diff options
| author | Larry Knox <lrknox@hdfgroup.org> | 2017-12-01 18:41:26 (GMT) |
|---|---|---|
| committer | Larry Knox <lrknox@hdfgroup.org> | 2017-12-01 18:41:26 (GMT) |
| commit | b8c6b68c35fa2be23ef488a1d81097ff3ed55000 (patch) | |
| tree | c3429ee577e454526c8704d66a84f0c45b7959a1 /config/cmake_ext_mod | |
| parent | 23a702e7bad93fc4f14eab07678c75d276e2d0ad (diff) | |
| parent | 60f76980aab92f0e0730170b99a2363acd3c97fa (diff) | |
| download | hdf5-hdf5-1_8_20.zip hdf5-hdf5-1_8_20.tar.gz hdf5-hdf5-1_8_20.tar.bz2 | |
Merge pull request #811 in HDFFV/hdf5 from hdf5_1_8_20 to 1.8/masterhdf5-1_8_20
* commit '60f76980aab92f0e0730170b99a2363acd3c97fa': (108 commits)
Update version numbers and remove empty sections in RELEASE.txt.
Restore line 1154: C2Cppfunction_map.mht to HTML_EXTRA_FILES.
Update version for 1.8.20 release.
Fixed documentation warnings
HDFFV-10329 Correct LINK INTERFACE and VS20013 compile
Switch default build mode from development to production. Increment version string to pre2.
Add RELEASE.txt note for HDFFV-10274. (cherry picked from commit f7a7d0a00613cba997212fa8032091629a678797)
Initialize hid_t variables in test_Attr_bug9. (cherry picked from commit 97bc393449f3fe02c5992872ab2842e12f611ef0)
Fix HDFFV-10274. When deleting all (or almost all) of the messages in an object header chunk, where the total amount deleted was greater than 64K, an error would occur due to an off by one error in the code that handled that case. Fixed this and added a test case. (cherry picked from commit 1b2c2ca9a6a7d7e1fcd5c3302e203f2e2dabf0af)
Fix linking of libs
Changed file path to relative.
iAdd NAG to supported compilers in RELEASE.txt.
Add description to RELEASE.txt for HDFFV-10323
Correct issue number
Set version to 1.8.20-pre1
Update supported and tested platforms in RELEASE.txt.
HDFFV-10321 Merge from 1.8
Incremented lib file .so numbers: revision for all except c++ for code change; current incremented, revision and age set to 0 for c++ due to symbols added and removed.
updated issues related to Fortran
Incremented lib file .so numbers: revision for all except c++ for dcode change; current incremented, revision and age set to 0 for c++ due to symbols added and removed.
...
Diffstat (limited to 'config/cmake_ext_mod')
| -rw-r--r-- | config/cmake_ext_mod/CheckTypeSize.cmake | 2 | ||||
| -rw-r--r-- | config/cmake_ext_mod/ConfigureChecks.cmake | 2 | ||||
| -rw-r--r-- | config/cmake_ext_mod/FindMPI.cmake | 1760 | ||||
| -rw-r--r-- | config/cmake_ext_mod/FindMPI/fortranparam_mpi.f90.in | 4 | ||||
| -rw-r--r-- | config/cmake_ext_mod/FindMPI/libver_mpi.c | 19 | ||||
| -rw-r--r-- | config/cmake_ext_mod/FindMPI/libver_mpi.f90.in | 7 | ||||
| -rw-r--r-- | config/cmake_ext_mod/FindMPI/mpiver.f90.in | 10 | ||||
| -rw-r--r-- | config/cmake_ext_mod/FindMPI/test_mpi.c | 37 | ||||
| -rw-r--r-- | config/cmake_ext_mod/FindMPI/test_mpi.f90.in | 6 | ||||
| -rw-r--r-- | config/cmake_ext_mod/FindSZIP.cmake | 2 | ||||
| -rw-r--r-- | config/cmake_ext_mod/GetTimeOfDayTest.cpp | 1 | ||||
| -rw-r--r-- | config/cmake_ext_mod/HDFLibMacros.cmake | 12 | ||||
| -rw-r--r-- | config/cmake_ext_mod/HDFMacros.cmake | 2 | ||||
| -rw-r--r-- | config/cmake_ext_mod/HDFTests.c | 1 | ||||
| -rw-r--r-- | config/cmake_ext_mod/HDFUseFortran.cmake | 2 | ||||
| -rw-r--r-- | config/cmake_ext_mod/grepTest.cmake | 8 | ||||
| -rw-r--r-- | config/cmake_ext_mod/runTest.cmake | 30 |
17 files changed, 1377 insertions, 528 deletions
diff --git a/config/cmake_ext_mod/CheckTypeSize.cmake b/config/cmake_ext_mod/CheckTypeSize.cmake index 116560a..c14c2f2 100644 --- a/config/cmake_ext_mod/CheckTypeSize.cmake +++ b/config/cmake_ext_mod/CheckTypeSize.cmake @@ -8,7 +8,7 @@ # distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases. # If you do not have access to either file, you may request a copy from # help@hdfgroup.org. - +# # # Check if the type exists and determine size of type. if the type # exists, the size will be stored to the variable. diff --git a/config/cmake_ext_mod/ConfigureChecks.cmake b/config/cmake_ext_mod/ConfigureChecks.cmake index 7db1ec3..56d45f9 100644 --- a/config/cmake_ext_mod/ConfigureChecks.cmake +++ b/config/cmake_ext_mod/ConfigureChecks.cmake @@ -8,7 +8,7 @@ # distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases. # If you do not have access to either file, you may request a copy from # help@hdfgroup.org. - +# #----------------------------------------------------------------------------- # Include all the necessary files for macros #----------------------------------------------------------------------------- diff --git a/config/cmake_ext_mod/FindMPI.cmake b/config/cmake_ext_mod/FindMPI.cmake index ff1ead2..8084472 100644 --- a/config/cmake_ext_mod/FindMPI.cmake +++ b/config/cmake_ext_mod/FindMPI.cmake @@ -4,78 +4,222 @@ # FindMPI # ------- # -# Find a Message Passing Interface (MPI) implementation +# Find a Message Passing Interface (MPI) implementation. # # The Message Passing Interface (MPI) is a library used to write # high-performance distributed-memory parallel applications, and is # typically deployed on a cluster. MPI is a standard interface (defined -# by the MPI forum) for which many implementations are available. All -# of them have somewhat different include paths, libraries to link -# against, etc., and this module tries to smooth out those differences. +# by the MPI forum) for which many implementations are available. # -# Variables -# ^^^^^^^^^ +# Variables for using MPI +# ^^^^^^^^^^^^^^^^^^^^^^^ +# +# The module exposes the components ``C``, ``CXX``, ``MPICXX`` and ``Fortran``. +# Each of these controls the various MPI languages to search for. +# The difference between ``CXX`` and ``MPICXX`` is that ``CXX`` refers to the +# MPI C API being usable from C++, whereas ``MPICXX`` refers to the MPI-2 C++ API +# that was removed again in MPI-3. +# +# Depending on the enabled components the following variables will be set: +# +# ``MPI_FOUND`` +# Variable indicating that MPI settings for all requested languages have been found. +# If no components are specified, this is true if MPI settings for all enabled languages +# were detected. Note that the ``MPICXX`` component does not affect this variable. +# ``MPI_VERSION`` +# Minimal version of MPI detected among the requested languages, or all enabled languages +# if no components were specified. # # This module will set the following variables per language in your -# project, where <lang> is one of C, CXX, or Fortran: +# project, where ``<lang>`` is one of C, CXX, or Fortran: # -# :: +# ``MPI_<lang>_FOUND`` +# Variable indicating the MPI settings for ``<lang>`` were found and that +# simple MPI test programs compile with the provided settings. +# ``MPI_<lang>_COMPILER`` +# MPI compiler for ``<lang>`` if such a program exists. +# ``MPI_<lang>_COMPILE_OPTIONS`` +# Compilation options for MPI programs in ``<lang>``, given as a :ref:`;-list <CMake Language Lists>`. +# ``MPI_<lang>_COMPILE_DEFINITIONS`` +# Compilation definitions for MPI programs in ``<lang>``, given as a :ref:`;-list <CMake Language Lists>`. +# ``MPI_<lang>_INCLUDE_DIRS`` +# Include path(s) for MPI header. +# ``MPI_<lang>_LINK_FLAGS`` +# Linker flags for MPI programs. +# ``MPI_<lang>_LIBRARIES`` +# All libraries to link MPI programs against. # -# MPI_<lang>_FOUND TRUE if FindMPI found MPI flags for <lang> -# MPI_<lang>_COMPILER MPI Compiler wrapper for <lang> -# MPI_<lang>_COMPILE_FLAGS Compilation flags for MPI programs -# MPI_<lang>_INCLUDE_PATH Include path(s) for MPI header -# MPI_<lang>_LINK_FLAGS Linking flags for MPI programs -# MPI_<lang>_LIBRARIES All libraries to link MPI programs against +# Additionally, the following :prop_tgt:`IMPORTED` targets are defined: # -# Additionally, FindMPI sets the following variables for running MPI -# programs from the command line: +# ``MPI::MPI_<lang>`` +# Target for using MPI from ``<lang>``. # -# :: +# The following variables indicating which bindings are present will be defined: # -# MPIEXEC Executable for running MPI programs -# MPIEXEC_NUMPROC_FLAG Flag to pass to MPIEXEC before giving -# it the number of processors to run on -# MPIEXEC_PREFLAGS Flags to pass to MPIEXEC directly -# before the executable to run. -# MPIEXEC_POSTFLAGS Flags to pass to MPIEXEC after other flags +# ``MPI_MPICXX_FOUND`` +# Variable indicating whether the MPI-2 C++ bindings are present (introduced in MPI-2, removed with MPI-3). +# ``MPI_Fortran_HAVE_F77_HEADER`` +# True if the Fortran 77 header ``mpif.h`` is available. +# ``MPI_Fortran_HAVE_F90_MODULE`` +# True if the Fortran 90 module ``mpi`` can be used for accessing MPI (MPI-2 and higher only). +# ``MPI_Fortran_HAVE_F08_MODULE`` +# True if the Fortran 2008 ``mpi_f08`` is available to MPI programs (MPI-3 and higher only). # -# Usage -# ^^^^^ +# If possible, the MPI version will be determined by this module. The facilities to detect the MPI version +# were introduced with MPI-1.2, and therefore cannot be found for older MPI versions. # -# To use this module, simply call FindMPI from a CMakeLists.txt file, or -# run ``find_package(MPI)``, then run CMake. If you are happy with the -# auto-detected configuration for your language, then you're done. If -# not, you have two options: +# ``MPI_<lang>_VERSION_MAJOR`` +# Major version of MPI implemented for ``<lang>`` by the MPI distribution. +# ``MPI_<lang>_VERSION_MINOR`` +# Minor version of MPI implemented for ``<lang>`` by the MPI distribution. +# ``MPI_<lang>_VERSION`` +# MPI version implemented for ``<lang>`` by the MPI distribution. # -# :: +# Note that there's no variable for the C bindings being accessible through ``mpi.h``, since the MPI standards +# always have required this binding to work in both C and C++ code. +# +# For running MPI programs, the module sets the following variables +# +# ``MPIEXEC_EXECUTABLE`` +# Executable for running MPI programs, if such exists. +# ``MPIEXEC_NUMPROC_FLAG`` +# Flag to pass to ``mpiexec`` before giving it the number of processors to run on. +# ``MPIEXEC_MAX_NUMPROCS`` +# Number of MPI processors to utilize. Defaults to the number +# of processors detected on the host system. +# ``MPIEXEC_PREFLAGS`` +# Flags to pass to ``mpiexec`` directly before the executable to run. +# ``MPIEXEC_POSTFLAGS`` +# Flags to pass to ``mpiexec`` after other flags. +# +# Variables for locating MPI +# ^^^^^^^^^^^^^^^^^^^^^^^^^^ +# +# This module performs a three step search for an MPI implementation: +# +# 1. Check if the compiler has MPI support built-in. This is the case if the user passed a +# compiler wrapper as ``CMAKE_<LANG>_COMPILER`` or if they're on a Cray system. +# 2. Attempt to find an MPI compiler wrapper and determine the compiler information from it. +# 3. Try to find an MPI implementation that does not ship such a wrapper by guessing settings. +# Currently, only Microsoft MPI and MPICH2 on Windows are supported. +# +# For controlling the second step, the following variables may be set: +# +# ``MPI_<lang>_COMPILER`` +# Search for the specified compiler wrapper and use it. +# ``MPI_<lang>_COMPILER_FLAGS`` +# Flags to pass to the MPI compiler wrapper during interrogation. Some compiler wrappers +# support linking debug or tracing libraries if a specific flag is passed and this variable +# may be used to obtain them. +# ``MPI_COMPILER_FLAGS`` +# Used to initialize ``MPI_<lang>_COMPILER_FLAGS`` if no language specific flag has been given. +# Empty by default. +# ``MPI_EXECUTABLE_SUFFIX`` +# A suffix which is appended to all names that are being looked for. For instance you may set this +# to ``.mpich`` or ``.openmpi`` to prefer the one or the other on Debian and its derivatives. +# +# In order to control the guessing step, the following variable may be set: +# +# ``MPI_GUESS_LIBRARY_NAME`` +# Valid values are ``MSMPI`` and ``MPICH2``. If set, only the given library will be searched for. +# By default, ``MSMPI`` will be preferred over ``MPICH2`` if both are available. +# This also sets ``MPI_SKIP_COMPILER_WRAPPER`` to ``true``, which may be overridden. +# +# Each of the search steps may be skipped with the following control variables: +# +# ``MPI_ASSUME_NO_BUILTIN_MPI`` +# If true, the module assumes that the compiler itself does not provide an MPI implementation and +# skips to step 2. +# ``MPI_SKIP_COMPILER_WRAPPER`` +# If true, no compiler wrapper will be searched for. +# ``MPI_SKIP_GUESSING`` +# If true, the guessing step will be skipped. # -# 1. Set MPI_<lang>_COMPILER to the MPI wrapper (mpicc, etc.) of your -# choice and reconfigure. FindMPI will attempt to determine all the -# necessary variables using THAT compiler's compile and link flags. -# 2. If this fails, or if your MPI implementation does not come with -# a compiler wrapper, then set both MPI_<lang>_LIBRARIES and -# MPI_<lang>_INCLUDE_PATH. You may also set any other variables -# listed above, but these two are required. This will circumvent -# autodetection entirely. +# Additionally, the following control variable is available to change search behavior: # -# When configuration is successful, ``MPI_<lang>_COMPILER`` will be set to -# the compiler wrapper for <lang>, if it was found. ``MPI_<lang>_FOUND`` -# and other variables above will be set if any MPI implementation was -# found for <lang>, regardless of whether a compiler was found. +# ``MPI_CXX_SKIP_MPICXX`` +# Add some definitions that will disable the MPI-2 C++ bindings. +# Currently supported are MPICH, Open MPI, Platform MPI and derivatives thereof, +# for example MVAPICH or Intel MPI. # -# When using ``MPIEXEC`` to execute MPI applications, you should typically -# use all of the ``MPIEXEC`` flags as follows: +# If the find procedure fails for a variable ``MPI_<lang>_WORKS``, then the settings detected by or passed to +# the module did not work