summaryrefslogtreecommitdiffstats
path: root/src/hamlib-test.c
diff options
context:
space:
mode:
Diffstat (limited to 'src/hamlib-test.c')
-rw-r--r--src/hamlib-test.c176
1 files changed, 88 insertions, 88 deletions
diff --git a/src/hamlib-test.c b/src/hamlib-test.c
index ee382f7..98c5fa4 100644
--- a/src/hamlib-test.c
+++ b/src/hamlib-test.c
@@ -8,99 +8,99 @@
#include <hamlib/riglist.h>
int main(int argc, char *argv[]) {
- RIG *my_rig;
- char *rig_file, *info_buf, *mm;
- freq_t freq;
- value_t rawstrength, power, strength;
- float s_meter, rig_raw2val();
- int status, retcode, isz;
- unsigned int mwpower;
- rmode_t mode;
- pbwidth_t width;
- rig_model_t myrig_model;
- char portname[64];
- port_t myport;
+ RIG *my_rig;
+ char *rig_file, *info_buf, *mm;
+ freq_t freq;
+ value_t rawstrength, power, strength;
+ float s_meter, rig_raw2val();
+ int status, retcode, isz;
+ unsigned int mwpower;
+ rmode_t mode;
+ pbwidth_t width;
+ rig_model_t myrig_model;
+ char portname[64];
+ port_t myport;
- strncpy(portname, argv[2], 63);
- portname[63] = '\0';
+ strncpy(portname, argv[2], 63);
+ portname[63] = '\0';
- if ((strcmp(argv[2], "--help") == 0) || (argc < 2)) {
- printf("use like: ./%s <portname>\n", argv[0]);
- printf("example: ./%s /dev/ttyS0\n", argv[0]);
- return 0;
- }
+ if ((strcmp(argv[2], "--help") == 0) || (argc < 2)) {
+ printf("use like: ./%s <portname>\n", argv[0]);
+ printf("example: ./%s /dev/ttyS0\n", argv[0]);
+ return 0;
+ }
- /* Try to detect rig */
- /* may be overridden by backend probe */
- myport.type.rig = RIG_PORT_SERIAL;
- myport.parm.serial.rate = 9600;
- myport.parm.serial.data_bits = 8;
- myport.parm.serial.stop_bits = 1;
- myport.parm.serial.parity = RIG_PARITY_NONE;
- myport.parm.serial.handshake = RIG_HANDSHAKE_NONE;
- strncpy(myport.pathname, portname, FILPATHLEN);
+ /* Try to detect rig */
+ /* may be overridden by backend probe */
+ myport.type.rig = RIG_PORT_SERIAL;
+ myport.parm.serial.rate = 9600;
+ myport.parm.serial.data_bits = 8;
+ myport.parm.serial.stop_bits = 1;
+ myport.parm.serial.parity = RIG_PARITY_NONE;
+ myport.parm.serial.handshake = RIG_HANDSHAKE_NONE;
+ strncpy(myport.pathname, portname, FILPATHLEN);
- rig_load_all_backends();
- myrig_model = rig_probe(&myport);
- /* Set verbosity level - errors only */
- rig_set_debug(RIG_DEBUG_ERR);
- /* Instantiate a rig - your rig */
- /* my_rig = rig_init(RIG_MODEL_TT565); */
- my_rig = rig_init(myrig_model);
- /* Set up serial port, baud rate - serial device + baudrate */
- rig_file = "/dev/ttyUSB0";
- strncpy(my_rig->state.rigport.pathname, rig_file, FILPATHLEN - 1);
- my_rig->state.rigport.parm.serial.rate = 57600;
- my_rig->state.rigport.parm.serial.rate = 9600;
- /* Open my rig */
- retcode = rig_open(my_rig);
- printf("retcode of rig_open = %d \n", retcode);
- /* Give me ID info, e.g., firmware version. */
- info_buf = (char *)rig_get_info(my_rig);
- printf("Rig_info: '%s'\n", info_buf);
+ rig_load_all_backends();
+ myrig_model = rig_probe(&myport);
+ /* Set verbosity level - errors only */
+ rig_set_debug(RIG_DEBUG_ERR);
+ /* Instantiate a rig - your rig */
+ /* my_rig = rig_init(RIG_MODEL_TT565); */
+ my_rig = rig_init(myrig_model);
+ /* Set up serial port, baud rate - serial device + baudrate */
+ rig_file = "/dev/ttyUSB0";
+ strncpy(my_rig->state.rigport.pathname, rig_file, FILPATHLEN - 1);
+ my_rig->state.rigport.parm.serial.rate = 57600;
+ my_rig->state.rigport.parm.serial.rate = 9600;
+ /* Open my rig */
+ retcode = rig_open(my_rig);
+ printf("retcode of rig_open = %d \n", retcode);
+ /* Give me ID info, e.g., firmware version. */
+ info_buf = (char *)rig_get_info(my_rig);
+ printf("Rig_info: '%s'\n", info_buf);
- /* Note: As a general practice, we should check to see if a given
- * function is within the rig's capabilities before calling it, but
- * we are simplifying here. Also, we should check each call's returned
- * status in case of error. (That's an inelegant way to catch an unsupported
- * operation.)
