Created branch dgp-refactor-merge-syntheticdgp_refactor_mergedgp_refactor_merge_synthetic

14 files changed, 4585 insertions, 0 deletions

diff --git a/compat/zlib/algorithm.txt b/compat/zlib/algorithm.txt
new file mode 100644
index 0000000..b022dde
--- /dev/null
+++ b/compat/zlib/algorithm.txt
@@ -0,0 +1,209 @@
+1. Compression algorithm (deflate)
+
+The deflation algorithm used by gzip (also zip and zlib) is a variation of
+LZ77 (Lempel-Ziv 1977, see reference below). It finds duplicated strings in
+the input data.  The second occurrence of a string is replaced by a
+pointer to the previous string, in the form of a pair (distance,
+length).  Distances are limited to 32K bytes, and lengths are limited
+to 258 bytes. When a string does not occur anywhere in the previous
+32K bytes, it is emitted as a sequence of literal bytes.  (In this
+description, `string' must be taken as an arbitrary sequence of bytes,
+and is not restricted to printable characters.)
+
+Literals or match lengths are compressed with one Huffman tree, and
+match distances are compressed with another tree. The trees are stored
+in a compact form at the start of each block. The blocks can have any
+size (except that the compressed data for one block must fit in
+available memory). A block is terminated when deflate() determines that
+it would be useful to start another block with fresh trees. (This is
+somewhat similar to the behavior of LZW-based _compress_.)
+
+Duplicated strings are found using a hash table. All input strings of
+length 3 are inserted in the hash table. A hash index is computed for
+the next 3 bytes. If the hash chain for this index is not empty, all
+strings in the chain are compared with the current input string, and
+the longest match is selected.
+
+The hash chains are searched starting with the most recent strings, to
+favor small distances and thus take advantage of the Huffman encoding.
+The hash chains are singly linked. There are no deletions from the
+hash chains, the algorithm simply discards matches that are too old.
+
+To avoid a worst-case situation, very long hash chains are arbitrarily
+truncated at a certain length, determined by a runtime option (level
+parameter of deflateInit). So deflate() does not always find the longest
+possible match but generally finds a match which is long enough.
+
+deflate() also defers the selection of matches with a lazy evaluation
+mechanism. After a match of length N has been found, deflate() searches for
+a longer match at the next input byte. If a longer match is found, the
+previous match is truncated to a length of one (thus producing a single
+literal byte) and the process of lazy evaluation begins again. Otherwise,
+the original match is kept, and the next match search is attempted only N
+steps later.
+
+The lazy match evaluation is also subject to a runtime parameter. If
+the current match is long enough, deflate() reduces the search for a longer
+match, thus speeding up the whole process. If compression ratio is more
+important than speed, deflate() attempts a complete second search even if
+the first match is already long enough.
+
+The lazy match evaluation is not performed for the fastest compression
+modes (level parameter 1 to 3). For these fast modes, new strings
+are inserted in the hash table only when no match was found, or
+when the match is not too long. This degrades the compression ratio
+but saves time since there are both fewer insertions and fewer searches.
+
+
+2. Decompression algorithm (inflate)
+
+2.1 Introduction
+
+The key question is how to represent a Huffman code (or any prefix code) so
+that you can decode fast.  The most important characteristic is that shorter
+codes are much more common than longer codes, so pay attention to decoding the
+short codes fast, and let the long codes take longer to decode.
+
+inflate() sets up a first level table that covers some number of bits of
+input less than the length of longest code.  It gets that many bits from the
+stream, and looks it up in the table.  The table will tell if the next
+code is that many bits or less and how many, and if it is, it will tell
+the value, else it will point to the next level table for which inflate()
+grabs more bits and tries to decode a longer code.
+
+How many bits to make the first lookup is a tradeoff between the time it
+takes to decode and the time it takes to build the table.  If building the
+table took no time (and if you had infinite memory), then there would only
+be a first level table to cover all the way to the longest code.  However,
+building the table ends up taking a lot longer for more bits since short
+codes are replicated many times in such a table.  What inflate() does is
+simply to make the number of bits in the first table a variable, and  then
+to set that variable for the maximum speed.
+
+For inflate, which has 286 possible codes for the literal/length tree, the size
+of the first table is nine bits.  Also the distance trees have 30 possible
+values, and the size of the first table is six bits.  Note that for each of
+those cases, the table ended up one bit longer than the ``average'' code
+length, i.e. the code length of an approximately flat code which would be a
+little more than eight bits for 286 symbols and a little less than five bits
+for 30 symbols.
+
+
+2.2 More details on the inflate table lookup
+
+Ok, you want to know what this cleverly obfuscated inflate tree actually
+looks like.  You are correct that it's not a Huffman tree.  It is simply a
+lookup table for the first, let's say, nine bits of a Huffman symbol.  The
+symbol could be as short as one bit or as long as 15 bits.  If a particular
+symbol is shorter than nine bits, then that symbol's translation is duplicated
+in all those entries that start with that symbol's bits.  For example, if the
+symbol is four bits, then it's duplicated 32 times in a nine-bit table.  If a
+symbol is nine bits long, it appears in the table once.
+
+If the symbol is longer than nine bits, then that entry in the table points
+to another similar table for the remaining bits.  Again, there are duplicated
+entries as needed.  The idea is that most of the time the symbol will be short
+and there will only be one table look up.  (That's whole idea behind data
+compression in the first place.)  For the less frequent long symbols, there
+will be two lookups.  If you had a compression method with really long
+symbols, you could have as many levels of lookups as is efficient.  For
+inflate, two is enough.
+
+So a table entry either points to another table (in which case nine bits in
+the above example are gobbled), or it contains the translation for the symbol
+and the number of bits to gobble.  Then you start again with the next
+ungobbled bit.
+
+You may wonder: why not just have one lookup table for how ever many bits the
+longest symbol is?  The reason is that if you do that, you end up spending
+more time filling in duplicate symbol entries than you do actually decoding.
+At least for deflate's output that generates new trees every several 10's of
+kbytes.  You can imagine that filling in a 2^15 entry table for a 15-bit code
+would take too long if you're only decoding several thousand symbols.  At the
+other extreme, you could make a new table for every bit in the code.  In fact,
+that's essentially a Huffman tree.  But then you spend two much time
+traversing the tree while decoding, even for short symbols.
+
+So the number of bits for the first lookup table is a trade of the time to
+fill out the table vs. the time spent looking at the second level and above of
+the table.
+
+Here is an example, scaled down:
+
+The code being decoded, with 10 symbols, from 1 to 6 bits long:
+
+A: 0
+B: 10
+C: 1100
+D: 11010
+E: 11011
+F: 11100
+G: 11101
+H: 11110
+I: 111110
+J: 111111
+
+Let's make the first table three bits long (eight entries):
+
+000: A,1
+001: A,1
+010: A,1
+011: A,1
+100: B,2
+101: B,2
+110: -> table X (gobble 3 bits)
+111: -> table Y (gobble 3 bits)
+
+Each entry is what the bits decode as and how many bits that is, i.e. how
+many bits to gobble.  Or the entry points to another table, with the number of
+bits to gobble implicit in the size of the table.
+
+Table X is two bits long since the longest code starting with 110 is five bits
+long:
+
+00: C,1
+01: C,1
+10: D,2
+11: E,2
+
+Table Y is three bits long since the longest code starting with 111 is six
+bits long:
+
+000: F,2
+001: F,2
+010: G,2
+011: G,2
+100: H,2
+101: H,2
+110: I,3
+111: J,3
+
+So what we have here are three tables with a total of 20 entries that had to
+be constructed.  That's compared to 64 entries for a single table.  Or
+compared to 16 entries for a Huffman tree (six two entry tables and one four
+entry table).  Assuming that the code ideally represents the probability of
+the symbols, it takes on the average 1.25 lookups per symbol.  That's compared
+to one lookup for the single table, or 1.66 lookups per symbol for the
+Huffman tree.
+
+There, I think that gives you a picture of what's going on.  For inflate, the
+meaning of a particular symbol is often more than just a letter.  It can be a
+byte (a "literal"), or it can be either a length or a distance which
+indicates a base value and a number of bits to fetch after the code that is
+added to the base value.  Or it might be the special end-of-block code.  The
+data structures created in inftrees.c try to encode all that information
+compactly in the tables.
+
+
+Jean-loup Gailly        Mark Adler
+jloup@gzip.org          madler@alumni.caltech.edu
+
+
+References:
+
+[LZ77] Ziv J., Lempel A., ``A Universal Algorithm for Sequential Data
+Compression,'' IEEE Transactions on Information Theory, Vol. 23, No. 3,
+pp. 337-343.
+
+``DEFLATE Compressed Data Format Specification'' available in
+http://www.ietf.org/rfc/rfc1951.txt
diff --git a/compat/zlib/as400/bndsrc b/compat/zlib/as400/bndsrc
new file mode 100644
index 0000000..9cf94bb
--- /dev/null
+++ b/compat/zlib/as400/bndsrc
@@ -0,0 +1,132 @@
+STRPGMEXP PGMLVL(*CURRENT) SIGNATURE('ZLIB')
+
+/*@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@*/
+/*   Version 1.1.3 entry points.                                    */
+/*@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@*/
+
+/********************************************************************/
+/*   *MODULE      ADLER32      ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("adler32")
+
+/********************************************************************/
+/*   *MODULE      COMPRESS     ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("compress")
+  EXPORT SYMBOL("compress2")
+
+/********************************************************************/
+/*   *MODULE      CRC32        ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("crc32")
+  EXPORT SYMBOL("get_crc_table")
+
+/********************************************************************/
+/*   *MODULE      DEFLATE      ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("deflate")
+  EXPORT SYMBOL("deflateEnd")
+  EXPORT SYMBOL("deflateSetDictionary")
+  EXPORT SYMBOL("deflateCopy")
+  EXPORT SYMBOL("deflateReset")
+  EXPORT SYMBOL("deflateParams")
+  EXPORT SYMBOL("deflatePrime")
+  EXPORT SYMBOL("deflateInit_")
+  EXPORT SYMBOL("deflateInit2_")
+
+/********************************************************************/
+/*   *MODULE      GZIO         ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("gzopen")
+  EXPORT SYMBOL("gzdopen")
+  EXPORT SYMBOL("gzsetparams")
+  EXPORT SYMBOL("gzread")
+  EXPORT SYMBOL("gzwrite")
+  EXPORT SYMBOL("gzprintf")
+  EXPORT SYMBOL("gzputs")
+  EXPORT SYMBOL("gzgets")
+  EXPORT SYMBOL("gzputc")
+  EXPORT SYMBOL("gzgetc")
+  EXPORT SYMBOL("gzflush")
+  EXPORT SYMBOL("gzseek")
+  EXPORT SYMBOL("gzrewind")
+  EXPORT SYMBOL("gztell")
+  EXPORT SYMBOL("gzeof")
+  EXPORT SYMBOL("gzclose")
+  EXPORT SYMBOL("gzerror")
+
+/********************************************************************/
+/*   *MODULE      INFLATE      ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("inflate")
+  EXPORT SYMBOL("inflateEnd")
+  EXPORT SYMBOL("inflateSetDictionary")
+  EXPORT SYMBOL("inflateSync")
+  EXPORT SYMBOL("inflateReset")
+  EXPORT SYMBOL("inflateInit_")
+  EXPORT SYMBOL("inflateInit2_")
+  EXPORT SYMBOL("inflateSyncPoint")
+
+/********************************************************************/
+/*   *MODULE      UNCOMPR      ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("uncompress")
+
+/********************************************************************/
+/*   *MODULE      ZUTIL        ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("zlibVersion")
+  EXPORT SYMBOL("zError")
+
+/*@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@*/
+/*   Version 1.2.1 additional entry points.                         */
+/*@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@*/
+
+/********************************************************************/
+/*   *MODULE      COMPRESS     ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("compressBound")
+
+/********************************************************************/
+/*   *MODULE      DEFLATE      ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("deflateBound")
+
+/********************************************************************/
+/*   *MODULE      GZIO         ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("gzungetc")
+  EXPORT SYMBOL("gzclearerr")
+
+/********************************************************************/
+/*   *MODULE      INFBACK      ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("inflateBack")
+  EXPORT SYMBOL("inflateBackEnd")
+  EXPORT SYMBOL("inflateBackInit_")
+
+/********************************************************************/
+/*   *MODULE      INFLATE      ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("inflateCopy")
+
+/********************************************************************/
+/*   *MODULE      ZUTIL        ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("zlibCompileFlags")
+
+ENDPGMEXP
diff --git a/compat/zlib/as400/compile.clp b/compat/zlib/as400/compile.clp
new file mode 100644
index 0000000..8554951
--- /dev/null
+++ b/compat/zlib/as400/compile.clp
@@ -0,0 +1,123 @@
+/******************************************************************************/
+/*                                                                            */
+/*  ZLIB                                                                      */
+/*                                                                            */
+/*    Compile sources into modules and link them into a service program.      */
+/*                                                                            */
+/******************************************************************************/
+
+             PGM
+
+/*      Configuration adjustable parameters.                                  */
+
+             DCL        VAR(&SRCLIB) TYPE(*CHAR) LEN(10) +
+                          VALUE('ZLIB')                         /* Source library. */
+             DCL        VAR(&SRCFILE) TYPE(*CHAR) LEN(10) +
+                          VALUE('SOURCES')                      /* Source member file. */
+             DCL        VAR(&CTLFILE) TYPE(*CHAR) LEN(10) +
+                          VALUE('TOOLS')                        /* Control member file. */
+
+             DCL        VAR(&MODLIB) TYPE(*CHAR) LEN(10) +
+                          VALUE('ZLIB')                         /* Module library. */
+
+             DCL        VAR(&SRVLIB) TYPE(*CHAR) LEN(10) +
+                          VALUE('LGPL')                         /* Service program library. */
+
+             DCL        VAR(&CFLAGS) TYPE(*CHAR) +
+                          VALUE('OPTIMIZE(40)')                 /* Compile options. */
+
+
+/*      Working storage.                                                      */
+
+             DCL        VAR(&CMDLEN) TYPE(*DEC) LEN(15 5) VALUE(300)    /* Command length. */
+             DCL        VAR(&CMD) TYPE(*CHAR) LEN(512)
+
+
+/*      Compile sources into modules.                                         */
+
+             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
+                        '/ADLER32)               SRCFILE(' *TCAT               +
+                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
+                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
+                        '/COMPRESS)              SRCFILE(' *TCAT               +
+                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
+                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
+                        '/CRC32)                 SRCFILE(' *TCAT               +
+                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
+                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
+                        '/DEFLATE)               SRCFILE(' *TCAT               +
+                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
+                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
+                        '/GZIO)                  SRCFILE(' *TCAT               +
+                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
+                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
+                        '/INFBACK)               SRCFILE(' *TCAT               +
+                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
+                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
+                        '/INFFAST)               SRCFILE(' *TCAT               +
+                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
+                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
+                        '/INFLATE)               SRCFILE(' *TCAT               +
+                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
+                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
+                        '/INFTREES)              SRCFILE(' *TCAT               +
+                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
+                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
+                        '/TREES)                 SRCFILE(' *TCAT               +
+                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
+                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
+                        '/UNCOMPR)               SRCFILE(' *TCAT               +
+                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
+                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
+                        '/ZUTIL)                 SRCFILE(' *TCAT               +
+                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
+                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+
+/*      Link modules into a service program.                                  */
+
+             CRTSRVPGM  SRVPGM(&SRVLIB/ZLIB) +
+                          MODULE(&MODLIB/ADLER32     &MODLIB/COMPRESS    +
+                                 &MODLIB/CRC32       &MODLIB/DEFLATE     +
+                                 &MODLIB/GZIO        &MODLIB/INFBACK     +
+                                 &MODLIB/INFFAST     &MODLIB/INFLATE     +
+                                 &MODLIB/INFTREES    &MODLIB/TREES       +
+                                 &MODLIB/UNCOMPR     &MODLIB/ZUTIL)      +
+                          SRCFILE(&SRCLIB/&CTLFILE) SRCMBR(BNDSRC) +
+                          TEXT('ZLIB 1.2.3') TGTRLS(V4R4M0)
+
+             ENDPGM
diff --git a/compat/zlib/as400/readme.txt b/compat/zlib/as400/readme.txt
new file mode 100644
index 0000000..beae13f
--- /dev/null
+++ b/compat/zlib/as400/readme.txt
@@ -0,0 +1,111 @@
+        ZLIB version 1.2.3 for AS400 installation instructions
+
+I) From an AS400 *SAVF file:
+
+1)      Unpacking archive to an AS400 save file
+
+On the AS400:
+
+_       Create the ZLIB AS400 library:
+
+        CRTLIB LIB(ZLIB) TYPE(PROD) TEXT('ZLIB compression API library')
+
+_       Create a work save file, for example:
+
+                CRTSAVF FILE(ZLIB/ZLIBSAVF)
+
+On a PC connected to the target AS400:
+
+_       Unpack the save file image to a PC file "ZLIBSAVF"
+_       Upload this file into the save file on the AS400, for example
+                using ftp in BINARY mode.
+
+
+2)      Populating the ZLIB AS400 source library
+
+On the AS400:
+
+_       Extract the saved objects into the ZLIB AS400 library using:
+
+RSTOBJ OBJ(*ALL) SAVLIB(ZLIB) DEV(*SAVF) SAVF(ZLIB/ZLIBSAVF) RSTLIB(ZLIB)
+
+
+3)      Customize installation:
+
+_       Edit CL member ZLIB/TOOLS(COMPILE) and change parameters if needed,
+                according to the comments.
+
+_       Compile this member with:
+
+        CRTCLPGM PGM(ZLIB/COMPILE) SRCFILE(ZLIB/TOOLS) SRCMBR(COMPILE)
+
+
+4)      Compile and generate the service program:
+
+_       This can now be done by executing:
+
+        CALL PGM(ZLIB/COMPILE)
+
+
+
+II) From the original source distribution:
+
+1)      On the AS400, create the source library:
+
+        CRTLIB LIB(ZLIB) TYPE(PROD) TEXT('ZLIB compression API library')
+
+2)      Create the source files:
+
+        CRTSRCPF FILE(ZLIB/SOURCES) RCDLEN(112) TEXT('ZLIB library modules')
+        CRTSRCPF FILE(ZLIB/H)       RCDLEN(112) TEXT('ZLIB library includes')
+        CRTSRCPF FILE(ZLIB/TOOLS)   RCDLEN(112) TEXT('ZLIB library control utilities')
+
+3)      From the machine hosting the distribution files, upload them (with
+                FTP in text mode, for example) according to the following table:
+
+    Original    AS400   AS400    AS400 AS400
+    file        file    member   type  description
+                SOURCES                Original ZLIB C subprogram sources
+    adler32.c           ADLER32  C     ZLIB - Compute the Adler-32 checksum of a dta strm
+    compress.c          COMPRESS C     ZLIB - Compress a memory buffer
+    crc32.c             CRC32    C     ZLIB - Compute the CRC-32 of a data stream
+    deflate.c           DEFLATE  C     ZLIB - Compress data using the deflation algorithm
+    gzio.c              GZIO     C     ZLIB - IO on .gz files
+    infback.c           INFBACK  C     ZLIB - Inflate using a callback interface
+    inffast.c           INFFAST  C     ZLIB - Fast proc. literals & length/distance pairs
+    inflate.c           INFLATE  C     ZLIB - Interface to inflate modules
+    inftrees.c          INFTREES C     ZLIB - Generate Huffman trees for efficient decode
+    trees.c             TREES    C     ZLIB - Output deflated data using Huffman coding
+    uncompr.c           UNCOMPR  C     ZLIB - Decompress a memory buffer
+    zutil.c             ZUTIL    C     ZLIB - Target dependent utility functions
+                H                      Original ZLIB C and ILE/RPG include files
+    crc32.h             CRC32    C     ZLIB - CRC32 tables
+    deflate.h           DEFLATE  C     ZLIB - Internal compression state
+    inffast.h           INFFAST  C     ZLIB - Header to use inffast.c
+    inffixed.h          INFFIXED C     ZLIB - Table for decoding fixed codes
+    inflate.h           INFLATE  C     ZLIB - Internal inflate state definitions
+    inftrees.h          INFTREES C     ZLIB - Header to use inftrees.c
+    trees.h             TREES    C     ZLIB - Created automatically with -DGEN_TREES_H
+    zconf.h             ZCONF    C     ZLIB - Compression library configuration
+    zlib.h              ZLIB     C     ZLIB - Compression library C user interface
+    as400/zlib.inc      ZLIB.INC RPGLE ZLIB - Compression library ILE RPG user interface
+    zutil.h             ZUTIL    C     ZLIB - Internal interface and configuration
+                TOOLS                  Building source software & AS/400 README
+    as400/bndsrc        BNDSRC         Entry point exportation list
+    as400/compile.clp   COMPILE  CLP   Compile sources & generate service program
+    as400/readme.txt    README   TXT   Installation instructions
+
+4)      Continue as in I)3).
+
+
+
+
+Notes:  For AS400 ILE RPG programmers, a /copy member defining the ZLIB
+                API prototypes for ILE RPG can be found in ZLIB/H(ZLIB.INC).
+                Please read comments in this member for more information.
+
+        Remember that most foreign textual data are ASCII coded: this
+                implementation does not handle conversion from/to ASCII, so
+                text data code conversions must be done explicitely.
+
+        Always open zipped files in binary mode.
diff --git a/compat/zlib/as400/zlib.inc b/compat/zlib/as400/zlib.inc
new file mode 100644
index 0000000..7bbfb7e
--- /dev/null
+++ b/compat/zlib/as400/zlib.inc
@@ -0,0 +1,331 @@
+      *  ZLIB.INC - Interface to the general purpose compression library
+      *
+      *  ILE RPG400 version by Patrick Monnerat, DATASPHERE.
+      *  Version 1.2.3
+      *
+      *
+      *  WARNING:
+      *     Procedures inflateInit(), inflateInit2(), deflateInit(),
+      *         deflateInit2() and inflateBackInit() need to be called with
+      *         two additional arguments:
+      *         the package version string and the stream control structure.
+      *         size. This is needed because RPG lacks some macro feature.
+      *         Call these procedures as:
+      *             inflateInit(...: ZLIB_VERSION: %size(z_stream))
+      *
+      /if not defined(ZLIB_H_)
+      /define ZLIB_H_
+      *
+      **************************************************************************
+      *                               Constants
+      **************************************************************************
+      *
+      *  Versioning information.