and even a simple MPI test program failed to compile. +# +# If all of these parameters were not sufficient to find the right MPI implementation, a user may +# disable the entire autodetection process by specifying both a list of libraries in ``MPI_<lang>_LIBRARIES`` +# and a list of include directories in ``MPI_<lang>_ADDITIONAL_INCLUDE_DIRS``. +# Any other variable may be set in addition to these two. The module will then validate the MPI settings and store the +# settings in the cache. +# +# Cache variables for MPI +# ^^^^^^^^^^^^^^^^^^^^^^^ +# +# The variable ``MPI_<lang>_INCLUDE_DIRS`` will be assembled from the following variables. +# For C and CXX: +# +# ``MPI_<lang>_HEADER_DIR`` +# Location of the ``mpi.h`` header on disk. +# +# For Fortran: +# +# ``MPI_Fortran_F77_HEADER_DIR`` +# Location of the Fortran 77 header ``mpif.h``, if it exists. +# ``MPI_Fortran_MODULE_DIR`` +# Location of the ``mpi`` or ``mpi_f08`` modules, if available. +# +# For all languages the following variables are additionally considered: +# +# ``MPI_<lang>_ADDITIONAL_INCLUDE_DIRS`` +# A :ref:`;-list <CMake Language Lists>` of paths needed in addition to the normal include directories. +# ``MPI_<include_name>_INCLUDE_DIR`` +# Path variables for include folders referred to by ``<include_name>``. +# ``MPI_<lang>_ADDITIONAL_INCLUDE_VARS`` +# A :ref:`;-list <CMake Language Lists>` of ``<include_name>`` that will be added to the include locations of ``<lang>``. +# +# The variable ``MPI_<lang>_LIBRARIES`` will be assembled from the following variables: +# +# ``MPI_<lib_name>_LIBRARY`` +# The location of a library called ``<lib_name>`` for use with MPI. +# ``MPI_<lang>_LIB_NAMES`` +# A :ref:`;-list <CMake Language Lists>` of ``<lib_name>`` that will be added to the include locations of ``<lang>``. +# +# Usage of mpiexec +# ^^^^^^^^^^^^^^^^ +# +# When using ``MPIEXEC_EXECUTABLE`` to execute MPI applications, you should typically +# use all of the ``MPIEXEC_EXECUTABLE`` flags as follows: # # :: # -# ${MPIEXEC} ${MPIEXEC_NUMPROC_FLAG} PROCS +# ${MPIEXEC_EXECUTABLE} ${MPIEXEC_NUMPROC_FLAG} ${MPIEXEC_MAX_NUMPROCS} # ${MPIEXEC_PREFLAGS} EXECUTABLE ${MPIEXEC_POSTFLAGS} ARGS # -# where ``PROCS`` is the number of processors on which to execute the -# program, ``EXECUTABLE`` is the MPI program, and ``ARGS`` are the arguments to +# where ``EXECUTABLE`` is the MPI program, and ``ARGS`` are the arguments to # pass to the MPI program. # +# Advanced variables for using MPI +# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +# +# The module can perform some advanced feature detections upon explicit request. +# +# **Important notice:** The following checks cannot be performed without *executing* an MPI test program. +# Consider the special considerations for the behavior of :command:`try_run` during cross compilation. +# Moreover, running an MPI program can cause additional issues, like a firewall notification on some systems. +# You should only enable these detections if you absolutely need the information. +# +# If the following variables are set to true, the respective search will be performed: +# +# ``MPI_DETERMINE_Fortran_CAPABILITIES`` +# Determine for all available Fortran bindings what the values of ``MPI_SUBARRAYS_SUPPORTED`` and +# ``MPI_ASYNC_PROTECTS_NONBLOCKING`` are and make their values available as ``MPI_Fortran_<binding>_SUBARRAYS`` +# and ``MPI_Fortran_<binding>_ASYNCPROT``, where ``<binding>`` is one of ``F77_HEADER``, ``F90_MODULE`` and +# ``F08_MODULE``. +# ``MPI_DETERMINE_LIBRARY_VERSION`` +# For each language, find the output of ``MPI_Get_library_version`` and make it available as ``MPI_<lang>_LIBRARY_VERSION``. +# This information is usually tied to the runtime component of an MPI implementation and might differ depending on ``<lang>``. +# Note that the return value is entirely implementation defined. This information might be used to identify +# the MPI vendor and for example pick the correct one of multiple third party binaries that matches the MPI vendor. +# # Backward Compatibility # ^^^^^^^^^^^^^^^^^^^^^^ # @@ -84,54 +228,62 @@ # # :: # -# MPI_FOUND MPI_COMPILER MPI_LIBRARY -# MPI_COMPILE_FLAGS MPI_INCLUDE_PATH MPI_EXTRA_LIBRARY -# MPI_LINK_FLAGS MPI_LIBRARIES +# MPI_COMPILER MPI_LIBRARY MPI_EXTRA_LIBRARY +# MPI_COMPILE_FLAGS MPI_INCLUDE_PATH MPI_LINK_FLAGS +# MPI_LIBRARIES # # In new projects, please use the ``MPI_<lang>_XXX`` equivalents. +# Additionally, the following variables are deprecated: +# +# ``MPI_<lang>_COMPILE_FLAGS`` +# Use ``MPI_<lang>_COMPILE_OPTIONS`` and ``MPI_<lang>_COMPILE_DEFINITIONS`` instead. +# ``MPI_<lang>_INCLUDE_PATH`` +# For consumption use ``MPI_<lang>_INCLUDE_DIRS`` and for specifying folders use ``MPI_<lang>_ADDITIONAL_INCLUDE_DIRS`` instead. +# ``MPIEXEC`` +# Use ``MPIEXEC_EXECUTABLE`` instead. + +cmake_policy(PUSH) +cmake_policy(SET CMP0057 NEW) # if IN_LIST # include this to handle the QUIETLY and REQUIRED arguments include(${CMAKE_ROOT}/Modules/FindPackageHandleStandardArgs.cmake) include(GetPrerequisites) -# -# This part detects MPI compilers, attempting to wade through the mess of compiler names in -# a sensible way. -# -# The compilers are detected in this order: -# -# 1. Try to find the most generic available MPI compiler, as this is usually set up by -# cluster admins. e.g., if plain old mpicc is available, we'll use it and assume it's -# the right compiler. -# -# 2. If a generic mpicc is NOT found, then we attempt to find one that matches -# CMAKE_<lang>_COMPILER_ID. e.g. if you are using XL compilers, we'll try to find mpixlc -# and company, but not mpiicc. This hopefully prevents toolchain mismatches. -# -# If you want to force a particular MPI compiler other than what we autodetect (e.g. if you -# want to compile regular stuff with GNU and parallel stuff with Intel), you can always set -# your favorite MPI_<lang>_COMPILER explicitly and this stuff will be ignored. -# - -# Start out with the generic MPI compiler names, as these are most commonly used. -set(_MPI_C_COMPILER_NAMES mpicc mpcc mpicc_r mpcc_r mpicc.bat) -set(_MPI_CXX_COMPILER_NAMES mpicxx mpiCC mpcxx mpCC mpic++ mpc++ - mpicxx_r mpiCC_r mpcxx_r mpCC_r mpic++_r mpc++_r - mpicxx.bat) -set(_MPI_Fortran_COMPILER_NAMES mpif95 mpif95_r mpf95 mpf95_r +# Generic compiler names +set(_MPI_C_GENERIC_COMPILER_NAMES mpicc mpcc mpicc_r mpcc_r) +set(_MPI_CXX_GENERIC_COMPILER_NAMES mpicxx mpiCC mpcxx mpCC mpic++ mpc++ + mpicxx_r mpiCC_r mpcxx_r mpCC_r mpic++_r mpc++_r) +set(_MPI_Fortran_GENERIC_COMPILER_NAMES mpif95 mpif95_r mpf95 mpf95_r mpif90 mpif90_r mpf90 mpf90_r - mpif77 mpif77_r mpf77 mpf77_r) + mpif77 mpif77_r mpf77 mpf77_r + mpifc) # GNU compiler names set(_MPI_GNU_C_COMPILER_NAMES mpigcc mpgcc mpigcc_r mpgcc_r) -set(_MPI_GNU_CXX_COMPILER_NAMES mpig++ mpg++ mpig++_r mpg++_r) +set(_MPI_GNU_CXX_COMPILER_NAMES mpig++ mpg++ mpig++_r mpg++_r mpigxx) set(_MPI_GNU_Fortran_COMPILER_NAMES mpigfortran mpgfortran mpigfortran_r mpgfortran_r mpig77 mpig77_r mpg77 mpg77_r) -# Intel MPI compiler names -set(_MPI_Intel_C_COMPILER_NAMES mpiicc mpiicc.bat) -set(_MPI_Intel_CXX_COMPILER_NAMES mpiicpc mpiicxx mpiic++ mpiiCC mpiicpc.bat) -set(_MPI_Intel_Fortran_COMPILER_NAMES mpiifort mpiif95 mpiif90 mpiif77 mpiifort.bat) +# Intel MPI compiler names on Windows +if(WIN32) + list(APPEND _MPI_C_GENERIC_COMPILER_NAMES mpicc.bat) + list(APPEND _MPI_CXX_GENERIC_COMPILER_NAMES mpicxx.bat) + list(APPEND _MPI_Fortran_GENERIC_COMPILER_NAMES mpifc.bat) + + # Intel MPI compiler names + set(_MPI_Intel_C_COMPILER_NAMES mpiicc.bat) + set(_MPI_Intel_CXX_COMPILER_NAMES mpiicpc.bat) + set(_MPI_Intel_Fortran_COMPILER_NAMES mpiifort.bat mpif77.bat mpif90.bat) + + # Intel MPI compiler names for MSMPI + set(_MPI_MSVC_C_COMPILER_NAMES mpicl.bat) + set(_MPI_MSVC_CXX_COMPILER_NAMES mpicl.bat) +else() + # Intel compiler names + set(_MPI_Intel_C_COMPILER_NAMES mpiicc) + set(_MPI_Intel_CXX_COMPILER_NAMES mpiicpc mpiicxx mpiic++) + set(_MPI_Intel_Fortran_COMPILER_NAMES mpiifort mpiif95 mpiif90 mpiif77) +endif() # PGI compiler names set(_MPI_PGI_C_COMPILER_NAMES mpipgcc mppgcc) @@ -147,512 +299,1127 @@ set(_MPI_XL_Fortran_COMPILER_NAMES mpixlf95 mpixlf95_r mpxlf95 mpxlf95 mpixlf77 mpixlf77_r mpxlf77 mpxlf77_r mpixlf mpixlf_r mpxlf mpxlf_r) -# append vendor-specific compilers to the list if we either don't know the compiler id, -# or if we know it matches the regular compiler. -foreach (lang C CXX Fortran) - foreach (id GNU Intel PGI XL) - if (NOT CMAKE_${lang}_COMPILER_ID OR CMAKE_${lang}_COMPILER_ID STREQUAL id) - list(APPEND _MPI_${lang}_COMPILER_NAMES ${_MPI_${id}_${lang}_COMPILER_NAMES}) +# Prepend vendor-specific compiler wrappers to the list. If we don't know the compiler, +# attempt all of them. +# By attempting vendor-specific compiler names first, we should avoid situations where the compiler wrapper +# stems from a proprietary MPI and won't know which compiler it's being used for. For instance, Intel MPI +# controls its settings via the I_MPI_CC environment variables if the generic name is being used. +# If we know which compiler we're working with, we can use the most specialized wrapper there is in order to +# pick up the right settings for it. +foreach (LANG IN ITEMS C CXX Fortran) + set(_MPI_${LANG}_COMPILER_NAMES "") + foreach (id IN ITEMS GNU Intel MSVC PGI XL) + if (NOT CMAKE_${LANG}_COMPILER_ID OR CMAKE_${LANG}_COMPILER_ID STREQUAL id) + list(APPEND _MPI_${LANG}_COMPILER_NAMES ${_MPI_${id}_${LANG}_COMPILER_NAMES}${MPI_EXECUTABLE_SUFFIX}) endif() - unset(_MPI_${id}_${lang}_COMPILER_NAMES) # clean up the namespace here + unset(_MPI_${id}_${LANG}_COMPILER_NAMES) endforeach() + list(APPEND _MPI_${LANG}_COMPILER_NAMES ${_MPI_${LANG}_GENERIC_COMPILER_NAMES}${MPI_EXECUTABLE_SUFFIX}) + unset(_MPI_${LANG}_GENERIC_COMPILER_NAMES) endforeach() +# Names to try for mpiexec +# Only mpiexec commands are guaranteed to behave as described in the standard, +# mpirun commands are not covered by the standard in any way whatsoever. +# lamexec is the executable for LAM/MPI, srun is for SLURM or Open MPI with SLURM support. +# srun -n X <executable> is however a valid command, so it behaves 'like' mpiexec. +set(_MPIEXEC_NAMES_BASE mpiexec mpiexec.hydra mpiexec.mpd mpirun lamexec srun) -# Names to try for MPI exec -set(_MPI_EXEC_NAMES mpiexec mpirun lamexec srun) - -# Grab the path to MPI from the registry if we're on windows. -set(_MPI_PREFIX_PATH) -if(WIN32) - # MSMPI - file(TO_CMAKE_PATH "$ENV{MSMPI_BIN}" msmpi_bin_path) # The default path ends with a '\' and doesn't mix with ';' when appending. - list(APPEND _MPI_PREFIX_PATH "${msmpi_bin_path}") - unset(msmpi_bin_path) - list(APPEND _MPI_PREFIX_PATH "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\MPI;InstallRoot]/Bin") - list(APPEND _MPI_PREFIX_PATH "$ENV{MSMPI_INC}/..") # The SDK is installed separately from the runtime - # MPICH - list(APPEND _MPI_PREFIX_PATH "[HKEY_LOCAL_MACHINE\\SOFTWARE\\MPICH\\SMPD;binary]/..") - list(APPEND _MPI_PREFIX_PATH "[HKEY_LOCAL_MACHINE\\SOFTWARE\\MPICH2;Path]") - list(APPEND _MPI_PREFIX_PATH "$ENV{ProgramW6432}/MPICH2/") -endif() - -# Build a list of prefixes to search for MPI. -foreach(SystemPrefixDir ${CMAKE_SYSTEM_PREFIX_PATH}) - foreach(MpiPackageDir ${_MPI_PREFIX_PATH}) - if(EXISTS ${SystemPrefixDir}/${MpiPackageDir}) - list(APPEND _MPI_PREFIX_PATH "${SystemPrefixDir}/${MpiPackageDir}") - endif() - endforeach() +unset(_MPIEXEC_NAMES) +foreach(_MPIEXEC_NAME IN LISTS _MPIEXEC_NAMES_BASE) + list(APPEND _MPIEXEC_NAMES "${_MPIEXEC_NAME}${MPI_EXECUTABLE_SUFFIX}") endforeach() +unset(_MPIEXEC_NAMES_BASE) -function (_mpi_check_compiler compiler options cmdvar resvar) +function (_MPI_check_compiler LANG QUERY_FLAG OUTPUT_VARIABLE RESULT_VARIABLE) + if(DEFINED MPI_${LANG}_COMPILER_FLAGS) + separate_arguments(_MPI_COMPILER_WRAPPER_OPTIONS NATIVE_COMMAND "${MPI_${LANG}_COMPILER_FLAGS}") + else() + separate_arguments(_MPI_COMPILER_WRAPPER_OPTIONS NATIVE_COMMAND "${MPI_COMPILER_FLAGS}") + endif() execute_process( - COMMAND "${compiler}" ${options} - OUTPUT_VARIABLE cmdline OUTPUT_STRIP_TRAILING_WHITESPACE - ERROR_VARIABLE cmdline ERROR_STRIP_TRAILING_WHITESPACE - RESULT_VARIABLE success) - # Intel MPI 5.0.1 will return a zero return code even when the - # argument to the MPI compiler wrapper is unknown. Attempt to - # catch this case. - if(cmdline MATCHES "undefined reference" OR cmdline MATCHES "unrecognized") - set(success 255 ) - endif() - set(${cmdvar} "${cmdline}" PARENT_SCOPE) - set(${resvar} "${success}" PARENT_SCOPE) + COMMAND ${MPI_${LANG}_COMPILER} ${_MPI_COMPILER_WRAPPER_OPTIONS} ${QUERY_FLAG} + OUTPUT_VARIABLE WRAPPER_OUTPUT OUTPUT_STRIP_TRAILING_WHITESPACE + ERROR_VARIABLE WRAPPER_OUTPUT ERROR_STRIP_TRAILING_WHITESPACE + RESULT_VARIABLE WRAPPER_RETURN) + # Some compiler wrappers will yield spurious zero return values, for example + # Intel MPI tolerates unknown arguments and if the MPI wrappers loads a shared + # library that has invalid or missing version information there would be warning + # messages emitted by ld.so in the compiler output. In either case, we'll treat + # the output as invalid. + if("${WRAPPER_OUTPUT}" MATCHES "undefined reference|unrecognized|need to set|no version information available") + set(WRAPPER_RETURN 255) + endif() + # Ensure that no error output might be passed upwards. + if(NOT WRAPPER_RETURN EQUAL 0) + unset(WRAPPER_OUTPUT) + endif() + set(${OUTPUT_VARIABLE} "${WRAPPER_OUTPUT}" PARENT_SCOPE) + set(${RESULT_VARIABLE} "${WRAPPER_RETURN}" PARENT_SCOPE) endfunction() -# -# interrogate_mpi_compiler(lang try_libs) -# -# Attempts to extract compiler and linker args from an MPI compiler. The arguments set -# by this function are: -# -# MPI_<lang>_INCLUDE_PATH MPI_<lang>_LINK_FLAGS MPI_<lang>_FOUND -# MPI_<lang>_COMPILE_FLAGS MPI_<lang>_LIBRARIES -# -# MPI_<lang>_COMPILER