diff options
Diffstat (limited to 'tools/misc/h5cc.in')
| -rw-r--r-- | tools/misc/h5cc.in | 399 |
1 files changed, 0 insertions, 399 deletions
diff --git a/tools/misc/h5cc.in b/tools/misc/h5cc.in deleted file mode 100644 index 9c4e3ca..0000000 --- a/tools/misc/h5cc.in +++ /dev/null @@ -1,399 +0,0 @@ -#! /bin/sh -## -# Copyright by The HDF Group. -# Copyright by the Board of Trustees of the University of Illinois. -# All rights reserved. -# -# This file is part of HDF5. The full HDF5 copyright notice, including -# terms governing use, modification, and redistribution, is contained in -# the COPYING file, which can be found at the root of the source code -# distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases. -# If you do not have access to either file, you may request a copy from -# help@hdfgroup.org. -## - -# This tool is adapted from the mpicc command of the MPICH Software. - -############################################################################ -## ## -## Things You May Have to Modify: ## -## ## -## If the following paths don't point to the place were HDF5 is installed ## -## on your system (i.e., you received a binary distribution or moved the ## -## files from the originally installed directory to another directory) ## -## then modify them accordingly to represent the new paths. ## -## ## -############################################################################ -prefix="@prefix@" -exec_prefix="@exec_prefix@" -libdir="@libdir@" -includedir="@includedir@" -HL="@HL@" - -############################################################################ -## ## -## Things You Can Modify to Override HDF5 Library Build Components: ## -## ## -## (Advanced usage - know what you're doing - you're on your own here.) ## -## The four variables below can be used to insert paths and flags in ## -## CPPFLAGS, CFLAGS, LDFLAGS, or LIBS in the h5cc compile line: ## -## $CLINKER $H5BLD_CPPFLAGS $CPPFLAGS $H5BLD_CFLAGS $CFLAGS $LDFLAGS ## -## $LIBS $clibpath $link_objs $link_args $shared_link ## -## ## -## These settings can be overriden by setting HDF5_CFLAGS, ## -## HDF5_CPPFLAGS, HDF5_LDFLAGS, or HDF5_LIBS in the environment. ## -## ## -############################################################################ -CFLAGSBASE="" -CPPFLAGSBASE="" -LDFLAGSBASE="" -LIBSBASE="" - -############################################################################ -## ## -## You shouldn't have to modify anything below this line. ## -## ## -############################################################################ - -# Constants definitions -EXIT_SUCCESS=0 -EXIT_FAILURE=1 - -host_os="@host_os@" - -prog_name="`basename $0`" - -allargs="" -compile_args="" -libraries="" -link_args="" -link_objs="" -clibpath="" - -do_link="yes" -do_compile="no" -dash_o="no" -dash_c="no" -get_output_file="no" - -SHOW="eval" -CCBASE="@CC@" -CLINKERBASE="@CC@" - -# CFLAGS, CPPFLAGS and LDFLAGS are reserved for use by the script user. -# FLAGS brought from the hdf5 build are put in H5BLD_*FLAGS. - -# User's CPPFLAGS and CFLAGS come after their H5BLD counterparts. User's -# LDFLAGS come just before clibpath, user's LIBS come after $link_objs and -# before the hdf5 libraries in $link_args, followed by any external library -# paths and libraries from AM_LDFLAGS, LDFLAGS, AM_LIBS or LIBS carried in -# from the hdf5 build. The order of the flags is intended to give precedence -# to the user's flags. -H5BLD_CFLAGS="@AM_CFLAGS@ @CFLAGS@" -H5BLD_CPPFLAGS="@AM_CPPFLAGS@ @CPPFLAGS@" -H5BLD_LDFLAGS="@AM_LDFLAGS@ @LDFLAGS@" -H5BLD_LIBS="@LIBS@" - -CC="${HDF5_CC:-$CCBASE}" -CLINKER="${HDF5_CLINKER:-$CLINKERBASE}" -CFLAGS="${HDF5_CFLAGS:-$CFLAGSBASE}" -CPPFLAGS="${HDF5_CPPFLAGS:-$CPPFLAGSBASE}" -LDFLAGS="${HDF5_LDFLAGS:-$LDFLAGSBASE}" -LIBS="${HDF5_LIBS:-$LIBSBASE}" - -# If a static library is available, the default will be to use it. If the only -# available library is