Added contents of Tcl 8.1a2

1 files changed, 1964 insertions, 409 deletions

diff --git a/tests/io.test b/tests/io.test
index 2b6670f..2f55660 100644
--- a/tests/io.test
+++ b/tests/io.test
@@ -11,7 +11,7 @@
 # See the file "license.terms" for information on usage and redistribution
 # of this file, and for a DISCLAIMER OF ALL WARRANTIES.
 #
-# SCCS: @(#) io.test 1.131 97/09/22 11:15:05
+# SCCS: @(#) io.test 1.149 98/02/10 17:49:32
 
 if {[string compare test [info procs test]] == 1} then {source defs}
 
@@ -21,6 +21,8 @@ if {"[info commands testchannel]" != "testchannel"} {
     return
 }
 
+saveState
+
 removeFile test1
 removeFile pipe
 
@@ -37,23 +39,22 @@ close $f
 
 set f [open cat w]
 puts $f {
-    if {$argv == {}} {
-	set argv -
-    }
-    foreach name $argv {
-	if {$name == "-"} {
-	    set f stdin
-	} elseif {[catch {open $name r} f] != 0} {
-	    puts stderr $f
-	    continue
-	}
-	while {[eof $f] == 0} {
-	    puts -nonewline stdout [read $f]
-	}
-	if {$f != "stdin"} {
+    set f stdin
+    if {$argv != ""} {
+	set f [open $argv]
+    }
+    fconfigure $f -encoding binary -translation lf -blocking 0 -eofchar \x1a
+    fconfigure stdout -encoding binary -translation lf -buffering none
+    fileevent $f readable "foo $f"
+    proc foo {f} {
+	set x [read $f]
+	catch {puts -nonewline $x}
+	if {[eof $f]} {
 	    close $f
+	    exit 0
 	}
     }
+    vwait forever
 }
 close $f
 