must be set beforehand to the absolute path to an MPI compiler for -# <lang>. Additionally, MPI_<lang>_INCLUDE_PATH and MPI_<lang>_LIBRARIES may be set -# to skip autodetection. -# -# If try_libs is TRUE, this will also attempt to find plain MPI libraries in the usual -# way. In general, this is not as effective as interrogating the compilers, as it -# ignores language-specific flags and libraries. However, some MPI implementations -# (Windows implementations) do not have compiler wrappers, so this approach must be used. -# -function (interrogate_mpi_compiler lang try_libs) - # MPI_${lang}_NO_INTERROGATE will be set to a compiler name when the *regular* compiler was - # discovered to be the MPI compiler. This happens on machines like the Cray XE6 that use - # modules to set cc, CC, and ftn to the MPI compilers. If the user force-sets another MPI - # compiler, MPI_${lang}_COMPILER won't be equal to MPI_${lang}_NO_INTERROGATE, and we'll - # inspect that compiler anew. This allows users to set new compilers w/o rm'ing cache. - string(COMPARE NOTEQUAL "${MPI_${lang}_NO_INTERROGATE}" "${MPI_${lang}_COMPILER}" interrogate) - - # If MPI is set already in the cache, don't bother with interrogating the compiler. - if (interrogate AND ((NOT MPI_${lang}_INCLUDE_PATH) OR (NOT MPI_${lang}_LIBRARIES))) - if (MPI_${lang}_COMPILER) - # Check whether the -showme:compile option works. This indicates that we have either OpenMPI - # or a newer version of LAM-MPI, and implies that -showme:link will also work. - _mpi_check_compiler("${MPI_${lang}_COMPILER}" "-showme:compile" MPI_COMPILE_CMDLINE MPI_COMPILER_RETURN) - if (MPI_COMPILER_RETURN EQUAL 0) - # If we appear to have -showme:compile, then we should - # also have -showme:link. Try it. - execute_process( - COMMAND ${MPI_${lang}_COMPILER} -showme:link - OUTPUT_VARIABLE MPI_LINK_CMDLINE OUTPUT_STRIP_TRAILING_WHITESPACE - ERROR_VARIABLE MPI_LINK_CMDLINE ERROR_STRIP_TRAILING_WHITESPACE - RESULT_VARIABLE MPI_COMPILER_RETURN) - - if (MPI_COMPILER_RETURN EQUAL 0) - # We probably have -showme:incdirs and -showme:libdirs as well, - # so grab that while we're at it. - execute_process( - COMMAND ${MPI_${lang}_COMPILER} -showme:incdirs - OUTPUT_VARIABLE MPI_INCDIRS OUTPUT_STRIP_TRAILING_WHITESPACE - ERROR_VARIABLE MPI_INCDIRS ERROR_STRIP_TRAILING_WHITESPACE) - - execute_process( - COMMAND ${MPI_${lang}_COMPILER} -showme:libdirs - OUTPUT_VARIABLE MPI_LIBDIRS OUTPUT_STRIP_TRAILING_WHITESPACE - ERROR_VARIABLE MPI_LIBDIRS ERROR_STRIP_TRAILING_WHITESPACE) +function (_MPI_interrogate_compiler lang) + unset(MPI_COMPILE_CMDLINE) + unset(MPI_LINK_CMDLINE) + + unset(MPI_COMPILE_OPTIONS_WORK) + unset(MPI_COMPILE_DEFINITIONS_WORK) + unset(MPI_INCLUDE_DIRS_WORK) + unset(MPI_LINK_FLAGS_WORK) + unset(MPI_LIB_NAMES_WORK) + unset(MPI_LIB_FULLPATHS_WORK) + + # Check whether the -showme:compile option works. This indicates that we have either Open MPI + # or a newer version of LAM/MPI, and implies that -showme:link will also work. + # Open MPI also supports -show, but separates linker and compiler information + _MPI_check_compiler(${LANG} "-showme:compile" MPI_COMPILE_CMDLINE MPI_COMPILER_RETURN) + if (MPI_COMPILER_RETURN EQUAL 0) + _MPI_check_compiler(${LANG} "-showme:link" MPI_LINK_CMDLINE MPI_COMPILER_RETURN) + + if (NOT MPI_COMPILER_RETURN EQUAL 0) + unset(MPI_COMPILE_CMDLINE) + endif() + endif() - else() - # reset things here if something went wrong. - set(MPI_COMPILE_CMDLINE) - set(MPI_LINK_CMDLINE) - endif() - endif () + # MPICH and MVAPICH offer -compile-info and -link-info. + # For modern versions, both do the same as -show. However, for old versions, they do differ + # when called for mpicxx and mpif90 and it's necessary to use them over -show in order to find the + # removed MPI C++ bindings. + if (NOT MPI_COMPILER_RETURN EQUAL 0) + _MPI_check_compiler(${LANG} "-compile-info" MPI_COMPILE_CMDLINE MPI_COMPILER_RETURN) + + if (MPI_COMPILER_RETURN EQUAL 0) + _MPI_check_compiler(${LANG} "-link-info" MPI_LINK_CMDLINE MPI_COMPILER_RETURN) - # Older versions of LAM-MPI have "-showme". Try to find that. if (NOT MPI_COMPILER_RETURN EQUAL 0) - _mpi_check_compiler("${MPI_${lang}_COMPILER}" "-showme" MPI_COMPILE_CMDLINE MPI_COMPILER_RETURN) + unset(MPI_COMPILE_CMDLINE) endif() + endif() + endif() - # MVAPICH uses -compile-info and -link-info. Try them. - if (NOT MPI_COMPILER_RETURN EQUAL 0) - _mpi_check_compiler("${MPI_${lang}_COMPILER}" "-compile-info" MPI_COMPILE_CMDLINE MPI_COMPILER_RETURN) - - # If we have compile-info, also have link-info. - if (MPI_COMPILER_RETURN EQUAL 0) - execute_process( - COMMAND ${MPI_${lang}_COMPILER} -link-info - OUTPUT_VARIABLE MPI_LINK_CMDLINE OUTPUT_STRIP_TRAILING_WHITESPACE - ERROR_VARIABLE MPI_LINK_CMDLINE ERROR_STRIP_TRAILING_WHITESPACE - RESULT_VARIABLE MPI_COMPILER_RETURN) - endif() + # MPICH, MVAPICH2 and Intel MPI just use "-show". Open MPI also offers this, but the + # -showme commands are more specialized. + if (NOT MPI_COMPILER_RETURN EQUAL 0) + _MPI_check_compiler(${LANG} "-show" MPI_COMPILE_CMDLINE MPI_COMPILER_RETURN) + endif() - # make sure we got compile and link. Reset vars if something's wrong. - if (NOT MPI_COMPILER_RETURN EQUAL 0) - set(MPI_COMPILE_CMDLINE) - set(MPI_LINK_CMDLINE) - endif() - endif() + # Older versions of LAM/MPI have "-showme". Open MPI also supports this. + # Unknown to MPICH, MVAPICH and Intel MPI. + if (NOT MPI_COMPILER_RETURN EQUAL 0) + _MPI_check_compiler(${LANG} "-showme" MPI_COMPILE_CMDLINE MPI_COMPILER_RETURN) + endif() - # MPICH just uses "-show". Try it. - if (NOT MPI_COMPILER_RETURN EQUAL 0) - _mpi_check_compiler("${MPI_${lang}_COMPILER}" "-show" MPI_COMPILE_CMDLINE MPI_COMPILER_RETURN) - endif() + if (NOT (MPI_COMPILER_RETURN EQUAL 0) OR NOT (DEFINED MPI_COMPILE_CMDLINE)) + # Cannot interrogate this compiler, so exit. + set(MPI_${LANG}_WRAPPER_FOUND FALSE PARENT_SCOPE) + return() + endif() + unset(MPI_COMPILER_RETURN) - if (MPI_COMPILER_RETURN EQUAL 0) - # We have our command lines, but we might need to copy MPI_COMPILE_CMDLINE - # into MPI_LINK_CMDLINE, if we didn't find the link line. - if (NOT MPI_LINK_CMDLINE) - set(MPI_LINK_CMDLINE ${MPI_COMPILE_CMDLINE}) - endif() + # We have our command lines, but we might need to copy MPI_COMPILE_CMDLINE + # into MPI_LINK_CMDLINE, if we didn't find the link line. + if (NOT DEFINED MPI_LINK_CMDLINE) + set(MPI_LINK_CMDLINE "${MPI_COMPILE_CMDLINE}") + endif() + + # At this point, we obtained some output from a compiler wrapper that works. + # We'll now try to parse it into variables with meaning to us. + if("${LANG}" STREQUAL "Fortran") + # Some MPICH-1 and MVAPICH-1 versions return a three command answer for Fortran, consisting + # out of a symlink command for mpif.h, the actual compiler command and a deletion of the + # created symlink. We need to detect that case, remember the include path and drop the + # symlink/deletion operation to obtain the link/compile lines we'd usually expect. + if("${MPI_COMPILE_CMDLINE}" MATCHES "^ln -s ([^\" ]+|\"[^\"]+\") mpif.h") + get_filename_component(MPI_INCLUDE_DIRS_WORK "${CMAKE_MATCH_1}" DIRECTORY) + string(REGEX REPLACE "^ln -s ([^\" ]+|\"[^\"]+\") mpif.h\n" "" MPI_COMPILE_CMDLINE "${MPI_COMPILE_CMDLINE}") + string(REGEX REPLACE "^ln -s ([^\" ]+|\"[^\"]+\") mpif.h\n" "" MPI_LINK_CMDLINE "${MPI_LINK_CMDLINE}") + string(REGEX REPLACE "\nrm -f mpif.h$" "" MPI_COMPILE_CMDLINE "${MPI_COMPILE_CMDLINE}") + string(REGEX REPLACE "\nrm -f mpif.h$" "" MPI_LINK_CMDLINE "${MPI_LINK_CMDLINE}") + endif() + endif() + + # The Intel MPI wrapper on Linux will emit some objcopy commands after its compile command + # if -static_mpi was passed to the wrapper. To avoid spurious matches, we need to drop these lines. + if(UNIX) + string(REGEX REPLACE "(^|\n)objcopy[^\n]+(\n|$)" "" MPI_COMPILE_CMDLINE "${MPI_COMPILE_CMDLINE}") + string(REGEX REPLACE "(^|\n)objcopy[^\n]+(\n|$)" "" MPI_LINK_CMDLINE "${MPI_LINK_CMDLINE}") + endif() + + # Extract compile options from the compile command line. + string(REGEX MATCHALL "(^| )-f([^\" ]+|\"[^\"]+\")" MPI_ALL_COMPILE_OPTIONS "${MPI_COMPILE_CMDLINE}") + + foreach(_MPI_COMPILE_OPTION IN LISTS MPI_ALL_COMPILE_OPTIONS) + string(REGEX REPLACE "^ " "" _MPI_COMPILE_OPTION "${_MPI_COMPILE_OPTION}") + # Ignore -fstack-protector directives: These occur on MPICH and MVAPICH when the libraries + # themselves were built with this flag. However, this flag is unrelated to using MPI, and + # we won't match the accompanying --param-ssp-size and -Wp,-D_FORTIFY_SOURCE flags and therefore + # produce inconsistent results with the regularly flags. + # Similarly, aliasing flags do not belong into our flag array. + if(NOT "${_MPI_COMPILE_OPTION}" MATCHES "^-f(stack-protector|(no-|)strict-aliasing|PI[CE]|pi[ce])") + list(APPEND MPI_COMPILE_OPTIONS_WORK "${_MPI_COMPILE_OPTION}") + endif() + endforeach() + + # Same deal, with the definitions. We also treat arguments passed to the preprocessor directly. + string(REGEX MATCHALL "(^| )(-Wp,|-Xpreprocessor |)[-/]D([^\" ]+|\"[^\"]+\")" MPI_ALL_COMPILE_DEFINITIONS "${MPI_COMPILE_CMDLINE}") + + foreach(_MPI_COMPILE_DEFINITION IN LISTS MPI_ALL_COMPILE_DEFINITIONS) + string(REGEX REPLACE "^ ?(-Wp,|-Xpreprocessor )?[-/]D" "" _MPI_COMPILE_DEFINITION "${_MPI_COMPILE_DEFINITION}") + string(REPLACE "\"" "" _MPI_COMPILE_DEFINITION "${_MPI_COMPILE_DEFINITION}") + if(NOT "${_MPI_COMPILE_DEFINITION}" MATCHES "^_FORTIFY_SOURCE.*") + list(APPEND MPI_COMPILE_DEFINITIONS_WORK "${_MPI_COMPILE_DEFINITION}") + endif() + endforeach() + + # Extract include paths from compile command line + string(REGEX MATCHALL "(^| )[-/]I([^\" ]+|\"[^\"]+\")" MPI_ALL_INCLUDE_PATHS "${MPI_COMPILE_CMDLINE}") + + # If extracting failed to work, we'll try using -showme:incdirs. + if (NOT MPI_ALL_INCLUDE_PATHS) + _MPI_check_compiler(${LANG} "-showme:incdirs" MPI_INCDIRS_CMDLINE MPI_INCDIRS_COMPILER_RETURN) + if(MPI_INCDIRS_COMPILER_RETURN) + separate_arguments(MPI_ALL_INCLUDE_PATHS NATIVE_COMMAND "${MPI_INCDIRS_CMDLINE}") + endif() + endif() + + foreach(_MPI_INCLUDE_PATH IN LISTS MPI_ALL_INCLUDE_PATHS) + string(REGEX REPLACE "^ ?[-/]I" "" _MPI_INCLUDE_PATH "${_MPI_INCLUDE_PATH}") + string(REPLACE "\"" "" _MPI_INCLUDE_PATH "${_MPI_INCLUDE_PATH}") + get_filename_component(_MPI_INCLUDE_PATH "${_MPI_INCLUDE_PATH}" REALPATH) + list(APPEND MPI_INCLUDE_DIRS_WORK "${_MPI_INCLUDE_PATH}") + endforeach() + + # Extract linker paths from the link command line + string(REGEX MATCHALL "(^| )(-Wl,|-Xlinker |)(-L|[/-]LIBPATH:|[/-]libpath:)([^\" ]+|\"[^\"]+\")" MPI_ALL_LINK_PATHS "${MPI_LINK_CMDLINE}") + + # If extracting failed to work, we'll try using -showme:libdirs. + if (NOT MPI_ALL_LINK_PATHS) + _MPI_check_compiler(${LANG} "-showme:libdirs" MPI_LIBDIRS_CMDLINE MPI_LIBDIRS_COMPILER_RETURN) + if(MPI_LIBDIRS_COMPILER_RETURN) + separate_arguments(MPI_ALL_LINK_PATHS NATIVE_COMMAND "${MPI_LIBDIRS_CMDLINE}") + endif() + endif() + + foreach(_MPI_LPATH IN LISTS MPI_ALL_LINK_PATHS) + string(REGEX REPLACE "^ ?(-Wl,|-Xlinker )?(-L|[/-]LIBPATH:|[/-]libpath:)" "" _MPI_LPATH "${_MPI_LPATH}") + string(REPLACE "\"" "" _MPI_LPATH "${_MPI_LPATH}") + get_filename_component(_MPI_LPATH "${_MPI_LPATH}" REALPATH) + list(APPEND MPI_LINK_DIRECTORIES_WORK "${_MPI_LPATH}") + endforeach() + + # Extract linker flags from the link command line + string(REGEX MATCHALL "(^| )(-Wl,|-Xlinker )([^\" ]+|\"[^\"]+\")" MPI_ALL_LINK_FLAGS "${MPI_LINK_CMDLINE}") + + foreach(_MPI_LINK_FLAG IN LISTS MPI_ALL_LINK_FLAGS) + string(STRIP "${_MPI_LINK_FLAG}" _MPI_LINK_FLAG) + # MPI might be marked to build with non-executable stacks but this should not propagate. + if (NOT "${_MPI_LINK_FLAG}" MATCHES "(-Wl,|-Xlinker )-z,noexecstack") + if (MPI_LINK_FLAGS_WORK) + string(APPEND MPI_LINK_FLAGS_WORK " ${_MPI_LINK_FLAG}") else() - message(STATUS "Unable to determine MPI from MPI driver ${MPI_${lang}_COMPILER}") - set(MPI_COMPILE_CMDLINE) - set(MPI_LINK_CMDLINE) + set(MPI_LINK_FLAGS_WORK "${_MPI_LINK_FLAG}") endif() + endif() + endforeach() - # Here, we're done with the interrogation part, and we'll try to extract args we care - # about from what we learned from the compiler wrapper scripts. - - # If interrogation came back with something, extract our variable from the MPI command line - if (MPI_COMPILE_CMDLINE OR MPI_LINK_CMDLINE) - # Extract compile flags from the compile command line. - string(REGEX MATCHALL "(^| )-[Df]([^\" ]+|\"[^\"]+\")" MPI_ALL_COMPILE_FLAGS "${MPI_COMPILE_CMDLINE}") - set(MPI_COMPILE_FLAGS_WORK) + # Extract the set of libraries to link against from the link command + # line + string(REGEX MATCHALL "(^| )-l([^\" ]+|\"[^\"]+\")" MPI_LIBNAMES "${MPI_LINK_CMDLINE}") - foreach(FLAG ${MPI_ALL_COMPILE_FLAGS}) - string(REGEX REPLACE "^ " "" FLAG ${FLAG}) - if (MPI_COMPILE_FLAGS_WORK) - set(MPI_COMPILE_FLAGS_WORK "${MPI_COMPILE_FLAGS_WORK} ${FLAG}") - else() - set(MPI_COMPILE_FLAGS_WORK ${FLAG}) - endif() - endforeach() + foreach(_MPI_LIB_NAME IN LISTS MPI_LIBNAMES) + string(REGEX REPLACE "^ ?