+      *
+     D ZLIB_VERSION    C                   '1.2.3'
+     D ZLIB_VERNUM     C                   X'1230'
+      *
+      *  Other equates.
+      *
+     D Z_NO_FLUSH      C                   0
+     D Z_SYNC_FLUSH    C                   2
+     D Z_FULL_FLUSH    C                   3
+     D Z_FINISH        C                   4
+     D Z_BLOCK         C                   5
+      *
+     D Z_OK            C                   0
+     D Z_STREAM_END    C                   1
+     D Z_NEED_DICT     C                   2
+     D Z_ERRNO         C                   -1
+     D Z_STREAM_ERROR  C                   -2
+     D Z_DATA_ERROR    C                   -3
+     D Z_MEM_ERROR     C                   -4
+     D Z_BUF_ERROR     C                   -5
+     DZ_VERSION_ERROR  C                   -6
+      *
+     D Z_NO_COMPRESSION...
+     D                 C                   0
+     D Z_BEST_SPEED    C                   1
+     D Z_BEST_COMPRESSION...
+     D                 C                   9
+     D Z_DEFAULT_COMPRESSION...
+     D                 C                   -1
+      *
+     D Z_FILTERED      C                   1
+     D Z_HUFFMAN_ONLY  C                   2
+     D Z_RLE           C                   3
+     D Z_DEFAULT_STRATEGY...
+     D                 C                   0
+      *
+     D Z_BINARY        C                   0
+     D Z_ASCII         C                   1
+     D Z_UNKNOWN       C                   2
+      *
+     D Z_DEFLATED      C                   8
+      *
+     D Z_NULL          C                   0
+      *
+      **************************************************************************
+      *                                 Types
+      **************************************************************************
+      *
+     D z_streamp       S               *                                        Stream struct ptr
+     D gzFile          S               *                                        File pointer
+     D z_off_t         S             10i 0                                      Stream offsets
+      *
+      **************************************************************************
+      *                               Structures
+      **************************************************************************
+      *
+      *  The GZIP encode/decode stream support structure.
+      *
+     D z_stream        DS                  align based(z_streamp)
+     D  zs_next_in                     *                                        Next input byte
+     D  zs_avail_in                  10U 0                                      Byte cnt at next_in
+     D  zs_total_in                  10U 0                                      Total bytes read
+     D  zs_next_out                    *                                        Output buffer ptr
+     D  zs_avail_out                 10U 0                                      Room left @ next_out
+     D  zs_total_out                 10U 0                                      Total bytes written
+     D  zs_msg                         *                                        Last errmsg or null
+     D  zs_state                       *                                        Internal state
+     D  zs_zalloc                      *   procptr                              Int. state allocator
+     D  zs_free                        *   procptr                              Int. state dealloc.
+     D  zs_opaque                      *                                        Private alloc. data
+     D  zs_data_type                 10i 0                                      ASC/BIN best guess
+     D  zs_adler                     10u 0                                      Uncompr. adler32 val
+     D                               10U 0                                      Reserved
+     D                               10U 0                                      Ptr. alignment
+      *
+      **************************************************************************
+      *                     Utility function prototypes
+      **************************************************************************
+      *
+     D compress        PR            10I 0 extproc('compress')
+     D  dest                      32767    options(*varsize)                    Destination buffer
+     D  destLen                      10U 0                                      Destination length
+     D  source                    32767    const options(*varsize)              Source buffer
+     D  sourceLen                    10u 0 value                                Source length
+      *
+     D compress2       PR            10I 0 extproc('compress2')
+     D  dest                      32767    options(*varsize)                    Destination buffer
+     D  destLen                      10U 0                                      Destination length
+     D  source                    32767    const options(*varsize)              Source buffer
+     D  sourceLen                    10U 0 value                                Source length
+     D  level                        10I 0 value                                Compression level
+      *
+     D compressBound   PR            10U 0 extproc('compressBound')
+     D  sourceLen                    10U 0 value
+      *
+     D uncompress      PR            10I 0 extproc('uncompress')
+     D  dest                      32767    options(*varsize)                    Destination buffer
+     D  destLen                      10U 0                                      Destination length
+     D  source                    32767    const options(*varsize)              Source buffer
+     D  sourceLen                    10U 0 value                                Source length
+      *
+     D gzopen          PR                  extproc('gzopen')
+     D                                     like(gzFile)
+     D  path                           *   value options(*string)               File pathname
+     D  mode                           *   value options(*string)               Open mode
+      *
+     D gzdopen         PR                  extproc('gzdopen')
+     D                                     like(gzFile)
+     D  fd                           10i 0 value                                File descriptor
+     D  mode                           *   value options(*string)               Open mode
+      *
+     D gzsetparams     PR            10I 0 extproc('gzsetparams')
+     D  file                               value like(gzFile)                   File pointer
+     D  level                        10I 0 value
+     D  strategy                     10i 0 value
+      *
+     D gzread          PR            10I 0 extproc('gzread')
+     D  file                               value like(gzFile)                   File pointer
+     D  buf                       32767    options(*varsize)                    Buffer
+     D  len                          10u 0 value                                Buffer length
+      *
+     D gzwrite         PR            10I 0 extproc('gzwrite')
+     D  file                               value like(gzFile)                   File pointer
+     D  buf                       32767    const options(*varsize)              Buffer
+     D  len                          10u 0 value                                Buffer length
+      *
+     D gzputs          PR            10I 0 extproc('gzputs')
+     D  file                               value like(gzFile)                   File pointer
+     D  s                              *   value options(*string)               String to output
+      *
+     D gzgets          PR              *   extproc('gzgets')
+     D  file                               value like(gzFile)                   File pointer
+     D  buf                       32767    options(*varsize)                    Read buffer
+     D  len                          10i 0 value                                Buffer length
+      *
+     D gzflush         PR            10i 0 extproc('gzflush')
+     D  file                               value like(gzFile)                   File pointer
+     D  flush                        10I 0 value                                Type of flush
+      *
+     D gzseek          PR                  extproc('gzseek')
+     D                                     like(z_off_t)
+     D  file                               value like(gzFile)                   File pointer
+     D  offset                             value like(z_off_t)                  Offset
+     D  whence                       10i 0 value                                Origin
+      *
+     D gzrewind        PR            10i 0 extproc('gzrewind')
+     D  file                               value like(gzFile)                   File pointer
+      *
+     D gztell          PR                  extproc('gztell')
+     D                                     like(z_off_t)
+     D  file                               value like(gzFile)                   File pointer
+      *
+     D gzeof           PR            10i 0 extproc('gzeof')
+     D  file                               value like(gzFile)                   File pointer
+      *
+     D gzclose         PR            10i 0 extproc('gzclose')
+     D  file                               value like(gzFile)                   File pointer
+      *
+     D gzerror         PR              *   extproc('gzerror')                   Error string
+     D  file                               value like(gzFile)                   File pointer
+     D  errnum                       10I 0                                      Error code
+      *
+     D gzclearerr      PR                  extproc('gzclearerr')
+     D  file                               value like(gzFile)                   File pointer
+      *
+      **************************************************************************
+      *                        Basic function prototypes
+      **************************************************************************
+      *
+     D zlibVersion     PR              *   extproc('zlibVersion')               Version string
+      *
+     D deflateInit     PR            10I 0 extproc('deflateInit_')              Init. compression
+     D  strm                               like(z_stream)                       Compression stream
+     D  level                        10I 0 value                                Compression level
+     D  version                        *   value options(*string)               Version string
+     D  stream_size                  10i 0 value                                Stream struct. size
+      *
+     D deflate         PR            10I 0 extproc('deflate')                   Compress data
+     D  strm                               like(z_stream)                       Compression stream
+     D  flush                        10I 0 value                                Flush type required
+      *
+     D deflateEnd      PR            10I 0 extproc('deflateEnd')                Termin. compression
+     D  strm                               like(z_stream)                       Compression stream
+      *
+     D inflateInit     PR            10I 0 extproc('inflateInit_')              Init. expansion
+     D  strm                               like(z_stream)                       Expansion stream
+     D  version                        *   value options(*string)               Version string
+     D  stream_size                  10i 0 value                                Stream struct. size
+      *
+     D inflate         PR            10I 0 extproc('inflate')                   Expand data
+     D  strm                               like(z_stream)                       Expansion stream
+     D  flush                        10I 0 value                                Flush type required
+      *
+     D inflateEnd      PR            10I 0 extproc('inflateEnd')                Termin. expansion
+     D  strm                               like(z_stream)                       Expansion stream
+      *
+      **************************************************************************
+      *                        Advanced function prototypes
+      **************************************************************************
+      *
+     D deflateInit2    PR            10I 0 extproc('deflateInit2_')             Init. compression
+     D  strm                               like(z_stream)                       Compression stream
+     D  level                        10I 0 value                                Compression level
+     D  method                       10I 0 value                                Compression method
+     D  windowBits                   10I 0 value                                log2(window size)
+     D  memLevel                     10I 0 value                                Mem/cmpress tradeoff
+     D  strategy                     10I 0 value                                Compression stategy
+     D  version                        *   value options(*string)               Version string
+     D  stream_size                  10i 0 value                                Stream struct. size
+      *
+     D deflateSetDictionary...
+     D                 PR            10I 0 extproc('deflateSetDictionary')      Init. dictionary
+     D  strm                               like(z_stream)                       Compression stream
+     D  dictionary                32767    const options(*varsize)              Dictionary bytes
+     D  dictLength                   10U 0 value                                Dictionary length
+      *
+     D deflateCopy     PR            10I 0 extproc('deflateCopy')               Compress strm 2 strm
+     D  dest                               like(z_stream)                       Destination stream
+     D  source                             like(z_stream)                       Source stream
+      *
+     D deflateReset    PR            10I 0 extproc('deflateReset')              End and init. stream
+     D  strm                               like(z_stream)                       Compression stream
+      *
+     D deflateParams   PR            10I 0 extproc('deflateParams')             Change level & strat
+     D  strm                               like(z_stream)                       Compression stream
+     D  level                        10I 0 value                                Compression level
+     D  strategy                     10I 0 value                                Compression stategy
+      *
+     D deflateBound    PR            10U 0 extproc('deflateBound')              Change level & strat
+     D  strm                               like(z_stream)                       Compression stream
+     D  sourcelen                    10U 0 value                                Compression level
+      *
+     D deflatePrime    PR            10I 0 extproc('deflatePrime')              Change level & strat
+     D  strm                               like(z_stream)                       Compression stream
+     D  bits                         10I 0 value                                Number of bits to insert
+     D  value                        10I 0 value                                Bits to insert
+      *
+     D inflateInit2    PR            10I 0 extproc('inflateInit2_')             Init. expansion
+     D  strm                               like(z_stream)                       Expansion stream
+     D  windowBits                   10I 0 value                                log2(window size)
+     D  version                        *   value options(*string)               Version string
+     D  stream_size                  10i 0 value                                Stream struct. size
+      *
+     D inflateSetDictionary...
+     D                 PR            10I 0 extproc('inflateSetDictionary')      Init. dictionary
+     D  strm                               like(z_stream)                       Expansion stream
+     D  dictionary                32767    const options(*varsize)              Dictionary bytes
+     D  dictLength                   10U 0 value                                Dictionary length
+      *
+     D inflateSync     PR            10I 0 extproc('inflateSync')               Sync. expansion
+     D  strm                               like(z_stream)                       Expansion stream
+      *
+     D inflateCopy     PR            10I 0 extproc('inflateCopy')
+     D  dest                               like(z_stream)                       Destination stream
+     D  source                             like(z_stream)                       Source stream
+      *
+     D inflateReset    PR            10I 0 extproc('inflateReset')              End and init. stream
+     D  strm                               like(z_stream)                       Expansion stream
+      *
+     D inflateBackInit...
+     D                 PR            10I 0 extproc('inflateBackInit_')
+     D  strm                               like(z_stream)                       Expansion stream
+     D  windowBits                   10I 0 value                                Log2(buffer size)
+     D  window                    32767    options(*varsize)                    Buffer
+     D  version                        *   value options(*string)               Version string
+     D  stream_size                  10i 0 value                                Stream struct. size
+      *
+     D inflateBack     PR            10I 0 extproc('inflateBack')
+     D  strm                               like(z_stream)                       Expansion stream
+     D  in                             *   value procptr                        Input function
+     D  in_desc                        *   value                                Input descriptor
+     D  out                            *   value procptr                        Output function
+     D  out_desc                       *   value                                Output descriptor
+      *
+     D inflateBackEnd  PR            10I 0 extproc('inflateBackEnd')
+     D  strm                               like(z_stream)                       Expansion stream
+      *
+     D zlibCompileFlags...
+     D                 PR            10U 0 extproc('zlibCompileFlags')
+      *
+      **************************************************************************
+      *                        Checksum function prototypes
+      **************************************************************************
+      *
+     D adler32         PR            10U 0 extproc('adler32')                   New checksum
+     D  adler                        10U 0 value                                Old checksum
+     D  buf                       32767    const options(*varsize)              Bytes to accumulate
+     D  len                          10U 0 value                                Buffer length
+      *
+     D crc32           PR            10U 0 extproc('crc32')                     New checksum
+     D  crc                          10U 0 value                                Old checksum
+     D  buf                       32767    const options(*varsize)              Bytes to accumulate
+     D  len                          10U 0 value                                Buffer length
+      *
+      **************************************************************************
+      *                     Miscellaneous function prototypes
+      **************************************************************************
+      *
+     D zError          PR              *   extproc('zError')                    Error string
+     D  err                          10I 0 value                                Error code
+      *
+     D inflateSyncPoint...
+     D                 PR            10I 0 extproc('inflateSyncPoint')
+     D  strm                               like(z_stream)                       Expansion stream
+      *
+     D get_crc_table   PR              *   extproc('get_crc_table')             Ptr to ulongs
+      *
+      /endif
diff --git a/compat/zlib/gzio.c b/compat/zlib/gzio.c
new file mode 100644
index 0000000..8307498
--- /dev/null
+++ b/compat/zlib/gzio.c
@@ -0,0 +1,1026 @@
+/* gzio.c -- IO on .gz files
+ * Copyright (C) 1995-2005 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ *
+ * Compile this file with -DNO_GZCOMPRESS to avoid the compression code.
+ */
+
+/* @(#) $Id: gzio.c,v 1.1 2008/12/18 14:14:59 dkf Exp $ */
+
+#include <stdio.h>
+
+#include "zutil.h"
+
+#ifdef NO_DEFLATE       /* for compatibility with old definition */
+#  define NO_GZCOMPRESS
+#endif
+
+#ifndef NO_DUMMY_DECL
+struct internal_state {int dummy;}; /* for buggy compilers */
+#endif
+
+#ifndef Z_BUFSIZE
+#  ifdef MAXSEG_64K
+#    define Z_BUFSIZE 4096 /* minimize memory usage for 16-bit DOS */
+#  else
+#    define Z_BUFSIZE 16384
+#  endif
+#endif
+#ifndef Z_PRINTF_BUFSIZE
+#  define Z_PRINTF_BUFSIZE 4096
+#endif
+
+#ifdef __MVS__
+#  pragma map (fdopen , "\174\174FDOPEN")
+   FILE *fdopen(int, const char *);
+#endif
+
+#ifndef STDC
+extern voidp  malloc OF((uInt size));
+extern void   free   OF((voidpf ptr));
+#endif
+
+#define ALLOC(size) malloc(size)
+#define TRYFREE(p) {if (p) free(p);}
+
+static int const gz_magic[2] = {0x1f, 0x8b}; /* gzip magic header */
+
+/* gzip flag byte */
+#define ASCII_FLAG   0x01 /* bit 0 set: file probably ascii text */
+#define HEAD_CRC     0x02 /* bit 1 set: header CRC present */
+#define EXTRA_FIELD  0x04 /* bit 2 set: extra field present */
+#define ORIG_NAME    0x08 /* bit 3 set: original file name present */
+#define COMMENT      0x10 /* bit 4 set: file comment present */
+#define RESERVED     0xE0 /* bits 5..7: reserved */
+
+typedef struct gz_stream {
+    z_stream stream;
+    int      z_err;   /* error code for last stream operation */
+    int      z_eof;   /* set if end of input file */
+    FILE     *file;   /* .gz file */
+    Byte     *inbuf;  /* input buffer */
+    Byte     *outbuf; /* output buffer */
+    uLong    crc;     /* crc32 of uncompressed data */
+    char     *msg;    /* error message */
+    char     *path;   /* path name for debugging only */
+    int      transparent; /* 1 if input file is not a .gz file */
+    char     mode;    /* 'w' or 'r' */
+    z_off_t  start;   /* start of compressed data in file (header skipped) */
+    z_off_t  in;      /* bytes into deflate or inflate */
+    z_off_t  out;     /* bytes out of deflate or inflate */
+    int      back;    /* one character push-back */
+    int      last;    /* true if push-back is last character */
+} gz_stream;
+
+
+local gzFile gz_open      OF((const char *path, const char *mode, int  fd));
+local int do_flush        OF((gzFile file, int flush));
+local int    get_byte     OF((gz_stream *s));
+local void   check_header OF((gz_stream *s));
+local int    destroy      OF((gz_stream *s));
+local void   putLong      OF((FILE *file, uLong x));
+local uLong  getLong      OF((gz_stream *s));
+
+/* ===========================================================================
+     Opens a gzip (.gz) file for reading or writing. The mode parameter
+   is as in fopen ("rb" or "wb"). The file is given either by file descriptor
+   or path name (if fd == -1).
+     gz_open returns NULL if the file could not be opened or if there was
+   insufficient memory to allocate the (de)compression state; errno
+   can be checked to distinguish the two cases (if errno is zero, the
+   zlib error is Z_MEM_ERROR).
+*/
+local gzFile gz_open (path, mode, fd)
+    const char *path;
+    const char *mode;
+    int  fd;
+{
+    int err;
+    int level = Z_DEFAULT_COMPRESSION; /* compression level */
+    int strategy = Z_DEFAULT_STRATEGY; /* compression strategy */
+    char *p = (char*)mode;
+    gz_stream *s;
+    char fmode[80]; /* copy of mode, without the compression level */
+    char *m = fmode;
+
+    if (!path || !mode) return Z_NULL;
+
+    s = (gz_stream *)ALLOC(sizeof(gz_stream));
+    if (!s) return Z_NULL;
+
+    s->stream.zalloc = (alloc_func)0;
+    s->stream.zfree = (free_func)0;
+    s->stream.opaque = (voidpf)0;
+    s->stream.next_in = s->inbuf = Z_NULL;
+    s->stream.next_out = s->outbuf = Z_NULL;
+    s->stream.avail_in = s->stream.avail_out = 0;
+    s->file = NULL;
+    s->z_err = Z_OK;
+    s->z_eof = 0;
+    s->in = 0;
+    s->out = 0;
+    s->back = EOF;
+    s->crc = crc32(0L, Z_NULL, 0);
+    s->msg = NULL;
+    s->transparent = 0;
+
+    s->path = (char*)ALLOC(strlen(path)+1);
+    if (s->path == NULL) {
+        return destroy(s), (gzFile)Z_NULL;
+    }
+    strcpy(s->path, path); /* do this early for debugging */
+
+    s->mode = '\0';
+    do {
+        if (*p == 'r') s->mode = 'r';
+        if (*p == 'w' || *p == 'a') s->mode = 'w';
+        if (*p >= '0' && *p <= '9') {
+            level = *p - '0';
+        } else if (*p == 'f') {
+          strategy = Z_FILTERED;
+        } else if (*p == 'h') {
+          strategy = Z_HUFFMAN_ONLY;
+        } else if (*p == 'R') {
+          strategy = Z_RLE;
+        } else {
+            *m++ = *p; /* copy the mode */
+        }
+    } while (*p++ && m != fmode + sizeof(fmode));
+    if (s->mode == '\0') return destroy(s), (gzFile)Z_NULL;
+
+    if (s->mode == 'w') {
+#ifdef NO_GZCOMPRESS
+        err = Z_STREAM_ERROR;
+#else
+        err = deflateInit2(&(s->stream), level,
+                           Z_DEFLATED, -MAX_WBITS, DEF_MEM_LEVEL, strategy);
+        /* windowBits is passed < 0 to suppress zlib header */
+
+        s->stream.next_out = s->outbuf = (Byte*)ALLOC(Z_BUFSIZE);
+#endif
+        if (err != Z_OK || s->outbuf == Z_NULL) {
+            return destroy(s), (gzFile)Z_NULL;
+        }
+    } else {
+        s->stream.next_in  = s->inbuf = (Byte*)ALLOC(Z_BUFSIZE);
+
+        err = inflateInit2(&(s->stream), -MAX_WBITS);
+        /* windowBits is passed < 0 to tell that there is no zlib header.
+         * Note that in this case inflate *requires* an extra "dummy" byte
+         * after the compressed stream in order to complete decompression and
+         * return Z_STREAM_END. Here the gzip CRC32 ensures that 4 bytes are
+         * present after the compressed stream.
+         */
+        if (err != Z_OK || s->inbuf == Z_NULL) {
+            return destroy(s), (gzFile)Z_NULL;
+        }
+    }
+    s->stream.avail_out = Z_BUFSIZE;
+
+    errno = 0;
+    s->file = fd < 0 ? F_OPEN(path, fmode) : (FILE*)fdopen(fd, fmode);
+
+    if (s->file == NULL) {
+        return destroy(s), (gzFile)Z_NULL;
+    }
+    if (s->mode == 'w') {
+        /* Write a very simple .gz header:
+         */
+        fprintf(s->file, "%c%c%c%c%c%c%c%c%c%c", gz_magic[0], gz_magic[1],
+             Z_DEFLATED, 0 /*flags*/, 0,0,0,0 /*time*/, 0 /*xflags*/, OS_CODE);
+        s->start = 10L;
+        /* We use 10L instead of ftell(s->file) to because ftell causes an
+         * fflush on some systems. This version of the library doesn't use
+         * start anyway in write mode, so this initialization is not
+         * necessary.
+         */
+    } else {
+        check_header(s); /* skip the .gz header */
+        s->start = ftell(s->file) - s->stream.avail_in;
+    }
+
+    return (gzFile)s;
+}
+
+/* ===========================================================================
+     Opens a gzip (.gz) file for reading or writing.