@@ -124,6 +125,1427 @@ close $f
 #    list $c $x
 #} {40 ok}
 
+proc contents {file} {
+    set f [open $file]
+    fconfigure $f -translation binary
+    set a [read $f]
+    close $f
+    return $a
+}
+
+test io-1.1 {Tcl_WriteChars: CheckChannelErrors} {
+    # no test, need to cause an async error.
+} {}
+test io-1.2 {Tcl_WriteChars: WriteBytes} {
+    set f [open test1 w]
+    fconfigure $f -encoding binary
+    puts -nonewline $f "a\u4e4d\0"
+    close $f
+    contents test1
+} "a\x4d\x00"
+test io-1.3 {Tcl_WriteChars: WriteChars} {
+    set f [open test1 w]
+    fconfigure $f -encoding shiftjis
+    puts -nonewline $f "a\u4e4d\0"
+    close $f
+    contents test1
+} "a\x93\xe1\x00"
+
+test io-2.1 {WriteBytes} {
+    # loop until all bytes are written
+    
+    set f [open test1 w]
+    fconfigure $f  -encoding binary -buffersize 16 -translation crlf
+    puts $f "abcdefghijklmnopqrstuvwxyz"
+    close $f
+    contents test1
+} "abcdefghijklmnopqrstuvwxyz\r\n"
+test io-2.2 {WriteBytes: savedLF > 0} {
+    # After flushing buffer, there was a \n left over from the last
+    # \n -> \r\n expansion.  It gets stuck at beginning of this buffer.
+
+    set f [open test1 w]
+    fconfigure $f -encoding binary -buffersize 16 -translation crlf
+    puts -nonewline $f "123456789012345\n12"
+    set x [list [contents test1]]
+    close $f
+    lappend x [contents test1]
+} [list "123456789012345\r" "123456789012345\r\n12"]
+test io-2.3 {WriteBytes: flush on line} {
+    # Tcl "line" buffering has weird behavior: if current buffer contains
+    # a \n, entire buffer gets flushed.  Logical behavior would be to flush
+    # only up to the \n.
+    
+    set f [open test1 w]
+    fconfigure $f -encoding binary -buffering line -translation crlf
+    puts -nonewline $f "\n12"
+    set x [contents test1]
+    close $f
+    set x
+} "\r\n12"
+
+test io-3.1 {WriteChars: compatibility with WriteBytes} {
+    # loop until all bytes are written
+    
+    set f [open test1 w]
+    fconfigure $f -encoding ascii -buffersize 16 -translation crlf
+    puts $f "abcdefghijklmnopqrstuvwxyz"
+    close $f
+    contents test1
+} "abcdefghijklmnopqrstuvwxyz\r\n"
+test io-3.2 {WriteChars: compatibility with WriteBytes: savedLF > 0} {
+    # After flushing buffer, there was a \n left over from the last
+    # \n -> \r\n expansion.  It gets stuck at beginning of this buffer.
+
+    set f [open test1 w]
+    fconfigure $f -encoding ascii -buffersize 16 -translation crlf
+    puts -nonewline $f "123456789012345\n12"
+    set x [list [contents test1]]
+    close $f
+    lappend x [contents test1]
+} [list "123456789012345\r" "123456789012345\r\n12"]
+test io-3.3 {WriteChars: compatibility with WriteBytes: flush on line} {
+    # Tcl "line" buffering has weird behavior: if current buffer contains
+    # a \n, entire buffer gets flushed.  Logical behavior would be to flush
+    # only up to the \n.
+    
+    set f [open test1 w]
+    fconfigure $f -encoding ascii -buffering line -translation crlf
+    puts -nonewline $f "\n12"
+    set x [contents test1]
+    close $f
+    set x
+} "\r\n12"
+test io-3.4 {WriteChars: loop over stage buffer} {
+    # stage buffer maps to more than can be queued at once.
+
+    set f [open test1 w]
+    fconfigure $f -encoding jis0208 -buffersize 16 
+    puts -nonewline $f "\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\"
+    set x [list [contents test1]]
+    close $f
+    lappend x [contents test1]
+} [list "!)!)!)!)!)!)!)!)" "!)!)!)!)!)!)!)!)!)!)!)!)!)!)!)"]
+test io-3.5 {WriteChars: saved != 0} {
+    # Bytes produced by UtfToExternal from end of last channel buffer
+    # had to be moved to beginning of next channel buffer to preserve
+    # requested buffersize.
+
+    set f [open test1 w]
+    fconfigure $f -encoding jis0208 -buffersize 17 
+    puts -nonewline $f "\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\"
+    set x [list [contents test1]]
+    close $f
+    lappend x [contents test1]
+} [list "!)!)!)!)!)!)!)!)!" "!)!)!)!)!)!)!)!)!)!)!)!)!)!)!)"]
+test io-3.6 {WriteChars: (stageRead + dstWrote == 0)} {
+    # One incomplete UTF-8 character at end of staging buffer.  Backup
+    # in src to the beginning of that UTF-8 character and try again.
+    #
+    # Translate the first 16 bytes, produce 14 bytes of output, 2 left over
+    # (first two bytes of \uff21 in UTF-8).  Given those two bytes try
+    # translating them again, find that no bytes are read produced, and break
+    # to outer loop where those two bytes will have the remaining 4 bytes
+    # (the last byte of \uff21 plus the all of \uff22) appended.
+
+    set f [open test1 w]
+    fconfigure $f -encoding shiftjis -buffersize 16
+    puts -nonewline $f "12345678901234\uff21\uff22"
+    set x [list [contents test1]]
+    close $f
+    lappend x [contents test1]
+} [list "12345678901234\x82\x60" "12345678901234\x82\x60\x82\x61"]
+test io-3.7 {WriteChars: (bufPtr->nextAdded > bufPtr->length)} {
+    # When translating UTF-8 to external, the produced bytes went past end
+    # of the channel buffer.  This is done purpose -- we then truncate the
+    # bytes at the end of the partial character to preserve the requested
+    # blocksize on flush.  The truncated bytes are moved to the beginning
+    # of the next channel buffer.
+
+    set f [open test1 w]
+    fconfigure $f -encoding jis0208 -buffersize 17 
+    puts -nonewline $f "\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\"
+    set x [list [contents test1]]
+    close $f
+    lappend x [contents test1]
+} [list "!)!)!)!)!)!)!)!)!" "!)!)!)!)!)!)!)!)!)!)!)!)!)!)!)"]
+
+test io-4.1 {TranslateOutputEOL: lf} {
+    # search for \n
+
+    set f [open test1 w]
+    fconfigure $f -buffering line -translation lf
+    puts $f "abcde"
+    set x [list [contents test1]]
+    close $f
+    lappend x [contents test1]
+} [list "abcde\n" "abcde\n"]
+test io-4.2 {TranslateOutputEOL: cr} {
+    # search for \n, replace with \r
+
+    set f [open test1 w]
+    fconfigure $f -buffering line -translation cr
+    puts $f "abcde"
+    set x [list [contents test1]]
+    close $f
+    lappend x [contents test1]
+} [list "abcde\r" "abcde\r"]
+test io-4.3 {TranslateOutputEOL: crlf} {
+    # simple case: search for \n, replace with \r
+
+    set f [open test1 w]
+    fconfigure $f -buffering line -translation crlf
+    puts $f "abcde"
+    set x [list [contents test1]]
+    close $f
+    lappend x [contents test1]
+} [list "abcde\r\n" "abcde\r\n"]
+test io-4.4 {TranslateOutputEOL: crlf} {
+    # keep storing more bytes in output buffer until output buffer is full.
+    # We have 13 bytes initially that would turn into 18 bytes.  Fill
+    # dest buffer while (dstEnd < dstMax).
+
+    set f [open test1 w]
+    fconfigure $f -translation crlf -buffersize 16
+    puts -nonewline $f "1234567\n\n\n\n\nA"
+    set x [list [contents test1]]
+    close $f
+    lappend x [contents test1]
+} [list "1234567\r\n\r\n\r\n\r\n\r" "1234567\r\n\r\n\r\n\r\n\r\nA"]
+
+test io-5.1 {CheckFlush: not full} {
+    set f [open test1 w]
+    fconfigure $f 
+    puts -nonewline $f "12345678901234567890"
+    set x [list [contents test1]]
+    close $f
+    lappend x [contents test1]
+} [list "" "12345678901234567890"]
+test io-5.2 {CheckFlush: full} {
+    set f [open test1 w]
+    fconfigure $f -buffersize 16
+    puts -nonewline $f "12345678901234567890"
+    set x [list [contents test1]]
+    close $f
+    lappend x [contents test1]
+} [list "1234567890123456" "12345678901234567890"]
+test io-5.3 {CheckFlush: not line} {
+    set f [open test1 w]
+    fconfigure $f -buffering line
+    puts -nonewline $f "12345678901234567890"
+    set x [list [contents test1]]
+    close $f
+    lappend x [contents test1]
+} [list "" "12345678901234567890"]
+test io-5.4 {CheckFlush: line} {
+    set f [open test1 w]
+    fconfigure $f -buffering line -translation lf -encoding ascii
+    puts -nonewline $f "1234567890\n1234567890"
+    set x [list [contents test1]]
+    close $f
+    lappend x [contents test1]
+} [list "1234567890\n1234567890" "1234567890\n1234567890"]
+test io-5.5 {CheckFlush: none} {
+    set f [open test1 w]
+    fconfigure $f -buffering none
+    puts -nonewline $f "1234567890"
+    set x [list [contents test1]]
+    close $f
+    lappend x [contents test1]
+} [list "1234567890" "1234567890"]
+
+test io-6.1 {Tcl_GetsObj: working} {
+    set f [open test1 w]
+    puts $f "foo\nboo"
+    close $f
+    set f [open test1]
+    set x [gets $f]
+    close $f
+    set x
+} {foo}
+test io-6.2 {Tcl_GetsObj: CheckChannelErrors() != 0} {
+    # no test, need to cause an async error.
+} {}
+test io-6.3 {Tcl_GetsObj: how many have we used?} {
+    # if (bufPtr != NULL) {oldRemoved = bufPtr->nextRemoved}
+
+    set f [open test1 w]
+    fconfigure $f -translation crlf
+    puts $f "abc\ndefg"
+    close $f
+    set f [open test1]
+    set x [list [tell $f] [gets $f line] [tell $f] [gets $f line] $line]
+    close $f
+    set x
+} {0 3 5 4 defg}
+test io-6.4 {Tcl_GetsObj: encoding == NULL} {
+    set f [open test1 w]
+    fconfigure $f -translation binary
+    puts $f "\x81\u1234\0"
+    close $f
+    set f [open test1]
+    fconfigure $f -translation binary
+    set x [list [gets $f line] $line]
+    close $f
+    set x
+} [list 3 "\x81\x34\x00"]
+test io-6.5 {Tcl_GetsObj: encoding != NULL} {
+    set f [open test1 w]
+    fconfigure $f -translation binary
+    puts $f "\x88\xea\x92\x9a"
+    close $f
+    set f [open test1]
+    fconfigure $f -encoding shiftjis
+    set x [list [gets $f line] $line]
+    close $f
+    set x
+} [list 2 "\u4e00\u4e01"]
+set a "bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb"
+append a $a
+append a $a
+test io-6.6 {Tcl_GetsObj: loop test} {
+    # if (dst >= dstEnd) 
+
+    set f [open test1 w]
+    puts $f $a
+    puts $f hi
+    close $f
+    set f [open test1]
+    set x [list [gets $f line] $line]
+    close $f
+    set x
+} [list 256 $a]
+test io-6.7 {Tcl_GetsObj: error in input} {stdio} {
+    # if (FilterInputBytes(chanPtr, &gs) != 0)
+
+    set f [open "|[list $tcltest cat]" w+]
+    puts -nonewline $f "hi\nwould"
+    flush $f
+    gets $f
+    fconfigure $f -blocking 0
+    set x [gets $f line]
+    close $f
+    set x
+} {-1}
+test io-6.8 {Tcl_GetsObj: remember if EOF is seen} {
+    set f [open test1 w]
+    puts $f "abcdef\x1aghijk\nwombat"
+    close $f
+    set f [open test1]
+    fconfigure $f -eofchar \x1a
+    set x [list [gets $f line] $line [gets $f line] $line]
+    close $f
+    set x
+} {6 abcdef -1 {}}
+test io-6.9 {Tcl_GetsObj: remember if EOF is seen} {
+    set f [open test1 w]
+    puts $f "abcdefghijk\nwom\u001abat"
+    close $f
+    set f [open test1]
+    fconfigure $f -eofchar \x1a
+    set x [list [gets $f line] $line [gets $f line] $line]
+    close $f
+    set x
+} {11 abcdefghijk 3 wom}
+
+# Comprehensive tests
+
+test io-6.10 {Tcl_GetsObj: lf mode: no chars} {
+    set f [open test1 w]
+    close $f
+    set f [open test1]
+    fconfigure $f -translation lf
+    set x [list [gets $f line] $line]
+    close $f
+    set x
+} {-1 {}}
+test io-6.11 {Tcl_GetsObj: lf mode: lone \n} {
+    set f [open test1 w]
+    fconfigure $f -translation lf
+    puts -nonewline $f "\n"
+    close $f
+    set f [open test1]
+    fconfigure $f -translation lf
+    set x [list [gets $f line] $line [gets $f line] $line]
+    close $f
+    set x
+} {0 {} -1 {}}
+test io-6.12 {Tcl_GetsObj: lf mode: lone \r} {
+    set f [open test1 w]
+    fconfigure $f -translation lf
+    puts -nonewline $f "\r"
+    close $f
+    set f [open test1]
+    fconfigure $f -translation lf
+    set x [list [gets $f line] $line [gets $f line] $line]
+    close $f
+    set x
+} [list 1 "\r" -1 ""]
+test io-6.13 {Tcl_GetsObj: lf mode: 1 char} {
+    set f [open test1 w]
+    fconfigure $f -translation lf
+    puts -nonewline $f a
+    close $f
+    set f [open test1]
+    fconfigure $f -translation lf
+    set x [list [gets $f line] $line [gets $f line] $line]
+    close $f
+    set x
+} {1 a -1 {}}
+test io-6.14 {Tcl_GetsObj: lf mode: 1 char followed by EOL} {
+    set f [open test1 w]
+    fconfigure $f -translation lf
+    puts -nonewline $f "a\n"
+    close $f
+    set f [open test1]
+    fconfigure $f -translation lf
+    set x [list [gets $f line] $line [gets $f line] $line]
+    close $f
+    set x
+} {1 a -1 {}}
+test io-6.15 {Tcl_GetsObj: lf mode: several chars} {
+    set f [open test1 w]
+    fconfigure $f -translation lf
+    puts -nonewline $f "abcd\nefgh\rijkl\r\nmnop"
+    close $f
+    set f [open test1]
+    fconfigure $f -translation lf
+    set x [list [gets $f line] $line [gets $f line] $line [gets $f line] $line [gets $f line] $line]
+    close $f
+    set x
+} [list 4 "abcd" 10 "efgh\rijkl\r" 4 "mnop" -1 ""]
+test io-6.16 {Tcl_GetsObj: cr mode: no chars} {
+    set f [open test1 w]
+    close $f
+    set f [open test1]
+    fconfigure $f -translation cr
+    set x [list [gets $f line] $line]
+    close $f
+    set x
+} {-1 {}}
+test io-6.17 {Tcl_GetsObj: cr mode: lone \n} {
+    set f [open test1 w]
+    fconfigure $f -translation lf
+    puts -nonewline $f "\n"
+    close $f
+    set f [open test1]
+    fconfigure $f -translation cr
+    set x [list [gets $f line] $line [gets $f line] $line]
+    close $f
+    set x
+} [list 1 "\n" -1 ""]
+test io-6.18 {Tcl_GetsObj: cr mode: lone \r} {
+    set f [open test1 w]
+    fconfigure $f -translation lf
+    puts -nonewline $f "\r"
+    close $f
+    set f [open test1]
+    fconfigure $f -translation cr
+    set x [list [gets $f line] $line [gets $f line] $line]
+    close $f
+    set x
+} {0 {} -1 {}}
+test io-6.19 {Tcl_GetsObj: cr mode: 1 char} {
+    set f [open test1 w]
+    fconfigure $f -translation lf
+    puts -nonewline $f a
+    close $f
+    set f [open test1]
+    fconfigure $f -translation cr
+    set x [list [gets $f line] $line [gets $f line] $line]
+    close $f
+    set x
+} {1 a -1 {}}
+test io-6.20 {Tcl_GetsObj: cr mode: 1 char followed by EOL} {
+    set f [open test1 w]
+    fconfigure $f -translation lf
+    puts -nonewline $f "a\r"
+    close $f
+    set f [open test1]
+    fconfigure $f -translation cr
+    set x [list [gets $f line] $line [gets $f line] $line]
+    close $f
+    set x
+} {1 a -1 {}}
+test io-6.21 {Tcl_GetsObj: cr mode: several chars} {
+    set f [open test1 w]
+    fconfigure $f -translation lf
+    puts -nonewline $f "abcd\nefgh\rijkl\r\nmnop"
+    close $f
+    set f [open test1]
+    fconfigure $f -translation cr
+    set x [list [gets $f line] $line [gets $f line] $line [gets $f line] $line [gets $f line] $line]
+    close $f
+    set x
+} [list 9 "abcd\nefgh" 4 "ijkl" 5 "\nmnop" -1 ""]
+test io-6.22 {Tcl_GetsObj: crlf mode: no chars} {
+    set f [open test1 w]
+    close $f
+    set f [open test1]
+    fconfigure $f -translation crlf
+    set x [list [gets $f line] $line]
+    close $f
+    set x
+} {-1 {}}
+test io-6.23 {Tcl_GetsObj: crlf mode: lone \n} {
+    set f [open test1 w]
+    fconfigure $f -translation lf
+    puts -nonewline $f "\n"
+    close $f
+    set f [open test1]
+    fconfigure $f -translation crlf
+    set x [list [gets $f line] $line [gets $f line] $line]
+    close $f
+    set x
+} [list 1 "\n" -1 ""]
+test io-6.24 {Tcl_GetsObj: crlf mode: lone \r} {
+    set f [open test1 w]
+    fconfigure $f -translation lf
+    puts -nonewline $f "\r"
+    close $f
+    set f [open test1]
+    fconfigure $f -translation crlf
+    set x [list [gets $f line] $line [gets $f line] $line]
+    close $f
+    set x
+} [list 1 "\r" -1 ""]
+test io-6.25 {Tcl_GetsObj: crlf mode: \r\r} {
+    set f [open test1 w]
+    fconfigure $f -translation lf
+    puts -nonewline $f "\r\r"
+    close $f
+    set f [open test1]
+    fconfigure $f -translation crlf
+    set x [list [gets $f line] $line [gets $f line] $line]
+    close $f
+    set x
+} [list 2 "\r\r" -1 ""]
+test io-6.26 {Tcl_GetsObj: crlf mode: \r\n} {
+    set f [open test1 w]
+    fconfigure $f -translation lf
+    puts -nonewline $f "\r\n"
+    close $f
+    set f [open test1]
+    fconfigure $f -translation crlf
+    set x [list [gets $f line] $line [gets $f line] $line]
+    close $f
+    set x
+} [list 0 "" -1 ""]
+test io-6.27 {Tcl_GetsObj: crlf mode: 1 char} {
+    set f [open test1 w]
+    fconfigure $f -translation lf
+    puts -nonewline $f a
+    close $f
+    set f [open test1]
+    fconfigure $f -translation crlf
+    set x [list [gets $f line] $line [gets $f line] $line]
+    close $f
+    set x
+} {1 a -1 {}}
+test io-6.28 {Tcl_GetsObj: crlf mode: 1 char followed by EOL} {
+    set f [open test1 w]
+    fconfigure $f -translation lf
+    puts -nonewline $f "a\r\n"
+    close $f
+    set f [open test1]
+    fconfigure $f -translation crlf
+    set x [list [gets $f line] $line [gets $f line] $line]
+    close $f
+    set x
+} {1 a -1 {}}
+test io-6.29 {Tcl_GetsObj: crlf mode: several chars} {
+    set f [open test1 w]
+    fconfigure $f -translation lf
+    puts -nonewline $f "abcd\nefgh\rijkl\r\nmnop"
+    close $f
+    set f [open test1]
+    fconfigure $f -translation crlf
+    set x [list [gets $f line] $line [gets $f line] $line [gets $f line] $line]
+    close $f
+    set x
+} [list 14 "abcd\nefgh\rijkl" 4 "mnop" -1 ""]
+test io-6.30 {Tcl_GetsObj: crlf mode: buffer exhausted} {
+    # if (eol >= dstEnd)
+
+    set f [open test1 w]
+    fconfigure $f -translation lf
+    puts -nonewline $f "123456789012345\r\nabcdefghijklmnoprstuvwxyz"
+    close $f
+    set f [open test1]
+    fconfigure $f -translation crlf -buffersize 16
+    set x [list [gets $f line] $line [testchannel inputbuffered $f]]
+    close $f
+    set x
+} [list 15 "123456789012345" 15]
+test io-6.31 {Tcl_GetsObj: crlf mode: buffer exhausted, blocked} {stdio} {
+    # (FilterInputBytes() != 0)
+
+    set f [open "|[list $tcltest cat]" w+]
+    fconfigure $f -translation {crlf lf} -buffering none
+    puts -nonewline $f "bbbbbbbbbbbbbb\r\n123456789012345\r"
+    fconfigure $f -buffersize 16
+    set x [gets $f]
+    fconfigure $f -blocking 0
+    lappend x [gets $f line] $line [fblocked $f] [testchannel inputbuffered $f]
+    close $f
+    set x
+} [list "bbbbbbbbbbbbbb" -1 "" 1 16]
+test io-6.32 {Tcl_GetsObj: crlf mode: buffer exhausted, more data} {
+    # not (FilterInputBytes() != 0)
+
+    set f [open test1 w]
+    fconfigure $f -translation lf
+    puts -nonewline $f "123456789012345\r\n123"
+    close $f
+    set f [open test1]
+    fconfigure $f -translation crlf -buffersize 16
+    set x [list [gets $f line] $line [tell $f] [testchannel inputbuffered $f]]
+    close $f
+    set x
+} [list 15 "123456789012345" 17 3]
+test io-6.33 {Tcl_GetsObj: crlf mode: buffer exhausted, at eof} {
+    # eol still equals dstEnd
+    
+    set f [open test1 w]
+    fconfigure $f -translation lf
+    puts -nonewline $f "123456789012345\r"
+    close $f
+    set f [open test1]
+    fconfigure $f -translation crlf -buffersize 16
+    set x [list [gets $f line] $line [eof $f]]
+    close $f
+    set x
+} [list 16 "123456789012345\r" 1]
+test io-6.34 {Tcl_GetsObj: crlf mode: buffer exhausted, not followed by \n} {
+    # not (*eol == '\n') 
+    
+    set f [open test1 w]
+    fconfigure $f -translation lf
+    puts -nonewline $f "123456789012345\rabcd\r\nefg"
+    close $f
+    set f [open test1]
+    fconfigure $f -translation crlf -buffersize 16
+    set x [list [gets $f line] $line [tell $f]]
+    close $f
+    set x
+} [list 20 "123456789012345\rabcd" 22]
+test io-6.35 {Tcl_GetsObj: auto mode: no chars} {
+    set f [open test1 w]
+    close $f
+    set f [open test1]
+    fconfigure $f -translation auto
+    set x [list [gets $f line] $line]
+    close $f
+    set x
+} {-1 {}}
+test io-6.36 {Tcl_GetsObj: auto mode: lone \n} {
+    set f [open test1 w]
+    fconfigure $f -translation lf
+    puts -nonewline $f "\n"
+    close $f
+    set f [open test1]
+    fconfigure $f -translation auto
+    set x [list [gets $f line] $line [gets $f line] $line]
+    close $f
+    set x
+} [list 0 "" -1 ""]
+test io-6.37 {Tcl_GetsObj: auto mode: lone \r} {
+    set f [open test1 w]
+    fconfigure $f -translation lf
+    puts -nonewline $f "\r"
+    close $f
+    set f [open test1]
+    fconfigure $f -translation auto
+    set x [list [gets $f line] $line [gets $f line] $line]
+    close $f
+    set x
+} [list 0 "" -1 ""]
+test io-6.38 {Tcl_GetsObj: auto mode: \r\r} {
+    set f [open test1 w]
+    fconfigure $f -translation lf
+    puts -nonewline $f "\r\r"
+    close $f
+    set f [open test1]
+    fconfigure $f -translation auto
+    set x [list [gets $f line] $line [gets $f line] $line [gets $f line] $line]
+    close $f
+    set x
+} [list 0 "" 0 "" -1 ""]
+test io-6.39 {Tcl_GetsObj: auto mode: \r\n} {
+    set f [open test1 w]
+    fconfigure $f -translation lf
+    puts -nonewline $f "\r\n"
+    close $f
+    set f [open test1]
+    fconfigure $f -translation auto
+    set x [list [gets $f line] $line [gets $f line] $line]
+    close $f
+    set x
+} [list 0 "" -1 ""]
+test io-6.40 {Tcl_GetsObj: auto mode: 1 char} {
+    set f [open test1 w]
+    fconfigure $f -translation lf
+    puts -nonewline $f a
+    close $f
+    set f [open test1]
+    fconfigure $f -translation auto
+    set x [list [gets $f line] $line [gets $f line] $line]
+    close $f
+    set x
+} {1 a -1 {}}
+test io-6.41 {Tcl_GetsObj: auto mode: 1 char followed by EOL} {
+    set f [open test1 w]
+    fconfigure $f -translation lf
+    puts -nonewline $f "a\r\n"
+    close $f
+    set f [open test1]
+    fconfigure $f -translation auto
+    set x [list [gets $f line] $line [gets $f line] $line]
+    close $f
+    set x
+} {1 a -1 {}}
+test io-6.42 {Tcl_GetsObj: auto mode: several chars} {
+    set f [open test1 w]
+    fconfigure $f -translation lf
+    puts -nonewline $f "abcd\nefgh\rijkl\r\nmnop"
+    close $f
+    set f [open test1]
+    fconfigure $f -translation auto
+    set x [list [gets $f line] $line [gets $f line] $line]
+    lappend x [gets $f line] $line [gets $f line] $line [gets $f line] $line
+    close $f
+    set x
+} [list 4 "abcd" 4 "efgh" 4 "ijkl" 4 "mnop" -1 ""]
+test io-6.43 {Tcl_GetsObj: input saw cr} {stdio} {
+    # if (chanPtr->flags & INPUT_SAW_CR)
+
+    set f [open "|[list $tcltest cat]" w+]
+    fconfigure $f -translation {auto lf} -buffering none
+    puts -nonewline $f "bbbbbbbbbbbbbbb\n123456789abcdef\r"
+    fconfigure $f -buffersize 16
+    set x [list [gets $f]]
+    fconfigure $f -blocking 0
+    lappend x [gets $f line] $line [testchannel queuedcr $f] 
+    fconfigure $f -blocking 1
+    puts -nonewline $f "\nabcd\refg\x1a"
+    lappend x [gets $f line] $line [testchannel queuedcr $f]
+    lappend x [gets $f line] $line
+    close $f
+    set x
+} [list "bbbbbbbbbbbbbbb" 15 "123456789abcdef" 1 4 "abcd" 0 3 "efg"]
+test io-6.44 {Tcl_GetsObj: input saw cr, not followed by cr} {stdio} {
+    # not (*eol == '\n') 
+
+    set f [open "|[list $tcltest cat]" w+]
+    fconfigure $f -translation {auto lf} -buffering none
+    puts -nonewline $f "bbbbbbbbbbbbbbb\n123456789abcdef\r"
+    fconfigure $f -buffersize 16
+    set x [list [gets $f]]
+    fconfigure $f -blocking 0
+    lappend x [gets $f line] $line [testchannel queuedcr $f] 