-l" "" _MPI_LIB_NAME "${_MPI_LIB_NAME}") + string(REPLACE "\"" "" _MPI_LIB_NAME "${_MPI_LIB_NAME}") + get_filename_component(_MPI_LIB_PATH "${_MPI_LIB_NAME}" DIRECTORY) + if(NOT "${_MPI_LIB_PATH}" STREQUAL "") + list(APPEND MPI_LIB_FULLPATHS_WORK "${_MPI_LIB_NAME}") + else() + list(APPEND MPI_LIB_NAMES_WORK "${_MPI_LIB_NAME}") + endif() + endforeach() - # Extract include paths from compile command line - string(REGEX MATCHALL "(^| )-I([^\" ]+|\"[^\"]+\")" MPI_ALL_INCLUDE_PATHS "${MPI_COMPILE_CMDLINE}") - set(MPI_INCLUDE_PATH_WORK) + if(WIN32) + # A compiler wrapper on Windows will just have the name of the + # library to link on its link line, potentially with a full path + string(REGEX MATCHALL "(^| )([^\" ]+\\.lib|\"[^\"]+\\.lib\")" MPI_LIBNAMES "${MPI_LINK_CMDLINE}") + foreach(_MPI_LIB_NAME IN LISTS MPI_LIBNAMES) + string(REGEX REPLACE "^ " "" _MPI_LIB_NAME "${_MPI_LIB_NAME}") + string(REPLACE "\"" "" _MPI_LIB_NAME "${_MPI_LIB_NAME}") + get_filename_component(_MPI_LIB_PATH "${_MPI_LIB_NAME}" DIRECTORY) + if(NOT "${_MPI_LIB_PATH}" STREQUAL "") + list(APPEND MPI_LIB_FULLPATHS_WORK "${_MPI_LIB_NAME}") + else() + list(APPEND MPI_LIB_NAMES_WORK "${_MPI_LIB_NAME}") + endif() + endforeach() + else() + # On UNIX platforms, archive libraries can be given with full path. + string(REGEX MATCHALL "(^| )([^\" ]+\\.a|\"[^\"]+\\.a\")" MPI_LIBFULLPATHS "${MPI_LINK_CMDLINE}") + foreach(_MPI_LIB_NAME IN LISTS MPI_LIBFULLPATHS) + string(REGEX REPLACE "^ " "" _MPI_LIB_NAME "${_MPI_LIB_NAME}") + string(REPLACE "\"" "" _MPI_LIB_NAME "${_MPI_LIB_NAME}") + get_filename_component(_MPI_LIB_PATH "${_MPI_LIB_NAME}" DIRECTORY) + if(NOT "${_MPI_LIB_PATH}" STREQUAL "") + list(APPEND MPI_LIB_FULLPATHS_WORK "${_MPI_LIB_NAME}") + else() + list(APPEND MPI_LIB_NAMES_WORK "${_MPI_LIB_NAME}") + endif() + endforeach() + endif() - foreach(IPATH ${MPI_ALL_INCLUDE_PATHS}) - string(REGEX REPLACE "^ ?-I" "" IPATH ${IPATH}) - string(REPLACE "//" "/" IPATH ${IPATH}) - string(REPLACE "\"" "" IPATH ${IPATH}) - file(TO_CMAKE_PATH "${IPATH}" IPATH) - list(APPEND MPI_INCLUDE_PATH_WORK ${IPATH}) - endforeach() + # An MPI compiler wrapper could have its MPI libraries in the implictly + # linked directories of the compiler itself. + if(DEFINED CMAKE_${LANG}_IMPLICIT_LINK_DIRECTORIES) + list(APPEND MPI_LINK_DIRECTORIES_WORK "${CMAKE_${LANG}_IMPLICIT_LINK_DIRECTORIES}") + endif() - # try using showme:incdirs if extracting didn't work. - if (NOT MPI_INCLUDE_PATH_WORK) - set(MPI_INCLUDE_PATH_WORK ${MPI_INCDIRS}) - separate_arguments(MPI_INCLUDE_PATH_WORK) - endif() + # Determine full path names for all of the libraries that one needs + # to link against in an MPI program + unset(MPI_PLAIN_LIB_NAMES_WORK) + foreach(_MPI_LIB_NAME IN LISTS MPI_LIB_NAMES_WORK) + get_filename_component(_MPI_PLAIN_LIB_NAME "${_MPI_LIB_NAME}" NAME_WE) + list(APPEND MPI_PLAIN_LIB_NAMES_WORK "${_MPI_PLAIN_LIB_NAME}") + find_library(MPI_${_MPI_PLAIN_LIB_NAME}_LIBRARY + NAMES "${_MPI_LIB_NAME}" "lib${_MPI_LIB_NAME}" + HINTS ${MPI_LINK_DIRECTORIES_WORK} + DOC "Location of the ${_MPI_PLAIN_LIB_NAME} library for MPI" + ) + mark_as_advanced(MPI_${_MPI_PLAIN_LIB_NAME}_LIBRARY) + endforeach() - # If all else fails, just search for mpi.h in the normal include paths. - if (NOT MPI_INCLUDE_PATH_WORK) - set(MPI_HEADER_PATH "MPI_HEADER_PATH-NOTFOUND" CACHE FILEPATH "Cleared" FORCE) - find_path(MPI_HEADER_PATH mpi.h - HINTS ${_MPI_BASE_DIR} ${_MPI_PREFIX_PATH} - PATH_SUFFIXES include) - set(MPI_INCLUDE_PATH_WORK ${MPI_HEADER_PATH}) - endif() + # Deal with the libraries given with full path next + unset(MPI_DIRECT_LIB_NAMES_WORK) + foreach(_MPI_LIB_FULLPATH IN LISTS MPI_LIB_FULLPATHS_WORK) + get_filename_component(_MPI_PLAIN_LIB_NAME "${_MPI_LIB_FULLPATH}" NAME_WE) + get_filename_component(_MPI_LIB_NAME "${_MPI_LIB_FULLPATH}" NAME) + get_filename_component(_MPI_LIB_PATH "${_MPI_LIB_FULLPATH}" DIRECTORY) + list(APPEND MPI_DIRECT_LIB_NAMES_WORK "${_MPI_PLAIN_LIB_NAME}") + find_library(MPI_${_MPI_PLAIN_LIB_NAME}_LIBRARY + NAMES "${_MPI_LIB_NAME}" + HINTS ${_MPI_LIB_PATH} + DOC "Location of the ${_MPI_PLAIN_LIB_NAME} library for MPI" + ) + mark_as_advanced(MPI_${_MPI_PLAIN_LIB_NAME}_LIBRARY) + endforeach() + if(MPI_DIRECT_LIB_NAMES_WORK) + set(MPI_PLAIN_LIB_NAMES_WORK "${MPI_DIRECT_LIB_NAMES_WORK};${MPI_PLAIN_LIB_NAMES_WORK}") + endif() - # Extract linker paths from the link command line - string(REGEX MATCHALL "(^| |-Wl,)(-L|/LIBPATH:)([^\" ]+|\"[^\"]+\")" MPI_ALL_LINK_PATHS "${MPI_LINK_CMDLINE}") - set(MPI_LINK_PATH) - foreach(LPATH ${MPI_ALL_LINK_PATHS}) - string(REGEX REPLACE "^(| |-Wl,)(-L|/LIBPATH:)" "" LPATH ${LPATH}) - string(REPLACE "//" "/" LPATH ${LPATH}) - list(APPEND MPI_LINK_PATH ${LPATH}) - endforeach() + # MPI might require pthread to work. The above mechanism wouldn't detect it, but we need to + # link it in that case. -lpthread is covered by the normal library treatment on the other hand. + if("${MPI_COMPILE_CMDLINE}" MATCHES "-pthread") + list(APPEND MPI_COMPILE_OPTIONS_WORK "-pthread") + if(MPI_LINK_FLAGS_WORK) + string(APPEND MPI_LINK_FLAGS_WORK " -pthread") + else() + set(MPI_LINK_FLAGS_WORK "-pthread") + endif() + endif() - # try using showme:libdirs if extracting didn't work. - if (NOT MPI_LINK_PATH) - set(MPI_LINK_PATH ${MPI_LIBDIRS}) - separate_arguments(MPI_LINK_PATH) - endif() + # If we found MPI, set up all of the appropriate cache entries + if(NOT MPI_${LANG}_COMPILE_OPTIONS) + set(MPI_${LANG}_COMPILE_OPTIONS ${MPI_COMPILE_OPTIONS_WORK} CACHE STRING "MPI ${LANG} compilation options" FORCE) + endif() + if(NOT MPI_${LANG}_COMPILE_DEFINITIONS) + set(MPI_${LANG}_COMPILE_DEFINITIONS ${MPI_COMPILE_DEFINITIONS_WORK} CACHE STRING "MPI ${LANG} compilation definitions" FORCE) + endif() + if(NOT MPI_${LANG}_ADDITIONAL_INCLUDE_DIRS) + set(MPI_${LANG}_ADDITIONAL_INCLUDE_DIRS ${MPI_INCLUDE_DIRS_WORK} CACHE STRING "MPI ${LANG} additional include directories" FORCE) + endif() + if(NOT MPI_${LANG}_LINK_FLAGS) + set(MPI_${LANG}_LINK_FLAGS ${MPI_LINK_FLAGS_WORK} CACHE STRING "MPI ${LANG} linker flags" FORCE) + endif() + if(NOT MPI_${LANG}_LIB_NAMES) + set(MPI_${LANG}_LIB_NAMES ${MPI_PLAIN_LIB_NAMES_WORK} CACHE STRING "MPI ${LANG} libraries to link against" FORCE) + endif() + set(MPI_${LANG}_WRAPPER_FOUND TRUE PARENT_SCOPE) +endfunction() - # Extract linker flags from the link command line - string(REGEX MATCHALL "(^| )(-Wl,|-Xlinker )([^\" ]+|\"[^\"]+\")" MPI_ALL_LINK_FLAGS "${MPI_LINK_CMDLINE}") - set(MPI_LINK_FLAGS_WORK) - foreach(FLAG ${MPI_ALL_LINK_FLAGS}) - string(REGEX REPLACE "^ " "" FLAG ${FLAG}) - if (MPI_LINK_FLAGS_WORK) - set(MPI_LINK_FLAGS_WORK "${MPI_LINK_FLAGS_WORK} ${FLAG}") - else() - set(MPI_LINK_FLAGS_WORK ${FLAG}) - endif() - endforeach() +function(_MPI_guess_settings LANG) + set(MPI_GUESS_FOUND FALSE) + # Currently only MSMPI and MPICH2 on Windows are supported, so we can skip this search if we're not targeting that. + if(WIN32) + # MSMPI + + # The environment variables MSMPI_INC and MSMPILIB32/64 are the only ways of locating the MSMPI_SDK, + # which is installed separately from the runtime. Thus it's possible to have mpiexec but not MPI headers + # or import libraries and vice versa. + if(NOT MPI_GUESS_LIBRARY_NAME OR "${MPI_GUESS_LIBRARY_NAME}" STREQUAL "MSMPI") + # We first attempt to locate the msmpi.lib. Should be find it, we'll assume that the MPI present is indeed + # Microsoft MPI. + if("${CMAKE_SIZEOF_VOID_P}" EQUAL 8) + set(MPI_MSMPI_LIB_PATH "$ENV{MSMPI_LIB64}") + set(MPI_MSMPI_INC_PATH_EXTRA "$ENV{MSMPI_INC}/x64") + else() + set(MPI_MSMPI_LIB_PATH "$ENV{MSMPI_LIB32}") + set(MPI_MSMPI_INC_PATH_EXTRA "$ENV{MSMPI_INC}/x86") + endif() - # Extract the set of libraries to link against from the link command - # line - string(REGEX MATCHALL "(^| )-l([^\" ]+|\"[^\"]+\")" MPI_LIBNAMES "${MPI_LINK_CMDLINE}") - if(WIN32) - # The intel wrappers on windows link against static versions of the MPI libraries. - # The static libraries are simply listed on the command line without -l. - # For instance: " icl ... impi.lib " - string(REGEX MATCHALL "(^| )([^\" ]+)\\.lib" tmp "${MPI_LINK_CMDLINE}") - list(APPEND MPI_LIBNAMES ${tmp}) + find_library(MPI_msmpi_LIBRARY + NAMES msmpi + HINTS ${MPI_MSMPI_LIB_PATH} + DOC "Location of the msmpi library for Microsoft MPI") + mark_as_advanced(MPI_msmpi_LIBRARY) + + if(MPI_msmpi_LIBRARY) + # Next, we attempt to locate the MPI header. Note that for Fortran we know that mpif.h is a way + # MSMPI can be used and therefore that header has to be present. + if(NOT MPI_${LANG}_ADDITIONAL_INCLUDE_DIRS) + get_filename_component(MPI_MSMPI_INC_DIR "$ENV{MSMPI_INC}" REALPATH) + set(MPI_${LANG}_ADDITIONAL_INCLUDE_DIRS "${MPI_MSMPI_INC_DIR}" CACHE STRING "MPI ${LANG} additional include directories" FORCE) + unset(MPI_MSMPI_INC_DIR) endif() - # add the compiler implicit directories because some compilers - # such as the intel compiler have libraries that show up - # in the showme list that can only be found in the implicit - # link directories of the compiler. - if (DEFINED CMAKE_${lang}_IMPLICIT_LINK_DIRECTORIES) - set(MPI_LINK_PATH "${MPI_LINK_PATH};${CMAKE_${lang}_IMPLICIT_LINK_DIRECTORIES}") - endif () - - # Determine full path names for all of the libraries that one needs - # to link against in an MPI program - foreach(LIB ${MPI_LIBNAMES}) - string(REGEX REPLACE "^ ?-l" "" LIB ${LIB}) - if(WIN32) - string(REGEX REPLACE "\\.lib$" "" LIB ${LIB}) + # For MSMPI, one can compile the MPI module by building the mpi.f90 shipped with the MSMPI SDK, + # thus it might be present or provided by the user. Figuring out which is supported is done later on. + # The PGI Fortran compiler for instance ships a prebuilt set of modules in its own include folder. + # Should a user be employing PGI or have built its own set and provided it via cache variables, the + # splitting routine would have located the module files. + + # For C and C++, we're done here (MSMPI does not ship the MPI-2 C++ bindings) - however, for Fortran + # we need some extra library to glue Fortran support together: + # MSMPI ships 2-4 Fortran libraries, each for different Fortran compiler behaviors. The library names + # ending with a c are using the cdecl calling convention, whereas those ending with an s are for Fortran + # implementations using stdcall. Therefore, the 64-bit MSMPI only ships those ending in 'c', whereas the 32-bit + # has both variants available. + # The second difference is the last but one letter, if it's an e(nd), the length of a string argument is + # passed by the Fortran compiler after all other arguments on the parameter list, if it's an m(ixed), + # it's passed immediately after the string address. + + # To summarize: + # - msmpifec: CHARACTER length passed after the parameter list and using cdecl calling convention + # - msmpifmc: CHARACTER length passed directly after string address and using cdecl calling convention + # - msmpifes: CHARACTER length passed after the parameter list and using stdcall calling convention + # - msmpifms: CHARACTER length passed directly after string address and using stdcall calling convention + # 32-bit MSMPI ships all four libraries, 64-bit MSMPI ships only the first two. + + # As is, Intel Fortran and PGI Fortran both use the 'ec' variant of the calling convention, whereas + # the old Compaq Visual Fortran compiler defaulted to the 'ms' version. It's possible to make Intel Fortran + # use the CVF calling convention using /iface:cvf, but we assume - and this is also assumed in FortranCInterface - + # this isn't the case. It's also possible to make CVF use the 'ec' variant, using /iface=(cref,nomixed_str_len_arg). + + # Our strategy is now to locate all libraries, but enter msmpifec into the LIB_NAMES array. + # Should this not be adequate it's a straightforward way for a user to change the LIB_NAMES array and + # have his library found. Still, this should not be necessary outside of exceptional cases, as reasoned. + if ("${LANG}" STREQUAL "Fortran") + set(MPI_MSMPI_CALLINGCONVS c) + if("${CMAKE_SIZEOF_VOID_P}" EQUAL 4) + list(APPEND MPI_MSMPI_CALLINGCONVS s) endif() - string(STRIP ${LIB} LIB) - # MPI_LIB is cached by find_library, but we don't want that. Clear it first. - set(MPI_LIB "MPI_LIB-NOTFOUND" CACHE FILEPATH "Cleared" FORCE) - find_library(MPI_LIB NAMES ${LIB} HINTS ${MPI_LINK_PATH}) - - if (MPI_LIB) - list(APPEND MPI_LIBRARIES_WORK ${MPI_LIB}) - elseif (NOT MPI_FIND_QUIETLY) - message(WARNING "Unable to find MPI library ${LIB}") + foreach(mpistrlenpos IN ITEMS e m) + foreach(mpicallingconv IN LISTS MPI_MSMPI_CALLINGCONVS) + find_library(MPI_msmpif${mpistrlenpos}${mpicallingconv}_LIBRARY + NAMES msmpif${mpistrlenpos}${mpicallingconv} + HINTS "${MPI_MSMPI_LIB_PATH}" + DOC "Location of the msmpi${mpistrlenpos}${mpicallingconv} library for Microsoft MPI") + mark_as_advanced(MPI_msmpif${mpistrlenpos}${mpicallingconv}_LIBRARY) + endforeach() + endforeach() + if(NOT MPI_${LANG}_LIB_NAMES) + set(MPI_${LANG}_LIB_NAMES "msmpi;msmpifec" CACHE STRING "MPI ${LANG} libraries to link against" FORCE) endif() - endforeach() - # Sanity check MPI_LIBRARIES to make sure there are enough libraries - list(LENGTH MPI_LIBRARIES_WORK MPI_NUMLIBS) - list(LENGTH MPI_LIBNAMES MPI_NUMLIBS_EXPECTED) - if (NOT MPI_NUMLIBS EQUAL MPI_NUMLIBS_EXPECTED) - set(MPI_LIBRARIES_WORK "MPI_${lang}_LIBRARIES-NOTFOUND") + # At this point we're *not* done. MSMPI requires an additional include file for Fortran giving the value + # of MPI_AINT. This file is called mpifptr.h located in the x64 and x86 subfolders, respectively. + find_path(MPI_mpifptr_INCLUDE_DIR + NAMES "mpifptr.h" + HINTS "${MPI_MSMPI_INC_PATH_EXTRA}" + DOC "Location of the mpifptr.h extra header for Microsoft MPI") + if(NOT MPI_${LANG}_ADDITIONAL_INCLUDE_VARS) + set(MPI_${LANG}_ADDITIONAL_INCLUDE_VARS "mpifptr" CACHE STRING "MPI ${LANG} additional include directory variables, given in the form MPI_<name>_INCLUDE_DIR." FORCE) + endif() + mark_as_advanced(MPI_${LANG}_ADDITIONAL_INCLUDE_VARS MPI_mpifptr_INCLUDE_DIR) + else() + if(NOT MPI_${LANG}_LIB_NAMES) + set(MPI_${LANG}_LIB_NAMES "msmpi" CACHE STRING "MPI ${LANG} libraries to link against" FORCE) + endif() endif() + mark_as_advanced(MPI_${LANG}_LIB_NAMES) + set(MPI_GUESS_FOUND TRUE) endif() + endif() - elseif(try_libs) - # If we didn't have an MPI compiler script to interrogate, attempt to find everything - # with plain old find functions. This is nasty because MPI implementations have LOTS of - # different library names, so this section isn't going to be very generic. We need to - # make sure it works for MS MPI, though, since there are no compiler wrappers for that. - find_path(MPI_HEADER_PATH mpi.h - HINTS ${_MPI_BASE_DIR} ${_MPI_PREFIX_PATH} - PATH_SUFFIXES include Inc) - set(MPI_INCLUDE_PATH_WORK ${MPI_HEADER_PATH}) - - # Decide between 32-bit and 64-bit libraries for Microsoft's MPI - if("${CMAKE_SIZEOF_VOID_P}" EQUAL 8) - set(MS_MPI_ARCH_DIR x64) - set(MS_MPI_ARCH_DIR2 amd64) - else() - set(MS_MPI_ARCH_DIR x86) - set(MS_MPI_ARCH_DIR2 i386) - endif() + # At this point there's not many MPIs that we could still consider. + # OpenMPI 1.6.x and below supported Windows, but these ship compiler wrappers that still work. + # The only other relevant MPI implementation without a wrapper is MPICH2, which had Windows support in 1.4.1p1 and older. + if(NOT MPI_GUESS_LIBRARY_NAME OR "${MPI_GUESS_LIBRARY_NAME}" STREQUAL "MPICH2") + set(MPI_MPICH_PREFIX_PATHS + "$ENV{ProgramW6432}/MPICH2/lib" + "[HKEY_LOCAL_MACHINE\\SOFTWARE\\MPICH\\SMPD;binary]/../lib" + "[HKEY_LOCAL_MACHINE\\SOFTWARE\\MPICH2;Path]/lib" + ) - set(MPI_LIB "MPI_LIB-NOTFOUND" CACHE FILEPATH "Cleared" FORCE) - find_library(MPI_LIB - NAMES mpi mpich mpich2 msmpi - HINTS ${_MPI_BASE_DIR} ${_MPI_PREFIX_PATH} - PATH_SUFFIXES lib lib/${MS_MPI_ARCH_DIR} Lib Lib/${MS_MPI_ARCH_DIR} lib/${MS_MPI_ARCH_DIR2} Lib/${MS_MPI_ARCH_DIR2}) - set(MPI_LIBRARIES_WORK ${MPI_LIB}) - - # Right now, we only know about the extra libs for C++. - # We could add Fortran here (as there is usually libfmpich, etc.), but - # this really only has to work with MS MPI on Windows. - # Assume that other MPI's are covered by the compiler wrappers. - if (${lang} STREQUAL CXX) - set(MPI_LIB "MPI_LIB-NOTFOUND" CACHE FILEPATH "Cleared" FORCE) - find_library(MPI_LIB - NAMES mpi++ mpicxx cxx mpi_cxx - HINTS ${_MPI_BASE_DIR} ${_MPI_PREFIX_PATH} - PATH_SUFFIXES lib) - if (MPI_LIBRARIES_WORK AND MPI_LIB) - list(APPEND MPI_LIBRARIES_WORK ${MPI_LIB}) + # All of C, C++ and Fortran will need mpi.lib, so we'll look for this first + find_library(MPI_mpi_LIBRARY + NAMES mpi + HINTS ${MPI_MPICH_PREFIX_PATHS}) + mark_as_advanced(MPI_mpi_LIBRARY) + # If we found mpi.lib, we detect the rest of MPICH2 + if(MPI_mpi_LIBRARY) + set(MPI_MPICH_LIB_NAMES "mpi") + # If MPI-2 C++ bindings are requested, we need to locate cxx.lib as well. + # Otherwise, MPICH_SKIP_MPICXX will be defined and these bindings aren't needed. + if("${LANG}" STREQUAL "CXX" AND NOT MPI_CXX_SKIP_MPICXX) + find_library(MPI_cxx_LIBRARY + NAMES cxx + HINTS ${MPI_MPICH_PREFIX_PATHS}) + mark_as_advanced(MPI_cxx_LIBRARY) + list(APPEND MPI_MPICH_LIB_NAMES "cxx") + # For Fortran, MPICH2 provides three different libraries: + # fmpich2.lib which uses uppercase symbols and cdecl, + # fmpich2s.lib which uses uppercase symbols and stdcall (32-bit only), + # fmpich2g.lib which uses lowercase symbols with double underscores and cdecl. + # fmpich2s.lib would be useful for Compaq Visual Fortran, fmpich2g.lib has to be used with GNU g77 and is also + # provided in the form of an .a archive for MinGW and Cygwin. From our perspective, fmpich2.lib is the only one + # we need to try, and if it doesn't work with the given Fortran compiler we'd find out later on during validation + elseif("${LANG}" STREQUAL "Fortran") + find_library(MPI_fmpich2_LIBRARY + NAMES fmpich2 + HINTS ${MPI_MPICH_PREFIX_PATHS}) + find_library(MPI_fmpich2s_LIBRARY + NAMES fmpich2s + HINTS ${MPI_MPICH_PREFIX_PATHS}) + find_library(MPI_fmpich2g_LIBRARY + NAMES fmpich2g + HINTS ${MPI_MPICH_PREFIX_PATHS}) + mark_as_advanced(MPI_fmpich2_LIBRARY MPI_fmpich2s_LIBRARY MPI_fmpich2g_LIBRARY) + list(APPEND MPI_MPICH_LIB_NAMES "fmpich2") endif() - endif() - if (${lang} STREQUAL Fortran) - set(MPI_HEADER_PATH "MPI_HEADER_PATH-NOTFOUND" CACHE FILEPATH "Cleared" FORCE) - find_path(MPI_HEADER_PATH mpifptr.h - HINTS ${_MPI_BASE_DIR} ${_MPI_PREFIX_PATH} - PATH_SUFFIXES include Include include/${MS_MPI_ARCH_DIR} Include/${MS_MPI_ARCH_DIR2} Include/${MS_MPI_ARCH_DIR} include/${MS_MPI_ARCH_DIR2} Inc Inc/${MS_MPI_ARCH_DIR} Inc/${MS_MPI_ARCH_DIR2}) - if (MPI_INCLUDE_PATH_WORK AND MPI_HEADER_PATH) - list(APPEND MPI_INCLUDE_PATH_WORK ${MPI_HEADER_PATH}) - endif () - - set(MPI_LIB "MPI_LIB-NOTFOUND" CACHE FILEPATH "Cleared" FORCE) - find_library(MPI_LIB - NAMES fmpi fmpich fmpich2 fmpich2g msmpifec msmpifmc - HINTS ${_MPI_BASE_DIR} ${_MPI_PREFIX_PATH} - PATH_SUFFIXES lib lib/${MS_MPI_ARCH_DIR} Lib Lib/${MS_MPI_ARCH_DIR}) - if (MPI_LIBRARIES_WORK AND MPI_LIB) - list(APPEND MPI_LIBRARIES_WORK ${MPI_LIB}) - endif () - endif () - - if (NOT MPI_LIBRARIES_WORK) - set(MPI_LIBRARIES_WORK "MPI_${lang}_LIBRARIES-NOTFOUND") + if(NOT MPI_${LANG}_LIB_NAMES) + set(MPI_${LANG}_LIB_NAMES "${MPI_MPICH_LIB_NAMES}" CACHE STRING "MPI ${LANG} libraries to link against" FORCE) + endif() + unset(MPI_MPICH_LIB_NAMES) + + if(NOT MPI_${LANG}_ADDITIONAL_INCLUDE_DIRS) + # For MPICH2, the include folder would be in ../include relative to the library folder. + get_filename_component(MPI_MPICH_ROOT_DIR "${MPI_mpi_LIBRARY}" DIRECTORY) + get_filename_component(MPI_MPICH_ROOT_DIR "${MPI_MPICH_ROOT_DIR}" DIRECTORY) + if(IS_DIRECTORY "${MPI_MPICH_ROOT_DIR}/include") + set(MPI_${LANG}_ADDITIONAL_INCLUDE_DIRS "${MPI_MPICH_ROOT_DIR}/include" CACHE STRING "MPI ${LANG} additional include directory variables, given in the form MPI_<name>_INCLUDE_DIR." FORCE) + endif() + unset(MPI_MPICH_ROOT_DIR) + endif() + set(MPI_GUESS_FOUND TRUE) endif() + unset(MPI_MPICH_PREFIX_PATHS) endif() + endif() + set(MPI_${LANG}_GUESS_FOUND "${MPI_GUESS_FOUND}" PARENT_SCOPE) +endfunction() - # If we found MPI, set up all of the appropriate cache entries - set(MPI_${lang}_COMPILE_FLAGS ${MPI_COMPILE_FLAGS_WORK} CACHE STRING "MPI ${lang} compilation flags" FORCE) - set(MPI_${lang}_INCLUDE_PATH ${MPI_INCLUDE_PATH_WORK} CACHE STRING "MPI ${lang} include path" FORCE) - set(MPI_${lang}_LINK_FLAGS ${MPI_LINK_FLAGS_WORK} CACHE STRING "MPI ${lang} linking flags" FORCE) - set(MPI_${lang}_LIBRARIES ${MPI_LIBRARIES_WORK} CACHE STRING "MPI ${lang} libraries to link against" FORCE) - mark_as_advanced(MPI_${lang}_COMPILE_FLAGS MPI_${lang}_INCLUDE_PATH MPI_${lang}_LINK_FLAGS MPI_${lang}_LIBRARIES) +function(_MPI_adjust_compile_definitions LANG) + if("${LANG}" STREQUAL "CXX") + # To disable the C++ bindings, we need to pass some definitions since the mpi.h header has to deal with both C and C++ + # bindings in MPI-2. + if(MPI_CXX_SKIP_MPICXX AND NOT MPI_${LANG}_COMPILE_DEFINITIONS MATCHES "SKIP_MPICXX") + # MPICH_SKIP_MPICXX is being used in MPICH and derivatives like MVAPICH or Intel MPI + # OMPI_SKIP_MPICXX is being used in Open MPI + # _MPICC_H is being used for IBM Platform MPI + list(APPEND MPI_${LANG}_COMPILE_DEFINITIONS "MPICH_SKIP_MPICXX" "OMPI_SKIP_MPICXX" "_MPICC_H") + set(MPI_${LANG}_COMPILE_DEFINITIONS "${MPI_${LANG}_COMPILE_DEFINITIONS}" CACHE STRING "MPI ${LANG} compilation definitions" FORCE) + endif() + endif() +endfunction() - # clear out our temporary lib/header detectionv variable here. - set(MPI_LIB "MPI_LIB-NOTFOUND" CACHE INTERNAL "Scratch variable for MPI lib detection" FORCE) - set(MPI_HEADER_PATH "MPI_HEADER_PATH-NOTFOUND" CACHE INTERNAL "Scratch variable for MPI header detection" FORCE) +macro(_MPI_assemble_libraries LANG) + set(MPI_${LANG}_LIBRARIES "") + foreach(mpilib IN LISTS MPI_${LANG}_LIB_NAMES) + list(APPEND MPI_${LANG}_LIBRARIES ${MPI_${mpilib}_LIBRARY}) + endforeach() +endmacro() + +macro(_MPI_assemble_include_dirs LANG) + set(MPI_${LANG}_INCLUDE_DIRS "${MPI_${LANG}_ADDITIONAL_INCLUDE_DIRS}") + if("${LANG}" MATCHES "(C|CXX)") + if(MPI_${LANG}_HEADER_DIR) + list(APPEND MPI_${LANG}_INCLUDE_DIRS "${MPI_${LANG}_HEADER_DIR}") + endif() + else() # Fortran + if(MPI_${LANG}_F77_HEADER_DIR) + list(APPEND MPI_${LANG}_INCLUDE_DIRS "${MPI_${LANG}_F77_HEADER_DIR}") + endif() + if(MPI_${LANG}_MODULE_DIR AND NOT "${MPI_${LANG}_MODULE_DIR}" IN_LIST MPI_${LANG}_INCLUDE_DIRS) + list(APPEND MPI_${LANG}_INCLUDE_DIRS "${MPI_${LANG}_MODULE_DIR}") + endif() endif() + if(MPI_${LANG}_ADDITIONAL_INCLUDE_VARS) + foreach(mpiadditionalinclude IN LISTS MPI_${LANG}_ADDITIONAL_INCLUDE_VARS) + list(APPEND MPI_${LANG}_INCLUDE_DIRS "${MPI_${mpiadditionalinclude}_INCLUDE_DIR}") + endforeach() + endif() +endmacro() - # finally set a found variable for each MPI language - if (MPI_${lang}_INCLUDE_PATH AND MPI_${lang}_LIBRARIES) - set(MPI_${lang}_FOUND TRUE PARENT_SCOPE) - else() - set(MPI_${lang}_FOUND FALSE PARENT_SCOPE) +function(_MPI_split_include_dirs LANG) + # Backwards compatibility: Search INCLUDE_PATH if given. + if(MPI_${LANG}_INCLUDE_PATH) + list(APPEND MPI_${LANG}_ADDITIONAL_INCLUDE_DIRS "${MPI_${LANG}_INCLUDE_PATH}") endif() + + # We try to find the headers/modules among those paths (and system paths) + # For C/C++, we just need to have a look for mpi.h. + if("${LANG}" MATCHES "(C|CXX)") + find_path(MPI_${LANG}_HEADER_DIR "mpi.h" + HINTS ${MPI_${LANG}_ADDITIONAL_INCLUDE_DIRS} + ) + mark_as_advanced(MPI_${LANG}_HEADER_DIR) + if(MPI_${LANG}_ADDITIONAL_INCLUDE_DIRS) + list(REMOVE_ITEM MPI_${LANG}_ADDITIONAL_INCLUDE_DIRS "${MPI_${LANG}_HEADER_DIR}") + endif() + # Fortran is more complicated here: An implementation could provide + # any of the Fortran 77/90/2008 APIs for MPI. For example, MSMPI + # only provides Fortran 77 and - if mpi.f90 is built - potentially + # a Fortran 90 module. + elseif("${LANG}" STREQUAL "Fortran") + find_path(MPI_${LANG}_F77_HEADER_DIR "mpif.h" + HINTS ${MPI_${LANG}_ADDITIONAL_INCLUDE_DIRS} + ) + find_path(MPI_${LANG}_MODULE_DIR + NAMES "mpi.mod" "mpi_f08.mod" + HINTS ${MPI_${LANG}_ADDITIONAL_INCLUDE_DIRS} + ) + if(MPI_${LANG}_ADDITIONAL_INCLUDE_DIRS) + list(REMOVE_ITEM MPI_${LANG}_ADDITIONAL_INCLUDE_DIRS + "${MPI_${LANG}_F77_HEADER_DIR}" + "${MPI_${LANG}_MODULE_DIR}" + ) + endif() + mark_as_advanced(MPI_${LANG}_F77_HEADER_DIR MPI_${LANG}_MODULE_DIR) + endif() + set(MPI_${LANG}_ADDITIONAL_INCLUDE_DIRS ${MPI_${LANG}_ADDITIONAL_INCLUDE_DIRS} CACHE STRING "MPI ${LANG} additional include directories" FORCE) endfunction() +macro(_MPI_create_imported_target LANG) + if(NOT TARGET MPI::MPI_${LANG}) + add_library(MPI::MPI_${LANG} INTERFACE IMPORTED) + endif() + + set_property(TARGET MPI::MPI_${LANG} PROPERTY INTERFACE_COMPILE_OPTIONS "${MPI_${LANG}_COMPILE_OPTIONS}") + set_property(TARGET MPI::MPI_${LANG} PROPERTY INTERFACE_COMPILE_DEFINITIONS "${MPI_${LANG}_COMPILE_DEFINITIONS}") -# This function attempts to compile with the regular compiler, to see if MPI programs -# work with it. This is a last ditch attempt after we've tried interrogating mpicc and -# friends, and after we've tried to find generic libraries. Works on machines like -# Cray XE6, where the modules environment changes what MPI version cc, CC, and ftn use. -function(try_regular_compiler lang success) - set(scratch_directory ${CMAKE_CURRENT_BINARY_DIR}${CMAKE_FILES_DIRECTORY}) - if (${lang} STREQUAL Fortran) - set(test_file ${scratch_directory}/cmake_mpi_test.f90) - file(WRITE ${test_file} - "program hello\n" - "include 'mpif.h'\n" - "integer ierror\n" - "call MPI_INIT(ierror)\n" - "call MPI_FINALIZE(ierror)\n" - "end\n") + set_property(TARGET MPI::MPI_${LANG} PROPERTY INTERFACE_LINK_LIBRARIES "") + if(MPI_${LANG}_LINK_FLAGS) + set_property(TARGET MPI::MPI_${LANG} APPEND PROPERTY INTERFACE_LINK_LIBRARIES "${MPI_${LANG}_LINK_FLAGS}") + endif() + # If the compiler links MPI implicitly, no libraries will be found as they're contained within + # CMAKE_<LANG>_IMPLICIT_LINK_LIBRARIES already. + if(MPI_${LANG}_LIBRARIES) + set_property(TARGET MPI::MPI_${LANG} APPEND PROPERTY INTERFACE_LINK_LIBRARIES "${MPI_${LANG}_LIBRARIES}") + endif() + # Given the new design of FindMPI, INCLUDE_DIRS will always be located, even under implicit linking. + set_property(TARGET MPI::MPI_${LANG} PROPERTY INTERFACE_INCLUDE_DIRECTORIES "${MPI_${LANG}_INCLUDE_DIRS}") +endmacro() + +function(_MPI_try_staged_settings LANG MPI_TEST_FILE_NAME MODE RUN_BINARY) + set(WORK_DIR "${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/FindMPI") + set(SRC_DIR "${CMAKE_CURRENT_LIST_DIR}/FindMPI") + set(BIN_FILE "${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/FindMPI/${MPI_TEST_FILE_NAME}_${LANG}.bin") + unset(MPI_TEST_COMPILE_DEFINITIONS) + if("${LANG}" STREQUAL "Fortran") + if("${MODE}" STREQUAL "F90_MODULE") + set(MPI_Fortran_INCLUDE_LINE "use mpi\n implicit none") + elseif("${MODE}" STREQUAL "F08_MODULE") + set(MPI_Fortran_INCLUDE_LINE "use mpi_f08\n implicit none") + else() # F77 header + set(MPI_Fortran_INCLUDE_LINE "implicit none\n include 'mpif.h'") + endif() + configure_file("${SRC_DIR}/${MPI_TEST_FILE_NAME}.f90.in" "${WORK_DIR}/${MPI_TEST_FILE_NAME}.f90" @ONLY) + set(MPI_TEST_SOURCE_FILE "${WORK_DIR}/${MPI_TEST_FILE_NAME}.f90") + elseif("${LANG}" STREQUAL "CXX") + configure_file("${SRC_DIR}/${MPI_TEST_FILE_NAME}.c" "${WORK_DIR}/${MPI_TEST_FILE_NAME}.cpp" COPYONLY) + set(MPI_TEST_SOURCE_FILE "${WORK_DIR}/${MPI_TEST_FILE_NAME}.cpp") + if("${MODE}" STREQUAL "TEST_MPICXX") + set(MPI_TEST_COMPILE_DEFINITIONS TEST_MPI_MPICXX) + endif() + else() # C + set(MPI_TEST_SOURCE_FILE "${SRC_DIR}/${MPI_TEST_FILE_NAME}.c") + endif() + if(RUN_BINARY) + try_run(MPI_RUN_RESULT_${LANG}_${MPI_TEST_FILE_NAME}_${MODE} MPI_RESULT_${LANG}_${MPI_TEST_FILE_NAME}_${MODE} + "${CMAKE_BINARY_DIR}" SOURCES "${MPI_TEST_SOURCE_FILE}" + COMPILE_DEFINITIONS ${MPI_TEST_COMPILE_DEFINITIONS} + LINK_LIBRARIES MPI::MPI_${LANG} + RUN_OUTPUT_VARIABLE MPI_RUN_OUTPUT_${LANG}_${MPI_TEST_FILE_NAME}_${MODE}) + set(MPI_RUN_OUTPUT_${LANG}_${MPI_TEST_FILE_NAME}_${MODE} "${MPI_RUN_OUTPUT_${LANG}_${MPI_TEST_FILE_NAME}_${MODE}}" PARENT_SCOPE) else() - if (${lang} STREQUAL CXX) - set(test_file ${scratch_directory}/cmake_mpi_test.cpp) - else() - set(test_file ${scratch_directory}/cmake_mpi_test.c) - endif() - file(WRITE ${test_file} - "#include <mpi.h>\n" - "int main(int argc, char **argv) {\n" - " MPI_Init(&argc, &argv);\n" - " MPI_Finalize();\n" - "}\n") - endif() - try_compile(compiler_has_mpi ${scratch_directory} ${test_file}) - if (compiler_has_mpi) - set(MPI_${lang}_NO_INTERROGATE ${CMAKE_${lang}_COMPILER} CACHE STRING "Whether to interrogate MPI ${lang} compiler" FORCE) - set(MPI_${lang}_COMPILER ${CMAKE_${lang}_COMPILER} CACHE STRING "MPI ${lang} compiler" FORCE) - set(MPI_${lang}_COMPILE_FLAGS "" CACHE STRING "MPI ${lang} compilation flags" FORCE) - set(MPI_${lang}_INCLUDE_PATH "" CACHE STRING "MPI ${lang} include path" FORCE) - set(MPI_${lang}_LINK_FLAGS "" CACHE STRING "MPI ${lang} linking flags" FORCE) - set(MPI_${lang}_LIBRARIES "" CACHE STRING "MPI ${lang} libraries to link against" FORCE) - endif() - set(${success} ${compiler_has_mpi} PARENT_SCOPE) - unset(compiler_has_mpi CACHE) + try_compile(MPI_RESULT_${LANG}_${MPI_TEST_FILE_NAME}_${MODE} + "${CMAKE_BINARY_DIR}" SOURCES "${MPI_TEST_SOURCE_FILE}" + COMPILE_DEFINITIONS ${MPI_TEST_COMPILE_DEFINITIONS} + LINK_LIBRARIES MPI::MPI_${LANG} + COPY_FILE "${BIN_FILE}") + endif() endfunction() -# End definitions, commence real work here. +macro(_MPI_check_lang_works LANG) + # For Fortran we may have by the MPI-3 standard an implementation that provides: + # - the mpi_f08 module + # - *both*, the mpi module and 'mpif.h' + # Since older MPI standards (MPI-1) did not define anything but 'mpif.h', we need to check all three individually. + if( NOT MPI_${LANG}_WORKS ) + if("${LANG}" STREQUAL "Fortran") + set(MPI_Fortran_INTEGER_LINE "(kind=MPI_INTEGER_KIND)") + _MPI_try_staged_settings(${LANG} test_mpi F77_HEADER FALSE) + _MPI_try_staged_settings(${LANG} test_mpi F90_MODULE FALSE) + _MPI_try_staged_settings(${LANG} test_mpi F08_MODULE FALSE) + + set(MPI_${LANG}_WORKS FALSE) + + foreach(mpimethod IN ITEMS F77_HEADER F08_MODULE F90_MODULE) + if(MPI_RESULT_${LANG}_test_mpi_${mpimethod}) + set(MPI_${LANG}_WORKS TRUE) + set(MPI_${LANG}_HAVE_${mpimethod} TRUE) + else() + set(MPI_${LANG}_HAVE_${mpimethod} FALSE) + endif() + endforeach() + # MPI-1 versions had no MPI_INTGER_KIND defined, so we need to try without it. + # However, MPI-1 also did not define the Fortran 90 and 08 modules, so we only try the F77 header. + unset(MPI_Fortran_INTEGER_LINE) + if(NOT MPI_${LANG}_WORKS) + _MPI_try_staged_settings(${LANG} test_mpi F77_HEADER_NOKIND FALSE) + if(MPI_RESULT_${LANG}_test_mpi_F77_HEADER_NOKIND) + set(MPI_${LANG}_WORKS TRUE) + set(MPI_${LANG}_HAVE_F77_HEADER TRUE) + endif() + endif() + else() + _MPI_try_staged_settings(${LANG} test_mpi normal FALSE) + # If 'test_mpi' built correctly, we've found valid MPI settings. There might not be MPI-2 C++ support, but there can't + # be MPI-2 C++ support without the C bindings being present, so checking for them is sufficient. + set(MPI_${LANG}_WORKS "${MPI_RESULT_${LANG}_test_mpi_normal}") + endif() + endif() +endmacro() + +# Some systems install various MPI implementations in separate folders in some MPI prefix +# This macro enumerates all such subfolders and adds them to the list of hints that will be searched. +macro(MPI_search_mpi_prefix_folder PREFIX_FOLDER) + if(EXISTS "${PREFIX_FOLDER}") + file(GLOB _MPI_folder_children RELATIVE "${PREFIX_FOLDER}" "${PREFIX_FOLDER}/*") + foreach(_MPI_folder_child IN LISTS _MPI_folder_children) + if(IS_DIRECTORY "${PREFIX_FOLDER}/${_MPI_folder_child}") + list(APPEND MPI_HINT_DIRS "${PREFIX_FOLDER}/${_MPI_folder_child}") + endif() + endforeach() + endif() +endmacro() + +set(MPI_HINT_DIRS ${MPI_HOME} $ENV{MPI_HOME} $ENV{I_MPI_ROOT}) +if("${CMAKE_HOST_SYSTEM_NAME}" STREQUAL "Linux") + # SUSE Linux Enterprise Server stores its MPI implementations under /usr/lib64/mpi/gcc/<name> + # We enumerate the subfolders and append each as a prefix + MPI_search_mpi_prefix_folder("/usr/lib64/mpi/gcc") +elseif("${CMAKE_HOST_SYSTEM_NAME}" STREQUAL "Windows") + # MSMPI stores its runtime in a special folder, this adds the possible locations to the hints. + list(APPEND MPI_HINT_DIRS $ENV{MSMPI_BIN} "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\MPI;InstallRoot]") +elseif("${CMAKE_HOST_SYSTEM_NAME}" STREQUAL "FreeBSD") + # FreeBSD ships mpich under the normal system paths - but available openmpi implementations + # will be found in /usr/local/mpi/<name> + MPI_search_mpi_prefix_folder("/usr/local/mpi/") +endif() -# Most mpi distros have some form of mpiexec which gives us something we can reliably look for. -find_program(MPIEXEC - NAMES ${_MPI_EXEC_NAMES} - HINTS ${MPI_HOME} $ENV{MPI_HOME} - PATHS ${_MPI_PREFIX_PATH} - PATH_SUFFIXES bin +# Most MPI distributions have some form of mpiexec or mpirun which gives us something we can look for. +# The MPI standard does not mandate the existence of either, but instead only makes requirements if a distribution +# ships an mpiexec program (mpirun executables are not regulated by the standard). +find_program(MPIEXEC_EXECUTABLE + NAMES ${_MPIEXEC_NAMES} + PATH_SUFFIXES bin sbin + HINTS ${MPI_HINT_DIRS} DOC "Executable for running MPI programs.") # call get_filename_component twice to remove mpiexec and the directory it exists in (typically bin). # This gives us a fairly reliable base directory to search for /bin /lib and /include from. -get_filename_component(_MPI_BASE_DIR "${MPIEXEC}" PATH) +get_filename_component(_MPI_BASE_DIR "${MPIEXEC_EXECUTABLE}" PATH) get_filename_component(_MPI_BASE_DIR "${_MPI_BASE_DIR}" PATH) -set(MPIEXEC_NUMPROC_FLAG "-np" CACHE STRING "Flag used by MPI to specify the number of processes for MPIEXEC; the next option will be the number of processes.") -set(MPIEXEC_PREFLAGS "" CACHE STRING "These flags will be directly before the executable that is being run by MPIEXEC.") -set(MPIEXEC_POSTFLAGS "" CACHE STRING "These flags will come after all flags given to MPIEXEC.") -set(MPIEXEC_MAX_NUMPROCS "2" CACHE STRING "Maximum number of processors available to run MPI applications.") -mark_as_advanced(MPIEXEC MPIEXEC_NUMPROC_FLAG MPIEXEC_PREFLAGS MPIEXEC_POSTFLAGS MPIEXEC_MAX_NUMPROCS) +# According to the MPI standard, section 8.8 -n is a guaranteed, and the only guaranteed way to +# launch an MPI process using mpiexec if such a program exists. +set(MPIEXEC_NUMPROC_FLAG "-n" CACHE STRING "Flag used by MPI to specify the number of processes for mpiexec; the next option will be the number of processes.") +set(MPIEXEC_PREFLAGS "" CACHE STRING "These flags will be directly before the executable that is being run by mpiexec.") +set(MPIEXEC_POSTFLAGS "" CACHE STRING "These flags will be placed after all flags passed to mpiexec.") +# Set the number of processes to the physical processor count +cmake_host_system_information(RESULT _MPIEXEC_NUMPROCS QUERY NUMBER_OF_PHYSICAL_CORES) +set(MPIEXEC_MAX_NUMPROCS "${_MPIEXEC_NUMPROCS}" CACHE STRING "Maximum number of processors available to run MPI applications.") +unset(_MPIEXEC_NUMPROCS) +mark_as_advanced(MPIEXEC_EXECUTABLE MPIEXEC_NUMPROC_FLAG MPIEXEC_PREFLAGS MPIEXEC_POSTFLAGS MPIEXEC_MAX_NUMPROCS) #============================================================================= # Backward compatibility input hacks. Propagate the FindMPI hints to C and # CXX if the respective new versions are not defined. Translate the old -# MPI_LIBRARY and MPI_EXTRA_LIBRARY to respective MPI_${lang}_LIBRARIES. +# MPI_LIBRARY and MPI_EXTRA_LIBRARY to respective MPI_${LANG}_LIBRARIES. # # Once we find the new variables, we translate them back into their old # equivalents below. -foreach (lang C CXX) +foreach (LANG IN ITEMS C CXX) # Old input variables. set(_MPI_OLD_INPUT_VARS COMPILER COMPILE_FLAGS INCLUDE_PATH LINK_FLAGS) # Set new vars based on their old equivalents, if the new versions are not already set. foreach (var ${_MPI_OLD_INPUT_VARS}) - if (NOT MPI_${lang}_${var} AND MPI_${var}) - set(MPI_${lang}_${var} "${MPI_${var}}") + if (NOT MPI_${LANG}_${var} AND MPI_${var}) + set(MPI_${LANG}_${var} "${MPI_${var}}") endif() endforeach() - # Special handling for MPI_LIBRARY and MPI_EXTRA_LIBRARY, which we nixed in the - # new FindMPI. These need to be merged into MPI_<lang>_LIBRARIES - if (NOT MPI_${lang}_LIBRARIES AND (MPI_LIBRARY OR MPI_EXTRA_LIBRARY)) - set(MPI_${lang}_LIBRARIES ${MPI_LIBRARY} ${MPI_EXTRA_LIBRARY}) + # Chop the old compile flags into options and definitions + if(MPI_${LANG}_COMPILE_FLAGS) + unset(MPI_${LANG}_COMPILE_OPTIONS) + unset(MPI_${LANG}_COMPILE_DEFINITIONS) + separate_arguments(MPI_SEPARATE_FLAGS NATIVE_COMMAND "${MPI_${LANG}_COMPILE_FLAGS}") + foreach(_MPI_FLAG IN LISTS MPI_SEPARATE_FLAGS) + if("${_MPI_FLAG}" MATCHES "^ *[-/D]([^ ]+)") + list(APPEND MPI_${LANG}_COMPILE_DEFINITIONS "${CMAKE_MATCH_1}") + else() + list(APPEND MPI_${LANG}_COMPILE_FLAGS "${_MPI_FLAG}") + endif() + endforeach() + unset(MPI_SEPARATE_FLAGS) + endif() + + # If a list of libraries was given, we'll split it into new-style cache variables + if(NOT MPI_${LANG}_LIB_NAMES) + foreach(_MPI_LIB IN LISTS MPI_${LANG}_LIBRARIES MPI_LIBRARY MPI_EXTRA_LIBRARY) + get_filename_component(_MPI_PLAIN_LIB_NAME "${_MPI_LIB}" NAME_WE) + get_filename_component(_MPI_LIB_NAME "${_MPI_LIB}" NAME) + get_filename_component(_MPI_LIB_DIR "${_MPI_LIB}" DIRECTORY) + list(APPEND MPI_PLAIN_LIB_NAMES_WORK "${_MPI_PLAIN_LIB_NAME}") + find_library(MPI_${_MPI_PLAIN_LIB_NAME}_LIBRARY + NAMES "${_MPI_LIB_NAME}" "lib${_MPI_LIB_NAME}" + HINTS ${_MPI_LIB_DIR} $ENV{MPI_LIB} + DOC "Location of the ${_MPI_PLAIN_LIB_NAME} library for MPI" + ) + mark_as_advanced(MPI_${_MPI_PLAIN_LIB_NAME}_LIBRARY) + endforeach() endif() endforeach() #============================================================================= +unset(MPI_VERSION) +unset(MPI_VERSION_MAJOR) +unset(MPI_VERSION_MINOR) + +unset(_MPI_MIN_VERSION) # This loop finds the compilers and sends them off for interrogation. -foreach (lang C CXX Fortran) - if (CMAKE_${lang}_COMPILER_WORKS) - # If the user supplies a compiler *name* instead of an absolute path, assume that we need to find THAT compiler. - if (MPI_${lang}_COMPILER) - if (NOT IS_ABSOLUTE "${MPI_${lang}_COMPILER}") - # Get rid of our default list of names and just search for the name the user wants. - set(_MPI_${lang}_COMPILER_NAMES ${MPI_${lang}_COMPILER}) - set(MPI_${lang}_COMPILER "MPI_${lang}_COMPILER-NOTFOUND" CACHE FILEPATH "Cleared" FORCE) - endif() - # If the user specifies a compiler, we don't want to try to search libraries either. - set(try_libs FALSE) +foreach(LANG IN ITEMS C CXX Fortran) + if(CMAKE_${LANG}_COMPILER_LOADED) + if(NOT MPI_FIND_COMPONENTS) + set(_MPI_FIND_${LANG} TRUE) + elseif( ${LANG} IN_LIST MPI_FIND_COMPONENTS) + set(_MPI_FIND_${LANG} TRUE) + elseif( ${LANG} STREQUAL CXX AND NOT MPI_CXX_SKIP_MPICXX AND MPICXX IN_LIST MPI_FIND_COMPONENTS ) + set(_MPI_FIND_${LANG} TRUE) else() - set(try_libs TRUE) + set(_MPI_FIND_${LANG} FALSE) + endif() + else() + set(_MPI_FIND_${LANG} FALSE) + endif() + if(_MPI_FIND_${LANG}) + if( ${LANG} STREQUAL CXX AND NOT MPICXX IN_LIST MPI_FIND_COMPONENTS ) + set(MPI_CXX_SKIP_MPICXX FALSE CACHE BOOL "If true, the MPI-2 C++ bindings are disabled using definitions.") + mark_as_advanced(MPI_CXX_SKIP_MPICXX) endif() + if(NOT (MPI_${LANG}_LIB_NAMES AND (MPI_${LANG}_INCLUDE_PATH OR MPI_${LANG}_INCLUDE_DIRS OR MPI_${LANG}_ADDITIONAL_INCLUDE_DIRS))) + if(NOT MPI_${LANG}_COMPILER AND NOT MPI_ASSUME_NO_BUILTIN_MPI) + # Should the imported targets be empty, we effectively try whether the compiler supports MPI on its own, which is the case on e.g. + # Cray PrgEnv. + _MPI_create_imported_target(${LANG}) + _MPI_check_lang_works(${LANG}) + + # If the compiler can build MPI code on its own, it functions as an MPI compiler and we'll set the variable to point to it. + if(MPI_${LANG}_WORKS) + set(MPI_${LANG}_COMPILER "${CMAKE_${LANG}_COMPILER}" CACHE FILEPATH "MPI compiler for ${LANG}" FORCE) + endif() + endif() - find_program(MPI_${lang}_COMPILER - NAMES ${_MPI_${lang}_COMPILER_NAMES} - HINTS ${_MPI_BASE_DIR}/bin - PATHS ${_MPI_PREFIX_PATH} - ) - interrogate_mpi_compiler(${lang} ${try_libs}) - mark_as_advanced(MPI_${lang}_COMPILER) + # If the user specified a library name we assume they prefer that library over a wrapper. If not, they can disable skipping manually. + if(NOT DEFINED MPI_SKIP_COMPILER_WRAPPER AND MPI_GUESS_LIBRARY_NAME) + set(MPI_SKIP_COMPILER_WRAPPER TRUE) + endif() + if(NOT MPI_SKIP_COMPILER_WRAPPER) + if(MPI_${LANG}_COMPILER) + # If the user supplies a compiler *name* instead of an absolute path, assume that we need to find THAT compiler. + if (NOT IS_ABSOLUTE "${MPI_${LANG}_COMPILER}") + # Get rid of our default list of names and just search for the name the user wants. + set(_MPI_${LANG}_COMPILER_NAMES "${MPI_${LANG}_COMPILER}") + unset(MPI_${LANG}_COMPILER CACHE) + endif() + # If the user specifies a compiler, we don't want to try to search libraries either. + set(MPI_PINNED_COMPILER TRUE) + else() + set(MPI_PINNED_COMPILER FALSE) + endif() + + # If we have an MPI base directory, we'll try all compiler names in that one first. + # This should prevent mixing different MPI environments + if(_MPI_BASE_DIR) + find_program(MPI_${LANG}_COMPILER + NAMES ${_MPI_${LANG}_COMPILER_NAMES} + PATH_SUFFIXES bin sbin + HINTS ${_MPI_BASE_DIR} + NO_DEFAULT_PATH + DOC "MPI compiler for ${LANG}" + ) + endif() + + # If the base directory did not help (for example because the mpiexec isn't in the same directory as the compilers), + # we shall try searching in the default paths. + find_program(MPI_${LANG}_COMPILER + NAMES ${_MPI_${LANG}_COMPILER_NAMES} + PATH_SUFFIXES bin sbin + DOC "MPI compiler for ${LANG}" + ) + + if(MPI_${LANG}_COMPILER STREQUAL CMAKE_${LANG}_COMPILER) + set(MPI_SKIP_GUESSING TRUE) + elseif(MPI_${LANG}_COMPILER) + _MPI_interrogate_compiler(${LANG}) + else() + set(MPI_${LANG}_WRAPPER_FOUND FALSE) + endif() + else() + set(MPI_${LANG}_WRAPPER_FOUND FALSE) + set(MPI_PINNED_COMPILER FALSE) + endif() + + if(NOT MPI_${LANG}_WRAPPER_FOUND AND NOT MPI_PINNED_COMPILER) + # For C++, we may use the settings for C. Should a given