+*/
+gzFile ZEXPORT gzopen (path, mode)
+    const char *path;
+    const char *mode;
+{
+    return gz_open (path, mode, -1);
+}
+
+/* ===========================================================================
+     Associate a gzFile with the file descriptor fd. fd is not dup'ed here
+   to mimic the behavio(u)r of fdopen.
+*/
+gzFile ZEXPORT gzdopen (fd, mode)
+    int fd;
+    const char *mode;
+{
+    char name[46];      /* allow for up to 128-bit integers */
+
+    if (fd < 0) return (gzFile)Z_NULL;
+    sprintf(name, "<fd:%d>", fd); /* for debugging */
+
+    return gz_open (name, mode, fd);
+}
+
+/* ===========================================================================
+ * Update the compression level and strategy
+ */
+int ZEXPORT gzsetparams (file, level, strategy)
+    gzFile file;
+    int level;
+    int strategy;
+{
+    gz_stream *s = (gz_stream*)file;
+
+    if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR;
+
+    /* Make room to allow flushing */
+    if (s->stream.avail_out == 0) {
+
+        s->stream.next_out = s->outbuf;
+        if (fwrite(s->outbuf, 1, Z_BUFSIZE, s->file) != Z_BUFSIZE) {
+            s->z_err = Z_ERRNO;
+        }
+        s->stream.avail_out = Z_BUFSIZE;
+    }
+
+    return deflateParams (&(s->stream), level, strategy);
+}
+
+/* ===========================================================================
+     Read a byte from a gz_stream; update next_in and avail_in. Return EOF
+   for end of file.
+   IN assertion: the stream s has been sucessfully opened for reading.
+*/
+local int get_byte(s)
+    gz_stream *s;
+{
+    if (s->z_eof) return EOF;
+    if (s->stream.avail_in == 0) {
+        errno = 0;
+        s->stream.avail_in = (uInt)fread(s->inbuf, 1, Z_BUFSIZE, s->file);
+        if (s->stream.avail_in == 0) {
+            s->z_eof = 1;
+            if (ferror(s->file)) s->z_err = Z_ERRNO;
+            return EOF;
+        }
+        s->stream.next_in = s->inbuf;
+    }
+    s->stream.avail_in--;
+    return *(s->stream.next_in)++;
+}
+
+/* ===========================================================================
+      Check the gzip header of a gz_stream opened for reading. Set the stream
+    mode to transparent if the gzip magic header is not present; set s->err
+    to Z_DATA_ERROR if the magic header is present but the rest of the header
+    is incorrect.
+    IN assertion: the stream s has already been created sucessfully;
+       s->stream.avail_in is zero for the first time, but may be non-zero
+       for concatenated .gz files.
+*/
+local void check_header(s)
+    gz_stream *s;
+{
+    int method; /* method byte */
+    int flags;  /* flags byte */
+    uInt len;
+    int c;
+
+    /* Assure two bytes in the buffer so we can peek ahead -- handle case
+       where first byte of header is at the end of the buffer after the last
+       gzip segment */
+    len = s->stream.avail_in;
+    if (len < 2) {
+        if (len) s->inbuf[0] = s->stream.next_in[0];
+        errno = 0;
+        len = (uInt)fread(s->inbuf + len, 1, Z_BUFSIZE >> len, s->file);
+        if (len == 0 && ferror(s->file)) s->z_err = Z_ERRNO;
+        s->stream.avail_in += len;
+        s->stream.next_in = s->inbuf;
+        if (s->stream.avail_in < 2) {
+            s->transparent = s->stream.avail_in;
+            return;
+        }
+    }
+
+    /* Peek ahead to check the gzip magic header */
+    if (s->stream.next_in[0] != gz_magic[0] ||
+        s->stream.next_in[1] != gz_magic[1]) {
+        s->transparent = 1;
+        return;
+    }
+    s->stream.avail_in -= 2;
+    s->stream.next_in += 2;
+
+    /* Check the rest of the gzip header */
+    method = get_byte(s);
+    flags = get_byte(s);
+    if (method != Z_DEFLATED || (flags & RESERVED) != 0) {
+        s->z_err = Z_DATA_ERROR;
+        return;
+    }
+
+    /* Discard time, xflags and OS code: */
+    for (len = 0; len < 6; len++) (void)get_byte(s);
+
+    if ((flags & EXTRA_FIELD) != 0) { /* skip the extra field */
+        len  =  (uInt)get_byte(s);
+        len += ((uInt)get_byte(s))<<8;
+        /* len is garbage if EOF but the loop below will quit anyway */
+        while (len-- != 0 && get_byte(s) != EOF) ;
+    }
+    if ((flags & ORIG_NAME) != 0) { /* skip the original file name */
+        while ((c = get_byte(s)) != 0 && c != EOF) ;
+    }
+    if ((flags & COMMENT) != 0) {   /* skip the .gz file comment */
+        while ((c = get_byte(s)) != 0 && c != EOF) ;
+    }
+    if ((flags & HEAD_CRC) != 0) {  /* skip the header crc */
+        for (len = 0; len < 2; len++) (void)get_byte(s);
+    }
+    s->z_err = s->z_eof ? Z_DATA_ERROR : Z_OK;
+}
+
+ /* ===========================================================================
+ * Cleanup then free the given gz_stream. Return a zlib error code.
+   Try freeing in the reverse order of allocations.
+ */
+local int destroy (s)
+    gz_stream *s;
+{
+    int err = Z_OK;
+
+    if (!s) return Z_STREAM_ERROR;
+
+    TRYFREE(s->msg);
+
+    if (s->stream.state != NULL) {
+        if (s->mode == 'w') {
+#ifdef NO_GZCOMPRESS
+            err = Z_STREAM_ERROR;
+#else
+            err = deflateEnd(&(s->stream));
+#endif
+        } else if (s->mode == 'r') {
+            err = inflateEnd(&(s->stream));
+        }
+    }
+    if (s->file != NULL && fclose(s->file)) {
+#ifdef ESPIPE
+        if (errno != ESPIPE) /* fclose is broken for pipes in HP/UX */
+#endif
+            err = Z_ERRNO;
+    }
+    if (s->z_err < 0) err = s->z_err;
+
+    TRYFREE(s->inbuf);
+    TRYFREE(s->outbuf);
+    TRYFREE(s->path);
+    TRYFREE(s);
+    return err;
+}
+
+/* ===========================================================================
+     Reads the given number of uncompressed bytes from the compressed file.
+   gzread returns the number of bytes actually read (0 for end of file).
+*/
+int ZEXPORT gzread (file, buf, len)
+    gzFile file;
+    voidp buf;
+    unsigned len;
+{
+    gz_stream *s = (gz_stream*)file;
+    Bytef *start = (Bytef*)buf; /* starting point for crc computation */
+    Byte  *next_out; /* == stream.next_out but not forced far (for MSDOS) */
+
+    if (s == NULL || s->mode != 'r') return Z_STREAM_ERROR;
+
+    if (s->z_err == Z_DATA_ERROR || s->z_err == Z_ERRNO) return -1;
+    if (s->z_err == Z_STREAM_END) return 0;  /* EOF */
+
+    next_out = (Byte*)buf;
+    s->stream.next_out = (Bytef*)buf;
+    s->stream.avail_out = len;
+
+    if (s->stream.avail_out && s->back != EOF) {
+        *next_out++ = s->back;
+        s->stream.next_out++;
+        s->stream.avail_out--;
+        s->back = EOF;
+        s->out++;
+        start++;
+        if (s->last) {
+            s->z_err = Z_STREAM_END;
+            return 1;
+        }
+    }
+
+    while (s->stream.avail_out != 0) {
+
+        if (s->transparent) {
+            /* Copy first the lookahead bytes: */
+            uInt n = s->stream.avail_in;
+            if (n > s->stream.avail_out) n = s->stream.avail_out;
+            if (n > 0) {
+                zmemcpy(s->stream.next_out, s->stream.next_in, n);
+                next_out += n;
+                s->stream.next_out = next_out;
+                s->stream.next_in   += n;
+                s->stream.avail_out -= n;
+                s->stream.avail_in  -= n;
+            }
+            if (s->stream.avail_out > 0) {
+                s->stream.avail_out -=
+                    (uInt)fread(next_out, 1, s->stream.avail_out, s->file);
+            }
+            len -= s->stream.avail_out;
+            s->in  += len;
+            s->out += len;
+            if (len == 0) s->z_eof = 1;
+            return (int)len;
+        }
+        if (s->stream.avail_in == 0 && !s->z_eof) {
+
+            errno = 0;
+            s->stream.avail_in = (uInt)fread(s->inbuf, 1, Z_BUFSIZE, s->file);
+            if (s->stream.avail_in == 0) {
+                s->z_eof = 1;
+                if (ferror(s->file)) {
+                    s->z_err = Z_ERRNO;
+                    break;
+                }
+            }
+            s->stream.next_in = s->inbuf;
+        }
+        s->in += s->stream.avail_in;
+        s->out += s->stream.avail_out;
+        s->z_err = inflate(&(s->stream), Z_NO_FLUSH);
+        s->in -= s->stream.avail_in;
+        s->out -= s->stream.avail_out;
+
+        if (s->z_err == Z_STREAM_END) {
+            /* Check CRC and original size */
+            s->crc = crc32(s->crc, start, (uInt)(s->stream.next_out - start));
+            start = s->stream.next_out;
+
+            if (getLong(s) != s->crc) {
+                s->z_err = Z_DATA_ERROR;
+            } else {
+                (void)getLong(s);
+                /* The uncompressed length returned by above getlong() may be
+                 * different from s->out in case of concatenated .gz files.
+                 * Check for such files:
+                 */
+                check_header(s);
+                if (s->z_err == Z_OK) {
+                    inflateReset(&(s->stream));
+                    s->crc = crc32(0L, Z_NULL, 0);
+                }
+            }
+        }
+        if (s->z_err != Z_OK || s->z_eof) break;
+    }
+    s->crc = crc32(s->crc, start, (uInt)(s->stream.next_out - start));
+
+    if (len == s->stream.avail_out &&
+        (s->z_err == Z_DATA_ERROR || s->z_err == Z_ERRNO))
+        return -1;
+    return (int)(len - s->stream.avail_out);
+}
+
+
+/* ===========================================================================
+      Reads one byte from the compressed file. gzgetc returns this byte
+   or -1 in case of end of file or error.
+*/
+int ZEXPORT gzgetc(file)
+    gzFile file;
+{
+    unsigned char c;
+
+    return gzread(file, &c, 1) == 1 ? c : -1;
+}
+
+
+/* ===========================================================================
+      Push one byte back onto the stream.
+*/
+int ZEXPORT gzungetc(c, file)
+    int c;
+    gzFile file;
+{
+    gz_stream *s = (gz_stream*)file;
+
+    if (s == NULL || s->mode != 'r' || c == EOF || s->back != EOF) return EOF;
+    s->back = c;
+    s->out--;
+    s->last = (s->z_err == Z_STREAM_END);
+    if (s->last) s->z_err = Z_OK;
+    s->z_eof = 0;
+    return c;
+}
+
+
+/* ===========================================================================
+      Reads bytes from the compressed file until len-1 characters are
+   read, or a newline character is read and transferred to buf, or an
+   end-of-file condition is encountered.  The string is then terminated
+   with a null character.
+      gzgets returns buf, or Z_NULL in case of error.
+
+      The current implementation is not optimized at all.
+*/
+char * ZEXPORT gzgets(file, buf, len)
+    gzFile file;
+    char *buf;
+    int len;
+{
+    char *b = buf;
+    if (buf == Z_NULL || len <= 0) return Z_NULL;
+
+    while (--len > 0 && gzread(file, buf, 1) == 1 && *buf++ != '\n') ;
+    *buf = '\0';
+    return b == buf && len > 0 ? Z_NULL : b;
+}
+
+
+#ifndef NO_GZCOMPRESS
+/* ===========================================================================
+     Writes the given number of uncompressed bytes into the compressed file.
+   gzwrite returns the number of bytes actually written (0 in case of error).
+*/
+int ZEXPORT gzwrite (file, buf, len)
+    gzFile file;
+    voidpc buf;
+    unsigned len;
+{
+    gz_stream *s = (gz_stream*)file;
+
+    if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR;
+
+    s->stream.next_in = (Bytef*)buf;
+    s->stream.avail_in = len;
+
+    while (s->stream.avail_in != 0) {
+
+        if (s->stream.avail_out == 0) {
+
+            s->stream.next_out = s->outbuf;
+            if (fwrite(s->outbuf, 1, Z_BUFSIZE, s->file) != Z_BUFSIZE) {
+                s->z_err = Z_ERRNO;
+                break;
+            }
+            s->stream.avail_out = Z_BUFSIZE;
+        }
+        s->in += s->stream.avail_in;
+        s->out += s->stream.avail_out;
+        s->z_err = deflate(&(s->stream), Z_NO_FLUSH);
+        s->in -= s->stream.avail_in;
+        s->out -= s->stream.avail_out;
+        if (s->z_err != Z_OK) break;
+    }
+    s->crc = crc32(s->crc, (const Bytef *)buf, len);
+
+    return (int)(len - s->stream.avail_in);
+}
+
+
+/* ===========================================================================
+     Converts, formats, and writes the args to the compressed file under
+   control of the format string, as in fprintf. gzprintf returns the number of
+   uncompressed bytes actually written (0 in case of error).
+*/
+#ifdef STDC
+#include <stdarg.h>
+
+int ZEXPORTVA gzprintf (gzFile file, const char *format, /* args */ ...)
+{
+    char buf[Z_PRINTF_BUFSIZE];
+    va_list va;
+    int len;
+
+    buf[sizeof(buf) - 1] = 0;
+    va_start(va, format);
+#ifdef NO_vsnprintf
+#  ifdef HAS_vsprintf_void
+    (void)vsprintf(buf, format, va);
+    va_end(va);
+    for (len = 0; len < sizeof(buf); len++)
+        if (buf[len] == 0) break;
+#  else
+    len = vsprintf(buf, format, va);
+    va_end(va);
+#  endif
+#else
+#  ifdef HAS_vsnprintf_void
+    (void)vsnprintf(buf, sizeof(buf), format, va);
+    va_end(va);
+    len = strlen(buf);
+#  else
+    len = vsnprintf(buf, sizeof(buf), format, va);
+    va_end(va);
+#  endif
+#endif
+    if (len <= 0 || len >= (int)sizeof(buf) || buf[sizeof(buf) - 1] != 0)
+        return 0;
+    return gzwrite(file, buf, (unsigned)len);
+}
+#else /* not ANSI C */
+
+int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
+                       a11, a12, a13, a14, a15, a16, a17, a18, a19, a20)
+    gzFile file;
+    const char *format;
+    int a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
+        a11, a12, a13, a14, a15, a16, a17, a18, a19, a20;
+{
+    char buf[Z_PRINTF_BUFSIZE];
+    int len;
+
+    buf[sizeof(buf) - 1] = 0;
+#ifdef NO_snprintf
+#  ifdef HAS_sprintf_void
+    sprintf(buf, format, a1, a2, a3, a4, a5, a6, a7, a8,
+            a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
+    for (len = 0; len < sizeof(buf); len++)
+        if (buf[len] == 0) break;
+#  else
+    len = sprintf(buf, format, a1, a2, a3, a4, a5, a6, a7, a8,
+                a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
+#  endif
+#else
+#  ifdef HAS_snprintf_void
+    snprintf(buf, sizeof(buf), format, a1, a2, a3, a4, a5, a6, a7, a8,
+             a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
+    len = strlen(buf);
+#  else
+    len = snprintf(buf, sizeof(buf), format, a1, a2, a3, a4, a5, a6, a7, a8,
+                 a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
+#  endif
+#endif
+    if (len <= 0 || len >= sizeof(buf) || buf[sizeof(buf) - 1] != 0)
+        return 0;
+    return gzwrite(file, buf, len);
+}
+#endif
+
+/* ===========================================================================
+      Writes c, converted to an unsigned char, into the compressed file.
+   gzputc returns the value that was written, or -1 in case of error.
+*/
+int ZEXPORT gzputc(file, c)
+    gzFile file;
+    int c;
+{
+    unsigned char cc = (unsigned char) c; /* required for big endian systems */
+
+    return gzwrite(file, &cc, 1) == 1 ? (int)cc : -1;
+}
+
+
+/* ===========================================================================
+      Writes the given null-terminated string to the compressed file, excluding
+   the terminating null character.
+      gzputs returns the number of characters written, or -1 in case of error.
+*/
+int ZEXPORT gzputs(file, s)
+    gzFile file;
+    const char *s;
+{
+    return gzwrite(file, (char*)s, (unsigned)strlen(s));
+}
+
+
+/* ===========================================================================
+     Flushes all pending output into the compressed file. The parameter
+   flush is as in the deflate() function.
+*/
+local int do_flush (file, flush)
+    gzFile file;
+    int flush;
+{
+    uInt len;
+    int done = 0;
+    gz_stream *s = (gz_stream*)file;
+
+    if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR;
+
+    s->stream.avail_in = 0; /* should be zero already anyway */
+
+    for (;;) {
+        len = Z_BUFSIZE - s->stream.avail_out;
+
+        if (len != 0) {
+            if ((uInt)fwrite(s->outbuf, 1, len, s->file) != len) {
+                s->z_err = Z_ERRNO;
+                return Z_ERRNO;
+            }
+            s->stream.next_out = s->outbuf;
+            s->stream.avail_out = Z_BUFSIZE;
+        }
+        if (done) break;
+        s->out += s->stream.avail_out;
+        s->z_err = deflate(&(s->stream), flush);
+        s->out -= s->stream.avail_out;
+
+        /* Ignore the second of two consecutive flushes: */
+        if (len == 0 && s->z_err == Z_BUF_ERROR) s->z_err = Z_OK;
+
+        /* deflate has finished flushing only when it hasn't used up
+         * all the available space in the output buffer:
+         */
+        done = (s->stream.avail_out != 0 || s->z_err == Z_STREAM_END);
+
+        if (s->z_err != Z_OK && s->z_err != Z_STREAM_END) break;
+    }
+    return  s->z_err == Z_STREAM_END ? Z_OK : s->z_err;
+}
+
+int ZEXPORT gzflush (file, flush)
+     gzFile file;
+     int flush;
+{
+    gz_stream *s = (gz_stream*)file;
+    int err = do_flush (file, flush);
+
+    if (err) return err;
+    fflush(s->file);
+    return  s->z_err == Z_STREAM_END ? Z_OK : s->z_err;
+}
+#endif /* NO_GZCOMPRESS */
+
+/* ===========================================================================
+      Sets the starting position for the next gzread or gzwrite on the given
+   compressed file. The offset represents a number of bytes in the
+      gzseek returns the resulting offset location as measured in bytes from
+   the beginning of the uncompressed stream, or -1 in case of error.
+      SEEK_END is not implemented, returns error.
+      In this version of the library, gzseek can be extremely slow.
+*/
+z_off_t ZEXPORT gzseek (file, offset, whence)
+    gzFile file;
+    z_off_t offset;
+    int whence;
+{
+    gz_stream *s = (gz_stream*)file;
+
+    if (s == NULL || whence == SEEK_END ||
+        s->z_err == Z_ERRNO || s->z_err == Z_DATA_ERROR) {
+        return -1L;
+    }
+
+    if (s->mode == 'w') {
+#ifdef NO_GZCOMPRESS
+        return -1L;
+#else
+        if (whence == SEEK_SET) {
+            offset -= s->in;
+        }
+        if (offset < 0) return -1L;
+
+        /* At this point, offset is the number of zero bytes to write. */
+        if (s->inbuf == Z_NULL) {
+            s->inbuf = (Byte*)ALLOC(Z_BUFSIZE); /* for seeking */
+            if (s->inbuf == Z_NULL) return -1L;
+            zmemzero(s->inbuf, Z_BUFSIZE);
+        }
+        while (offset > 0)  {
+            uInt size = Z_BUFSIZE;
+            if (offset < Z_BUFSIZE) size = (uInt)offset;
+
+            size = gzwrite(file, s->inbuf, size);
+            if (size == 0) return -1L;
+
+            offset -= size;
+        }
+        return s->in;
+#endif
+    }
+    /* Rest of function is for reading only */
+
+    /* compute absolute position */
+    if (whence == SEEK_CUR) {
+        offset += s->out;
+    }
+    if (offset < 0) return -1L;
+
+    if (s->transparent) {
+        /* map to fseek */
+        s->back = EOF;
+        s->stream.avail_in = 0;
+        s->stream.next_in = s->inbuf;
+        if (fseek(s->file, offset, SEEK_SET) < 0) return -1L;
+
+        s->in = s->out = offset;
+        return offset;
+    }
+
+    /* For a negative seek, rewind and use positive seek */
+    if (offset >= s->out) {
+        offset -= s->out;
+    } else if (gzrewind(file) < 0) {
+        return -1L;
+    }
+    /* offset is now the number of bytes to skip. */
+
+    if (offset != 0 && s->outbuf == Z_NULL) {
+        s->outbuf = (Byte*)ALLOC(Z_BUFSIZE);
+        if (s->outbuf == Z_NULL) return -1L;
+    }
+    if (offset && s->back != EOF) {
+        s->back = EOF;
+        s->out++;
+        offset--;
+        if (s->last) s->z_err = Z_STREAM_END;
+    }
+    while (offset > 0)  {
+        int size = Z_BUFSIZE;
+        if (offset < Z_BUFSIZE) size = (int)offset;
+
+        size = gzread(file, s->outbuf, (uInt)size);
+        if (size <= 0) return -1L;
+        offset -= size;
+    }
+    return s->out;
+}
+
+/* ===========================================================================
+     Rewinds input file.
+*/
+int ZEXPORT gzrewind (file)
+    gzFile file;
+{
+    gz_stream *s = (gz_stream*)file;
+
+    if (s == NULL || s->mode != 'r') return -1;
+
+    s->z_err = Z_OK;
+    s->z_eof = 0;
+    s->back = EOF;
+    s->stream.avail_in = 0;
+    s->stream.next_in = s->inbuf;
+    s->crc = crc32(0L, Z_NULL, 0);
+    if (!s->transparent) (void)inflateReset(&s->stream);
+    s->in = 0;
+    s->out = 0;
+    return fseek(s->file, s->start, SEEK_SET);
+}
+
+/* ===========================================================================
+     Returns the starting position for the next gzread or gzwrite on the
+   given compressed file. This position represents a number of bytes in the
+   uncompressed data stream.
