 2.6. See .. versionadded:: 1.6 .. versionchanged:: 2.5 - This function used an :ctype:`int *` type for *buffer_len*. This might + This function used an :c:type:`int *` type for *buffer_len*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: int PyObject_AsReadBuffer(PyObject *obj, const void **buffer, Py_ssize_t *buffer_len) +.. c:function:: int PyObject_AsReadBuffer(PyObject *obj, const void **buffer, Py_ssize_t *buffer_len) Returns a pointer to a read-only memory location containing arbitrary data. The *obj* argument must support the single-segment readable buffer @@ -39,11 +39,11 @@ shortcomings of the protocol, and has been backported to Python 2.6. See .. versionadded:: 1.6 .. versionchanged:: 2.5 - This function used an :ctype:`int *` type for *buffer_len*. This might + This function used an :c:type:`int *` type for *buffer_len*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: int PyObject_CheckReadBuffer(PyObject *o) +.. c:function:: int PyObject_CheckReadBuffer(PyObject *o) Returns ``1`` if *o* supports the single-segment readable buffer interface. Otherwise returns ``0``. @@ -51,7 +51,7 @@ shortcomings of the protocol, and has been backported to Python 2.6. See .. versionadded:: 2.2 -.. cfunction:: int PyObject_AsWriteBuffer(PyObject *obj, void **buffer, Py_ssize_t *buffer_len) +.. c:function:: int PyObject_AsWriteBuffer(PyObject *obj, void **buffer, Py_ssize_t *buffer_len) Returns a pointer to a writeable memory location. The *obj* argument must support the single-segment, character buffer interface. On success, @@ -61,6 +61,6 @@ shortcomings of the protocol, and has been backported to Python 2.6. See .. versionadded:: 1.6 .. versionchanged:: 2.5 - This function used an :ctype:`int *` type for *buffer_len*. This might + This function used an :c:type:`int *` type for *buffer_len*. This might require changes in your code for properly supporting 64-bit systems. diff --git a/Doc/c-api/object.rst b/Doc/c-api/object.rst index 717fb08..a02326f 100644 --- a/Doc/c-api/object.rst +++ b/Doc/c-api/object.rst @@ -6,7 +6,7 @@ Object Protocol =============== -.. cfunction:: int PyObject_Print(PyObject *o, FILE *fp, int flags) +.. c:function:: int PyObject_Print(PyObject *o, FILE *fp, int flags) Print an object *o*, on file *fp*. Returns ``-1`` on error. The flags argument is used to enable certain printing options. The only option currently supported @@ -14,35 +14,35 @@ Object Protocol instead of the :func:`repr`. -.. cfunction:: int PyObject_HasAttr(PyObject *o, PyObject *attr_name) +.. c:function:: int PyObject_HasAttr(PyObject *o, PyObject *attr_name) Returns ``1`` if *o* has the attribute *attr_name*, and ``0`` otherwise. This is equivalent to the Python expression ``hasattr(o, attr_name)``. This function always succeeds. -.. cfunction:: int PyObject_HasAttrString(PyObject *o, const char *attr_name) +.. c:function:: int PyObject_HasAttrString(PyObject *o, const char *attr_name) Returns ``1`` if *o* has the attribute *attr_name*, and ``0`` otherwise. This is equivalent to the Python expression ``hasattr(o, attr_name)``. This function always succeeds. -.. cfunction:: PyObject* PyObject_GetAttr(PyObject *o, PyObject *attr_name) +.. c:function:: PyObject* PyObject_GetAttr(PyObject *o, PyObject *attr_name) Retrieve an attribute named *attr_name* from object *o*. Returns the attribute value on success, or *NULL* on failure. This is the equivalent of the Python expression ``o.attr_name``. -.. cfunction:: PyObject* PyObject_GetAttrString(PyObject *o, const char *attr_name) +.. c:function:: PyObject* PyObject_GetAttrString(PyObject *o, const char *attr_name) Retrieve an attribute named *attr_name* from object *o*. Returns the attribute value on success, or *NULL* on failure. This is the equivalent of the Python expression ``o.attr_name``. -.. cfunction:: PyObject* PyObject_GenericGetAttr(PyObject *o, PyObject *name) +.. c:function:: PyObject* PyObject_GenericGetAttr(PyObject *o, PyObject *name) Generic attribute getter function that is meant to be put into a type object's ``tp_getattro`` slot. It looks for a descriptor in the dictionary @@ -52,21 +52,21 @@ Object Protocol descriptors don't. Otherwise, an :exc:`AttributeError` is raised. -.. cfunction:: int PyObject_SetAttr(PyObject *o, PyObject *attr_name, PyObject *v) +.. c:function:: int PyObject_SetAttr(PyObject *o, PyObject *attr_name, PyObject *v) Set the value of the attribute named *attr_name*, for object *o*, to the value *v*. Returns ``-1`` on failure. This is the equivalent of the Python statement ``o.attr_name = v``. -.. cfunction:: int PyObject_SetAttrString(PyObject *o, const char *attr_name, PyObject *v) +.. c:function:: int PyObject_SetAttrString(PyObject *o, const char *attr_name, PyObject *v) Set the value of the attribute named *attr_name*, for object *o*, to the value *v*. Returns ``-1`` on failure. This is the equivalent of the Python statement ``o.attr_name = v``. -.. cfunction:: int PyObject_GenericSetAttr(PyObject *o, PyObject *name, PyObject *value) +.. c:function:: int PyObject_GenericSetAttr(PyObject *o, PyObject *name, PyObject *value) Generic attribute setter function that is meant to be put into a type object's ``tp_setattro`` slot. It looks for a data descriptor in the @@ -76,19 +76,19 @@ Object Protocol an :exc:`AttributeError` is raised and ``-1`` is returned. -.. cfunction:: int PyObject_DelAttr(PyObject *o, PyObject *attr_name) +.. c:function:: int PyObject_DelAttr(PyObject *o, PyObject *attr_name) Delete attribute named *attr_name*, for object *o*. Returns ``-1`` on failure. This is the equivalent of the Python statement ``del o.attr_name``. -.. cfunction:: int PyObject_DelAttrString(PyObject *o, const char *attr_name) +.. c:function:: int PyObject_DelAttrString(PyObject *o, const char *attr_name) Delete attribute named *attr_name*, for object *o*. Returns ``-1`` on failure. This is the equivalent of the Python statement ``del o.attr_name``. -.. cfunction:: PyObject* PyObject_RichCompare(PyObject *o1, PyObject *o2, int opid) +.. c:function:: PyObject* PyObject_RichCompare(PyObject *o1, PyObject *o2, int opid) Compare the values of *o1* and *o2* using the operation specified by *opid*, which must be one of :const:`Py_LT`, :const:`Py_LE`, :const:`Py_EQ`, @@ -98,7 +98,7 @@ Object Protocol to *opid*. Returns the value of the comparison on success, or *NULL* on failure. -.. cfunction:: int PyObject_RichCompareBool(PyObject *o1, PyObject *o2, int opid) +.. c:function:: int PyObject_RichCompareBool(PyObject *o1, PyObject *o2, int opid) Compare the values of *o1* and *o2* using the operation specified by *opid*, which must be one of :const:`Py_LT`, :const:`Py_LE`, :const:`Py_EQ`, @@ -109,10 +109,10 @@ Object Protocol *opid*. .. note:: - If *o1* and *o2* are the same object, :cfunc:`PyObject_RichCompareBool` + If *o1* and *o2* are the same object, :c:func:`PyObject_RichCompareBool` will always return ``1`` for :const:`Py_EQ` and ``0`` for :const:`Py_NE`. -.. cfunction:: int PyObject_Cmp(PyObject *o1, PyObject *o2, int *result) +.. c:function:: int PyObject_Cmp(PyObject *o1, PyObject *o2, int *result) .. index:: builtin: cmp @@ -122,18 +122,18 @@ Object Protocol the Python statement ``result = cmp(o1, o2)``. -.. cfunction:: int PyObject_Compare(PyObject *o1, PyObject *o2) +.. c:function:: int PyObject_Compare(PyObject *o1, PyObject *o2) .. index:: builtin: cmp Compare the values of *o1* and *o2* using a routine provided by *o1*, if one exists, otherwise with a routine provided by *o2*. Returns the result of the comparison on success. On error, the value returned is undefined; use - :cfunc:`PyErr_Occurred` to detect an error. This is equivalent to the Python + :c:func:`PyErr_Occurred` to detect an error. This is equivalent to the Python expression ``cmp(o1, o2)``. -.. cfunction:: PyObject* PyObject_Repr(PyObject *o) +.. c:function:: PyObject* PyObject_Repr(PyObject *o) .. index:: builtin: repr @@ -143,7 +143,7 @@ Object Protocol by reverse quotes. -.. cfunction:: PyObject* PyObject_Str(PyObject *o) +.. c:function:: PyObject* PyObject_Str(PyObject *o) .. index:: builtin: str @@ -153,15 +153,15 @@ Object Protocol by the :keyword:`print` statement. -.. cfunction:: PyObject* PyObject_Bytes(PyObject *o) +.. c:function:: PyObject* PyObject_Bytes(PyObject *o) .. index:: builtin: bytes Compute a bytes representation of object *o*. In 2.x, this is just a alias - for :cfunc:`PyObject_Str`. + for :c:func:`PyObject_Str`. -.. cfunction:: PyObject* PyObject_Unicode(PyObject *o) +.. c:function:: PyObject* PyObject_Unicode(PyObject *o) .. index:: builtin: unicode @@ -171,11 +171,11 @@ Object Protocol function. -.. cfunction:: int PyObject_IsInstance(PyObject *inst, PyObject *cls) +.. c:function:: int PyObject_IsInstance(PyObject *inst, PyObject *cls) Returns ``1`` if *inst* is an instance of the class *cls* or a subclass of *cls*, or ``0`` if not. On error, returns ``-1`` and sets an exception. If - *cls* is a type object rather than a class object, :cfunc:`PyObject_IsInstance` + *cls* is a type object rather than a class object, :c:func:`PyObject_IsInstance` returns ``1`` if *inst* is of type *cls*. If *cls* is a tuple, the check will be done against every entry in *cls*. The result will be ``1`` when at least one of the checks returns ``1``, otherwise it will be ``0``. If *inst* is not a @@ -195,13 +195,13 @@ of. If :class:`A` and :class:`B` are class objects, :class:`B` is a subclass of :class:`A` if it inherits from :class:`A` either directly or indirectly. If either is not a class object, a more general mechanism is used to determine the class relationship of the two objects. When testing if *B* is a subclass of -*A*, if *A* is *B*, :cfunc:`PyObject_IsSubclass` returns true. If *A* and *B* +*A*, if *A* is *B*, :c:func:`PyObject_IsSubclass` returns true. If *A* and *B* are different objects, *B*'s :attr:`__bases__` attribute is searched in a depth-first fashion for *A* --- the presence of the :attr:`__bases__` attribute is considered sufficient for this determination. -.. cfunction:: int PyObject_IsSubclass(PyObject *derived, PyObject *cls) +.. c:function:: int PyObject_IsSubclass(PyObject *derived, PyObject *cls) Returns ``1`` if the class *derived* is identical to or derived from the class *cls*, otherwise returns ``0``. In case of an error, returns ``-1``. If *cls* @@ -216,13 +216,13 @@ is considered sufficient for this determination. Older versions of Python did not support a tuple as the second argument. -.. cfunction:: int PyCallable_Check(PyObject *o) +.. c:function:: int PyCallable_Check(PyObject *o) Determine if the object *o* is callable. Return ``1`` if the object is callable and ``0`` otherwise. This function always succeeds. -.. cfunction:: PyObject* PyObject_Call(PyObject *callable_object, PyObject *args, PyObject *kw) +.. c:function:: PyObject* PyObject_Call(PyObject *callable_object, PyObject *args, PyObject *kw) .. index:: builtin: apply @@ -236,7 +236,7 @@ is considered sufficient for this determination. .. versionadded:: 2.2 -.. cfunction:: PyObject* PyObject_CallObject(PyObject *callable_object, PyObject *args) +.. c:function:: PyObject* PyObject_CallObject(PyObject *callable_object, PyObject *args) .. index:: builtin: apply @@ -247,52 +247,52 @@ is considered sufficient for this determination. ``callable_object(*args)``. -.. cfunction:: PyObject* PyObject_CallFunction(PyObject *callable, char *format, ...) +.. c:function:: PyObject* PyObject_CallFunction(PyObject *callable, char *format, ...) .. index:: builtin: apply Call a callable Python object *callable*, with a variable number of C arguments. - The C arguments are described using a :cfunc:`Py_BuildValue` style format + The C arguments are described using a :c:func:`Py_BuildValue` style format string. The format may be *NULL*, indicating that no arguments are provided. Returns the result of the call on success, or *NULL* on failure. This is the equivalent of the Python expression ``apply(callable, args)`` or - ``callable(*args)``. Note that if you only pass :ctype:`PyObject \*` args, - :cfunc:`PyObject_CallFunctionObjArgs` is a faster alternative. + ``callable(*args)``. Note that if you only pass :c:type:`PyObject \*` args, + :c:func:`PyObject_CallFunctionObjArgs` is a faster alternative. -.. cfunction:: PyObject* PyObject_CallMethod(PyObject *o, char *method, char *format, ...) +.. c:function:: PyObject* PyObject_CallMethod(PyObject *o, char *method, char *format, ...) Call the method named *method* of object *o* with a variable number of C - arguments. The C arguments are described by a :cfunc:`Py_BuildValue` format + arguments. The C arguments are described by a :c:func:`Py_BuildValue` format string that should produce a tuple. The format may be *NULL*, indicating that no arguments are provided. Returns the result of the call on success, or *NULL* on failure. This is the equivalent of the Python expression ``o.method(args)``. - Note that if you only pass :ctype:`PyObject \*` args, - :cfunc:`PyObject_CallMethodObjArgs` is a faster alternative. + Note that if you only pass :c:type:`PyObject \*` args, + :c:func:`PyObject_CallMethodObjArgs` is a faster alternative. -.. cfunction:: PyObject* PyObject_CallFunctionObjArgs(PyObject *callable, ..., NULL) +.. c:function:: PyObject* PyObject_CallFunctionObjArgs(PyObject *callable, ..., NULL) Call a callable Python object *callable*, with a variable number of - :ctype:`PyObject\*` arguments. The arguments are provided as a variable number + :c:type:`PyObject\*` arguments. The arguments are provided as a variable number of parameters followed by *NULL*. Returns the result of the call on success, or *NULL* on failure. .. versionadded:: 2.2 -.. cfunction:: PyObject* PyObject_CallMethodObjArgs(PyObject *o, PyObject *name, ..., NULL) +.. c:function:: PyObject* PyObject_CallMethodObjArgs(PyObject *o, PyObject *name, ..., NULL) Calls a method of the object *o*, where the name of the method is given as a Python string object in *name*. It is called with a variable number of - :ctype:`PyObject\*` arguments. The arguments are provided as a variable number + :c:type:`PyObject\*` arguments. The arguments are provided as a variable number of parameters followed by *NULL*. Returns the result of the call on success, or *NULL* on failure. .. versionadded:: 2.2 -.. cfunction:: long PyObject_Hash(PyObject *o) +.. c:function:: long PyObject_Hash(PyObject *o) .. index:: builtin: hash @@ -300,7 +300,7 @@ is considered sufficient for this determination. This is the equivalent of the Python expression ``hash(o)``. -.. cfunction:: long PyObject_HashNotImplemented(PyObject *o) +.. c:function:: long PyObject_HashNotImplemented(PyObject *o) Set a :exc:`TypeError` indicating that ``type(o)`` is not hashable and return ``-1``. This function receives special treatment when stored in a ``tp_hash`` slot, @@ -310,21 +310,21 @@ is considered sufficient for this determination. .. versionadded:: 2.6 -.. cfunction:: int PyObject_IsTrue(PyObject *o) +.. c:function:: int PyObject_IsTrue(PyObject *o) Returns ``1`` if the object *o* is considered to be true, and ``0`` otherwise. This is equivalent to the Python expression ``not not o``. On failure, return ``-1``. -.. cfunction:: int PyObject_Not(PyObject *o) +.. c:function:: int PyObject_Not(PyObject *o) Returns ``0`` if the object *o* is considered to be true, and ``1`` otherwise. This is equivalent to the Python expression ``not o``. On failure, return ``-1``. -.. cfunction:: PyObject* PyObject_Type(PyObject *o) +.. c:function:: PyObject* PyObject_Type(PyObject *o) .. index:: builtin: type @@ -333,11 +333,11 @@ is considered sufficient for this determination. is equivalent to the Python expression ``type(o)``. This function increments the reference count of the return value. There's really no reason to use this function instead of the common expression ``o->ob_type``, which returns a - pointer of type :ctype:`PyTypeObject\*`, except when the incremented reference + pointer of type :c:type:`PyTypeObject\*`, except when the incremented reference count is needed. -.. cfunction:: int PyObject_TypeCheck(PyObject *o, PyTypeObject *type) +.. c:function:: int PyObject_TypeCheck(PyObject *o, PyTypeObject *type) Return true if the object *o* is of type *type* or a subtype of *type*. Both parameters must be non-*NULL*. @@ -345,7 +345,7 @@ is considered sufficient for this determination. .. versionadded:: 2.2 -.. cfunction:: Py_ssize_t PyObject_Length(PyObject *o) +.. c:function:: Py_ssize_t PyObject_Length(PyObject *o) Py_ssize_t PyObject_Size(PyObject *o) .. index:: builtin: len @@ -355,29 +355,29 @@ is considered sufficient for this determination. returned. This is the equivalent to the Python expression ``len(o)``. .. versionchanged:: 2.5 - These functions returned an :ctype:`int` type. This might require + These functions returned an :c:type:`int` type. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: PyObject* PyObject_GetItem(PyObject *o, PyObject *key) +.. c:function:: PyObject* PyObject_GetItem(PyObject *o, PyObject *key) Return element of *o* corresponding to the object *key* or *NULL* on failure. This is the equivalent of the Python expression ``o[key]``. -.. cfunction:: int PyObject_SetItem(PyObject *o, PyObject *key, PyObject *v) +.. c:function:: int PyObject_SetItem(PyObject *o, PyObject *key, PyObject *v) Map the object *key* to the value *v*. Returns ``-1`` on failure. This is the equivalent of the Python statement ``o[key] = v``. -.. cfunction:: int PyObject_DelItem(PyObject *o, PyObject *key) +.. c:function:: int PyObject_DelItem(PyObject *o, PyObject *key) Delete the mapping for *key* from *o*. Returns ``-1`` on failure. This is the equivalent of the Python statement ``del o[key]``. -.. cfunction:: int PyObject_AsFileDescriptor(PyObject *o) +.. c:function:: int PyObject_AsFileDescriptor(PyObject *o) Derives a file descriptor from a Python object. If the object is an integer or long integer, its value is returned. If not, the object's :meth:`fileno` method @@ -385,16 +385,16 @@ is considered sufficient for this determination. is returned as the file descriptor value. Returns ``-1`` on failure. -.. cfunction:: PyObject* PyObject_Dir(PyObject *o) +.. c:function:: PyObject* PyObject_Dir(PyObject *o) This is equivalent to the Python expression ``dir(o)``, returning a (possibly empty) list of strings appropriate for the object argument, or *NULL* if there was an error. If the argument is *NULL*, this is like the Python ``dir()``, returning the names of the current locals; in this case, if no execution frame - is active then *NULL* is returned but :cfunc:`PyErr_Occurred` will return false. + is active then *NULL* is returned but :c:func:`PyErr_Occurred` will return false. -.. cfunction:: PyObject* PyObject_GetIter(PyObject *o) +.. c:function:: PyObject* PyObject_GetIter(PyObject *o) This is equivalent to the Python expression ``iter(o)``. It returns a new iterator for the object argument, or the object itself if the object is already diff --git a/Doc/c-api/refcounting.rst b/Doc/c-api/refcounting.rst index d3fd47f..49675a8 100644 --- a/Doc/c-api/refcounting.rst +++ b/Doc/c-api/refcounting.rst @@ -11,22 +11,22 @@ The macros in this section are used for managing reference counts of Python objects. -.. cfunction:: void Py_INCREF(PyObject *o) +.. c:function:: void Py_INCREF(PyObject *o) Increment the reference count for object *o*. The object must not be *NULL*; if - you aren't sure that it isn't *NULL*, use :cfunc:`Py_XINCREF`. + you aren't sure that it isn't *NULL*, use :c:func:`Py_XINCREF`. -.. cfunction:: void Py_XINCREF(PyObject *o) +.. c:function:: void Py_XINCREF(PyObject *o) Increment the reference count for object *o*. The object may be *NULL*, in which case the macro has no effect. -.. cfunction:: void Py_DECREF(PyObject *o) +.. c:function:: void Py_DECREF(PyObject *o) Decrement the reference count for object *o*. The object must not be *NULL*; if - you aren't sure that it isn't *NULL*, use :cfunc:`Py_XDECREF`. If the reference + you aren't sure that it isn't *NULL*, use :c:func:`Py_XDECREF`. If the reference count reaches zero, the object's type's deallocation function (which must not be *NULL*) is invoked. @@ -36,25 +36,25 @@ objects. when a class instance with a :meth:`__del__` method is deallocated). While exceptions in such code are not propagated, the executed code has free access to all Python global variables. This means that any object that is reachable from - a global variable should be in a consistent state before :cfunc:`Py_DECREF` is + a global variable should be in a consistent state before :c:func:`Py_DECREF` is invoked. For example, code to delete an object from a list should copy a reference to the deleted object in a temporary variable, update the list data - structure, and then call :cfunc:`Py_DECREF` for the temporary variable. + structure, and then call :c:func:`Py_DECREF` for the temporary variable. -.. cfunction:: void Py_XDECREF(PyObject *o) +.. c:function:: void Py_XDECREF(PyObject *o) Decrement the reference count for object *o*. The object may be *NULL*, in which case the macro has no effect; otherwise the effect is the same as for - :cfunc:`Py_DECREF`, and the same warning applies. + :c:func:`Py_DECREF`, and the same warning applies. -.. cfunction:: void Py_CLEAR(PyObject *o) +.. c:function:: void Py_CLEAR(PyObject *o) Decrement the reference count for object *o*. The object may be *NULL*, in which case the macro has no effect; otherwise the effect is the same as for - :cfunc:`Py_DECREF`, except that the argument is also set to *NULL*. The warning - for :cfunc:`Py_DECREF` does not apply with respect to the object passed because + :c:func:`Py_DECREF`, except that the argument is also set to *NULL*. The warning + for :c:func:`Py_DECREF` does not apply with respect to the object passed because the macro carefully uses a temporary variable and sets the argument to *NULL* before decrementing its reference count. @@ -65,10 +65,10 @@ objects. The following functions are for runtime dynamic embedding of Python: ``Py_IncRef(PyObject *o)``, ``Py_DecRef(PyObject *o)``. They are -simply exported function versions of :cfunc:`Py_XINCREF` and -:cfunc:`Py_XDECREF`, respectively. +simply exported function versions of :c:func:`Py_XINCREF` and +:c:func:`Py_XDECREF`, respectively. The following functions or macros are only for use within the interpreter core: -:cfunc:`_Py_Dealloc`, :cfunc:`_Py_ForgetReference`, :cfunc:`_Py_NewReference`, -as well as the global variable :cdata:`_Py_RefTotal`. +:c:func:`_Py_Dealloc`, :c:func:`_Py_ForgetReference`, :c:func:`_Py_NewReference`, +as well as the global variable :c:data:`_Py_RefTotal`. diff --git a/Doc/c-api/reflection.rst b/Doc/c-api/reflection.rst index 3996c1f..59edbb3 100644 --- a/Doc/c-api/reflection.rst +++ b/Doc/c-api/reflection.rst @@ -5,51 +5,51 @@ Reflection ========== -.. cfunction:: PyObject* PyEval_GetBuiltins() +.. c:function:: PyObject* PyEval_GetBuiltins() Return a dictionary of the builtins in the current execution frame, or the interpreter of the thread state if no frame is currently executing. -.. cfunction:: PyObject* PyEval_GetLocals() +.. c:function:: PyObject* PyEval_GetLocals() Return a dictionary of the local variables in the current execution frame, or *NULL* if no frame is currently executing. -.. cfunction:: PyObject* PyEval_GetGlobals() +.. c:function:: PyObject* PyEval_GetGlobals() Return a dictionary of the global variables in the current execution frame, or *NULL* if no frame is currently executing. -.. cfunction:: PyFrameObject* PyEval_GetFrame() +.. c:function:: PyFrameObject* PyEval_GetFrame() Return the current thread state's frame, which is *NULL* if no frame is currently executing. -.. cfunction:: int PyFrame_GetLineNumber(PyFrameObject *frame) +.. c:function:: int PyFrame_GetLineNumber(PyFrameObject *frame) Return the line number that *frame* is currently executing. -.. cfunction:: int PyEval_GetRestricted() +.. c:function:: int PyEval_GetRestricted() If there is a current frame and it is executing in restricted mode, return true, otherwise false. -.. cfunction:: const char* PyEval_GetFuncName(PyObject *func) +.. c:function:: const char* PyEval_GetFuncName(PyObject *func) Return the name of *func* if it is a function, class or instance object, else the name of *func*\s type. -.. cfunction:: const char* PyEval_GetFuncDesc(PyObject *func) +.. c:function:: const char* PyEval_GetFuncDesc(PyObject *func) Return a description string, depending on the type of *func*. Return values include "()" for functions and methods, " constructor", " instance", and " object". Concatenated with the result of - :cfunc:`PyEval_GetFuncName`, the result will be a description of + :c:func:`PyEval_GetFuncName`, the result will be a description of *func*. diff --git a/Doc/c-api/sequence.rst b/Doc/c-api/sequence.rst index 25feac0..2b668a5 100644 --- a/Doc/c-api/sequence.rst +++ b/Doc/c-api/sequence.rst @@ -6,13 +6,13 @@ Sequence Protocol ================= -.. cfunction:: int PySequence_Check(PyObject *o) +.. c:function:: int PySequence_Check(PyObject *o) Return ``1`` if the object provides sequence protocol, and ``0`` otherwise. This function always succeeds. -.. cfunction:: Py_ssize_t PySequence_Size(PyObject *o) +.. c:function:: Py_ssize_t PySequence_Size(PyObject *o) Py_ssize_t PySequence_Length(PyObject *o) .. index:: builtin: len @@ -22,140 +22,140 @@ Sequence Protocol Python expression ``len(o)``. .. versionchanged:: 2.5 - These functions returned an :ctype:`int` type. This might require + These functions returned an :c:type:`int` type. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: PyObject* PySequence_Concat(PyObject *o1, PyObject *o2) +.. c:function:: PyObject* PySequence_Concat(PyObject *o1, PyObject *o2) Return the concatenation of *o1* and *o2* on success, and *NULL* on failure. This is the equivalent of the Python expression ``o1 + o2``. -.. cfunction:: PyObject* PySequence_Repeat(PyObject *o, Py_ssize_t count) +.. c:function:: PyObject* PySequence_Repeat(PyObject *o, Py_ssize_t count) Return the result of repeating sequence object *o* *count* times, or *NULL* on failure. This is the equivalent of the Python expression ``o * count``. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *count*. This might require + This function used an :c:type:`int` type for *count*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: PyObject* PySequence_InPlaceConcat(PyObject *o1, PyObject *o2) +.. c:function:: PyObject* PySequence_InPlaceConcat(PyObject *o1, PyObject *o2) Return the concatenation of *o1* and *o2* on success, and *NULL* on failure. The operation is done *in-place* when *o1* supports it. This is the equivalent of the Python expression ``o1 += o2``. -.. cfunction:: PyObject* PySequence_InPlaceRepeat(PyObject *o, Py_ssize_t count) +.. c:function:: PyObject* PySequence_InPlaceRepeat(PyObject *o, Py_ssize_t count) Return the result of repeating sequence object *o* *count* times, or *NULL* on failure. The operation is done *in-place* when *o* supports it. This is the equivalent of the Python expression ``o *= count``. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *count*. This might require + This function used an :c:type:`int` type for *count*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: PyObject* PySequence_GetItem(PyObject *o, Py_ssize_t i) +.. c:function:: PyObject* PySequence_GetItem(PyObject *o, Py_ssize_t i) Return the *i*\ th element of *o*, or *NULL* on failure. This is the equivalent of the Python expression ``o[i]``. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *i*. This might require + This function used an :c:type:`int` type for *i*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: PyObject* PySequence_GetSlice(PyObject *o, Py_ssize_t i1, Py_ssize_t i2) +.. c:function:: PyObject* PySequence_GetSlice(PyObject *o, Py_ssize_t i1, Py_ssize_t i2) Return the slice of sequence object *o* between *i1* and *i2*, or *NULL* on failure. This is the equivalent of the Python expression ``o[i1:i2]``. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *i1* and *i2*. This might + This function used an :c:type:`int` type for *i1* and *i2*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: int PySequence_SetItem(PyObject *o, Py_ssize_t i, PyObject *v) +.. c:function:: int PySequence_SetItem(PyObject *o, Py_ssize_t i, PyObject *v) Assign object *v* to the *i*\ th element of *o*. Returns ``-1`` on failure. This is the equivalent of the Python statement ``o[i] = v``. This function *does not* steal a reference to *v*. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *i*. This might require + This function used an :c:type:`int` type for *i*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: int PySequence_DelItem(PyObject *o, Py_ssize_t i) +.. c:function:: int PySequence_DelItem(PyObject *o, Py_ssize_t i) Delete the *i*\ th element of object *o*. Returns ``-1`` on failure. This is the equivalent of the Python statement ``del o[i]``. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *i*. This might require + This function used an :c:type:`int` type for *i*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: int PySequence_SetSlice(PyObject *o, Py_ssize_t i1, Py_ssize_t i2, PyObject *v) +.. c:function:: int PySequence_SetSlice(PyObject *o, Py_ssize_t i1, Py_ssize_t i2, PyObject *v) Assign the sequence object *v* to the slice in sequence object *o* from *i1* to *i2*. This is the equivalent of the Python statement ``o[i1:i2] = v``. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *i1* and *i2*. This might + This function used an :c:type:`int` type for *i1* and *i2*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: int PySequence_DelSlice(PyObject *o, Py_ssize_t i1, Py_ssize_t i2) +.. c:function:: int PySequence_DelSlice(PyObject *o, Py_ssize_t i1, Py_ssize_t i2) Delete the slice in sequence object *o* from *i1* to *i2*. Returns ``-1`` on failure. This is the equivalent of the Python statement ``del o[i1:i2]``. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *i1* and *i2*. This might + This function used an :c:type:`int` type for *i1* and *i2*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: Py_ssize_t PySequence_Count(PyObject *o, PyObject *value) +.. c:function:: Py_ssize_t PySequence_Count(PyObject *o, PyObject *value) Return the number of occurrences of *value* in *o*, that is, return the number of keys for which ``o[key] == value``. On failure, return ``-1``. This is equivalent to the Python expression ``o.count(value)``. .. versionchanged:: 2.5 - This function returned an :ctype:`int` type. This might require changes + This function returned an :c:type:`int` type. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: int PySequence_Contains(PyObject *o, PyObject *value) +.. c:function:: int PySequence_Contains(PyObject *o, PyObject *value) Determine if *o* contains *value*. If an item in *o* is equal to *value*, return ``1``, otherwise return ``0``. On error, return ``-1``. This is equivalent to the Python expression ``value in o``. -.. cfunction:: Py_ssize_t PySequence_Index(PyObject *o, PyObject *value) +.. c:function:: Py_ssize_t PySequence_Index(PyObject *o, PyObject *value) Return the first index *i* for which ``o[i] == value``. On error, return ``-1``. This is equivalent to the Python expression ``o.index(value)``. .. versionchanged:: 2.5 - This function returned an :ctype:`int` type. This might require changes + This function returned an :c:type:`int` type. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: PyObject* PySequence_List(PyObject *o) +.. c:function:: PyObject* PySequence_List(PyObject *o) Return a list object with the same contents as the arbitrary sequence *o*. The returned list is guaranteed to be new. -.. cfunction:: PyObject* PySequence_Tuple(PyObject *o) +.. c:function:: PyObject* PySequence_Tuple(PyObject *o) .. index:: builtin: tuple @@ -165,28 +165,28 @@ Sequence Protocol equivalent to the Python expression ``tuple(o)``. -.. cfunction:: PyObject* PySequence_Fast(PyObject *o, const char *m) +.. c:function:: PyObject* PySequence_Fast(PyObject *o, const char *m) Returns the sequence *o* as a tuple, unless it is already a tuple or list, in - which case *o* is returned. Use :cfunc:`PySequence_Fast_GET_ITEM` to access the + which case *o* is returned. Use :c:func:`PySequence_Fast_GET_ITEM` to access the members of the result. Returns *NULL* on failure. If the object is not a sequence, raises :exc:`TypeError` with *m* as the message text. -.. cfunction:: PyObject* PySequence_Fast_GET_ITEM(PyObject *o, Py_ssize_t i) +.. c:function:: PyObject* PySequence_Fast_GET_ITEM(PyObject *o, Py_ssize_t i) Return the *i*\ th element of *o*, assuming that *o* was returned by - :cfunc:`PySequence_Fast`, *o* is not *NULL*, and that *i* is within bounds. + :c:func:`PySequence_Fast`, *o* is not *NULL*, and that *i* is within bounds. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *i*. This might require + This function used an :c:type:`int` type for *i*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: PyObject** PySequence_Fast_ITEMS(PyObject *o) +.. c:function:: PyObject** PySequence_Fast_ITEMS(PyObject *o) Return the underlying array of PyObject pointers. Assumes that *o* was returned - by :cfunc:`PySequence_Fast` and *o* is not *NULL*. + by :c:func:`PySequence_Fast` and *o* is not *NULL*. Note, if a list gets resized, the reallocation may relocate the items array. So, only use the underlying array pointer in contexts where the sequence @@ -195,24 +195,24 @@ Sequence Protocol .. versionadded:: 2.4 -.. cfunction:: PyObject* PySequence_ITEM(PyObject *o, Py_ssize_t i) +.. c:function:: PyObject* PySequence_ITEM(PyObject *o, Py_ssize_t i) Return the *i*\ th element of *o* or *NULL* on failure. Macro form of - :cfunc:`PySequence_GetItem` but without checking that - :cfunc:`PySequence_Check` on *o* is true and without adjustment for negative + :c:func:`PySequence_GetItem` but without checking that + :c:func:`PySequence_Check` on *o* is true and without adjustment for negative indices. .. versionadded:: 2.3 .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *i*. This might require + This function used an :c:type:`int` type for *i*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: Py_ssize_t PySequence_Fast_GET_SIZE(PyObject *o) +.. c:function:: Py_ssize_t PySequence_Fast_GET_SIZE(PyObject *o) Returns the length of *o*, assuming that *o* was returned by - :cfunc:`PySequence_Fast` and that *o* is not *NULL*. The size can also be - gotten by calling :cfunc:`PySequence_Size` on *o*, but - :cfunc:`PySequence_Fast_GET_SIZE` is faster because it can assume *o* is a list + :c:func:`PySequence_Fast` and that *o* is not *NULL*. The size can also be + gotten by calling :c:func:`PySequence_Size` on *o*, but + :c:func:`PySequence_Fast_GET_SIZE` is faster because it can assume *o* is a list or tuple. diff --git a/Doc/c-api/set.rst b/Doc/c-api/set.rst index 4bac96b..41c4af4 100644 --- a/Doc/c-api/set.rst +++ b/Doc/c-api/set.rst @@ -16,20 +16,20 @@ Set Objects This section details the public API for :class:`set` and :class:`frozenset` objects. Any functionality not listed below is best accessed using the either -the abstract object protocol (including :cfunc:`PyObject_CallMethod`, -:cfunc:`PyObject_RichCompareBool`, :cfunc:`PyObject_Hash`, -:cfunc:`PyObject_Repr`, :cfunc:`PyObject_IsTrue`, :cfunc:`PyObject_Print`, and -:cfunc:`PyObject_GetIter`) or the abstract number protocol (including -:cfunc:`PyNumber_And`, :cfunc:`PyNumber_Subtract`, :cfunc:`PyNumber_Or`, -:cfunc:`PyNumber_Xor`, :cfunc:`PyNumber_InPlaceAnd`, -:cfunc:`PyNumber_InPlaceSubtract`, :cfunc:`PyNumber_InPlaceOr`, and -:cfunc:`PyNumber_InPlaceXor`). +the abstract object protocol (including :c:func:`PyObject_CallMethod`, +:c:func:`PyObject_RichCompareBool`, :c:func:`PyObject_Hash`, +:c:func:`PyObject_Repr`, :c:func:`PyObject_IsTrue`, :c:func:`PyObject_Print`, and +:c:func:`PyObject_GetIter`) or the abstract number protocol (including +:c:func:`PyNumber_And`, :c:func:`PyNumber_Subtract`, :c:func:`PyNumber_Or`, +:c:func:`PyNumber_Xor`, :c:func:`PyNumber_InPlaceAnd`, +:c:func:`PyNumber_InPlaceSubtract`, :c:func:`PyNumber_InPlaceOr`, and +:c:func:`PyNumber_InPlaceXor`). -.. ctype:: PySetObject +.. c:type:: PySetObject - This subtype of :ctype:`PyObject` is used to hold the internal data for both - :class:`set` and :class:`frozenset` objects. It is like a :ctype:`PyDictObject` + This subtype of :c:type:`PyObject` is used to hold the internal data for both + :class:`set` and :class:`frozenset` objects. It is like a :c:type:`PyDictObject` in that it is a fixed size for small sets (much like tuple storage) and will point to a separate, variable sized block of memory for medium and large sized sets (much like list storage). None of the fields of this structure should be @@ -37,53 +37,53 @@ the abstract object protocol (including :cfunc:`PyObject_CallMethod`, the documented API rather than by manipulating the values in the structure. -.. cvar:: PyTypeObject PySet_Type +.. c:var:: PyTypeObject PySet_Type - This is an instance of :ctype:`PyTypeObject` representing the Python + This is an instance of :c:type:`PyTypeObject` representing the Python :class:`set` type. -.. cvar:: PyTypeObject PyFrozenSet_Type +.. c:var:: PyTypeObject PyFrozenSet_Type - This is an instance of :ctype:`PyTypeObject` representing the Python + This is an instance of :c:type:`PyTypeObject` representing the Python :class:`frozenset` type. The following type check macros work on pointers to any Python object. Likewise, the constructor functions work with any iterable Python object. -.. cfunction:: int PySet_Check(PyObject *p) +.. c:function:: int PySet_Check(PyObject *p) Return true if *p* is a :class:`set` object or an instance of a subtype. .. versionadded:: 2.6 -.. cfunction:: int PyFrozenSet_Check(PyObject *p) +.. c:function:: int PyFrozenSet_Check(PyObject *p) Return true if *p* is a :class:`frozenset` object or an instance of a subtype. .. versionadded:: 2.6 -.. cfunction:: int PyAnySet_Check(PyObject *p) +.. c:function:: int PyAnySet_Check(PyObject *p) Return true if *p* is a :class:`set` object, a :class:`frozenset` object, or an instance of a subtype. -.. cfunction:: int PyAnySet_CheckExact(PyObject *p) +.. c:function:: int PyAnySet_CheckExact(PyObject *p) Return true if *p* is a :class:`set` object or a :class:`frozenset` object but not an instance of a subtype. -.. cfunction:: int PyFrozenSet_CheckExact(PyObject *p) +.. c:function:: int PyFrozenSet_CheckExact(PyObject *p) Return true if *p* is a :class:`frozenset` object but not an instance of a subtype. -.. cfunction:: PyObject* PySet_New(PyObject *iterable) +.. c:function:: PyObject* PySet_New(PyObject *iterable) Return a new :class:`set` containing objects returned by the *iterable*. The *iterable* may be *NULL* to create a new empty set. Return the new set on @@ -92,7 +92,7 @@ the constructor functions work with any iterable Python object. (``c=set(s)``). -.. cfunction:: PyObject* PyFrozenSet_New(PyObject *iterable) +.. c:function:: PyObject* PyFrozenSet_New(PyObject *iterable) Return a new :class:`frozenset` containing objects returned by the *iterable*. The *iterable* may be *NULL* to create a new empty frozenset. Return the new @@ -108,7 +108,7 @@ The following functions and macros are available for instances of :class:`set` or :class:`frozenset` or instances of their subtypes. -.. cfunction:: Py_ssize_t PySet_Size(PyObject *anyset) +.. c:function:: Py_ssize_t PySet_Size(PyObject *anyset) .. index:: builtin: len @@ -117,16 +117,16 @@ or :class:`frozenset` or instances of their subtypes. :class:`set`, :class:`frozenset`, or an instance of a subtype. .. versionchanged:: 2.5 - This function returned an :ctype:`int`. This might require changes in + This function returned an :c:type:`int`. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: Py_ssize_t PySet_GET_SIZE(PyObject *anyset) +.. c:function:: Py_ssize_t PySet_GET_SIZE(PyObject *anyset) - Macro form of :cfunc:`PySet_Size` without error checking. + Macro form of :c:func:`PySet_Size` without error checking. -.. cfunction:: int PySet_Contains(PyObject *anyset, PyObject *key) +.. c:function:: int PySet_Contains(PyObject *anyset, PyObject *key) Return 1 if found, 0 if not found, and -1 if an error is encountered. Unlike the Python :meth:`__contains__` method, this function does not automatically @@ -135,7 +135,7 @@ or :class:`frozenset` or instances of their subtypes. :class:`set`, :class:`frozenset`, or an instance of a subtype. -.. cfunction:: int PySet_Add(PyObject *set, PyObject *key) +.. c:function:: int PySet_Add(PyObject *set, PyObject *key) Add *key* to a :class:`set` instance. Does not apply to :class:`frozenset` instances. Return 0 on success or -1 on failure. Raise a :exc:`TypeError` if @@ -145,14 +145,14 @@ or :class:`frozenset` or instances of their subtypes. .. versionchanged:: 2.6 Now works with instances of :class:`frozenset` or its subtypes. - Like :cfunc:`PyTuple_SetItem` in that it can be used to fill-in the + Like :c:func:`PyTuple_SetItem` in that it can be used to fill-in the values of brand new frozensets before they are exposed to other code. The following functions are available for instances of :class:`set` or its subtypes but not for instances of :class:`frozenset` or its subtypes. -.. cfunction:: int PySet_Discard(PyObject *set, PyObject *key) +.. c:function:: int PySet_Discard(PyObject *set, PyObject *key) Return 1 if found and removed, 0 if not found (no action taken), and -1 if an error is encountered. Does not raise :exc:`KeyError` for missing keys. Raise a @@ -162,7 +162,7 @@ subtypes but not for instances of :class:`frozenset` or its subtypes. instance of :class:`set` or its subtype. -.. cfunction:: PyObject* PySet_Pop(PyObject *set) +.. c:function:: PyObject* PySet_Pop(PyObject *set) Return a new reference to an arbitrary object in the *set*, and removes the object from the *set*. Return *NULL* on failure. Raise :exc:`KeyError` if the @@ -170,6 +170,6 @@ subtypes but not for instances of :class:`frozenset` or its subtypes. :class:`set` or its subtype. -.. cfunction:: int PySet_Clear(PyObject *set) +.. c:function:: int PySet_Clear(PyObject *set) Empty an existing set of all elements. diff --git a/Doc/c-api/slice.rst b/Doc/c-api/slice.rst index 14c1d49..f74230a 100644 --- a/Doc/c-api/slice.rst +++ b/Doc/c-api/slice.rst @@ -6,7 +6,7 @@ Slice Objects ------------- -.. cvar:: PyTypeObject PySlice_Type +.. c:var:: PyTypeObject PySlice_Type .. index:: single: SliceType (in module types) @@ -14,12 +14,12 @@ Slice Objects ``types.SliceType``. -.. cfunction:: int PySlice_Check(PyObject *ob) +.. c:function:: int PySlice_Check(PyObject *ob) Return true if *ob* is a slice object; *ob* must not be *NULL*. -.. cfunction:: PyObject* PySlice_New(PyObject *start, PyObject *stop, PyObject *step) +.. c:function:: PyObject* PySlice_New(PyObject *start, PyObject *stop, PyObject *step) Return a new slice object with the given values. The *start*, *stop*, and *step* parameters are used as the values of the slice object attributes of @@ -28,7 +28,7 @@ Slice Objects the new object could not be allocated. -.. cfunction:: int PySlice_GetIndices(PySliceObject *slice, Py_ssize_t length, Py_ssize_t *start, Py_ssize_t *stop, Py_ssize_t *step) +.. c:function:: int PySlice_GetIndices(PySliceObject *slice, Py_ssize_t length, Py_ssize_t *start, Py_ssize_t *stop, Py_ssize_t *step) Retrieve the start, stop and step indices from the slice object *slice*, assuming a sequence of length *length*. Treats indices greater than @@ -40,18 +40,18 @@ Slice Objects You probably do not want to use this function. If you want to use slice objects in versions of Python prior to 2.3, you would probably do well to - incorporate the source of :cfunc:`PySlice_GetIndicesEx`, suitably renamed, + incorporate the source of :c:func:`PySlice_GetIndicesEx`, suitably renamed, in the source of your extension. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *length* and an - :ctype:`int *` type for *start*, *stop*, and *step*. This might require + This function used an :c:type:`int` type for *length* and an + :c:type:`int *` type for *start*, *stop*, and *step*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: int PySlice_GetIndicesEx(PySliceObject *slice, Py_ssize_t length, Py_ssize_t *start, Py_ssize_t *stop, Py_ssize_t *step, Py_ssize_t *slicelength) +.. c:function:: int PySlice_GetIndicesEx(PySliceObject *slice, Py_ssize_t length, Py_ssize_t *start, Py_ssize_t *stop, Py_ssize_t *step, Py_ssize_t *slicelength) - Usable replacement for :cfunc:`PySlice_GetIndices`. Retrieve the start, + Usable replacement for :c:func:`PySlice_GetIndices`. Retrieve the start, stop, and step indices from the slice object *slice* assuming a sequence of length *length*, and store the length of the slice in *slicelength*. Out of bounds indices are clipped in a manner consistent with the handling of @@ -62,7 +62,7 @@ Slice Objects .. versionadded:: 2.3 .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *length* and an - :ctype:`int *` type for *start*, *stop*, *step*, and *slicelength*. This + This function used an :c:type:`int` type for *length* and an + :c:type:`int *` type for *start*, *stop*, *step*, and *slicelength*. This might require changes in your code for properly supporting 64-bit systems. diff --git a/Doc/c-api/string.rst b/Doc/c-api/string.rst index 9b95859..ecf7050 100644 --- a/Doc/c-api/string.rst +++ b/Doc/c-api/string.rst @@ -17,20 +17,20 @@ called with a non-string parameter. .. index:: object: string -.. ctype:: PyStringObject +.. c:type:: PyStringObject - This subtype of :ctype:`PyObject` represents a Python string object. + This subtype of :c:type:`PyObject` represents a Python string object. -.. cvar:: PyTypeObject PyString_Type +.. c:var:: PyTypeObject PyString_Type .. index:: single: StringType (in module types) - This instance of :ctype:`PyTypeObject` represents the Python string type; it is + This instance of :c:type:`PyTypeObject` represents the Python string type; it is the same object as ``str`` and ``types.StringType`` in the Python layer. . -.. cfunction:: int PyString_Check(PyObject *o) +.. c:function:: int PyString_Check(PyObject *o) Return true if the object *o* is a string object or an instance of a subtype of the string type. @@ -39,7 +39,7 @@ called with a non-string parameter. Allowed subtypes to be accepted. -.. cfunction:: int PyString_CheckExact(PyObject *o) +.. c:function:: int PyString_CheckExact(PyObject *o) Return true if the object *o* is a string object, but not an instance of a subtype of the string type. @@ -47,27 +47,27 @@ called with a non-string parameter. .. versionadded:: 2.2 -.. cfunction:: PyObject* PyString_FromString(const char *v) +.. c:function:: PyObject* PyString_FromString(const char *v) Return a new string object with a copy of the string *v* as value on success, and *NULL* on failure. The parameter *v* must not be *NULL*; it will not be checked. -.. cfunction:: PyObject* PyString_FromStringAndSize(const char *v, Py_ssize_t len) +.. c:function:: PyObject* PyString_FromStringAndSize(const char *v, Py_ssize_t len) Return a new string object with a copy of the string *v* as value and length *len* on success, and *NULL* on failure. If *v* is *NULL*, the contents of the string are uninitialized. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *len*. This might require + This function used an :c:type:`int` type for *len*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: PyObject* PyString_FromFormat(const char *format, ...) +.. c:function:: PyObject* PyString_FromFormat(const char *format, ...) - Take a C :cfunc:`printf`\ -style *format* string and a variable number of + Take a C :c:func:`printf`\ -style *format* string and a variable number of arguments, calculate the size of the resulting Python string and return a string with the values formatted into it. The variable arguments must be C types and must correspond exactly to the format characters in the *format* string. The @@ -144,31 +144,31 @@ called with a non-string parameter. Support for `"%lld"` and `"%llu"` added. -.. cfunction:: PyObject* PyString_FromFormatV(const char *format, va_list vargs) +.. c:function:: PyObject* PyString_FromFormatV(const char *format, va_list vargs) - Identical to :cfunc:`PyString_FromFormat` except that it takes exactly two + Identical to :c:func:`PyString_FromFormat` except that it takes exactly two arguments. -.. cfunction:: Py_ssize_t PyString_Size(PyObject *string) +.. c:function:: Py_ssize_t PyString_Size(PyObject *string) Return the length of the string in string object *string*. .. versionchanged:: 2.5 - This function returned an :ctype:`int` type. This might require changes + This function returned an :c:type:`int` type. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: Py_ssize_t PyString_GET_SIZE(PyObject *string) +.. c:function:: Py_ssize_t PyString_GET_SIZE(PyObject *string) - Macro form of :cfunc:`PyString_Size` but without error checking. + Macro form of :c:func:`PyString_Size` but without error checking. .. versionchanged:: 2.5 - This macro returned an :ctype:`int` type. This might require changes in + This macro returned an :c:type:`int` type. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: char* PyString_AsString(PyObject *string) +.. c:function:: char* PyString_AsString(PyObject *string) Return a NUL-terminated representation of the contents of *string*. The pointer refers to the internal buffer of *string*, not a copy. The data must not be @@ -176,16 +176,16 @@ called with a non-string parameter. ``PyString_FromStringAndSize(NULL, size)``. It must not be deallocated. If *string* is a Unicode object, this function computes the default encoding of *string* and operates on that. If *string* is not a string object at all, - :cfunc:`PyString_AsString` returns *NULL* and raises :exc:`TypeError`. + :c:func:`PyString_AsString` returns *NULL* and raises :exc:`TypeError`. -.. cfunction:: char* PyString_AS_STRING(PyObject *string) +.. c:function:: char* PyString_AS_STRING(PyObject *string) - Macro form of :cfunc:`PyString_AsString` but without error checking. Only + Macro form of :c:func:`PyString_AsString` but without error checking. Only string objects are supported; no Unicode objects should be passed. -.. cfunction:: int PyString_AsStringAndSize(PyObject *obj, char **buffer, Py_ssize_t *length) +.. c:function:: int PyString_AsStringAndSize(PyObject *obj, char **buffer, Py_ssize_t *length) Return a NUL-terminated representation of the contents of the object *obj* through the output variables *buffer* and *length*. @@ -200,14 +200,14 @@ called with a non-string parameter. ``PyString_FromStringAndSize(NULL, size)``. It must not be deallocated. If *string* is a Unicode object, this function computes the default encoding of *string* and operates on that. If *string* is not a string object at all, - :cfunc:`PyString_AsStringAndSize` returns ``-1`` and raises :exc:`TypeError`. + :c:func:`PyString_AsStringAndSize` returns ``-1`` and raises :exc:`TypeError`. .. versionchanged:: 2.5 - This function used an :ctype:`int *` type for *length*. This might + This function used an :c:type:`int *` type for *length*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: void PyString_Concat(PyObject **string, PyObject *newpart) +.. c:function:: void PyString_Concat(PyObject **string, PyObject *newpart) Create a new string object in *\*string* containing the contents of *newpart* appended to *string*; the caller will own the new reference. The reference to @@ -216,13 +216,13 @@ called with a non-string parameter. *\*string* will be set to *NULL*; the appropriate exception will be set. -.. cfunction:: void PyString_ConcatAndDel(PyObject **string, PyObject *newpart) +.. c:function:: void PyString_ConcatAndDel(PyObject **string, PyObject *newpart) Create a new string object in *\*string* containing the contents of *newpart* appended to *string*. This version decrements the reference count of *newpart*. -.. cfunction:: int _PyString_Resize(PyObject **string, Py_ssize_t newsize) +.. c:function:: int _PyString_Resize(PyObject **string, Py_ssize_t newsize) A way to resize a string object even though it is "immutable". Only use this to build up a brand new string object; don't use this if the string may already be @@ -235,16 +235,16 @@ called with a non-string parameter. set to *NULL*, a memory exception is set, and ``-1`` is returned. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *newsize*. This might + This function used an :c:type:`int` type for *newsize*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: PyObject* PyString_Format(PyObject *format, PyObject *args) +.. c:function:: PyObject* PyString_Format(PyObject *format, PyObject *args) Return a new string object from *format* and *args*. Analogous to ``format % args``. The *args* argument must be a tuple. -.. cfunction:: void PyString_InternInPlace(PyObject **string) +.. c:function:: void PyString_InternInPlace(PyObject **string) Intern the argument *\*string* in place. The argument must be the address of a pointer variable pointing to a Python string object. If there is an existing @@ -261,10 +261,10 @@ called with a non-string parameter. This function is not available in 3.x and does not have a PyBytes alias. -.. cfunction:: PyObject* PyString_InternFromString(const char *v) +.. c:function:: PyObject* PyString_InternFromString(const char *v) - A combination of :cfunc:`PyString_FromString` and - :cfunc:`PyString_InternInPlace`, returning either a new string object that has + A combination of :c:func:`PyString_FromString` and + :c:func:`PyString_InternInPlace`, returning either a new string object that has been interned, or a new ("owned") reference to an earlier interned string object with the same value. @@ -273,7 +273,7 @@ called with a non-string parameter. This function is not available in 3.x and does not have a PyBytes alias. -.. cfunction:: PyObject* PyString_Decode(const char *s, Py_ssize_t size, const char *encoding, const char *errors) +.. c:function:: PyObject* PyString_Decode(const char *s, Py_ssize_t size, const char *encoding, const char *errors) Create an object by decoding *size* bytes of the encoded buffer *s* using the codec registered for *encoding*. *encoding* and *errors* have the same meaning @@ -286,11 +286,11 @@ called with a non-string parameter. This function is not available in 3.x and does not have a PyBytes alias. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *size*. This might require + This function used an :c:type:`int` type for *size*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: PyObject* PyString_AsDecodedObject(PyObject *str, const char *encoding, const char *errors) +.. c:function:: PyObject* PyString_AsDecodedObject(PyObject *str, const char *encoding, const char *errors) Decode a string object by passing it to the codec registered for *encoding* and return the result as Python object. *encoding* and *errors* have the same @@ -303,9 +303,9 @@ called with a non-string parameter. This function is not available in 3.x and does not have a PyBytes alias. -.. cfunction:: PyObject* PyString_Encode(const char *s, Py_ssize_t size, const char *encoding, const char *errors) +.. c:function:: PyObject* PyString_Encode(const char *s, Py_ssize_t size, const char *encoding, const char *errors) - Encode the :ctype:`char` buffer of the given size by passing it to the codec + Encode the :c:type:`char` buffer of the given size by passing it to the codec registered for *encoding* and return a Python object. *encoding* and *errors* have the same meaning as the parameters of the same name in the string :meth:`encode` method. The codec to be used is looked up using the Python codec @@ -316,11 +316,11 @@ called with a non-string parameter. This function is not available in 3.x and does not have a PyBytes alias. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *size*. This might require + This function used an :c:type:`int` type for *size*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: PyObject* PyString_AsEncodedObject(PyObject *str, const char *encoding, const char *errors) +.. c:function:: PyObject* PyString_AsEncodedObject(PyObject *str, const char *encoding, const char *errors) Encode a string object using the codec registered for *encoding* and return the result as Python object. *encoding* and *errors* have the same meaning as the diff --git a/Doc/c-api/structures.rst b/Doc/c-api/structures.rst index 5be88ac..f5007ac 100644 --- a/Doc/c-api/structures.rst +++ b/Doc/c-api/structures.rst @@ -11,12 +11,12 @@ are used. All Python objects ultimately share a small number of fields at the beginning of the object's representation in memory. These are represented by the -:ctype:`PyObject` and :ctype:`PyVarObject` types, which are defined, in turn, +:c:type:`PyObject` and :c:type:`PyVarObject` types, which are defined, in turn, by the expansions of some macros also used, whether directly or indirectly, in the definition of all other Python objects. -.. ctype:: PyObject +.. c:type:: PyObject All object types are extensions of this type. This is a type which contains the information Python needs to treat a pointer to an object as an @@ -26,79 +26,79 @@ the definition of all other Python objects. macro. -.. ctype:: PyVarObject +.. c:type:: PyVarObject - This is an extension of :ctype:`PyObject` that adds the :attr:`ob_size` + This is an extension of :c:type:`PyObject` that adds the :attr:`ob_size` field. This is only used for objects that have some notion of *length*. This type does not often appear in the Python/C API. It corresponds to the fields defined by the expansion of the ``PyObject_VAR_HEAD`` macro. -These macros are used in the definition of :ctype:`PyObject` and -:ctype:`PyVarObject`: +These macros are used in the definition of :c:type:`PyObject` and +:c:type:`PyVarObject`: -.. cmacro:: PyObject_HEAD +.. c:macro:: PyObject_HEAD This is a macro which expands to the declarations of the fields of the - :ctype:`PyObject` type; it is used when declaring new types which represent + :c:type:`PyObject` type; it is used when declaring new types which represent objects without a varying length. The specific fields it expands to depend - on the definition of :cmacro:`Py_TRACE_REFS`. By default, that macro is - not defined, and :cmacro:`PyObject_HEAD` expands to:: + on the definition of :c:macro:`Py_TRACE_REFS`. By default, that macro is + not defined, and :c:macro:`PyObject_HEAD` expands to:: Py_ssize_t ob_refcnt; PyTypeObject *ob_type; - When :cmacro:`Py_TRACE_REFS` is defined, it expands to:: + When :c:macro:`Py_TRACE_REFS` is defined, it expands to:: PyObject *_ob_next, *_ob_prev; Py_ssize_t ob_refcnt; PyTypeObject *ob_type; -.. cmacro:: PyObject_VAR_HEAD +.. c:macro:: PyObject_VAR_HEAD This is a macro which expands to the declarations of the fields of the - :ctype:`PyVarObject` type; it is used when declaring new types which + :c:type:`PyVarObject` type; it is used when declaring new types which represent objects with a length that varies from instance to instance. This macro always expands to:: PyObject_HEAD Py_ssize_t ob_size; - Note that :cmacro:`PyObject_HEAD` is part of the expansion, and that its own - expansion varies depending on the definition of :cmacro:`Py_TRACE_REFS`. + Note that :c:macro:`PyObject_HEAD` is part of the expansion, and that its own + expansion varies depending on the definition of :c:macro:`Py_TRACE_REFS`. -.. cmacro:: PyObject_HEAD_INIT(type) +.. c:macro:: PyObject_HEAD_INIT(type) This is a macro which expands to initialization values for a new - :ctype:`PyObject` type. This macro expands to:: + :c:type:`PyObject` type. This macro expands to:: _PyObject_EXTRA_INIT 1, type, -.. cmacro:: PyVarObject_HEAD_INIT(type, size) +.. c:macro:: PyVarObject_HEAD_INIT(type, size) This is a macro which expands to initialization values for a new - :ctype:`PyVarObject` type, including the :attr:`ob_size` field. + :c:type:`PyVarObject` type, including the :attr:`ob_size` field. This macro expands to:: _PyObject_EXTRA_INIT 1, type, size, -.. ctype:: PyCFunction +.. c:type:: PyCFunction Type of the functions used to implement most Python callables in C. - Functions of this type take two :ctype:`PyObject\*` parameters and return + Functions of this type take two :c:type:`PyObject\*` parameters and return one such value. If the return value is *NULL*, an exception shall have been set. If not *NULL*, the return value is interpreted as the return value of the function as exposed in Python. The function must return a new reference. -.. ctype:: PyMethodDef +.. c:type:: PyMethodDef Structure used to describe a method of an extension type. This structure has four fields: @@ -119,10 +119,10 @@ These macros are used in the definition of :ctype:`PyObject` and +------------------+-------------+-------------------------------+ The :attr:`ml_meth` is a C function pointer. The functions may be of different -types, but they always return :ctype:`PyObject\*`. If the function is not of -the :ctype:`PyCFunction`, the compiler will require a cast in the method table. -Even though :ctype:`PyCFunction` defines the first parameter as -:ctype:`PyObject\*`, it is common that the method implementation uses a the +types, but they always return :c:type:`PyObject\*`. If the function is not of +the :c:type:`PyCFunction`, the compiler will require a cast in the method table. +Even though :c:type:`PyCFunction` defines the first parameter as +:c:type:`PyObject\*`, it is common that the method implementation uses a the specific C type of the *self* object. The :attr:`ml_flags` field is a bitfield which can include the following flags. @@ -136,27 +136,27 @@ convention flags can be combined with a binding flag. .. data:: METH_VARARGS This is the typical calling convention, where the methods have the type - :ctype:`PyCFunction`. The function expects two :ctype:`PyObject\*` values. + :c:type:`PyCFunction`. The function expects two :c:type:`PyObject\*` values. The first one is the *self* object for methods; for module functions, it is the module object. The second parameter (often called *args*) is a tuple object representing all arguments. This parameter is typically processed - using :cfunc:`PyArg_ParseTuple` or :cfunc:`PyArg_UnpackTuple`. + using :c:func:`PyArg_ParseTuple` or :c:func:`PyArg_UnpackTuple`. .. data:: METH_KEYWORDS - Methods with these flags must be of type :ctype:`PyCFunctionWithKeywords`. + Methods with these flags must be of type :c:type:`PyCFunctionWithKeywords`. The function expects three parameters: *self*, *args*, and a dictionary of all the keyword arguments. The flag is typically combined with :const:`METH_VARARGS`, and the parameters are typically processed using - :cfunc:`PyArg_ParseTupleAndKeywords`. + :c:func:`PyArg_ParseTupleAndKeywords`. .. data:: METH_NOARGS Methods without parameters don't need to check whether arguments are given if they are listed with the :const:`METH_NOARGS` flag. They need to be of type - :ctype:`PyCFunction`. The first parameter is typically named ``self`` and + :c:type:`PyCFunction`. The first parameter is typically named ``self`` and will hold a reference to the module or object instance. In all cases the second parameter will be *NULL*. @@ -164,15 +164,15 @@ convention flags can be combined with a binding flag. .. data:: METH_O Methods with a single object argument can be listed with the :const:`METH_O` - flag, instead of invoking :cfunc:`PyArg_ParseTuple` with a ``"O"`` argument. - They have the type :ctype:`PyCFunction`, with the *self* parameter, and a - :ctype:`PyObject\*` parameter representing the single argument. + flag, instead of invoking :c:func:`PyArg_ParseTuple` with a ``"O"`` argument. + They have the type :c:type:`PyCFunction`, with the *self* parameter, and a + :c:type:`PyObject\*` parameter representing the single argument. .. data:: METH_OLDARGS This calling convention is deprecated. The method must be of type - :ctype:`PyCFunction`. The second argument is *NULL* if no arguments are + :c:type:`PyCFunction`. The second argument is *NULL* if no arguments are given, a single object if exactly one argument is given, and a tuple of objects if more than one argument is given. There is no way for a function using this convention to distinguish between a call with multiple arguments @@ -225,7 +225,7 @@ definition with the same method name. .. versionadded:: 2.4 -.. ctype:: PyMemberDef +.. c:type:: PyMemberDef Structure which describes an attribute of a type which corresponds to a C struct member. Its fields are: @@ -277,22 +277,22 @@ definition with the same method name. T_PYSSIZET Py_ssize_t =============== ================== - :cmacro:`T_OBJECT` and :cmacro:`T_OBJECT_EX` differ in that - :cmacro:`T_OBJECT` returns ``None`` if the member is *NULL* and - :cmacro:`T_OBJECT_EX` raises an :exc:`AttributeError`. Try to use - :cmacro:`T_OBJECT_EX` over :cmacro:`T_OBJECT` because :cmacro:`T_OBJECT_EX` + :c:macro:`T_OBJECT` and :c:macro:`T_OBJECT_EX` differ in that + :c:macro:`T_OBJECT` returns ``None`` if the member is *NULL* and + :c:macro:`T_OBJECT_EX` raises an :exc:`AttributeError`. Try to use + :c:macro:`T_OBJECT_EX` over :c:macro:`T_OBJECT` because :c:macro:`T_OBJECT_EX` handles use of the :keyword:`del` statement on that attribute more correctly - than :cmacro:`T_OBJECT`. + than :c:macro:`T_OBJECT`. - :attr:`flags` can be 0 for write and read access or :cmacro:`READONLY` for - read-only access. Using :cmacro:`T_STRING` for :attr:`type` implies - :cmacro:`READONLY`. Only :cmacro:`T_OBJECT` and :cmacro:`T_OBJECT_EX` + :attr:`flags` can be 0 for write and read access or :c:macro:`READONLY` for + read-only access. Using :c:macro:`T_STRING` for :attr:`type` implies + :c:macro:`READONLY`. Only :c:macro:`T_OBJECT` and :c:macro:`T_OBJECT_EX` members can be deleted. (They are set to *NULL*). -.. cfunction:: PyObject* Py_FindMethod(PyMethodDef table[], PyObject *ob, char *name) +.. c:function:: PyObject* Py_FindMethod(PyMethodDef table[], PyObject *ob, char *name) Return a bound method object for an extension type implemented in C. This can be useful in the implementation of a :attr:`tp_getattro` or :attr:`tp_getattr` handler that does not use the - :cfunc:`PyObject_GenericGetAttr` function. + :c:func:`PyObject_GenericGetAttr` function. diff --git a/Doc/c-api/sys.rst b/Doc/c-api/sys.rst index 6788bc9..d354e9f 100644 --- a/Doc/c-api/sys.rst +++ b/Doc/c-api/sys.rst @@ -6,16 +6,16 @@ Operating System Utilities ========================== -.. cfunction:: int Py_FdIsInteractive(FILE *fp, const char *filename) +.. c:function:: int Py_FdIsInteractive(FILE *fp, const char *filename) Return true (nonzero) if the standard I/O file *fp* with name *filename* is deemed interactive. This is the case for files for which ``isatty(fileno(fp))`` - is true. If the global flag :cdata:`Py_InteractiveFlag` is true, this function + is true. If the global flag :c:data:`Py_InteractiveFlag` is true, this function also returns true if the *filename* pointer is *NULL* or if the name is equal to one of the strings ``'<stdin>'`` or ``'???'``. -.. cfunction:: void PyOS_AfterFork() +.. c:function:: void PyOS_AfterFork() Function to update some internal state after a process fork; this should be called in the new process if the Python interpreter will continue to be used. @@ -23,7 +23,7 @@ Operating System Utilities to be called. -.. cfunction:: int PyOS_CheckStack() +.. c:function:: int PyOS_CheckStack() Return true when the interpreter runs out of stack space. This is a reliable check, but is only available when :const:`USE_STACKCHECK` is defined (currently @@ -32,20 +32,20 @@ Operating System Utilities own code. -.. cfunction:: PyOS_sighandler_t PyOS_getsig(int i) +.. c:function:: PyOS_sighandler_t PyOS_getsig(int i) Return the current signal handler for signal *i*. This is a thin wrapper around - either :cfunc:`sigaction` or :cfunc:`signal`. Do not call those functions - directly! :ctype:`PyOS_sighandler_t` is a typedef alias for :ctype:`void + either :c:func:`sigaction` or :c:func:`signal`. Do not call those functions + directly! :c:type:`PyOS_sighandler_t` is a typedef alias for :c:type:`void (\*)(int)`. -.. cfunction:: PyOS_sighandler_t PyOS_setsig(int i, PyOS_sighandler_t h) +.. c:function:: PyOS_sighandler_t PyOS_setsig(int i, PyOS_sighandler_t h) Set the signal handler for signal *i* to be *h*; return the old signal handler. - This is a thin wrapper around either :cfunc:`sigaction` or :cfunc:`signal`. Do - not call those functions directly! :ctype:`PyOS_sighandler_t` is a typedef - alias for :ctype:`void (\*)(int)`. + This is a thin wrapper around either :c:func:`sigaction` or :c:func:`signal`. Do + not call those functions directly! :c:type:`PyOS_sighandler_t` is a typedef + alias for :c:type:`void (\*)(int)`. .. _systemfunctions: @@ -56,38 +56,38 @@ These are utility functions that make functionality from the :mod:`sys` module accessible to C code. They all work with the current interpreter thread's :mod:`sys` module's dict, which is contained in the internal thread state structure. -.. cfunction:: PyObject *PySys_GetObject(char *name) +.. c:function:: PyObject *PySys_GetObject(char *name) Return the object *name* from the :mod:`sys` module or *NULL* if it does not exist, without setting an exception. -.. cfunction:: FILE *PySys_GetFile(char *name, FILE *def) +.. c:function:: FILE *PySys_GetFile(char *name, FILE *def) - Return the :ctype:`FILE*` associated with the object *name* in the + Return the :c:type:`FILE*` associated with the object *name* in the :mod:`sys` module, or *def* if *name* is not in the module or is not associated - with a :ctype:`FILE*`. + with a :c:type:`FILE*`. -.. cfunction:: int PySys_SetObject(char *name, PyObject *v) +.. c:function:: int PySys_SetObject(char *name, PyObject *v) Set *name* in the :mod:`sys` module to *v* unless *v* is *NULL*, in which case *name* is deleted from the sys module. Returns ``0`` on success, ``-1`` on error. -.. cfunction:: void PySys_ResetWarnOptions() +.. c:function:: void PySys_ResetWarnOptions() Reset :data:`sys.warnoptions` to an empty list. -.. cfunction:: void PySys_AddWarnOption(char *s) +.. c:function:: void PySys_AddWarnOption(char *s) Append *s* to :data:`sys.warnoptions`. -.. cfunction:: void PySys_SetPath(char *path) +.. c:function:: void PySys_SetPath(char *path) Set :data:`sys.path` to a list object of paths found in *path* which should be a list of paths separated with the platform's search path delimiter (``:`` on Unix, ``;`` on Windows). -.. cfunction:: void PySys_WriteStdout(const char *format, ...) +.. c:function:: void PySys_WriteStdout(const char *format, ...) Write the output string described by *format* to :data:`sys.stdout`. No exceptions are raised, even if truncation occurs (see below). @@ -103,7 +103,7 @@ accessible to C code. They all work with the current interpreter thread's If a problem occurs, or :data:`sys.stdout` is unset, the formatted message is written to the real (C level) *stdout*. -.. cfunction:: void PySys_WriteStderr(const char *format, ...) +.. c:function:: void PySys_WriteStderr(const char *format, ...) As above, but write to :data:`sys.stderr` or *stderr* instead. @@ -114,7 +114,7 @@ Process Control =============== -.. cfunction:: void Py_FatalError(const char *message) +.. c:function:: void Py_FatalError(const char *message) .. index:: single: abort() @@ -122,30 +122,30 @@ Process Control This function should only be invoked when a condition is detected that would make it dangerous to continue using the Python interpreter; e.g., when the object administration appears to be corrupted. On Unix, the standard C library - function :cfunc:`abort` is called which will attempt to produce a :file:`core` + function :c:func:`abort` is called which will attempt to produce a :file:`core` file. -.. cfunction:: void Py_Exit(int status) +.. c:function:: void Py_Exit(int status) .. index:: single: Py_Finalize() single: exit() - Exit the current process. This calls :cfunc:`Py_Finalize` and then calls the + Exit the current process. This calls :c:func:`Py_Finalize` and then calls the standard C library function ``exit(status)``. -.. cfunction:: int Py_AtExit(void (*func) ()) +.. c:function:: int Py_AtExit(void (*func) ()) .. index:: single: Py_Finalize() single: cleanup functions - Register a cleanup function to be called by :cfunc:`Py_Finalize`. The cleanup + Register a cleanup function to be called by :c:func:`Py_Finalize`. The cleanup function will be called with no arguments and should return no value. At most 32 cleanup functions can be registered. When the registration is successful, - :cfunc:`Py_AtExit` returns ``0``; on failure, it returns ``-1``. The cleanup + :c:func:`Py_AtExit` returns ``0``; on failure, it returns ``-1``. The cleanup function registered last is called first. Each cleanup function will be called at most once. Since Python's internal finalization will have completed before the cleanup function, no Python APIs should be called by *func*. diff --git a/Doc/c-api/tuple.rst b/Doc/c-api/tuple.rst index eb479d5..16de45f 100644 --- a/Doc/c-api/tuple.rst +++ b/Doc/c-api/tuple.rst @@ -8,20 +8,20 @@ Tuple Objects .. index:: object: tuple -.. ctype:: PyTupleObject +.. c:type:: PyTupleObject - This subtype of :ctype:`PyObject` represents a Python tuple object. + This subtype of :c:type:`PyObject` represents a Python tuple object. -.. cvar:: PyTypeObject PyTuple_Type +.. c:var:: PyTypeObject PyTuple_Type .. index:: single: TupleType (in module types) - This instance of :ctype:`PyTypeObject` represents the Python tuple type; it is + This instance of :c:type:`PyTypeObject` represents the Python tuple type; it is the same object as ``tuple`` and ``types.TupleType`` in the Python layer.. -.. cfunction:: int PyTuple_Check(PyObject *p) +.. c:function:: int PyTuple_Check(PyObject *p) Return true if *p* is a tuple object or an instance of a subtype of the tuple type. @@ -30,7 +30,7 @@ Tuple Objects Allowed subtypes to be accepted. -.. cfunction:: int PyTuple_CheckExact(PyObject *p) +.. c:function:: int PyTuple_CheckExact(PyObject *p) Return true if *p* is a tuple object, but not an instance of a subtype of the tuple type. @@ -38,16 +38,16 @@ Tuple Objects .. versionadded:: 2.2 -.. cfunction:: PyObject* PyTuple_New(Py_ssize_t len) +.. c:function:: PyObject* PyTuple_New(Py_ssize_t len) Return a new tuple object of size *len*, or *NULL* on failure. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *len*. This might require + This function used an :c:type:`int` type for *len*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: PyObject* PyTuple_Pack(Py_ssize_t n, ...) +.. c:function:: PyObject* PyTuple_Pack(Py_ssize_t n, ...) Return a new tuple object of size *n*, or *NULL* on failure. The tuple values are initialized to the subsequent *n* C arguments pointing to Python objects. @@ -56,59 +56,59 @@ Tuple Objects .. versionadded:: 2.4 .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *n*. This might require + This function used an :c:type:`int` type for *n*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: Py_ssize_t PyTuple_Size(PyObject *p) +.. c:function:: Py_ssize_t PyTuple_Size(PyObject *p) Take a pointer to a tuple object, and return the size of that tuple. .. versionchanged:: 2.5 - This function returned an :ctype:`int` type. This might require changes + This function returned an :c:type:`int` type. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: Py_ssize_t PyTuple_GET_SIZE(PyObject *p) +.. c:function:: Py_ssize_t PyTuple_GET_SIZE(PyObject *p) Return the size of the tuple *p*, which must be non-*NULL* and point to a tuple; no error checking is performed. .. versionchanged:: 2.5 - This function returned an :ctype:`int` type. This might require changes + This function returned an :c:type:`int` type. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: PyObject* PyTuple_GetItem(PyObject *p, Py_ssize_t pos) +.. c:function:: PyObject* PyTuple_GetItem(PyObject *p, Py_ssize_t pos) Return the object at position *pos* in the tuple pointed to by *p*. If *pos* is out of bounds, return *NULL* and sets an :exc:`IndexError` exception. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *pos*. This might require + This function used an :c:type:`int` type for *pos*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: PyObject* PyTuple_GET_ITEM(PyObject *p, Py_ssize_t pos) +.. c:function:: PyObject* PyTuple_GET_ITEM(PyObject *p, Py_ssize_t pos) - Like :cfunc:`PyTuple_GetItem`, but does no checking of its arguments. + Like :c:func:`PyTuple_GetItem`, but does no checking of its arguments. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *pos*. This might require + This function used an :c:type:`int` type for *pos*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: PyObject* PyTuple_GetSlice(PyObject *p, Py_ssize_t low, Py_ssize_t high) +.. c:function:: PyObject* PyTuple_GetSlice(PyObject *p, Py_ssize_t low, Py_ssize_t high) Take a slice of the tuple pointed to by *p* from *low* to *high* and return it as a new tuple. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *low* and *high*. This might + This function used an :c:type:`int` type for *low* and *high*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: int PyTuple_SetItem(PyObject *p, Py_ssize_t pos, PyObject *o) +.. c:function:: int PyTuple_SetItem(PyObject *p, Py_ssize_t pos, PyObject *o) Insert a reference to object *o* at position *pos* of the tuple pointed to by *p*. Return ``0`` on success. @@ -118,13 +118,13 @@ Tuple Objects This function "steals" a reference to *o*. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *pos*. This might require + This function used an :c:type:`int` type for *pos*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: void PyTuple_SET_ITEM(PyObject *p, Py_ssize_t pos, PyObject *o) +.. c:function:: void PyTuple_SET_ITEM(PyObject *p, Py_ssize_t pos, PyObject *o) - Like :cfunc:`PyTuple_SetItem`, but does no error checking, and should *only* be + Like :c:func:`PyTuple_SetItem`, but does no error checking, and should *only* be used to fill in brand new tuples. .. note:: @@ -132,11 +132,11 @@ Tuple Objects This function "steals" a reference to *o*. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *pos*. This might require + This function used an :c:type:`int` type for *pos*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: int _PyTuple_Resize(PyObject **p, Py_ssize_t newsize) +.. c:function:: int _PyTuple_Resize(PyObject **p, Py_ssize_t newsize) Can be used to resize a tuple. *newsize* will be the new length of the tuple. Because tuples are *supposed* to be immutable, this should only be used if there @@ -153,11 +153,11 @@ Tuple Objects Removed unused third parameter, *last_is_sticky*. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *newsize*. This might + This function used an :c:type:`int` type for *newsize*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: int PyTuple_ClearFreeList() +.. c:function:: int PyTuple_ClearFreeList() Clear the free list. Return the total number of freed items. diff --git a/Doc/c-api/type.rst b/Doc/c-api/type.rst index 7d1c773..22f7dd0 100644 --- a/Doc/c-api/type.rst +++ b/Doc/c-api/type.rst @@ -8,12 +8,12 @@ Type Objects .. index:: object: type -.. ctype:: PyTypeObject +.. c:type:: PyTypeObject The C structure of the objects used to describe built-in types. -.. cvar:: PyObject* PyType_Type +.. c:var:: PyObject* PyType_Type .. index:: single: TypeType (in module types) @@ -21,13 +21,13 @@ Type Objects ``types.TypeType`` in the Python layer. -.. cfunction:: int PyType_Check(PyObject *o) +.. c:function:: int PyType_Check(PyObject *o) Return true if the object *o* is a type object, including instances of types derived from the standard type object. Return false in all other cases. -.. cfunction:: int PyType_CheckExact(PyObject *o) +.. c:function:: int PyType_CheckExact(PyObject *o) Return true if the object *o* is a type object, but not a subtype of the standard type object. Return false in all other cases. @@ -35,14 +35,14 @@ Type Objects .. versionadded:: 2.2 -.. cfunction:: unsigned int PyType_ClearCache() +.. c:function:: unsigned int PyType_ClearCache() Clear the internal lookup cache. Return the current version tag. .. versionadded:: 2.6 -.. cfunction:: void PyType_Modified(PyTypeObject *type) +.. c:function:: void PyType_Modified(PyTypeObject *type) Invalidate the internal lookup cache for the type and all of its subtypes. This function must be called after any manual @@ -51,13 +51,13 @@ Type Objects .. versionadded:: 2.6 -.. cfunction:: int PyType_HasFeature(PyObject *o, int feature) +.. c:function:: int PyType_HasFeature(PyObject *o, int feature) Return true if the type object *o* sets the feature *feature*. Type features are denoted by single bit flags. -.. cfunction:: int PyType_IS_GC(PyObject *o) +.. c:function:: int PyType_IS_GC(PyObject *o) Return true if the type object includes support for the cycle detector; this tests the type flag :const:`Py_TPFLAGS_HAVE_GC`. @@ -65,28 +65,28 @@ Type Objects .. versionadded:: 2.0 -.. cfunction:: int PyType_IsSubtype(PyTypeObject *a, PyTypeObject *b) +.. c:function:: int PyType_IsSubtype(PyTypeObject *a, PyTypeObject *b) Return true if *a* is a subtype of *b*. .. versionadded:: 2.2 -.. cfunction:: PyObject* PyType_GenericAlloc(PyTypeObject *type, Py_ssize_t nitems) +.. c:function:: PyObject* PyType_GenericAlloc(PyTypeObject *type, Py_ssize_t nitems) .. versionadded:: 2.2 .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *nitems*. This might require + This function used an :c:type:`int` type for *nitems*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: PyObject* PyType_GenericNew(PyTypeObject *type, PyObject *args, PyObject *kwds) +.. c:function:: PyObject* PyType_GenericNew(PyTypeObject *type, PyObject *args, PyObject *kwds) .. versionadded:: 2.2 -.. cfunction:: int PyType_Ready(PyTypeObject *type) +.. c:function:: int PyType_Ready(PyTypeObject *type) Finalize a type object. This should be called on all type objects to finish their initialization. This function is responsible for adding inherited slots diff --git a/Doc/c-api/typeobj.rst b/Doc/c-api/typeobj.rst index 9af4cfc..5bda1ff 100644 --- a/Doc/c-api/typeobj.rst +++ b/Doc/c-api/typeobj.rst @@ -6,9 +6,9 @@ Type Objects ============ Perhaps one of the most important structures of the Python object system is the -structure that defines a new type: the :ctype:`PyTypeObject` structure. Type -objects can be handled using any of the :cfunc:`PyObject_\*` or -:cfunc:`PyType_\*` functions, but do not offer much that's interesting to most +structure that defines a new type: the :c:type:`PyTypeObject` structure. Type +objects can be handled using any of the :c:func:`PyObject_\*` or +:c:func:`PyType_\*` functions, but do not offer much that's interesting to most Python applications. These objects are fundamental to how objects behave, so they are very important to the interpreter itself and to any extension module that implements new types. @@ -25,21 +25,21 @@ intintargfunc, intobjargproc, intintobjargproc, objobjargproc, destructor, freefunc, printfunc, getattrfunc, getattrofunc, setattrfunc, setattrofunc, cmpfunc, reprfunc, hashfunc -The structure definition for :ctype:`PyTypeObject` can be found in +The structure definition for :c:type:`PyTypeObject` can be found in :file:`Include/object.h`. For convenience of reference, this repeats the definition found there: .. literalinclude:: ../includes/typestruct.h -The type object structure extends the :ctype:`PyVarObject` structure. The +The type object structure extends the :c:type:`PyVarObject` structure. The :attr:`ob_size` field is used for dynamic types (created by :func:`type_new`, -usually called from a class statement). Note that :cdata:`PyType_Type` (the +usually called from a class statement). Note that :c:data:`PyType_Type` (the metatype) initializes :attr:`tp_itemsize`, which means that its instances (i.e. type objects) *must* have the :attr:`ob_size` field. -.. cmember:: PyObject* PyObject._ob_next +.. c:member:: PyObject* PyObject._ob_next PyObject* PyObject._ob_prev These fields are only present when the macro ``Py_TRACE_REFS`` is defined. @@ -54,7 +54,7 @@ type objects) *must* have the :attr:`ob_size` field. These fields are not inherited by subtypes. -.. cmember:: Py_ssize_t PyObject.ob_refcnt +.. c:member:: Py_ssize_t PyObject.ob_refcnt This is the type object's reference count, initialized to ``1`` by the ``PyObject_HEAD_INIT`` macro. Note that for statically allocated type objects, @@ -65,11 +65,11 @@ type objects) *must* have the :attr:`ob_size` field. This field is not inherited by subtypes. .. versionchanged:: 2.5 - This field used to be an :ctype:`int` type. This might require changes + This field used to be an :c:type:`int` type. This might require changes in your code for properly supporting 64-bit systems. -.. cmember:: PyTypeObject* PyObject.ob_type +.. c:member:: PyTypeObject* PyObject.ob_type This is the type's type, in other words its metatype. It is initialized by the argument to the ``PyObject_HEAD_INIT`` macro, and its value should normally be @@ -83,16 +83,16 @@ type objects) *must* have the :attr:`ob_size` field. Foo_Type.ob_type = &PyType_Type; This should be done before any instances of the type are created. - :cfunc:`PyType_Ready` checks if :attr:`ob_type` is *NULL*, and if so, + :c:func:`PyType_Ready` checks if :attr:`ob_type` is *NULL*, and if so, initializes it: in Python 2.2, it is set to ``&PyType_Type``; in Python 2.2.1 and later it is initialized to the :attr:`ob_type` field of the base class. - :cfunc:`PyType_Ready` will not change this field if it is non-zero. + :c:func:`PyType_Ready` will not change this field if it is non-zero. In Python 2.2, this field is not inherited by subtypes. In 2.2.1, and in 2.3 and beyond, it is inherited by subtypes. -.. cmember:: Py_ssize_t PyVarObject.ob_size +.. c:member:: Py_ssize_t PyVarObject.ob_size For statically allocated type objects, this should be initialized to zero. For dynamically allocated type objects, this field has a special internal meaning. @@ -100,7 +100,7 @@ type objects) *must* have the :attr:`ob_size` field. This field is not inherited by subtypes. -.. cmember:: char* PyTypeObject.tp_name +.. c:member:: char* PyTypeObject.tp_name Pointer to a NUL-terminated string containing the name of the type. For types that are accessible as module globals, the string should be the full module @@ -127,7 +127,7 @@ type objects) *must* have the :attr:`ob_size` field. This field is not inherited by subtypes. -.. cmember:: Py_ssize_t PyTypeObject.tp_basicsize +.. c:member:: Py_ssize_t PyTypeObject.tp_basicsize Py_ssize_t PyTypeObject.tp_itemsize These fields allow calculating the size in bytes of instances of the type. @@ -149,7 +149,7 @@ type objects) *must* have the :attr:`ob_size` field. field). The basic size includes the fields in the instance declared by the macro - :cmacro:`PyObject_HEAD` or :cmacro:`PyObject_VAR_HEAD` (whichever is used to + :c:macro:`PyObject_HEAD` or :c:macro:`PyObject_VAR_HEAD` (whichever is used to declare the instance struct) and this in turn includes the :attr:`_ob_prev` and :attr:`_ob_next` fields if they are present. This means that the only correct way to get an initializer for the :attr:`tp_basicsize` is to use the @@ -170,14 +170,14 @@ type objects) *must* have the :attr:`ob_size` field. alignment requirement for ``double``). -.. cmember:: destructor PyTypeObject.tp_dealloc +.. c:member:: destructor PyTypeObject.tp_dealloc A pointer to the instance destructor function. This function must be defined unless the type guarantees that its instances will never be deallocated (as is the case for the singletons ``None`` and ``Ellipsis``). - The destructor function is called by the :cfunc:`Py_DECREF` and - :cfunc:`Py_XDECREF` macros when the new reference count is zero. At this point, + The destructor function is called by the :c:func:`Py_DECREF` and + :c:func:`Py_XDECREF` macros when the new reference count is zero. At this point, the instance is still in existence, but there are no references to it. The destructor function should free all references which the instance owns, free all memory buffers owned by the instance (using the freeing function corresponding @@ -186,15 +186,15 @@ type objects) *must* have the :attr:`ob_size` field. subtypable (doesn't have the :const:`Py_TPFLAGS_BASETYPE` flag bit set), it is permissible to call the object deallocator directly instead of via :attr:`tp_free`. The object deallocator should be the one used to allocate the - instance; this is normally :cfunc:`PyObject_Del` if the instance was allocated - using :cfunc:`PyObject_New` or :cfunc:`PyObject_VarNew`, or - :cfunc:`PyObject_GC_Del` if the instance was allocated using - :cfunc:`PyObject_GC_New` or :cfunc:`PyObject_GC_NewVar`. + instance; this is normally :c:func:`PyObject_Del` if the instance was allocated + using :c:func:`PyObject_New` or :c:func:`PyObject_VarNew`, or + :c:func:`PyObject_GC_Del` if the instance was allocated using + :c:func:`PyObject_GC_New` or :c:func:`PyObject_GC_NewVar`. This field is inherited by subtypes. -.. cmember:: printfunc PyTypeObject.tp_print +.. c:member:: printfunc PyTypeObject.tp_print An optional pointer to the instance print function. @@ -205,7 +205,7 @@ type objects) *must* have the :attr:`ob_size` field. *NULL*. A type should never implement :attr:`tp_print` in a way that produces different output than :attr:`tp_repr` or :attr:`tp_str` would. - The print function is called with the same signature as :cfunc:`PyObject_Print`: + The print function is called with the same signature as :c:func:`PyObject_Print`: ``int tp_print(PyObject *self, FILE *file, int flags)``. The *self* argument is the instance to be printed. The *file* argument is the stdio file to which it is to be printed. The *flags* argument is composed of flag bits. The only flag @@ -223,39 +223,39 @@ type objects) *must* have the :attr:`ob_size` field. This field is inherited by subtypes. -.. cmember:: getattrfunc PyTypeObject.tp_getattr +.. c:member:: getattrfunc PyTypeObject.tp_getattr An optional pointer to the get-attribute-string function. This field is deprecated. When it is defined, it should point to a function that acts the same as the :attr:`tp_getattro` function, but taking a C string instead of a Python string object to give the attribute name. The signature is - the same as for :cfunc:`PyObject_GetAttrString`. + the same as for :c:func:`PyObject_GetAttrString`. This field is inherited by subtypes together with :attr:`tp_getattro`: a subtype inherits both :attr:`tp_getattr` and :attr:`tp_getattro` from its base type when the subtype's :attr:`tp_getattr` and :attr:`tp_getattro` are both *NULL*. -.. cmember:: setattrfunc PyTypeObject.tp_setattr +.. c:member:: setattrfunc PyTypeObject.tp_setattr An optional pointer to the set-attribute-string function. This field is deprecated. When it is defined, it should point to a function that acts the same as the :attr:`tp_setattro` function, but taking a C string instead of a Python string object to give the attribute name. The signature is - the same as for :cfunc:`PyObject_SetAttrString`. + the same as for :c:func:`PyObject_SetAttrString`. This field is inherited by subtypes together with :attr:`tp_setattro`: a subtype inherits both :attr:`tp_setattr` and :attr:`tp_setattro` from its base type when the subtype's :attr:`tp_setattr` and :attr:`tp_setattro` are both *NULL*. -.. cmember:: cmpfunc PyTypeObject.tp_compare +.. c:member:: cmpfunc PyTypeObject.tp_compare An optional pointer to the three-way comparison function. - The signature is the same as for :cfunc:`PyObject_Compare`. The function should + The signature is the same as for :c:func:`PyObject_Compare`. The function should return ``1`` if *self* greater than *other*, ``0`` if *self* is equal to *other*, and ``-1`` if *self* less than *other*. It should return ``-1`` and set an exception condition when an error occurred during the comparison. @@ -266,14 +266,14 @@ type objects) *must* have the :attr:`ob_size` field. :attr:`tp_compare`, :attr:`tp_richcompare`, and :attr:`tp_hash` are all *NULL*. -.. cmember:: reprfunc PyTypeObject.tp_repr +.. c:member:: reprfunc PyTypeObject.tp_repr .. index:: builtin: repr An optional pointer to a function that implements the built-in function :func:`repr`. - The signature is the same as for :cfunc:`PyObject_Repr`; it must return a string + The signature is the same as for :c:func:`PyObject_Repr`; it must return a string or a Unicode object. Ideally, this function should return a string that, when passed to :func:`eval`, given a suitable environment, returns an object with the same value. If this is not feasible, it should return a string starting with @@ -286,7 +286,7 @@ type objects) *must* have the :attr:`ob_size` field. This field is inherited by subtypes. -.. cmember:: PyNumberMethods* tp_as_number +.. c:member:: PyNumberMethods* tp_as_number Pointer to an additional structure that contains fields relevant only to objects which implement the number protocol. These fields are documented in @@ -296,7 +296,7 @@ type objects) *must* have the :attr:`ob_size` field. inherited individually. -.. cmember:: PySequenceMethods* tp_as_sequence +.. c:member:: PySequenceMethods* tp_as_sequence Pointer to an additional structure that contains fields relevant only to objects which implement the sequence protocol. These fields are documented @@ -306,7 +306,7 @@ type objects) *must* have the :attr:`ob_size` field. are inherited individually. -.. cmember:: PyMappingMethods* tp_as_mapping +.. c:member:: PyMappingMethods* tp_as_mapping Pointer to an additional structure that contains fields relevant only to objects which implement the mapping protocol. These fields are documented in @@ -316,25 +316,25 @@ type objects) *must* have the :attr:`ob_size` field. are inherited individually. -.. cmember:: hashfunc PyTypeObject.tp_hash +.. c:member:: hashfunc PyTypeObject.tp_hash .. index:: builtin: hash An optional pointer to a function that implements the built-in function :func:`hash`. - The signature is the same as for :cfunc:`PyObject_Hash`; it must return a C + The signature is the same as for :c:func:`PyObject_Hash`; it must return a C long. The value ``-1`` should not be returned as a normal return value; when an error occurs during the computation of the hash value, the function should set an exception and return ``-1``. - This field can be set explicitly to :cfunc:`PyObject_HashNotImplemented` to + This field can be set explicitly to :c:func:`PyObject_HashNotImplemented` to block inheritance of the hash method from a parent type. This is interpreted as the equivalent of ``__hash__ = None`` at the Python level, causing ``isinstance(o, collections.Hashable)`` to correctly return ``False``. Note that the converse is also true - setting ``__hash__ = None`` on a class at the Python level will result in the ``tp_hash`` slot being set to - :cfunc:`PyObject_HashNotImplemented`. + :c:func:`PyObject_HashNotImplemented`. When this field is not set, two possibilities exist: if the :attr:`tp_compare` and :attr:`tp_richcompare` fields are both *NULL*, a default hash value based on @@ -346,39 +346,39 @@ type objects) *must* have the :attr:`ob_size` field. :attr:`tp_compare`, :attr:`tp_richcompare` and :attr:`tp_hash` are all *NULL*. -.. cmember:: ternaryfunc PyTypeObject.tp_call +.. c:member:: ternaryfunc PyTypeObject.tp_call An optional pointer to a function that implements calling the object. This should be *NULL* if the object is not callable. The signature is the same as - for :cfunc:`PyObject_Call`. + for :c:func:`PyObject_Call`. This field is inherited by subtypes. -.. cmember:: reprfunc PyTypeObject.tp_str +.. c:member:: reprfunc PyTypeObject.tp_str An optional pointer to a function that implements the built-in operation :func:`str`. (Note that :class:`str` is a type now, and :func:`str` calls the - constructor for that type. This constructor calls :cfunc:`PyObject_Str` to do - the actual work, and :cfunc:`PyObject_Str` will call this handler.) + constructor for that type. This constructor calls :c:func:`PyObject_Str` to do + the actual work, and :c:func:`PyObject_Str` will call this handler.) - The signature is the same as for :cfunc:`PyObject_Str`; it must return a string + The signature is the same as for :c:func:`PyObject_Str`; it must return a string or a Unicode object. This function should return a "friendly" string representation of the object, as this is the representation that will be used by the print statement. - When this field is not set, :cfunc:`PyObject_Repr` is called to return a string + When this field is not set, :c:func:`PyObject_Repr` is called to return a string representation. This field is inherited by subtypes. -.. cmember:: getattrofunc PyTypeObject.tp_getattro +.. c:member:: getattrofunc PyTypeObject.tp_getattro An optional pointer to the get-attribute function. - The signature is the same as for :cfunc:`PyObject_GetAttr`. It is usually - convenient to set this field to :cfunc:`PyObject_GenericGetAttr`, which + The signature is the same as for :c:func:`PyObject_GetAttr`. It is usually + convenient to set this field to :c:func:`PyObject_GenericGetAttr`, which implements the normal way of looking for object attributes. This field is inherited by subtypes together with :attr:`tp_getattr`: a subtype @@ -386,12 +386,12 @@ type objects) *must* have the :attr:`ob_size` field. the subtype's :attr:`tp_getattr` and :attr:`tp_getattro` are both *NULL*. -.. cmember:: setattrofunc PyTypeObject.tp_setattro +.. c:member:: setattrofunc PyTypeObject.tp_setattro An optional pointer to the set-attribute function. - The signature is the same as for :cfunc:`PyObject_SetAttr`. It is usually - convenient to set this field to :cfunc:`PyObject_GenericSetAttr`, which + The signature is the same as for :c:func:`PyObject_SetAttr`. It is usually + convenient to set this field to :c:func:`PyObject_GenericSetAttr`, which implements the normal way of setting object attributes. This field is inherited by subtypes together with :attr:`tp_setattr`: a subtype @@ -399,7 +399,7 @@ type objects) *must* have the :attr:`ob_size` field. the subtype's :attr:`tp_setattr` and :attr:`tp_setattro` are both *NULL*. -.. cmember:: PyBufferProcs* PyTypeObject.tp_as_buffer +.. c:member:: PyBufferProcs* PyTypeObject.tp_as_buffer Pointer to an additional structure that contains fields relevant only to objects which implement the buffer interface. These fields are documented in @@ -409,7 +409,7 @@ type objects) *must* have the :attr:`ob_size` field. inherited individually. -.. cmember:: long PyTypeObject.tp_flags +.. c:member:: long PyTypeObject.tp_flags This field is a bit mask of various flags. Some flags indicate variant semantics for certain situations; others are used to indicate that certain @@ -433,19 +433,19 @@ type objects) *must* have the :attr:`ob_size` field. The following bit masks are currently defined; these can be ORed together using the ``|`` operator to form the value of the :attr:`tp_flags` field. The macro - :cfunc:`PyType_HasFeature` takes a type and a flags value, *tp* and *f*, and + :c:func:`PyType_HasFeature` takes a type and a flags value, *tp* and *f*, and checks whether ``tp->tp_flags & f`` is non-zero. .. data:: Py_TPFLAGS_HAVE_GETCHARBUFFER - If this bit is set, the :ctype:`PyBufferProcs` struct referenced by + If this bit is set, the :c:type:`PyBufferProcs` struct referenced by :attr:`tp_as_buffer` has the :attr:`bf_getcharbuffer` field. .. data:: Py_TPFLAGS_HAVE_SEQUENCE_IN - If this bit is set, the :ctype:`PySequenceMethods` struct referenced by + If this bit is set, the :c:type:`PySequenceMethods` struct referenced by :attr:`tp_as_sequence` has the :attr:`sq_contains` field. @@ -457,23 +457,23 @@ type objects) *must* have the :attr:`ob_size` field. .. data:: Py_TPFLAGS_HAVE_INPLACEOPS - If this bit is set, the :ctype:`PySequenceMethods` struct referenced by - :attr:`tp_as_sequence` and the :ctype:`PyNumberMethods` structure referenced by + If this bit is set, the :c:type:`PySequenceMethods` struct referenced by + :attr:`tp_as_sequence` and the :c:type:`PyNumberMethods` structure referenced by :attr:`tp_as_number` contain the fields for in-place operators. In particular, - this means that the :ctype:`PyNumberMethods` structure has the fields + this means that the :c:type:`PyNumberMethods` structure has the fields :attr:`nb_inplace_add`, :attr:`nb_inplace_subtract`, :attr:`nb_inplace_multiply`, :attr:`nb_inplace_divide`, :attr:`nb_inplace_remainder`, :attr:`nb_inplace_power`, :attr:`nb_inplace_lshift`, :attr:`nb_inplace_rshift`, :attr:`nb_inplace_and`, :attr:`nb_inplace_xor`, and :attr:`nb_inplace_or`; and the - :ctype:`PySequenceMethods` struct has the fields :attr:`sq_inplace_concat` and + :c:type:`PySequenceMethods` struct has the fields :attr:`sq_inplace_concat` and :attr:`sq_inplace_repeat`. .. data:: Py_TPFLAGS_CHECKTYPES If this bit is set, the binary and ternary operations in the - :ctype:`PyNumberMethods` structure referenced by :attr:`tp_as_number` accept + :c:type:`PyNumberMethods` structure referenced by :attr:`tp_as_number` accept arguments of arbitrary object types, and do their own type conversions if needed. If this bit is clear, those operations require that all arguments have the current type as their type, and the caller is supposed to perform a coercion @@ -532,20 +532,20 @@ type objects) *must* have the :attr:`ob_size` field. .. data:: Py_TPFLAGS_READY This bit is set when the type object has been fully initialized by - :cfunc:`PyType_Ready`. + :c:func:`PyType_Ready`. .. data:: Py_TPFLAGS_READYING - This bit is set while :cfunc:`PyType_Ready` is in the process of initializing + This bit is set while :c:func:`PyType_Ready` is in the process of initializing the type object. .. data:: Py_TPFLAGS_HAVE_GC This bit is set when the object supports garbage collection. If this bit - is set, instances must be created using :cfunc:`PyObject_GC_New` and - destroyed using :cfunc:`PyObject_GC_Del`. More information in section + is set, instances must be created using :c:func:`PyObject_GC_New` and + destroyed using :c:func:`PyObject_GC_Del`. More information in section :ref:`supporting-cycle-detection`. This bit also implies that the GC-related fields :attr:`tp_traverse` and :attr:`tp_clear` are present in the type object; but those fields also exist when @@ -563,7 +563,7 @@ type objects) *must* have the :attr:`ob_size` field. :const:`Py_TPFLAGS_HAVE_ITER`, and :const:`Py_TPFLAGS_HAVE_CLASS`. -.. cmember:: char* PyTypeObject.tp_doc +.. c:member:: char* PyTypeObject.tp_doc An optional pointer to a NUL-terminated C string giving the docstring for this type object. This is exposed as the :attr:`__doc__` attribute on the type and @@ -575,7 +575,7 @@ The following three fields only exist if the :const:`Py_TPFLAGS_HAVE_RICHCOMPARE` flag bit is set. -.. cmember:: traverseproc PyTypeObject.tp_traverse +.. c:member:: traverseproc PyTypeObject.tp_traverse An optional pointer to a traversal function for the garbage collector. This is only used if the :const:`Py_TPFLAGS_HAVE_GC` flag bit is set. More information @@ -584,8 +584,8 @@ The following three fields only exist if the The :attr:`tp_traverse` pointer is used by the garbage collector to detect reference cycles. A typical implementation of a :attr:`tp_traverse` function - simply calls :cfunc:`Py_VISIT` on each of the instance's members that are Python - objects. For example, this is function :cfunc:`local_traverse` from the + simply calls :c:func:`Py_VISIT` on each of the instance's members that are Python + objects. For example, this is function :c:func:`local_traverse` from the :mod:`thread` extension module:: static int @@ -597,7 +597,7 @@ The following three fields only exist if the return 0; } - Note that :cfunc:`Py_VISIT` is called only on those members that can participate + Note that :c:func:`Py_VISIT` is called only on those members that can participate in reference cycles. Although there is also a ``self->key`` member, it can only be *NULL* or a Python string and therefore cannot be part of a reference cycle. @@ -605,8 +605,8 @@ The following three fields only exist if the debugging aid you may want to visit it anyway just so the :mod:`gc` module's :func:`get_referents` function will include it. - Note that :cfunc:`Py_VISIT` requires the *visit* and *arg* parameters to - :cfunc:`local_traverse` to have these specific names; don't name them just + Note that :c:func:`Py_VISIT` requires the *visit* and *arg* parameters to + :c:func:`local_traverse` to have these specific names; don't name them just anything. This field is inherited by subtypes together with :attr:`tp_clear` and the @@ -616,7 +616,7 @@ The following three fields only exist if the bit set. -.. cmember:: inquiry PyTypeObject.tp_clear +.. c:member:: inquiry PyTypeObject.tp_clear An optional pointer to a clear function for the garbage collector. This is only used if the :const:`Py_TPFLAGS_HAVE_GC` flag bit is set. @@ -645,7 +645,7 @@ The following three fields only exist if the return 0; } - The :cfunc:`Py_CLEAR` macro should be used, because clearing references is + The :c:func:`Py_CLEAR` macro should be used, because clearing references is delicate: the reference to the contained object must not be decremented until after the pointer to the contained object is set to *NULL*. This is because decrementing the reference count may cause the contained object to become trash, @@ -654,7 +654,7 @@ The following three fields only exist if the contained object). If it's possible for such code to reference *self* again, it's important that the pointer to the contained object be *NULL* at that time, so that *self* knows the contained object can no longer be used. The - :cfunc:`Py_CLEAR` macro performs the operations in a safe order. + :c:func:`Py_CLEAR` macro performs the operations in a safe order. Because the goal of :attr:`tp_clear` functions is to break reference cycles, it's not necessary to clear contained objects like Python strings or Python @@ -672,7 +672,7 @@ The following three fields only exist if the bit set. -.. cmember:: richcmpfunc PyTypeObject.tp_richcompare +.. c:member:: richcmpfunc PyTypeObject.tp_richcompare An optional pointer to the rich comparison function, whose signature is ``PyObject *tp_richcompare(PyObject *a, PyObject *b, int op)``. @@ -694,7 +694,7 @@ The following three fields only exist if the :attr:`tp_compare`, :attr:`tp_richcompare`, and :attr:`tp_hash` are all *NULL*. The following constants are defined to be used as the third argument for - :attr:`tp_richcompare` and for :cfunc:`PyObject_RichCompare`: + :attr:`tp_richcompare` and for :c:func:`PyObject_RichCompare`: +----------------+------------+ | Constant | Comparison | @@ -716,13 +716,13 @@ The following three fields only exist if the The next field only exists if the :const:`Py_TPFLAGS_HAVE_WEAKREFS` flag bit is set. -.. cmember:: long PyTypeObject.tp_weaklistoffset +.. c:member:: long PyTypeObject.tp_weaklistoffset If the instances of this type are weakly referenceable, this field is greater than zero and contains the offset in the instance structure of the weak reference list head (ignoring the GC header, if present); this offset is used by - :cfunc:`PyObject_ClearWeakRefs` and the :cfunc:`PyWeakref_\*` functions. The - instance structure needs to include a field of type :ctype:`PyObject\*` which is + :c:func:`PyObject_ClearWeakRefs` and the :c:func:`PyWeakref_\*` functions. The + instance structure needs to include a field of type :c:type:`PyObject\*` which is initialized to *NULL*. Do not confuse this field with :attr:`tp_weaklist`; that is the list head for @@ -751,19 +751,19 @@ The next two fields only exist if the :const:`Py_TPFLAGS_HAVE_ITER` flag bit is set. -.. cmember:: getiterfunc PyTypeObject.tp_iter +.. c:member:: getiterfunc PyTypeObject.tp_iter An optional pointer to a function that returns an iterator for the object. Its presence normally signals that the instances of this type are iterable (although sequences may be iterable without this function, and classic instances always have this function, even if they don't define an :meth:`__iter__` method). - This function has the same signature as :cfunc:`PyObject_GetIter`. + This function has the same signature as :c:func:`PyObject_GetIter`. This field is inherited by subtypes. -.. cmember:: iternextfunc PyTypeObject.tp_iternext +.. c:member:: iternextfunc PyTypeObject.tp_iternext An optional pointer to a function that returns the next item in an iterator. When the iterator is exhausted, it must return *NULL*; a :exc:`StopIteration` @@ -776,7 +776,7 @@ set. function should return the iterator instance itself (not a new iterator instance). - This function has the same signature as :cfunc:`PyIter_Next`. + This function has the same signature as :c:func:`PyIter_Next`. This field is inherited by subtypes. @@ -784,9 +784,9 @@ The next fields, up to and including :attr:`tp_weaklist`, only exist if the :const:`Py_TPFLAGS_HAVE_CLASS` flag bit is set. -.. cmember:: struct PyMethodDef* PyTypeObject.tp_methods +.. c:member:: struct PyMethodDef* PyTypeObject.tp_methods - An optional pointer to a static *NULL*-terminated array of :ctype:`PyMethodDef` + An optional pointer to a static *NULL*-terminated array of :c:type:`PyMethodDef` structures, declaring regular methods of this type. For each entry in the array, an entry is added to the type's dictionary (see @@ -796,9 +796,9 @@ The next fields, up to and including :attr:`tp_weaklist`, only exist if the different mechanism). -.. cmember:: struct PyMemberDef* PyTypeObject.tp_members +.. c:member:: struct PyMemberDef* PyTypeObject.tp_members - An optional pointer to a static *NULL*-terminated array of :ctype:`PyMemberDef` + An optional pointer to a static *NULL*-terminated array of :c:type:`PyMemberDef` structures, declaring regular data members (fields or slots) of instances of this type. @@ -809,9 +809,9 @@ The next fields, up to and including :attr:`tp_weaklist`, only exist if the different mechanism). -.. cmember:: struct PyGetSetDef* PyTypeObject.tp_getset +.. c:member:: struct PyGetSetDef* PyTypeObject.tp_getset - An optional pointer to a static *NULL*-terminated array of :ctype:`PyGetSetDef` + An optional pointer to a static *NULL*-terminated array of :c:type:`PyGetSetDef` structures, declaring computed attributes of instances of this type. For each entry in the array, an entry is added to the type's dictionary (see @@ -836,7 +836,7 @@ The next fields, up to and including :attr:`tp_weaklist`, only exist if the } PyGetSetDef; -.. cmember:: PyTypeObject* PyTypeObject.tp_base +.. c:member:: PyTypeObject* PyTypeObject.tp_base An optional pointer to a base type from which type properties are inherited. At this level, only single inheritance is supported; multiple inheritance require @@ -847,13 +847,13 @@ The next fields, up to and including :attr:`tp_weaklist`, only exist if the :class:`object`). -.. cmember:: PyObject* PyTypeObject.tp_dict +.. c:member:: PyObject* PyTypeObject.tp_dict - The type's dictionary is stored here by :cfunc:`PyType_Ready`. + The type's dictionary is stored here by :c:func:`PyType_Ready`. This field should normally be initialized to *NULL* before PyType_Ready is called; it may also be initialized to a dictionary containing initial attributes - for the type. Once :cfunc:`PyType_Ready` has initialized the type, extra + for the type. Once :c:func:`PyType_Ready` has initialized the type, extra attributes for the type may be added to this dictionary only if they don't correspond to overloaded operations (like :meth:`__add__`). @@ -861,7 +861,7 @@ The next fields, up to and including :attr:`tp_weaklist`, only exist if the are inherited through a different mechanism). -.. cmember:: descrgetfunc PyTypeObject.tp_descr_get +.. c:member:: descrgetfunc PyTypeObject.tp_descr_get An optional pointer to a "descriptor get" function. @@ -874,7 +874,7 @@ The next fields, up to and including :attr:`tp_weaklist`, only exist if the This field is inherited by subtypes. -.. cmember:: descrsetfunc PyTypeObject.tp_descr_set +.. c:member:: descrsetfunc PyTypeObject.tp_descr_set An optional pointer to a "descriptor set" function. @@ -887,12 +887,12 @@ The next fields, up to and including :attr:`tp_weaklist`, only exist if the .. XXX explain. -.. cmember:: long PyTypeObject.tp_dictoffset +.. c:member:: long PyTypeObject.tp_dictoffset If the instances of this type have a dictionary containing instance variables, this field is non-zero and contains the offset in the instances of the type of the instance variable dictionary; this offset is used by - :cfunc:`PyObject_GenericGetAttr`. + :c:func:`PyObject_GenericGetAttr`. Do not confuse this field with :attr:`tp_dict`; that is the dictionary for attributes of the type object itself. @@ -920,7 +920,7 @@ The next fields, up to and including :attr:`tp_weaklist`, only exist if the taken from the type object, and :attr:`ob_size` is taken from the instance. The absolute value is taken because long ints use the sign of :attr:`ob_size` to store the sign of the number. (There's never a need to do this calculation - yourself; it is done for you by :cfunc:`_PyObject_GetDictPtr`.) + yourself; it is done for you by :c:func:`_PyObject_GetDictPtr`.) This field is inherited by subtypes, but see the rules listed below. A subtype may override this offset; this means that the subtype instances store the @@ -940,7 +940,7 @@ The next fields, up to and including :attr:`tp_weaklist`, only exist if the added as a feature just like :attr:`__weakref__` though.) -.. cmember:: initproc PyTypeObject.tp_init +.. c:member:: initproc PyTypeObject.tp_init An optional pointer to an instance initialization function. @@ -970,7 +970,7 @@ The next fields, up to and including :attr:`tp_weaklist`, only exist if the This field is inherited by subtypes. -.. cmember:: allocfunc PyTypeObject.tp_alloc +.. c:member:: allocfunc PyTypeObject.tp_alloc An optional pointer to an instance allocation function. @@ -993,11 +993,11 @@ The next fields, up to and including :attr:`tp_weaklist`, only exist if the This field is inherited by static subtypes, but not by dynamic subtypes (subtypes created by a class statement); in the latter, this field is always set - to :cfunc:`PyType_GenericAlloc`, to force a standard heap allocation strategy. + to :c:func:`PyType_GenericAlloc`, to force a standard heap allocation strategy. That is also the recommended value for statically defined types. -.. cmember:: newfunc PyTypeObject.tp_new +.. c:member:: newfunc PyTypeObject.tp_new An optional pointer to an instance creation function. @@ -1029,16 +1029,16 @@ The next fields, up to and including :attr:`tp_weaklist`, only exist if the being linked with Python 2.2. -.. cmember:: destructor PyTypeObject.tp_free +.. c:member:: destructor PyTypeObject.tp_free An optional pointer to an instance deallocation function. The signature of this function has changed slightly: in Python 2.2 and 2.2.1, - its signature is :ctype:`destructor`:: + its signature is :c:type:`destructor`:: void tp_free(PyObject *) - In Python 2.3 and beyond, its signature is :ctype:`freefunc`:: + In Python 2.3 and beyond, its signature is :c:type:`freefunc`:: void tp_free(void *) @@ -1047,11 +1047,11 @@ The next fields, up to and including :attr:`tp_weaklist`, only exist if the This field is inherited by static subtypes, but not by dynamic subtypes (subtypes created by a class statement); in the latter, this field is set to a - deallocator suitable to match :cfunc:`PyType_GenericAlloc` and the value of the + deallocator suitable to match :c:func:`PyType_GenericAlloc` and the value of the :const:`Py_TPFLAGS_HAVE_GC` flag bit. -.. cmember:: inquiry PyTypeObject.tp_is_gc +.. c:member:: inquiry PyTypeObject.tp_is_gc An optional pointer to a function called by the garbage collector. @@ -1066,14 +1066,14 @@ The next fields, up to and including :attr:`tp_weaklist`, only exist if the int tp_is_gc(PyObject *self) (The only example of this are types themselves. The metatype, - :cdata:`PyType_Type`, defines this function to distinguish between statically + :c:data:`PyType_Type`, defines this function to distinguish between statically and dynamically allocated types.) This field is inherited by subtypes. (VERSION NOTE: in Python 2.2, it was not inherited. It is inherited in 2.2.1 and later versions.) -.. cmember:: PyObject* PyTypeObject.tp_bases +.. c:member:: PyObject* PyTypeObject.tp_bases Tuple of base types. @@ -1083,25 +1083,25 @@ The next fields, up to and including :attr:`tp_weaklist`, only exist if the This field is not inherited. -.. cmember:: PyObject* PyTypeObject.tp_mro +.. c:member:: PyObject* PyTypeObject.tp_mro Tuple containing the expanded set of base types, starting with the type itself and ending with :class:`object`, in Method Resolution Order. - This field is not inherited; it is calculated fresh by :cfunc:`PyType_Ready`. + This field is not inherited; it is calculated fresh by :c:func:`PyType_Ready`. -.. cmember:: PyObject* PyTypeObject.tp_cache +.. c:member:: PyObject* PyTypeObject.tp_cache Unused. Not inherited. Internal use only. -.. cmember:: PyObject* PyTypeObject.tp_subclasses +.. c:member:: PyObject* PyTypeObject.tp_subclasses List of weak references to subclasses. Not inherited. Internal use only. -.. cmember:: PyObject* PyTypeObject.tp_weaklist +.. c:member:: PyObject* PyTypeObject.tp_weaklist Weak reference list head, for weak references to this type object. Not inherited. Internal use only. @@ -1112,22 +1112,22 @@ documented here for completeness. None of these fields are inherited by subtypes. -.. cmember:: Py_ssize_t PyTypeObject.tp_allocs +.. c:member:: Py_ssize_t PyTypeObject.tp_allocs Number of allocations. -.. cmember:: Py_ssize_t PyTypeObject.tp_frees +.. c:member:: Py_ssize_t PyTypeObject.tp_frees Number of frees. -.. cmember:: Py_ssize_t PyTypeObject.tp_maxalloc +.. c:member:: Py_ssize_t PyTypeObject.tp_maxalloc Maximum simultaneously allocated objects. -.. cmember:: PyTypeObject* PyTypeObject.tp_next +.. c:member:: PyTypeObject* PyTypeObject.tp_next Pointer to the next type object with a non-zero :attr:`tp_allocs` field. @@ -1150,7 +1150,7 @@ Number Object Structures .. sectionauthor:: Amaury Forgeot d'Arc -.. ctype:: PyNumberMethods +.. c:type:: PyNumberMethods This structure holds pointers to the functions which an object uses to implement the number protocol. Almost every function below is used by the @@ -1215,9 +1215,9 @@ on the flag bit :const:`Py_TPFLAGS_CHECKTYPES`: the coercion method specified by the :attr:`nb_coerce` member to convert the arguments: - .. cmember:: coercion PyNumberMethods.nb_coerce + .. c:member:: coercion PyNumberMethods.nb_coerce - This function is used by :cfunc:`PyNumber_CoerceEx` and has the same + This function is used by :c:func:`PyNumber_CoerceEx` and has the same signature. The first argument is always a pointer to an object of the defined type. If the conversion to a common "larger" type is possible, the function replaces the pointers with new references to the converted objects @@ -1243,26 +1243,26 @@ Mapping Object Structures .. sectionauthor:: Amaury Forgeot d'Arc -.. ctype:: PyMappingMethods +.. c:type:: PyMappingMethods This structure holds pointers to the functions which an object uses to implement the mapping protocol. It has three members: -.. cmember:: lenfunc PyMappingMethods.mp_length +.. c:member:: lenfunc PyMappingMethods.mp_length - This function is used by :cfunc:`PyMapping_Length` and - :cfunc:`PyObject_Size`, and has the same signature. This slot may be set to + This function is used by :c:func:`PyMapping_Length` and + :c:func:`PyObject_Size`, and has the same signature. This slot may be set to *NULL* if the object has no defined length. -.. cmember:: binaryfunc PyMappingMethods.mp_subscript +.. c:member:: binaryfunc PyMappingMethods.mp_subscript - This function is used by :cfunc:`PyObject_GetItem` and has the same - signature. This slot must be filled for the :cfunc:`PyMapping_Check` + This function is used by :c:func:`PyObject_GetItem` and has the same + signature. This slot must be filled for the :c:func:`PyMapping_Check` function to return ``1``, it can be *NULL* otherwise. -.. cmember:: objobjargproc PyMappingMethods.mp_ass_subscript +.. c:member:: objobjargproc PyMappingMethods.mp_ass_subscript - This function is used by :cfunc:`PyObject_SetItem` and has the same + This function is used by :c:func:`PyObject_SetItem` and has the same signature. If this slot is *NULL*, the object does not support item assignment. @@ -1275,32 +1275,32 @@ Sequence Object Structures .. sectionauthor:: Amaury Forgeot d'Arc -.. ctype:: PySequenceMethods +.. c:type:: PySequenceMethods This structure holds pointers to the functions which an object uses to implement the sequence protocol. -.. cmember:: lenfunc PySequenceMethods.sq_length +.. c:member:: lenfunc PySequenceMethods.sq_length - This function is used by :cfunc:`PySequence_Size` and :cfunc:`PyObject_Size`, + This function is used by :c:func:`PySequence_Size` and :c:func:`PyObject_Size`, and has the same signature. -.. cmember:: binaryfunc PySequenceMethods.sq_concat +.. c:member:: binaryfunc PySequenceMethods.sq_concat - This function is used by :cfunc:`PySequence_Concat` and has the same + This function is used by :c:func:`PySequence_Concat` and has the same signature. It is also used by the ``+`` operator, after trying the numeric addition via the :attr:`tp_as_number.nb_add` slot. -.. cmember:: ssizeargfunc PySequenceMethods.sq_repeat +.. c:member:: ssizeargfunc PySequenceMethods.sq_repeat - This function is used by :cfunc:`PySequence_Repeat` and has the same + This function is used by :c:func:`PySequence_Repeat` and has the same signature. It is also used by the ``*`` operator, after trying numeric multiplication via the :attr:`tp_as_number.nb_mul` slot. -.. cmember:: ssizeargfunc PySequenceMethods.sq_item +.. c:member:: ssizeargfunc PySequenceMethods.sq_item - This function is used by :cfunc:`PySequence_GetItem` and has the same - signature. This slot must be filled for the :cfunc:`PySequence_Check` + This function is used by :c:func:`PySequence_GetItem` and has the same + signature. This slot must be filled for the :c:func:`PySequence_Check` function to return ``1``, it can be *NULL* otherwise. Negative indexes are handled as follows: if the :attr:`sq_length` slot is @@ -1308,27 +1308,27 @@ Sequence Object Structures index which is passed to :attr:`sq_item`. If :attr:`sq_length` is *NULL*, the index is passed as is to the function. -.. cmember:: ssizeobjargproc PySequenceMethods.sq_ass_item +.. c:member:: ssizeobjargproc PySequenceMethods.sq_ass_item - This function is used by :cfunc:`PySequence_SetItem` and has the same + This function is used by :c:func:`PySequence_SetItem` and has the same signature. This slot may be left to *NULL* if the object does not support item assignment. -.. cmember:: objobjproc PySequenceMethods.sq_contains +.. c:member:: objobjproc PySequenceMethods.sq_contains - This function may be used by :cfunc:`PySequence_Contains` and has the same + This function may be used by :c:func:`PySequence_Contains` and has the same signature. This slot may be left to *NULL*, in this case - :cfunc:`PySequence_Contains` simply traverses the sequence until it finds a + :c:func:`PySequence_Contains` simply traverses the sequence until it finds a match. -.. cmember:: binaryfunc PySequenceMethods.sq_inplace_concat +.. c:member:: binaryfunc PySequenceMethods.sq_inplace_concat - This function is used by :cfunc:`PySequence_InPlaceConcat` and has the same + This function is used by :c:func:`PySequence_InPlaceConcat` and has the same signature. It should modify its first operand, and return it. -.. cmember:: ssizeargfunc PySequenceMethods.sq_inplace_repeat +.. c:member:: ssizeargfunc PySequenceMethods.sq_inplace_repeat - This function is used by :cfunc:`PySequence_InPlaceRepeat` and has the same + This function is used by :c:func:`PySequence_InPlaceRepeat` and has the same signature. It should modify its first operand, and return it. .. XXX need to explain precedence between mapping and sequence @@ -1349,45 +1349,45 @@ pointer/length pair. These chunks are called :dfn:`segments` and are presumed to be non-contiguous in memory. If an object does not export the buffer interface, then its :attr:`tp_as_buffer` -member in the :ctype:`PyTypeObject` structure should be *NULL*. Otherwise, the -:attr:`tp_as_buffer` will point to a :ctype:`PyBufferProcs` structure. +member in the :c:type:`PyTypeObject` structure should be *NULL*. Otherwise, the +:attr:`tp_as_buffer` will point to a :c:type:`PyBufferProcs` structure. .. note:: - It is very important that your :ctype:`PyTypeObject` structure uses + It is very important that your :c:type:`PyTypeObject` structure uses :const:`Py_TPFLAGS_DEFAULT` for the value of the :attr:`tp_flags` member rather - than ``0``. This tells the Python runtime that your :ctype:`PyBufferProcs` + than ``0``. This tells the Python runtime that your :c:type:`PyBufferProcs` structure contains the :attr:`bf_getcharbuffer` slot. Older versions of Python did not have this member, so a new Python interpreter using an old extension needs to be able to test for its presence before using it. -.. ctype:: PyBufferProcs +.. c:type:: PyBufferProcs Structure used to hold the function pointers which define an implementation of the buffer protocol. - The first slot is :attr:`bf_getreadbuffer`, of type :ctype:`getreadbufferproc`. + The first slot is :attr:`bf_getreadbuffer`, of type :c:type:`getreadbufferproc`. If this slot is *NULL*, then the object does not support reading from the internal data. This is non-sensical, so implementors should fill this in, but callers should test that the slot contains a non-*NULL* value. The next slot is :attr:`bf_getwritebuffer` having type - :ctype:`getwritebufferproc`. This slot may be *NULL* if the object does not + :c:type:`getwritebufferproc`. This slot may be *NULL* if the object does not allow writing into its returned buffers. - The third slot is :attr:`bf_getsegcount`, with type :ctype:`getsegcountproc`. + The third slot is :attr:`bf_getsegcount`, with type :c:type:`getsegcountproc`. This slot must not be *NULL* and is used to inform the caller how many segments - the object contains. Simple objects such as :ctype:`PyString_Type` and - :ctype:`PyBuffer_Type` objects contain a single segment. + the object contains. Simple objects such as :c:type:`PyString_Type` and + :c:type:`PyBuffer_Type` objects contain a single segment. .. index:: single: PyType_HasFeature() - The last slot is :attr:`bf_getcharbuffer`, of type :ctype:`getcharbufferproc`. + The last slot is :attr:`bf_getcharbuffer`, of type :c:type:`getcharbufferproc`. This slot will only be present if the :const:`Py_TPFLAGS_HAVE_GETCHARBUFFER` flag is present in the :attr:`tp_flags` field of the object's - :ctype:`PyTypeObject`. Before using this slot, the caller should test whether it - is present by using the :cfunc:`PyType_HasFeature` function. If the flag is + :c:type:`PyTypeObject`. Before using this slot, the caller should test whether it + is present by using the :c:func:`PyType_HasFeature` function. If the flag is present, :attr:`bf_getcharbuffer` may be *NULL*, indicating that the object's contents cannot be used as *8-bit characters*. The slot function may also raise an error if the object's contents cannot be interpreted as 8-bit characters. @@ -1411,7 +1411,7 @@ member in the :ctype:`PyTypeObject` structure should be *NULL*. Otherwise, the buffer interface or that the :attr:`bf_getcharbuffer` slot is non-*NULL*. -.. ctype:: Py_ssize_t (*readbufferproc) (PyObject *self, Py_ssize_t segment, void **ptrptr) +.. c:type:: Py_ssize_t (*readbufferproc) (PyObject *self, Py_ssize_t segment, void **ptrptr) Return a pointer to a readable segment of the buffer in ``*ptrptr``. This function is allowed to raise an exception, in which case it must return ``-1``. @@ -1421,7 +1421,7 @@ member in the :ctype:`PyTypeObject` structure should be *NULL*. Otherwise, the ``*ptrptr`` to a pointer to that memory. -.. ctype:: Py_ssize_t (*writebufferproc) (PyObject *self, Py_ssize_t segment, void **ptrptr) +.. c:type:: Py_ssize_t (*writebufferproc) (PyObject *self, Py_ssize_t segment, void **ptrptr) Return a pointer to a writable memory buffer in ``*ptrptr``, and the length of that segment as the function return value. The memory buffer must correspond to @@ -1435,14 +1435,14 @@ member in the :ctype:`PyTypeObject` structure should be *NULL*. Otherwise, the segment. That indicates a blatant programming error in the C code. -.. ctype:: Py_ssize_t (*segcountproc) (PyObject *self, Py_ssize_t *lenp) +.. c:type:: Py_ssize_t (*segcountproc) (PyObject *self, Py_ssize_t *lenp) Return the number of memory segments which comprise the buffer. If *lenp* is not *NULL*, the implementation must report the sum of the sizes (in bytes) of all segments in ``*lenp``. The function cannot fail. -.. ctype:: Py_ssize_t (*charbufferproc) (PyObject *self, Py_ssize_t segment, const char **ptrptr) +.. c:type:: Py_ssize_t (*charbufferproc) (PyObject *self, Py_ssize_t segment, const char **ptrptr) Return the size of the segment *segment* that *ptrptr* is set to. ``*ptrptr`` is set to the memory buffer. Returns ``-1`` on error. diff --git a/Doc/c-api/unicode.rst b/Doc/c-api/unicode.rst index 8308304..73f6fe6 100644 --- a/Doc/c-api/unicode.rst +++ b/Doc/c-api/unicode.rst @@ -18,39 +18,39 @@ These are the basic Unicode object types used for the Unicode implementation in Python: -.. ctype:: Py_UNICODE +.. c:type:: Py_UNICODE This type represents the storage type which is used by Python internally as basis for holding Unicode ordinals. Python's default builds use a 16-bit type - for :ctype:`Py_UNICODE` and store Unicode values internally as UCS2. It is also + for :c:type:`Py_UNICODE` and store Unicode values internally as UCS2. It is also possible to build a UCS4 version of Python (most recent Linux distributions come with UCS4 builds of Python). These builds then use a 32-bit type for - :ctype:`Py_UNICODE` and store Unicode data internally as UCS4. On platforms - where :ctype:`wchar_t` is available and compatible with the chosen Python - Unicode build variant, :ctype:`Py_UNICODE` is a typedef alias for - :ctype:`wchar_t` to enhance native platform compatibility. On all other - platforms, :ctype:`Py_UNICODE` is a typedef alias for either :ctype:`unsigned - short` (UCS2) or :ctype:`unsigned long` (UCS4). + :c:type:`Py_UNICODE` and store Unicode data internally as UCS4. On platforms + where :c:type:`wchar_t` is available and compatible with the chosen Python + Unicode build variant, :c:type:`Py_UNICODE` is a typedef alias for + :c:type:`wchar_t` to enhance native platform compatibility. On all other + platforms, :c:type:`Py_UNICODE` is a typedef alias for either :c:type:`unsigned + short` (UCS2) or :c:type:`unsigned long` (UCS4). Note that UCS2 and UCS4 Python builds are not binary compatible. Please keep this in mind when writing extensions or interfaces. -.. ctype:: PyUnicodeObject +.. c:type:: PyUnicodeObject - This subtype of :ctype:`PyObject` represents a Python Unicode object. + This subtype of :c:type:`PyObject` represents a Python Unicode object. -.. cvar:: PyTypeObject PyUnicode_Type +.. c:var:: PyTypeObject PyUnicode_Type - This instance of :ctype:`PyTypeObject` represents the Python Unicode type. It + This instance of :c:type:`PyTypeObject` represents the Python Unicode type. It is exposed to Python code as ``unicode`` and ``types.UnicodeType``. The following APIs are really C macros and can be used to do fast checks and to access internal read-only data of Unicode objects: -.. cfunction:: int PyUnicode_Check(PyObject *o) +.. c:function:: int PyUnicode_Check(PyObject *o) Return true if the object *o* is a Unicode object or an instance of a Unicode subtype. @@ -59,7 +59,7 @@ access internal read-only data of Unicode objects: Allowed subtypes to be accepted. -.. cfunction:: int PyUnicode_CheckExact(PyObject *o) +.. c:function:: int PyUnicode_CheckExact(PyObject *o) Return true if the object *o* is a Unicode object, but not an instance of a subtype. @@ -67,39 +67,39 @@ access internal read-only data of Unicode objects: .. versionadded:: 2.2 -.. cfunction:: Py_ssize_t PyUnicode_GET_SIZE(PyObject *o) +.. c:function:: Py_ssize_t PyUnicode_GET_SIZE(PyObject *o) - Return the size of the object. *o* has to be a :ctype:`PyUnicodeObject` (not + Return the size of the object. *o* has to be a :c:type:`PyUnicodeObject` (not checked). .. versionchanged:: 2.5 - This function returned an :ctype:`int` type. This might require changes + This function returned an :c:type:`int` type. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: Py_ssize_t PyUnicode_GET_DATA_SIZE(PyObject *o) +.. c:function:: Py_ssize_t PyUnicode_GET_DATA_SIZE(PyObject *o) Return the size of the object's internal buffer in bytes. *o* has to be a - :ctype:`PyUnicodeObject` (not checked). + :c:type:`PyUnicodeObject` (not checked). .. versionchanged:: 2.5 - This function returned an :ctype:`int` type. This might require changes + This function returned an :c:type:`int` type. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: Py_UNICODE* PyUnicode_AS_UNICODE(PyObject *o) +.. c:function:: Py_UNICODE* PyUnicode_AS_UNICODE(PyObject *o) - Return a pointer to the internal :ctype:`Py_UNICODE` buffer of the object. *o* - has to be a :ctype:`PyUnicodeObject` (not checked). + Return a pointer to the internal :c:type:`Py_UNICODE` buffer of the object. *o* + has to be a :c:type:`PyUnicodeObject` (not checked). -.. cfunction:: const char* PyUnicode_AS_DATA(PyObject *o) +.. c:function:: const char* PyUnicode_AS_DATA(PyObject *o) Return a pointer to the internal buffer of the object. *o* has to be a - :ctype:`PyUnicodeObject` (not checked). + :c:type:`PyUnicodeObject` (not checked). -.. cfunction:: int PyUnicode_ClearFreeList() +.. c:function:: int PyUnicode_ClearFreeList() Clear the free list. Return the total number of freed items. @@ -114,86 +114,86 @@ are available through these macros which are mapped to C functions depending on the Python configuration. -.. cfunction:: int Py_UNICODE_ISSPACE(Py_UNICODE ch) +.. c:function:: int Py_UNICODE_ISSPACE(Py_UNICODE ch) Return 1 or 0 depending on whether *ch* is a whitespace character. -.. cfunction:: int Py_UNICODE_ISLOWER(Py_UNICODE ch) +.. c:function:: int Py_UNICODE_ISLOWER(Py_UNICODE ch) Return 1 or 0 depending on whether *ch* is a lowercase character. -.. cfunction:: int Py_UNICODE_ISUPPER(Py_UNICODE ch) +.. c:function:: int Py_UNICODE_ISUPPER(Py_UNICODE ch) Return 1 or 0 depending on whether *ch* is an uppercase character. -.. cfunction:: int Py_UNICODE_ISTITLE(Py_UNICODE ch) +.. c:function:: int Py_UNICODE_ISTITLE(Py_UNICODE ch) Return 1 or 0 depending on whether *ch* is a titlecase character. -.. cfunction:: int Py_UNICODE_ISLINEBREAK(Py_UNICODE ch) +.. c:function:: int Py_UNICODE_ISLINEBREAK(Py_UNICODE ch) Return 1 or 0 depending on whether *ch* is a linebreak character. -.. cfunction:: int Py_UNICODE_ISDECIMAL(Py_UNICODE ch) +.. c:function:: int Py_UNICODE_ISDECIMAL(Py_UNICODE ch) Return 1 or 0 depending on whether *ch* is a decimal character. -.. cfunction:: int Py_UNICODE_ISDIGIT(Py_UNICODE ch) +.. c:function:: int Py_UNICODE_ISDIGIT(Py_UNICODE ch) Return 1 or 0 depending on whether *ch* is a digit character. -.. cfunction:: int Py_UNICODE_ISNUMERIC(Py_UNICODE ch) +.. c:function:: int Py_UNICODE_ISNUMERIC(Py_UNICODE ch) Return 1 or 0 depending on whether *ch* is a numeric character. -.. cfunction:: int Py_UNICODE_ISALPHA(Py_UNICODE ch) +.. c:function:: int Py_UNICODE_ISALPHA(Py_UNICODE ch) Return 1 or 0 depending on whether *ch* is an alphabetic character. -.. cfunction:: int Py_UNICODE_ISALNUM(Py_UNICODE ch) +.. c:function:: int Py_UNICODE_ISALNUM(Py_UNICODE ch) Return 1 or 0 depending on whether *ch* is an alphanumeric character. These APIs can be used for fast direct character conversions: -.. cfunction:: Py_UNICODE Py_UNICODE_TOLOWER(Py_UNICODE ch) +.. c:function:: Py_UNICODE Py_UNICODE_TOLOWER(Py_UNICODE ch) Return the character *ch* converted to lower case. -.. cfunction:: Py_UNICODE Py_UNICODE_TOUPPER(Py_UNICODE ch) +.. c:function:: Py_UNICODE Py_UNICODE_TOUPPER(Py_UNICODE ch) Return the character *ch* converted to upper case. -.. cfunction:: Py_UNICODE Py_UNICODE_TOTITLE(Py_UNICODE ch) +.. c:function:: Py_UNICODE Py_UNICODE_TOTITLE(Py_UNICODE ch) Return the character *ch* converted to title case. -.. cfunction:: int Py_UNICODE_TODECIMAL(Py_UNICODE ch) +.. c:function:: int Py_UNICODE_TODECIMAL(Py_UNICODE ch) Return the character *ch* converted to a decimal positive integer. Return ``-1`` if this is not possible. This macro does not raise exceptions. -.. cfunction:: int Py_UNICODE_TODIGIT(Py_UNICODE ch) +.. c:function:: int Py_UNICODE_TODIGIT(Py_UNICODE ch) Return the character *ch* converted to a single digit integer. Return ``-1`` if this is not possible. This macro does not raise exceptions. -.. cfunction:: double Py_UNICODE_TONUMERIC(Py_UNICODE ch) +.. c:function:: double Py_UNICODE_TONUMERIC(Py_UNICODE ch) Return the character *ch* converted to a double. Return ``-1.0`` if this is not possible. This macro does not raise exceptions. @@ -206,7 +206,7 @@ To create Unicode objects and access their basic sequence properties, use these APIs: -.. cfunction:: PyObject* PyUnicode_FromUnicode(const Py_UNICODE *u, Py_ssize_t size) +.. c:function:: PyObject* PyUnicode_FromUnicode(const Py_UNICODE *u, Py_ssize_t size) Create a Unicode object from the Py_UNICODE buffer *u* of the given size. *u* may be *NULL* which causes the contents to be undefined. It is the user's @@ -216,11 +216,11 @@ APIs: is *NULL*. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *size*. This might require + This function used an :c:type:`int` type for *size*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: PyObject* PyUnicode_FromStringAndSize(const char *u, Py_ssize_t size) +.. c:function:: PyObject* PyUnicode_FromStringAndSize(const char *u, Py_ssize_t size) Create a Unicode object from the char buffer *u*. The bytes will be interpreted as being UTF-8 encoded. *u* may also be *NULL* which @@ -232,7 +232,7 @@ APIs: .. versionadded:: 2.6 -.. cfunction:: PyObject *PyUnicode_FromString(const char *u) +.. c:function:: PyObject *PyUnicode_FromString(const char *u) Create a Unicode object from an UTF-8 encoded null-terminated char buffer *u*. @@ -240,9 +240,9 @@ APIs: .. versionadded:: 2.6 -.. cfunction:: PyObject* PyUnicode_FromFormat(const char *format, ...) +.. c:function:: PyObject* PyUnicode_FromFormat(const char *format, ...) - Take a C :cfunc:`printf`\ -style *format* string and a variable number of + Take a C :c:func:`printf`\ -style *format* string and a variable number of arguments, calculate the size of the resulting Python unicode string and return a string with the values formatted into it. The variable arguments must be C types and must correspond exactly to the format characters in the *format* @@ -317,7 +317,7 @@ APIs: .. versionadded:: 2.6 -.. cfunction:: PyObject* PyUnicode_FromFormatV(const char *format, va_list vargs) +.. c:function:: PyObject* PyUnicode_FromFormatV(const char *format, va_list vargs) Identical to :func:`PyUnicode_FromFormat` except that it takes exactly two arguments. @@ -325,25 +325,25 @@ APIs: .. versionadded:: 2.6 -.. cfunction:: Py_UNICODE* PyUnicode_AsUnicode(PyObject *unicode) +.. c:function:: Py_UNICODE* PyUnicode_AsUnicode(PyObject *unicode) Return a read-only pointer to the Unicode object's internal - :ctype:`Py_UNICODE` buffer, *NULL* if *unicode* is not a Unicode object. - Note that the resulting :ctype:`Py_UNICODE*` string may contain embedded + :c:type:`Py_UNICODE` buffer, *NULL* if *unicode* is not a Unicode object. + Note that the resulting :c:type:`Py_UNICODE*` string may contain embedded null characters, which would cause the string to be truncated when used in most C functions. -.. cfunction:: Py_ssize_t PyUnicode_GetSize(PyObject *unicode) +.. c:function:: Py_ssize_t PyUnicode_GetSize(PyObject *unicode) Return the length of the Unicode object. .. versionchanged:: 2.5 - This function returned an :ctype:`int` type. This might require changes + This function returned an :c:type:`int` type. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: PyObject* PyUnicode_FromEncodedObject(PyObject *obj, const char *encoding, const char *errors) +.. c:function:: PyObject* PyUnicode_FromEncodedObject(PyObject *obj, const char *encoding, const char *errors) Coerce an encoded object *obj* to an Unicode object and return a reference with incremented refcount. @@ -360,46 +360,46 @@ APIs: decref'ing the returned objects. -.. cfunction:: PyObject* PyUnicode_FromObject(PyObject *obj) +.. c:function:: PyObject* PyUnicode_FromObject(PyObject *obj) Shortcut for ``PyUnicode_FromEncodedObject(obj, NULL, "strict")`` which is used throughout the interpreter whenever coercion to Unicode is needed. -If the platform supports :ctype:`wchar_t` and provides a header file wchar.h, +If the platform supports :c:type:`wchar_t` and provides a header file wchar.h, Python can interface directly to this type using the following functions. -Support is optimized if Python's own :ctype:`Py_UNICODE` type is identical to -the system's :ctype:`wchar_t`. +Support is optimized if Python's own :c:type:`Py_UNICODE` type is identical to +the system's :c:type:`wchar_t`. wchar_t Support """"""""""""""" -:ctype:`wchar_t` support for platforms which support it: +:c:type:`wchar_t` support for platforms which support it: -.. cfunction:: PyObject* PyUnicode_FromWideChar(const wchar_t *w, Py_ssize_t size) +.. c:function:: PyObject* PyUnicode_FromWideChar(const wchar_t *w, Py_ssize_t size) - Create a Unicode object from the :ctype:`wchar_t` buffer *w* of the given *size*. + Create a Unicode object from the :c:type:`wchar_t` buffer *w* of the given *size*. Return *NULL* on failure. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *size*. This might require + This function used an :c:type:`int` type for *size*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: Py_ssize_t PyUnicode_AsWideChar(PyUnicodeObject *unicode, wchar_t *w, Py_ssize_t size) +.. c:function:: Py_ssize_t PyUnicode_AsWideChar(PyUnicodeObject *unicode, wchar_t *w, Py_ssize_t size) - Copy the Unicode object contents into the :ctype:`wchar_t` buffer *w*. At most - *size* :ctype:`wchar_t` characters are copied (excluding a possibly trailing - 0-termination character). Return the number of :ctype:`wchar_t` characters - copied or -1 in case of an error. Note that the resulting :ctype:`wchar_t` + Copy the Unicode object contents into the :c:type:`wchar_t` buffer *w*. At most + *size* :c:type:`wchar_t` characters are copied (excluding a possibly trailing + 0-termination character). Return the number of :c:type:`wchar_t` characters + copied or -1 in case of an error. Note that the resulting :c:type:`wchar_t` string may or may not be 0-terminated. It is the responsibility of the caller - to make sure that the :ctype:`wchar_t` string is 0-terminated in case this is - required by the application. Also, note that the :ctype:`wchar_t*` string + to make sure that the :c:type:`wchar_t` string is 0-terminated in case this is + required by the application. Also, note that the :c:type:`wchar_t*` string might contain null characters, which would cause the string to be truncated when used with most C functions. .. versionchanged:: 2.5 - This function returned an :ctype:`int` type and used an :ctype:`int` + This function returned an :c:type:`int` type and used an :c:type:`int` type for *size*. This might require changes in your code for properly supporting 64-bit systems. @@ -417,7 +417,7 @@ have the same semantics as the ones of the built-in :func:`unicode` Unicode object constructor. Setting encoding to *NULL* causes the default encoding to be used which is -ASCII. The file system calls should use :cdata:`Py_FileSystemDefaultEncoding` +ASCII. The file system calls should use :c:data:`Py_FileSystemDefaultEncoding` as the encoding for file names. This variable should be treated as read-only: on some systems, it will be a pointer to a static string, on others, it will change at run-time (such as when the application invokes setlocale). @@ -436,7 +436,7 @@ Generic Codecs These are the generic codec APIs: -.. cfunction:: PyObject* PyUnicode_Decode(const char *s, Py_ssize_t size, const char *encoding, const char *errors) +.. c:function:: PyObject* PyUnicode_Decode(const char *s, Py_ssize_t size, const char *encoding, const char *errors) Create a Unicode object by decoding *size* bytes of the encoded string *s*. *encoding* and *errors* have the same meaning as the parameters of the same name @@ -445,24 +445,24 @@ These are the generic codec APIs: the codec. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *size*. This might require + This function used an :c:type:`int` type for *size*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: PyObject* PyUnicode_Encode(const Py_UNICODE *s, Py_ssize_t size, const char *encoding, const char *errors) +.. c:function:: PyObject* PyUnicode_Encode(const Py_UNICODE *s, Py_ssize_t size, const char *encoding, const char *errors) - Encode the :ctype:`Py_UNICODE` buffer *s* of the given *size* and return a Python + Encode the :c:type:`Py_UNICODE` buffer *s* of the given *size* and return a Python string object. *encoding* and *errors* have the same meaning as the parameters of the same name in the Unicode :meth:`encode` method. The codec to be used is looked up using the Python codec registry. Return *NULL* if an exception was raised by the codec. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *size*. This might require + This function used an :c:type:`int` type for *size*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: PyObject* PyUnicode_AsEncodedString(PyObject *unicode, const char *encoding, const char *errors) +.. c:function:: PyObject* PyUnicode_AsEncodedString(PyObject *unicode, const char *encoding, const char *errors) Encode a Unicode object and return the result as Python string object. *encoding* and *errors* have the same meaning as the parameters of the same name @@ -477,19 +477,19 @@ UTF-8 Codecs These are the UTF-8 codec APIs: -.. cfunction:: PyObject* PyUnicode_DecodeUTF8(const char *s, Py_ssize_t size, const char *errors) +.. c:function:: PyObject* PyUnicode_DecodeUTF8(const char *s, Py_ssize_t size, const char *errors) Create a Unicode object by decoding *size* bytes of the UTF-8 encoded string *s*. Return *NULL* if an exception was raised by the codec. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *size*. This might require + This function used an :c:type:`int` type for *size*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: PyObject* PyUnicode_DecodeUTF8Stateful(const char *s, Py_ssize_t size, const char *errors, Py_ssize_t *consumed) +.. c:function:: PyObject* PyUnicode_DecodeUTF8Stateful(const char *s, Py_ssize_t size, const char *errors, Py_ssize_t *consumed) - If *consumed* is *NULL*, behave like :cfunc:`PyUnicode_DecodeUTF8`. If + If *consumed* is *NULL*, behave like :c:func:`PyUnicode_DecodeUTF8`. If *consumed* is not *NULL*, trailing incomplete UTF-8 byte sequences will not be treated as an error. Those bytes will not be decoded and the number of bytes that have been decoded will be stored in *consumed*. @@ -497,21 +497,21 @@ These are the UTF-8 codec APIs: .. versionadded:: 2.4 .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *size*. This might require + This function used an :c:type:`int` type for *size*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: PyObject* PyUnicode_EncodeUTF8(const Py_UNICODE *s, Py_ssize_t size, const char *errors) +.. c:function:: PyObject* PyUnicode_EncodeUTF8(const Py_UNICODE *s, Py_ssize_t size, const char *errors) - Encode the :ctype:`Py_UNICODE` buffer *s* of the given *size* using UTF-8 and return a + Encode the :c:type:`Py_UNICODE` buffer *s* of the given *size* using UTF-8 and return a Python string object. Return *NULL* if an exception was raised by the codec. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *size*. This might require + This function used an :c:type:`int` type for *size*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: PyObject* PyUnicode_AsUTF8String(PyObject *unicode) +.. c:function:: PyObject* PyUnicode_AsUTF8String(PyObject *unicode) Encode a Unicode object using UTF-8 and return the result as Python string object. Error handling is "strict". Return *NULL* if an exception was raised @@ -524,7 +524,7 @@ UTF-32 Codecs These are the UTF-32 codec APIs: -.. cfunction:: PyObject* PyUnicode_DecodeUTF32(const char *s, Py_ssize_t size, const char *errors, int *byteorder) +.. c:function:: PyObject* PyUnicode_DecodeUTF32(const char *s, Py_ssize_t size, const char *errors, int *byteorder) Decode *size* bytes from a UTF-32 encoded buffer string and return the corresponding Unicode object. *errors* (if non-*NULL*) defines the error @@ -554,10 +554,10 @@ These are the UTF-32 codec APIs: .. versionadded:: 2.6 -.. cfunction:: PyObject* PyUnicode_DecodeUTF32Stateful(const char *s, Py_ssize_t size, const char *errors, int *byteorder, Py_ssize_t *consumed) +.. c:function:: PyObject* PyUnicode_DecodeUTF32Stateful(const char *s, Py_ssize_t size, const char *errors, int *byteorder, Py_ssize_t *consumed) - If *consumed* is *NULL*, behave like :cfunc:`PyUnicode_DecodeUTF32`. If - *consumed* is not *NULL*, :cfunc:`PyUnicode_DecodeUTF32Stateful` will not treat + If *consumed* is *NULL*, behave like :c:func:`PyUnicode_DecodeUTF32`. If + *consumed* is not *NULL*, :c:func:`PyUnicode_DecodeUTF32Stateful` will not treat trailing incomplete UTF-32 byte sequences (such as a number of bytes not divisible by four) as an error. Those bytes will not be decoded and the number of bytes that have been decoded will be stored in *consumed*. @@ -565,7 +565,7 @@ These are the UTF-32 codec APIs: .. versionadded:: 2.6 -.. cfunction:: PyObject* PyUnicode_EncodeUTF32(const Py_UNICODE *s, Py_ssize_t size, const char *errors, int byteorder) +.. c:function:: PyObject* PyUnicode_EncodeUTF32(const Py_UNICODE *s, Py_ssize_t size, const char *errors, int byteorder) Return a Python bytes object holding the UTF-32 encoded value of the Unicode data in *s*. Output is written according to the following byte order:: @@ -585,7 +585,7 @@ These are the UTF-32 codec APIs: .. versionadded:: 2.6 -.. cfunction:: PyObject* PyUnicode_AsUTF32String(PyObject *unicode) +.. c:function:: PyObject* PyUnicode_AsUTF32String(PyObject *unicode) Return a Python string using the UTF-32 encoding in native byte order. The string always starts with a BOM mark. Error handling is "strict". Return @@ -600,7 +600,7 @@ UTF-16 Codecs These are the UTF-16 codec APIs: -.. cfunction:: PyObject* PyUnicode_DecodeUTF16(const char *s, Py_ssize_t size, const char *errors, int *byteorder) +.. c:function:: PyObject* PyUnicode_DecodeUTF16(const char *s, Py_ssize_t size, const char *errors, int *byteorder) Decode *size* bytes from a UTF-16 encoded buffer string and return the corresponding Unicode object. *errors* (if non-*NULL*) defines the error @@ -627,14 +627,14 @@ These are the UTF-16 codec APIs: Return *NULL* if an exception was raised by the codec. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *size*. This might require + This function used an :c:type:`int` type for *size*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: PyObject* PyUnicode_DecodeUTF16Stateful(const char *s, Py_ssize_t size, const char *errors, int *byteorder, Py_ssize_t *consumed) +.. c:function:: PyObject* PyUnicode_DecodeUTF16Stateful(const char *s, Py_ssize_t size, const char *errors, int *byteorder, Py_ssize_t *consumed) - If *consumed* is *NULL*, behave like :cfunc:`PyUnicode_DecodeUTF16`. If - *consumed* is not *NULL*, :cfunc:`PyUnicode_DecodeUTF16Stateful` will not treat + If *consumed* is *NULL*, behave like :c:func:`PyUnicode_DecodeUTF16`. If + *consumed* is not *NULL*, :c:func:`PyUnicode_DecodeUTF16Stateful` will not treat trailing incomplete UTF-16 byte sequences (such as an odd number of bytes or a split surrogate pair) as an error. Those bytes will not be decoded and the number of bytes that have been decoded will be stored in *consumed*. @@ -642,12 +642,12 @@ These are the UTF-16 codec APIs: .. versionadded:: 2.4 .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *size* and an :ctype:`int *` + This function used an :c:type:`int` type for *size* and an :c:type:`int *` type for *consumed*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: PyObject* PyUnicode_EncodeUTF16(const Py_UNICODE *s, Py_ssize_t size, const char *errors, int byteorder) +.. c:function:: PyObject* PyUnicode_EncodeUTF16(const Py_UNICODE *s, Py_ssize_t size, const char *errors, int byteorder) Return a Python string object holding the UTF-16 encoded value of the Unicode data in *s*. Output is written according to the following byte order:: @@ -659,18 +659,18 @@ These are the UTF-16 codec APIs: If byteorder is ``0``, the output string will always start with the Unicode BOM mark (U+FEFF). In the other two modes, no BOM mark is prepended. - If *Py_UNICODE_WIDE* is defined, a single :ctype:`Py_UNICODE` value may get - represented as a surrogate pair. If it is not defined, each :ctype:`Py_UNICODE` + If *Py_UNICODE_WIDE* is defined, a single :c:type:`Py_UNICODE` value may get + represented as a surrogate pair. If it is not defined, each :c:type:`Py_UNICODE` values is interpreted as an UCS-2 character. Return *NULL* if an exception was raised by the codec. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *size*. This might require + This function used an :c:type:`int` type for *size*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: PyObject* PyUnicode_AsUTF16String(PyObject *unicode) +.. c:function:: PyObject* PyUnicode_AsUTF16String(PyObject *unicode) Return a Python string using the UTF-16 encoding in native byte order. The string always starts with a BOM mark. Error handling is "strict". Return @@ -683,23 +683,23 @@ UTF-7 Codecs These are the UTF-7 codec APIs: -.. cfunction:: PyObject* PyUnicode_DecodeUTF7(const char *s, Py_ssize_t size, const char *errors) +.. c:function:: PyObject* PyUnicode_DecodeUTF7(const char *s, Py_ssize_t size, const char *errors) Create a Unicode object by decoding *size* bytes of the UTF-7 encoded string *s*. Return *NULL* if an exception was raised by the codec. -.. cfunction:: PyObject* PyUnicode_DecodeUTF7Stateful(const char *s, Py_ssize_t size, const char *errors, Py_ssize_t *consumed) +.. c:function:: PyObject* PyUnicode_DecodeUTF7Stateful(const char *s, Py_ssize_t size, const char *errors, Py_ssize_t *consumed) - If *consumed* is *NULL*, behave like :cfunc:`PyUnicode_DecodeUTF7`. If + If *consumed* is *NULL*, behave like :c:func:`PyUnicode_DecodeUTF7`. If *consumed* is not *NULL*, trailing incomplete UTF-7 base-64 sections will not be treated as an error. Those bytes will not be decoded and the number of bytes that have been decoded will be stored in *consumed*. -.. cfunction:: PyObject* PyUnicode_EncodeUTF7(const Py_UNICODE *s, Py_ssize_t size, int base64SetO, int base64WhiteSpace, const char *errors) +.. c:function:: PyObject* PyUnicode_EncodeUTF7(const Py_UNICODE *s, Py_ssize_t size, int base64SetO, int base64WhiteSpace, const char *errors) - Encode the :ctype:`Py_UNICODE` buffer of the given size using UTF-7 and + Encode the :c:type:`Py_UNICODE` buffer of the given size using UTF-7 and return a Python bytes object. Return *NULL* if an exception was raised by the codec. @@ -715,28 +715,28 @@ Unicode-Escape Codecs These are the "Unicode Escape" codec APIs: -.. cfunction:: PyObject* PyUnicode_DecodeUnicodeEscape(const char *s, Py_ssize_t size, const char *errors) +.. c:function:: PyObject* PyUnicode_DecodeUnicodeEscape(const char *s, Py_ssize_t size, const char *errors) Create a Unicode object by decoding *size* bytes of the Unicode-Escape encoded string *s*. Return *NULL* if an exception was raised by the codec. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *size*. This might require + This function used an :c:type:`int` type for *size*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: PyObject* PyUnicode_EncodeUnicodeEscape(const Py_UNICODE *s, Py_ssize_t size) +.. c:function:: PyObject* PyUnicode_EncodeUnicodeEscape(const Py_UNICODE *s, Py_ssize_t size) - Encode the :ctype:`Py_UNICODE` buffer of the given *size* using Unicode-Escape and + Encode the :c:type:`Py_UNICODE` buffer of the given *size* using Unicode-Escape and return a Python string object. Return *NULL* if an exception was raised by the codec. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *size*. This might require + This function used an :c:type:`int` type for *size*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: PyObject* PyUnicode_AsUnicodeEscapeString(PyObject *unicode) +.. c:function:: PyObject* PyUnicode_AsUnicodeEscapeString(PyObject *unicode) Encode a Unicode object using Unicode-Escape and return the result as Python string object. Error handling is "strict". Return *NULL* if an exception was @@ -749,28 +749,28 @@ Raw-Unicode-Escape Codecs These are the "Raw Unicode Escape" codec APIs: -.. cfunction:: PyObject* PyUnicode_DecodeRawUnicodeEscape(const char *s, Py_ssize_t size, const char *errors) +.. c:function:: PyObject* PyUnicode_DecodeRawUnicodeEscape(const char *s, Py_ssize_t size, const char *errors) Create a Unicode object by decoding *size* bytes of the Raw-Unicode-Escape encoded string *s*. Return *NULL* if an exception was raised by the codec. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *size*. This might require + This function used an :c:type:`int` type for *size*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: PyObject* PyUnicode_EncodeRawUnicodeEscape(const Py_UNICODE *s, Py_ssize_t size, const char *errors) +.. c:function:: PyObject* PyUnicode_EncodeRawUnicodeEscape(const Py_UNICODE *s, Py_ssize_t size, const char *errors) - Encode the :ctype:`Py_UNICODE` buffer of the given *size* using Raw-Unicode-Escape + Encode the :c:type:`Py_UNICODE` buffer of the given *size* using Raw-Unicode-Escape and return a Python string object. Return *NULL* if an exception was raised by the codec. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *size*. This might require + This function used an :c:type:`int` type for *size*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: PyObject* PyUnicode_AsRawUnicodeEscapeString(PyObject *unicode) +.. c:function:: PyObject* PyUnicode_AsRawUnicodeEscapeString(PyObject *unicode) Encode a Unicode object using Raw-Unicode-Escape and return the result as Python string object. Error handling is "strict". Return *NULL* if an exception @@ -784,27 +784,27 @@ These are the Latin-1 codec APIs: Latin-1 corresponds to the first 256 Unicode ordinals and only these are accepted by the codecs during encoding. -.. cfunction:: PyObject* PyUnicode_DecodeLatin1(const char *s, Py_ssize_t size, const char *errors) +.. c:function:: PyObject* PyUnicode_DecodeLatin1(const char *s, Py_ssize_t size, const char *errors) Create a Unicode object by decoding *size* bytes of the Latin-1 encoded string *s*. Return *NULL* if an exception was raised by the codec. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *size*. This might require + This function used an :c:type:`int` type for *size*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: PyObject* PyUnicode_EncodeLatin1(const Py_UNICODE *s, Py_ssize_t size, const char *errors) +.. c:function:: PyObject* PyUnicode_EncodeLatin1(const Py_UNICODE *s, Py_ssize_t size, const char *errors) - Encode the :ctype:`Py_UNICODE` buffer of the given *size* using Latin-1 and return + Encode the :c:type:`Py_UNICODE` buffer of the given *size* using Latin-1 and return a Python string object. Return *NULL* if an exception was raised by the codec. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *size*. This might require + This function used an :c:type:`int` type for *size*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: PyObject* PyUnicode_AsLatin1String(PyObject *unicode) +.. c:function:: PyObject* PyUnicode_AsLatin1String(PyObject *unicode) Encode a Unicode object using Latin-1 and return the result as Python string object. Error handling is "strict". Return *NULL* if an exception was raised @@ -818,27 +818,27 @@ These are the ASCII codec APIs. Only 7-bit ASCII data is accepted. All other codes generate errors. -.. cfunction:: PyObject* PyUnicode_DecodeASCII(const char *s, Py_ssize_t size, const char *errors) +.. c:function:: PyObject* PyUnicode_DecodeASCII(const char *s, Py_ssize_t size, const char *errors) Create a Unicode object by decoding *size* bytes of the ASCII encoded string *s*. Return *NULL* if an exception was raised by the codec. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *size*. This might require + This function used an :c:type:`int` type for *size*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: PyObject* PyUnicode_EncodeASCII(const Py_UNICODE *s, Py_ssize_t size, const char *errors) +.. c:function:: PyObject* PyUnicode_EncodeASCII(const Py_UNICODE *s, Py_ssize_t size, const char *errors) - Encode the :ctype:`Py_UNICODE` buffer of the given *size* using ASCII and return a + Encode the :c:type:`Py_UNICODE` buffer of the given *size* using ASCII and return a Python string object. Return *NULL* if an exception was raised by the codec. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *size*. This might require + This function used an :c:type:`int` type for *size*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: PyObject* PyUnicode_AsASCIIString(PyObject *unicode) +.. c:function:: PyObject* PyUnicode_AsASCIIString(PyObject *unicode) Encode a Unicode object using ASCII and return the result as Python string object. Error handling is "strict". Return *NULL* if an exception was raised @@ -871,7 +871,7 @@ characters to different code points. These are the mapping codec APIs: -.. cfunction:: PyObject* PyUnicode_DecodeCharmap(const char *s, Py_ssize_t size, PyObject *mapping, const char *errors) +.. c:function:: PyObject* PyUnicode_DecodeCharmap(const char *s, Py_ssize_t size, PyObject *mapping, const char *errors) Create a Unicode object by decoding *size* bytes of the encoded string *s* using the given *mapping* object. Return *NULL* if an exception was raised by the @@ -884,22 +884,22 @@ These are the mapping codec APIs: Allowed unicode string as mapping argument. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *size*. This might require + This function used an :c:type:`int` type for *size*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: PyObject* PyUnicode_EncodeCharmap(const Py_UNICODE *s, Py_ssize_t size, PyObject *mapping, const char *errors) +.. c:function:: PyObject* PyUnicode_EncodeCharmap(const Py_UNICODE *s, Py_ssize_t size, PyObject *mapping, const char *errors) - Encode the :ctype:`Py_UNICODE` buffer of the given *size* using the given + Encode the :c:type:`Py_UNICODE` buffer of the given *size* using the given *mapping* object and return a Python string object. Return *NULL* if an exception was raised by the codec. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *size*. This might require + This function used an :c:type:`int` type for *size*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: PyObject* PyUnicode_AsCharmapString(PyObject *unicode, PyObject *mapping) +.. c:function:: PyObject* PyUnicode_AsCharmapString(PyObject *unicode, PyObject *mapping) Encode a Unicode object using the given *mapping* object and return the result as Python string object. Error handling is "strict". Return *NULL* if an @@ -908,9 +908,9 @@ These are the mapping codec APIs: The following codec API is special in that maps Unicode to Unicode. -.. cfunction:: PyObject* PyUnicode_TranslateCharmap(const Py_UNICODE *s, Py_ssize_t size, PyObject *table, const char *errors) +.. c:function:: PyObject* PyUnicode_TranslateCharmap(const Py_UNICODE *s, Py_ssize_t size, PyObject *table, const char *errors) - Translate a :ctype:`Py_UNICODE` buffer of the given *size* by applying a + Translate a :c:type:`Py_UNICODE` buffer of the given *size* by applying a character mapping *table* to it and return the resulting Unicode object. Return *NULL* when an exception was raised by the codec. @@ -922,7 +922,7 @@ The following codec API is special in that maps Unicode to Unicode. :exc:`LookupError`) are left untouched and are copied as-is. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *size*. This might require + This function used an :c:type:`int` type for *size*. This might require changes in your code for properly supporting 64-bit systems. @@ -935,37 +935,37 @@ DBCS) is a class of encodings, not just one. The target encoding is defined by the user settings on the machine running the codec. -.. cfunction:: PyObject* PyUnicode_DecodeMBCS(const char *s, Py_ssize_t size, const char *errors) +.. c:function:: PyObject* PyUnicode_DecodeMBCS(const char *s, Py_ssize_t size, const char *errors) Create a Unicode object by decoding *size* bytes of the MBCS encoded string *s*. Return *NULL* if an exception was raised by the codec. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *size*. This might require + This function used an :c:type:`int` type for *size*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: PyObject* PyUnicode_DecodeMBCSStateful(const char *s, int size, const char *errors, int *consumed) +.. c:function:: PyObject* PyUnicode_DecodeMBCSStateful(const char *s, int size, const char *errors, int *consumed) - If *consumed* is *NULL*, behave like :cfunc:`PyUnicode_DecodeMBCS`. If - *consumed* is not *NULL*, :cfunc:`PyUnicode_DecodeMBCSStateful` will not decode + If *consumed* is *NULL*, behave like :c:func:`PyUnicode_DecodeMBCS`. If + *consumed* is not *NULL*, :c:func:`PyUnicode_DecodeMBCSStateful` will not decode trailing lead byte and the number of bytes that have been decoded will be stored in *consumed*. .. versionadded:: 2.5 -.. cfunction:: PyObject* PyUnicode_EncodeMBCS(const Py_UNICODE *s, Py_ssize_t size, const char *errors) +.. c:function:: PyObject* PyUnicode_EncodeMBCS(const Py_UNICODE *s, Py_ssize_t size, const char *errors) - Encode the :ctype:`Py_UNICODE` buffer of the given *size* using MBCS and return a + Encode the :c:type:`Py_UNICODE` buffer of the given *size* using MBCS and return a Python string object. Return *NULL* if an exception was raised by the codec. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *size*. This might require + This function used an :c:type:`int` type for *size*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: PyObject* PyUnicode_AsMBCSString(PyObject *unicode) +.. c:function:: PyObject* PyUnicode_AsMBCSString(PyObject *unicode) Encode a Unicode object using MBCS and return the result as Python string object. Error handling is "strict". Return *NULL* if an exception was raised @@ -987,12 +987,12 @@ integers as appropriate. They all return *NULL* or ``-1`` if an exception occurs. -.. cfunction:: PyObject* PyUnicode_Concat(PyObject *left, PyObject *right) +.. c:function:: PyObject* PyUnicode_Concat(PyObject *left, PyObject *right) Concat two strings giving a new Unicode string. -.. cfunction:: PyObject* PyUnicode_Split(PyObject *s, PyObject *sep, Py_ssize_t maxsplit) +.. c:function:: PyObject* PyUnicode_Split(PyObject *s, PyObject *sep, Py_ssize_t maxsplit) Split a string giving a list of Unicode strings. If *sep* is *NULL*, splitting will be done at all whitespace substrings. Otherwise, splits occur at the given @@ -1000,18 +1000,18 @@ They all return *NULL* or ``-1`` if an exception occurs. set. Separators are not included in the resulting list. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *maxsplit*. This might require + This function used an :c:type:`int` type for *maxsplit*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: PyObject* PyUnicode_Splitlines(PyObject *s, int keepend) +.. c:function:: PyObject* PyUnicode_Splitlines(PyObject *s, int keepend) Split a Unicode string at line breaks, returning a list of Unicode strings. CRLF is considered to be one line break. If *keepend* is 0, the Line break characters are not included in the resulting strings. -.. cfunction:: PyObject* PyUnicode_Translate(PyObject *str, PyObject *table, const char *errors) +.. c:function:: PyObject* PyUnicode_Translate(PyObject *str, PyObject *table, const char *errors) Translate a string by applying a character mapping table to it and return the resulting Unicode object. @@ -1027,25 +1027,25 @@ They all return *NULL* or ``-1`` if an exception occurs. use the default error handling. -.. cfunction:: PyObject* PyUnicode_Join(PyObject *separator, PyObject *seq) +.. c:function:: PyObject* PyUnicode_Join(PyObject *separator, PyObject *seq) Join a sequence of strings using the given *separator* and return the resulting Unicode string. -.. cfunction:: int PyUnicode_Tailmatch(PyObject *str, PyObject *substr, Py_ssize_t start, Py_ssize_t end, int direction) +.. c:function:: int PyUnicode_Tailmatch(PyObject *str, PyObject *substr, Py_ssize_t start, Py_ssize_t end, int direction) Return 1 if *substr* matches ``str[start:end]`` at the given tail end (*direction* == -1 means to do a prefix match, *direction* == 1 a suffix match), 0 otherwise. Return ``-1`` if an error occurred. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *start* and *end*. This + This function used an :c:type:`int` type for *start* and *end*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: Py_ssize_t PyUnicode_Find(PyObject *str, PyObject *substr, Py_ssize_t start, Py_ssize_t end, int direction) +.. c:function:: Py_ssize_t PyUnicode_Find(PyObject *str, PyObject *substr, Py_ssize_t start, Py_ssize_t end, int direction) Return the first position of *substr* in ``str[start:end]`` using the given *direction* (*direction* == 1 means to do a forward search, *direction* == -1 a @@ -1054,40 +1054,40 @@ They all return *NULL* or ``-1`` if an exception occurs. occurred and an exception has been set. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *start* and *end*. This + This function used an :c:type:`int` type for *start* and *end*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: Py_ssize_t PyUnicode_Count(PyObject *str, PyObject *substr, Py_ssize_t start, Py_ssize_t end) +.. c:function:: Py_ssize_t PyUnicode_Count(PyObject *str, PyObject *substr, Py_ssize_t start, Py_ssize_t end) Return the number of non-overlapping occurrences of *substr* in ``str[start:end]``. Return ``-1`` if an error occurred. .. versionchanged:: 2.5 - This function returned an :ctype:`int` type and used an :ctype:`int` + This function returned an :c:type:`int` type and used an :c:type:`int` type for *start* and *end*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: PyObject* PyUnicode_Replace(PyObject *str, PyObject *substr, PyObject *replstr, Py_ssize_t maxcount) +.. c:function:: PyObject* PyUnicode_Replace(PyObject *str, PyObject *substr, PyObject *replstr, Py_ssize_t maxcount) Replace at most *maxcount* occurrences of *substr* in *str* with *replstr* and return the resulting Unicode object. *maxcount* == -1 means replace all occurrences. .. versionchanged:: 2.5 - This function used an :ctype:`int` type for *maxcount*. This might + This function used an :c:type:`int` type for *maxcount*. This might require changes in your code for properly supporting 64-bit systems. -.. cfunction:: int PyUnicode_Compare(PyObject *left, PyObject *right) +.. c:function:: int PyUnicode_Compare(PyObject *left, PyObject *right) Compare two strings and return -1, 0, 1 for less than, equal, and greater than, respectively. -.. cfunction:: int PyUnicode_RichCompare(PyObject *left, PyObject *right, int op) +.. c:function:: int PyUnicode_RichCompare(PyObject *left, PyObject *right, int op) Rich compare two unicode strings and return one of the following: @@ -1103,13 +1103,13 @@ They all return *NULL* or ``-1`` if an exception occurs. :const:`Py_NE`, :const:`Py_LT`, and :const:`Py_LE`. -.. cfunction:: PyObject* PyUnicode_Format(PyObject *format, PyObject *args) +.. c:function:: PyObject* PyUnicode_Format(PyObject *format, PyObject *args) Return a new string object from *format* and *args*; this is analogous to ``format % args``. The *args* argument must be a tuple. -.. cfunction:: int PyUnicode_Contains(PyObject *container, PyObject *element) +.. c:function:: int PyUnicode_Contains(PyObject *container, PyObject *element) Check whether *element* is contained in *container* and return true or false accordingly. diff --git a/Doc/c-api/veryhigh.rst b/Doc/c-api/veryhigh.rst index 188fac8..4ce3b03 100644 --- a/Doc/c-api/veryhigh.rst +++ b/Doc/c-api/veryhigh.rst @@ -16,20 +16,20 @@ parameter. The available start symbols are :const:`Py_eval_input`, :const:`Py_file_input`, and :const:`Py_single_input`. These are described following the functions which accept them as parameters. -Note also that several of these functions take :ctype:`FILE\*` parameters. One -particular issue which needs to be handled carefully is that the :ctype:`FILE` +Note also that several of these functions take :c:type:`FILE\*` parameters. One +particular issue which needs to be handled carefully is that the :c:type:`FILE` structure for different C libraries can be different and incompatible. Under Windows (at least), it is possible for dynamically linked extensions to actually -use different libraries, so care should be taken that :ctype:`FILE\*` parameters +use different libraries, so care should be taken that :c:type:`FILE\*` parameters are only passed to these functions if it is certain that they were created by the same library that the Python runtime is using. -.. cfunction:: int Py_Main(int argc, char **argv) +.. c:function:: int Py_Main(int argc, char **argv) The main program for the standard interpreter. This is made available for programs which embed Python. The *argc* and *argv* parameters should be - prepared exactly as those which are passed to a C program's :cfunc:`main` + prepared exactly as those which are passed to a C program's :c:func:`main` function. It is important to note that the argument list may be modified (but the contents of the strings pointed to by the argument list are not). The return value will be ``0`` if the interpreter exits normally (ie, without an @@ -41,40 +41,40 @@ the same library that the Python runtime is using. ``Py_InspectFlag`` is not set. -.. cfunction:: int PyRun_AnyFile(FILE *fp, const char *filename) +.. c:function:: int PyRun_AnyFile(FILE *fp, const char *filename) - This is a simplified interface to :cfunc:`PyRun_AnyFileExFlags` below, leaving + This is a simplified interface to :c:func:`PyRun_AnyFileExFlags` below, leaving *closeit* set to ``0`` and *flags* set to *NULL*. -.. cfunction:: int PyRun_AnyFileFlags(FILE *fp, const char *filename, PyCompilerFlags *flags) +.. c:function:: int PyRun_AnyFileFlags(FILE *fp, const char *filename, PyCompilerFlags *flags) - This is a simplified interface to :cfunc:`PyRun_AnyFileExFlags` below, leaving + This is a simplified interface to :c:func:`PyRun_AnyFileExFlags` below, leaving the *closeit* argument set to ``0``. -.. cfunction:: int PyRun_AnyFileEx(FILE *fp, const char *filename, int closeit) +.. c:function:: int PyRun_AnyFileEx(FILE *fp, const char *filename, int closeit) - This is a simplified interface to :cfunc:`PyRun_AnyFileExFlags` below, leaving + This is a simplified interface to :c:func:`PyRun_AnyFileExFlags` below, leaving the *flags* argument set to *NULL*. -.. cfunction:: int PyRun_AnyFileExFlags(FILE *fp, const char *filename, int closeit, PyCompilerFlags *flags) +.. c:function:: int PyRun_AnyFileExFlags(FILE *fp, const char *filename, int closeit, PyCompilerFlags *flags) If *fp* refers to a file associated with an interactive device (console or terminal input or Unix pseudo-terminal), return the value of - :cfunc:`PyRun_InteractiveLoop`, otherwise return the result of - :cfunc:`PyRun_SimpleFile`. If *filename* is *NULL*, this function uses + :c:func:`PyRun_InteractiveLoop`, otherwise return the result of + :c:func:`PyRun_SimpleFile`. If *filename* is *NULL*, this function uses ``"???"`` as the filename. -.. cfunction:: int PyRun_SimpleString(const char *command) +.. c:function:: int PyRun_SimpleString(const char *command) - This is a simplified interface to :cfunc:`PyRun_SimpleStringFlags` below, + This is a simplified interface to :c:func:`PyRun_SimpleStringFlags` below, leaving the *PyCompilerFlags\** argument set to NULL. -.. cfunction:: int PyRun_SimpleStringFlags(const char *command, PyCompilerFlags *flags) +.. c:function:: int PyRun_SimpleStringFlags(const char *command, PyCompilerFlags *flags) Executes the Python source code from *command* in the :mod:`__main__` module according to the *flags* argument. If :mod:`__main__` does not already exist, it @@ -87,39 +87,39 @@ the same library that the Python runtime is using. ``Py_InspectFlag`` is not set. -.. cfunction:: int PyRun_SimpleFile(FILE *fp, const char *filename) +.. c:function:: int PyRun_SimpleFile(FILE *fp, const char *filename) - This is a simplified interface to :cfunc:`PyRun_SimpleFileExFlags` below, + This is a simplified interface to :c:func:`PyRun_SimpleFileExFlags` below, leaving *closeit* set to ``0`` and *flags* set to *NULL*. -.. cfunction:: int PyRun_SimpleFileFlags(FILE *fp, const char *filename, PyCompilerFlags *flags) +.. c:function:: int PyRun_SimpleFileFlags(FILE *fp, const char *filename, PyCompilerFlags *flags) - This is a simplified interface to :cfunc:`PyRun_SimpleFileExFlags` below, + This is a simplified interface to :c:func:`PyRun_SimpleFileExFlags` below, leaving *closeit* set to ``0``. -.. cfunction:: int PyRun_SimpleFileEx(FILE *fp, const char *filename, int closeit) +.. c:function:: int PyRun_SimpleFileEx(FILE *fp, const char *filename, int closeit) - This is a simplified interface to :cfunc:`PyRun_SimpleFileExFlags` below, + This is a simplified interface to :c:func:`PyRun_SimpleFileExFlags` below, leaving *flags* set to *NULL*. -.. cfunction:: int PyRun_SimpleFileExFlags(FILE *fp, const char *filename, int closeit, PyCompilerFlags *flags) +.. c:function:: int PyRun_SimpleFileExFlags(FILE *fp, const char *filename, int closeit, PyCompilerFlags *flags) - Similar to :cfunc:`PyRun_SimpleStringFlags`, but the Python source code is read + Similar to :c:func:`PyRun_SimpleStringFlags`, but the Python source code is read from *fp* instead of an in-memory string. *filename* should be the name of the file. If *closeit* is true, the file is closed before PyRun_SimpleFileExFlags returns. -.. cfunction:: int PyRun_InteractiveOne(FILE *fp, const char *filename) +.. c:function:: int PyRun_InteractiveOne(FILE *fp, const char *filename) - This is a simplified interface to :cfunc:`PyRun_InteractiveOneFlags` below, + This is a simplified interface to :c:func:`PyRun_InteractiveOneFlags` below, leaving *flags* set to *NULL*. -.. cfunction:: int PyRun_InteractiveOneFlags(FILE *fp, const char *filename, PyCompilerFlags *flags) +.. c:function:: int PyRun_InteractiveOneFlags(FILE *fp, const char *filename, PyCompilerFlags *flags) Read and execute a single statement from a file associated with an interactive device according to the *flags* argument. The user will be @@ -130,34 +130,34 @@ the same library that the Python runtime is using. :file:`Python.h`, so must be included specifically if needed.) -.. cfunction:: int PyRun_InteractiveLoop(FILE *fp, const char *filename) +.. c:function:: int PyRun_InteractiveLoop(FILE *fp, const char *filename) - This is a simplified interface to :cfunc:`PyRun_InteractiveLoopFlags` below, + This is a simplified interface to :c:func:`PyRun_InteractiveLoopFlags` below, leaving *flags* set to *NULL*. -.. cfunction:: int PyRun_InteractiveLoopFlags(FILE *fp, const char *filename, PyCompilerFlags *flags) +.. c:function:: int PyRun_InteractiveLoopFlags(FILE *fp, const char *filename, PyCompilerFlags *flags) Read and execute statements from a file associated with an interactive device until EOF is reached. The user will be prompted using ``sys.ps1`` and ``sys.ps2``. Returns ``0`` at EOF. -.. cfunction:: struct _node* PyParser_SimpleParseString(const char *str, int start) +.. c:function:: struct _node* PyParser_SimpleParseString(const char *str, int start) This is a simplified interface to - :cfunc:`PyParser_SimpleParseStringFlagsFilename` below, leaving *filename* set + :c:func:`PyParser_SimpleParseStringFlagsFilename` below, leaving *filename* set to *NULL* and *flags* set to ``0``. -.. cfunction:: struct _node* PyParser_SimpleParseStringFlags( const char *str, int start, int flags) +.. c:function:: struct _node* PyParser_SimpleParseStringFlags( const char *str, int start, int flags) This is a simplified interface to - :cfunc:`PyParser_SimpleParseStringFlagsFilename` below, leaving *filename* set + :c:func:`PyParser_SimpleParseStringFlagsFilename` below, leaving *filename* set to *NULL*. -.. cfunction:: struct _node* PyParser_SimpleParseStringFlagsFilename( const char *str, const char *filename, int start, int flags) +.. c:function:: struct _node* PyParser_SimpleParseStringFlagsFilename( const char *str, const char *filename, int start, int flags) Parse Python source code from *str* using the start token *start* according to the *flags* argument. The result can be used to create a code object which can @@ -165,25 +165,25 @@ the same library that the Python runtime is using. many times. -.. cfunction:: struct _node* PyParser_SimpleParseFile(FILE *fp, const char *filename, int start) +.. c:function:: struct _node* PyParser_SimpleParseFile(FILE *fp, const char *filename, int start) - This is a simplified interface to :cfunc:`PyParser_SimpleParseFileFlags` below, + This is a simplified interface to :c:func:`PyParser_SimpleParseFileFlags` below, leaving *flags* set to ``0`` -.. cfunction:: struct _node* PyParser_SimpleParseFileFlags(FILE *fp, const char *filename, int start, int flags) +.. c:function:: struct _node* PyParser_SimpleParseFileFlags(FILE *fp, const char *filename, int start, int flags) - Similar to :cfunc:`PyParser_SimpleParseStringFlagsFilename`, but the Python + Similar to :c:func:`PyParser_SimpleParseStringFlagsFilename`, but the Python source code is read from *fp* instead of an in-memory string. -.. cfunction:: PyObject* PyRun_String(const char *str, int start, PyObject *globals, PyObject *locals) +.. c:function:: PyObject* PyRun_String(const char *str, int start, PyObject *globals, PyObject *locals) - This is a simplified interface to :cfunc:`PyRun_StringFlags` below, leaving + This is a simplified interface to :c:func:`PyRun_StringFlags` below, leaving *flags* set to *NULL*. -.. cfunction:: PyObject* PyRun_StringFlags(const char *str, int start, PyObject *globals, PyObject *locals, PyCompilerFlags *flags) +.. c:function:: PyObject* PyRun_StringFlags(const char *str, int start, PyObject *globals, PyObject *locals, PyCompilerFlags *flags) Execute Python source code from *str* in the context specified by the dictionaries *globals* and *locals* with the compiler flags specified by @@ -194,39 +194,39 @@ the same library that the Python runtime is using. exception was raised. -.. cfunction:: PyObject* PyRun_File(FILE *fp, const char *filename, int start, PyObject *globals, PyObject *locals) +.. c:function:: PyObject* PyRun_File(FILE *fp, const char *filename, int start, PyObject *globals, PyObject *locals) - This is a simplified interface to :cfunc:`PyRun_FileExFlags` below, leaving + This is a simplified interface to :c:func:`PyRun_FileExFlags` below, leaving *closeit* set to ``0`` and *flags* set to *NULL*. -.. cfunction:: PyObject* PyRun_FileEx(FILE *fp, const char *filename, int start, PyObject *globals, PyObject *locals, int closeit) +.. c:function:: PyObject* PyRun_FileEx(FILE *fp, const char *filename, int start, PyObject *globals, PyObject *locals, int closeit) - This is a simplified interface to :cfunc:`PyRun_FileExFlags` below, leaving + This is a simplified interface to :c:func:`PyRun_FileExFlags` below, leaving *flags* set to *NULL*. -.. cfunction:: PyObject* PyRun_FileFlags(FILE *fp, const char *filename, int start, PyObject *globals, PyObject *locals, PyCompilerFlags *flags) +.. c:function:: PyObject* PyRun_FileFlags(FILE *fp, const char *filename, int start, PyObject *globals, PyObject *locals, PyCompilerFlags *flags) - This is a simplified interface to :cfunc:`PyRun_FileExFlags` below, leaving + This is a simplified interface to :c:func:`PyRun_FileExFlags` below, leaving *closeit* set to ``0``. -.. cfunction:: PyObject* PyRun_FileExFlags(FILE *fp, const char *filename, int start, PyObject *globals, PyObject *locals, int closeit, PyCompilerFlags *flags) +.. c:function:: PyObject* PyRun_FileExFlags(FILE *fp, const char *filename, int start, PyObject *globals, PyObject *locals, int closeit, PyCompilerFlags *flags) - Similar to :cfunc:`PyRun_StringFlags`, but the Python source code is read from + Similar to :c:func:`PyRun_StringFlags`, but the Python source code is read from *fp* instead of an in-memory string. *filename* should be the name of the file. - If *closeit* is true, the file is closed before :cfunc:`PyRun_FileExFlags` + If *closeit* is true, the file is closed before :c:func:`PyRun_FileExFlags` returns. -.. cfunction:: PyObject* Py_CompileString(const char *str, const char *filename, int start) +.. c:function:: PyObject* Py_CompileString(const char *str, const char *filename, int start) - This is a simplified interface to :cfunc:`Py_CompileStringFlags` below, leaving + This is a simplified interface to :c:func:`Py_CompileStringFlags` below, leaving *flags* set to *NULL*. -.. cfunction:: PyObject* Py_CompileStringFlags(const char *str, const char *filename, int start, PyCompilerFlags *flags) +.. c:function:: PyObject* Py_CompileStringFlags(const char *str, const char *filename, int start, PyCompilerFlags *flags) Parse and compile the Python source code in *str*, returning the resulting code object. The start token is given by *start*; this can be used to constrain the @@ -237,14 +237,14 @@ the same library that the Python runtime is using. be parsed or compiled. -.. cfunction:: PyObject* PyEval_EvalCode(PyCodeObject *co, PyObject *globals, PyObject *locals) +.. c:function:: PyObject* PyEval_EvalCode(PyCodeObject *co, PyObject *globals, PyObject *locals) - This is a simplified interface to :cfunc:`PyEval_EvalCodeEx`, with just + This is a simplified interface to :c:func:`PyEval_EvalCodeEx`, with just the code object, and the dictionaries of global and local variables. The other arguments are set to *NULL*. -.. cfunction:: PyObject* PyEval_EvalCodeEx(PyCodeObject *co, PyObject *globals, PyObject *locals, PyObject **args, int argcount, PyObject **kws, int kwcount, PyObject **defs, int defcount, PyObject *closure) +.. c:function:: PyObject* PyEval_EvalCodeEx(PyCodeObject *co, PyObject *globals, PyObject *locals, PyObject **args, int argcount, PyObject **kws, int kwcount, PyObject **defs, int defcount, PyObject *closure) Evaluate a precompiled code object, given a particular environment for its evaluation. This environment consists of dictionaries of global and local @@ -252,13 +252,13 @@ the same library that the Python runtime is using. cells. -.. cfunction:: PyObject* PyEval_EvalFrame(PyFrameObject *f) +.. c:function:: PyObject* PyEval_EvalFrame(PyFrameObject *f) Evaluate an execution frame. This is a simplified interface to PyEval_EvalFrameEx, for backward compatibility. -.. cfunction:: PyObject* PyEval_EvalFrameEx(PyFrameObject *f, int throwflag) +.. c:function:: PyObject* PyEval_EvalFrameEx(PyFrameObject *f, int throwflag) This is the main, unvarnished function of Python interpretation. It is literally 2000 lines long. The code object associated with the execution @@ -268,39 +268,39 @@ the same library that the Python runtime is using. :meth:`throw` methods of generator objects. -.. cfunction:: int PyEval_MergeCompilerFlags(PyCompilerFlags *cf) +.. c:function:: int PyEval_MergeCompilerFlags(PyCompilerFlags *cf) This function changes the flags of the current evaluation frame, and returns true on success, false on failure. -.. cvar:: int Py_eval_input +.. c:var:: int Py_eval_input .. index:: single: Py_CompileString() The start symbol from the Python grammar for isolated expressions; for use with - :cfunc:`Py_CompileString`. + :c:func:`Py_CompileString`. -.. cvar:: int Py_file_input +.. c:var:: int Py_file_input .. index:: single: Py_CompileString() The start symbol from the Python grammar for sequences of statements as read - from a file or other source; for use with :cfunc:`Py_CompileString`. This is + from a file or other source; for use with :c:func:`Py_CompileString`. This is the symbol to use when compiling arbitrarily long Python source code. -.. cvar:: int Py_single_input +.. c:var:: int Py_single_input .. index:: single: Py_CompileString() The start symbol from the Python grammar for a single statement; for use with - :cfunc:`Py_CompileString`. This is the symbol used for the interactive + :c:func:`Py_CompileString`. This is the symbol used for the interactive interpreter loop. -.. ctype:: struct PyCompilerFlags +.. c:type:: struct PyCompilerFlags This is the structure used to hold compiler flags. In cases where code is only being compiled, it is passed as ``int flags``, and in cases where code is being @@ -316,7 +316,7 @@ the same library that the Python runtime is using. } -.. cvar:: int CO_FUTURE_DIVISION +.. c:var:: int CO_FUTURE_DIVISION This bit can be set in *flags* to cause division operator ``/`` to be interpreted as "true division" according to :pep:`238`. diff --git a/Doc/c-api/weakref.rst b/Doc/c-api/weakref.rst index 226ec38..243cfd1 100644 --- a/Doc/c-api/weakref.rst +++ b/Doc/c-api/weakref.rst @@ -11,28 +11,28 @@ simple reference object, and the second acts as a proxy for the original object as much as it can. -.. cfunction:: int PyWeakref_Check(ob) +.. c:function:: int PyWeakref_Check(ob) Return true if *ob* is either a reference or proxy object. .. versionadded:: 2.2 -.. cfunction:: int PyWeakref_CheckRef(ob) +.. c:function:: int PyWeakref_CheckRef(ob) Return true if *ob* is a reference object. .. versionadded:: 2.2 -.. cfunction:: int PyWeakref_CheckProxy(ob) +.. c:function:: int PyWeakref_CheckProxy(ob) Return true if *ob* is a proxy object. .. versionadded:: 2.2 -.. cfunction:: PyObject* PyWeakref_NewRef(PyObject *ob, PyObject *callback) +.. c:function:: PyObject* PyWeakref_NewRef(PyObject *ob, PyObject *callback) Return a weak reference object for the object *ob*. This will always return a new reference, but is not guaranteed to create a new object; an existing @@ -46,7 +46,7 @@ as much as it can. .. versionadded:: 2.2 -.. cfunction:: PyObject* PyWeakref_NewProxy(PyObject *ob, PyObject *callback) +.. c:function:: PyObject* PyWeakref_NewProxy(PyObject *ob, PyObject *callback) Return a weak reference proxy object for the object *ob*. This will always return a new reference, but is not guaranteed to create a new object; an @@ -60,7 +60,7 @@ as much as it can. .. versionadded:: 2.2 -.. cfunction:: PyObject* PyWeakref_GetObject(PyObject *ref) +.. c:function:: PyObject* PyWeakref_GetObject(PyObject *ref) Return the referenced object from a weak reference, *ref*. If the referent is no longer live, returns :const:`Py_None`. @@ -70,14 +70,14 @@ as much as it can. .. warning:: This function returns a **borrowed reference** to the referenced object. - This means that you should always call :cfunc:`Py_INCREF` on the object + This means that you should always call :c:func:`Py_INCREF` on the object except if you know that it cannot be destroyed while you are still using it. -.. cfunction:: PyObject* PyWeakref_GET_OBJECT(PyObject *ref) +.. c:function:: PyObject* PyWeakref_GET_OBJECT(PyObject *ref) - Similar to :cfunc:`PyWeakref_GetObject`, but implemented as a macro that does no + Similar to :c:func:`PyWeakref_GetObject`, but implemented as a macro that does no error checking. .. versionadded:: 2.2 |