diff options
Diffstat (limited to 'Doc/ref/ref6.tex')
-rw-r--r-- | Doc/ref/ref6.tex | 224 |
1 files changed, 141 insertions, 83 deletions
diff --git a/Doc/ref/ref6.tex b/Doc/ref/ref6.tex index 80e9a71..1c5f332 100644 --- a/Doc/ref/ref6.tex +++ b/Doc/ref/ref6.tex @@ -7,6 +7,7 @@ by semicolons. The syntax for simple statements is: \begin{verbatim} simple_stmt: expression_stmt + | assert_stmt | assignment_stmt | pass_stmt | del_stmt @@ -26,22 +27,23 @@ simple_stmt: expression_stmt Expression statements are used (mostly interactively) to compute and write a value, or (usually) to call a procedure (a function that returns no meaningful result; in Python, procedures return the value -\code{None}): +\code{None}). Other uses of expression statements are allowed and +occasionally useful. The syntax for an expression statement is: \begin{verbatim} -expression_stmt: condition_list +expression_stmt: expression_list \end{verbatim} -An expression statement evaluates the condition list (which may be a -single condition). +An expression statement evaluates the expression list (which may be a +single expression). \indexii{expression}{list} In interactive mode, if the value is not \code{None}, it is converted -to a string using the rules for string conversions (expressions in -reverse quotes), and the resulting string is written to standard -output (see section \ref{print}) on a line by itself. -(The exception for \code{None} is made so that procedure calls, which -are syntactically equivalent to expressions, do not cause any output.) +to a string using the built-in \function{repr()}\bifuncindex{repr} +function and the resulting string is written to standard output (see +section \ref{print}) on a line by itself. (Expression statements +yielding None are not written, so that procedure calls do not cause +any output.) \ttindex{None} \indexii{string}{conversion} \index{output} @@ -49,6 +51,41 @@ are syntactically equivalent to expressions, do not cause any output.) \indexii{writing}{values} \indexii{procedure}{call} +\section{Assert statements}\stindex{assert} + +Assert statements are a convenient way to insert debugging +assertions\indexii{debugging}{assertions} into a program: + +\begin{verbatim} +assert_statement: "assert" expression ["," expression] +\end{verbatim} + +The simple form, ``\code{assert expression}'', is equivalent to + +\begin{verbatim} +if __debug__: + if not expression: raise AssertionError +\end{verbatim} + +The extended form, ``\code{assert expression1, expression2}'', is +equivalent to + +\begin{verbatim} +if __debug__: + if not expression1: raise AssertionError, expression2 +\end{verbatim} + +These equivalences assume that \code{__debug__}\ttindex{__debug__} and +\code{AssertionError}\exindex{AssertionError} refer to the built-in +variables with those names. In the current implementation, the +built-in variable \code{__debug__} is 1 under normal circumstances, 0 +when optimization is requested (command line option -O). The current +code generator emits no code for an assert statement when optimization +is requested at compile time. Note that it is unnecessary to include +the source code for the expression that failed in the error message; +it will be displayed as part of the stack trace. + + \section{Assignment statements} \indexii{assignment}{statement} @@ -91,14 +128,17 @@ follows. \begin{itemize} \item -If the target list is a single target: the object is assigned to that +If the target list is a single target: The object is assigned to that target. \item -If the target list is a comma-separated list of targets: the object -must be a tuple with the same number of items as the list contains -targets, and the items are assigned, from left to right, to the -corresponding targets. +If the target list is a comma-separated list of targets: The object +must be a sequence with the same number of items as the there are +targets in the target list, and the items are assigned, from left to +right, to the corresponding targets. (This rule is relaxed as of +Python 1.5; in earlier versions, the object had to be a tuple. Since +strings are sequences, an assignment like ``\code{a, b = "xy"}'' is +now legal as long as the string has the right length.) \end{itemize} @@ -114,27 +154,26 @@ If the target is an identifier (name): \item If the name does not occur in a \keyword{global} statement in the current -code block: the name is bound to the object in the current local name -space. +code block: the name is bound to the object in the current local +namespace. \stindex{global} \item -Otherwise: the name is bound to the object in the current global name -space. +Otherwise: the name is bound to the object in the current global +namespace. \end{itemize} % nested -The name is rebound if it was already bound. - -\item -If the target is a target list enclosed in parentheses: the object is -assigned to that target list as described above. +The name is rebound if it was already bound. This may cause the +reference count for the object previously