+*/
+z_off_t ZEXPORT gztell (file)
+    gzFile file;
+{
+    return gzseek(file, 0L, SEEK_CUR);
+}
+
+/* ===========================================================================
+     Returns 1 when EOF has previously been detected reading the given
+   input stream, otherwise zero.
+*/
+int ZEXPORT gzeof (file)
+    gzFile file;
+{
+    gz_stream *s = (gz_stream*)file;
+
+    /* With concatenated compressed files that can have embedded
+     * crc trailers, z_eof is no longer the only/best indicator of EOF
+     * on a gz_stream. Handle end-of-stream error explicitly here.
+     */
+    if (s == NULL || s->mode != 'r') return 0;
+    if (s->z_eof) return 1;
+    return s->z_err == Z_STREAM_END;
+}
+
+/* ===========================================================================
+     Returns 1 if reading and doing so transparently, otherwise zero.
+*/
+int ZEXPORT gzdirect (file)
+    gzFile file;
+{
+    gz_stream *s = (gz_stream*)file;
+
+    if (s == NULL || s->mode != 'r') return 0;
+    return s->transparent;
+}
+
+/* ===========================================================================
+   Outputs a long in LSB order to the given file
+*/
+local void putLong (file, x)
+    FILE *file;
+    uLong x;
+{
+    int n;
+    for (n = 0; n < 4; n++) {
+        fputc((int)(x & 0xff), file);
+        x >>= 8;
+    }
+}
+
+/* ===========================================================================
+   Reads a long in LSB order from the given gz_stream. Sets z_err in case
+   of error.
+*/
+local uLong getLong (s)
+    gz_stream *s;
+{
+    uLong x = (uLong)get_byte(s);
+    int c;
+
+    x += ((uLong)get_byte(s))<<8;
+    x += ((uLong)get_byte(s))<<16;
+    c = get_byte(s);
+    if (c == EOF) s->z_err = Z_DATA_ERROR;
+    x += ((uLong)c)<<24;
+    return x;
+}
+
+/* ===========================================================================
+     Flushes all pending output if necessary, closes the compressed file
+   and deallocates all the (de)compression state.
+*/
+int ZEXPORT gzclose (file)
+    gzFile file;
+{
+    gz_stream *s = (gz_stream*)file;
+
+    if (s == NULL) return Z_STREAM_ERROR;
+
+    if (s->mode == 'w') {
+#ifdef NO_GZCOMPRESS
+        return Z_STREAM_ERROR;
+#else
+        if (do_flush (file, Z_FINISH) != Z_OK)
+            return destroy((gz_stream*)file);
+
+        putLong (s->file, s->crc);
+        putLong (s->file, (uLong)(s->in & 0xffffffff));
+#endif
+    }
+    return destroy((gz_stream*)file);
+}
+
+#ifdef STDC
+#  define zstrerror(errnum) strerror(errnum)
+#else
+#  define zstrerror(errnum) ""
+#endif
+
+/* ===========================================================================
+     Returns the error message for the last error which occurred on the
+   given compressed file. errnum is set to zlib error number. If an
+   error occurred in the file system and not in the compression library,
+   errnum is set to Z_ERRNO and the application may consult errno
+   to get the exact error code.
+*/
+const char * ZEXPORT gzerror (file, errnum)
+    gzFile file;
+    int *errnum;
+{
+    char *m;
+    gz_stream *s = (gz_stream*)file;
+
+    if (s == NULL) {
+        *errnum = Z_STREAM_ERROR;
+        return (const char*)ERR_MSG(Z_STREAM_ERROR);
+    }
+    *errnum = s->z_err;
+    if (*errnum == Z_OK) return (const char*)"";
+
+    m = (char*)(*errnum == Z_ERRNO ? zstrerror(errno) : s->stream.msg);
+
+    if (m == NULL || *m == '\0') m = (char*)ERR_MSG(s->z_err);
+
+    TRYFREE(s->msg);
+    s->msg = (char*)ALLOC(strlen(s->path) + strlen(m) + 3);
+    if (s->msg == Z_NULL) return (const char*)ERR_MSG(Z_MEM_ERROR);
+    strcpy(s->msg, s->path);
+    strcat(s->msg, ": ");
+    strcat(s->msg, m);
+    return (const char*)s->msg;
+}
+
+/* ===========================================================================
+     Clear the error and end-of-file flags, and do the same for the real file.
+*/
+void ZEXPORT gzclearerr (file)
+    gzFile file;
+{
+    gz_stream *s = (gz_stream*)file;
+
+    if (s == NULL) return;
+    if (s->z_err != Z_STREAM_END) s->z_err = Z_OK;
+    s->z_eof = 0;
+    clearerr(s->file);
+}
diff --git a/compat/zlib/old/zlib.html b/compat/zlib/old/zlib.html
new file mode 100644
index 0000000..8c1b190
--- /dev/null
+++ b/compat/zlib/old/zlib.html
@@ -0,0 +1,971 @@
+<html>
+<head>
+ <title>
+ zlib general purpose compression library version 1.1.4
+ </title>
+</head>
+<body bgcolor="White" text="Black" vlink="Red" alink="Navy" link="Red">
+<!-- background="zlibbg.gif" -->
+
+<h1> zlib 1.1.4 Manual </h1>
+<hr>
+<a name="Contents"><h2>Contents</h2>
+<ol type="I">
+<li> <a href="#Prologue">Prologue</a>
+<li> <a href="#Introduction">Introduction</a>
+<li> <a href="#Utility functions">Utility functions</a>
+<li> <a href="#Basic functions">Basic functions</a>
+<li> <a href="#Advanced functions">Advanced functions</a>
+<li> <a href="#Constants">Constants</a>
+<li> <a href="#struct z_stream_s">struct z_stream_s</a>
+<li> <a href="#Checksum functions">Checksum functions</a>
+<li> <a href="#Misc">Misc</a>
+</ol>
+<hr>
+<a name="Prologue"><h2> Prologue </h2>
+  'zlib' general purpose compression library version 1.1.4, March 11th, 2002
+  <p>
+  Copyright (C) 1995-2002 Jean-loup Gailly and Mark Adler
+  <p>
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+  <p>
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+  <ol>
+   <li> The origin of this software must not be misrepresented ; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+   <li> Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+   <li> This notice may not be removed or altered from any source distribution.
+  </ol>
+
+  <dl>
+  <dt>Jean-loup Gailly
+  <dd><a href="mailto:jloup@gzip.org">jloup@gzip.org</a>
+  <dt>Mark Adler
+  <dd><a href="mailto:madler@alumni.caltech.edu">madler@alumni.caltech.edu</a>
+  </dl>
+
+  The data format used by the zlib library is described by RFCs (Request for
+  Comments) 1950 to 1952 in the files
+  <a href="ftp://ds.internic.net/rfc/rfc1950.txt">
+  ftp://ds.internic.net/rfc/rfc1950.txt </a>
+  (zlib format),
+  <a href="ftp://ds.internic.net/rfc/rfc1951.txt">
+  rfc1951.txt </a>
+  (<a href="#deflate">deflate</a> format) and
+  <a href="ftp://ds.internic.net/rfc/rfc1952.txt">
+  rfc1952.txt </a>
+  (gzip format).
+  <p>
+  This manual is converted from zlib.h by
+  <a href="mailto:piaip@csie.ntu.edu.tw"> piaip </a>
+  <p>
+  Visit <a href="http://ftp.cdrom.com/pub/infozip/zlib/">
+  http://ftp.cdrom.com/pub/infozip/zlib/</a>
+  for the official zlib web page.
+  <p>
+
+<hr>
+<a name="Introduction"><h2> Introduction </h2>
+     The 'zlib' compression library provides in-memory compression and
+  decompression functions, including integrity checks of the uncompressed
+  data.  This version of the library supports only one compression method
+  (deflation) but other algorithms will be added later and will have the same
+  stream interface.
+  <p>
+
+     Compression can be done in a single step if the buffers are large
+  enough (for example if an input file is mmap'ed), or can be done by
+  repeated calls of the compression function.  In the latter case, the
+  application must provide more input and/or consume the output
+  (providing more output space) before each call.
+  <p>
+
+     The library also supports reading and writing files in gzip (.gz) format
+  with an interface similar to that of stdio.
+  <p>
+
+     The library does not install any signal handler. The decoder checks
+  the consistency of the compressed data, so the library should never
+  crash even in case of corrupted input.
+  <p>
+
+<hr>
+<a name="Utility functions"><h2> Utility functions </h2>
+     The following utility functions are implemented on top of the
+   <a href="#Basic functions">basic stream-oriented functions</a>.
+   To simplify the interface, some
+   default options are assumed (compression level and memory usage,
+   standard memory allocation functions). The source code of these
+   utility functions can easily be modified if you need special options.
+<h3> Function list </h3>
+<ul>
+<li> int  <a href="#compress">compress</a> (Bytef *dest,   uLongf *destLen, const Bytef *source, uLong sourceLen);
+<li> int  <a href="#compress2">compress2</a> (Bytef *dest,   uLongf *destLen, const Bytef *source, uLong sourceLen, int level);
+<li> int  <a href="#uncompress">uncompress</a> (Bytef *dest,   uLongf *destLen, const Bytef *source, uLong sourceLen);
+<li> typedef voidp gzFile;
+<li>  gzFile  <a href="#gzopen">gzopen</a>  (const char *path, const char *mode);
+<li> gzFile  <a href="#gzdopen">gzdopen</a>  (int fd, const char *mode);
+<li> int  <a href="#gzsetparams">gzsetparams</a> (gzFile file, int level, int strategy);
+<li> int     <a href="#gzread">gzread</a>  (gzFile file, voidp buf, unsigned len);
+<li> int     <a href="#gzwrite">gzwrite</a> (gzFile file, const voidp buf, unsigned len);
+<li> int VA   <a href="#gzprintf">gzprintf</a> (gzFile file, const char *format, ...);
+<li> int  <a href="#gzputs">gzputs</a> (gzFile file, const char *s);
+<li> char *  <a href="#gzgets">gzgets</a> (gzFile file, char *buf, int len);
+<li> int     <a href="#gzputc">gzputc</a> (gzFile file, int c);
+<li> int     <a href="#gzgetc">gzgetc</a> (gzFile file);
+<li> int     <a href="#gzflush">gzflush</a> (gzFile file, int flush);
+<li> z_off_t     <a href="#gzseek">gzseek</a> (gzFile file, z_off_t offset, int whence);
+<li> z_off_t     <a href="#gztell">gztell</a> (gzFile file);
+<li> int     <a href="#gzrewind">gzrewind</a> (gzFile file);
+<li> int  <a href="#gzeof">gzeof</a> (gzFile file);
+<li> int     <a href="#gzclose">gzclose</a> (gzFile file);
+<li> const char *  <a href="#gzerror">gzerror</a> (gzFile file, int *errnum);
+</ul>
+<h3> Function description </h3>
+<dl>
+<font color="Blue"><dt> int  <a name="compress">compress</a> (Bytef *dest,   uLongf *destLen, const Bytef *source, uLong sourceLen);</font>
+<dd>
+     Compresses the source buffer into the destination buffer.  sourceLen is
+   the byte length of the source buffer. Upon entry, destLen is the total
+   size of the destination buffer, which must be at least 0.1% larger than
+   sourceLen plus 12 bytes. Upon exit, destLen is the actual size of the
+   compressed buffer.<p>
+     This function can be used to <a href="#compress">compress</a> a whole file at once if the
+   input file is mmap'ed.<p>
+     <a href="#compress">compress</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not
+   enough memory, <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a> if there was not enough room in the output
+   buffer.<p>
+
+<font color="Blue"><dt> int  <a name="compress2">compress2</a> (Bytef *dest,   uLongf *destLen, const Bytef *source, uLong sourceLen, int level);</font>
+<dd>
+     Compresses the source buffer into the destination buffer. The level
+   parameter has the same meaning as in <a href="#deflateInit">deflateInit</a>.  sourceLen is the byte
+   length of the source buffer. Upon entry, destLen is the total size of the
+   destination buffer, which must be at least 0.1% larger than sourceLen plus
+   12 bytes. Upon exit, destLen is the actual size of the compressed buffer.
+   <p>
+
+     <a href="#compress2">compress2</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not enough
+   memory, <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a> if there was not enough room in the output buffer,
+   <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the level parameter is invalid.
+   <p>
+
+<font color="Blue"><dt> int  <a name="uncompress">uncompress</a> (Bytef *dest,   uLongf *destLen, const Bytef *source, uLong sourceLen);</font>
+<dd>
+     Decompresses the source buffer into the destination buffer.  sourceLen is
+   the byte length of the source buffer. Upon entry, destLen is the total
+   size of the destination buffer, which must be large enough to hold the
+   entire uncompressed data. (The size of the uncompressed data must have
+   been saved previously by the compressor and transmitted to the decompressor
+   by some mechanism outside the scope of this compression library.)
+   Upon exit, destLen is the actual size of the compressed buffer. <p>
+     This function can be used to decompress a whole file at once if the
+   input file is mmap'ed.
+   <p>
+
+     <a href="#uncompress">uncompress</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not
+   enough memory, <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a> if there was not enough room in the output
+   buffer, or <a href="#Z_DATA_ERROR">Z_DATA_ERROR</a> if the input data was corrupted.
+   <p>
+
+<dt> typedef voidp gzFile;
+<dd> <p>
+
+<font color="Blue"><dt>  gzFile  <a name="gzopen">gzopen</a>  (const char *path, const char *mode);</font>
+<dd>
+     Opens a gzip (.gz) file for reading or writing. The mode parameter
+   is as in fopen ("rb" or "wb") but can also include a compression level
+   ("wb9") or a strategy: 'f' for filtered data as in "wb6f", 'h' for
+   Huffman only compression as in "wb1h". (See the description
+   of <a href="#deflateInit2">deflateInit2</a> for more information about the strategy parameter.)
+   <p>
+
+     <a href="#gzopen">gzopen</a> can be used to read a file which is not in gzip format ; in this
+   case <a href="#gzread">gzread</a> will directly read from the file without decompression.
+   <p>
+
+     <a href="#gzopen">gzopen</a> returns NULL if the file could not be opened or if there was
+   insufficient memory to allocate the (de)compression <a href="#state">state</a> ; errno
+   can be checked to distinguish the two cases (if errno is zero, the
+   zlib error is <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a>).
+   <p>
+
+<font color="Blue"><dt> gzFile  <a name="gzdopen">gzdopen</a>  (int fd, const char *mode);</font>
+<dd>
+     <a href="#gzdopen">gzdopen</a>() associates a gzFile with the file descriptor fd.  File
+   descriptors are obtained from calls like open, dup, creat, pipe or
+   fileno (in the file has been previously opened with fopen).
+   The mode parameter is as in <a href="#gzopen">gzopen</a>.
+   <p>
+     The next call of <a href="#gzclose">gzclose</a> on the returned gzFile will also close the
+   file descriptor fd, just like fclose(fdopen(fd), mode) closes the file
+   descriptor fd. If you want to keep fd open, use <a href="#gzdopen">gzdopen</a>(dup(fd), mode).
+   <p>
+     <a href="#gzdopen">gzdopen</a> returns NULL if there was insufficient memory to allocate
+   the (de)compression <a href="#state">state</a>.
+   <p>
+
+<font color="Blue"><dt> int  <a name="gzsetparams">gzsetparams</a> (gzFile file, int level, int strategy);</font>
+<dd>
+     Dynamically update the compression level or strategy. See the description
+   of <a href="#deflateInit2">deflateInit2</a> for the meaning of these parameters.
+   <p>
+     <a href="#gzsetparams">gzsetparams</a> returns <a href="#Z_OK">Z_OK</a> if success, or <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the file was not
+   opened for writing.
+   <p>
+
+<font color="Blue"><dt> int     <a name="gzread">gzread</a>  (gzFile file, voidp buf, unsigned len);</font>
+<dd>
+     Reads the given number of uncompressed bytes from the compressed file.
+   If the input file was not in gzip format, <a href="#gzread">gzread</a> copies the given number
+   of bytes into the buffer.
+   <p>
+     <a href="#gzread">gzread</a> returns the number of uncompressed bytes actually read (0 for
+   end of file, -1 for error).
+   <p>
+
+<font color="Blue"><dt> int     <a name="gzwrite">gzwrite</a> (gzFile file, const voidp buf, unsigned len);</font>
+<dd>
+     Writes the given number of uncompressed bytes into the compressed file.
+   <a href="#gzwrite">gzwrite</a> returns the number of uncompressed bytes actually written
+   (0 in case of error).
+   <p>
+
+<font color="Blue"><dt> int VA   <a name="gzprintf">gzprintf</a> (gzFile file, const char *format, ...);</font>
+<dd>
+     Converts, formats, and writes the args to the compressed file under
+   control of the format string, as in fprintf. <a href="#gzprintf">gzprintf</a> returns the number of
+   uncompressed bytes actually written (0 in case of error).
+   <p>
+
+<font color="Blue"><dt> int  <a name="gzputs">gzputs</a> (gzFile file, const char *s);</font>
+<dd>
+      Writes the given null-terminated string to the compressed file, excluding
+   the terminating null character.
+   <p>
+      <a href="#gzputs">gzputs</a> returns the number of characters written, or -1 in case of error.
+      <p>
+
+<font color="Blue"><dt> char *  <a name="gzgets">gzgets</a> (gzFile file, char *buf, int len);</font>
+<dd>
+      Reads bytes from the compressed file until len-1 characters are read, or
+   a newline character is read and transferred to buf, or an end-of-file
+   condition is encountered.  The string is then terminated with a null
+   character.
+   <p>
+      <a href="#gzgets">gzgets</a> returns buf, or <a href="#Z_NULL">Z_NULL</a> in case of error.
+      <p>
+
+<font color="Blue"><dt> int     <a name="gzputc">gzputc</a> (gzFile file, int c);</font>
+<dd>
+      Writes c, converted to an unsigned char, into the compressed file.
+   <a href="#gzputc">gzputc</a> returns the value that was written, or -1 in case of error.
+   <p>
+
+<font color="Blue"><dt> int     <a name="gzgetc">gzgetc</a> (gzFile file);</font>
+<dd>
+      Reads one byte from the compressed file. <a href="#gzgetc">gzgetc</a> returns this byte
+   or -1 in case of end of file or error.
+   <p>
+
+<font color="Blue"><dt> int     <a name="gzflush">gzflush</a> (gzFile file, int flush);</font>
+<dd>
+     Flushes all pending output into the compressed file. The parameter
+   flush is as in the <a href="#deflate">deflate</a>() function. The return value is the zlib
+   error number (see function <a href="#gzerror">gzerror</a> below). <a href="#gzflush">gzflush</a> returns <a href="#Z_OK">Z_OK</a> if
+   the flush parameter is <a href="#Z_FINISH">Z_FINISH</a> and all output could be flushed.
+   <p>
+     <a href="#gzflush">gzflush</a> should be called only when strictly necessary because it can
+   degrade compression.
+   <p>
+
+<font color="Blue"><dt> z_off_t     <a name="gzseek">gzseek</a> (gzFile file, z_off_t offset, int whence);</font>
+<dd>
+      Sets the starting position for the next <a href="#gzread">gzread</a> or <a href="#gzwrite">gzwrite</a> on the
+   given compressed file. The offset represents a number of bytes in the
+   uncompressed data stream. The whence parameter is defined as in lseek(2);
+   the value SEEK_END is not supported.
+   <p>
+     If the file is opened for reading, this function is emulated but can be
+   extremely slow. If the file is opened for writing, only forward seeks are
+   supported ; <a href="#gzseek">gzseek</a> then compresses a sequence of zeroes up to the new
+   starting position.
+   <p>
+      <a href="#gzseek">gzseek</a> returns the resulting offset location as measured in bytes from
+   the beginning of the uncompressed stream, or -1 in case of error, in
+   particular if the file is opened for writing and the new starting position
+   would be before the current position.
+   <p>
+
+<font color="Blue"><dt> int     <a name="gzrewind">gzrewind</a> (gzFile file);</font>
+<dd>
+     Rewinds the given file. This function is supported only for reading.
+     <p>
+   <a href="#gzrewind">gzrewind</a>(file) is equivalent to (int)<a href="#gzseek">gzseek</a>(file, 0L, SEEK_SET)
+   <p>
+
+<font color="Blue"><dt> z_off_t     <a name="gztell">gztell</a> (gzFile file);</font>
+<dd>
+     Returns the starting position for the next <a href="#gzread">gzread</a> or <a href="#gzwrite">gzwrite</a> on the
+   given compressed file. This position represents a number of bytes in the
+   uncompressed data stream.
+   <p>
+
+   <a href="#gztell">gztell</a>(file) is equivalent to <a href="#gzseek">gzseek</a>(file, 0L, SEEK_CUR)
+   <p>
+
+<font color="Blue"><dt> int  <a name="gzeof">gzeof</a> (gzFile file);</font>
+<dd>
+     Returns 1 when EOF has previously been detected reading the given
+   input stream, otherwise zero.
+   <p>
+
+<font color="Blue"><dt> int     <a name="gzclose">gzclose</a> (gzFile file);</font>
+<dd>
+     Flushes all pending output if necessary, closes the compressed file
+   and deallocates all the (de)compression <a href="#state">state</a>. The return value is the zlib
+   error number (see function <a href="#gzerror">gzerror</a> below).
+   <p>
+
+<font color="Blue"><dt> const char *  <a name="gzerror">gzerror</a> (gzFile file, int *errnum);</font>
+<dd>
+     Returns the error message for the last error which occurred on the
+   given compressed file. errnum is set to zlib error number. If an
+   error occurred in the file system and not in the compression library,
+   errnum is set to <a href="#Z_ERRNO">Z_ERRNO</a> and the application may consult errno
+   to get the exact error code.