+    fconfigure $f -blocking 1
+    puts -nonewline $f "abcd\refg\x1a"
+    lappend x [gets $f line] $line [testchannel queuedcr $f]
+    lappend x [gets $f line] $line
+    close $f
+    set x
+} [list "bbbbbbbbbbbbbbb" 15 "123456789abcdef" 1 4 "abcd" 0 3 "efg"]
+test io-6.45 {Tcl_GetsObj: input saw cr, skip right number of bytes} {stdio} {
+    # Tcl_ExternalToUtf()
+
+    set f [open "|[list $tcltest cat]" w+]
+    fconfigure $f -translation {auto lf} -buffering none
+    fconfigure $f -encoding unicode
+    puts -nonewline $f "bbbbbbbbbbbbbbb\n123456789abcdef\r"
+    fconfigure $f -buffersize 16
+    gets $f
+    fconfigure $f -blocking 0
+    set x [list [gets $f line] $line [testchannel queuedcr $f]]
+    fconfigure $f -blocking 1
+    puts -nonewline $f "\nabcd\refg"
+    lappend x [gets $f line] $line [testchannel queuedcr $f]
+    close $f
+    set x
+} [list 15 "123456789abcdef" 1 4 "abcd" 0]
+test io-6.46 {Tcl_GetsObj: input saw cr, followed by just \n should give eof} {stdio} {
+    # memmove()
+
+    set f [open "|[list $tcltest cat]" w+]
+    fconfigure $f -translation {auto lf} -buffering none
+    puts -nonewline $f "bbbbbbbbbbbbbbb\n123456789abcdef\r"
+    fconfigure $f -buffersize 16
+    gets $f
+    fconfigure $f -blocking 0
+    set x [list [gets $f line] $line [testchannel queuedcr $f]]
+    fconfigure $f -blocking 1
+    puts -nonewline $f "\n\x1a"
+    lappend x [gets $f line] $line [testchannel queuedcr $f]
+    close $f
+    set x
+} [list 15 "123456789abcdef" 1 -1 "" 0]
+test io-6.47 {Tcl_GetsObj: auto mode: \r at end of buffer, peek for \n} {
+    # (eol == dstEnd)
+
+    set f [open test1 w]
+    fconfigure $f -translation lf
+    puts -nonewline $f "123456789012345\r\nabcdefghijklmnopq"
+    close $f
+    set f [open test1]
+    fconfigure $f -translation auto -buffersize 16
+    set x [list [gets $f] [testchannel inputbuffered $f]]
+    close $f
+    set x
+} [list "123456789012345" 15]    
+test io-6.48 {Tcl_GetsObj: auto mode: \r at end of buffer, no more avail} {
+    # PeekAhead() did not get any, so (eol >= dstEnd)
+    
+    set f [open test1 w]
+    fconfigure $f -translation lf
+    puts -nonewline $f "123456789012345\r"
+    close $f
+    set f [open test1]
+    fconfigure $f -translation auto -buffersize 16
+    set x [list [gets $f] [testchannel queuedcr $f]]
+    close $f
+    set x
+} [list "123456789012345" 1]
+test io-6.49 {Tcl_GetsObj: auto mode: \r followed by \n} {
+    # if (*eol == '\n') {skip++}
+    
+    set f [open test1 w]
+    fconfigure $f -translation lf
+    puts -nonewline $f "123456\r\n78901"
+    close $f
+    set f [open test1]
+    set x [list [gets $f] [testchannel queuedcr $f] [tell $f] [gets $f]]
+    close $f
+    set x
+} [list "123456" 0 8 "78901"]
+test io-6.50 {Tcl_GetsObj: auto mode: \r not followed by \n} {
+    # not (*eol == '\n') 
+    
+    set f [open test1 w]
+    fconfigure $f -translation lf
+    puts -nonewline $f "123456\r78901"
+    close $f
+    set f [open test1]
+    set x [list [gets $f] [testchannel queuedcr $f] [tell $f] [gets $f]]
+    close $f
+    set x
+} [list "123456" 0 7 "78901"]
+test io-6.51 {Tcl_GetsObj: auto mode: \n} {
+    # else if (*eol == '\n') {goto gotoeol;}
+    
+    set f [open test1 w]
+    fconfigure $f -translation lf
+    puts -nonewline $f "123456\n78901"
+    close $f
+    set f [open test1]
+    set x [list [gets $f] [tell $f] [gets $f]]
+    close $f
+    set x
+} [list "123456" 7 "78901"]
+test io-6.52 {Tcl_GetsObj: saw EOF character} {
+    # if (eof != NULL)
+
+    set f [open test1 w]
+    fconfigure $f -translation lf
+    puts -nonewline $f "123456\x1ak9012345\r"
+    close $f
+    set f [open test1]
+    fconfigure $f -eofchar \x1a
+    set x [list [gets $f] [testchannel queuedcr $f] [tell $f] [gets $f]]
+    close $f
+    set x
+} [list "123456" 0 6 ""]
+test io-6.53 {Tcl_GetsObj: device EOF} {
+    # didn't produce any bytes
+
+    set f [open test1 w]
+    close $f
+    set f [open test1]
+    set x [list [gets $f line] $line [eof $f]]
+    close $f
+    set x
+} {-1 {} 1}
+test io-6.54 {Tcl_GetsObj: device EOF} {
+    # got some bytes before EOF.
+
+    set f [open test1 w]
+    puts -nonewline $f abc
+    close $f
+    set f [open test1]
+    set x [list [gets $f line] $line [eof $f]]
+    close $f
+    set x
+} {3 abc 1}
+test io-6.55 {Tcl_GetsObj: overconverted} {
+    # Tcl_ExternalToUtf(), make sure state updated
+
+    set f [open test1 w]
+    fconfigure $f -encoding iso2022-jp
+    puts $f "there\u4e00ok\n\u4e01more bytes\nhere"
+    close $f
+    set f [open test1]
+    fconfigure $f -encoding iso2022-jp
+    set x [list [gets $f line] $line [gets $f line] $line [gets $f line] $line]
+    close $f
+    set x
+} [list 8 "there\u4e00ok" 11 "\u4e01more bytes" 4 "here"]
+test io-6.56 {Tcl_GetsObj: incomplete lines should disable file events} {stdio} {
+    update
+    set f [open "|[list $tcltest cat]" w+]
+    fconfigure $f -buffering none
+    puts -nonewline $f "foobar"
+    fconfigure $f -blocking 0
+    set x {}
+    after 500 { lappend x timeout }
+    fileevent $f readable { lappend x [gets $f] }
+    vwait x
+    vwait x
+    fconfigure $f -blocking 1
+    puts -nonewline $f "baz\n"
+    after 500 { lappend x timeout }
+    fconfigure $f -blocking 0
+    vwait x
+    vwait x
+    close $f
+    set x
+} {{} timeout foobarbaz timeout}
+
+test io-7.1 {FilterInputBytes: split up character at end of buffer} {
+    # (result == TCL_CONVERT_MULTIBYTE)
+
+    set f [open test1 w]
+    fconfigure $f -encoding shiftjis
+    puts $f "1234567890123\uff10\uff11\uff12\uff13\uff14\nend"
+    close $f
+    set f [open test1]
+    fconfigure $f -encoding shiftjis -buffersize 16
+    set x [gets $f]
+    close $f
+    set x
+} "1234567890123\uff10\uff11\uff12\uff13\uff14"
+test io-7.2 {FilterInputBytes: split up character in middle of buffer} {
+    # (bufPtr->nextAdded < bufPtr->bufLength)
+    
+    set f [open test1 w]
+    fconfigure $f -encoding binary
+    puts -nonewline $f "1234567890\n123\x82\x4f\x82\x50\x82"
+    close $f
+    set f [open test1]
+    fconfigure $f -encoding shiftjis
+    set x [list [gets $f line] $line [eof $f]]
+    close $f
+    set x
+} [list 10 "1234567890" 0]
+test io-7.3 {FilterInputBytes: split up character at EOF} {
+    set f [open test1 w]
+    fconfigure $f -encoding binary
+    puts -nonewline $f "1234567890123\x82\x4f\x82\x50\x82"
+    close $f
+    set f [open test1]
+    fconfigure $f -encoding shiftjis
+    set x [list [gets $f line] $line]
+    lappend x [tell $f] [testchannel inputbuffered $f] [eof $f]
+    lappend x [gets $f line] $line
+    close $f
+    set x
+} [list 15 "1234567890123\uff10\uff11" 18 0 1 -1 ""]
+test io-7.4 {FilterInputBytes: recover from split up character} {stdio} {
+    set f [open "|[list $tcltest cat]" w+]
+    fconfigure $f -encoding binary -buffering none
+    puts -nonewline $f "1234567890123\x82\x4f\x82\x50\x82"
+    fconfigure $f -encoding shiftjis -blocking 0
+    fileevent $f read "ready $f"
+    set x {}
+    proc ready {f} {
+	lappend ::x [gets $f line] $line [fblocked $f]
+    }
+    vwait x
+    fconfigure $f -encoding binary -blocking 1
+    puts $f "\x51\x82\x52"
+    fconfigure $f -encoding shiftjis -blocking 0
+    vwait x
+    close $f
+    set x
+} [list -1 "" 1 17 "1234567890123\uff10\uff11\uff12\uff13" 0]
+
+test io-8.1 {PeekAhead: only go to device if no more cached data} {
+    # (bufPtr->nextPtr == NULL)
+
+    set f [open "test1" w]
+    fconfigure $f -encoding ascii -translation lf
+    puts -nonewline $f "123456789012345\r\n2345678"
+    close $f
+    set f [open "test1"]
+    fconfigure $f -encoding ascii -translation auto -buffersize 16
+    # here
+    gets $f
+    set x [testchannel inputbuffered $f]
+    close $f
+    set x
+} "7"
+test io-8.2 {PeekAhead: only go to device if no more cached data} {stdio} {
+    # not (bufPtr->nextPtr == NULL)
+
+    set f [open "|[list $tcltest cat]" w+]
+    fconfigure $f -translation lf -encoding ascii -buffering none
+    puts -nonewline $f "123456789012345\r\nbcdefghijklmnopqrstuvwxyz"
+    set x {}
+    fileevent $f read "ready $f"
+    proc ready {f} {
+	lappend ::x [gets $f line] $line [testchannel inputbuffered $f]
+    }
+    fconfigure $f -encoding unicode -buffersize 16 -blocking 0
+    vwait x
+    fconfigure $f -translation auto -encoding ascii -blocking 1
+    # here
+    vwait x
+    close $f
+    set x
+} [list -1 "" 42 15 "123456789012345" 25]
+test io-8.3 {PeekAhead: no cached data available} {stdio} {
+    # (bytesLeft == 0)
+
+    set f [open "|[list $tcltest cat]" w+]
+    fconfigure $f -translation {auto binary}
+    puts -nonewline $f "abcdefghijklmno\r"
+    flush $f
+    set x [list [gets $f line] $line [testchannel queuedcr $f]]
+    close $f
+    set x
+} [list 15 "abcdefghijklmno" 1]
+set a "123456789012345678901234567890"
+append a "123456789012345678901234567890"
+append a "1234567890123456789012345678901"
+test io-8.4 {PeekAhead: cached data available in this buffer} {
+    # not (bytesLeft == 0)
+
+    set f [open test1 w+]
+    fconfigure $f -translation binary
+    puts $f "${a}\r\nabcdef"
+    close $f
+    set f [open test1]
+    fconfigure $f -encoding binary -translation auto
+
+    # "${a}\r" was converted in one operation (because ENCODING_LINESIZE
+    # is 30).  To check if "\n" follows, calls PeekAhead and determines
+    # that cached data is available in buffer w/o having to call driver.
+
+    set x [gets $f]
+    close $f
+    set x    
+} $a
+unset a
+test io-8.5 {PeekAhead: don't peek if last read was short} {stdio} {
+    # (bufPtr->nextAdded < bufPtr->length)
+
+    set f [open "|[list $tcltest cat]" w+]
+    fconfigure $f -translation {auto binary}
+    puts -nonewline $f "abcdefghijklmno\r"
+    flush $f
+    # here
+    set x [list [gets $f line] $line [testchannel queuedcr $f]]
+    close $f
+    set x
+} {15 abcdefghijklmno 1}
+test io-8.6 {PeekAhead: change to non-blocking mode} {stdio} {
+    # ((chanPtr->flags & CHANNEL_NONBLOCKING) == 0) 
+
+    set f [open "|[list $tcltest cat]" w+]
+    fconfigure $f -translation {auto binary} -buffersize 16
+    puts -nonewline $f "abcdefghijklmno\r"
+    flush $f
+    # here
+    set x [list [gets $f line] $line [testchannel queuedcr $f]]
+    close $f
+    set x
+} {15 abcdefghijklmno 1}
+test io-8.7 {PeekAhead: cleanup} {stdio} {
+    # Make sure bytes are removed from buffer.
+
+    set f [open "|[list $tcltest cat]" w+]
+    fconfigure $f -translation {auto binary} -buffering none
+    puts -nonewline $f "abcdefghijklmno\r"
+    # here
+    set x [list [gets $f line] $line [testchannel queuedcr $f]]
+    puts -nonewline $f "\x1a"
+    lappend x [gets $f line] $line
+    close $f
+    set x
+} {15 abcdefghijklmno 1 -1 {}}
+    
+
+test io-9.1 {CommonGetsCleanup} {
+} {}
+
+test io-10.1 {Tcl_ReadChars: CheckChannelErrors} {
+    # no test, need to cause an async error.
+} {}
+test io-10.2 {Tcl_ReadChars: loop until enough copied} {
+    # one time
+    # for (copied = 0; (unsigned) toRead > 0; )
+
+    set f [open "test1" w]
+    puts $f abcdefghijklmnop
+    close $f
+
+    set f [open "test1"]
+    set x [read $f 5]
+    close $f
+    set x
+} {abcde}
+test io-10.3 {Tcl_ReadChars: loop until enough copied} {
+    # multiple times
+    # for (copied = 0; (unsigned) toRead > 0; )
+
+    set f [open "test1" w]
+    puts $f abcdefghijklmnopqrstuvwxyz
+    close $f
+
+    set f [open "test1"]
+    fconfigure $f -buffersize 16
+    # here
+    set x [read $f 19]
+    close $f
+    set x
+} {abcdefghijklmnopqrs}
+test io-10.4 {Tcl_ReadChars: no more in channel buffer} {
+    # (copiedNow < 0)
+
+    set f [open "test1" w]
+    puts -nonewline $f abcdefghijkl
+    close $f
+
+    set f [open "test1"]
+    # here
+    set x [read $f 1000]
+    close $f
+    set x
+} {abcdefghijkl}
+test io-10.5 {Tcl_ReadChars: stop on EOF} {
+    # (chanPtr->flags & CHANNEL_EOF)
+
+    set f [open "test1" w]
+    puts -nonewline $f abcdefghijkl
+    close $f
+
+    set f [open "test1"]
+    # here
+    set x [read $f 1000]
+    close $f
+    set x
+} {abcdefghijkl}
+
+test io-11.1 {ReadBytes: want to read a lot} {
+    # ((unsigned) toRead > (unsigned) srcLen)
+
+    set f [open "test1" w]
+    puts -nonewline $f abcdefghijkl
+    close $f
+    set f [open "test1"]
+    fconfigure $f -encoding binary
+    # here
+    set x [read $f 1000]
+    close $f
+    set x
+} {abcdefghijkl}
+test io-11.2 {ReadBytes: want to read all} {
+    # ((unsigned) toRead > (unsigned) srcLen)
+
+    set f [open "test1" w]
+    puts -nonewline $f abcdefghijkl
+    close $f
+    set f [open "test1"]
+    fconfigure $f -encoding binary
+    # here
+    set x [read $f]
+    close $f
+    set x
+} {abcdefghijkl}
+test io-11.3 {ReadBytes: allocate more space} {
+    # (toRead > length - offset - 1)
+
+    set f [open "test1" w]
+    puts -nonewline $f abcdefghijklmnopqrstuvwxyz
+    close $f
+    set f [open "test1"]
+    fconfigure $f -buffersize 16 -encoding binary
+    # here
+    set x [read $f]
+    close $f
+    set x
+} {abcdefghijklmnopqrstuvwxyz}
+test io-11.4 {ReadBytes: EOF char found} {
+    # (TranslateInputEOL() != 0)
+
+    set f [open "test1" w]
+    puts $f abcdefghijklmnopqrstuvwxyz
+    close $f
+    set f [open "test1"]
+    fconfigure $f -eofchar m -encoding binary
+    # here
+    set x [list [read $f] [eof $f] [read $f] [eof $f]]
+    close $f
+    set x
+} [list "abcdefghijkl" 1 "" 1]
+    
+test io-12.1 {ReadChars: want to read a lot} {
+    # ((unsigned) toRead > (unsigned) srcLen)
+
+    set f [open "test1" w]
+    puts -nonewline $f abcdefghijkl
+    close $f
+    set f [open "test1"]
+    # here
+    set x [read $f 1000]
+    close $f
+    set x
+} {abcdefghijkl}
+test io-12.2 {ReadChars: want to read all} {
+    # ((unsigned) toRead > (unsigned) srcLen)
+
+    set f [open "test1" w]
+    puts -nonewline $f abcdefghijkl
+    close $f
+    set f [open "test1"]
+    # here
+    set x [read $f]
+    close $f
+    set x
+} {abcdefghijkl}
+test io-12.3 {ReadChars: allocate more space} {
+    # (toRead > length - offset - 1)
+
+    set f [open "test1" w]
+    puts -nonewline $f abcdefghijklmnopqrstuvwxyz
+    close $f
+    set f [open "test1"]
+    fconfigure $f -buffersize 16
+    # here
+    set x [read $f]
+    close $f
+    set x
+} {abcdefghijklmnopqrstuvwxyz}
+test io-12.4 {ReadChars: split-up char} {stdio} {
+    # (srcRead == 0)
+
+    set f [open "|[list $tcltest cat]" w+]
+    fconfigure $f -encoding binary -buffering none -buffersize 16
+    puts -nonewline $f "123456789012345\x96"
+    fconfigure $f -encoding shiftjis -blocking 0
+
+    fileevent $f read "ready $f"
+    proc ready {f} {
+	lappend ::x [read $f] [testchannel inputbuffered $f]
+    }
+    set x {}
+
+    fconfigure $f -encoding shiftjis
+    vwait x
+    fconfigure $f -encoding binary -blocking 1
+    puts -nonewline $f "\x7b"
+    fconfigure $f -encoding shiftjis -blocking 0
+    vwait x
+    close $f
+    set x
+} [list "123456789012345" 1 "\u672c" 0]
+test io-12.5 {ReadChars: fileevents on partial characters} {stdio} {
+    set f [open test1 w]
+    puts $f {
+	fconfigure stdout -encoding binary -buffering none
+	gets stdin; puts -nonewline "\xe7"
+	gets stdin; puts -nonewline "\x89"
+	gets stdin; puts -nonewline "\xa6"
+    }
+    close $f
+    set f [open "|[list $tcltest test1]" r+]
+    fileevent $f readable {
+	lappend x [read $f]
+	if {[eof $f]} {
+	    lappend x eof
+	}
+    }
+    puts $f "go1"
+    flush $f
+    fconfigure $f -blocking 0 -encoding utf-8
+    set x {}
+    vwait x
+    after 500 { lappend x timeout }
+    vwait x
+    puts $f "go2"
+    flush $f
+    vwait x
+    after 500 { lappend x timeout }
+    vwait x
+    puts $f "go3"
+    flush $f
+    vwait x
+    vwait x
+    lappend x [catch {close $f} msg] $msg
+    set x
+} "{} timeout {} timeout \u7266 {} eof 0 {}"
+
+test io-13.1 {TranslateInputEOL: cr mode} {
+    set f [open test1 w]
+    fconfigure $f -translation lf
+    puts -nonewline $f "abcd\rdef\r"
+    close $f
+    set f [open test1]
+    fconfigure $f -translation cr
+    set x [read $f]
+    close $f
+    set x
+} "abcd\ndef\n"
+test io-13.2 {TranslateInputEOL: crlf mode} {
+    set f [open test1 w]
+    fconfigure $f -translation lf
+    puts -nonewline $f "abcd\r\ndef\r\n"
+    close $f
+    set f [open test1]
+    fconfigure $f -translation crlf
+    set x [read $f]
+    close $f
+    set x
+} "abcd\ndef\n"
+test io-13.3 {TranslateInputEOL: crlf mode: naked cr} {
+    # (src >= srcMax) 
+
+    set f [open test1 w]
+    fconfigure $f -translation lf
+    puts -nonewline $f "abcd\r\ndef\r"
+    close $f
+    set f [open test1]
+    fconfigure $f -translation crlf
+    set x [read $f]
+    close $f
+    set x
+} "abcd\ndef\r"
+test io-13.4 {TranslateInputEOL: crlf mode: cr followed by not \n} {
+    # (src >= srcMax) 
+
+    set f [open test1 w]
+    fconfigure $f -translation lf
+    puts -nonewline $f "abcd\r\ndef\rfgh"
+    close $f
+    set f [open test1]
+    fconfigure $f -translation crlf
+    set x [read $f]
+    close $f
+    set x
+} "abcd\ndef\rfgh"
+test io-13.5 {TranslateInputEOL: crlf mode: naked lf} {
+    # (src >= srcMax) 
+
+    set f [open test1 w]
+    fconfigure $f -translation lf
+    puts -nonewline $f "abcd\r\ndef\nfgh"
+    close $f
+    set f [open test1]
+    fconfigure $f -translation crlf
+    set x [read $f]
+    close $f
+    set x
+} "abcd\ndef\nfgh"
+test io-13.6 {TranslateInputEOL: auto mode: saw cr in last segment} {stdio} {
+    # (chanPtr->flags & INPUT_SAW_CR)
+
+    set f [open "|[list $tcltest cat]" w+]
+    fconfigure $f -blocking 0 -buffering none -translation {auto lf}
+
+    fileevent $f read "ready $f"
+    proc ready {f} {
+	lappend ::x [read $f] [testchannel queuedcr $f]
+    }
+    set x {}
+
+    puts -nonewline $f "abcdefghj\r"
+    vwait x
+
+    puts -nonewline $f "\n01234"
+    vwait x
+
+    close $f
+    set x
+} [list "abcdefghj\n" 1 "01234" 0]
+test io-13.7 {TranslateInputEOL: auto mode: naked \r} {
+    # (src >= srcMax)
+
+    set f [open test1 w]
+    fconfigure $f -translation lf
+    puts -nonewline $f "abcd\r"
+    close $f
+    set f [open test1]
+    fconfigure $f -translation auto
+    set x [list [read $f] [testchannel queuedcr $f]]
+    close $f
+    set x
+} [list "abcd\n" 1]
+test io-13.8 {TranslateInputEOL: auto mode: \r\n} {
+    # (*src == '\n')
+
+    set f [open test1 w]
+    fconfigure $f -translation lf
+    puts -nonewline $f "abcd\r\ndef"
+    close $f
+    set f [open test1]
+    fconfigure $f -translation auto
+    set x [read $f]
+    close $f
+    set x
+} "abcd\ndef"
+test io-13.9 {TranslateInputEOL: auto mode: \r followed by not \n} {
+    set f [open test1 w]
+    fconfigure $f -translation lf
+    puts -nonewline $f "abcd\rdef"
+    close $f
+    set f [open test1]
+    fconfigure $f -translation auto
+    set x [read $f]
+    close $f
+    set x
+} "abcd\ndef"
+test io-13.10 {TranslateInputEOL: auto mode: \n} {
+    # not (*src == '\r') 
+
+    set f [open test1 w]
+    fconfigure $f -translation lf
+    puts -nonewline $f "abcd\ndef"
+    close $f
+    set f [open test1]
+    fconfigure $f -translation auto
+    set x [read $f]
+    close $f
+    set x
+} "abcd\ndef"
+test io-13.11 {TranslateInputEOL: EOF char} {
+    # (*chanPtr->inEofChar != '\0')
+
+    set f [open test1 w]
+    fconfigure $f -translation lf
+    puts -nonewline $f "abcd\ndefgh"
+    close $f
+    set f [open test1]
+    fconfigure $f -translation auto -eofchar e
+    set x [read $f]
+    close $f
+    set x
+} "abcd\nd"
+test io-13.12 {TranslateInputEOL: find EOF char in src} {
+    # (*chanPtr->inEofChar != '\0')
+
+    set f [open test1 w]
+    fconfigure $f -translation lf
+    puts -nonewline $f "\r\n\r\n\r\nab\r\n\r\ndef\r\n\r\n\r\n"
+    close $f
+    set f [open test1]
+    fconfigure $f -translation auto -eofchar e
+    set x [read $f]
+    close $f
+    set x
+} "\n\n\nab\n\nd"
+    
 # Test standard handle management. The functions tested are
 # Tcl_SetStdChannel and Tcl_GetStdChannel. Incidentally we are
 # also testing channel table management.
@@ -133,7 +1555,7 @@ if {$tcl_platform(platform) == "macintosh"} {
 } else {
     set consoleFileNames [lsort [testchannel open]]
 }
-test io-1.1 {Tcl_SetStdChannel and Tcl_GetStdChannel} {
+test io-14.1 {Tcl_SetStdChannel and Tcl_GetStdChannel} {
     set l ""
     lappend l [fconfigure stdin -buffering]
     lappend l [fconfigure stdout -buffering]
@@ -141,7 +1563,7 @@ test io-1.1 {Tcl_SetStdChannel and Tcl_GetStdChannel} {
     lappend l [lsort [testchannel open]]
     set l
 } [list line line none $consoleFileNames]
-test io-1.2 {Tcl_SetStdChannel and Tcl_GetStdChannel} {
+test io-14.2 {Tcl_SetStdChannel and Tcl_GetStdChannel} {
     interp create x
     set l ""
     lappend l [x eval {fconfigure stdin -buffering}]
@@ -150,7 +1572,7 @@ test io-1.2 {Tcl_SetStdChannel and Tcl_GetStdChannel} {
     interp delete x
     set l
 } {line line none}
-test io-1.3 {Tcl_SetStdChannel & Tcl_GetStdChannel} {stdio} {
+test io-14.3 {Tcl_SetStdChannel & Tcl_GetStdChannel} {stdio} {
     set f [open test1 w]
     puts $f {
 	close stdin
@@ -179,7 +1601,7 @@ out
 } {err
 }}
 # This test relies on the fact that the smallest available fd is used first.
-test io-1.4 {Tcl_SetStdChannel & Tcl_GetStdChannel} {unixOnly} {
+test io-14.4 {Tcl_SetStdChannel & Tcl_GetStdChannel} {unixOnly} {
     set f [open test1 w]
     puts $f { close stdin
 	close stdout
@@ -207,7 +1629,7 @@ file1
 } {file2
 }}
 catch {interp delete z}
-test io-1.5 {Tcl_GetChannel: stdio name translation} {
+test io-14.5 {Tcl_GetChannel: stdio name translation} {
     interp create z
     eof stdin
     catch {z eval flush stdin} msg1
@@ -217,7 +1639,7 @@ test io-1.5 {Tcl_GetChannel: stdio name translation} {
     interp delete z
     set result
 } {{channel "stdin" wasn't opened for writing} {} {can not find channel named "stdin"}}
-test io-1.6 {Tcl_GetChannel: stdio name translation} {
+test io-14.6 {Tcl_GetChannel: stdio name translation} {
     interp create z
     eof stdout
     catch {z eval flush stdout} msg1
@@ -227,7 +1649,7 @@ test io-1.6 {Tcl_GetChannel: stdio name translation} {
     interp delete z
     set result
 } {{} {} {can not find channel named "stdout"}}
-test io-1.7 {Tcl_GetChannel: stdio name translation} {
+test io-14.7 {Tcl_GetChannel: stdio name translation} {
     interp create z
     eof stderr
     catch {z eval flush stderr} msg1
@@ -237,7 +1659,7 @@ test io-1.7 {Tcl_GetChannel: stdio name translation} {
     interp delete z
     set result
 } {{} {} {can not find channel named "stderr"}}
-test io-1.8 {reuse of stdio special channels} {unixOnly} {
+test io-14.8 {reuse of stdio special channels} {stdio} {
     removeFile script
     removeFile test1
     set f [open script w]
@@ -255,7 +1677,7 @@ test io-1.8 {reuse of stdio special channels} {unixOnly} {
     close $f
     set c
 } hello
-test io-1.9 {reuse of stdio special channels} {stdio} {
+test io-14.9 {reuse of stdio special channels} {stdio} {
     removeFile script
     removeFile test1
     set f [open script w]
@@ -274,8 +1696,11 @@ test io-1.9 {reuse of stdio special channels} {stdio} {
     set c
 } hello
 