shared, it will be used by default. The user can -# override either default, although choosing an unavailable library will result -# in link errors. -STATIC_AVAILABLE="@enable_static@" -if test "${STATIC_AVAILABLE}" = "yes"; then - USE_SHARED_LIB="${HDF5_USE_SHLIB:-no}" -else - USE_SHARED_LIB="${HDF5_USE_SHLIB:-yes}" -fi - - -usage() { - # A wonderfully informative "usage" message. - echo "usage: $prog_name [OPTIONS] <compile line>" - echo " OPTIONS:" - echo " -help This help message." - echo " -echo Show all the shell commands executed" - echo " -prefix=DIR Prefix directory to find HDF5 lib/ and include/" - echo " subdirectories [default: $prefix]" - # A wonderfully informative "usage" message. - echo "usage: $prog_name [OPTIONS] <compile line>" - echo " OPTIONS:" - echo " -help This help message." - echo " -echo Show all the shell commands executed" - echo " -prefix=DIR Prefix directory to find HDF5 lib/ and include/" - echo " subdirectories [default: $prefix]" - echo " -show Show the commands without executing them" - echo " -showconfig Show the HDF5 library configuration summary" - echo " -shlib Compile with shared HDF5 libraries [default for hdf5 built" - echo " without static libraries]" - echo " -noshlib Compile with static HDF5 libraries [default for hdf5 built" - echo " with static libraries]" - echo " " - echo " <compile line> - the normal compile line options for your compiler." - echo " $prog_name uses the same compiler you used to compile" - echo " HDF5. Check with your compiler's man pages for more" - echo " information on which options are needed." - echo " " - echo " You can override the compiler, linker, and whether or not to use static" - echo " or shared libraries to compile your program by setting the following" - echo " environment variables accordingly:" - echo " " - echo " HDF5_CC - use a different C compiler" - echo " HDF5_CLINKER - use a different linker" - echo " HDF5_USE_SHLIB=[yes|no] - use shared or static version of the HDF5 library" - echo " [default: no except when built with only" - echo " shared libraries]" - echo " " - echo " You can also add or change paths and flags to the compile line using" - echo " the following environment varibles or by assigning them to their counterparts" - echo " in the 'Things You Can Modify to Override...'" section of $prog_name - echo " " - echo " Variable Current value to be replaced" - echo " HDF5_CPPFLAGS \"$CPPFLAGSBASE\"" - echo " HDF5_CFLAGS \"$CFLAGSBASE\"" - echo " HDF5_LDFLAGS \"$LDFLAGSBASE\"" - echo " HDF5_LIBS \"$LIBSBASE\"" - echo " " - echo " Note that adding library paths to HDF5_LDFLAGS where another hdf5 version" - echo " is located may link your program with that other hdf5 library version." - echo " " - exit $EXIT_FAILURE -} - -# Show the configuration summary of the library recorded in the -# libhdf5.settings file reside in the lib directory. -showconfigure() -{ - cat ${libdir}/libhdf5.settings - status=$? -} - -# Main -status=$EXIT_SUCCESS - -if test "$#" = "0"; then - # No parameters specified, issue usage statement and exit. - usage -fi - -case "$CC" in - gcc) - kind="gcc" - ;; - mpicc|mpcc|mpicc_r) - # Is this gcc masquarading as an MPI compiler? - if test "`${CC} -v 2>&1 | sed -n 2p | cut -c1-3`" = "gcc"; then - kind="gcc" - else - # Nope - kind="$host_os" - fi - ;; - *) - kind="$host_os" - ;; -esac - -for arg in $@ ; do - if test "x$get_output_file" = "xyes"; then - link_args="$link_args $arg" - output_file="$arg" - get_output_file="no" - continue - fi - - case "$arg" in - -c) - allargs="$allargs $arg" - compile_args="$compile_args $arg" - - if test "x$do_link" = "xyes" -a -n "$output_file"; then - compile_args="$compile_args -o $output_file" - fi - - do_link="no" - dash_c="yes" - ;; - -o) - allargs="$allargs $arg" - dash_o="yes" - - if test "x$dash_c" = "xyes"; then - compile_args="$compile_args $arg" - else - link_args="$link_args $arg" - do_link="yes" - get_output_file="yes" - fi - ;; - -E|-M|-MT) - allargs="$allargs $arg" - compile_args="$compile_args $arg" - dash_c="yes" - do_link="no" - ;; - -l*) - libraries=" $libraries $arg " - allargs="$allargs $arg" - ;; - -prefix=*) - prefix="`expr "$arg" : '-prefix=\(.