bound to the name to reach +zero, causing the object to be deallocated and its +destructor\index{destructor} (if it has one) to be called. \item -If the target is a target list enclosed in square brackets: the object -must be a list with the same number of items as the target list -contains targets, and its items are assigned, from left to right, to -the corresponding targets. +If the target is a target list enclosed in parentheses or in square +brackets: The object must be a sequence with the same number of items +as there are targets in the target list, and its items are assigned, +from left to right, to the corresponding targets. \item If the target is an attribute reference: The primary expression in the @@ -148,12 +187,12 @@ attribute; if it cannot perform the assignment, it raises an exception \item If the target is a subscription: The primary expression in the reference is evaluated. It should yield either a mutable sequence -(list) object or a mapping (dictionary) object. Next, the subscript -expression is evaluated. +object (e.g., a list) or a mapping object (e.g., a dictionary). Next, +the subscript expression is evaluated. \indexii{subscription}{assignment} \obindex{mutable} -If the primary is a mutable sequence object (a list), the subscript +If the primary is a mutable sequence object (e.g., a list), the subscript must yield a plain integer. If it is negative, the sequence's length is added to it. The resulting value must be a nonnegative integer less than the sequence's length, and the sequence is asked to assign @@ -163,7 +202,7 @@ sequence cannot add new items to a list). \obindex{sequence} \obindex{list} -If the primary is a mapping (dictionary) object, the subscript must +If the primary is a mapping object (e.g., a dictionary), the subscript must have a type compatible with the mapping's key type, and the mapping is then asked to create a key/datum pair which maps the subscript to the assigned object. This can either replace an existing key/value @@ -174,7 +213,7 @@ key with the same value existed). \item If the target is a slicing: The primary expression in the reference is -evaluated. It should yield a mutable sequence object (e.g. a list). The +evaluated. It should yield a mutable sequence object (e.g., a list). The assigned object should be a sequence object of the same type. Next, the lower and upper bound expressions are evaluated, insofar they are present; defaults are zero and the sequence's length. The bounds @@ -195,10 +234,10 @@ during the code generation phase, causing less detailed error messages.) WARNING: Although the definition of assignment implies that overlaps -between the left-hand side and the right-hand side are `safe' (e.g. -\code{a, b = b, a} swaps two variables), overlaps within the +between the left-hand side and the right-hand side are `safe' (e.g., +``\code{a, b = b, a}'' swaps two variables), overlaps \emph{within} the collection of assigned-to variables are not safe! For instance, the -following program prints \code{[0, 2]}: +following program prints ``\code{[0, 2]}'': \begin{verbatim} x = [0, 1] @@ -243,7 +282,7 @@ Deletion of a target list recursively deletes each target, from left to right. Deletion of a name removes the binding of that name (which must exist) -from the local or global name space, depending on whether the name +from the local or global namespace, depending on whether the name occurs in a \keyword{global} statement in the same code block. \stindex{global} \indexii{unbinding}{name} @@ -258,18 +297,18 @@ right type (but even this is determined by the sliced object). \stindex{print} \begin{verbatim} -print_stmt: "print" [ condition ("," condition)* [","] ] +print_stmt: "print" [ expression ("," expression)* [","] ] \end{verbatim} -\keyword{print} evaluates each condition in turn and writes the resulting +\keyword{print} evaluates each expression in turn and writes the resulting object to standard output (see below). If an object is not a string, it is first converted to a string using the rules for string conversions. The (resulting or original) string is then written. A space is written before each object is (converted and) written, unless the output system believes it is positioned at the beginning of a -line. This is the case: (1) when no characters have yet been written -to standard output; or (2) when the last character written to standard -output is \character{\\n}; or (3) when the last write operation on standard +line. This is the case (1) when no characters have yet been written +to standard output, (2) when the last character written to standard +output is \character{\\n}, or (3) when the last write operation on standard output was not a \keyword{print} statement. (In some cases it may be functional to write an empty string to standard output for this reason.) @@ -283,10 +322,9 @@ contains just the keyword \keyword{print}. \indexii{newline}{suppression} Standard output is defined as the file object named \code{stdout} -in the built-in module \module{sys}. If no such object exists, -or if it is not a writable file, a \exception{RuntimeError} exception is raised. -(The original implementation attempts to write to the system's original -standard output instead, but this is not safe, and should be fixed.) +in the built-in module \module{sys}. If no such object exists, or if +it does not have a \method{write()} method, a \exception{RuntimeError} +exception is raised. \indexii{standard}{output} \refbimodindex{sys} \ttindex{stdout} @@ -296,7 +334,7 @@ standard output instead, but this is not safe, and should be fixed.) \stindex{return} \begin{verbatim} -return_stmt: "return" [condition_list] +return_stmt: "return" [expression_list] \end{verbatim} \keyword{return} may only occur syntactically nested in a function @@ -304,14 +342,14 @@ definition, not within a nested class definition. \indexii{function}{definition} \indexii{class}{definition} -If a condition list is present, it is evaluated, else \code{None} +If an expression list is present, it is evaluated, else \code{None} is substituted. -\keyword{return} leaves the current function call with the condition +\keyword{return} leaves the current function call with the expression list (or \code{None}) as return value. When \keyword{return} passes control out of a \keyword{try} statement -with a finally clause, that finally clause is executed +with a \keyword{finally} clause, that \keyword{finally} clause is executed before really leaving the function. \kwindex{finally} @@ -319,15 +357,18 @@ before really leaving the function. \stindex{raise} \begin{verbatim} -raise_stmt: "raise" condition ["," condition ["," condition]] +raise_stmt: "raise" [expression ["," expression ["," expression]]] \end{verbatim} -\keyword{raise} evaluates its first condition, which must yield -a string, class, or instance object. If there is a second condition, +If no expressions are present, \keyword{raise} re-raises the last +expression that was raised in the current scope. + +Otherwose, \keyword{raise} evaluates its first expression, which must yield +a string, class, or instance object. If there is a second expression, this is evaluated, else \code{None} is substituted. If the first -condition is a class object, then the second condition must be an +expression is a class object, then the second expression must be an instance of that class or one of its derivatives. If the first -condition is an instance object, the second condition must be +expression is an instance object, the second expression must be \code{None}. \index{exception} \indexii{raising}{exception} @@ -339,7 +380,7 @@ exception identified by the class of the object, with the instance as its parameter (and there should be no second object, or the second object should be \code{None}). -If a third object is present, and it it not \code{None}, it should be +If a third object is present, and it is not \code{None}, it should be a traceback object (see section \ref{traceback}), and it is substituted instead of the current location as the place where the exception occurred. This is useful to re-raise an exception @@ -361,7 +402,7 @@ within that loop. \indexii{loop}{statement} It terminates the nearest enclosing loop, skipping the optional -else clause if the loop has one. +\keyword{else} clause if the loop has one. \kwindex{else} If a \keyword{for} loop is terminated by \keyword{break}, the loop control @@ -369,7 +410,7 @@ target keeps its current value. \indexii{loop control}{target} When \keyword{break} passes control out of a \keyword{try} statement -with a finally clause, that finally clause is executed +with a \keyword{finally} clause, that \keyword{finally} clause is executed before really leaving the loop. \kwindex{finally} @@ -382,45 +423,45 @@ continue_stmt: "continue" \keyword{continue} may only occur syntactically nested in a \keyword{for} or \keyword{while} loop, but not nested in a function or class definition or -\keyword{try} statement within that loop.\footnote{Except that it may -currently occur within an except clause.} +\keyword{try} statement within that loop.\footnote{It may +occur within an \keyword{except} or \keyword{else} clause. The +restriction on occurring in the \keyword{try} clause is implementer's +laziness and will eventually be lifted.} +It continues with the next cycle of the nearest enclosing loop. \stindex{for} \stindex{while} \indexii{loop}{statement} \kwindex{finally} -It continues with the next cycle of the nearest enclosing loop. - \section{The \keyword{import} statement} \label{import} \stindex{import} \begin{verbatim} -import_stmt: "import" identifier ("," identifier)* - | "from" identifier "import" identifier ("," identifier)* - | "from" identifier "import" "*" +import_stmt: "import" module ("," module)* + | "from" module "import" identifier ("," identifier)* + | "from" module "import" "*" +module: (identifier ".")