-# Must add test function for testing Tcl_CreateCloseHandler and
-# Tcl_DeleteCloseHandler.
+test io-15.1 {Tcl_CreateCloseHandler} {
+} {}
+
+test io-16.1 {Tcl_DeleteCloseHandler} {
+} {}
 
 # Test channel table management. The functions tested are
 # GetChannelTable, DeleteChannelTable, Tcl_RegisterChannel,
@@ -284,7 +1709,7 @@ test io-1.9 {reuse of stdio special channels} {stdio} {
 # These functions use "eof stdin" to ensure that the standard
 # channels are added to the channel table of the interpreter.
 
-test io-2.1 {GetChannelTable, DeleteChannelTable on std handles} {
+test io-17.1 {GetChannelTable, DeleteChannelTable on std handles} {
     set l1 [testchannel refcount stdin]
     eof stdin
     interp create x
@@ -296,7 +1721,7 @@ test io-2.1 {GetChannelTable, DeleteChannelTable on std handles} {
     lappend l [expr [testchannel refcount stdin] - $l1]
     set l
 } {0 1 0}
-test io-2.2 {GetChannelTable, DeleteChannelTable on std handles} {
+test io-17.2 {GetChannelTable, DeleteChannelTable on std handles} {
     set l1 [testchannel refcount stdout]
     eof stdin
     interp create x
@@ -308,7 +1733,7 @@ test io-2.2 {GetChannelTable, DeleteChannelTable on std handles} {
     lappend l [expr [testchannel refcount stdout] - $l1]
     set l
 } {0 1 0}
-test io-2.3 {GetChannelTable, DeleteChannelTable on std handles} {
+test io-17.3 {GetChannelTable, DeleteChannelTable on std handles} {
     set l1 [testchannel refcount stderr]
     eof stdin
     interp create x
@@ -320,7 +1745,8 @@ test io-2.3 {GetChannelTable, DeleteChannelTable on std handles} {
     lappend l [expr [testchannel refcount stderr] - $l1]
     set l
 } {0 1 0}
-test io-2.4 {Tcl_RegisterChannel, Tcl_UnregisterChannel} {
+
+test io-18.1 {Tcl_RegisterChannel, Tcl_UnregisterChannel} {
     removeFile test1
     set l ""
     set f [open test1 w]
@@ -334,7 +1760,7 @@ test io-2.4 {Tcl_RegisterChannel, Tcl_UnregisterChannel} {
     string compare [string tolower $l] \
 	[list 1 [format "can not find channel named \"%s\"" $f]]
 } 0
-test io-2.5 {Tcl_RegisterChannel, Tcl_UnregisterChannel} {
+test io-18.2 {Tcl_RegisterChannel, Tcl_UnregisterChannel} {
     removeFile test1
     set l ""
     set f [open test1 w]
@@ -355,7 +1781,7 @@ test io-2.5 {Tcl_RegisterChannel, Tcl_UnregisterChannel} {
     string compare [string tolower $l] \
 	[list 1 2 1 1 [format "can not find channel named \"%s\"" $f]]
 } 0
-test io-2.6 {Tcl_RegisterChannel, Tcl_UnregisterChannel} {
+test io-18.3 {Tcl_RegisterChannel, Tcl_UnregisterChannel} {
     removeFile test1
     set l ""
     set f [open test1 w]
@@ -374,20 +1800,21 @@ test io-2.6 {Tcl_RegisterChannel, Tcl_UnregisterChannel} {
     string compare [string tolower $l] \
 	[list 1 2 1 [format "can not find channel named \"%s\"" $f]]
 } 0
-test io-2.7 {Tcl_GetChannel->Tcl_GetStdChannel, standard handles} {
+
+test io-19.1 {Tcl_GetChannel->Tcl_GetStdChannel, standard handles} {
     eof stdin
 } 0
-test io-2.8 {testing Tcl_GetChannel, user opened handle} {
+test io-19.2 {testing Tcl_GetChannel, user opened handle} {
     removeFile test1
     set f [open test1 w]
     set x [eof $f]
     close $f
     set x
 } 0
-test io-2.9 {Tcl_GetChannel, channel not found} {
+test io-19.3 {Tcl_GetChannel, channel not found} {
     list [catch {eof file34} msg] $msg
 } {1 {can not find channel named "file34"}}
-test io-2.10 {Tcl_CreateChannel, insertion into channel table} {
+test io-19.4 {Tcl_CreateChannel, insertion into channel table} {
     removeFile test1
     set f [open test1 w]
     set l ""
@@ -402,27 +1829,79 @@ test io-2.10 {Tcl_CreateChannel, insertion into channel table} {
 	[list 0 [format "can not find channel named \"%s\"" $f]]
 } 0
 
+test io-20.1 {Tcl_CreateChannel: initial settings} {
+	set a [open test2 w]
+    set old [testencoding system]
+    testencoding system ascii
+    set f [open test1 w]
+    set x [fconfigure $f -encoding]
+    close $f
+    testencoding system $old
+	close $a
+    set x
+} {ascii}    
+test io-20.2 {Tcl_CreateChannel: initial settings} {pc} {
+    set f [open test1 w+]
+    set x [list [fconfigure $f -eofchar] [fconfigure $f -translation]]
+    close $f
+    set x
+} [list [list \x1a ""] {auto crlf}]
+test io-20.3 {Tcl_CreateChannel: initial settings} {unix} {
+    set f [open test1 w+]
+    set x [list [fconfigure $f -eofchar] [fconfigure $f -translation]]
+    close $f
+    set x
+} {{{} {}} {auto lf}}
+test io-20.4 {Tcl_CreateChannel: initial settings} {mac} {
+    set f [open test1 w+]
+    set x [list [fconfigure $f -eofchar] [fconfigure $f -translation]]
+    close $f
+    set x
+} {{{} {}} {auto cr}}
+test io-20.5 {Tcl_CreateChannel: install channel in empty slot} {stdio} {
+    set f [open script w]
+    puts $f {
+	close stdout
+	set f1 [open stdout w]
+	fconfigure $f1 -buffersize 777
+	puts stderr [fconfigure stdout -buffersize]
+    }
+    close $f
+    set f [open "|[list $tcltest script]"]
+    catch {close $f} msg
+    set msg
+} {777}
+	
+test io-21.1 {CloseChannelsOnExit} {
+} {}
+    
 # Test management of attributes associated with a channel, such as
 # its default translation, its name and type, etc. The functions
 # tested in this group are Tcl_GetChannelName,
 # Tcl_GetChannelType and Tcl_GetChannelFile. Tcl_GetChannelInstanceData
 # not tested because files do not use the instance data.
 
-test io-3.1 {Tcl_GetChannelName} {
+test io-22.1 {Tcl_GetChannelMode} {
+    # Not used anywhere in Tcl.
+} {}
+
+test io-23.1 {Tcl_GetChannelName} {
     removeFile test1
     set f [open test1 w]
     set n [testchannel name $f]
     close $f
     string compare $n $f
 } 0
-test io-3.2 {Tcl_GetChannelType} {
+
+test io-24.1 {Tcl_GetChannelType} {
     removeFile test1
     set f [open test1 w]
     set t [testchannel type $f]
     close $f
     string compare $t file
 } 0
-test io-3.3 {Tcl_GetChannelFile, input} {
+
+test io-25.1 {Tcl_GetChannelHandle, input} {
     set f [open test1 w]
     fconfigure $f -translation lf -eofchar {}
     puts $f "1234567890\n098765432"
@@ -435,7 +1914,7 @@ test io-3.3 {Tcl_GetChannelFile, input} {
     close $f
     set l
 } {10 11}
-test io-3.4 {Tcl_GetChannelFile, output} {
+test io-25.2 {Tcl_GetChannelHandle, output} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation lf
@@ -451,9 +1930,18 @@ test io-3.4 {Tcl_GetChannelFile, output} {
     set l
 } {6 6 0 6}
 
+test io-26.1 {Tcl_GetChannelInstanceData} {stdio} {
+    # "pid" command uses Tcl_GetChannelInstanceData
+    # Don't care what pid is (but must be a number), just want to exercise it.
+
+    set f [open "|[list $tcltest << exit]"]
+    expr [pid $f]
+    close $f
+} {}    
+
 # Test flushing. The functions tested here are FlushChannel.
 
-test io-4.1 {FlushChannel, no output buffered} {
+test io-27.1 {FlushChannel, no output buffered} {
     removeFile test1
     set f [open test1 w]
     flush $f
@@ -461,7 +1949,7 @@ test io-4.1 {FlushChannel, no output buffered} {
     close $f
     set s
 } 0
-test io-4.2 {FlushChannel, some output buffered} {
+test io-27.2 {FlushChannel, some output buffered} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation lf -eofchar {}
@@ -474,7 +1962,7 @@ test io-4.2 {FlushChannel, some output buffered} {
     lappend l [file size test1]
     set l
 } {0 6 6}
-test io-4.3 {FlushChannel, implicit flush on close} {
+test io-27.3 {FlushChannel, implicit flush on close} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation lf -eofchar {}
@@ -485,7 +1973,7 @@ test io-4.3 {FlushChannel, implicit flush on close} {
     lappend l [file size test1]
     set l
 } {0 6}
-test io-4.4 {FlushChannel, implicit flush when buffer fills} {
+test io-27.4 {FlushChannel, implicit flush when buffer fills} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation lf -eofchar {}
@@ -501,7 +1989,7 @@ test io-4.4 {FlushChannel, implicit flush when buffer fills} {
     close $f
     set l
 } {0 60 72}
-test io-4.5 {FlushChannel, implicit flush when buffer fills and on close} {unixOrPc} {
+test io-27.5 {FlushChannel, implicit flush when buffer fills and on close} {unixOrPc} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation lf -buffersize 60 -eofchar {}
@@ -515,7 +2003,7 @@ test io-4.5 {FlushChannel, implicit flush when buffer fills and on close} {unixO
     lappend l [file size test1]
     set l
 } {0 60 72}
-test io-4.6 {FlushChannel, async flushing, async close} {stdio && asyncPipeClose} {
+test io-27.6 {FlushChannel, async flushing, async close} {stdio && asyncPipeClose} {
     removeFile pipe
     removeFile output
     set f [open pipe w]
@@ -546,7 +2034,7 @@ test io-4.6 {FlushChannel, async flushing, async close} {stdio && asyncPipeClose
         update
     }
     if {$counter == 1000} {
-        set result probably_broken
+        set result "file size only [file size output]"
     } else {
         set result ok
     }
@@ -554,7 +2042,7 @@ test io-4.6 {FlushChannel, async flushing, async close} {stdio && asyncPipeClose
 
 # Tests closing a channel. The functions tested are CloseChannel and Tcl_Close.
 
-test io-5.1 {CloseChannel called when all references are dropped} {
+test io-28.1 {CloseChannel called when all references are dropped} {
     removeFile test1
     set f [open test1 w]
     interp create x
@@ -567,7 +2055,7 @@ test io-5.1 {CloseChannel called when all references are dropped} {
     close $f
     set l
 } {2 1}
-test io-5.2 {CloseChannel called when all references are dropped} {
+test io-28.2 {CloseChannel called when all references are dropped} {
     removeFile test1
     set f [open test1 w]
     interp create x
@@ -582,7 +2070,7 @@ test io-5.2 {CloseChannel called when all references are dropped} {
     close $f
     set l
 } abcdef
-test io-5.3 {CloseChannel, not called before output queue is empty} {unixOrPc asyncPipeClose nonPortable tempNotPc} {
+test io-28.3 {CloseChannel, not called before output queue is empty} {stdio asyncPipeClose nonPortable} {
     removeFile pipe
     removeFile output
     set f [open pipe w]
@@ -613,9 +2101,6 @@ test io-5.3 {CloseChannel, not called before output queue is empty} {unixOrPc as
     set f [open "|[list $tcltest pipe]" r+]
     fconfigure $f -blocking off -eofchar {}
 
-    # Under windows, the first 24576 bytes of $x are copied to $f, and
-    # then the writing fails.  
-
     puts -nonewline $f $x
     close $f
     set counter 0
@@ -630,7 +2115,7 @@ test io-5.3 {CloseChannel, not called before output queue is empty} {unixOrPc as
         set result ok
     }
 } ok
-test io-5.4 {Tcl_Close} {
+test io-28.4 {Tcl_Close} {
     removeFile test1
     set l ""
     lappend l [lsort [testchannel open]]
@@ -643,7 +2128,7 @@ test io-5.4 {Tcl_Close} {
 		$consoleFileNames]
     string compare $l $x
 } 0
-test io-5.5 {Tcl_Close vs standard handles} {unixOnly} {
+test io-28.5 {Tcl_Close vs standard handles} {stdio unixOnly} {
     removeFile script
     set f [open script w]
     puts $f {
@@ -657,13 +2142,10 @@ test io-5.5 {Tcl_Close vs standard handles} {unixOnly} {
     set l
 } {file1 file2}
 
