diff options
Diffstat (limited to 'hl/c++/examples')
| -rw-r--r-- | hl/c++/examples/CMakeLists.txt | 42 | ||||
| -rw-r--r-- | hl/c++/examples/CMakeTests.cmake | 6 | ||||
| -rw-r--r-- | hl/c++/examples/Makefile.am | 6 | ||||
| -rw-r--r-- | hl/c++/examples/Makefile.in | 32 | ||||
| -rw-r--r-- | hl/c++/examples/ptExampleFL.cpp | 53 | ||||
| -rw-r--r-- | hl/c++/examples/run-hlc++-ex.sh.in | 30 |
6 files changed, 108 insertions, 61 deletions
diff --git a/hl/c++/examples/CMakeLists.txt b/hl/c++/examples/CMakeLists.txt index 25158f2..bfad538 100644 --- a/hl/c++/examples/CMakeLists.txt +++ b/hl/c++/examples/CMakeLists.txt @@ -1,25 +1,35 @@ -cmake_minimum_required (VERSION 3.10) -PROJECT (HDF5_HL_CPP_EXAMPLES) - -#----------------------------------------------------------------------------- -# Setup include Directories -#----------------------------------------------------------------------------- -INCLUDE_DIRECTORIES (${HDF5_HL_SRC_DIR}/src) -INCLUDE_DIRECTORIES (${HDF5_HL_CPP_SRC_DIR}/src) +cmake_minimum_required (VERSION 3.12) +project (HDF5_HL_CPP_EXAMPLES CXX) # -------------------------------------------------------------------- # Add in the examples for the Packet Table codes # -------------------------------------------------------------------- add_executable (ptExampleFL ${HDF5_HL_CPP_EXAMPLES_SOURCE_DIR}/ptExampleFL.cpp) -TARGET_C_PROPERTIES (ptExampleFL STATIC " " " ") -target_link_libraries ( - ptExampleFL - ${HDF5_HL_CPP_LIB_TARGET} - ${HDF5_HL_LIB_TARGET} - ${HDF5_LIB_TARGET} -) +target_include_directories (ptExampleFL PRIVATE "${HDF5_SRC_DIR};${HDF5_SRC_BINARY_DIR};$<$<BOOL:${HDF5_ENABLE_PARALLEL}>:${MPI_C_INCLUDE_DIRS}>") +if (NOT BUILD_SHARED_LIBS) + TARGET_C_PROPERTIES (ptExampleFL STATIC) + target_link_libraries (ptExampleFL PRIVATE + ${HDF5_HL_CPP_LIB_TARGET} + ${HDF5_HL_LIB_TARGET} + ${HDF5_LIB_TARGET} + ) +else () + TARGET_C_PROPERTIES (ptExampleFL SHARED) + target_link_libraries (ptExampleFL PRIVATE + ${HDF5_HL_CPP_LIBSH_TARGET} + ${HDF5_HL_LIBSH_TARGET} + ${HDF5_LIBSH_TARGET} + ) +endif () set_target_properties (ptExampleFL PROPERTIES FOLDER examples/hl/cpp) -if (BUILD_TESTING) +#----------------------------------------------------------------------------- +# Add Target to clang-format +#----------------------------------------------------------------------------- +if (HDF5_ENABLE_FORMATTERS) + clang_format (HDF5_HL_CPP_EXAMPLES_FORMAT ptExampleFL) +endif () + +if (BUILD_TESTING AND HDF5_TEST_CPP AND HDF5_TEST_EXAMPLES AND HDF5_TEST_SERIAL) include (CMakeTests.cmake) endif () diff --git a/hl/c++/examples/CMakeTests.cmake b/hl/c++/examples/CMakeTests.cmake index 103ec2b..82b32cf 100644 --- a/hl/c++/examples/CMakeTests.cmake +++ b/hl/c++/examples/CMakeTests.cmake @@ -5,7 +5,7 @@ # This file is part of HDF5. The full HDF5 copyright notice, including # terms governing use, modification, and redistribution, is contained in # the COPYING file, which can be found at the root of the source code -# distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases. +# distribution tree, or in https://www.hdfgroup.org/licenses. # If you do not have access to either file, you may request a copy from # help@hdfgroup.org. # @@ -21,12 +21,14 @@ add_test ( COMMAND ${CMAKE_COMMAND} -E remove