+   <p>
+</dl>
+<hr>
+<a name="Basic functions"><h2> Basic functions </h2>
+<h3> Function list </h3>
+<ul>
+<li>  const char *  <a href="#zlibVersion">zlibVersion</a> (void);
+<li>  int  <a href="#deflateInit">deflateInit</a> (<a href="#z_streamp">z_streamp</a> strm, int level);
+<li>  int  <a href="#deflate">deflate</a> (<a href="#z_streamp">z_streamp</a> strm, int flush);
+<li>  int  <a href="#deflateEnd">deflateEnd</a> (<a href="#z_streamp">z_streamp</a> strm);
+<li>  int  <a href="#inflateInit">inflateInit</a> (<a href="#z_streamp">z_streamp</a> strm);
+<li>  int  <a href="#inflate">inflate</a> (<a href="#z_streamp">z_streamp</a> strm, int flush);
+<li>  int  <a href="#inflateEnd">inflateEnd</a> (<a href="#z_streamp">z_streamp</a> strm);
+</ul>
+
+<h3> Function description </h3>
+<dl>
+<font color="Blue"><dt>  const char *  <a name="zlibVersion">zlibVersion</a> (void);</font>
+<dd> The application can compare <a href="#zlibVersion">zlibVersion</a> and ZLIB_VERSION for consistency.
+   If the first character differs, the library code actually used is
+   not compatible with the zlib.h header file used by the application.
+   This check is automatically made by <a href="#deflateInit">deflateInit</a> and <a href="#inflateInit">inflateInit</a>.
+   <p>
+
+<font color="Blue"><dt> int  <a name="deflateInit">deflateInit</a> (<a href="#z_streamp">z_streamp</a> strm, int level);</font>
+<dd>
+     Initializes the internal stream <a href="#state">state</a> for compression. The fields
+   <a href="#zalloc">zalloc</a>, <a href="#zfree">zfree</a> and <a href="#opaque">opaque</a> must be initialized before by the caller.
+   If <a href="#zalloc">zalloc</a> and <a href="#zfree">zfree</a> are set to <a href="#Z_NULL">Z_NULL</a>, <a href="#deflateInit">deflateInit</a> updates them to
+   use default allocation functions.
+   <p>
+
+     The compression level must be <a href="#Z_DEFAULT_COMPRESSION">Z_DEFAULT_COMPRESSION</a>, or between 0 and 9:
+   1 gives best speed, 9 gives best compression, 0 gives no compression at
+   all (the input data is simply copied a block at a time).
+   <p>
+
+   <a href="#Z_DEFAULT_COMPRESSION">Z_DEFAULT_COMPRESSION</a> requests a default compromise between speed and
+   compression (currently equivalent to level 6).
+   <p>
+
+     <a href="#deflateInit">deflateInit</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not
+   enough memory, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if level is not a valid compression level,
+   <a href="#Z_VERSION_ERROR">Z_VERSION_ERROR</a> if the zlib library version (<a href="#zlib_version">zlib_version</a>) is incompatible
+   with the version assumed by the caller (ZLIB_VERSION).
+   <a href="#msg">msg</a> is set to null if there is no error message.  <a href="#deflateInit">deflateInit</a> does not
+   perform any compression: this will be done by <a href="#deflate">deflate</a>().
+   <p>
+
+<font color="Blue"><dt>  int  <a name="deflate">deflate</a> (<a href="#z_streamp">z_streamp</a> strm, int flush);</font>
+<dd>
+    <a href="#deflate">deflate</a> compresses as much data as possible, and stops when the input
+  buffer becomes empty or the output buffer becomes full. It may introduce some
+  output latency (reading input without producing any output) except when
+  forced to flush.<p>
+
+    The detailed semantics are as follows. <a href="#deflate">deflate</a> performs one or both of the
+  following actions:
+
+  <ul>
+  <li> Compress more input starting at <a href="#next_in">next_in</a> and update <a href="#next_in">next_in</a> and <a href="#avail_in">avail_in</a>
+    accordingly. If not all input can be processed (because there is not
+    enough room in the output buffer), <a href="#next_in">next_in</a> and <a href="#avail_in">avail_in</a> are updated and
+    processing will resume at this point for the next call of <a href="#deflate">deflate</a>().
+
+  <li>
+    Provide more output starting at <a href="#next_out">next_out</a> and update <a href="#next_out">next_out</a> and <a href="#avail_out">avail_out</a>
+    accordingly. This action is forced if the parameter flush is non zero.
+    Forcing flush frequently degrades the compression ratio, so this parameter
+    should be set only when necessary (in interactive applications).
+    Some output may be provided even if flush is not set.
+  </ul> <p>
+
+  Before the call of <a href="#deflate">deflate</a>(), the application should ensure that at least
+  one of the actions is possible, by providing more input and/or consuming
+  more output, and updating <a href="#avail_in">avail_in</a> or <a href="#avail_out">avail_out</a> accordingly ; <a href="#avail_out">avail_out</a>
+  should never be zero before the call. The application can consume the
+  compressed output when it wants, for example when the output buffer is full
+  (<a href="#avail_out">avail_out</a> == 0), or after each call of <a href="#deflate">deflate</a>(). If <a href="#deflate">deflate</a> returns <a href="#Z_OK">Z_OK</a>
+  and with zero <a href="#avail_out">avail_out</a>, it must be called again after making room in the
+  output buffer because there might be more output pending.
+  <p>
+
+    If the parameter flush is set to <a href="#Z_SYNC_FLUSH">Z_SYNC_FLUSH</a>, all pending output is
+  flushed to the output buffer and the output is aligned on a byte boundary, so
+  that the decompressor can get all input data available so far. (In particular
+  <a href="#avail_in">avail_in</a> is zero after the call if enough output space has been provided
+  before the call.)  Flushing may degrade compression for some compression
+  algorithms and so it should be used only when necessary.
+  <p>
+
+    If flush is set to <a href="#Z_FULL_FLUSH">Z_FULL_FLUSH</a>, all output is flushed as with
+  <a href="#Z_SYNC_FLUSH">Z_SYNC_FLUSH</a>, and the compression <a href="#state">state</a> is reset so that decompression can
+  restart from this point if previous compressed data has been damaged or if
+  random access is desired. Using <a href="#Z_FULL_FLUSH">Z_FULL_FLUSH</a> too often can seriously degrade
+  the compression.
+  <p>
+
+    If <a href="#deflate">deflate</a> returns with <a href="#avail_out">avail_out</a> == 0, this function must be called again
+  with the same value of the flush parameter and more output space (updated
+  <a href="#avail_out">avail_out</a>), until the flush is complete (<a href="#deflate">deflate</a> returns with non-zero
+  <a href="#avail_out">avail_out</a>).
+  <p>
+
+    If the parameter flush is set to <a href="#Z_FINISH">Z_FINISH</a>, pending input is processed,
+  pending output is flushed and <a href="#deflate">deflate</a> returns with <a href="#Z_STREAM_END">Z_STREAM_END</a> if there
+  was enough output space ; if <a href="#deflate">deflate</a> returns with <a href="#Z_OK">Z_OK</a>, this function must be
+  called again with <a href="#Z_FINISH">Z_FINISH</a> and more output space (updated <a href="#avail_out">avail_out</a>) but no
+  more input data, until it returns with <a href="#Z_STREAM_END">Z_STREAM_END</a> or an error. After
+  <a href="#deflate">deflate</a> has returned <a href="#Z_STREAM_END">Z_STREAM_END</a>, the only possible operations on the
+  stream are <a href="#deflateReset">deflateReset</a> or <a href="#deflateEnd">deflateEnd</a>.
+  <p>
+
+    <a href="#Z_FINISH">Z_FINISH</a> can be used immediately after <a href="#deflateInit">deflateInit</a> if all the compression
+  is to be done in a single step. In this case, <a href="#avail_out">avail_out</a> must be at least
+  0.1% larger than <a href="#avail_in">avail_in</a> plus 12 bytes.  If <a href="#deflate">deflate</a> does not return
+  <a href="#Z_STREAM_END">Z_STREAM_END</a>, then it must be called again as described above.
+  <p>
+
+    <a href="#deflate">deflate</a>() sets strm-&gt <a href="#adler">adler</a> to the <a href="#adler32">adler32</a> checksum of all input read
+  so far (that is, <a href="#total_in">total_in</a> bytes).
+  <p>
+
+    <a href="#deflate">deflate</a>() may update <a href="#data_type">data_type</a> if it can make a good guess about
+  the input data type (<a href="#Z_ASCII">Z_ASCII</a> or <a href="#Z_BINARY">Z_BINARY</a>). In doubt, the data is considered
+  binary. This field is only for information purposes and does not affect
+  the compression algorithm in any manner.
+  <p>
+
+    <a href="#deflate">deflate</a>() returns <a href="#Z_OK">Z_OK</a> if some progress has been made (more input
+  processed or more output produced), <a href="#Z_STREAM_END">Z_STREAM_END</a> if all input has been
+  consumed and all output has been produced (only when flush is set to
+  <a href="#Z_FINISH">Z_FINISH</a>), <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the stream <a href="#state">state</a> was inconsistent (for example
+  if <a href="#next_in">next_in</a> or <a href="#next_out">next_out</a> was NULL), <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a> if no progress is possible
+  (for example <a href="#avail_in">avail_in</a> or <a href="#avail_out">avail_out</a> was zero).
+  <p>
+
+<font color="Blue"><dt>  int  <a name="deflateEnd">deflateEnd</a> (<a href="#z_streamp">z_streamp</a> strm);</font>
+<dd>
+     All dynamically allocated data structures for this stream are freed.
+   This function discards any unprocessed input and does not flush any
+   pending output.
+   <p>
+
+     <a href="#deflateEnd">deflateEnd</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the
+   stream <a href="#state">state</a> was inconsistent, <a href="#Z_DATA_ERROR">Z_DATA_ERROR</a> if the stream was freed
+   prematurely (some input or output was discarded). In the error case,
+   <a href="#msg">msg</a> may be set but then points to a static string (which must not be
+   deallocated).
+   <p>
+
+<font color="Blue"><dt>  int  <a name="inflateInit">inflateInit</a> (<a href="#z_streamp">z_streamp</a> strm);</font>
+<dd>
+	Initializes the internal stream <a href="#state">state</a> for decompression. The fields
+   <a href="#next_in">next_in</a>, <a href="#avail_in">avail_in</a>, <a href="#zalloc">zalloc</a>, <a href="#zfree">zfree</a> and <a href="#opaque">opaque</a> must be initialized before by
+   the caller. If <a href="#next_in">next_in</a> is not <a href="#Z_NULL">Z_NULL</a> and <a href="#avail_in">avail_in</a> is large enough (the exact
+   value depends on the compression method), <a href="#inflateInit">inflateInit</a> determines the
+   compression method from the zlib header and allocates all data structures
+   accordingly ; otherwise the allocation will be deferred to the first call of
+   <a href="#inflate">inflate</a>.  If <a href="#zalloc">zalloc</a> and <a href="#zfree">zfree</a> are set to <a href="#Z_NULL">Z_NULL</a>, <a href="#inflateInit">inflateInit</a> updates them to
+   use default allocation functions.
+   <p>
+
+     <a href="#inflateInit">inflateInit</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not enough
+   memory, <a href="#Z_VERSION_ERROR">Z_VERSION_ERROR</a> if the zlib library version is incompatible with the
+   version assumed by the caller.  <a href="#msg">msg</a> is set to null if there is no error
+   message. <a href="#inflateInit">inflateInit</a> does not perform any decompression apart from reading
+   the zlib header if present: this will be done by <a href="#inflate">inflate</a>().  (So <a href="#next_in">next_in</a> and
+   <a href="#avail_in">avail_in</a> may be modified, but <a href="#next_out">next_out</a> and <a href="#avail_out">avail_out</a> are unchanged.)
+   <p>
+
+<font color="Blue"><dt>  int  <a name="inflate">inflate</a> (<a href="#z_streamp">z_streamp</a> strm, int flush);</font>
+<dd>
+    <a href="#inflate">inflate</a> decompresses as much data as possible, and stops when the input
+  buffer becomes empty or the output buffer becomes full. It may some
+  introduce some output latency (reading input without producing any output)
+  except when forced to flush.
+  <p>
+
+  The detailed semantics are as follows. <a href="#inflate">inflate</a> performs one or both of the
+  following actions:
+
+  <ul>
+  <li> Decompress more input starting at <a href="#next_in">next_in</a> and update <a href="#next_in">next_in</a> and <a href="#avail_in">avail_in</a>
+    accordingly. If not all input can be processed (because there is not
+    enough room in the output buffer), <a href="#next_in">next_in</a> is updated and processing
+    will resume at this point for the next call of <a href="#inflate">inflate</a>().
+
+  <li> Provide more output starting at <a href="#next_out">next_out</a> and update <a href="#next_out">next_out</a> and
+    <a href="#avail_out">avail_out</a> accordingly.  <a href="#inflate">inflate</a>() provides as much output as possible,
+    until there is no more input data or no more space in the output buffer
+    (see below about the flush parameter).
+  </ul> <p>
+
+  Before the call of <a href="#inflate">inflate</a>(), the application should ensure that at least
+  one of the actions is possible, by providing more input and/or consuming
+  more output, and updating the next_* and avail_* values accordingly.
+  The application can consume the uncompressed output when it wants, for
+  example when the output buffer is full (<a href="#avail_out">avail_out</a> == 0), or after each
+  call of <a href="#inflate">inflate</a>(). If <a href="#inflate">inflate</a> returns <a href="#Z_OK">Z_OK</a> and with zero <a href="#avail_out">avail_out</a>, it
+  must be called again after making room in the output buffer because there
+  might be more output pending.
+  <p>
+
+    If the parameter flush is set to <a href="#Z_SYNC_FLUSH">Z_SYNC_FLUSH</a>, <a href="#inflate">inflate</a> flushes as much
+  output as possible to the output buffer. The flushing behavior of <a href="#inflate">inflate</a> is
+  not specified for values of the flush parameter other than <a href="#Z_SYNC_FLUSH">Z_SYNC_FLUSH</a>
+  and <a href="#Z_FINISH">Z_FINISH</a>, but the current implementation actually flushes as much output
+  as possible anyway.
+  <p>
+
+    <a href="#inflate">inflate</a>() should normally be called until it returns <a href="#Z_STREAM_END">Z_STREAM_END</a> or an
+  error. However if all decompression is to be performed in a single step
+  (a single call of <a href="#inflate">inflate</a>), the parameter flush should be set to
+  <a href="#Z_FINISH">Z_FINISH</a>. In this case all pending input is processed and all pending
+  output is flushed ; <a href="#avail_out">avail_out</a> must be large enough to hold all the
+  uncompressed data. (The size of the uncompressed data may have been saved
+  by the compressor for this purpose.) The next operation on this stream must
+  be <a href="#inflateEnd">inflateEnd</a> to deallocate the decompression <a href="#state">state</a>. The use of <a href="#Z_FINISH">Z_FINISH</a>
+  is never required, but can be used to inform <a href="#inflate">inflate</a> that a faster routine
+  may be used for the single <a href="#inflate">inflate</a>() call.
+  <p>
+
+     If a preset dictionary is needed at this point (see <a href="#inflateSetDictionary">inflateSetDictionary</a>
+  below), <a href="#inflate">inflate</a> sets strm-<a href="#adler">adler</a> to the <a href="#adler32">adler32</a> checksum of the
+  dictionary chosen by the compressor and returns <a href="#Z_NEED_DICT">Z_NEED_DICT</a> ; otherwise
+  it sets strm-&gt <a href="#adler">adler</a> to the <a href="#adler32">adler32</a> checksum of all output produced
+  so far (that is, <a href="#total_out">total_out</a> bytes) and returns <a href="#Z_OK">Z_OK</a>, <a href="#Z_STREAM_END">Z_STREAM_END</a> or
+  an error code as described below. At the end of the stream, <a href="#inflate">inflate</a>()
+  checks that its computed <a href="#adler32">adler32</a> checksum is equal to that saved by the
+  compressor and returns <a href="#Z_STREAM_END">Z_STREAM_END</a> only if the checksum is correct.
+  <p>
+
+    <a href="#inflate">inflate</a>() returns <a href="#Z_OK">Z_OK</a> if some progress has been made (more input processed
+  or more output produced), <a href="#Z_STREAM_END">Z_STREAM_END</a> if the end of the compressed data has
+  been reached and all uncompressed output has been produced, <a href="#Z_NEED_DICT">Z_NEED_DICT</a> if a
+  preset dictionary is needed at this point, <a href="#Z_DATA_ERROR">Z_DATA_ERROR</a> if the input data was
+  corrupted (input stream not conforming to the zlib format or incorrect
+  <a href="#adler32">adler32</a> checksum), <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the stream structure was inconsistent
+  (for example if <a href="#next_in">next_in</a> or <a href="#next_out">next_out</a> was NULL), <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not
+  enough memory, <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a> if no progress is possible or if there was not
+  enough room in the output buffer when <a href="#Z_FINISH">Z_FINISH</a> is used. In the <a href="#Z_DATA_ERROR">Z_DATA_ERROR</a>
+  case, the application may then call <a href="#inflateSync">inflateSync</a> to look for a good
+  compression block.
+  <p>
+
+<font color="Blue"><dt>  int  <a name="inflateEnd">inflateEnd</a> (<a href="#z_streamp">z_streamp</a> strm);</font>
+<dd>
+     All dynamically allocated data structures for this stream are freed.
+   This function discards any unprocessed input and does not flush any
+   pending output.
+   <p>
+
+     <a href="#inflateEnd">inflateEnd</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the stream <a href="#state">state</a>
+   was inconsistent. In the error case, <a href="#msg">msg</a> may be set but then points to a
+   static string (which must not be deallocated).
+</dl>
+<hr>
+<a name="Advanced functions"><h2> Advanced functions </h2>
+    The following functions are needed only in some special applications.
+<h3> Function list </h3>
+<ul>
+<li>  int  <a href="#deflateInit2">deflateInit2</a> (<a href="#z_streamp">z_streamp</a> strm,
+<li> int  <a href="#deflateSetDictionary">deflateSetDictionary</a> (<a href="#z_streamp">z_streamp</a> strm, const Bytef *dictionary, uInt  dictLength);
+<li> int  <a href="#deflateCopy">deflateCopy</a> (<a href="#z_streamp">z_streamp</a> dest, <a href="#z_streamp">z_streamp</a> source);
+<li> int  <a href="#deflateReset">deflateReset</a> (<a href="#z_streamp">z_streamp</a> strm);
+<li> int  <a href="#deflateParams">deflateParams</a> (<a href="#z_streamp">z_streamp</a> strm, int level, int strategy);
+<li> int  <a href="#inflateInit2">inflateInit2</a> (<a href="#z_streamp">z_streamp</a> strm, int  windowBits);
+<li>  int  <a href="#inflateSetDictionary">inflateSetDictionary</a> (<a href="#z_streamp">z_streamp</a> strm, const Bytef *dictionary, uInt  dictLength);
+<li> int  <a href="#inflateSync">inflateSync</a> (<a href="#z_streamp">z_streamp</a> strm);
+<li> int  <a href="#inflateReset">inflateReset</a> (<a href="#z_streamp">z_streamp</a> strm);
+
+</ul>
+<h3> Function description </h3>
+<dl>
+<font color="Blue"><dt>  int  <a name="deflateInit2">deflateInit2</a> (<a href="#z_streamp">z_streamp</a> strm, int  level, int  method, int  windowBits, int  memLevel, int  strategy);</font>
+
+<dd> This is another version of <a href="#deflateInit">deflateInit</a> with more compression options. The
+   fields <a href="#next_in">next_in</a>, <a href="#zalloc">zalloc</a>, <a href="#zfree">zfree</a> and <a href="#opaque">opaque</a> must be initialized before by
+   the caller.<p>
+
+     The method parameter is the compression method. It must be <a href="#Z_DEFLATED">Z_DEFLATED</a> in
+   this version of the library.<p>
+
+     The windowBits parameter is the base two logarithm of the window size
+   (the size of the history buffer).  It should be in the range 8..15 for this
+   version of the library. Larger values of this parameter result in better
+   compression at the expense of memory usage. The default value is 15 if
+   <a href="#deflateInit">deflateInit</a> is used instead.<p>
+
+     The memLevel parameter specifies how much memory should be allocated
+   for the internal compression <a href="#state">state</a>. memLevel=1 uses minimum memory but
+   is slow and reduces compression ratio ; memLevel=9 uses maximum memory
+   for optimal speed. The default value is 8. See zconf.h for total memory
+   usage as a function of windowBits and memLevel.<p>
+
+     The strategy parameter is used to tune the compression algorithm. Use the
+   value <a href="#Z_DEFAULT_STRATEGY">Z_DEFAULT_STRATEGY</a> for normal data, <a href="#Z_FILTERED">Z_FILTERED</a> for data produced by a
+   filter (or predictor), or <a href="#Z_HUFFMAN_ONLY">Z_HUFFMAN_ONLY</a> to force Huffman encoding only (no
+   string match).  Filtered data consists mostly of small values with a
+   somewhat random distribution. In this case, the compression algorithm is
+   tuned to <a href="#compress">compress</a> them better. The effect of <a href="#Z_FILTERED">Z_FILTERED</a> is to force more
+   Huffman coding and less string matching ; it is somewhat intermediate
+   between Z_DEFAULT and <a href="#Z_HUFFMAN_ONLY">Z_HUFFMAN_ONLY</a>. The strategy parameter only affects
+   the compression ratio but not the correctness of the compressed output even
+   if it is not set appropriately.<p>
+
+      <a href="#deflateInit2">deflateInit2</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not enough
+   memory, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if a parameter is invalid (such as an invalid
+   method). <a href="#msg">msg</a> is set to null if there is no error message.  <a href="#deflateInit2">deflateInit2</a> does
+   not perform any compression: this will be done by <a href="#deflate">deflate</a>().<p>
+
+<font color="Blue"><dt> int  <a name="deflateSetDictionary">deflateSetDictionary</a> (<a href="#z_streamp">z_streamp</a> strm, const Bytef *dictionary, uInt  dictLength);</font>
+<dd>
+     Initializes the compression dictionary from the given byte sequence
+   without producing any compressed output. This function must be called
+   immediately after <a href="#deflateInit">deflateInit</a>, <a href="#deflateInit2">deflateInit2</a> or <a href="#deflateReset">deflateReset</a>, before any
+   call of <a href="#deflate">deflate</a>. The compressor and decompressor must use exactly the same
+   dictionary (see <a href="#inflateSetDictionary">inflateSetDictionary</a>).<p>
+
+     The dictionary should consist of strings (byte sequences) that are likely
+   to be encountered later in the data to be compressed, with the most commonly
+   used strings preferably put towards the end of the dictionary. Using a
+   dictionary is most useful when the data to be compressed is short and can be
+   predicted with good accuracy ; the data can then be compressed better than
+   with the default empty dictionary.<p>
+
+     Depending on the size of the compression data structures selected by
+   <a href="#deflateInit">deflateInit</a> or <a href="#deflateInit2">deflateInit2</a>, a part of the dictionary may in effect be
+   discarded, for example if the dictionary is larger than the window size in
+   <a href="#deflate">deflate</a> or deflate2. Thus the strings most likely to be useful should be
+   put at the end of the dictionary, not at the front.<p>
+
+     Upon return of this function, strm-&gt <a href="#adler">adler</a> is set to the Adler32 value
+   of the dictionary ; the decompressor may later use this value to determine
+   which dictionary has been used by the compressor. (The Adler32 value
+   applies to the whole dictionary even if only a subset of the dictionary is
+   actually used by the compressor.)<p>
+
+     <a href="#deflateSetDictionary">deflateSetDictionary</a> returns <a href="#Z_OK">Z_OK</a> if success, or <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if a
+   parameter is invalid (such as NULL dictionary) or the stream <a href="#state">state</a> is
+   inconsistent (for example if <a href="#deflate">deflate</a> has already been called for this stream
+   or if the compression method is bsort). <a href="#deflateSetDictionary">deflateSetDictionary</a> does not
+   perform any compression: this will be done by <a href="#deflate">deflate</a>().<p>
+
+<font color="Blue"><dt> int  <a name="deflateCopy">deflateCopy</a> (<a href="#z_streamp">z_streamp</a> dest, <a href="#z_streamp">z_streamp</a> source);</font>
+<dd>
+     Sets the destination stream as a complete copy of the source stream.<p>
+
+     This function can be useful when several compression strategies will be
+   tried, for example when there are several ways of pre-processing the input
+   data with a filter. The streams that will be discarded should then be freed
+   by calling <a href="#deflateEnd">deflateEnd</a>.  Note that <a href="#deflateCopy">deflateCopy</a> duplicates the internal
+   compression <a href="#state">state</a> which can be quite large, so this strategy is slow and
+   can consume lots of memory.<p>
+
+     <a href="#deflateCopy">deflateCopy</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not
+   enough memory, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the source stream <a href="#state">state</a> was inconsistent
+   (such as <a href="#zalloc">zalloc</a> being NULL). <a href="#msg">msg</a> is left unchanged in both source and
+   destination.<p>
+
+<font color="Blue"><dt> int  <a name="deflateReset">deflateReset</a> (<a href="#z_streamp">z_streamp</a> strm);</font>
+<dd>     This function is equivalent to <a href="#deflateEnd">deflateEnd</a> followed by <a href="#deflateInit">deflateInit</a>,
+   but does not free and reallocate all the internal compression <a href="#state">state</a>.