-# Test output on channels. The functions tested are Tcl_Write
-# and Tcl_Flush.
-
-test io-6.1 {Tcl_Write, channel not writable} {
+test io-29.1 {Tcl_WriteChars, channel not writable} {
     list [catch {puts stdin hello} msg] $msg
 } {1 {channel "stdin" wasn't opened for writing}}
-test io-6.2 {Tcl_Write, empty string} {
+test io-29.2 {Tcl_WriteChars, empty string} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -eofchar {}
@@ -671,7 +2153,7 @@ test io-6.2 {Tcl_Write, empty string} {
     close $f
     file size test1
 } 0
-test io-6.3 {Tcl_Write, nonempty string} {
+test io-29.3 {Tcl_WriteChars, nonempty string} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -eofchar {}
@@ -679,7 +2161,7 @@ test io-6.3 {Tcl_Write, nonempty string} {
     close $f
     file size test1
 } 5
-test io-6.4 {Tcl_Write, buffering in full buffering mode} {
+test io-29.4 {Tcl_WriteChars, buffering in full buffering mode} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation lf -buffering full -eofchar {}
@@ -693,7 +2175,7 @@ test io-6.4 {Tcl_Write, buffering in full buffering mode} {
     close $f
     set l
 } {6 0 0 6}
-test io-6.5 {Tcl_Write, buffering in line buffering mode} {
+test io-29.5 {Tcl_WriteChars, buffering in line buffering mode} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation lf -buffering line -eofchar {}
@@ -707,7 +2189,7 @@ test io-6.5 {Tcl_Write, buffering in line buffering mode} {
     close $f
     set l
 } {5 0 0 11}
-test io-6.6 {Tcl_Write, buffering in no buffering mode} {
+test io-29.6 {Tcl_WriteChars, buffering in no buffering mode} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation lf -buffering none -eofchar {}
@@ -721,7 +2203,8 @@ test io-6.6 {Tcl_Write, buffering in no buffering mode} {
     close $f
     set l
 } {0 5 0 11}
-test io-6.7 {Tcl_Flush, full buffering} {
+
+test io-29.7 {Tcl_Flush, full buffering} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation lf -buffering full -eofchar {}
@@ -738,7 +2221,7 @@ test io-6.7 {Tcl_Flush, full buffering} {
     close $f
     set l
 } {5 0 11 0 0 11}
-test io-6.8 {Tcl_Flush, full buffering} {
+test io-29.8 {Tcl_Flush, full buffering} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation lf -buffering line
@@ -758,34 +2241,34 @@ test io-6.8 {Tcl_Flush, full buffering} {
     close $f
     set l
 } {5 0 0 5 0 11 0 11}
-test io-6.9 {Tcl_Flush, channel not writable} {
+test io-29.9 {Tcl_Flush, channel not writable} {
     list [catch {flush stdin} msg] $msg
 } {1 {channel "stdin" wasn't opened for writing}}
-test io-6.10 {Tcl_Write, looping and buffering} {
+test io-29.10 {Tcl_WriteChars, looping and buffering} {
     removeFile test1
     set f1 [open test1 w]
     fconfigure $f1 -translation lf -eofchar {}
     set f2 [open longfile r]
     for {set x 0} {$x < 10} {incr x} {
-        puts $f1 [gets $f2]
+	puts $f1 [gets $f2]
     }
     close $f2
     close $f1
     file size test1
 } 387
-test io-6.11 {Tcl_Write, no newline, implicit flush} {
+test io-29.11 {Tcl_WriteChars, no newline, implicit flush} {
     removeFile test1
     set f1 [open test1 w]
     fconfigure $f1 -eofchar {}
     set f2 [open longfile r]
     for {set x 0} {$x < 10} {incr x} {
-        puts -nonewline $f1 [gets $f2]
+	puts -nonewline $f1 [gets $f2]
     }
     close $f1
     close $f2
     file size test1
 } 377
-test io-6.12 {Tcl_Write on a pipe} {stdio} {
+test io-29.12 {Tcl_WriteChars on a pipe} {stdio} {
     removeFile test1
     removeFile pipe
     set f1 [open pipe w]
@@ -800,17 +2283,17 @@ test io-6.12 {Tcl_Write on a pipe} {stdio} {
     set f2 [open longfile r]
     set y ok
     for {set x 0} {$x < 10} {incr x} {
-        set l1 [gets $f1]
-        set l2 [gets $f2]
-        if {"$l1" != "$l2"} {
-            set y broken
-        }
+	set l1 [gets $f1]
+	set l2 [gets $f2]
+	if {"$l1" != "$l2"} {
+	    set y broken
+	}
     }
     close $f1
     close $f2
     set y
 } ok
-test io-6.13 {Tcl_Write to a pipe, line buffered} {stdio} {
+test io-29.13 {Tcl_WriteChars to a pipe, line buffered} {stdio} {
     removeFile test1
     removeFile pipe
     set f1 [open pipe w]
@@ -827,19 +2310,19 @@ test io-6.13 {Tcl_Write to a pipe, line buffered} {stdio} {
     puts $f1 $line
     set backline [gets $f1]
     if {"$line" != "$backline"} {
-        set y broken
+	set y broken
     }
     set line [gets $f2]
     puts $f1 $line
     set backline [gets $f1]
     if {"$line" != "$backline"} {
-        set y broken
+	set y broken
     }
     close $f1
     close $f2
     set y
 } ok
-test io-6.14 {Tcl_Write, buffering and implicit flush at close} {
+test io-29.14 {Tcl_WriteChars, buffering and implicit flush at close} {
     removeFile test3
     set f [open test3 w]
     puts -nonewline $f "Text1"
@@ -851,7 +2334,7 @@ test io-6.14 {Tcl_Write, buffering and implicit flush at close} {
     close $f
     set x
 } {Text1 Text 2 Text 3}
-test io-6.15 {Tcl_Flush, channel not open for writing} {
+test io-29.15 {Tcl_Flush, channel not open for writing} {
     removeFile test1
     set fd [open test1 w]
     close $fd
@@ -861,14 +2344,14 @@ test io-6.15 {Tcl_Flush, channel not open for writing} {
     string compare $x \
 	[list 1 "channel \"$fd\" wasn't opened for writing"]
 } 0
-test io-6.16 {Tcl_Flush on pipe opened only for reading} {stdio} {
+test io-29.16 {Tcl_Flush on pipe opened only for reading} {stdio} {
     set fd [open "|[list $tcltest cat longfile]" r]
     set x [list [catch {flush $fd} msg] $msg]
     catch {close $fd}
     string compare $x \
 	[list 1 "channel \"$fd\" wasn't opened for writing"]
 } 0
-test io-6.17 {Tcl_Write buffers, then Tcl_Flush flushes} {
+test io-29.17 {Tcl_WriteChars buffers, then Tcl_Flush flushes} {
     removeFile test1
     set f1 [open test1 w]
     fconfigure $f1 -translation lf
@@ -880,7 +2363,7 @@ test io-6.17 {Tcl_Write buffers, then Tcl_Flush flushes} {
     close $f1
     set x
 } 18
-test io-6.18 {Tcl_Write and Tcl_Flush intermixed} {
+test io-29.18 {Tcl_WriteChars and Tcl_Flush intermixed} {
     removeFile test1
     set x ""
     set f1 [open test1 w]
@@ -899,7 +2382,7 @@ test io-6.18 {Tcl_Write and Tcl_Flush intermixed} {
     close $f1
     set x
 } {18 24 30}
-test io-6.19 {Explicit and implicit flushes} {
+test io-29.19 {Explicit and implicit flushes} {
     removeFile test1
     set f1 [open test1 w]
     fconfigure $f1 -translation lf -eofchar {}
@@ -917,7 +2400,7 @@ test io-6.19 {Explicit and implicit flushes} {
     lappend x [file size test1]
     set x
 } {18 24 30}
-test io-6.20 {Implicit flush when buffer is full} {
+test io-29.20 {Implicit flush when buffer is full} {
     removeFile test1
     set f1 [open test1 w]
     fconfigure $f1 -translation lf -eofchar {}
@@ -928,14 +2411,14 @@ test io-6.20 {Implicit flush when buffer is full} {
     set z ""
     lappend z [file size test1]
     for {set x 0} {$x < 100} {incr x} {
-        puts $f1 $line
+	puts $f1 $line
     }
     lappend z [file size test1]
     close $f1
     lappend z [file size test1]
     set z
 } {4096 12288 12600}
-test io-6.21 {Tcl_Flush to pipe} {stdio} {
+test io-29.21 {Tcl_Flush to pipe} {stdio} {
     removeFile pipe
     set f1 [open pipe w]
     puts $f1 {set x [read stdin 6]}
@@ -949,7 +2432,7 @@ test io-6.21 {Tcl_Flush to pipe} {stdio} {
     catch {close $f1}
     set x
 } "read 6 characters"
-test io-6.22 {Tcl_Flush called at other end of pipe} {stdio} {
+test io-29.22 {Tcl_Flush called at other end of pipe} {stdio} {
     removeFile pipe
     set f1 [open pipe w]
     puts $f1 {
@@ -972,7 +2455,7 @@ test io-6.22 {Tcl_Flush called at other end of pipe} {stdio} {
     close $f1
     set x
 } {hello hello bye}
-test io-6.23 {Tcl_Flush and line buffering at end of pipe} {stdio} {
+test io-29.23 {Tcl_Flush and line buffering at end of pipe} {stdio} {
     removeFile pipe
     set f1 [open pipe w]
     puts $f1 {
@@ -992,7 +2475,7 @@ test io-6.23 {Tcl_Flush and line buffering at end of pipe} {stdio} {
     close $f1
     set x
 } {hello hello bye}
-test io-6.24 {Tcl_Write and Tcl_Flush move end of file} {
+test io-29.24 {Tcl_WriteChars and Tcl_Flush move end of file} {
     set f [open test3 w]
     puts $f "Line 1"
     puts $f "Line 2"
@@ -1006,9 +2489,8 @@ test io-6.24 {Tcl_Write and Tcl_Flush move end of file} {
     close $f2
     close $f
     set x
-} {{} {Line 1
-Line 2}}
-test io-6.25 {Implicit flush with Tcl_Flush to command pipelines} {stdio} {
+} "{} {Line 1\nLine 2}"
+test io-29.25 {Implicit flush with Tcl_Flush to command pipelines} {stdio} {
     removeFile test3
     set f [open "|[list $tcltest cat | $tcltest cat > test3]" w]
     puts $f "Line 1"
@@ -1019,10 +2501,8 @@ test io-6.25 {Implicit flush with Tcl_Flush to command pipelines} {stdio} {
     set x [read $f]
     close $f
     set x
-} {Line 1
-Line 2
-}    
-test io-6.26 {Tcl_Flush, Tcl_Write on bidirectional pipelines} {unixOrPc && unixExecs && tempNotPc} {
+} "Line 1\nLine 2\n"
+test io-29.26 {Tcl_Flush, Tcl_Write on bidirectional pipelines} {stdio && unixExecs} {
     set f [open "|[list cat -u]" r+]
     puts $f "Line1"
     flush $f
@@ -1030,7 +2510,7 @@ test io-6.26 {Tcl_Flush, Tcl_Write on bidirectional pipelines} {unixOrPc && unix
     close $f
     set x
 } {Line1}
-test io-6.27 {Tcl_Flush on closed pipeline} {stdio && tempNotPc} {
+test io-29.27 {Tcl_Flush on closed pipeline} {stdio} {
     removeFile pipe
     set f [open pipe w]
     puts $f {exit}
@@ -1058,7 +2538,7 @@ test io-6.27 {Tcl_Flush on closed pipeline} {stdio && tempNotPc} {
     regsub {".*":} $x {"":} x
     string tolower $x
 } {1 {error flushing "": broken pipe} {posix epipe {broken pipe}}}
-test io-6.28 {Tcl_Write, lf mode} {
+test io-29.28 {Tcl_WriteChars, lf mode} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation lf -eofchar {}
@@ -1068,7 +2548,7 @@ test io-6.28 {Tcl_Write, lf mode} {
     close $f
     set s
 } 21
-test io-6.29 {Tcl_Write, cr mode} {
+test io-29.29 {Tcl_WriteChars, cr mode} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation cr -eofchar {}
@@ -1076,7 +2556,7 @@ test io-6.29 {Tcl_Write, cr mode} {
     close $f
     file size test1
 } 21
-test io-6.30 {Tcl_Write, crlf mode} {
+test io-29.30 {Tcl_WriteChars, crlf mode} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation crlf -eofchar {}
@@ -1084,7 +2564,7 @@ test io-6.30 {Tcl_Write, crlf mode} {
     close $f
     file size test1
 } 25
-test io-6.31 {Tcl_Write, background flush} {stdio} {
+test io-29.31 {Tcl_WriteChars, background flush} {stdio} {
     removeFile pipe
     removeFile output
     set f [open pipe w]
@@ -1100,7 +2580,7 @@ test io-6.31 {Tcl_Write, background flush} {stdio} {
     close $f
     set x 01234567890123456789012345678901
     for {set i 0} {$i < 11} {incr i} {
-        set x "$x$x"
+	set x "$x$x"
     }
     set f [open output w]
     close $f
@@ -1110,17 +2590,17 @@ test io-6.31 {Tcl_Write, background flush} {stdio} {
     close $f
     set counter 0
     while {([file size output] < 65536) && ($counter < 1000)} {
-        incr counter
-        after 5
-        update
+	incr counter
+	after 5
+	update
     }
     if {$counter == 1000} {
-        set result probably_broken
+	set result "file size only [file size output]"
     } else {
-        set result ok
+	set result ok
     }
 } ok
-test io-6.32 {Tcl_Write, background flush to slow reader} {stdio && asyncPipeClose} {
+test io-29.32 {Tcl_WriteChars, background flush to slow reader} {stdio && asyncPipeClose} {
     removeFile pipe
     removeFile output
     set f [open pipe w]
@@ -1137,7 +2617,7 @@ test io-6.32 {Tcl_Write, background flush to slow reader} {stdio && asyncPipeClo
     close $f
     set x 01234567890123456789012345678901
     for {set i 0} {$i < 11} {incr i} {
-        set x "$x$x"
+	set x "$x$x"
     }
     set f [open output w]
     close $f
@@ -1147,17 +2627,17 @@ test io-6.32 {Tcl_Write, background flush to slow reader} {stdio && asyncPipeClo
     close $f
     set counter 0
     while {([file size output] < 65536) && ($counter < 1000)} {
-        incr counter
-        after 20
-        update
+	incr counter
+	after 20
+	update
     }
     if {$counter == 1000} {
-        set result probably_broken
+	set result "file size only [file size output]"
     } else {
-        set result ok
+	set result ok
     }
 } ok
-test io-6.33 {Tcl_Flush, implicit flush on exit} {stdio} {
+test io-29.33 {Tcl_Flush, implicit flush on exit} {stdio} {
     set f [open script w]
     puts $f {
 	set f [open test1 w]
@@ -1172,12 +2652,8 @@ test io-6.33 {Tcl_Flush, implicit flush on exit} {stdio} {
     set r [read $f]
     close $f
     set r
-} {hello
-bye
-strange
-}
-
-test io-6.34 {Tcl_Close, async flush on close, using sockets} {socket tempNotMac} {
+} "hello\nbye\nstrange\n"
+test io-29.34 {Tcl_Close, async flush on close, using sockets} {socket tempNotMac} {
     set c 0
     set x running
     set l abcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyz
@@ -1213,7 +2689,10 @@ test io-6.34 {Tcl_Close, async flush on close, using sockets} {socket tempNotMac
     vwait x
     set c
 } 2000
-test io-6.35 {Tcl_Close vs fileevent vs multiple interpreters} {socket} {
+test io-29.35 {Tcl_Close vs fileevent vs multiple interpreters} {socket tempNotMac} {
+    # On Mac, this test screws up sockets such that subsequent tests using port 2828 
+    # either cause errors or panic().
+     
     catch {interp delete x}
     catch {interp delete y}
     interp create x
@@ -1254,7 +2733,7 @@ test io-6.35 {Tcl_Close vs fileevent vs multiple interpreters} {socket} {
 
 # Test end of line translations. Procedures tested are Tcl_Write, Tcl_Read.
 
-test io-7.1 {Tcl_Write lf, Tcl_Read lf} {
+test io-30.1 {Tcl_Write lf, Tcl_Read lf} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation lf
@@ -1266,7 +2745,7 @@ test io-7.1 {Tcl_Write lf, Tcl_Read lf} {
     close $f
     set x
 } "hello\nthere\nand\nhere\n"
-test io-7.2 {Tcl_Write lf, Tcl_Read cr} {
+test io-30.2 {Tcl_Write lf, Tcl_Read cr} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation lf
@@ -1278,7 +2757,7 @@ test io-7.2 {Tcl_Write lf, Tcl_Read cr} {
     close $f
     set x
 } "hello\nthere\nand\nhere\n"
-test io-7.3 {Tcl_Write lf, Tcl_Read crlf} {
+test io-30.3 {Tcl_Write lf, Tcl_Read crlf} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation lf
@@ -1290,7 +2769,7 @@ test io-7.3 {Tcl_Write lf, Tcl_Read crlf} {
     close $f
     set x
 } "hello\nthere\nand\nhere\n"
-test io-7.4 {Tcl_Write cr, Tcl_Read cr} {
+test io-30.4 {Tcl_Write cr, Tcl_Read cr} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation cr
@@ -1302,7 +2781,7 @@ test io-7.4 {Tcl_Write cr, Tcl_Read cr} {
     close $f
     set x
 } "hello\nthere\nand\nhere\n"
-test io-7.5 {Tcl_Write cr, Tcl_Read lf} {
+test io-30.5 {Tcl_Write cr, Tcl_Read lf} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation cr
@@ -1314,7 +2793,7 @@ test io-7.5 {Tcl_Write cr, Tcl_Read lf} {
     close $f
     set x
 } "hello\rthere\rand\rhere\r"
-test io-7.6 {Tcl_Write cr, Tcl_Read crlf} {
+test io-30.6 {Tcl_Write cr, Tcl_Read crlf} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation cr
@@ -1326,7 +2805,7 @@ test io-7.6 {Tcl_Write cr, Tcl_Read crlf} {
     close $f
     set x 
 } "hello\rthere\rand\rhere\r"
-test io-7.7 {Tcl_Write crlf, Tcl_Read crlf} {
+test io-30.7 {Tcl_Write crlf, Tcl_Read crlf} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation crlf
@@ -1338,7 +2817,7 @@ test io-7.7 {Tcl_Write crlf, Tcl_Read crlf} {
     close $f
     set x
 } "hello\nthere\nand\nhere\n"
-test io-7.8 {Tcl_Write crlf, Tcl_Read lf} {
+test io-30.8 {Tcl_Write crlf, Tcl_Read lf} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation crlf
@@ -1350,7 +2829,7 @@ test io-7.8 {Tcl_Write crlf, Tcl_Read lf} {
     close $f
     set x
 } "hello\r\nthere\r\nand\r\nhere\r\n"
-test io-7.9 {Tcl_Write crlf, Tcl_Read cr} {
+test io-30.9 {Tcl_Write crlf, Tcl_Read cr} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation crlf
@@ -1362,7 +2841,7 @@ test io-7.9 {Tcl_Write crlf, Tcl_Read cr} {
     close $f
     set x
 } "hello\n\nthere\n\nand\n\nhere\n\n"
-test io-7.10 {Tcl_Write lf, Tcl_Read auto} {
+test io-30.10 {Tcl_Write lf, Tcl_Read auto} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation lf
@@ -1378,7 +2857,7 @@ there
 and
 here
 } auto}
-test io-7.11 {Tcl_Write cr, Tcl_Read auto} {
+test io-30.11 {Tcl_Write cr, Tcl_Read auto} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation cr
@@ -1394,7 +2873,7 @@ there
 and
 here
 } auto}
-test io-7.12 {Tcl_Write crlf, Tcl_Read auto} {
+test io-30.12 {Tcl_Write crlf, Tcl_Read auto} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation crlf
@@ -1411,7 +2890,7 @@ and
 here
 } auto}
 