* identifier \end{verbatim} Import statements are executed in two steps: (1) find a module, and initialize it if necessary; (2) define a name or names in the local -name space (of the scope where the \keyword{import} statement occurs). +namespace (of the scope where the \keyword{import} statement occurs). The first form (without \keyword{from}) repeats these steps for each -identifier in the list, the \keyword{from} form performs them once, with -the first identifier specifying the module name. +identifier in the list. The form with \keyword{from} performs step +(1) once, and then performs step (2) repeatedly. \indexii{importing}{module} \indexii{name}{binding} \kwindex{from} The system maintains a table of modules that have been initialized, -indexed by module name. (The current implementation makes this table -accessible as \code{sys.modules}.) When a module name is found in +indexed by module name. This table table +accessible as \code{sys.modules}. When a module name is found in this table, step (1) is finished. If not, a search for a module -definition is started. This first looks for a built-in module -definition, and if no built-in module if the given name is found, it -searches a user-specified list of directories for a file whose name is -the module name with extension \file{.py}. (The current -implementation uses the list of strings \code{sys.path} as the search -path; it is initialized from the shell environment variable -\envvar{PYTHONPATH}, with an installation-dependent default.) +definition is started. When a module is found, it is loaded. Details +of the module searching and loading process are implementation and +platform specific. It generally involves searching for a ``built-in'' +module with the given name and then searching a list of locations +given as \code{sys.path}. \ttindex{modules} \ttindex{sys.modules} \indexii{module}{name} @@ -447,19 +488,19 @@ When step (1) finishes without raising an exception, step (2) can begin. The first form of \keyword{import} statement binds the module name in the -local name space to the module object, and then goes on to import the -next identifier, if any. The \keyword{from} from does not bind the +local namespace to the module object, and then goes on to import the +next identifier, if any. The \keyword{from} form does not bind the module name: it goes through the list of identifiers, looks each one of them up in the module found in step (1), and binds the name in the -local name space to the object thus found. If a name is not found, +local namespace to the object thus found. If a name is not found, \exception{ImportError} is raised. If the list of identifiers is replaced by a star (\code{*}), all names defined in the module are bound, except those beginning with an underscore(\code{_}). \indexii{name}{binding} \exindex{ImportError} -Names bound by import statements may not occur in \keyword{global} -statements in the same scope. +Names bound by \keyword{import} statements may not occur in +\keyword{global} statements in the same scope. \stindex{global} The \keyword{from} form with \code{*} may only occur in a module scope. @@ -471,6 +512,21 @@ restrictions, but programs should not abuse this freedom, as future implementations may enforce them or silently change the meaning of the program.) +\strong{Hierarchical module names:}\indexiii{hierarchical}{module names} +when the module names contains one or more dots, the module search +path is carried out differently. The sequence of identifiers up to +the last dot is used to find a ``package''\index{packages}; the final +identifier is then searched inside the package. A package is +generally a subdirectory of a directory on \code{sys.path} that has a +file \file{__init__.py}.\ttindex{__init__.py} +% +[XXX Can't be bothered to spell this out right now; see the URL +http://www.python.org/doc/essays/packages.html for more details, also +about how the module search works from inside a package.] + +[XXX Also should mention __import__().] +\bifuncindex{__import__} + \section{The \keyword{global} statement} \label{global} \stindex{global} @@ -497,7 +553,8 @@ restrictions, but programs should not abuse this freedom, as future implementations may enforce them or silently change the meaning of the program.) -Note: the \keyword{global} is a directive to the parser. Therefore, it +\strong{Programmer's note:} +the \keyword{global} is a directive to the parser. It applies only to code parsed at the same time as the \keyword{global} statement. In particular, a \keyword{global} statement contained in an \keyword{exec} statement does not affect the code block \emph{containing} @@ -539,7 +596,8 @@ may add a reference to the dictionary of the built-in module \ttindex{__builtins__} \refbimodindex{__builtin__} -Hints: dynamic evaluation of expressions is supported by the built-in +\strong{Programmer's hints:} +dynamic evaluation of expressions is supported by the built-in function \function{eval()}. The built-in functions \function{globals()} and \function{locals()} return the current global and local dictionary, respectively, which may be useful to pass around |