- */
+ /* Note: As a general practice, we should check to see if a given
+ * function is within the rig's capabilities before calling it, but
+ * we are simplifying here. Also, we should check each call's returned
+ * status in case of error. (That's an inelegant way to catch an unsupported
+ * operation.)
+ */
- /* Main VFO frequency */
- status = rig_get_freq(my_rig, RIG_VFO_CURR, &freq);
- printf("status of rig_get_freq = %d \n", status);
- printf("VFO freq. = %.1f Hz\n", freq);
- /* Current mode */
- status = rig_get_mode(my_rig, RIG_VFO_CURR, &mode, &width);
- printf("status of rig_get_mode = %d \n", status);
- switch(mode) {
- case RIG_MODE_USB: mm = "USB"; break;
- case RIG_MODE_LSB: mm = "LSB"; break;
- case RIG_MODE_CW: mm = "CW"; break;
- case RIG_MODE_CWR: mm = "CWR"; break;
- case RIG_MODE_AM: mm = "AM"; break;
- case RIG_MODE_FM: mm = "FM"; break;
- case RIG_MODE_WFM: mm = "WFM"; break;
- case RIG_MODE_RTTY:mm = "RTTY"; break;
- default: mm = "unrecognized"; break; /* there are more possibilities! */
- }
- printf("Current mode = 0x%X = %s, width = %d\n", mode, mm, (int) width);
- /* rig power output */
- status = rig_get_level(my_rig, RIG_VFO_CURR, RIG_LEVEL_RFPOWER, &power);
- printf("RF Power relative setting = %.3f (0.0 - 1.0)\n", power.f);
- /* Convert power reading to watts */
- status = rig_power2mW(my_rig, &mwpower, power.f, freq, mode);
- printf("RF Power calibrated = %.1f Watts\n", mwpower/1000.);
- /* Raw and calibrated S-meter values */
- status = rig_get_level(my_rig, RIG_VFO_CURR, RIG_LEVEL_RAWSTR, &rawstrength);
- printf("Raw receive strength = %d\n", rawstrength.i);
- isz = my_rig->caps->str_cal.size;
- printf("isz = %d \n", isz);
- s_meter = rig_raw2val(rawstrength.i, &my_rig->caps->str_cal);
- printf("S-meter value = %.2f dB relative to S9\n", s_meter);
- /* now try using RIG_LEVEL_STRENGTH itself */
- status = rig_get_strength(my_rig, RIG_VFO_CURR, &strength);
- printf("status of rig_get_strength = %d \n", status);
- printf("LEVEL_STRENGTH returns %d\n", strength.i);
+ /* Main VFO frequency */
+ status = rig_get_freq(my_rig, RIG_VFO_CURR, &freq);
+ printf("status of rig_get_freq = %d \n", status);
+ printf("VFO freq. = %.1f Hz\n", freq);
+ /* Current mode */
+ status = rig_get_mode(my_rig, RIG_VFO_CURR, &mode, &width);
+ printf("status of rig_get_mode = %d \n", status);
+ switch(mode) {
+ case RIG_MODE_USB: mm = "USB"; break;
+ case RIG_MODE_LSB: mm = "LSB"; break;
+ case RIG_MODE_CW: mm = "CW"; break;
+ case RIG_MODE_CWR: mm = "CWR"; break;
+ case RIG_MODE_AM: mm = "AM"; break;
+ case RIG_MODE_FM: mm = "FM"; break;
+ case RIG_MODE_WFM: mm = "WFM"; break;
+ case RIG_MODE_RTTY:mm = "RTTY"; break;
+ default: mm = "unrecognized"; break; /* there are more possibilities! */
+ }
+ printf("Current mode = 0x%X = %s, width = %d\n", mode, mm, (int) width);
+ /* rig power output */
+ status = rig_get_level(my_rig, RIG_VFO_CURR, RIG_LEVEL_RFPOWER, &power);
+ printf("RF Power relative setting = %.3f (0.0 - 1.0)\n", power.f);
+ /* Convert power reading to watts */
+ status = rig_power2mW(my_rig, &mwpower, power.f, freq, mode);
+ printf("RF Power calibrated = %.1f Watts\n", mwpower/1000.);
+ /* Raw and calibrated S-meter values */
+ status = rig_get_level(my_rig, RIG_VFO_CURR, RIG_LEVEL_RAWSTR, &rawstrength);
+ printf("Raw receive strength = %d\n", rawstrength.i);
+ isz = my_rig->caps->str_cal.size;
+ printf("isz = %d \n", isz);
+ s_meter = rig_raw2val(rawstrength.i, &my_rig->caps->str_cal);
+ printf("S-meter value = %.2f dB relative to S9\n", s_meter);
+ /* now try using RIG_LEVEL_STRENGTH itself */
+ status = rig_get_strength(my_rig, RIG_VFO_CURR, &strength);
+ printf("status of rig_get_strength = %d \n", status);
+ printf("LEVEL_STRENGTH returns %d\n", strength.i);
return 0;
}
generated by cgit v0.12 at 2025-08-31 22:49:48 (GMT)