-test io-7.13 {Tcl_Write crlf on block boundary, Tcl_Read auto} {
+test io-30.13 {Tcl_Write crlf on block boundary, Tcl_Read auto} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation crlf
@@ -1428,7 +2907,7 @@ test io-7.13 {Tcl_Write crlf on block boundary, Tcl_Read auto} {
     string length $c
 } [expr 700*15+1]
 
-test io-7.14 {Tcl_Write crlf on block boundary, Tcl_Read crlf} {
+test io-30.14 {Tcl_Write crlf on block boundary, Tcl_Read crlf} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation crlf
@@ -1445,7 +2924,7 @@ test io-7.14 {Tcl_Write crlf on block boundary, Tcl_Read crlf} {
     string length $c
 } [expr 700*15+1]
 
-test io-7.15 {Tcl_Write mixed, Tcl_Read auto} {
+test io-30.15 {Tcl_Write mixed, Tcl_Read auto} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation lf
@@ -1461,7 +2940,7 @@ there
 and
 here
 }
-test io-7.16 {Tcl_Write ^Z at end, Tcl_Read auto} {
+test io-30.16 {Tcl_Write ^Z at end, Tcl_Read auto} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation lf
@@ -1477,7 +2956,7 @@ there
 and
 here
 }
-test io-7.17 {Tcl_Write, implicit ^Z at end, Tcl_Read auto} {pcOnly} {
+test io-30.17 {Tcl_Write, implicit ^Z at end, Tcl_Read auto} {pcOnly} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -eofchar \x1a -translation lf
@@ -1493,7 +2972,7 @@ there
 and
 here
 }
-test io-7.18 {Tcl_Write, ^Z in middle, Tcl_Read auto} {
+test io-30.18 {Tcl_Write, ^Z in middle, Tcl_Read auto} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation lf
@@ -1513,7 +2992,7 @@ test io-7.18 {Tcl_Write, ^Z in middle, Tcl_Read auto} {
     close $f
     set l
 } {abc def 0 {} 1 {} 1}
-test io-7.19 {Tcl_Write, ^Z no newline in middle, Tcl_Read auto} {
+test io-30.19 {Tcl_Write, ^Z no newline in middle, Tcl_Read auto} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation lf
@@ -1533,7 +3012,7 @@ test io-7.19 {Tcl_Write, ^Z no newline in middle, Tcl_Read auto} {
     close $f
     set l
 } {abc def 0 {} 1 {} 1}
-test io-7.20 {Tcl_Write, ^Z in middle ignored, Tcl_Read lf} {
+test io-30.20 {Tcl_Write, ^Z in middle ignored, Tcl_Read lf} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation lf -eofchar {}
@@ -1555,7 +3034,7 @@ test io-7.20 {Tcl_Write, ^Z in middle ignored, Tcl_Read lf} {
     close $f
     set l
 } "abc def 0 \x1aghi 0 qrs 0 {} 1"
-test io-7.21 {Tcl_Write, ^Z in middle ignored, Tcl_Read cr} {
+test io-30.21 {Tcl_Write, ^Z in middle ignored, Tcl_Read cr} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation lf -eofchar {}
@@ -1566,14 +3045,14 @@ test io-7.21 {Tcl_Write, ^Z in middle ignored, Tcl_Read cr} {
     fconfigure $f -translation cr -eofchar {}
     set l ""
     set x [gets $f]
-    lappend l [string compare $x "abc\ndef\n\x1aghi\nqrs"]
+    lappend l [string compare $x "abc\ndef\n\x1aghi\nqrs\n"]
     lappend l [eof $f]
     lappend l [gets $f]
     lappend l [eof $f]
     close $f
     set l
 } {0 1 {} 1}
-test io-7.22 {Tcl_Write, ^Z in middle ignored, Tcl_Read crlf} {
+test io-30.22 {Tcl_Write, ^Z in middle ignored, Tcl_Read crlf} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation lf -eofchar {}
@@ -1584,14 +3063,14 @@ test io-7.22 {Tcl_Write, ^Z in middle ignored, Tcl_Read crlf} {
     fconfigure $f -translation crlf -eofchar {}
     set l ""
     set x [gets $f]
-    lappend l [string compare $x "abc\ndef\n\x1aghi\nqrs"]
+    lappend l [string compare $x "abc\ndef\n\x1aghi\nqrs\n"]
     lappend l [eof $f]
     lappend l [gets $f]
     lappend l [eof $f]
     close $f
     set l
 } {0 1 {} 1}
-test io-7.23 {Tcl_Write lf, ^Z in middle, Tcl_Read auto} {
+test io-30.23 {Tcl_Write lf, ^Z in middle, Tcl_Read auto} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation lf
@@ -1605,7 +3084,7 @@ test io-7.23 {Tcl_Write lf, ^Z in middle, Tcl_Read auto} {
     close $f
     list $c $e
 } {8 1}
-test io-7.24 {Tcl_Write lf, ^Z in middle, Tcl_Read lf} {
+test io-30.24 {Tcl_Write lf, ^Z in middle, Tcl_Read lf} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation lf
@@ -1619,7 +3098,7 @@ test io-7.24 {Tcl_Write lf, ^Z in middle, Tcl_Read lf} {
     close $f
     list $c $e
 } {8 1}
-test io-7.25 {Tcl_Write cr, ^Z in middle, Tcl_Read auto} {
+test io-30.25 {Tcl_Write cr, ^Z in middle, Tcl_Read auto} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation cr
@@ -1633,7 +3112,7 @@ test io-7.25 {Tcl_Write cr, ^Z in middle, Tcl_Read auto} {
     close $f
     list $c $e
 } {8 1}
-test io-7.26 {Tcl_Write cr, ^Z in middle, Tcl_Read cr} {
+test io-30.26 {Tcl_Write cr, ^Z in middle, Tcl_Read cr} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation cr
@@ -1647,7 +3126,7 @@ test io-7.26 {Tcl_Write cr, ^Z in middle, Tcl_Read cr} {
     close $f
     list $c $e
 } {8 1}
-test io-7.27 {Tcl_Write crlf, ^Z in middle, Tcl_Read auto} {
+test io-30.27 {Tcl_Write crlf, ^Z in middle, Tcl_Read auto} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation crlf
@@ -1661,7 +3140,7 @@ test io-7.27 {Tcl_Write crlf, ^Z in middle, Tcl_Read auto} {
     close $f
     list $c $e
 } {8 1}
-test io-7.28 {Tcl_Write crlf, ^Z in middle, Tcl_Read crlf} {
+test io-30.28 {Tcl_Write crlf, ^Z in middle, Tcl_Read crlf} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation crlf
@@ -1678,7 +3157,7 @@ test io-7.28 {Tcl_Write crlf, ^Z in middle, Tcl_Read crlf} {
 
 # Test end of line translations. Functions tested are Tcl_Write and Tcl_Gets.
 
-test io-8.1 {Tcl_Write lf, Tcl_Gets auto} {
+test io-31.1 {Tcl_Write lf, Tcl_Gets auto} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation lf
@@ -1695,7 +3174,7 @@ test io-8.1 {Tcl_Write lf, Tcl_Gets auto} {
     close $f
     set l
 } {hello 6 auto there 12 auto}
-test io-8.2 {Tcl_Write cr, Tcl_Gets auto} {
+test io-31.2 {Tcl_Write cr, Tcl_Gets auto} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation cr
@@ -1712,7 +3191,7 @@ test io-8.2 {Tcl_Write cr, Tcl_Gets auto} {
     close $f
     set l
 } {hello 6 auto there 12 auto}
-test io-8.3 {Tcl_Write crlf, Tcl_Gets auto} {
+test io-31.3 {Tcl_Write crlf, Tcl_Gets auto} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation crlf
@@ -1729,7 +3208,7 @@ test io-8.3 {Tcl_Write crlf, Tcl_Gets auto} {
     close $f
     set l
 } {hello 7 auto there 14 auto}
-test io-8.4 {Tcl_Write lf, Tcl_Gets lf} {
+test io-31.4 {Tcl_Write lf, Tcl_Gets lf} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation lf
@@ -1747,7 +3226,7 @@ test io-8.4 {Tcl_Write lf, Tcl_Gets lf} {
     close $f
     set l
 } {hello 6 lf there 12 lf}
-test io-8.5 {Tcl_Write lf, Tcl_Gets cr} {
+test io-31.5 {Tcl_Write lf, Tcl_Gets cr} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation lf
@@ -1766,8 +3245,8 @@ test io-8.5 {Tcl_Write lf, Tcl_Gets cr} {
     lappend l [eof $f]
     close $f
     set l
-} {20 21 cr 1 {} 21 cr 1}
-test io-8.6 {Tcl_Write lf, Tcl_Gets crlf} {
+} {21 21 cr 1 {} 21 cr 1}
+test io-31.6 {Tcl_Write lf, Tcl_Gets crlf} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation lf
@@ -1786,8 +3265,8 @@ test io-8.6 {Tcl_Write lf, Tcl_Gets crlf} {
     lappend l [eof $f]
     close $f
     set l
-} {20 21 crlf 1 {} 21 crlf 1}
-test io-8.7 {Tcl_Write cr, Tcl_Gets cr} {
+} {21 21 crlf 1 {} 21 crlf 1}
+test io-31.7 {Tcl_Write cr, Tcl_Gets cr} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation cr
@@ -1807,7 +3286,7 @@ test io-8.7 {Tcl_Write cr, Tcl_Gets cr} {
     close $f
     set l
 } {hello 6 cr 0 there 12 cr 0}
-test io-8.8 {Tcl_Write cr, Tcl_Gets lf} {
+test io-31.8 {Tcl_Write cr, Tcl_Gets lf} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation cr
@@ -1827,7 +3306,7 @@ test io-8.8 {Tcl_Write cr, Tcl_Gets lf} {
     close $f
     set l
 } {21 21 lf 1 {} 21 lf 1}
-test io-8.9 {Tcl_Write cr, Tcl_Gets crlf} {
+test io-31.9 {Tcl_Write cr, Tcl_Gets crlf} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation cr
@@ -1847,7 +3326,7 @@ test io-8.9 {Tcl_Write cr, Tcl_Gets crlf} {
     close $f
     set l
 } {21 21 crlf 1 {} 21 crlf 1}
-test io-8.10 {Tcl_Write crlf, Tcl_Gets crlf} {
+test io-31.10 {Tcl_Write crlf, Tcl_Gets crlf} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation crlf
@@ -1867,7 +3346,7 @@ test io-8.10 {Tcl_Write crlf, Tcl_Gets crlf} {
     close $f
     set l
 } {hello 7 crlf 0 there 14 crlf 0}
-test io-8.11 {Tcl_Write crlf, Tcl_Gets cr} {
+test io-31.11 {Tcl_Write crlf, Tcl_Gets cr} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation crlf
@@ -1887,7 +3366,7 @@ test io-8.11 {Tcl_Write crlf, Tcl_Gets cr} {
     close $f
     set l
 } {hello 6 cr 0 6 13 cr 0}
-test io-8.12 {Tcl_Write crlf, Tcl_Gets lf} {
+test io-31.12 {Tcl_Write crlf, Tcl_Gets lf} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation crlf
@@ -1907,7 +3386,7 @@ test io-8.12 {Tcl_Write crlf, Tcl_Gets lf} {
     close $f
     set l
 } {6 7 lf 0 6 14 lf 0}
-test io-8.13 {binary mode is synonym of lf mode} {
+test io-31.13 {binary mode is synonym of lf mode} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation binary
@@ -1919,7 +3398,7 @@ test io-8.13 {binary mode is synonym of lf mode} {
 # Test io-9.14 has been removed because "auto" output translation mode is
 # not supoprted.
 #
-test io-8.14 {Tcl_Write mixed, Tcl_Gets auto} {
+test io-31.14 {Tcl_Write mixed, Tcl_Gets auto} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation lf
@@ -1938,7 +3417,7 @@ test io-8.14 {Tcl_Write mixed, Tcl_Gets auto} {
     close $f
     set l
 } {hello there and here 0 {} 1}
-test io-8.15 {Tcl_Write mixed, Tcl_Gets auto} {
+test io-31.15 {Tcl_Write mixed, Tcl_Gets auto} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation lf
@@ -1957,7 +3436,7 @@ test io-8.15 {Tcl_Write mixed, Tcl_Gets auto} {
     close $f
     set l
 } {hello there and here 0 {} 1}
-test io-8.16 {Tcl_Write mixed, Tcl_Gets auto} {
+test io-31.16 {Tcl_Write mixed, Tcl_Gets auto} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation lf
@@ -1975,7 +3454,7 @@ test io-8.16 {Tcl_Write mixed, Tcl_Gets auto} {
     close $f
     set l
 } {hello there and here 0 {} 1}
-test io-8.17 {Tcl_Write mixed, Tcl_Gets auto} {
+test io-31.17 {Tcl_Write mixed, Tcl_Gets auto} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation lf
@@ -1994,7 +3473,7 @@ test io-8.17 {Tcl_Write mixed, Tcl_Gets auto} {
     close $f
     set l
 } {hello there and here 0 {} 1}
-test io-8.18 {Tcl_Write ^Z at end, Tcl_Gets auto} {
+test io-31.18 {Tcl_Write ^Z at end, Tcl_Gets auto} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation lf
@@ -2014,7 +3493,7 @@ test io-8.18 {Tcl_Write ^Z at end, Tcl_Gets auto} {
     close $f
     set l
 } {hello there and here 0 {} 1}
-test io-8.19 {Tcl_Write, implicit ^Z at end, Tcl_Gets auto} {
+test io-31.19 {Tcl_Write, implicit ^Z at end, Tcl_Gets auto} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -eofchar \x1a -translation lf
@@ -2033,7 +3512,7 @@ test io-8.19 {Tcl_Write, implicit ^Z at end, Tcl_Gets auto} {
     close $f
     set l
 } {hello there and here 0 {} 1}
-test io-8.20 {Tcl_Write, ^Z in middle, Tcl_Gets auto, eofChar} {
+test io-31.20 {Tcl_Write, ^Z in middle, Tcl_Gets auto, eofChar} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation lf
@@ -2052,7 +3531,7 @@ test io-8.20 {Tcl_Write, ^Z in middle, Tcl_Gets auto, eofChar} {
     close $f
     set l
 } {abc def 0 {} 1}
-test io-8.21 {Tcl_Write, no newline ^Z in middle, Tcl_Gets auto, eofChar} {
+test io-31.21 {Tcl_Write, no newline ^Z in middle, Tcl_Gets auto, eofChar} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation lf
@@ -2070,7 +3549,7 @@ test io-8.21 {Tcl_Write, no newline ^Z in middle, Tcl_Gets auto, eofChar} {
     close $f
     set l
 } {abc def 0 {} 1}
-test io-8.22 {Tcl_Write, ^Z in middle ignored, Tcl_Gets lf} {
+test io-31.22 {Tcl_Write, ^Z in middle ignored, Tcl_Gets lf} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation lf -eofchar {}
@@ -2092,7 +3571,7 @@ test io-8.22 {Tcl_Write, ^Z in middle ignored, Tcl_Gets lf} {
     close $f
     set l
 } "abc def 0 \x1aqrs 0 tuv 0 {} 1"
-test io-8.23 {Tcl_Write, ^Z in middle ignored, Tcl_Gets cr} {
+test io-31.23 {Tcl_Write, ^Z in middle ignored, Tcl_Gets cr} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation cr -eofchar {}
@@ -2114,7 +3593,7 @@ test io-8.23 {Tcl_Write, ^Z in middle ignored, Tcl_Gets cr} {
     close $f
     set l
 } "abc def 0 \x1aqrs 0 tuv 0 {} 1"
-test io-8.24 {Tcl_Write, ^Z in middle ignored, Tcl_Gets crlf} {
+test io-31.24 {Tcl_Write, ^Z in middle ignored, Tcl_Gets crlf} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation crlf -eofchar {}
@@ -2136,7 +3615,7 @@ test io-8.24 {Tcl_Write, ^Z in middle ignored, Tcl_Gets crlf} {
     close $f
     set l
 } "abc def 0 \x1aqrs 0 tuv 0 {} 1"
-test io-8.25 {Tcl_Write lf, ^Z in middle, Tcl_Gets auto} {
+test io-31.25 {Tcl_Write lf, ^Z in middle, Tcl_Gets auto} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation lf
@@ -2154,7 +3633,7 @@ test io-8.25 {Tcl_Write lf, ^Z in middle, Tcl_Gets auto} {
     close $f
     set l
 } {abc def 0 {} 1}
-test io-8.26 {Tcl_Write lf, ^Z in middle, Tcl_Gets lf} {
+test io-31.26 {Tcl_Write lf, ^Z in middle, Tcl_Gets lf} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation lf
@@ -2172,7 +3651,7 @@ test io-8.26 {Tcl_Write lf, ^Z in middle, Tcl_Gets lf} {
     close $f
     set l
 } {abc def 0 {} 1}
-test io-8.27 {Tcl_Write cr, ^Z in middle, Tcl_Gets auto} {
+test io-31.27 {Tcl_Write cr, ^Z in middle, Tcl_Gets auto} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation cr -eofchar {}
@@ -2190,7 +3669,7 @@ test io-8.27 {Tcl_Write cr, ^Z in middle, Tcl_Gets auto} {
     close $f
     set l
 } {abc def 0 {} 1}
-test io-8.28 {Tcl_Write cr, ^Z in middle, Tcl_Gets cr} {
+test io-31.28 {Tcl_Write cr, ^Z in middle, Tcl_Gets cr} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation cr -eofchar {}
@@ -2208,7 +3687,7 @@ test io-8.28 {Tcl_Write cr, ^Z in middle, Tcl_Gets cr} {
     close $f
     set l
 } {abc def 0 {} 1}
-test io-8.29 {Tcl_Write crlf, ^Z in middle, Tcl_Gets auto} {
+test io-31.29 {Tcl_Write crlf, ^Z in middle, Tcl_Gets auto} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation crlf -eofchar {}
@@ -2226,7 +3705,7 @@ test io-8.29 {Tcl_Write crlf, ^Z in middle, Tcl_Gets auto} {
     close $f
     set l
 } {abc def 0 {} 1}
-test io-8.30 {Tcl_Write crlf, ^Z in middle, Tcl_Gets crlf} {
+test io-31.30 {Tcl_Write crlf, ^Z in middle, Tcl_Gets crlf} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation crlf -eofchar {}
@@ -2244,7 +3723,7 @@ test io-8.30 {Tcl_Write crlf, ^Z in middle, Tcl_Gets crlf} {
     close $f
     set l
 } {abc def 0 {} 1}
-test io-8.31 {Tcl_Write crlf on block boundary, Tcl_Gets auto} {
+test io-31.31 {Tcl_Write crlf on block boundary, Tcl_Gets crlf} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation crlf
@@ -2255,7 +3734,7 @@ test io-8.31 {Tcl_Write crlf on block boundary, Tcl_Gets auto} {
     }
     close $f
     set f [open test1 r]
-    fconfigure $f -translation auto
+    fconfigure $f -translation crlf 
     set c ""
     while {[gets $f line] >= 0} {
 	append c $line\n
@@ -2263,13 +3742,13 @@ test io-8.31 {Tcl_Write crlf on block boundary, Tcl_Gets auto} {
     close $f
     string length $c
 } [expr 700*15+1]
-test io-8.32 {Tcl_Write crlf on block boundary, Tcl_Gets auto} {
+test io-31.32 {Tcl_Write crlf on block boundary, Tcl_Gets auto} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation crlf
     set line "123456789ABCDE"	;# 14 char plus crlf
     puts -nonewline $f x	;# shift crlf across block boundary
-    for {set i 0} {$i < 256} {incr i} {
+    for {set i 0} {$i < 700} {incr i} {
 	puts $f $line
     }
     close $f
@@ -2281,24 +3760,24 @@ test io-8.32 {Tcl_Write crlf on block boundary, Tcl_Gets auto} {
     }
     close $f
     string length $c
-} [expr 256*15+1]
+} [expr 700*15+1]
 