compiler wrapper for C++ not exist, but one for C does, we copy over the + # settings for C. An MPI distribution that is in this situation would be IBM Platform MPI. + if("${LANG}" STREQUAL "CXX" AND MPI_C_WRAPPER_FOUND) + set(MPI_${LANG}_COMPILE_OPTIONS ${MPI_C_COMPILE_OPTIONS} CACHE STRING "MPI ${LANG} compilation options" ) + set(MPI_${LANG}_COMPILE_DEFINITIONS ${MPI_C_COMPILE_DEFINITIONS} CACHE STRING "MPI ${LANG} compilation definitions" ) + set(MPI_${LANG}_ADDITIONAL_INCLUDE_DIRS ${MPI_C_INCLUDE_DIRS} CACHE STRING "MPI ${LANG} additional include directories") + set(MPI_${LANG}_LINK_FLAGS ${MPI_C_LINK_FLAGS} CACHE STRING "MPI ${LANG} linker flags" ) + set(MPI_${LANG}_LIB_NAMES ${MPI_C_LIB_NAMES} CACHE STRING "MPI ${LANG} libraries to link against" ) + set(MPI_${LANG}_WRAPPER_FOUND TRUE) + elseif(NOT MPI_SKIP_GUESSING) + _MPI_guess_settings(${LANG}) + endif() + endif() + endif() - # last ditch try -- if nothing works so far, just try running the regular compiler and - # see if we can create an MPI executable. - set(regular_compiler_worked 0) - if (NOT MPI_${lang}_LIBRARIES OR NOT MPI_${lang}_INCLUDE_PATH) - try_regular_compiler(${lang} regular_compiler_worked) + _MPI_split_include_dirs(${LANG}) + if(NOT MPI_${LANG}_COMPILER STREQUAL CMAKE_${LANG}_COMPILER) + _MPI_assemble_include_dirs(${LANG}) + _MPI_assemble_libraries(${LANG}) endif() + _MPI_adjust_compile_definitions(${LANG}) + # We always create imported targets even if they're empty + _MPI_create_imported_target(${LANG}) - # add fortran mpi module path if ENV VAR exists - set (MPI_${lang}_INCLUDE_PATH "${MPI_${lang}_INCLUDE_PATH};$ENV{MPI_FORTRAN_MOD_DIR}") + if(NOT MPI_${LANG}_WORKS) + _MPI_check_lang_works(${LANG}) + endif() - set(MPI_${lang}_FIND_QUIETLY ${MPI_FIND_QUIETLY}) - set(MPI_${lang}_FIND_REQUIRED ${MPI_FIND_REQUIRED}) - set(MPI_${lang}_FIND_VERSION ${MPI_FIND_VERSION}) - set(MPI_${lang}_FIND_VERSION_EXACT ${MPI_FIND_VERSION_EXACT}) + # Next, we'll initialize the MPI variables that have not been previously set. + set(MPI_${LANG}_COMPILE_OPTIONS "" CACHE STRING "MPI ${LANG} compilation flags" ) + set(MPI_${LANG}_COMPILE_DEFINITIONS "" CACHE STRING "MPI ${LANG} compilation definitions" ) + set(MPI_${LANG}_ADDITIONAL_INCLUDE_DIRS "" CACHE STRING "MPI ${LANG} additional include directories") + set(MPI_${LANG}_LINK_FLAGS "" CACHE STRING "MPI ${LANG} linker flags" ) + set(MPI_${LANG}_LIB_NAMES "" CACHE STRING "MPI ${LANG} libraries to link against" ) + mark_as_advanced(MPI_${LANG}_COMPILE_OPTIONS MPI_${LANG}_COMPILE_DEFINITIONS MPI_${LANG}_LINK_FLAGS + MPI_${LANG}_LIB_NAMES MPI_${LANG}_ADDITIONAL_INCLUDE_DIRS MPI_${LANG}_COMPILER) + + # If we've found MPI, then we'll perform additional analysis: Determine the MPI version, MPI library version, supported + # MPI APIs (i.e. MPI-2 C++ bindings). For Fortran we also need to find specific parameters if we're under MPI-3. + if(MPI_${LANG}_WORKS) + if("${LANG}" STREQUAL "CXX" AND NOT DEFINED MPI_MPICXX_FOUND) + if(NOT MPI_CXX_SKIP_MPICXX AND NOT MPI_CXX_VALIDATE_SKIP_MPICXX) + _MPI_try_staged_settings(${LANG} test_mpi MPICXX FALSE) + if(MPI_RESULT_${LANG}_test_mpi_MPICXX) + set(MPI_MPICXX_FOUND TRUE) + else() + set(MPI_MPICXX_FOUND FALSE) + endif() + else() + set(MPI_MPICXX_FOUND FALSE) + endif() + endif() - if (regular_compiler_worked) - find_package_handle_standard_args(MPI_${lang} DEFAULT_MSG MPI_${lang}_COMPILER) + # At this point, we know the bindings present but not the MPI version or anything else. + if(NOT DEFINED MPI_${LANG}_VERSION) + unset(MPI_${LANG}_VERSION_MAJOR) + unset(MPI_${LANG}_VERSION_MINOR) + endif() + set(MPI_BIN_FOLDER ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/FindMPI) + + # For Fortran, we'll want to use the most modern MPI binding to test capabilities other than the + # Fortran parameters, since those depend on the method of consumption. + # For C++, we can always use the C bindings, and should do so, since the C++ bindings do not exist in MPI-3 + # whereas the C bindings do, and the C++ bindings never offered any feature advantage over their C counterparts. + if("${LANG}" STREQUAL "Fortran") + if(MPI_${LANG}_HAVE_F08_MODULE) + set(MPI_${LANG}_HIGHEST_METHOD F08_MODULE) + elseif(MPI_${LANG}_HAVE_F90_MODULE) + set(MPI_${LANG}_HIGHEST_METHOD F90_MODULE) + else() + set(MPI_${LANG}_HIGHEST_METHOD F77_HEADER) + endif() + + # Another difference between C and Fortran is that we can't use the preprocessor to determine whether MPI_VERSION + # and MPI_SUBVERSION are provided. These defines did not exist in MPI 1.0 and 1.1 and therefore might not + # exist. For C/C++, test_mpi.c will handle the MPI_VERSION extraction, but for Fortran, we need mpiver.f90. + if(NOT DEFINED MPI_${LANG}_VERSION) + _MPI_try_staged_settings(${LANG} mpiver ${MPI_${LANG}_HIGHEST_METHOD} FALSE) + if(MPI_RESULT_${LANG}_mpiver_${MPI_${LANG}_HIGHEST_METHOD}) + file(STRINGS ${MPI_BIN_FOLDER}/mpiver_${LANG}.bin _MPI_VERSION_STRING LIMIT_COUNT 1 REGEX "INFO:MPI-VER") + if("${_MPI_VERSION_STRING}" MATCHES ".*INFO:MPI-VER\\[([0-9]+)\\.([0-9]+)\\].*") + set(MPI_${LANG}_VERSION_MAJOR "${CMAKE_MATCH_1}") + set(MPI_${LANG}_VERSION_MINOR "${CMAKE_MATCH_2}") + set(MPI_${LANG}_VERSION "${MPI_${LANG}_VERSION_MAJOR}.${MPI_${LANG}_VERSION_MINOR}") + endif() + endif() + endif() + + # Finally, we want to find out which capabilities a given interface supports, compare the MPI-3 standard. + # This is determined by interface specific parameters MPI_SUBARRAYS_SUPPORTED and MPI_ASYNC_PROTECTS_NONBLOCKING + # and might vary between the different methods of consumption. + if(MPI_DETERMINE_Fortran_CAPABILITIES AND NOT MPI_Fortran_CAPABILITIES_DETERMINED) + foreach(mpimethod IN ITEMS F08_MODULE F90_MODULE F77_HEADER) + if(MPI_${LANG}_HAVE_${mpimethod}) + set(MPI_${LANG}_${mpimethod}_SUBARRAYS FALSE) + set(MPI_${LANG}_${mpimethod}_ASYNCPROT FALSE) + _MPI_try_staged_settings(${LANG} fortranparam_mpi ${mpimethod} TRUE) + if(MPI_RESULT_${LANG}_fortranparam_mpi_${mpimethod} AND + NOT "${MPI_RUN_RESULT_${LANG}_fortranparam_mpi_${mpimethod}}" STREQUAL "FAILED_TO_RUN") + if("${MPI_RUN_OUTPUT_${LANG}_fortranparam_mpi_${mpimethod}}" MATCHES + ".*INFO:SUBARRAYS\\[ *([TF]) *\\]-ASYNCPROT\\[ *([TF]) *\\].*") + if("${CMAKE_MATCH_1}" STREQUAL "T") + set(MPI_${LANG}_${mpimethod}_SUBARRAYS TRUE) + endif() + if("${CMAKE_MATCH_2}" STREQUAL "T") + set(MPI_${LANG}_${mpimethod}_ASYNCPROT TRUE) + endif() + endif() + endif() + endif() + endforeach() + set(MPI_Fortran_CAPABILITIES_DETERMINED TRUE) + endif() + else() + set(MPI_${LANG}_HIGHEST_METHOD normal) + + # By the MPI-2 standard, MPI_VERSION and MPI_SUBVERSION are valid for both C and C++ bindings. + if(NOT DEFINED MPI_${LANG}_VERSION) + file(STRINGS ${MPI_BIN_FOLDER}/test_mpi_${LANG}.bin _MPI_VERSION_STRING LIMIT_COUNT 1 REGEX "INFO:MPI-VER") + if("${_MPI_VERSION_STRING}" MATCHES ".*INFO:MPI-VER\\[([0-9]+)\\.([0-9]+)\\].*") + set(MPI_${LANG}_VERSION_MAJOR "${CMAKE_MATCH_1}") + set(MPI_${LANG}_VERSION_MINOR "${CMAKE_MATCH_2}") + set(MPI_${LANG}_VERSION "${MPI_${LANG}_VERSION_MAJOR}.${MPI_${LANG}_VERSION_MINOR}") + endif() + endif() + endif() + + unset(MPI_BIN_FOLDER) + + # At this point, we have dealt with determining the MPI version and parameters for each Fortran method available. + # The one remaining issue is to determine which MPI library is installed. + # Determining the version and vendor of the MPI library is only possible via MPI_Get_library_version() at runtime, + # and therefore we cannot do this while cross-compiling (a user may still define MPI_<lang>_LIBRARY_VERSION_STRING + # themselves and we'll attempt splitting it, which is equivalent to provide the try_run output). + # It's also worth noting that the installed version string can depend on the language, or on the system the binary + # runs on if MPI is not statically linked. + if(MPI_DETERMINE_LIBRARY_VERSION AND NOT MPI_${LANG}_LIBRARY_VERSION_STRING) + _MPI_try_staged_settings(${LANG} libver_mpi ${MPI_${LANG}_HIGHEST_METHOD} TRUE) + if(MPI_RESULT_${LANG}_libver_mpi_${MPI_${LANG}_HIGHEST_METHOD} AND + "${MPI_RUN_RESULT_${LANG}_libver_mpi_${MPI_${LANG}_HIGHEST_METHOD}}" EQUAL "0") + string(STRIP "${MPI_RUN_OUTPUT_${LANG}_libver_mpi_${MPI_${LANG}_HIGHEST_METHOD}}" + MPI_${LANG}_LIBRARY_VERSION_STRING) + else() + set(MPI_${LANG}_LIBRARY_VERSION_STRING "NOTFOUND") + endif() + endif() + endif() + + set(MPI_${LANG}_FIND_QUIETLY ${MPI_FIND_QUIETLY}) + set(MPI_${LANG}_FIND_VERSION ${MPI_FIND_VERSION}) + set(MPI_${LANG}_FIND_VERSION_EXACT ${MPI_FIND_VERSION_EXACT}) + + unset(MPI_${LANG}_REQUIRED_VARS) + if (MPI_${LANG}_WRAPPER_FOUND OR MPI_${LANG}_GUESS_FOUND) + foreach(mpilibname IN LISTS MPI_${LANG}_LIB_NAMES) + list(APPEND MPI_${LANG}_REQUIRED_VARS "MPI_${mpilibname}_LIBRARY") + endforeach() + list(APPEND MPI_${LANG}_REQUIRED_VARS "MPI_${LANG}_LIB_NAMES") + if("${LANG}" STREQUAL "Fortran") + # For Fortran we only need one of the module or header directories to have *some* support for MPI. + if(NOT MPI_${LANG}_MODULE_DIR) + list(APPEND MPI_${LANG}_REQUIRED_VARS "MPI_${LANG}_F77_HEADER_DIR") + endif() + if(NOT MPI_${LANG}_F77_HEADER_DIR) + list(APPEND MPI_${LANG}_REQUIRED_VARS "MPI_${LANG}_MODULE_DIR") + endif() + else() + list(APPEND MPI_${LANG}_REQUIRED_VARS "MPI_${LANG}_HEADER_DIR") + endif() + if(MPI_${LANG}_ADDITIONAL_INCLUDE_VARS) + foreach(mpiincvar IN LISTS MPI_${LANG}_ADDITIONAL_INCLUDE_VARS) + list(APPEND MPI_${LANG}_REQUIRED_VARS "MPI_${mpiincvar}_INCLUDE_DIR") + endforeach() + endif() + # Append the works variable now. If the settings did not work, this will show up properly. + list(APPEND MPI_${LANG}_REQUIRED_VARS "MPI_${LANG}_WORKS") else() - find_package_handle_standard_args(MPI_${lang} DEFAULT_MSG MPI_${lang}_LIBRARIES MPI_${lang}_INCLUDE_PATH) + # If the compiler worked implicitly, use its path as output. + # Should the compiler variable be set, we also require it to work. + list(APPEND MPI_${LANG}_REQUIRED_VARS "MPI_${LANG}_COMPILER") + if(MPI_${LANG}_COMPILER) + list(APPEND MPI_${LANG}_REQUIRED_VARS "MPI_${LANG}_WORKS") + endif() endif() + find_package_handle_standard_args(MPI_${LANG} REQUIRED_VARS ${MPI_${LANG}_REQUIRED_VARS} + VERSION_VAR MPI_${LANG}_VERSION) + + if(DEFINED MPI_${LANG}_VERSION) + if(NOT _MPI_MIN_VERSION OR _MPI_MIN_VERSION VERSION_GREATER MPI_${LANG}_VERSION) + set(_MPI_MIN_VERSION MPI_${LANG}_VERSION) + endif() + endif() + endif() +endforeach() + +unset(_MPI_REQ_VARS) +foreach(LANG IN ITEMS C CXX Fortran) + if((NOT MPI_FIND_COMPONENTS AND CMAKE_${LANG}_COMPILER_LOADED) OR LANG IN_LIST MPI_FIND_COMPONENTS) + list(APPEND _MPI_REQ_VARS "MPI_${LANG}_FOUND") endif() endforeach() +if(MPICXX IN_LIST MPI_FIND_COMPONENTS) + list(APPEND _MPI_REQ_VARS "MPI_MPICXX_FOUND") +endif() + +find_package_handle_standard_args(MPI + REQUIRED_VARS ${_MPI_REQ_VARS} + VERSION_VAR ${_MPI_MIN_VERSION} + HANDLE_COMPONENTS) #============================================================================= # More backward compatibility stuff -# -# Bare MPI sans ${lang} vars are set to CXX then C, depending on what was found. + +# For compatibility reasons, we also define MPIEXEC +set(MPIEXEC "${MPIEXEC_EXECUTABLE}") + +# Copy over MPI_<LANG>_INCLUDE_PATH from the assembled INCLUDE_DIRS. +foreach(LANG IN ITEMS C CXX Fortran) + if(MPI_${LANG}_FOUND) + set(MPI_${LANG}_INCLUDE_PATH "${MPI_${LANG}_INCLUDE_DIRS}") + unset(MPI_${LANG}_COMPILE_FLAGS) + if(MPI_${LANG}_COMPILE_OPTIONS) + set(MPI_${LANG}_COMPILE_FLAGS "${MPI_${LANG}_COMPILE_OPTIONS}") + endif() + if(MPI_${LANG}_COMPILE_DEFINITIONS) + foreach(_MPI_DEF IN LISTS MPI_${LANG}_COMPILE_DEFINITIONS) + string(APPEND MPI_${LANG}_COMPILE_FLAGS " -D${_MPI_DEF}") + endforeach() + endif() + endif() +endforeach() + +# Bare MPI sans ${LANG} vars are set to CXX then C, depending on what was found. # This mimics the behavior of the old language-oblivious FindMPI. -set(_MPI_OLD_VARS FOUND COMPILER INCLUDE_PATH COMPILE_FLAGS LINK_FLAGS LIBRARIES) +set(_MPI_OLD_VARS COMPILER INCLUDE_PATH COMPILE_FLAGS LINK_FLAGS LIBRARIES) if (MPI_CXX_FOUND) foreach (var ${_MPI_OLD_VARS}) set(MPI_${var} ${MPI_CXX_${var}}) @@ -661,26 +1428,25 @@ elseif (MPI_C_FOUND) foreach (var ${_MPI_OLD_VARS}) set(MPI_${var} ${MPI_C_${var}}) endforeach() -else() - # Note that we might still have found Fortran, but you'll need to use MPI_Fortran_FOUND - set(MPI_FOUND FALSE) endif() # Chop MPI_LIBRARIES into the old-style MPI_LIBRARY and MPI_EXTRA_LIBRARY, and set them in cache. if (MPI_LIBRARIES) list(GET MPI_LIBRARIES 0 MPI_LIBRARY_WORK) - set(MPI_LIBRARY ${MPI_LIBRARY_WORK} CACHE FILEPATH "MPI library to link against" FORCE) + set(MPI_LIBRARY "${MPI_LIBRARY_WORK}") + unset(MPI_LIBRARY_WORK) else() - set(MPI_LIBRARY "MPI_LIBRARY-NOTFOUND" CACHE FILEPATH "MPI library to link against" FORCE) + set(MPI_LIBRARY "MPI_LIBRARY-NOTFOUND") endif() list(LENGTH MPI_LIBRARIES MPI_NUMLIBS) if (MPI_NUMLIBS GREATER 1) - set(MPI_EXTRA_LIBRARY_WORK ${MPI_LIBRARIES}) + set(MPI_EXTRA_LIBRARY_WORK "${MPI_LIBRARIES}") list(REMOVE_AT MPI_EXTRA_LIBRARY_WORK 0) - set(MPI_EXTRA_LIBRARY ${MPI_EXTRA_LIBRARY_WORK} CACHE STRING "Extra MPI libraries to link against" FORCE) + set(MPI_EXTRA_LIBRARY "${MPI_EXTRA_LIBRARY_WORK}") + unset(MPI_EXTRA_LIBRARY_WORK) else() - set(MPI_EXTRA_LIBRARY "MPI_EXTRA_LIBRARY-NOTFOUND" CACHE STRING "Extra MPI libraries to link against" FORCE) + set(MPI_EXTRA_LIBRARY "MPI_EXTRA_LIBRARY-NOTFOUND") endif() #============================================================================= @@ -689,5 +1455,7 @@ unset(_MPI_OLD_VARS) unset(_MPI_PREFIX_PATH) unset(_MPI_BASE_DIR) foreach (lang C CXX Fortran) - unset(_MPI_${lang}_COMPILER_NAMES) + unset(_MPI_${LANG}_COMPILER_NAMES) endforeach() + +cmake_policy(POP) diff --git a/config/cmake_ext_mod/FindMPI/fortranparam_mpi.f90.in b/config/cmake_ext_mod/FindMPI/fortranparam_mpi.f90.in new file mode 100644 index 