path: root/Doc/lib/libftplib.tex

\section{\module{ftplib} ---
         FTP protocol client}

\declaremodule{standard}{ftplib}
\modulesynopsis{FTP protocol client (requires sockets).}


This module defines the class \class{FTP} and a few related items.
The \class{FTP} class implements the client side of the FTP
protocol.\indexii{FTP}{protocol}  You can use this to write Python
programs that perform a variety of automated FTP jobs, such as
mirroring other ftp servers.  It is also used by the module
\refmodule{urllib} to handle URLs that use FTP.  For more information
on FTP (File Transfer Protocol), see Internet \rfc{959}.

Here's a sample session using the \module{ftplib} module:

\begin{verbatim}
>>> from ftplib import FTP
>>> ftp = FTP('ftp.cwi.nl')   # connect to host, default port
>>> ftp.login()               # user anonymous, passwd user@hostname
>>> ftp.retrlines('LIST')     # list directory contents
total 24418
drwxrwsr-x   5 ftp-usr  pdmaint     1536 Mar 20 09:48 .
dr-xr-srwt 105 ftp-usr  pdmaint     1536 Mar 21 14:32 ..
-rw-r--r--   1 ftp-usr  pdmaint     5305 Mar 20 09:48 INDEX
 .
 .
 .
>>> ftp.retrbinary('RETR README', open('README', 'wb').write)
'226 Transfer complete.'
>>> ftp.quit()
\end{verbatim}

The module defines the following items:

\begin{classdesc}{FTP}{\optional{host\optional{, user\optional{,
                       passwd\optional{, acct}}}}}
Return a new instance of the \class{FTP} class.  When
\var{host} is given, the method call \code{connect(\var{host})} is
made.  When \var{user} is given, additionally the method call
\code{login(\var{user}, \var{passwd}, \var{acct})} is made (where
\var{passwd} and \var{acct} default to the empty string when not given).
\end{classdesc}

\begin{datadesc}{all_errors}
The set of all exceptions (as a tuple) that methods of \class{FTP}
instances may raise as a result of problems with the FTP connection
(as opposed to programming errors made by the caller).  This set
includes the four exceptions listed below as well as
\exception{socket.error} and \exception{IOError}.
\end{datadesc}

\begin{excdesc}{error_reply}
Exception raised when an unexpected reply is received from the server.
\end{excdesc}

\begin{excdesc}{error_temp}
Exception raised when an error code in the range 400--499 is received.
\end{excdesc}

\begin{excdesc}{error_perm}
Exception raised when an error code in the range 500--599 is received.
\end{excdesc}

\begin{excdesc}{error_proto}
Exception raised when a reply is received from the server that does
not begin with a digit in the range 1--5.
\end{excdesc}


\begin{seealso}
  \seemodule{netrc}{Parser for the \file{.netrc} file format.  The file
                    \file{.netrc} is typically used by FTP clients to
                    load user authentication information before prompting
                    the user.}
  \seetext{The file \file{Tools/scripts/ftpmirror.py}\index{ftpmirror.py}
           in the Python source distribution is a script that can mirror
           FTP sites, or portions thereof, using the \module{ftplib} module.
           It can be used as an extended example that applies this module.}
\end{seealso}


\subsection{FTP Objects \label{ftp-objects}}

Several methods are available in two flavors: one for handling text
files and another for binary files.  These are named for the command
which is used followed by \samp{lines} for the text version or
\samp{binary} for the binary version.