+   The stream will keep the same compression level and any other attributes
+   that may have been set by <a href="#deflateInit2">deflateInit2</a>.<p>
+
+      <a href="#deflateReset">deflateReset</a> returns <a href="#Z_OK">Z_OK</a> if success, or <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the source
+   stream <a href="#state">state</a> was inconsistent (such as <a href="#zalloc">zalloc</a> or <a href="#state">state</a> being NULL).<p>
+
+<font color="Blue"><dt> int  <a name="deflateParams">deflateParams</a> (<a href="#z_streamp">z_streamp</a> strm, int level, int strategy);</font>
+<dd>
+     Dynamically update the compression level and compression strategy.  The
+   interpretation of level and strategy is as in <a href="#deflateInit2">deflateInit2</a>.  This can be
+   used to switch between compression and straight copy of the input data, or
+   to switch to a different kind of input data requiring a different
+   strategy. If the compression level is changed, the input available so far
+   is compressed with the old level (and may be flushed); the new level will
+   take effect only at the next call of <a href="#deflate">deflate</a>().<p>
+
+     Before the call of <a href="#deflateParams">deflateParams</a>, the stream <a href="#state">state</a> must be set as for
+   a call of <a href="#deflate">deflate</a>(), since the currently available input may have to
+   be compressed and flushed. In particular, strm-&gt <a href="#avail_out">avail_out</a> must be
+   non-zero.<p>
+
+     <a href="#deflateParams">deflateParams</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the source
+   stream <a href="#state">state</a> was inconsistent or if a parameter was invalid, <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a>
+   if strm-&gtavail_out was zero.<p>
+
+<font color="Blue"><dt> int  <a name="inflateInit2">inflateInit2</a> (<a href="#z_streamp">z_streamp</a> strm, int  windowBits);</font>
+
+<dd>     This is another version of <a href="#inflateInit">inflateInit</a> with an extra parameter. The
+   fields <a href="#next_in">next_in</a>, <a href="#avail_in">avail_in</a>, <a href="#zalloc">zalloc</a>, <a href="#zfree">zfree</a> and <a href="#opaque">opaque</a> must be initialized
+   before by the caller.<p>
+
+     The windowBits parameter is the base two logarithm of the maximum window
+   size (the size of the history buffer).  It should be in the range 8..15 for
+   this version of the library. The default value is 15 if <a href="#inflateInit">inflateInit</a> is used
+   instead. If a compressed stream with a larger window size is given as
+   input, <a href="#inflate">inflate</a>() will return with the error code <a href="#Z_DATA_ERROR">Z_DATA_ERROR</a> instead of
+   trying to allocate a larger window.<p>
+
+      <a href="#inflateInit2">inflateInit2</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not enough
+   memory, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if a parameter is invalid (such as a negative
+   memLevel). <a href="#msg">msg</a> is set to null if there is no error message.  <a href="#inflateInit2">inflateInit2</a>
+   does not perform any decompression apart from reading the zlib header if
+   present: this will be done by <a href="#inflate">inflate</a>(). (So <a href="#next_in">next_in</a> and <a href="#avail_in">avail_in</a> may be
+   modified, but <a href="#next_out">next_out</a> and <a href="#avail_out">avail_out</a> are unchanged.)<p>
+
+<font color="Blue"><dt>  int  <a name="inflateSetDictionary">inflateSetDictionary</a> (<a href="#z_streamp">z_streamp</a> strm, const Bytef *dictionary, uInt  dictLength);</font>
+<dd>
+     Initializes the decompression dictionary from the given uncompressed byte
+   sequence. This function must be called immediately after a call of <a href="#inflate">inflate</a>
+   if this call returned <a href="#Z_NEED_DICT">Z_NEED_DICT</a>. The dictionary chosen by the compressor
+   can be determined from the Adler32 value returned by this call of
+   <a href="#inflate">inflate</a>. The compressor and decompressor must use exactly the same
+   dictionary (see <a href="#deflateSetDictionary">deflateSetDictionary</a>).<p>
+
+     <a href="#inflateSetDictionary">inflateSetDictionary</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if a
+   parameter is invalid (such as NULL dictionary) or the stream <a href="#state">state</a> is
+   inconsistent, <a href="#Z_DATA_ERROR">Z_DATA_ERROR</a> if the given dictionary doesn't match the
+   expected one (incorrect Adler32 value). <a href="#inflateSetDictionary">inflateSetDictionary</a> does not
+   perform any decompression: this will be done by subsequent calls of
+   <a href="#inflate">inflate</a>().<p>
+
+<font color="Blue"><dt> int  <a name="inflateSync">inflateSync</a> (<a href="#z_streamp">z_streamp</a> strm);</font>
+
+<dd>    Skips invalid compressed data until a full flush point (see above the
+  description of <a href="#deflate">deflate</a> with <a href="#Z_FULL_FLUSH">Z_FULL_FLUSH</a>) can be found, or until all
+  available input is skipped. No output is provided.<p>
+
+    <a href="#inflateSync">inflateSync</a> returns <a href="#Z_OK">Z_OK</a> if a full flush point has been found, <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a>
+  if no more input was provided, <a href="#Z_DATA_ERROR">Z_DATA_ERROR</a> if no flush point has been found,
+  or <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the stream structure was inconsistent. In the success
+  case, the application may save the current current value of <a href="#total_in">total_in</a> which
+  indicates where valid compressed data was found. In the error case, the
+  application may repeatedly call <a href="#inflateSync">inflateSync</a>, providing more input each time,
+  until success or end of the input data.<p>
+
+<font color="Blue"><dt> int  <a name="inflateReset">inflateReset</a> (<a href="#z_streamp">z_streamp</a> strm);</font>
+<dd>
+     This function is equivalent to <a href="#inflateEnd">inflateEnd</a> followed by <a href="#inflateInit">inflateInit</a>,
+   but does not free and reallocate all the internal decompression <a href="#state">state</a>.
+   The stream will keep attributes that may have been set by <a href="#inflateInit2">inflateInit2</a>.
+   <p>
+
+      <a href="#inflateReset">inflateReset</a> returns <a href="#Z_OK">Z_OK</a> if success, or <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the source
+   stream <a href="#state">state</a> was inconsistent (such as <a href="#zalloc">zalloc</a> or <a href="#state">state</a> being NULL).
+   <p>
+</dl>
+
+<hr>
+<a name="Checksum functions"><h2> Checksum functions </h2>
+     These functions are not related to compression but are exported
+   anyway because they might be useful in applications using the
+   compression library.
+<h3> Function list </h3>
+<ul>
+<li> uLong  <a href="#adler32">adler32</a> (uLong <a href="#adler">adler</a>, const Bytef *buf, uInt len);
+<li> uLong  <a href="#crc32">crc32</a>   (uLong crc, const Bytef *buf, uInt len);
+</ul>
+<h3> Function description </h3>
+<dl>
+<font color="Blue"><dt> uLong  <a name="adler32">adler32</a> (uLong <a href="#adler">adler</a>, const Bytef *buf, uInt len);</font>
+<dd>
+     Update a running Adler-32 checksum with the bytes buf[0..len-1] and
+   return the updated checksum. If buf is NULL, this function returns
+   the required initial value for the checksum.
+   <p>
+   An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
+   much faster. Usage example:
+   <pre>
+
+     uLong <a href="#adler">adler</a> = <a href="#adler32">adler32</a>(0L, <a href="#Z_NULL">Z_NULL</a>, 0);
+
+     while (read_buffer(buffer, length) != EOF) {
+       <a href="#adler">adler</a> = <a href="#adler32">adler32</a>(<a href="#adler">adler</a>, buffer, length);
+     }
+     if (<a href="#adler">adler</a> != original_adler) error();
+   </pre>
+
+<font color="Blue"><dt> uLong  <a name="crc32">crc32</a>   (uLong crc, const Bytef *buf, uInt len);</font>
+<dd>
+     Update a running crc with the bytes buf[0..len-1] and return the updated
+   crc. If buf is NULL, this function returns the required initial value
+   for the crc. Pre- and post-conditioning (one's complement) is performed
+   within this function so it shouldn't be done by the application.
+   Usage example:
+   <pre>
+
+     uLong crc = <a href="#crc32">crc32</a>(0L, <a href="#Z_NULL">Z_NULL</a>, 0);
+
+     while (read_buffer(buffer, length) != EOF) {
+       crc = <a href="#crc32">crc32</a>(crc, buffer, length);
+     }
+     if (crc != original_crc) error();
+   </pre>
+</dl>
+<hr>
+<a name="struct z_stream_s"><h2> struct z_stream_s </h2>
+<font color="Blue">
+<a name="z_stream_s">
+<pre>
+typedef struct z_stream_s {
+    Bytef    *<a name="next_in">next_in</a>;  /* next input byte */
+    uInt     <a name="avail_in">avail_in</a>;  /* number of bytes available at <a href="#next_in">next_in</a> */
+    uLong    <a name="total_in">total_in</a>;  /* total nb of input bytes read so far */
+
+    Bytef    *<a name="next_out">next_out</a>; /* next output byte should be put there */
+    uInt     <a name="avail_out">avail_out</a>; /* remaining free space at <a href="#next_out">next_out</a> */
+    uLong    <a name="total_out">total_out</a>; /* total nb of bytes output so far */
+
+    char     *<a name="msg">msg</a>;      /* last error message, NULL if no error */
+    struct internal_state FAR *<a name="state">state</a>; /* not visible by applications */
+
+    alloc_func <a name="zalloc">zalloc</a>;  /* used to allocate the internal <a href="#state">state</a> */
+    free_func  <a name="zfree">zfree</a>;   /* used to free the internal <a href="#state">state</a> */
+    voidpf     <a name="opaque">opaque</a>;  /* private data object passed to <a href="#zalloc">zalloc</a> and <a href="#zfree">zfree</a> */
+
+    int     <a name="data_type">data_type</a>;  /* best guess about the data type: ascii or binary */
+    uLong   <a name="adler">adler</a>;      /* <a href="#adler32">adler32</a> value of the uncompressed data */
+    uLong   <a name="reserved">reserved</a>;   /* <a href="#reserved">reserved</a> for future use */
+} <a href="#z_stream_s">z_stream</a> ;
+
+typedef <a href="#z_stream_s">z_stream</a> FAR * <a name="z_streamp">z_streamp</a>;  ÿ
+</pre>
+</font>
+   The application must update <a href="#next_in">next_in</a> and <a href="#avail_in">avail_in</a> when <a href="#avail_in">avail_in</a> has
+   dropped to zero. It must update <a href="#next_out">next_out</a> and <a href="#avail_out">avail_out</a> when <a href="#avail_out">avail_out</a>
+   has dropped to zero. The application must initialize <a href="#zalloc">zalloc</a>, <a href="#zfree">zfree</a> and
+   <a href="#opaque">opaque</a> before calling the init function. All other fields are set by the
+   compression library and must not be updated by the application. <p>
+
+   The <a href="#opaque">opaque</a> value provided by the application will be passed as the first
+   parameter for calls of <a href="#zalloc">zalloc</a> and <a href="#zfree">zfree</a>. This can be useful for custom
+   memory management. The compression library attaches no meaning to the
+   <a href="#opaque">opaque</a> value. <p>
+
+   <a href="#zalloc">zalloc</a> must return <a href="#Z_NULL">Z_NULL</a> if there is not enough memory for the object.
+   If zlib is used in a multi-threaded application, <a href="#zalloc">zalloc</a> and <a href="#zfree">zfree</a> must be
+   thread safe. <p>
+
+   On 16-bit systems, the functions <a href="#zalloc">zalloc</a> and <a href="#zfree">zfree</a> must be able to allocate
+   exactly 65536 bytes, but will not be required to allocate more than this
+   if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS,
+   pointers returned by <a href="#zalloc">zalloc</a> for objects of exactly 65536 bytes *must*
+   have their offset normalized to zero. The default allocation function
+   provided by this library ensures this (see zutil.c). To reduce memory
+   requirements and avoid any allocation of 64K objects, at the expense of
+   compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h).
+   <p>
+
+   The fields <a href="#total_in">total_in</a> and <a href="#total_out">total_out</a> can be used for statistics or
+   progress reports. After compression, <a href="#total_in">total_in</a> holds the total size of
+   the uncompressed data and may be saved for use in the decompressor
+   (particularly if the decompressor wants to decompress everything in
+   a single step). <p>
+
+<hr>
+<a name="Constants"><h2> Constants </h2>
+<font color="Blue">
+<pre>
+#define <a name="Z_NO_FLUSH">Z_NO_FLUSH</a>      0
+#define <a name="Z_PARTIAL_FLUSH">Z_PARTIAL_FLUSH</a> 1
+	/* will be removed, use <a href="#Z_SYNC_FLUSH">Z_SYNC_FLUSH</a> instead */
+#define <a name="Z_SYNC_FLUSH">Z_SYNC_FLUSH</a>    2
+#define <a name="Z_FULL_FLUSH">Z_FULL_FLUSH</a>    3
+#define <a name="Z_FINISH">Z_FINISH</a>        4
+/* Allowed flush values ; see <a href="#deflate">deflate</a>() below for details */
+
+#define <a name="Z_OK">Z_OK</a>            0
+#define <a name="Z_STREAM_END">Z_STREAM_END</a>    1
+#define <a name="Z_NEED_DICT">Z_NEED_DICT</a>     2
+#define <a name="Z_ERRNO">Z_ERRNO</a>        (-1)
+#define <a name="Z_STREAM_ERROR">Z_STREAM_ERROR</a> (-2)
+#define <a name="Z_DATA_ERROR">Z_DATA_ERROR</a>   (-3)
+#define <a name="Z_MEM_ERROR">Z_MEM_ERROR</a>    (-4)
+#define <a name="Z_BUF_ERROR">Z_BUF_ERROR</a>    (-5)
+#define <a name="Z_VERSION_ERROR">Z_VERSION_ERROR</a> (-6)
+/* Return codes for the compression/decompression functions. Negative
+ * values are errors, positive values are used for special but normal events.
+ */
+
+#define <a name="Z_NO_COMPRESSION">Z_NO_COMPRESSION</a>         0
+#define <a name="Z_BEST_SPEED">Z_BEST_SPEED</a>             1
+#define <a name="Z_BEST_COMPRESSION">Z_BEST_COMPRESSION</a>       9
+#define <a name="Z_DEFAULT_COMPRESSION">Z_DEFAULT_COMPRESSION</a>  (-1)
+/* compression levels */
+
+#define <a name="Z_FILTERED">Z_FILTERED</a>            1
+#define <a name="Z_HUFFMAN_ONLY">Z_HUFFMAN_ONLY</a>        2
+#define <a name="Z_DEFAULT_STRATEGY">Z_DEFAULT_STRATEGY</a>    0
+/* compression strategy ; see <a href="#deflateInit2">deflateInit2</a>() below for details */
+
+#define <a name="Z_BINARY">Z_BINARY</a>   0
+#define <a name="Z_ASCII">Z_ASCII</a>    1
+#define <a name="Z_UNKNOWN">Z_UNKNOWN</a>  2
+/* Possible values of the <a href="#data_type">data_type</a> field */
+
+#define <a name="Z_DEFLATED">Z_DEFLATED</a>   8
+/* The <a href="#deflate">deflate</a> compression method (the only one supported in this version) */
+
+#define <a name="Z_NULL">Z_NULL</a>  0  /* for initializing <a href="#zalloc">zalloc</a>, <a href="#zfree">zfree</a>, <a href="#opaque">opaque</a> */
+
+#define <a name="zlib_version">zlib_version</a> <a href="#zlibVersion">zlibVersion</a>()
+/* for compatibility with versions less than 1.0.2 */
+</pre>
+</font>
+
+<hr>
+<a name="Misc"><h2> Misc </h2>
+ <a href="#deflateInit">deflateInit</a> and <a href="#inflateInit">inflateInit</a> are macros to allow checking the zlib version
+ and the compiler's view of <a href="#z_stream_s">z_stream</a>.
+ <p>
+ Other functions:
+ <dl>
+ <font color="Blue"><dt> const char   *  <a name="zError">zError</a>           (int err);</font>
+ <font color="Blue"><dt> int             <a name="inflateSyncPoint">inflateSyncPoint</a> (<a href="#z_streamp">z_streamp</a> z);</font>
+ <font color="Blue"><dt> const uLongf *  <a name="get_crc_table">get_crc_table</a>    (void);</font>
+ </dl>
+ <hr>
+ <font size="-1">
+ Last update: Wed Oct 13 20:42:34 1999<br>
+ piapi@csie.ntu.edu.tw
+ </font>
+
+</body>
+</html>
diff --git a/compat/zlib/projects/README.projects b/compat/zlib/projects/README.projects
new file mode 100644
index 0000000..1c029e4
--- /dev/null
+++ b/compat/zlib/projects/README.projects
@@ -0,0 +1,41 @@
+This directory contains project files for building zlib under various
+Integrated Development Environments (IDE).
+
+If you wish to submit a new project to this directory, you should comply
+to the following requirements.  Otherwise (e.g. if you wish to integrate
+a custom piece of code that changes the zlib interface or its behavior),
+please consider submitting the project to the contrib directory.
+
+
+Requirements
+============
+
+- The project must build zlib using the source files from the official
+  zlib source distribution, exclusively.
+
+- If the project produces redistributable builds (e.g. shared objects
+  or DLL files), these builds must be compatible to those produced by
+  makefiles, if such makefiles exist in the zlib distribution.
+  In particular, if the project produces a DLL build for the Win32
+  platform, this build must comply to the officially-ammended Win32 DLL
+  Application Binary Interface (ABI), described in win32/DLL_FAQ.txt.
+
+- The project may provide additional build targets, which depend on
+  3rd-party (unofficially-supported) software, present in the contrib
+  directory.  For example, it is possible to provide an "ASM build",
+  besides the officially-supported build, and have ASM source files
+  among its dependencies.
+
+- If there are significant differences between the project files created
+  by different versions of an IDE (e.g. Visual C++ 6.0 vs. 7.0), the name
+  of the project directory should contain the version number of the IDE
+  for which the project is intended (e.g. "visualc6" for Visual C++ 6.0,
+  or "visualc7" for Visual C++ 7.0 and 7.1).
+
+
+Current projects
+================
+
+visualc6/   by Simon-Pierre Cadieux <methodex@methodex.ca>
+            and Cosmin Truta <cosmint@cs.ubbcluj.ro>
+        Project for Microsoft Visual C++ 6.0
diff --git a/compat/zlib/projects/visualc6/README.txt b/compat/zlib/projects/visualc6/README.txt
new file mode 100644
index 0000000..3d0aef0
--- /dev/null
+++ b/compat/zlib/projects/visualc6/README.txt
@@ -0,0 +1,73 @@
+Microsoft Developer Studio Project Files, Format Version 6.00 for zlib.
+
+Copyright (C) 2000-2004 Simon-Pierre Cadieux.
+Copyright (C) 2004 Cosmin Truta.
+For conditions of distribution and use, see copyright notice in zlib.h.
+
+
+This project builds the zlib binaries as follows:
+
+* Win32_DLL_Release\zlib1.dll       DLL build
+* Win32_DLL_Debug\zlib1d.dll        DLL build (debug version)
+* Win32_DLL_ASM_Release\zlib1.dll   DLL build using ASM code
+* Win32_DLL_ASM_Debug\zlib1d.dll    DLL build using ASM code (debug version)
+* Win32_LIB_Release\zlib.lib        static build
+* Win32_LIB_Debug\zlibd.lib         static build (debug version)
+* Win32_LIB_ASM_Release\zlib.lib    static build using ASM code
+* Win32_LIB_ASM_Debug\zlibd.lib     static build using ASM code (debug version)
+
+
+For more information regarding the DLL builds, please see the DLL FAQ
+in ..\..\win32\DLL_FAQ.txt.
