Merge pull request #1612 from dl5rcw/master

Introducing hamlib

2 files changed, 157 insertions, 0 deletions

diff --git a/src/hamlib-test.c b/src/hamlib-test.c
new file mode 100644
index 0000000..28c485c
--- /dev/null
+++ b/src/hamlib-test.c
@@ -0,0 +1,106 @@
+/*  This file is part of MXE. See LICENSE.md for licensing information.
+ *  This is a elementary program calling and testing Hamlib.
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <hamlib/rig.h>
+#include <hamlib/riglist.h>
+
+int main(int argc, char *argv[]) {
+	RIG *my_rig;
+	char *rig_file, *info_buf, *mm;
+	freq_t freq;
+	value_t rawstrength, power, strength;
+	float s_meter, rig_raw2val();
+	int status, retcode, isz;
+	unsigned int mwpower;
+	rmode_t mode;
+	pbwidth_t width;
+	rig_model_t myrig_model;
+	char portname[64]; 
+	port_t myport;
+
+	strncpy(portname, argv[2], 63);
+	portname[63] = '\0';
+
+	if ((strcmp(argv[2], "--help") == 0) || (argc < 2)) {
+		printf("use like: ./%s <portname>\n", argv[0]);
+		printf("example:  ./%s /dev/ttyS0\n", argv[0]);
+		return 0;
+	}
+	
+	/* Try to detect rig */
+	/* may be overriden by backend probe */
+	myport.type.rig = RIG_PORT_SERIAL;
+	myport.parm.serial.rate = 9600;
+	myport.parm.serial.data_bits = 8;
+	myport.parm.serial.stop_bits = 1;
+	myport.parm.serial.parity = RIG_PARITY_NONE;
+	myport.parm.serial.handshake = RIG_HANDSHAKE_NONE;
+	strncpy(myport.pathname, portname, FILPATHLEN);
+
+	rig_load_all_backends();
+	myrig_model = rig_probe(&myport);
+	/* Set verbosity level - errors only */
+	rig_set_debug(RIG_DEBUG_ERR);
+	/* Instantiate a rig - your rig */
+	/* my_rig = rig_init(RIG_MODEL_TT565); */
+	my_rig = rig_init(myrig_model); 
+	/* Set up serial port, baud rate - serial device + baudrate */
+	rig_file = "/dev/ttyUSB0";
+	strncpy(my_rig->state.rigport.pathname, rig_file, FILPATHLEN - 1);
+	my_rig->state.rigport.parm.serial.rate = 57600; 
+	my_rig->state.rigport.parm.serial.rate = 9600; 
+	/* Open my rig */
+	retcode = rig_open(my_rig);
+	printf("retcode of rig_open = %d \n", retcode);
+	/* Give me ID info, e.g., firmware version. */
+	info_buf = (char *)rig_get_info(my_rig);
+	printf("Rig_info: '%s'\n", info_buf);
+
+	/* Note: As a general practice, we should check to see if a given
+	 * function is within the rig's capabilities before calling it, but
+	 * we are simplifying here. Also, we should check each call's returned
+	 * status in case of error. (That's an inelegant way to catch an unsupported
+	 * operation.)
+	 */
+
+	/* Main VFO frequency */
+	status = rig_get_freq(my_rig, RIG_VFO_CURR, &freq);
+	printf("status of rig_get_freq = %d \n", status);
+	printf("VFO freq. = %.1f Hz\n", freq);
+	/* Current mode */
+	status = rig_get_mode(my_rig, RIG_VFO_CURR, &mode, &width);
+	printf("status of rig_get_mode = %d \n", status);
+	switch(mode) {
+		case RIG_MODE_USB: mm = "USB"; break;
+		case RIG_MODE_LSB: mm = "LSB"; break;
+		case RIG_MODE_CW:  mm = "CW"; break;
+		case RIG_MODE_CWR: mm = "CWR"; break;
+		case RIG_MODE_AM:  mm = "AM"; break;
+		case RIG_MODE_FM:  mm = "FM"; break;
+		case RIG_MODE_WFM: mm = "WFM"; break;
+		case RIG_MODE_RTTY:mm = "RTTY"; break;
+		default: mm = "unrecognized"; break; /* there are more possibilities! */