 
 # Test Tcl_Read and buffering.
 
-test io-9.1 {Tcl_Read, channel not readable} {
+test io-32.1 {Tcl_Read, channel not readable} {
     list [catch {read stdout} msg] $msg
 } {1 {channel "stdout" wasn't opened for reading}}
-test io-9.2 {Tcl_Read, zero byte count} {
+test io-32.2 {Tcl_Read, zero byte count} {
     read stdin 0
 } ""
-test io-9.3 {Tcl_Read, negative byte count} {
+test io-32.3 {Tcl_Read, negative byte count} {
     set f [open longfile r]
     set l [list [catch {read $f -1} msg] $msg]
     close $f
     set l
 } {1 {bad argument "-1": should be "nonewline"}}
-test io-9.4 {Tcl_Read, positive byte count} {
+test io-32.4 {Tcl_Read, positive byte count} {
     set f [open longfile r]
     set x [read $f 1024]
     set s [string length $x]
@@ -2306,7 +3785,7 @@ test io-9.4 {Tcl_Read, positive byte count} {
     close $f
     set s
 } 1024
-test io-9.5 {Tcl_Read, multiple buffers} {
+test io-32.5 {Tcl_Read, multiple buffers} {
     set f [open longfile r]
     fconfigure $f -buffersize 100
     set x [read $f 1024]
@@ -2315,7 +3794,7 @@ test io-9.5 {Tcl_Read, multiple buffers} {
     close $f
     set s
 } 1024
-test io-9.6 {Tcl_Read, very large read} {
+test io-32.6 {Tcl_Read, very large read} {
     set f1 [open longfile r]
     set z [read $f1 1000000]
     close $f1
@@ -2323,11 +3802,11 @@ test io-9.6 {Tcl_Read, very large read} {
     set x ok
     set z [file size longfile]
     if {$z != $l} {
-        set x broken
+	set x broken
     }
     set x
 } ok
-test io-9.7 {Tcl_Read, nonblocking, file} {nonBlockFiles} {
+test io-32.7 {Tcl_Read, nonblocking, file} {nonBlockFiles} {
     set f1 [open longfile r]
     fconfigure $f1 -blocking off
     set z [read $f1 20]
@@ -2335,11 +3814,11 @@ test io-9.7 {Tcl_Read, nonblocking, file} {nonBlockFiles} {
     set l [string length $z]
     set x ok
     if {$l != 20} {
-        set x broken
+	set x broken
     }
     set x
 } ok
-test io-9.8 {Tcl_Read, nonblocking, file} {nonBlockFiles} {
+test io-32.8 {Tcl_Read, nonblocking, file} {nonBlockFiles} {
     set f1 [open longfile r]
     fconfigure $f1 -blocking off
     set z [read $f1 1000000]
@@ -2348,11 +3827,11 @@ test io-9.8 {Tcl_Read, nonblocking, file} {nonBlockFiles} {
     set l [string length $z]]
     set z [file size longfile]]
     if {$z != $l} {
-        set x broken
+	set x broken
     }
   set x
 } ok
-test io-9.9 {Tcl_Read, read to end of file} {
+test io-32.9 {Tcl_Read, read to end of file} {
     set f1 [open longfile r]
     set z [read $f1]
     close $f1
@@ -2360,11 +3839,11 @@ test io-9.9 {Tcl_Read, read to end of file} {
     set x ok
     set z [file size longfile]
     if {$z != $l} {
-        set x broken
+	set x broken
     }
     set x
 } ok
-test io-9.10 {Tcl_Read from a pipe} {stdio} {
+test io-32.10 {Tcl_Read from a pipe} {stdio} {
     removeFile pipe
     set f1 [open pipe w]
     puts $f1 {puts [gets stdin]}
@@ -2376,7 +3855,7 @@ test io-9.10 {Tcl_Read from a pipe} {stdio} {
     close $f1
     set x
 } "hello\n"
-test io-9.11 {Tcl_Read from a pipe} {stdio} {
+test io-32.11 {Tcl_Read from a pipe} {stdio} {
     removeFile pipe
     set f1 [open pipe w]
     puts $f1 {puts [gets stdin]}
@@ -2395,7 +3874,7 @@ test io-9.11 {Tcl_Read from a pipe} {stdio} {
 } {{hello
 } {hello
 }}
-test io-9.12 {Tcl_Read, -nonewline} {
+test io-32.12 {Tcl_Read, -nonewline} {
     removeFile test1
     set f1 [open test1 w]
     puts $f1 hello
@@ -2407,7 +3886,7 @@ test io-9.12 {Tcl_Read, -nonewline} {
     set c
 } {hello
 bye}
-test io-9.13 {Tcl_Read, -nonewline} {
+test io-32.13 {Tcl_Read, -nonewline} {
     removeFile test1
     set f1 [open test1 w]
     puts $f1 hello
@@ -2419,7 +3898,7 @@ test io-9.13 {Tcl_Read, -nonewline} {
     list [string length $c] $c
 } {9 {hello
 bye}}
-test io-9.14 {Tcl_Read, reading in small chunks} {
+test io-32.14 {Tcl_Read, reading in small chunks} {
     removeFile test1
     set f [open test1 w]
     puts $f "Two lines: this one"
@@ -2432,7 +3911,7 @@ test io-9.14 {Tcl_Read, reading in small chunks} {
 } {T wo { lines: this one
 and this one
 }}
-test io-9.15 {Tcl_Read, asking for more input than available} {
+test io-32.15 {Tcl_Read, asking for more input than available} {
     removeFile test1
     set f [open test1 w]
     puts $f "Two lines: this one"
@@ -2445,7 +3924,7 @@ test io-9.15 {Tcl_Read, asking for more input than available} {
 } {Two lines: this one
 and this one
 }
-test io-9.16 {Tcl_Read, read to end of file with -nonewline} {
+test io-32.16 {Tcl_Read, read to end of file with -nonewline} {
     removeFile test1
     set f [open test1 w]
     puts $f "Two lines: this one"
@@ -2460,7 +3939,7 @@ and this one}
 
 # Test Tcl_Gets.
 
-test io-10.1 {Tcl_Gets, reading what was written} {
+test io-33.1 {Tcl_Gets, reading what was written} {
     removeFile test1
     set f1 [open test1 w]
     set y "first line"
@@ -2470,23 +3949,23 @@ test io-10.1 {Tcl_Gets, reading what was written} {
     set x [gets $f1]
     set z ok
     if {"$x" != "$y"} {
-        set z broken
+	set z broken
     }
     close $f1
     set z
 } ok
-test io-10.2 {Tcl_Gets into variable} {
+test io-33.2 {Tcl_Gets into variable} {
     set f1 [open longfile r]
     set c [gets $f1 x]
     set l [string length x]
     set z ok
     if {$l != $l} {
-        set z broken
+	set z broken
     }
     close $f1
     set z
 } ok
-test io-10.3 {Tcl_Gets from pipe} {stdio} {
+test io-33.3 {Tcl_Gets from pipe} {stdio} {
     removeFile pipe
     set f1 [open pipe w]
     puts $f1 {puts [gets stdin]}
@@ -2498,11 +3977,11 @@ test io-10.3 {Tcl_Gets from pipe} {stdio} {
     close $f1
     set z ok
     if {"$x" != "hello"} {
-        set z broken
+	set z broken
     }
     set z
 } ok
-test io-10.4 {Tcl_Gets with long line} {
+test io-33.4 {Tcl_Gets with long line} {
     removeFile test3
     set f [open test3 w]
     puts -nonewline $f "abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ"
@@ -2516,13 +3995,13 @@ test io-10.4 {Tcl_Gets with long line} {
     close $f
     set x
 } {abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ}
-test io-10.5 {Tcl_Gets with long line} {
+test io-33.5 {Tcl_Gets with long line} {
     set f [open test3]
     set x [gets $f y]
     close $f
     list $x $y
 } {260 abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ}
-test io-10.6 {Tcl_Gets and end of file} {
+test io-33.6 {Tcl_Gets and end of file} {
     removeFile test3
     set f [open test3 w]
     puts -nonewline $f "Test1\nTest2"
@@ -2538,7 +4017,7 @@ test io-10.6 {Tcl_Gets and end of file} {
     close $f
     set x
 } {5 Test1 5 Test2 -1 {}}
-test io-10.7 {Tcl_Gets and bad variable} {
+test io-33.7 {Tcl_Gets and bad variable} {
     set f [open test3 w]
     puts $f "Line 1"
     puts $f "Line 2"
@@ -2550,7 +4029,7 @@ test io-10.7 {Tcl_Gets and bad variable} {
     close $f
     set result
 } {1 {can't set "x(0)": variable isn't array}}
-test io-10.8 {Tcl_Gets, exercising double buffering} {
+test io-33.8 {Tcl_Gets, exercising double buffering} {
     set f [open test3 w]
     fconfigure $f -translation lf -eofchar {}
     set x ""
@@ -2563,7 +4042,7 @@ test io-10.8 {Tcl_Gets, exercising double buffering} {
     close $f
     set y
 } 100
-test io-10.9 {Tcl_Gets, exercising double buffering} {
+test io-33.9 {Tcl_Gets, exercising double buffering} {
     set f [open test3 w]
     fconfigure $f -translation lf -eofchar {}
     set x ""
@@ -2576,7 +4055,7 @@ test io-10.9 {Tcl_Gets, exercising double buffering} {
     close $f
     set y
 } 200
-test io-10.10 {Tcl_Gets, exercising double buffering} {
+test io-33.10 {Tcl_Gets, exercising double buffering} {
     set f [open test3 w]
     fconfigure $f -translation lf -eofchar {}
     set x ""
@@ -2592,14 +4071,14 @@ test io-10.10 {Tcl_Gets, exercising double buffering} {
 
 # Test Tcl_Seek and Tcl_Tell.
 
-test io-11.1 {Tcl_Seek to current position at start of file} {
+test io-34.1 {Tcl_Seek to current position at start of file} {
     set f1 [open longfile r]
     seek $f1 0 current
     set c [tell $f1]
     close $f1
     set c
 } 0
-test io-11.2 {Tcl_Seek to offset from start} {
+test io-34.2 {Tcl_Seek to offset from start} {
     removeFile test1
     set f1 [open test1 w]
     fconfigure $f1 -translation lf -eofchar {}
@@ -2612,7 +4091,7 @@ test io-11.2 {Tcl_Seek to offset from start} {
     close $f1
     set c
 } 10
-test io-11.3 {Tcl_Seek to end of file} {
+test io-34.3 {Tcl_Seek to end of file} {
     removeFile test1
     set f1 [open test1 w]
     fconfigure $f1 -translation lf -eofchar {}
@@ -2625,7 +4104,7 @@ test io-11.3 {Tcl_Seek to end of file} {
     close $f1
     set c
 } 54
-test io-11.4 {Tcl_Seek to offset from end of file} {
+test io-34.4 {Tcl_Seek to offset from end of file} {
     removeFile test1
     set f1 [open test1 w]
     fconfigure $f1 -translation lf -eofchar {}
@@ -2638,7 +4117,7 @@ test io-11.4 {Tcl_Seek to offset from end of file} {
     close $f1
     set c
 } 44
-test io-11.5 {Tcl_Seek to offset from current position} {
+test io-34.5 {Tcl_Seek to offset from current position} {
     removeFile test1
     set f1 [open test1 w]
     fconfigure $f1 -translation lf -eofchar {}
@@ -2652,7 +4131,7 @@ test io-11.5 {Tcl_Seek to offset from current position} {
     close $f1
     set c
 } 20
-test io-11.6 {Tcl_Seek to offset from end of file} {
+test io-34.6 {Tcl_Seek to offset from end of file} {
     removeFile test1
     set f1 [open test1 w]
     fconfigure $f1 -translation lf -eofchar {}
@@ -2667,7 +4146,7 @@ test io-11.6 {Tcl_Seek to offset from end of file} {
     list $c $r
 } {44 {rstuvwxyz
 }}
-test io-11.7 {Tcl_Seek to offset from end of file, then to current position} {
+test io-34.7 {Tcl_Seek to offset from end of file, then to current position} {
     removeFile test1
     set f1 [open test1 w]
     fconfigure $f1 -translation lf -eofchar {}
@@ -2683,14 +4162,14 @@ test io-11.7 {Tcl_Seek to offset from end of file, then to current position} {
     close $f1
     list $c1 $r1 $c2
 } {44 rstuv 49}
-test io-11.8 {Tcl_Seek on pipes: not supported} {stdio} {
+test io-34.8 {Tcl_Seek on pipes: not supported} {stdio} {
     set f1 [open "|[list $tcltest]" r+]
     set x [list [catch {seek $f1 0 current} msg] $msg]
     close $f1
     regsub {".*":} $x {"":} x
     string tolower $x
 } {1 {error during seek on "": invalid argument}}
-test io-11.9 {Tcl_Seek, testing buffered input flushing} {
+test io-34.9 {Tcl_Seek, testing buffered input flushing} {
     removeFile test3
     set f [open test3 w]
     fconfigure $f -eofchar {}
@@ -2713,7 +4192,7 @@ test io-11.9 {Tcl_Seek, testing buffered input flushing} {
     close $f
     set x
 } {a d a l Y {} b}
-test io-11.10 {Tcl_Seek testing flushing of buffered input} {
+test io-34.10 {Tcl_Seek testing flushing of buffered input} {
     set f [open test3 w]
     fconfigure $f -translation lf
     puts $f xyz\n123
@@ -2727,7 +4206,7 @@ test io-11.10 {Tcl_Seek testing flushing of buffered input} {
     list $x [viewFile test3]
 } "xyz {xyz
 456}"
-test io-11.11 {Tcl_Seek testing flushing of buffered output} {
+test io-34.11 {Tcl_Seek testing flushing of buffered output} {
     set f [open test3 w]
     puts $f xyz\n123
     close $f
@@ -2738,7 +4217,7 @@ test io-11.11 {Tcl_Seek testing flushing of buffered output} {
     close $f
     list $x [viewFile test3]
 } "zzy xyzzy"
-test io-11.12 {Tcl_Seek testing combination of write, seek back and read} {
+test io-34.12 {Tcl_Seek testing combination of write, seek back and read} {
     set f [open test3 w]
     fconfigure $f -translation lf -eofchar {}
     puts $f xyz\n123
@@ -2755,14 +4234,14 @@ test io-11.12 {Tcl_Seek testing combination of write, seek back and read} {
 } {14 {xyz
 123
 xyzzy} zzy}
-test io-11.13 {Tcl_Tell at start of file} {
+test io-34.13 {Tcl_Tell at start of file} {
     removeFile test1
     set f1 [open test1 w]
     set p [tell $f1]
     close $f1
     set p
 } 0
-test io-11.14 {Tcl_Tell after seek to end of file} {
+test io-34.14 {Tcl_Tell after seek to end of file} {
     removeFile test1
     set f1 [open test1 w]
     fconfigure $f1 -translation lf -eofchar {}
@@ -2775,7 +4254,7 @@ test io-11.14 {Tcl_Tell after seek to end of file} {
     close $f1
     set c1
 } 54
-test io-11.15 {Tcl_Tell combined with seeking} {
+test io-34.15 {Tcl_Tell combined with seeking} {
     removeFile test1
     set f1 [open test1 w]
     fconfigure $f1 -translation lf -eofchar {}
@@ -2790,13 +4269,13 @@ test io-11.15 {Tcl_Tell combined with seeking} {
     close $f1
     list $c1 $c2
 } {10 20}
-test io-11.16 {Tcl_tell on pipe: always -1} {stdio} {
+test io-34.16 {Tcl_tell on pipe: always -1} {stdio} {
     set f1 [open "|[list $tcltest]" r+]
     set c [tell $f1]
     close $f1
     set c
 } -1
-test io-11.17 {Tcl_Tell on pipe: always -1} {stdio} {
+test io-34.17 {Tcl_Tell on pipe: always -1} {stdio} {
     set f1 [open "|[list $tcltest]" r+]
     puts $f1 {puts hello}
     flush $f1
@@ -2805,7 +4284,7 @@ test io-11.17 {Tcl_Tell on pipe: always -1} {stdio} {
     close $f1
     set c
 } -1
-test io-11.18 {Tcl_Tell combined with seeking and reading} {
+test io-34.18 {Tcl_Tell combined with seeking and reading} {
     removeFile test2
     set f [open test2 w]
     fconfigure $f -translation lf -eofchar {}
@@ -2825,7 +4304,7 @@ test io-11.18 {Tcl_Tell combined with seeking and reading} {
     close $f
     set x
 } {0 3 2 12 30}
-test io-11.19 {Tcl_Tell combined with opening in append mode} {
+test io-34.19 {Tcl_Tell combined with opening in append mode} {
     set f [open test3 w]
     fconfigure $f -translation lf -eofchar {}
     puts $f "abcdefghijklmnopqrstuvwxyz"
@@ -2836,7 +4315,7 @@ test io-11.19 {Tcl_Tell combined with opening in append mode} {
     close $f
     set c
 } 54
-test io-11.20 {Tcl_Tell combined with writing} {
+test io-34.20 {Tcl_Tell combined with writing} {
     set f [open test3 w]
     set l ""
     seek $f 29 start
@@ -2854,7 +4333,7 @@ test io-11.20 {Tcl_Tell combined with writing} {
 