\class{FTP} instances have the following methods:

\begin{methoddesc}{set_debuglevel}{level}
Set the instance's debugging level.  This controls the amount of
debugging output printed.  The default, \code{0}, produces no
debugging output.  A value of \code{1} produces a moderate amount of
debugging output, generally a single line per request.  A value of
\code{2} or higher produces the maximum amount of debugging output,
logging each line sent and received on the control connection.
\end{methoddesc}

\begin{methoddesc}{connect}{host\optional{, port}}
Connect to the given host and port.  The default port number is \code{21}, as
specified by the FTP protocol specification.  It is rarely needed to
specify a different port number.  This function should be called only
once for each instance; it should not be called at all if a host was
given when the instance was created.  All other methods can only be
used after a connection has been made.
\end{methoddesc}

\begin{methoddesc}{getwelcome}{}
Return the welcome message sent by the server in reply to the initial
connection.  (This message sometimes contains disclaimers or help
information that may be relevant to the user.)
\end{methoddesc}

\begin{methoddesc}{login}{\optional{user\optional{, passwd\optional{, acct}}}}
Log in as the given \var{user}.  The \var{passwd} and \var{acct}
parameters are optional and default to the empty string.  If no
\var{user} is specified, it defaults to \code{'anonymous'}.  If
\var{user} is \code{'anonymous'}, the default \var{passwd} is
\samp{\var{realuser}@\var{host}} where \var{realuser} is the real user
name (glanced from the \envvar{LOGNAME} or \envvar{USER} environment
variable) and \var{host} is the hostname as returned by
\function{socket.gethostname()}.  This function should be called only
once for each instance, after a connection has been established; it
should not be called at all if a host and user were given when the
instance was created.  Most FTP commands are only allowed after the
client has logged in.
\end{methoddesc}

\begin{methoddesc}{abort}{}
Abort a file transfer that is in progress.  Using this does not always
work, but it's worth a try.
\end{methoddesc}

\begin{methoddesc}{sendcmd}{command}
Send a simple command string to the server and return the response
string.
\end{methoddesc}

\begin{methoddesc}{voidcmd}{command}
Send a simple command string to the server and handle the response.
Return nothing if a response code in the range 200--299 is received.
Raise an exception otherwise.
\end{methoddesc}

\begin{methoddesc}{retrbinary}{command,
    callback\optional{, maxblocksize\optional{, rest}}}
Retrieve a file in binary transfer mode.  \var{command} should be an
appropriate \samp{RETR} command, i.e.\ \code{'RETR \var{filename}'}.
The \var{callback} function is called for each block of data received,
with a single string argument giving the data block.
The optional \var{maxblocksize} argument specifies the maximum chunk size to
read on the low-level socket object created to do the actual transfer
(which will also be the largest size of the data blocks passed to
\var{callback}).  A reasonable default is chosen. \var{rest} means the
same thing as in the \method{transfercmd()} method.
\end{methoddesc}

\begin{methoddesc}{retrlines}{command\optional{, callback}}
Retrieve a file or directory listing in \ASCII{} transfer mode.
\var{command} should be an appropriate \samp{RETR} command (see
\method{retrbinary()} or a \samp{LIST} command (usually just the string
\code{'LIST'}).  The \var{callback} function is called for each line,
with the trailing CRLF stripped.  The default \var{callback} prints
the line to \code{sys.stdout}.
\end{methoddesc}

\begin{methoddesc}{set_pasv}{boolean}
Enable ``passive'' mode if \var{boolean} is true, other disable
passive mode.
\end{methoddesc}

\begin{methoddesc}{storbinary}{command, file, blocksize}
Store a file in binary transfer mode.  \var{command} should be an
appropriate \samp{STOR} command, i.e.\ \code{"STOR \var{filename}"}.
\var{file} is an open file object which is read until \EOF{} using its
\method{read()} method in blocks of size \var{blocksize} to provide the
data to be stored.
\end{methoddesc}

\begin{methoddesc}{storlines}{command, file}
Store a file in \ASCII{} transfer mode.  \var{command} should be an
appropriate \samp{STOR} command (see \method{storbinary()}).  Lines are
read until \EOF{} from the open file object \var{file} using its
\method{readline()} method to provide the data to be stored.
\end{methoddesc}

\begin{methoddesc}{transfercmd}{cmd\optional{, rest}}
Initiate a transfer over the data connection.  If the transfer is
active, send a \samp{PORT} command and the transfer command specified
by \var{cmd}, and accept the connection.  If the server is passive,
send a \samp{PASV} command, connect to it, and start the transfer
command.  Either way, return the socket for the connection.