+		}
+	printf("Current mode = 0x%X = %s, width = %d\n", mode, mm, (int) width);
+	/* rig power output */
+	status = rig_get_level(my_rig, RIG_VFO_CURR, RIG_LEVEL_RFPOWER, &power);
+	printf("RF Power relative setting = %.3f (0.0 - 1.0)\n", power.f);
+	/* Convert power reading to watts */
+	status = rig_power2mW(my_rig, &mwpower, power.f, freq, mode);
+	printf("RF Power calibrated = %.1f Watts\n", mwpower/1000.);
+	/* Raw and calibrated S-meter values */
+	status = rig_get_level(my_rig, RIG_VFO_CURR, RIG_LEVEL_RAWSTR, &rawstrength);
+	printf("Raw receive strength = %d\n", rawstrength.i);
+	isz = my_rig->caps->str_cal.size;
+	printf("isz = %d \n", isz);
+	s_meter = rig_raw2val(rawstrength.i, &my_rig->caps->str_cal);
+	printf("S-meter value = %.2f dB relative to S9\n", s_meter);
+	/* now try using RIG_LEVEL_STRENGTH itself */
+	status = rig_get_strength(my_rig, RIG_VFO_CURR, &strength);
+	printf("status of rig_get_strength = %d \n", status);
+	printf("LEVEL_STRENGTH returns %d\n", strength.i);
+return 0;
+}
diff --git a/src/hamlib.mk b/src/hamlib.mk
new file mode 100644
index 0000000..821831b
--- /dev/null
+++ b/src/hamlib.mk
@@ -0,0 +1,51 @@
+# This file is part of MXE. See LICENSE.md for licensing information.
+# visit http://hamlib.org or https://github.com/N0NB/hamlib
+# 2016-12-24 Lars Holger Engelhard DL5RCW
+
+PKG             := hamlib
+$(PKG)_WEBSITE  := http://www.hamlib.org
+$(PKG)_DESCR    := HamLib
+$(PKG)_IGNORE   :=
+$(PKG)_VERSION  := 3.0.1
+$(PKG)_CHECKSUM := 3fec97ea326d02aa8f35834c4af34194a3f544e6212f391397d788c566b44e32
+$(PKG)_SUBDIR   := hamlib-$($(PKG)_VERSION)
+$(PKG)_FILE     := Hamlib-$($(PKG)_VERSION).tar.gz
+$(PKG)_URL      := http://$(SOURCEFORGE_MIRROR)/project/hamlib/hamlib/$($(PKG)_VERSION)/hamlib-$($(PKG)_VERSION).tar.gz
+$(PKG)_URL_2    := https://github.com/N0NB/$(PKG)/archive/$($(PKG)_VERSION).tar.gz
+$(PKG)_DEPS     := gcc libltdl libusb1 libxml2 pthreads
+
+# grabbing version from sourceforge
+# prefered by Nate N0NB
+define $(PKG)_UPDATE
+    $(WGET) -q -O- 'http://sourceforge.net/projects/hamlib/files/hamlib/' | \
+    $(SED) -n 's,.*/\([0-9][^"]*\)/".*,\1,p' | \
+    head -1
+endef
+
+## grabbing version from github via MXE
+#define $(PKG)_UPDATE
+#    $(call MXE_GET_GITHUB_TAGS, N0NB/hamlib)
+#endef
+
+define $(PKG)_BUILD
+    cd '$(BUILD_DIR)' && '$(SOURCE_DIR)/configure' \
+        $(MXE_CONFIGURE_OPTS) \
+        --with-included-ltdl \
+        --disable-winradio
+    $(MAKE) -C '$(BUILD_DIR)' -j '$(JOBS)' || $(MAKE) -C '$(BUILD_DIR)' -j 1
+    $(MAKE) -C '$(BUILD_DIR)' -j 1 install $(MXE_DISABLE_CRUFT)
+
+    # create pkg-config files
+    $(INSTALL) -d '$(PREFIX)/$(TARGET)/lib/pkgconfig'
+    (echo 'Name: $(PKG)'; \
+     echo 'Version: $(hamlib_VERSION)'; \
+     echo 'Description: $(PKG)'; \
+     echo 'Cflags: -DHAMLIB_LIB'; \
+     echo 'Libs: -lhamlib -lpthread -lws2_32';) \
+     > '$(PREFIX)/$(TARGET)/lib/pkgconfig/$(PKG).pc'
+
+    '$(TARGET)-gcc' \
+        -W -Wall -Werror -ansi -pedantic \
+        '$(PWD)/src/$(PKG)-test.c' -o '$(PREFIX)/$(TARGET)/bin/test-$(PKG).exe' \
+        `'$(TARGET)-pkg-config' --cflags --libs hamlib pthreads`
+endef