+
+
+To build and test:
+
+1) On the main menu, select "File | Open Workspace".
+   Open "zlib.dsw".
+
+2) Select "Build | Set Active Configuration".
+   Choose the configuration you wish to build.
+
+3) Select "Build | Clean".
+
+4) Select "Build | Build ... (F7)".  Ignore warning messages about
+   not being able to find certain include files (e.g. alloc.h).
+
+5) If you built one of the sample programs (example or minigzip),
+   select "Build | Execute ... (Ctrl+F5)".
+
+
+To use:
+
+1) Select "Project | Settings (Alt+F7)".
+   Make note of the configuration names used in your project.
+   Usually, these names are "Win32 Release" and "Win32 Debug".
+
+2) In the Workspace window, select the "FileView" tab.
+   Right-click on the root item "Workspace '...'".
+   Select "Insert Project into Workspace".
+   Switch on the checkbox "Dependency of:", and select the name
+   of your project.  Open "zlib.dsp".
+
+3) Select "Build | Configurations".
+   For each configuration of your project:
+   3.1) Choose the zlib configuration you wish to use.
+   3.2) Click on "Add".
+   3.3) Set the new zlib configuration name to the name used by
+        the configuration from the current iteration.
+
+4) Select "Build | Set Active Configuration".
+   Choose the configuration you wish to build.
+
+5) Select "Build | Build ... (F7)".
+
+6) If you built an executable program, select
+   "Build | Execute ... (Ctrl+F5)".
+
+
+Note:
+
+To build the ASM-enabled code, you need Microsoft Assembler
+(ML.EXE).  You can get it by downloading and installing the
+latest Processor Pack for Visual C++ 6.0.
diff --git a/compat/zlib/projects/visualc6/example.dsp b/compat/zlib/projects/visualc6/example.dsp
new file mode 100644
index 0000000..2599efd
--- /dev/null
+++ b/compat/zlib/projects/visualc6/example.dsp
@@ -0,0 +1,278 @@
+# Microsoft Developer Studio Project File - Name="example" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 6.00
+# ** DO NOT EDIT **
+
+# TARGTYPE "Win32 (x86) Console Application" 0x0103
+
+CFG=example - Win32 LIB Debug
+!MESSAGE This is not a valid makefile. To build this project using NMAKE,
+!MESSAGE use the Export Makefile command and run
+!MESSAGE
+!MESSAGE NMAKE /f "example.mak".
+!MESSAGE
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE
+!MESSAGE NMAKE /f "example.mak" CFG="example - Win32 LIB Debug"
+!MESSAGE
+!MESSAGE Possible choices for configuration are:
+!MESSAGE
+!MESSAGE "example - Win32 DLL ASM Release" (based on "Win32 (x86) Console Application")
+!MESSAGE "example - Win32 DLL ASM Debug" (based on "Win32 (x86) Console Application")
+!MESSAGE "example - Win32 DLL Release" (based on "Win32 (x86) Console Application")
+!MESSAGE "example - Win32 DLL Debug" (based on "Win32 (x86) Console Application")
+!MESSAGE "example - Win32 LIB ASM Release" (based on "Win32 (x86) Console Application")
+!MESSAGE "example - Win32 LIB ASM Debug" (based on "Win32 (x86) Console Application")
+!MESSAGE "example - Win32 LIB Release" (based on "Win32 (x86) Console Application")
+!MESSAGE "example - Win32 LIB Debug" (based on "Win32 (x86) Console Application")
+!MESSAGE
+
+# Begin Project
+# PROP AllowPerConfigDependencies 0
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+CPP=cl.exe
+RSC=rc.exe
+
+!IF  "$(CFG)" == "example - Win32 DLL ASM Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "example___Win32_DLL_ASM_Release"
+# PROP BASE Intermediate_Dir "example___Win32_DLL_ASM_Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Win32_DLL_ASM_Release"
+# PROP Intermediate_Dir "Win32_DLL_ASM_Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
+# SUBTRACT BASE CPP /YX
+# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "NDEBUG" /FD /c
+# SUBTRACT CPP /YX
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
+# ADD LINK32 /nologo /subsystem:console /machine:I386
+
+!ELSEIF  "$(CFG)" == "example - Win32 DLL ASM Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "example___Win32_DLL_ASM_Debug"
+# PROP BASE Intermediate_Dir "example___Win32_DLL_ASM_Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Win32_DLL_ASM_Debug"
+# PROP Intermediate_Dir "Win32_DLL_ASM_Debug"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
+# SUBTRACT BASE CPP /YX
+# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "_DEBUG" /FR /FD /GZ /c
+# SUBTRACT CPP /YX
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+# ADD LINK32 /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+
+!ELSEIF  "$(CFG)" == "example - Win32 DLL Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "example___Win32_DLL_Release"
+# PROP BASE Intermediate_Dir "example___Win32_DLL_Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Win32_DLL_Release"
+# PROP Intermediate_Dir "Win32_DLL_Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
+# SUBTRACT BASE CPP /YX
+# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "NDEBUG" /FD /c
+# SUBTRACT CPP /YX
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
+# ADD LINK32 /nologo /subsystem:console /machine:I386
+
+!ELSEIF  "$(CFG)" == "example - Win32 DLL Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "example___Win32_DLL_Debug"
+# PROP BASE Intermediate_Dir "example___Win32_DLL_Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Win32_DLL_Debug"
+# PROP Intermediate_Dir "Win32_DLL_Debug"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
+# SUBTRACT BASE CPP /YX
+# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "_DEBUG" /FR /FD /GZ /c
+# SUBTRACT CPP /YX
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+# ADD LINK32 /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+
+!ELSEIF  "$(CFG)" == "example - Win32 LIB ASM Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "example___Win32_LIB_ASM_Release"
+# PROP BASE Intermediate_Dir "example___Win32_LIB_ASM_Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Win32_LIB_ASM_Release"
+# PROP Intermediate_Dir "Win32_LIB_ASM_Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
+# SUBTRACT BASE CPP /YX
+# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "NDEBUG" /FD /c
+# SUBTRACT CPP /YX
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
+# ADD LINK32 /nologo /subsystem:console /machine:I386
+
+!ELSEIF  "$(CFG)" == "example - Win32 LIB ASM Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "example___Win32_LIB_ASM_Debug"
+# PROP BASE Intermediate_Dir "example___Win32_LIB_ASM_Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Win32_LIB_ASM_Debug"
+# PROP Intermediate_Dir "Win32_LIB_ASM_Debug"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
+# SUBTRACT BASE CPP /YX
+# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "_DEBUG" /FR /FD /GZ /c
+# SUBTRACT CPP /YX
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+# ADD LINK32 /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+
+!ELSEIF  "$(CFG)" == "example - Win32 LIB Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "example___Win32_LIB_Release"
+# PROP BASE Intermediate_Dir "example___Win32_LIB_Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Win32_LIB_Release"
+# PROP Intermediate_Dir "Win32_LIB_Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
+# SUBTRACT BASE CPP /YX
+# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "NDEBUG" /FD /c
+# SUBTRACT CPP /YX
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
+# ADD LINK32 /nologo /subsystem:console /machine:I386
+
+!ELSEIF  "$(CFG)" == "example - Win32 LIB Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "example___Win32_LIB_Debug"
+# PROP BASE Intermediate_Dir "example___Win32_LIB_Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Win32_LIB_Debug"
+# PROP Intermediate_Dir "Win32_LIB_Debug"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
+# SUBTRACT BASE CPP /YX
+# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "_DEBUG" /FR /FD /GZ /c
+# SUBTRACT CPP /YX
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+# ADD LINK32 /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+
+!ENDIF
+
+# Begin Target
+
+# Name "example - Win32 DLL ASM Release"
+# Name "example - Win32 DLL ASM Debug"
+# Name "example - Win32 DLL Release"
+# Name "example - Win32 DLL Debug"
+# Name "example - Win32 LIB ASM Release"
+# Name "example - Win32 LIB ASM Debug"
+# Name "example - Win32 LIB Release"
+# Name "example - Win32 LIB Debug"
+# Begin Group "Source Files"
+
+# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
+# Begin Source File
+
+SOURCE=..\..\example.c
+# End Source File
+# End Group
+# Begin Group "Header Files"
+
+# PROP Default_Filter "h;hpp;hxx;hm;inl"
+# Begin Source File
+
+SOURCE=..\..\zconf.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\zlib.h
+# End Source File
+# End Group
+# End Target
+# End Project
diff --git a/compat/zlib/projects/visualc6/minigzip.dsp b/compat/zlib/projects/visualc6/minigzip.dsp
new file mode 100644
index 0000000..941582b
--- /dev/null
+++ b/compat/zlib/projects/visualc6/minigzip.dsp
@@ -0,0 +1,278 @@
+# Microsoft Developer Studio Project File - Name="minigzip" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 6.00
+# ** DO NOT EDIT **
+
+# TARGTYPE "Win32 (x86) Console Application" 0x0103
+
+CFG=minigzip - Win32 LIB Debug
+!MESSAGE This is not a valid makefile. To build this project using NMAKE,
+!MESSAGE use the Export Makefile command and run
+!MESSAGE
+!MESSAGE NMAKE /f "minigzip.mak".
+!MESSAGE
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE
+!MESSAGE NMAKE /f "minigzip.mak" CFG="minigzip - Win32 LIB Debug"
+!MESSAGE
+!MESSAGE Possible choices for configuration are:
+!MESSAGE
+!MESSAGE "minigzip - Win32 DLL ASM Release" (based on "Win32 (x86) Console Application")
+!MESSAGE "minigzip - Win32 DLL ASM Debug" (based on "Win32 (x86) Console Application")
+!MESSAGE "minigzip - Win32 DLL Release" (based on "Win32 (x86) Console Application")
+!MESSAGE "minigzip - Win32 DLL Debug" (based on "Win32 (x86) Console Application")
+!MESSAGE "minigzip - Win32 LIB ASM Release" (based on "Win32 (x86) Console Application")
+!MESSAGE "minigzip - Win32 LIB ASM Debug" (based on "Win32 (x86) Console Application")
+!MESSAGE "minigzip - Win32 LIB Release" (based on "Win32 (x86) Console Application")
+!MESSAGE "minigzip - Win32 LIB Debug" (based on "Win32 (x86) Console Application")
+!MESSAGE
+
+# Begin Project
+# PROP AllowPerConfigDependencies 0
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+CPP=cl.exe
+RSC=rc.exe
+
+!IF  "$(CFG)" == "minigzip - Win32 DLL ASM Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "minigzip___Win32_DLL_ASM_Release"
+# PROP BASE Intermediate_Dir "minigzip___Win32_DLL_ASM_Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Win32_DLL_ASM_Release"
+# PROP Intermediate_Dir "Win32_DLL_ASM_Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
+# SUBTRACT BASE CPP /YX
+# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "NDEBUG" /FD /c
+# SUBTRACT CPP /YX
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
+# ADD LINK32 /nologo /subsystem:console /machine:I386
+
+!ELSEIF  "$(CFG)" == "minigzip - Win32 DLL ASM Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "minigzip___Win32_DLL_ASM_Debug"
+# PROP BASE Intermediate_Dir "minigzip___Win32_DLL_ASM_Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Win32_DLL_ASM_Debug"
+# PROP Intermediate_Dir "Win32_DLL_ASM_Debug"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
+# SUBTRACT BASE CPP /YX
+# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "_DEBUG" /FR /FD /GZ /c
+# SUBTRACT CPP /YX
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+# ADD LINK32 /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+
+!ELSEIF  "$(CFG)" == "minigzip - Win32 DLL Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "minigzip___Win32_DLL_Release"
+# PROP BASE Intermediate_Dir "minigzip___Win32_DLL_Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Win32_DLL_Release"
+# PROP Intermediate_Dir "Win32_DLL_Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
+# SUBTRACT BASE CPP /YX
+# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "NDEBUG" /FD /c
+# SUBTRACT CPP /YX
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
+# ADD LINK32 /nologo /subsystem:console /machine:I386
+
+!ELSEIF  "$(CFG)" == "minigzip - Win32 DLL Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "minigzip___Win32_DLL_Debug"
+# PROP BASE Intermediate_Dir "minigzip___Win32_DLL_Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Win32_DLL_Debug"
+# PROP Intermediate_Dir "Win32_DLL_Debug"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
+# SUBTRACT BASE CPP /YX
+# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "_DEBUG" /FR /FD /GZ /c
+# SUBTRACT CPP /YX
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+# ADD LINK32 /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+
+!ELSEIF  "$(CFG)" == "minigzip - Win32 LIB ASM Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "minigzip___Win32_LIB_ASM_Release"
+# PROP BASE Intermediate_Dir "minigzip___Win32_LIB_ASM_Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Win32_LIB_ASM_Release"
+# PROP Intermediate_Dir "Win32_LIB_ASM_Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
+# SUBTRACT BASE CPP /YX
+# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "NDEBUG" /FD /c
+# SUBTRACT CPP /YX
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
+# ADD LINK32 /nologo /subsystem:console /machine:I386
+
+!ELSEIF  "$(CFG)" == "minigzip - Win32 LIB ASM Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "minigzip___Win32_LIB_ASM_Debug"
+# PROP BASE Intermediate_Dir "minigzip___Win32_LIB_ASM_Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Win32_LIB_ASM_Debug"
+# PROP Intermediate_Dir "Win32_LIB_ASM_Debug"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
+# SUBTRACT BASE CPP /YX
+# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "_DEBUG" /FR /FD /GZ /c
+# SUBTRACT CPP /YX
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+# ADD LINK32 /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+
+!ELSEIF  "$(CFG)" == "minigzip - Win32 LIB Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "minigzip___Win32_LIB_Release"
+# PROP BASE Intermediate_Dir "minigzip___Win32_LIB_Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Win32_LIB_Release"
+# PROP Intermediate_Dir "Win32_LIB_Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
+# SUBTRACT BASE CPP /YX
+# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "NDEBUG" /FD /c
+# SUBTRACT CPP /YX
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
+# ADD LINK32 /nologo /subsystem:console /machine:I386
+
+!ELSEIF  "$(CFG)" == "minigzip - Win32 LIB Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "minigzip___Win32_LIB_Debug"
+# PROP BASE Intermediate_Dir "minigzip___Win32_LIB_Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Win32_LIB_Debug"
+# PROP Intermediate_Dir "Win32_LIB_Debug"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
+# SUBTRACT BASE CPP /YX
+# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "_DEBUG" /FR /FD /GZ /c
+# SUBTRACT CPP /YX
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+# ADD LINK32 /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+
+!ENDIF
+
+# Begin Target
+
+# Name "minigzip - Win32 DLL ASM Release"
+# Name "minigzip - Win32 DLL ASM Debug"
+# Name "minigzip - Win32 DLL Release"
+# Name "minigzip - Win32 DLL Debug"
+# Name "minigzip - Win32 LIB ASM Release"
+# Name "minigzip - Win32 LIB ASM Debug"
+# Name "minigzip - Win32 LIB Release"
+# Name "minigzip - Win32 LIB Debug"
+# Begin Group "Source Files"
+
+# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
+# Begin Source File
+
+SOURCE=..\..\minigzip.c
+# End Source File
+# End Group
+# Begin Group "Header Files"
+
+# PROP Default_Filter "h;hpp;hxx;hm;inl"
+# Begin Source File
+
+SOURCE=..\..\zconf.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\zlib.h
+# End Source File
+# End Group
+# End Target
+# End Project
diff --git a/compat/zlib/projects/visualc6/zlib.dsp b/compat/zlib/projects/visualc6/zlib.dsp
new file mode 100644
index 0000000..34f1f30
--- /dev/null
+++ b/compat/zlib/projects/visualc6/zlib.dsp
@@ -0,0 +1,621 @@
+# Microsoft Developer Studio Project File - Name="zlib" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 6.00
+# ** DO NOT EDIT **
+
+# TARGTYPE "Win32 (x86) Dynamic-Link Library" 0x0102
+# TARGTYPE "Win32 (x86) Static Library" 0x0104
+
+CFG=zlib - Win32 LIB Debug
+!MESSAGE This is not a valid makefile. To build this project using NMAKE,
+!MESSAGE use the Export Makefile command and run
+!MESSAGE
+!MESSAGE NMAKE /f "zlib.mak".
+!MESSAGE
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE
+!MESSAGE NMAKE /f "zlib.mak" CFG="zlib - Win32 LIB Debug"
+!MESSAGE
+!MESSAGE Possible choices for configuration are:
+!MESSAGE
+!MESSAGE "zlib - Win32 DLL ASM Release" (based on "Win32 (x86) Dynamic-Link Library")
+!MESSAGE "zlib - Win32 DLL ASM Debug" (based on "Win32 (x86) Dynamic-Link Library")
+!MESSAGE "zlib - Win32 DLL Release" (based on "Win32 (x86) Dynamic-Link Library")
+!MESSAGE "zlib - Win32 DLL Debug" (based on "Win32 (x86) Dynamic-Link Library")
+!MESSAGE "zlib - Win32 LIB ASM Release" (based on "Win32 (x86) Static Library")
+!MESSAGE "zlib - Win32 LIB ASM Debug" (based on "Win32 (x86) Static Library")
+!MESSAGE "zlib - Win32 LIB Release" (based on "Win32 (x86) Static Library")
+!MESSAGE "zlib - Win32 LIB Debug" (based on "Win32 (x86) Static Library")
+!MESSAGE
+
+# Begin Project
+# PROP AllowPerConfigDependencies 0
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+
+!IF  "$(CFG)" == "zlib - Win32 DLL ASM Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "zlib___Win32_DLL_ASM_Release"
+# PROP BASE Intermediate_Dir "zlib___Win32_DLL_ASM_Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Win32_DLL_ASM_Release"
+# PROP Intermediate_Dir "Win32_DLL_ASM_Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+CPP=cl.exe
+# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
+# SUBTRACT BASE CPP /YX /Yc /Yu
+# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "NDEBUG" /D "ASMV" /D "ASMINF" /FD /c
+# SUBTRACT CPP /YX /Yc /Yu
+MTL=midl.exe
+# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+RSC=rc.exe
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /dll /machine:I386
+# ADD LINK32 /nologo /dll /machine:I386 /out:"Win32_DLL_ASM_Release\zlib1.dll"
+
+!ELSEIF  "$(CFG)" == "zlib - Win32 DLL ASM Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "zlib___Win32_DLL_ASM_Debug"
+# PROP BASE Intermediate_Dir "zlib___Win32_DLL_ASM_Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Win32_DLL_ASM_Debug"
+# PROP Intermediate_Dir "Win32_DLL_ASM_Debug"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+CPP=cl.exe
+# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
+# SUBTRACT BASE CPP /YX /Yc /Yu
+# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "_DEBUG" /D "ASMV" /D "ASMINF" /FR /FD /GZ /c
+# SUBTRACT CPP /YX /Yc /Yu
+MTL=midl.exe
+# ADD BASE MTL /nologo /D "_DEBUG" /mktyplib203 /win32
+# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /win32
+RSC=rc.exe
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /dll /debug /machine:I386 /pdbtype:sept
+# ADD LINK32 /nologo /dll /debug /machine:I386 /out:"Win32_DLL_ASM_Debug\zlib1d.dll" /pdbtype:sept
+
+!ELSEIF  "$(CFG)" == "zlib - Win32 DLL Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "zlib___Win32_DLL_Release"
+# PROP BASE Intermediate_Dir "zlib___Win32_DLL_Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Win32_DLL_Release"
+# PROP Intermediate_Dir "Win32_DLL_Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+CPP=cl.exe
+# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
+# SUBTRACT BASE CPP /YX /Yc /Yu
+# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "NDEBUG" /FD /c
+# SUBTRACT CPP /YX /Yc /Yu
+MTL=midl.exe
+# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+RSC=rc.exe
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /dll /machine:I386
+# ADD LINK32 /nologo /dll /machine:I386 /out:"Win32_DLL_Release\zlib1.dll"
+
+!ELSEIF  "$(CFG)" == "zlib - Win32 DLL Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "zlib___Win32_DLL_Debug"
+# PROP BASE Intermediate_Dir "zlib___Win32_DLL_Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Win32_DLL_Debug"
+# PROP Intermediate_Dir "Win32_DLL_Debug"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+CPP=cl.exe
+# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
+# SUBTRACT BASE CPP /YX /Yc /Yu
+# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "_DEBUG" /FR /FD /GZ /c
+# SUBTRACT CPP /YX /Yc /Yu
+MTL=midl.exe
+# ADD BASE MTL /nologo /D "_DEBUG" /mktyplib203 /win32
+# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /win32
+RSC=rc.exe
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /dll /debug /machine:I386 /pdbtype:sept
+# ADD LINK32 /nologo /dll /debug /machine:I386 /out:"Win32_DLL_Debug\zlib1d.dll" /pdbtype:sept
+
+!ELSEIF  "$(CFG)" == "zlib - Win32 LIB ASM Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "zlib___Win32_LIB_ASM_Release"
+# PROP BASE Intermediate_Dir "zlib___Win32_LIB_ASM_Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Win32_LIB_ASM_Release"
+# PROP Intermediate_Dir "Win32_LIB_ASM_Release"
+# PROP Target_Dir ""
+CPP=cl.exe
+# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
+# SUBTRACT BASE CPP /YX /Yc /Yu
+# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "NDEBUG" /D "ASMV" /D "ASMINF" /FD /c
+# SUBTRACT CPP /YX /Yc /Yu
+RSC=rc.exe
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LIB32=link.exe -lib
+# ADD BASE LIB32 /nologo
+# ADD LIB32 /nologo
+
+!ELSEIF  "$(CFG)" == "zlib - Win32 LIB ASM Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "zlib___Win32_LIB_ASM_Debug"
+# PROP BASE Intermediate_Dir "zlib___Win32_LIB_ASM_Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Win32_LIB_ASM_Debug"
+# PROP Intermediate_Dir "Win32_LIB_ASM_Debug"
+# PROP Target_Dir ""
+CPP=cl.exe
+# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
+# SUBTRACT BASE CPP /YX /Yc /Yu
+# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "_DEBUG" /D "ASMV" /D "ASMINF" /FR /FD /GZ /c
+# SUBTRACT CPP /YX /Yc /Yu
+RSC=rc.exe
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LIB32=link.exe -lib
+# ADD BASE LIB32 /nologo
+# ADD LIB32 /nologo /out:"Win32_LIB_ASM_Debug\zlibd.lib"
+
+!ELSEIF  "$(CFG)" == "zlib - Win32 LIB Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "zlib___Win32_LIB_Release"
+# PROP BASE Intermediate_Dir "zlib___Win32_LIB_Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Win32_LIB_Release"
+# PROP Intermediate_Dir "Win32_LIB_Release"
+# PROP Target_Dir ""
+CPP=cl.exe
+# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
+# SUBTRACT BASE CPP /YX /Yc /Yu
+# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "NDEBUG" /FD /c
+# SUBTRACT CPP /YX /Yc /Yu
+RSC=rc.exe
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LIB32=link.exe -lib
+# ADD BASE LIB32 /nologo
+# ADD LIB32 /nologo
+
+!ELSEIF  "$(CFG)" == "zlib - Win32 LIB Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "zlib___Win32_LIB_Debug"
+# PROP BASE Intermediate_Dir "zlib___Win32_LIB_Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Win32_LIB_Debug"
+# PROP Intermediate_Dir "Win32_LIB_Debug"
+# PROP Target_Dir ""
+CPP=cl.exe
+# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
+# SUBTRACT BASE CPP /YX /Yc /Yu
+# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "_DEBUG" /FR /FD /GZ /c
+# SUBTRACT CPP /YX /Yc /Yu
+RSC=rc.exe
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LIB32=link.exe -lib
+# ADD BASE LIB32 /nologo
+# ADD LIB32 /nologo /out:"Win32_LIB_Debug\zlibd.lib"
+
+!ENDIF
+
+# Begin Target
+
+# Name "zlib - Win32 DLL ASM Release"
+# Name "zlib - Win32 DLL ASM Debug"
+# Name "zlib - Win32 DLL Release"
+# Name "zlib - Win32 DLL Debug"
+# Name "zlib - Win32 LIB ASM Release"
+# Name "zlib - Win32 LIB ASM Debug"
+# Name "zlib - Win32 LIB Release"
+# Name "zlib - Win32 LIB Debug"
+# Begin Group "Source Files"
+
+# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
+# Begin Source File
+
+SOURCE=..\..\adler32.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\compress.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\crc32.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\deflate.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\gzclose.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\gzlib.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\gzread.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\gzwrite.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\infback.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\inffast.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\inflate.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\inftrees.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\trees.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\uncompr.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\win32\zlib.def
+
+!IF  "$(CFG)" == "zlib - Win32 DLL ASM Release"
+
+!ELSEIF  "$(CFG)" == "zlib - Win32 DLL ASM Debug"
+
+!ELSEIF  "$(CFG)" == "zlib - Win32 DLL Release"
+
+!ELSEIF  "$(CFG)" == "zlib - Win32 DLL Debug"
+
+!ELSEIF  "$(CFG)" == "zlib - Win32 LIB ASM Release"
+
+# PROP Exclude_From_Build 1
+
+!ELSEIF  "$(CFG)" == "zlib - Win32 LIB ASM Debug"
+
+# PROP Exclude_From_Build 1
+
+!ELSEIF  "$(CFG)" == "zlib - Win32 LIB Release"
+
+# PROP Exclude_From_Build 1
+
+!ELSEIF  "$(CFG)" == "zlib - Win32 LIB Debug"
+
+# PROP Exclude_From_Build 1
+
+!ENDIF
+
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\zutil.c
+# End Source File
+# End Group
+# Begin Group "Header Files"
+
+# PROP Default_Filter "h;hpp;hxx;hm;inl"
+# Begin Source File
+
+SOURCE=..\..\crc32.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\deflate.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\inffast.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\inffixed.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\inflate.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\inftrees.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\trees.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\zconf.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\zlib.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\zutil.h
+# End Source File
+# End Group
+# Begin Group "Resource Files"
+
+# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
+# Begin Source File
+
+SOURCE=..\..\win32\zlib1.rc
+# End Source File
+# End Group
+# Begin Group "Assembler Files (Unsupported)"
+
+# PROP Default_Filter "asm;obj;c;cpp;cxx;h;hpp;hxx"
+# Begin Source File
+
+SOURCE=..\..\contrib\masmx86\gvmat32.asm
+
+!IF  "$(CFG)" == "zlib - Win32 DLL ASM Release"
+
+# Begin Custom Build - Assembling...