If optional \var{rest} is given, a \samp{REST} command is
sent to the server, passing \var{rest} as an argument.  \var{rest} is
usually a byte offset into the requested file, telling the server to
restart sending the file's bytes at the requested offset, skipping
over the initial bytes.  Note however that RFC
959 requires only that \var{rest} be a string containing characters
in the printable range from ASCII code 33 to ASCII code 126.  The
\method{transfercmd()} method, therefore, converts
\var{rest} to a string, but no check is
performed on the string's contents.  If the server does
not recognize the \samp{REST} command, an
\exception{error_reply} exception will be raised.  If this happens,
simply call \method{transfercmd()} without a \var{rest} argument.
\end{methoddesc}

\begin{methoddesc}{ntransfercmd}{cmd\optional{, rest}}
Like \method{transfercmd()}, but returns a tuple of the data
connection and the expected size of the data.  If the expected size
could not be computed, \code{None} will be returned as the expected
size.  \var{cmd} and \var{rest} means the same thing as in
\method{transfercmd()}.
\end{methoddesc}

\begin{methoddesc}{nlst}{argument\optional{, \ldots}}
Return a list of files as returned by the \samp{NLST} command.  The
optional \var{argument} is a directory to list (default is the current
server directory).  Multiple arguments can be used to pass
non-standard options to the \samp{NLST} command.
\end{methoddesc}

\begin{methoddesc}{dir}{argument\optional{, \ldots}}
Produce a directory listing as returned by the \samp{LIST} command,
printing it to standard output.  The optional \var{argument} is a
directory to list (default is the current server directory).  Multiple
arguments can be used to pass non-standard options to the \samp{LIST}
command.  If the last argument is a function, it is used as a
\var{callback} function as for \method{retrlines()}; the default
prints to \code{sys.stdout}.  This method returns \code{None}.
\end{methoddesc}

\begin{methoddesc}{rename}{fromname, toname}
Rename file \var{fromname} on the server to \var{toname}.
\end{methoddesc}

\begin{methoddesc}{delete}{filename}
Remove the file named \var{filename} from the server.  If successful,
returns the text of the response, otherwise raises
\exception{error_perm} on permission errors or
\exception{error_reply} on other errors.
\end{methoddesc}

\begin{methoddesc}{cwd}{pathname}
Set the current directory on the server.
\end{methoddesc}

\begin{methoddesc}{mkd}{pathname}
Create a new directory on the server.
\end{methoddesc}

\begin{methoddesc}{pwd}{}
Return the pathname of the current directory on the server.
\end{methoddesc}

\begin{methoddesc}{rmd}{dirname}
Remove the directory named \var{dirname} on the server.
\end{methoddesc}

\begin{methoddesc}{size}{filename}
Request the size of the file named \var{filename} on the server.  On
success, the size of the file is returned as an integer, otherwise
\code{None} is returned.  Note that the \samp{SIZE} command is not 
standardized, but is supported by many common server implementations.
\end{methoddesc}

\begin{methoddesc}{quit}{}
Send a \samp{QUIT} command to the server and close the connection.
This is the ``polite'' way to close a connection, but it may raise an
exception of the server reponds with an error to the
\samp{QUIT} command.  This implies a call to the \method{close()}
method which renders the \class{FTP} instance useless for subsequent
calls (see below).
\end{methoddesc}

\begin{methoddesc}{close}{}
Close the connection unilaterally.  This should not be applied to an
already closed connection (e.g.\ after a successful call to
\method{quit()}.  After this call the \class{FTP} instance should not
be used any more (i.e., after a call to \method{close()} or
\method{quit()} you cannot reopen the connection by issuing another
\method{login()} method).
\end{methoddesc}