*\)'`" - ;; - -echo) - set -x - ;; - -show) - SHOW="echo" - ;; - -showconfig) - showconfigure - exit $status - ;; - -shlib) - USE_SHARED_LIB="yes" - ;; - -noshlib) - USE_SHARED_LIB="no" - ;; - -help) - usage - ;; - *\"*) - qarg="'"$arg"'" - allargs="$allargs $qarg" - ;; - *\'*) - qarg='\"'"$arg"'\"' - allargs="$allargs $qarg" - ;; - *) - allargs="$allargs $qarg" - - if test -s "$arg"; then - ext=`expr "$arg" : '.*\(\..*\)'` - - if test "x$ext" = "x.c"; then - do_compile="yes" - compile_args="$compile_args $arg" - fname=`basename $arg .c` - link_objs="$link_objs $fname.o" - elif test "x$ext" = "x.o"; then - if test "x$dash_c" = "xyes"; then - compile_args="$compile_args $arg" - else - do_link="yes" - link_objs="$link_objs $arg" - fi - elif test "x$ext" = "x.a"; then - # This is an archive that we're linking in - libraries=" $libraries $arg " - else - compile_args="$compile_args $arg" - link_args="$link_args $arg" - fi - else - compile_args="$compile_args $arg" - link_args="$link_args $arg" - fi - ;; - esac -done - -if test "$dash_c" = "yes" -a "$do_compile" = no -a "$do_link" = no ; then - # -c was specified. Force do_compile on. - do_compile=yes -fi - -if test "x$do_compile" = "xyes"; then - if test "x$dash_c" != "xyes"; then - compile_args="-c $compile_args" - fi - - $SHOW $CC -I$includedir $H5BLD_CPPFLAGS $CPPFLAGS $H5BLD_CFLAGS $CFLAGS $compile_args - status=$? - - if test "$status" != "0"; then - exit $status - fi -fi - -if test "x$do_link" = "xyes"; then - shared_link="" -# conditionnaly link with the hl library - if test "X$HL" = "Xhl"; then - libraries=" $libraries -lhdf5_hl -lhdf5 " - else - libraries=" $libraries -lhdf5 " - fi - link_args="$link_args -L${libdir}" - - case "$kind" in - gcc|linux*) - # MacOS X doesn't support the "-Wl,-rpath -Wl," style of linker flags. - # It appears to want none of them specified. - case "$host_os" in - darwin*) flag="" ;; - *) flag="-Wl,-rpath -Wl," ;; - esac - ;; - hpux*) flag="-Wl,+b -Wl," ;; - freebsd*|solaris*) flag="-R" ;; - rs6000*|aix*) flag="-L" ;; - sgi) flag="-rpath " ;; - *) flag="" ;; - esac - - if test -n "$flag"; then - shared_link="${flag}${libdir}" - fi - - if test "x$USE_SHARED_LIB" != "xyes"; then - # The "-lhdf5" & "-lhdf5_hl" flags are in here already...This is a static - # compile though, so change it to the static version (.a) of the library. - new_libraries="" - for lib in $libraries; do - case "$lib" in - -lhdf5) - new_libraries="$new_libraries ${libdir}/libhdf5.a" - ;; - -lhdf5_hl) - new_libraries="$new_libraries ${libdir}/libhdf5_hl.a" - ;; - *) - new_libraries="$new_libraries $lib" - ;; - esac - done - libraries="$new_libraries" - fi - - for lib in $libraries; do - if echo $link_args | grep " $lib " > /dev/null || - echo $link_args | grep " $lib$" > /dev/null; then - : - else - link_args="$link_args $lib " - fi - done - - # The LIBS are just a bunch of -l* libraries necessary for the HDF5 - # module. It's okay if they're included twice in the compile line. - link_args="$link_args $H5BLD_LDFLAGS $H5BLD_LIBS" - - # User's CPPFLAGS and CFLAGS come after their H5BLD counterparts. User's - # LDFLAGS come just before clibpath, user's LIBS come after $link_objs and - # before the hdf5 libraries in $link_args, followed by any external library - # paths and libraries from AM_LDFLAGS, LDFLAGS, AM_LIBS or LIBS carried in - # from the hdf5 build. The order of the flags is intended to give precedence - # to the user's flags. - $SHOW $CLINKER $H5BLD_CPPFLAGS $CPPFLAGS $H5BLD_CFLAGS $CFLAGS $LDFLAGS $clibpath $link_objs $LIBS $link_args $shared_link - status=$? -fi - -exit $status |