+IntDir=.\Win32_DLL_ASM_Release
+InputPath=..\..\contrib\masmx86\gvmat32.asm
+InputName=gvmat32
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	ml.exe /nologo /c /coff /Cx /Fo"$(IntDir)\$(InputName).obj" "$(InputPath)"
+
+# End Custom Build
+
+!ELSEIF  "$(CFG)" == "zlib - Win32 DLL ASM Debug"
+
+# Begin Custom Build - Assembling...
+IntDir=.\Win32_DLL_ASM_Debug
+InputPath=..\..\contrib\masmx86\gvmat32.asm
+InputName=gvmat32
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	ml.exe /nologo /c /coff /Cx /Zi /Fo"$(IntDir)\$(InputName).obj" "$(InputPath)"
+
+# End Custom Build
+
+!ELSEIF  "$(CFG)" == "zlib - Win32 DLL Release"
+
+# PROP Exclude_From_Build 1
+
+!ELSEIF  "$(CFG)" == "zlib - Win32 DLL Debug"
+
+# PROP Exclude_From_Build 1
+
+!ELSEIF  "$(CFG)" == "zlib - Win32 LIB ASM Release"
+
+# Begin Custom Build - Assembling...
+IntDir=.\Win32_LIB_ASM_Release
+InputPath=..\..\contrib\masmx86\gvmat32.asm
+InputName=gvmat32
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	ml.exe /nologo /c /coff /Cx /Fo"$(IntDir)\$(InputName).obj" "$(InputPath)"
+
+# End Custom Build
+
+!ELSEIF  "$(CFG)" == "zlib - Win32 LIB ASM Debug"
+
+# Begin Custom Build - Assembling...
+IntDir=.\Win32_LIB_ASM_Debug
+InputPath=..\..\contrib\masmx86\gvmat32.asm
+InputName=gvmat32
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	ml.exe /nologo /c /coff /Cx /Zi /Fo"$(IntDir)\$(InputName).obj" "$(InputPath)"
+
+# End Custom Build
+
+!ELSEIF  "$(CFG)" == "zlib - Win32 LIB Release"
+
+# PROP Exclude_From_Build 1
+
+!ELSEIF  "$(CFG)" == "zlib - Win32 LIB Debug"
+
+# PROP Exclude_From_Build 1
+
+!ENDIF
+
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\contrib\masmx86\gvmat32c.c
+
+!IF  "$(CFG)" == "zlib - Win32 DLL ASM Release"
+
+# ADD CPP /I "..\.."
+
+!ELSEIF  "$(CFG)" == "zlib - Win32 DLL ASM Debug"
+
+# ADD CPP /I "..\.."
+
+!ELSEIF  "$(CFG)" == "zlib - Win32 DLL Release"
+
+# PROP Exclude_From_Build 1
+# ADD CPP /I "..\.."
+
+!ELSEIF  "$(CFG)" == "zlib - Win32 DLL Debug"
+
+# PROP Exclude_From_Build 1
+# ADD CPP /I "..\.."
+
+!ELSEIF  "$(CFG)" == "zlib - Win32 LIB ASM Release"
+
+# ADD CPP /I "..\.."
+
+!ELSEIF  "$(CFG)" == "zlib - Win32 LIB ASM Debug"
+
+# ADD CPP /I "..\.."
+
+!ELSEIF  "$(CFG)" == "zlib - Win32 LIB Release"
+
+# PROP Exclude_From_Build 1
+# ADD CPP /I "..\.."
+
+!ELSEIF  "$(CFG)" == "zlib - Win32 LIB Debug"
+
+# PROP Exclude_From_Build 1
+# ADD CPP /I "..\.."
+
+!ENDIF
+
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\contrib\masmx86\inffas32.asm
+
+!IF  "$(CFG)" == "zlib - Win32 DLL ASM Release"
+
+# Begin Custom Build - Assembling...
+IntDir=.\Win32_DLL_ASM_Release
+InputPath=..\..\contrib\masmx86\inffas32.asm
+InputName=inffas32
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	ml.exe /nologo /c /coff /Cx /Fo"$(IntDir)\$(InputName).obj" "$(InputPath)"
+
+# End Custom Build
+
+!ELSEIF  "$(CFG)" == "zlib - Win32 DLL ASM Debug"
+
+# Begin Custom Build - Assembling...
+IntDir=.\Win32_DLL_ASM_Debug
+InputPath=..\..\contrib\masmx86\inffas32.asm
+InputName=inffas32
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	ml.exe /nologo /c /coff /Cx /Zi /Fo"$(IntDir)\$(InputName).obj" "$(InputPath)"
+
+# End Custom Build
+
+!ELSEIF  "$(CFG)" == "zlib - Win32 DLL Release"
+
+# PROP Exclude_From_Build 1
+
+!ELSEIF  "$(CFG)" == "zlib - Win32 DLL Debug"
+
+# PROP Exclude_From_Build 1
+
+!ELSEIF  "$(CFG)" == "zlib - Win32 LIB ASM Release"
+
+# Begin Custom Build - Assembling...
+IntDir=.\Win32_LIB_ASM_Release
+InputPath=..\..\contrib\masmx86\inffas32.asm
+InputName=inffas32
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	ml.exe /nologo /c /coff /Cx /Fo"$(IntDir)\$(InputName).obj" "$(InputPath)"
+
+# End Custom Build
+
+!ELSEIF  "$(CFG)" == "zlib - Win32 LIB ASM Debug"
+
+# Begin Custom Build - Assembling...
+IntDir=.\Win32_LIB_ASM_Debug
+InputPath=..\..\contrib\masmx86\inffas32.asm
+InputName=inffas32
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	ml.exe /nologo /c /coff /Cx /Zi /Fo"$(IntDir)\$(InputName).obj" "$(InputPath)"
+
+# End Custom Build
+
+!ELSEIF  "$(CFG)" == "zlib - Win32 LIB Release"
+
+# PROP Exclude_From_Build 1
+
+!ELSEIF  "$(CFG)" == "zlib - Win32 LIB Debug"
+
+# PROP Exclude_From_Build 1
+
+!ENDIF
+
+# End Source File
+# End Group
+# Begin Source File
+
+SOURCE=.\README.txt
+# End Source File
+# End Target
+# End Project
diff --git a/compat/zlib/projects/visualc6/zlib.dsw b/compat/zlib/projects/visualc6/zlib.dsw
new file mode 100644
index 0000000..2644856
--- /dev/null
+++ b/compat/zlib/projects/visualc6/zlib.dsw
@@ -0,0 +1,59 @@
+Microsoft Developer Studio Workspace File, Format Version 6.00
+# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
+
+###############################################################################
+
+Project: "example"=.\example.dsp - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+    Begin Project Dependency
+    Project_Dep_Name zlib
+    End Project Dependency
+}}}
+
+###############################################################################
+
+Project: "minigzip"=.\minigzip.dsp - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+    Begin Project Dependency
+    Project_Dep_Name zlib
+    End Project Dependency
+}}}
+
+###############################################################################
+
+Project: "zlib"=.\zlib.dsp - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Global:
+
+Package=<5>
+{{{
+}}}
+
+Package=<3>
+{{{
+}}}
+
+###############################################################################
+
diff --git a/compat/zlib/zconf.in.h b/compat/zlib/zconf.in.h
new file mode 100644
index 0000000..49595cc
--- /dev/null
+++ b/compat/zlib/zconf.in.h
@@ -0,0 +1,332 @@
+/* zconf.h -- configuration of the zlib compression library
+ * Copyright (C) 1995-2005 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id: zconf.in.h,v 1.1 2008/12/18 14:14:59 dkf Exp $ */
+
+#ifndef ZCONF_H
+#define ZCONF_H
+
+/*
+ * If you *really* need a unique prefix for all types and library functions,
+ * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it.
+ */
+#ifdef Z_PREFIX
+#  define deflateInit_          z_deflateInit_
+#  define deflate               z_deflate
+#  define deflateEnd            z_deflateEnd
+#  define inflateInit_          z_inflateInit_
+#  define inflate               z_inflate
+#  define inflateEnd            z_inflateEnd
+#  define deflateInit2_         z_deflateInit2_
+#  define deflateSetDictionary  z_deflateSetDictionary
+#  define deflateCopy           z_deflateCopy
+#  define deflateReset          z_deflateReset
+#  define deflateParams         z_deflateParams
+#  define deflateBound          z_deflateBound
+#  define deflatePrime          z_deflatePrime
+#  define inflateInit2_         z_inflateInit2_
+#  define inflateSetDictionary  z_inflateSetDictionary
+#  define inflateSync           z_inflateSync
+#  define inflateSyncPoint      z_inflateSyncPoint
+#  define inflateCopy           z_inflateCopy
+#  define inflateReset          z_inflateReset
+#  define inflateBack           z_inflateBack
+#  define inflateBackEnd        z_inflateBackEnd
+#  define compress              z_compress
+#  define compress2             z_compress2
+#  define compressBound         z_compressBound
+#  define uncompress            z_uncompress
+#  define adler32               z_adler32
+#  define crc32                 z_crc32
+#  define get_crc_table         z_get_crc_table
+#  define zError                z_zError
+
+#  define alloc_func            z_alloc_func
+#  define free_func             z_free_func
+#  define in_func               z_in_func
+#  define out_func              z_out_func
+#  define Byte                  z_Byte
+#  define uInt                  z_uInt
+#  define uLong                 z_uLong
+#  define Bytef                 z_Bytef
+#  define charf                 z_charf
+#  define intf                  z_intf
+#  define uIntf                 z_uIntf
+#  define uLongf                z_uLongf
+#  define voidpf                z_voidpf
+#  define voidp                 z_voidp
+#endif
+
+#if defined(__MSDOS__) && !defined(MSDOS)
+#  define MSDOS
+#endif
+#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2)
+#  define OS2
+#endif
+#if defined(_WINDOWS) && !defined(WINDOWS)
+#  define WINDOWS
+#endif
+#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__)
+#  ifndef WIN32
+#    define WIN32
+#  endif
+#endif
+#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32)
+#  if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__)
+#    ifndef SYS16BIT
+#      define SYS16BIT
+#    endif
+#  endif
+#endif
+
+/*
+ * Compile with -DMAXSEG_64K if the alloc function cannot allocate more
+ * than 64k bytes at a time (needed on systems with 16-bit int).
+ */
+#ifdef SYS16BIT
+#  define MAXSEG_64K
+#endif
+#ifdef MSDOS
+#  define UNALIGNED_OK
+#endif
+
+#ifdef __STDC_VERSION__
+#  ifndef STDC
+#    define STDC
+#  endif
+#  if __STDC_VERSION__ >= 199901L
+#    ifndef STDC99
+#      define STDC99
+#    endif
+#  endif
+#endif
+#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus))
+#  define STDC
+#endif
+#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__))
+#  define STDC
+#endif
+#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32))
+#  define STDC
+#endif
+#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__))
+#  define STDC
+#endif
+
+#if defined(__OS400__) && !defined(STDC)    /* iSeries (formerly AS/400). */
+#  define STDC
+#endif
+
+#ifndef STDC
+#  ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */
+#    define const       /* note: need a more gentle solution here */
+#  endif
+#endif
+
+/* Some Mac compilers merge all .h files incorrectly: */
+#if defined(__MWERKS__)||defined(applec)||defined(THINK_C)||defined(__SC__)
+#  define NO_DUMMY_DECL
+#endif
+
+/* Maximum value for memLevel in deflateInit2 */
+#ifndef MAX_MEM_LEVEL
+#  ifdef MAXSEG_64K
+#    define MAX_MEM_LEVEL 8
+#  else
+#    define MAX_MEM_LEVEL 9
+#  endif
+#endif
+
+/* Maximum value for windowBits in deflateInit2 and inflateInit2.
+ * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files
+ * created by gzip. (Files created by minigzip can still be extracted by
+ * gzip.)
+ */
+#ifndef MAX_WBITS
+#  define MAX_WBITS   15 /* 32K LZ77 window */
+#endif
+
+/* The memory requirements for deflate are (in bytes):
+            (1 << (windowBits+2)) +  (1 << (memLevel+9))
+ that is: 128K for windowBits=15  +  128K for memLevel = 8  (default values)
+ plus a few kilobytes for small objects. For example, if you want to reduce
+ the default memory requirements from 256K to 128K, compile with
+     make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
+ Of course this will generally degrade compression (there's no free lunch).
+
+   The memory requirements for inflate are (in bytes) 1 << windowBits
+ that is, 32K for windowBits=15 (default value) plus a few kilobytes
+ for small objects.
+*/
+
+                        /* Type declarations */
+
+#ifndef OF /* function prototypes */
+#  ifdef STDC
+#    define OF(args)  args
+#  else
+#    define OF(args)  ()
+#  endif
+#endif
+
+/* The following definitions for FAR are needed only for MSDOS mixed
+ * model programming (small or medium model with some far allocations).
+ * This was tested only with MSC; for other MSDOS compilers you may have
+ * to define NO_MEMCPY in zutil.h.  If you don't need the mixed model,
+ * just define FAR to be empty.
+ */
+#ifdef SYS16BIT
+#  if defined(M_I86SM) || defined(M_I86MM)
+     /* MSC small or medium model */
+#    define SMALL_MEDIUM
+#    ifdef _MSC_VER
+#      define FAR _far
+#    else
+#      define FAR far
+#    endif
+#  endif
+#  if (defined(__SMALL__) || defined(__MEDIUM__))
+     /* Turbo C small or medium model */
+#    define SMALL_MEDIUM
+#    ifdef __BORLANDC__
+#      define FAR _far
+#    else
+#      define FAR far
+#    endif
+#  endif
+#endif
+
+#if defined(WINDOWS) || defined(WIN32)
+   /* If building or using zlib as a DLL, define ZLIB_DLL.
+    * This is not mandatory, but it offers a little performance increase.
+    */
+#  ifdef ZLIB_DLL
+#    if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500))
+#      ifdef ZLIB_INTERNAL
+#        define ZEXTERN extern __declspec(dllexport)
+#      else
+#        define ZEXTERN extern __declspec(dllimport)
+#      endif
+#    endif
+#  endif  /* ZLIB_DLL */
+   /* If building or using zlib with the WINAPI/WINAPIV calling convention,
+    * define ZLIB_WINAPI.
+    * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI.
+    */
+#  ifdef ZLIB_WINAPI
+#    ifdef FAR
+#      undef FAR
+#    endif
+#    include <windows.h>
+     /* No need for _export, use ZLIB.DEF instead. */
+     /* For complete Windows compatibility, use WINAPI, not __stdcall. */
+#    define ZEXPORT WINAPI
+#    ifdef WIN32
+#      define ZEXPORTVA WINAPIV
+#    else
+#      define ZEXPORTVA FAR CDECL
+#    endif
+#  endif
+#endif
+
+#if defined (__BEOS__)
+#  ifdef ZLIB_DLL
+#    ifdef ZLIB_INTERNAL
+#      define ZEXPORT   __declspec(dllexport)
+#      define ZEXPORTVA __declspec(dllexport)
+#    else
+#      define ZEXPORT   __declspec(dllimport)
+#      define ZEXPORTVA __declspec(dllimport)
+#    endif
+#  endif
+#endif
+
+#ifndef ZEXTERN
+#  define ZEXTERN extern
+#endif
+#ifndef ZEXPORT
+#  define ZEXPORT
+#endif
+#ifndef ZEXPORTVA
+#  define ZEXPORTVA
+#endif
+
+#ifndef FAR
+#  define FAR
+#endif
+
+#if !defined(__MACTYPES__)
+typedef unsigned char  Byte;  /* 8 bits */
+#endif
+typedef unsigned int   uInt;  /* 16 bits or more */
+typedef unsigned long  uLong; /* 32 bits or more */
+
+#ifdef SMALL_MEDIUM
+   /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */
+#  define Bytef Byte FAR
+#else
+   typedef Byte  FAR Bytef;
+#endif
+typedef char  FAR charf;
+typedef int   FAR intf;
+typedef uInt  FAR uIntf;
+typedef uLong FAR uLongf;
+
+#ifdef STDC
+   typedef void const *voidpc;
+   typedef void FAR   *voidpf;
+   typedef void       *voidp;
+#else
+   typedef Byte const *voidpc;
+   typedef Byte FAR   *voidpf;
+   typedef Byte       *voidp;
+#endif
+
+#if 0           /* HAVE_UNISTD_H -- this line is updated by ./configure */
+#  include <sys/types.h> /* for off_t */
+#  include <unistd.h>    /* for SEEK_* and off_t */
+#  ifdef VMS
+#    include <unixio.h>   /* for off_t */
+#  endif
+#  define z_off_t off_t
+#endif
+#ifndef SEEK_SET
+#  define SEEK_SET        0       /* Seek from beginning of file.  */
+#  define SEEK_CUR        1       /* Seek from current position.  */
+#  define SEEK_END        2       /* Set file pointer to EOF plus "offset" */
+#endif
+#ifndef z_off_t
+#  define z_off_t long
+#endif
+
+#if defined(__OS400__)
+#  define NO_vsnprintf
+#endif
+
+#if defined(__MVS__)
+#  define NO_vsnprintf
+#  ifdef FAR
+#    undef FAR
+#  endif
+#endif
+
+/* MVS linker does not support external names larger than 8 bytes */
+#if defined(__MVS__)
+#   pragma map(deflateInit_,"DEIN")
+#   pragma map(deflateInit2_,"DEIN2")
+#   pragma map(deflateEnd,"DEEND")
+#   pragma map(deflateBound,"DEBND")
+#   pragma map(inflateInit_,"ININ")
+#   pragma map(inflateInit2_,"ININ2")
+#   pragma map(inflateEnd,"INEND")
+#   pragma map(inflateSync,"INSY")
+#   pragma map(inflateSetDictionary,"INSEDI")
+#   pragma map(compressBound,"CMBND")
+#   pragma map(inflate_table,"INTABL")
+#   pragma map(inflate_fast,"INFA")
+#   pragma map(inflate_copyright,"INCOPY")
+#endif
+
+#endif /* ZCONF_H */