0000000..30f912c --- /dev/null +++ b/config/cmake_ext_mod/FindMPI/fortranparam_mpi.f90.in @@ -0,0 +1,4 @@ + program mpi_ver + @MPI_Fortran_INCLUDE_LINE@ + print *, 'INFO:SUBARRAYS[', MPI_SUBARRAYS_SUPPORTED, ']-ASYNCPROT[', MPI_ASYNC_PROTECTS_NONBLOCKING, ']' + end program mpi_ver diff --git a/config/cmake_ext_mod/FindMPI/libver_mpi.c b/config/cmake_ext_mod/FindMPI/libver_mpi.c new file mode 100644 index 0000000..be9d19d --- /dev/null +++ b/config/cmake_ext_mod/FindMPI/libver_mpi.c @@ -0,0 +1,19 @@ +#include <mpi.h> + +#ifdef __cplusplus +#include <cstdio> +#else +#include <stdio.h> +#endif + +int main(int argc, char* argv[]) +{ + char mpilibver_str[MPI_MAX_LIBRARY_VERSION_STRING]; + int mpilibver_len; + MPI_Get_library_version(mpilibver_str, &mpilibver_len); +#ifdef __cplusplus + std::puts(mpilibver_str); +#else + puts(mpilibver_str); +#endif +} diff --git a/config/cmake_ext_mod/FindMPI/libver_mpi.f90.in b/config/cmake_ext_mod/FindMPI/libver_mpi.f90.in new file mode 100644 index 0000000..7938587 --- /dev/null +++ b/config/cmake_ext_mod/FindMPI/libver_mpi.f90.in @@ -0,0 +1,7 @@ + program mpi_ver + @MPI_Fortran_INCLUDE_LINE@ + character(len=MPI_MAX_LIBRARY_VERSION_STRING) :: mpilibver_str + integer(kind=MPI_INTEGER_KIND) :: ierror, reslen + call MPI_GET_LIBRARY_VERSION(mpilibver_str, reslen, ierror) + print *, mpilibver_str + end program mpi_ver diff --git a/config/cmake_ext_mod/FindMPI/mpiver.f90.in b/config/cmake_ext_mod/FindMPI/mpiver.f90.in new file mode 100644 index 0000000..a254523 --- /dev/null +++ b/config/cmake_ext_mod/FindMPI/mpiver.f90.in @@ -0,0 +1,10 @@ + program mpi_ver + @MPI_Fortran_INCLUDE_LINE@ + integer(kind=kind(MPI_VERSION)), parameter :: zero = ichar('0') + character, dimension(17), parameter :: mpiver_str =& + (/ 'I', 'N', 'F', 'O', ':', 'M', 'P', 'I', '-', 'V', 'E', 'R', '[', & + char(zero + MPI_VERSION), & + '.', & + char(zero + MPI_SUBVERSION), ']' /) + print *, mpiver_str + end program mpi_ver diff --git a/config/cmake_ext_mod/FindMPI/test_mpi.c b/config/cmake_ext_mod/FindMPI/test_mpi.c new file mode 100644 index 0000000..b8a308a --- /dev/null +++ b/config/cmake_ext_mod/FindMPI/test_mpi.c @@ -0,0 +1,37 @@ +#include <mpi.h> + +#ifdef __cplusplus +#include <cstdio> +#else +#include <stdio.h> +#endif + +#if defined(MPI_VERSION) && defined(MPI_SUBVERSION) +const char mpiver_str[] = { 'I', 'N', + 'F', 'O', + ':', 'M', + 'P', 'I', + '-', 'V', + 'E', 'R', + '[', ('0' + MPI_VERSION), + '.', ('0' + MPI_SUBVERSION), + ']', '\0' }; +#endif + +int main(int argc, char* argv[]) +{ +#if defined(MPI_VERSION) && defined(MPI_SUBVERSION) +#ifdef __cplusplus + std::puts(mpiver_str); +#else + puts(mpiver_str); +#endif +#endif +#ifdef TEST_MPI_MPICXX + MPI::MPI_Init(&argc, &argv); + MPI::MPI_Finalize(); +#else + MPI_Init(&argc, &argv); + MPI_Finalize(); +#endif +} diff --git a/config/cmake_ext_mod/FindMPI/test_mpi.f90.in b/config/cmake_ext_mod/FindMPI/test_mpi.f90.in new file mode 100644 index 0000000..4d43a04 --- /dev/null +++ b/config/cmake_ext_mod/FindMPI/test_mpi.f90.in @@ -0,0 +1,6 @@ + program hello + @MPI_Fortran_INCLUDE_LINE@ + integer@MPI_Fortran_INTEGER_LINE@ ierror + call MPI_INIT(ierror) + call MPI_FINALIZE(ierror) + end program diff --git a/config/cmake_ext_mod/FindSZIP.cmake b/config/cmake_ext_mod/FindSZIP.cmake index 68d2080..699be85 100644 --- a/config/cmake_ext_mod/FindSZIP.cmake +++ b/config/cmake_ext_mod/FindSZIP.cmake @@ -8,7 +8,7 @@ # distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases. # If you do not have access to either file, you may request a copy from # help@hdfgroup.org. - +# # - Find SZIP library # - Derived from the FindTiff.cmake that is included with cmake diff --git a/config/cmake_ext_mod/GetTimeOfDayTest.cpp b/config/cmake_ext_mod/GetTimeOfDayTest.cpp index 8871ebc..5fd7c04 100644 --- a/config/cmake_ext_mod/GetTimeOfDayTest.cpp +++ b/config/cmake_ext_mod/GetTimeOfDayTest.cpp @@ -9,7 +9,6 @@ * If you do not have access to either file, you may request a copy from * * help@hdfgroup.org. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ - #if defined (TRY_SYS_TIME_H) #include <sys/time.h> /* #include <time.h> */ diff --git a/config/cmake_ext_mod/HDFLibMacros.cmake b/config/cmake_ext_mod/HDFLibMacros.cmake index 9de5339..54e408b 100644 --- a/config/cmake_ext_mod/HDFLibMacros.cmake +++ b/config/cmake_ext_mod/HDFLibMacros.cmake @@ -8,7 +8,7 @@ # distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases. # If you do not have access to either file, you may request a copy from # help@hdfgroup.org. - +# #------------------------------------------------------------------------------- macro (EXTERNAL_JPEG_LIBRARY compress_type jpeg_pic) # May need to build JPEG with PIC on x64 machines with gcc @@ -74,14 +74,14 @@ macro (EXTERNAL_JPEG_LIBRARY compress_type jpeg_pic) HDF_IMPORT_SET_LIB_OPTIONS (jpeg-static "jpeg" STATIC "") add_dependencies (JPEG jpeg-static) set (JPEG_STATIC_LIBRARY "jpeg-static") - set (JPEG_LIBRARIES ${JPEG_static_LIBRARY}) + set (JPEG_LIBRARIES ${JPEG_STATIC_LIBRARY}) if (BUILD_SHARED_LIBS) # Create imported target jpeg-shared add_library(jpeg-shared SHARED IMPORTED) HDF_IMPORT_SET_LIB_OPTIONS (jpeg-shared "jpeg" SHARED "") add_dependencies (JPEG jpeg-shared) set (JPEG_SHARED_LIBRARY "jpeg-shared") - set (JPEG_LIBRARIES ${JPEG_LIBRARIES} ${JPEG_shared_LIBRARY}) + set (JPEG_LIBRARIES ${JPEG_LIBRARIES} ${JPEG_SHARED_LIBRARY}) endif () set (JPEG_INCLUDE_DIR_GEN "${BINARY_DIR}") @@ -167,14 +167,14 @@ macro (EXTERNAL_SZIP_LIBRARY compress_type encoding) HDF_IMPORT_SET_LIB_OPTIONS (szip-static "szip" STATIC "") add_dependencies (SZIP szip-static) set (SZIP_STATIC_LIBRARY "szip-static") - set (SZIP_LIBRARIES ${SZIP_static_LIBRARY}) + set (SZIP_LIBRARIES ${SZIP_STATIC_LIBRARY}) if (BUILD_SHARED_LIBS) # Create imported target szip-shared add_library(szip-shared SHARED IMPORTED) HDF_IMPORT_SET_LIB_OPTIONS (szip-shared "szip" SHARED "") add_dependencies (SZIP szip-shared) set (SZIP_SHARED_LIBRARY "szip-shared") - set (SZIP_LIBRARIES ${SZIP_LIBRARIES} ${SZIP_shared_LIBRARY}) + set (SZIP_LIBRARIES ${SZIP_LIBRARIES} ${SZIP_SHARED_LIBRARY}) endif () set (SZIP_INCLUDE_DIR_GEN "${BINARY_DIR}") @@ -262,7 +262,7 @@ macro (EXTERNAL_ZLIB_LIBRARY compress_type) HDF_IMPORT_SET_LIB_OPTIONS (zlib-static ${ZLIB_LIB_NAME} STATIC "") add_dependencies (ZLIB zlib-static) set (ZLIB_STATIC_LIBRARY "zlib-static") - set (ZLIB_LIBRARIES ${ZLIB_static_LIBRARY}) + set (ZLIB_LIBRARIES ${ZLIB_STATIC_LIBRARY}) if (BUILD_SHARED_LIBS) # Create imported target zlib-shared add_library(zlib-shared SHARED IMPORTED) diff --git a/config/cmake_ext_mod/HDFMacros.cmake b/config/cmake_ext_mod/HDFMacros.cmake index 64f6f8d..602b6bf 100644 --- a/config/cmake_ext_mod/HDFMacros.cmake +++ b/config/cmake_ext_mod/HDFMacros.cmake @@ -8,7 +8,7 @@ # distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases. # If you do not have access to either file, you may request a copy from # help@hdfgroup.org. - +# #------------------------------------------------------------------------------- macro (SET_GLOBAL_VARIABLE name value) set (${name} ${value} CACHE INTERNAL "Used to pass variables between directories" FORCE) diff --git a/config/cmake_ext_mod/HDFTests.c b/config/cmake_ext_mod/HDFTests.c index e8353f5..60ac744 100644 --- a/config/cmake_ext_mod/HDFTests.c +++ b/config/cmake_ext_mod/HDFTests.c @@ -9,7 +9,6 @@ * If you do not have access to either file, you may request a copy from * * help@hdfgroup.org. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ - #define SIMPLE_TEST(x) int main(){ x; return 0; } #ifdef HAVE_C99_DESIGNATED_INITIALIZER diff --git a/config/cmake_ext_mod/HDFUseFortran.cmake b/config/cmake_ext_mod/HDFUseFortran.cmake index 5a2885a..7bf4d81 100644 --- a/config/cmake_ext_mod/HDFUseFortran.cmake +++ b/config/cmake_ext_mod/HDFUseFortran.cmake @@ -8,7 +8,7 @@ # distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases. # If you do not have access to either file, you may request a copy from # help@hdfgroup.org. - +# # # This file provides functions for Fortran support. # diff --git a/config/cmake_ext_mod/grepTest.cmake b/config/cmake_ext_mod/grepTest.cmake index 82ac090..b812d73 100644 --- a/config/cmake_ext_mod/grepTest.cmake +++ b/config/cmake_ext_mod/grepTest.cmake @@ -8,7 +8,7 @@ # distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases. # If you do not have access to either file, you may request a copy from # help@hdfgroup.org. - +# # grepTest.cmake executes a command and captures the output in a file. File is then compared # against a reference file. Exit status of command can also be compared. @@ -57,15 +57,15 @@ file (READ ${TEST_FOLDER}/${TEST_OUTPUT} TEST_STREAM) # TEST_REFERENCE should always be matched string (REGEX MATCH "${TEST_REFERENCE}" TEST_MATCH ${TEST_STREAM}) string (COMPARE EQUAL "${TEST_REFERENCE}" "${TEST_MATCH}" TEST_RESULT) -if (${TEST_RESULT} STREQUAL "0") +if ("${TEST_RESULT}" STREQUAL "0") message (FATAL_ERROR "Failed: The output of ${TEST_PROGRAM} did not contain ${TEST_REFERENCE}") endif () string (REGEX MATCH "${TEST_FILTER}" TEST_MATCH ${TEST_STREAM}) -if (${TEST_EXPECT} STREQUAL "1") +if ("${TEST_EXPECT}" STREQUAL "1") # TEST_EXPECT (1) interperts TEST_FILTER as NOT to match string (LENGTH "${TEST_MATCH}" TEST_RESULT) - if (NOT ${TEST_RESULT} STREQUAL "0") + if (NOT "${TEST_RESULT}" STREQUAL "0") message (FATAL_ERROR "Failed: The output of ${TEST_PROGRAM} did contain ${TEST_FILTER}") endif () endif () diff --git a/config/cmake_ext_mod/runTest.cmake b/config/cmake_ext_mod/runTest.cmake index 0a9ebd1..2479728 100644 --- a/config/cmake_ext_mod/runTest.cmake +++ b/config/cmake_ext_mod/runTest.cmake @@ -8,7 +8,7 @@ # distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases. # If you do not have access to either file, you may request a copy from # help@hdfgroup.org. - +# # runTest.cmake executes a command and captures the output in a file. File is then compared # against a reference file. Exit status of command can also be compared. cmake_policy(SET CMP0007 NEW) @@ -87,7 +87,7 @@ if (TEST_REGEX) file (READ ${TEST_FOLDER}/${TEST_OUTPUT} TEST_STREAM) string (REGEX MATCH "${TEST_REGEX}" REGEX_MATCH ${TEST_STREAM}) string (COMPARE EQUAL "${REGEX_MATCH}" "${TEST_MATCH}" REGEX_RESULT) - if (${REGEX_RESULT} STREQUAL "0") + if ("${REGEX_RESULT}" STREQUAL "0") message (STATUS "Failed: The output of ${TEST_PROGRAM} did not contain ${TEST_MATCH}") endif () endif () @@ -106,7 +106,7 @@ if (TEST_APPEND) endif () # if the return value is !=${TEST_EXPECT} bail out -if (NOT ${TEST_RESULT} STREQUAL ${TEST_EXPECT}) +if (NOT "${TEST_RESULT}" STREQUAL "${TEST_EXPECT}") if (NOT TEST_NOERRDISPLAY) if (EXISTS ${TEST_FOLDER}/${TEST_OUTPUT}) file (READ ${TEST_FOLDER}/${TEST_OUTPUT} TEST_STREAM) @@ -193,13 +193,13 @@ if (NOT TEST_SKIP_COMPARE) endif () endif () - if (NOT ${TEST_RESULT} STREQUAL 0) + if (NOT "${TEST_RESULT}" STREQUAL "0") set (TEST_RESULT 0) file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT} test_act) list (LENGTH test_act len_act) file (STRINGS ${TEST_FOLDER}/${TEST_REFERENCE} test_ref) list (LENGTH test_ref len_ref) - if (NOT ${len_act} STREQUAL "0" AND NOT ${len_ref} STREQUAL "0") + if (NOT "${len_act}" STREQUAL "0" AND NOT "${len_ref}" STREQUAL "0") math (EXPR _FP_LEN "${len_ref} - 1") foreach (line RANGE 0 ${_FP_LEN}) list (GET test_act ${line} str_act) @@ -212,14 +212,14 @@ if (NOT TEST_SKIP_COMPARE) endif () endforeach () else () - if (${len_act} STREQUAL "0") + if ("${len_act}" STREQUAL "0") message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_OUTPUT} is empty") endif () - if (${len_ref} STREQUAL "0") + if ("${len_ref}" STREQUAL "0") message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_REFERENCE} is empty") endif () endif () - if (NOT ${len_act} STREQUAL ${len_ref}) + if (NOT "${len_act}" STREQUAL "${len_ref}") set (TEST_RESULT 1) endif () endif () @@ -227,7 +227,7 @@ if (NOT TEST_SKIP_COMPARE) message (STATUS "COMPARE Result: ${TEST_RESULT}") # again, if return value is !=0 scream and shout - if (NOT ${TEST_RESULT} STREQUAL 0) + if (NOT "${TEST_RESULT}" STREQUAL "0") message (FATAL_ERROR "Failed: The output of ${TEST_OUTPUT} did not match ${TEST_REFERENCE}") endif () @@ -243,14 +243,14 @@ if (NOT TEST_SKIP_COMPARE) COMMAND ${CMAKE_COMMAND} -E compare_files ${TEST_FOLDER}/${TEST_OUTPUT}.err ${TEST_FOLDER}/${TEST_ERRREF} RESULT_VARIABLE TEST_RESULT ) - if (NOT ${TEST_RESULT} STREQUAL 0) + if (NOT "${TEST_RESULT}" STREQUAL "0") set (TEST_RESULT 0) file (STRINGS ${TEST_FOLDER}/${TEST_OUTPUT}.err test_act) list (LENGTH test_act len_act) file (STRINGS ${TEST_FOLDER}/${TEST_ERRREF} test_ref) list (LENGTH test_ref len_ref) math (EXPR _FP_LEN "${len_ref} - 1") - if (NOT ${len_act} STREQUAL "0" AND NOT ${len_ref} STREQUAL "0") + if (NOT "${len_act}" STREQUAL "0" AND NOT "${len_ref}" STREQUAL "0") math (EXPR _FP_LEN "${len_ref} - 1") foreach (line RANGE 0 ${_FP_LEN}) list (GET test_act ${line} str_act) @@ -263,14 +263,14 @@ if (NOT TEST_SKIP_COMPARE) endif () endforeach () else () - if (${len_act} STREQUAL "0") + if ("${len_act}" STREQUAL "0") message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_OUTPUT}.err is empty") endif () - if (${len_ref} STREQUAL "0") + if ("${len_ref}" STREQUAL "0") message (STATUS "COMPARE Failed: ${TEST_FOLDER}/${TEST_ERRREF} is empty") endif () endif () - if (NOT ${len_act} STREQUAL ${len_ref}) + if (NOT "${len_act}" STREQUAL "${len_ref}") set (TEST_RESULT 1) endif () endif () @@ -278,7 +278,7 @@ if (NOT TEST_SKIP_COMPARE) message (STATUS "COMPARE Result: ${TEST_RESULT}") # again, if return value is !=0 scream and shout - if (NOT ${TEST_RESULT} STREQUAL 0) + if (NOT "${TEST_RESULT}" STREQUAL "0") message (FATAL_ERROR "Failed: The error output of ${TEST_OUTPUT}.err did not match ${TEST_ERRREF}") endif () endif () |