PTcppexampleFL.h5 + ptExampleFL.txt ) if (HDF5_ENABLE_USING_MEMCHECKER) - add_test (NAME HL_CPP_ex_ptExampleFL COMMAND $<TARGET_FILE:ptExampleFL>) + add_test (NAME HL_CPP_ex_ptExampleFL COMMAND ${CMAKE_CROSSCOMPILING_EMULATOR} $<TARGET_FILE:ptExampleFL>) else () add_test (NAME HL_CPP_ex_ptExampleFL COMMAND "${CMAKE_COMMAND}" + -D "TEST_EMULATOR=${CMAKE_CROSSCOMPILING_EMULATOR}" -D "TEST_PROGRAM=$<TARGET_FILE:ptExampleFL>" -D "TEST_ARGS:STRING=" -D "TEST_EXPECT=0" diff --git a/hl/c++/examples/Makefile.am b/hl/c++/examples/Makefile.am index ce719f5..6b5d7d1 100644 --- a/hl/c++/examples/Makefile.am +++ b/hl/c++/examples/Makefile.am @@ -6,7 +6,7 @@ # This file is part of HDF5. The full HDF5 copyright notice, including # terms governing use, modification, and redistribution, is contained in # the COPYING file, which can be found at the root of the source code -# distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases. +# distribution tree, or in https://www.hdfgroup.org/licenses. # If you do not have access to either file, you may request a copy from # help@hdfgroup.org. ## @@ -33,8 +33,8 @@ CXX_API=yes # Where to install examples # Note: no '/' after DESTDIR. Explanation in commence.am -EXAMPLEDIR=${DESTDIR}$(exec_prefix)/share/hdf5_examples/hl/c++ -EXAMPLETOPDIR=${DESTDIR}$(exec_prefix)/share/hdf5_examples/hl +EXAMPLEDIR=$(examplesdir)/hl/c++ +EXAMPLETOPDIR=$(examplesdir)/hl # How to build programs using h5c++ $(EXTRA_PROG): $(H5CPP) diff --git a/hl/c++/examples/Makefile.in b/hl/c++/examples/Makefile.in index f69cc76..62bb996 100644 --- a/hl/c++/examples/Makefile.in +++ b/hl/c++/examples/Makefile.in @@ -22,7 +22,7 @@ # This file is part of HDF5. The full HDF5 copyright notice, including # terms governing use, modification, and redistribution, is contained in # the COPYING file, which can be found at the root of the source code -# distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases. +# distribution tree, or in https://www.hdfgroup.org/licenses. # If you do not have access to either file, you may request a copy from # help@hdfgroup.org. # @@ -353,9 +353,9 @@ AMTAR = @AMTAR@ # AM_CFLAGS is an automake construct which should be used by Makefiles # instead of CFLAGS, as CFLAGS is reserved solely for the user to define. # This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well. -AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@ +AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@ @H5_ECFLAGS@ AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@ -AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@ +AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@ @H5_ECXXFLAGS@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@ AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@ @@ -370,6 +370,7 @@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CC_VERSION = @CC_VERSION@ CFLAGS = @CFLAGS@ +CLANG_SANITIZE_CHECKS = @CLANG_SANITIZE_CHECKS@ CLEARFILEBUF = @CLEARFILEBUF@ CODESTACK = @CODESTACK@ CONFIG_DATE = @CONFIG_DATE@ @@ -388,6 +389,7 @@ DEFAULT_API_VERSION = @DEFAULT_API_VERSION@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@ +DEV_WARNINGS = @DEV_WARNINGS@ DIRECT_VFD = @DIRECT_VFD@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ @@ -415,6 +417,8 @@ GREP = @GREP@ H5_CFLAGS = @H5_CFLAGS@ H5_CPPFLAGS = @H5_CPPFLAGS@ H5_CXXFLAGS = @H5_CXXFLAGS@ +H5_ECFLAGS = @H5_ECFLAGS@ +H5_ECXXFLAGS = @H5_ECXXFLAGS@ H5_FCFLAGS = @H5_FCFLAGS@ H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@ H5_LDFLAGS = @H5_LDFLAGS@ @@ -422,9 +426,12 @@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HAVE_DMALLOC = @HAVE_DMALLOC@ HAVE_FORTRAN_2003 = @HAVE_FORTRAN_2003@ +HAVE_LIBHDFS = @HAVE_LIBHDFS@ HAVE_PTHREAD = @HAVE_PTHREAD@ HDF5_HL = @HDF5_HL@ HDF5_INTERFACES = @HDF5_INTERFACES@ +HDF5_TESTS = @HDF5_TESTS@ +HDF5_TOOLS = @HDF5_TOOLS@ HDF_CXX = @HDF_CXX@ HDF_FORTRAN = @HDF_FORTRAN@ HDF_FORTRAN2003 = @HDF_FORTRAN2003@ @@ -440,6 +447,7 @@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTRUMENT = @INSTRUMENT@ INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@ +JNI_LDFLAGS = @JNI_LDFLAGS@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ @@ -461,6 +469,7 @@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@ OBJEXT = @OBJEXT@ +OPTIMIZATION = @OPTIMIZATION@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ @@ -473,8 +482,10 @@ PACKAGE_VERSION = @PACKAGE_VERSION@ PARALLEL = @PARALLEL@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ +PROFILING = @PROFILING@ RANLIB = @RANLIB@ ROOT = @ROOT@ +ROS3_VFD = @ROS3_VFD@ RUNPARALLEL = @RUNPARALLEL@ RUNSERIAL = @RUNSERIAL@ R_INTEGER = @R_INTEGER@ @@ -488,6 +499,7 @@ STATIC_EXEC = @STATIC_EXEC@ STATIC_SHARED = @STATIC_SHARED@ STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@ STRIP = @STRIP@ +SYMBOLS = @SYMBOLS@ TESTPARALLEL = @TESTPARALLEL@ THREADSAFE = @THREADSAFE@ TIME = @TIME@ @@ -529,6 +541,7 @@ docdir = $(exec_prefix)/doc dvidir = @dvidir@ enable_shared = @enable_shared@ enable_static = @enable_static@ +examplesdir = @examplesdir@ exec_prefix = @exec_prefix@ fortran_linux_linker_option = @fortran_linux_linker_option@ host = @host@ @@ -627,8 +640,8 @@ CXX_API = yes # Where to install examples # Note: no '/' after DESTDIR. Explanation in commence.am -EXAMPLEDIR = ${DESTDIR}$(exec_prefix)/share/hdf5_examples/hl/c++ -EXAMPLETOPDIR = ${DESTDIR}$(exec_prefix)/share/hdf5_examples/hl +EXAMPLEDIR = $(examplesdir)/hl/c++ +EXAMPLETOPDIR = $(examplesdir)/hl # Assume that all tests in this directory are examples, and tell # conclude.am when to build them. @@ -638,11 +651,11 @@ EXTRA_PROG = $(EXAMPLE_PROG) $(EXAMPLE_PROG_PARA) MOSTLYCLEANFILES = *.raw *.meta *.o CLEANFILES = $(EXAMPLE_PROG) $(EXAMPLE_PROG_PARA) -# Automake needs to be taught how to build lib, dyn, progs, and tests targets. +# Automake needs to be taught how to build lib, progs and tests targets. # These will be filled in automatically for the most part (e.g., # lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and # EXTRA_TEST variables are supplied to allow the user to force targets to -# be built at certain times. +# be built at certain times. LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES) \ $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB) @@ -1097,6 +1110,7 @@ installcheck-local: (cd $(EXAMPLEDIR); \ /bin/sh ./$(TEST_EXAMPLES_SCRIPT);) \ fi + # lib/progs/tests targets recurse into subdirectories. build-* targets # build files in this directory. build-lib: $(LIB) @@ -1132,7 +1146,7 @@ all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS) # make install-doc doesn't do anything outside of doc directory, but # Makefiles should recognize it. # UPDATE: docs no longer reside in this build tree, so this target -# is depreciated. +# is deprecated. install-doc uninstall-doc: @echo "Nothing to be done." @@ -1293,7 +1307,7 @@ build-check-p: $(LIB) $(PROGS) $(chk_TESTS) echo "**** Hint ****"; \ echo "Parallel test files reside in the current directory" \ "by default."; \ - echo "Set HDF5_PARAPREFIX to use another directory. E.g.,"; \ + echo "Set HDF5_PARAPREFIX to use another directory. e.g.,"; \ echo " HDF5_PARAPREFIX=/PFS/user/me"; \ echo " export HDF5_PARAPREFIX"; \ echo " make check"; \ diff --git a/hl/c++/examples/ptExampleFL.cpp b/hl/c++/examples/ptExampleFL.cpp index 26cbf09..7b508b4 100644 --- a/hl/c++/examples/ptExampleFL.cpp +++ b/hl/c++/examples/ptExampleFL.cpp @@ -6,7 +6,7 @@ * This file is part of HDF5. The full HDF5 copyright notice, including * * terms governing use, modification, and redistribution, is contained in * * the COPYING file, which can be found at the root of the source code * - * distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases. * + * distribution tree, or in https://www.hdfgroup.org/licenses. * * If you do not have access to either file, you may request a copy from * * help@hdfgroup.org. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ @@ -22,56 +22,55 @@ *------------------------------------------------------------------------- */ -const char* FILE_NAME("PTcppexampleFL.h5"); -const char* PT_NAME("/examplePacketTable"); +const char *FILE_NAME("PTcppexampleFL.h5"); +const char *PT_NAME("/examplePacketTable"); -int main(void) +int +main(void) { - herr_t err; /* Return value from function calls */ - hid_t fileID; /* HDF5 identifier for file */ - hid_t plistID; /* HDF5 identifier for property list to use compression */ - hsize_t count; /* Number of records in table */ - int x; /* Temporary counter variable */ + herr_t err; /* Return value from function calls */ + hid_t fileID; /* HDF5 identifier for file */ + hid_t plistID; /* HDF5 identifier for property list to use compression */ + hsize_t count; /* Number of records in table */ + int x; /* Temporary counter variable */ /* Buffers to hold data */ int readBuffer[5]; int writeBuffer[5]; /* Initialize buffers */ - for(x=0; x<5; x++) - { - writeBuffer[x]=x; - readBuffer[x] = -1; + for (x = 0; x < 5; x++) { + writeBuffer[x] = x; + readBuffer[x] = -1; } /* Create a new HDF5 file */ fileID = H5Fcreate(FILE_NAME, H5F_ACC_TRUNC, H5P_DEFAULT, H5P_DEFAULT); - if(fileID <0) + if (fileID < 0) fprintf(stderr, "Couldn't create file.\n"); /* Prepare property list to set compression, randomly use deflate with compression level 5. */ plistID = H5Pcreate(H5P_DATASET_CREATE); - err = H5Pset_deflate(plistID, 5); - if(err < 0) + err = H5Pset_deflate(plistID, 5); + if (err < 0) fprintf(stderr, "Error setting compression level."); /* Create a fixed-length packet table. */ FL_PacketTable ptable(fileID, plistID, PT_NAME, H5T_NATIVE_INT, 100); - if(! ptable.IsValid()) + if (!ptable.IsValid()) fprintf(stderr, "Unable to create packet table."); /* Append five packets to the packet table, one at a time */ - for(x=0; x<5; x++) - { - err = ptable.AppendPacket( &(writeBuffer[x]) ); - if(err<0) + for (x = 0; x < 5; x++) { + err = ptable.AppendPacket(&(writeBuffer[x])); + if (err < 0) fprintf(stderr, "Error adding record."); } /* Get the number of packets in the packet table. This should be five. */ count = ptable.GetPacketCount(err); - if(err < 0) + if (err < 0) fprintf(stderr, "Error getting packet count."); printf("Number of packets in packet table after five appends: %d\n", count); @@ -80,10 +79,9 @@ int main(void) ptable.ResetIndex(); /* Iterate through packets, read each one back */ - for(x=0; x<5; x++) - { - err = ptable.GetNextPacket( &(readBuffer[x]) ); - if(err < 0) + for (x = 0; x < 5; x++) { + err = ptable.GetNextPacket(&(readBuffer[x])); + if (err < 0) fprintf(stderr, "Error reading record."); printf("Packet %d's value is %d.\n", x, readBuffer[x]); @@ -93,9 +91,8 @@ int main(void) /* out of scope. */ err = H5Fclose(fileID); - if( err < 0 ) + if (err < 0) fprintf(stderr, "Failed to close file.\n"); return 0; } - diff --git a/hl/c++/examples/run-hlc++-ex.sh.in b/hl/c++/examples/run-hlc++-ex.sh.in index 7443407..86bca01 100644 --- a/hl/c++/examples/run-hlc++-ex.sh.in +++ b/hl/c++/examples/run-hlc++-ex.sh.in @@ -6,7 +6,7 @@ # This file is part of HDF5. The full HDF5 copyright notice, including # terms governing use, modification, and redistribution, is contained in # the COPYING file, which can be found at the root of the source code -# distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases. +# distribution tree, or in https://www.hdfgroup.org/licenses. # If you do not have access to either file, you may request a copy from # help@hdfgroup.org. @@ -18,7 +18,7 @@ # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # This script will compile and run the c++ examples from source files # -# installed in .../share/hdf5_examples/hl/c++ using h5c++. The # +# installed in @examplesdir@/hl/c++ using h5c++. The # # order for running programs with RunTest in the MAIN section below is taken # # from the Makefile. The order is important since some of the test programs # # use data files created by earlier test programs. Any future additions should # @@ -29,9 +29,33 @@ # Initializations EXIT_SUCCESS=0 EXIT_FAILURE=1 + +# +# Try to derive the path to the installation $prefix established +# by ./configure relative to the examples directory established by +# ./configure. If successful, set `prefix_relto_examplesdir` to the +# relative path. Otherwise, set `prefix_relto_examplesdir` to the +# absolute installation $prefix. +# +# This script uses the value of `prefix` in the user's environment, if +# it is set, below. The content of $() is evaluated in a sub-shell, so +# if `prefix` is set in the user's environment, the shell statements in +# $() won't clobbered it. +# +prefix_relto_examplesdir=$( +prefix=@prefix@ +examplesdir=@examplesdir@ +if [ ${examplesdir##${prefix}/} != ${examplesdir} ]; then + echo $(echo ${examplesdir##${prefix}/} | \ + sed 's,[^/][^/]*,..,g') +else + echo $prefix +fi +) + # Where the tool is installed. # default is relative path to installed location of the tools -prefix="${prefix:-../../../../}" +prefix="${prefix:-../../${prefix_relto_examplesdir}}" AR="@AR@" RANLIB="@RANLIB@" H5TOOL="h5c++" # The tool name |