 # Test Tcl_Eof
 
-test io-12.1 {Tcl_Eof} {
+test io-35.1 {Tcl_Eof} {
     removeFile test1
     set f [open test1 w]
     puts $f hello
@@ -2873,7 +4352,7 @@ test io-12.1 {Tcl_Eof} {
     close $f
     set x
 } {0 0 0 0 1 1}
-test io-12.2 {Tcl_Eof with pipe} {stdio} {
+test io-35.2 {Tcl_Eof with pipe} {stdio} {
     removeFile pipe
     set f1 [open pipe w]
     puts $f1 {gets stdin}
@@ -2891,7 +4370,7 @@ test io-12.2 {Tcl_Eof with pipe} {stdio} {
     close $f1
     set x
 } {0 0 0 1}
-test io-12.3 {Tcl_Eof with pipe} {stdio} {
+test io-35.3 {Tcl_Eof with pipe} {stdio} {
     removeFile pipe
     set f1 [open pipe w]
     puts $f1 {gets stdin}
@@ -2913,7 +4392,7 @@ test io-12.3 {Tcl_Eof with pipe} {stdio} {
     close $f1
     set x
 } {0 0 0 1 1 1}
-test io-12.4 {Tcl_Eof, eof detection on nonblocking file} {nonBlockFiles} {
+test io-35.4 {Tcl_Eof, eof detection on nonblocking file} {nonBlockFiles} {
     removeFile test1
     set f [open test1 w]
     close $f
@@ -2925,7 +4404,7 @@ test io-12.4 {Tcl_Eof, eof detection on nonblocking file} {nonBlockFiles} {
     close $f
     set l
 } {{} 1}
-test io-12.5 {Tcl_Eof, eof detection on nonblocking pipe} {stdio} {
+test io-35.5 {Tcl_Eof, eof detection on nonblocking pipe} {stdio} {
     removeFile pipe
     set f [open pipe w]
     puts $f {
@@ -2939,7 +4418,7 @@ test io-12.5 {Tcl_Eof, eof detection on nonblocking pipe} {stdio} {
     close $f
     set l
 } {{} 1}
-test io-12.6 {Tcl_Eof, eof char, lf write, auto read} {
+test io-35.6 {Tcl_Eof, eof char, lf write, auto read} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation lf -eofchar \x1a
@@ -2953,7 +4432,7 @@ test io-12.6 {Tcl_Eof, eof char, lf write, auto read} {
     close $f
     list $s $l $e
 } {9 8 1}
-test io-12.7 {Tcl_Eof, eof char, lf write, lf read} {
+test io-35.7 {Tcl_Eof, eof char, lf write, lf read} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation lf -eofchar \x1a
@@ -2967,7 +4446,7 @@ test io-12.7 {Tcl_Eof, eof char, lf write, lf read} {
     close $f
     list $s $l $e
 } {9 8 1}
-test io-12.8 {Tcl_Eof, eof char, cr write, auto read} {
+test io-35.8 {Tcl_Eof, eof char, cr write, auto read} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation cr -eofchar \x1a
@@ -2981,7 +4460,7 @@ test io-12.8 {Tcl_Eof, eof char, cr write, auto read} {
     close $f
     list $s $l $e
 } {9 8 1}
-test io-12.9 {Tcl_Eof, eof char, cr write, cr read} {
+test io-35.9 {Tcl_Eof, eof char, cr write, cr read} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation cr -eofchar \x1a
@@ -2995,7 +4474,7 @@ test io-12.9 {Tcl_Eof, eof char, cr write, cr read} {
     close $f
     list $s $l $e
 } {9 8 1}
-test io-12.10 {Tcl_Eof, eof char, crlf write, auto read} {
+test io-35.10 {Tcl_Eof, eof char, crlf write, auto read} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation crlf -eofchar \x1a
@@ -3009,7 +4488,7 @@ test io-12.10 {Tcl_Eof, eof char, crlf write, auto read} {
     close $f
     list $s $l $e
 } {11 8 1}
-test io-12.11 {Tcl_Eof, eof char, crlf write, crlf read} {
+test io-35.11 {Tcl_Eof, eof char, crlf write, crlf read} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation crlf -eofchar \x1a
@@ -3023,7 +4502,7 @@ test io-12.11 {Tcl_Eof, eof char, crlf write, crlf read} {
     close $f
     list $s $l $e
 } {11 8 1}
-test io-12.12 {Tcl_Eof, eof char in middle, lf write, auto read} {
+test io-35.12 {Tcl_Eof, eof char in middle, lf write, auto read} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation lf -eofchar {}
@@ -3038,7 +4517,7 @@ test io-12.12 {Tcl_Eof, eof char in middle, lf write, auto read} {
     close $f
     list $c $l $e
 } {17 8 1}
-test io-12.13 {Tcl_Eof, eof char in middle, lf write, lf read} {
+test io-35.13 {Tcl_Eof, eof char in middle, lf write, lf read} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation lf -eofchar {}
@@ -3053,7 +4532,7 @@ test io-12.13 {Tcl_Eof, eof char in middle, lf write, lf read} {
     close $f
     list $c $l $e
 } {17 8 1}
-test io-12.14 {Tcl_Eof, eof char in middle, cr write, auto read} {
+test io-35.14 {Tcl_Eof, eof char in middle, cr write, auto read} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation cr -eofchar {}
@@ -3068,7 +4547,7 @@ test io-12.14 {Tcl_Eof, eof char in middle, cr write, auto read} {
     close $f
     list $c $l $e
 } {17 8 1}
-test io-12.15 {Tcl_Eof, eof char in middle, cr write, cr read} {
+test io-35.15 {Tcl_Eof, eof char in middle, cr write, cr read} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation cr -eofchar {}
@@ -3083,7 +4562,7 @@ test io-12.15 {Tcl_Eof, eof char in middle, cr write, cr read} {
     close $f
     list $c $l $e
 } {17 8 1}
-test io-12.16 {Tcl_Eof, eof char in middle, crlf write, auto read} {
+test io-35.16 {Tcl_Eof, eof char in middle, crlf write, auto read} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation crlf -eofchar {}
@@ -3098,7 +4577,7 @@ test io-12.16 {Tcl_Eof, eof char in middle, crlf write, auto read} {
     close $f
     list $c $l $e
 } {21 8 1}
-test io-12.17 {Tcl_Eof, eof char in middle, crlf write, crlf read} {
+test io-35.17 {Tcl_Eof, eof char in middle, crlf write, crlf read} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation crlf -eofchar {}
@@ -3116,7 +4595,7 @@ test io-12.17 {Tcl_Eof, eof char in middle, crlf write, crlf read} {
 
 # Test Tcl_InputBlocked
 
-test io-13.1 {Tcl_InputBlocked on nonblocking pipe} {unixOrPc tempNotPc} {
+test io-36.1 {Tcl_InputBlocked on nonblocking pipe} {stdio} {
     set f1 [open "|[list $tcltest]" r+]
     puts $f1 {puts hello_from_pipe}
     flush $f1
@@ -3135,7 +4614,7 @@ test io-13.1 {Tcl_InputBlocked on nonblocking pipe} {unixOrPc tempNotPc} {
     close $f1
     set x
 } {{} 1 hello 0 {} 1}
-test io-13.2 {Tcl_InputBlocked on blocking pipe} {unixOrPc tempNotPc} {
+test io-36.2 {Tcl_InputBlocked on blocking pipe} {stdio} {
     set f1 [open "|[list $tcltest]" r+]
     fconfigure $f1 -buffering line
     puts $f1 {puts hello_from_pipe}
@@ -3149,7 +4628,7 @@ test io-13.2 {Tcl_InputBlocked on blocking pipe} {unixOrPc tempNotPc} {
     close $f1
     set x
 } {hello_from_pipe 0 {} 0 1}
-test io-13.3 {Tcl_InputBlocked vs files, short read} {
+test io-36.3 {Tcl_InputBlocked vs files, short read} {
     removeFile test1
     set f [open test1 w]
     puts $f abcdefghijklmnop
@@ -3165,7 +4644,7 @@ test io-13.3 {Tcl_InputBlocked vs files, short read} {
     close $f
     set l
 } {0 abc 0 defghijklmnop 0 1}
-test io-13.4 {Tcl_InputBlocked vs files, event driven read} {
+test io-36.4 {Tcl_InputBlocked vs files, event driven read} {
     proc in {f} {
         global l x
 	lappend l [read $f 3]
@@ -3182,7 +4661,7 @@ test io-13.4 {Tcl_InputBlocked vs files, event driven read} {
     set l
 } {abc def ghi jkl mno {p
 } eof}
-test io-13.5 {Tcl_InputBlocked vs files, short read, nonblocking} {nonBlockFiles} {
+test io-36.5 {Tcl_InputBlocked vs files, short read, nonblocking} {nonBlockFiles} {
     removeFile test1
     set f [open test1 w]
     puts $f abcdefghijklmnop
@@ -3199,7 +4678,7 @@ test io-13.5 {Tcl_InputBlocked vs files, short read, nonblocking} {nonBlockFiles
     close $f
     set l
 } {0 abc 0 defghijklmnop 0 1}
-test io-13.6 {Tcl_InputBlocked vs files, event driven read} {nonBlockFiles} {
+test io-36.6 {Tcl_InputBlocked vs files, event driven read} {nonBlockFiles} {
     proc in {f} {
         global l x
 	lappend l [read $f 3]
@@ -3220,7 +4699,7 @@ test io-13.6 {Tcl_InputBlocked vs files, event driven read} {nonBlockFiles} {
 
 # Test Tcl_InputBuffered
 
-test io-14.1 {Tcl_InputBuffered} {
+test io-37.1 {Tcl_InputBuffered} {
     set f [open longfile r]
     fconfigure $f -buffersize 4096
     read $f 3
@@ -3230,7 +4709,7 @@ test io-14.1 {Tcl_InputBuffered} {
     close $f
     set l
 } {4093 3}
-test io-14.2 {Tcl_InputBuffered, test input flushing on seek} {
+test io-37.2 {Tcl_InputBuffered, test input flushing on seek} {
     set f [open longfile r]
     fconfigure $f -buffersize 4096
     read $f 3
@@ -3246,13 +4725,13 @@ test io-14.2 {Tcl_InputBuffered, test input flushing on seek} {
 
 # Test Tcl_SetChannelBufferSize, Tcl_GetChannelBufferSize
 
-test io-15.1 {Tcl_GetChannelBufferSize, default buffer size} {
+test io-38.1 {Tcl_GetChannelBufferSize, default buffer size} {
     set f [open longfile r]
     set s [fconfigure $f -buffersize]
     close $f
     set s
 } 4096
-test io-15.2 {Tcl_SetChannelBufferSize, Tcl_GetChannelBufferSize} {
+test io-38.2 {Tcl_SetChannelBufferSize, Tcl_GetChannelBufferSize} {
     set f [open longfile r]
     set l ""
     lappend l [fconfigure $f -buffersize]
@@ -3274,7 +4753,7 @@ test io-15.2 {Tcl_SetChannelBufferSize, Tcl_GetChannelBufferSize} {
 
 # Test Tcl_SetChannelOption, Tcl_GetChannelOption
 
-test io-16.1 {Tcl_GetChannelOption} {
+test io-39.1 {Tcl_GetChannelOption} {
     removeFile test1
     set f1 [open test1 w]
     set x [fconfigure $f1 -blocking]
@@ -3284,14 +4763,14 @@ test io-16.1 {Tcl_GetChannelOption} {
 #
 # Test 17.2 was removed.
 #
-test io-16.2 {Tcl_GetChannelOption} {
+test io-39.2 {Tcl_GetChannelOption} {
     removeFile test1
     set f1 [open test1 w]
     set x [fconfigure $f1 -buffering]
     close $f1
     set x
 } full
-test io-16.3 {Tcl_GetChannelOption} {
+test io-39.3 {Tcl_GetChannelOption} {
     removeFile test1
     set f1 [open test1 w]
     fconfigure $f1 -buffering line
@@ -3299,7 +4778,7 @@ test io-16.3 {Tcl_GetChannelOption} {
     close $f1
     set x
 } line
-test io-16.4 {Tcl_GetChannelOption, Tcl_SetChannelOption} {
+test io-39.4 {Tcl_GetChannelOption, Tcl_SetChannelOption} {
     removeFile test1
     set f1 [open test1 w]
     set l ""
@@ -3315,7 +4794,7 @@ test io-16.4 {Tcl_GetChannelOption, Tcl_SetChannelOption} {
     close $f1
     set l
 } {full line none line full}
-test io-16.5 {Tcl_GetChannelOption, invariance} {
+test io-39.5 {Tcl_GetChannelOption, invariance} {
     removeFile test1
     set f1 [open test1 w]
     set l ""
@@ -3325,7 +4804,7 @@ test io-16.5 {Tcl_GetChannelOption, invariance} {
     close $f1
     set l
 } {full {1 {bad value for -buffering: must be one of full, line, or none}} full}
-test io-16.6 {Tcl_SetChannelOption, multiple options} {
+test io-39.6 {Tcl_SetChannelOption, multiple options} {
     removeFile test1
     set f1 [open test1 w]
     fconfigure $f1 -translation lf -buffering line
@@ -3335,7 +4814,7 @@ test io-16.6 {Tcl_SetChannelOption, multiple options} {
     close $f1
     set x
 } 10
-test io-16.7 {Tcl_SetChannelOption, buffering, translation} {
+test io-39.7 {Tcl_SetChannelOption, buffering, translation} {
     removeFile test1
     set f1 [open test1 w]
     fconfigure $f1 -translation lf
@@ -3349,7 +4828,7 @@ test io-16.7 {Tcl_SetChannelOption, buffering, translation} {
     close $f1
     set x
 } {0 21}
-test io-16.8 {Tcl_SetChannelOption, different buffering options} {
+test io-39.8 {Tcl_SetChannelOption, different buffering options} {
     removeFile test1
     set f1 [open test1 w]
     set l ""
@@ -3369,7 +4848,7 @@ test io-16.8 {Tcl_SetChannelOption, different buffering options} {
     lappend l [file size test1]
     set l
 } {5 10 10 10 20 20}
-test io-16.9 {Tcl_SetChannelOption, blocking mode} {nonBlockFiles} {
+test io-39.9 {Tcl_SetChannelOption, blocking mode} {nonBlockFiles} {
     removeFile test1
     set f1 [open test1 w]
     close $f1
@@ -3385,13 +4864,15 @@ test io-16.9 {Tcl_SetChannelOption, blocking mode} {nonBlockFiles} {
     close $f1
     set x
 } {1 0 {} {} 0 1}
-test io-16.10 {Tcl_SetChannelOption, blocking mode} {unixOrPc tempNotPc} {
+test io-39.10 {Tcl_SetChannelOption, blocking mode} {stdio} {
     removeFile pipe
     set f1 [open pipe w]
-    puts $f1 {gets stdin}
-    puts $f1 {after 100}
-    puts $f1 {puts hi}
-    puts $f1 {gets stdin}
+    puts $f1 {
+	gets stdin
+	after 100
+	puts hi
+	gets stdin
+    }
     close $f1
     set x ""
     set f1 [open "|[list $tcltest pipe]" r+]
@@ -3399,10 +4880,14 @@ test io-16.10 {Tcl_SetChannelOption, blocking mode} {unixOrPc tempNotPc} {
     lappend x [fconfigure $f1 -blocking]
     lappend x [gets $f1]
     lappend x [fblocked $f1]
+    fconfigure $f1 -blocking on
     puts $f1 hello
+    fconfigure $f1 -blocking off
     lappend x [gets $f1]
     lappend x [fblocked $f1]
+    fconfigure $f1 -blocking on
     puts $f1 bye
+    fconfigure $f1 -blocking off
     lappend x [gets $f1]
     lappend x [fblocked $f1]
     fconfigure $f1 -blocking on
@@ -3415,7 +4900,7 @@ test io-16.10 {Tcl_SetChannelOption, blocking mode} {unixOrPc tempNotPc} {
     close $f1
     set x
 } {0 {} 1 {} 1 {} 1 1 hi 0 0 {} 1}
-test io-16.11 {Tcl_SetChannelOption, Tcl_GetChannelOption, buffer size} {
+test io-39.11 {Tcl_SetChannelOption, Tcl_GetChannelOption, buffer size} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -buffersize -10
@@ -3423,7 +4908,7 @@ test io-16.11 {Tcl_SetChannelOption, Tcl_GetChannelOption, buffer size} {
     close $f
     set x
 } 4096
-test io-16.12 {Tcl_SetChannelOption, Tcl_GetChannelOption buffer size} {
+test io-39.12 {Tcl_SetChannelOption, Tcl_GetChannelOption buffer size} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -buffersize 10000000
@@ -3431,7 +4916,7 @@ test io-16.12 {Tcl_SetChannelOption, Tcl_GetChannelOption buffer size} {
     close $f
     set x
 } 4096
-test io-16.13 {Tcl_SetChannelOption, Tcl_GetChannelOption, buffer size} {
+test io-39.13 {Tcl_SetChannelOption, Tcl_GetChannelOption, buffer size} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -buffersize 40000
@@ -3439,7 +4924,61 @@ test io-16.13 {Tcl_SetChannelOption, Tcl_GetChannelOption, buffer size} {
     close $f
     set x
 } 40000
-test io-16.14 {Tcl_SetChannelOption, setting read mode independently} \
+test io-39.13 {Tcl_SetChannelOption: -encoding, binary & utf-8} {
+    removeFile test1
+    set f [open test1 w]
+    fconfigure $f -encoding {} 
+    puts -nonewline $f \xe7\x89\xa6
+    close $f
+    set f [open test1 r]
+    fconfigure $f -encoding utf-8
+    set x [read $f]
+    close $f
+    set x
+} \u7266
+test io-39.14 {Tcl_SetChannelOption: -encoding, binary & utf-8} {
+    removeFile test1
+    set f [open test1 w]
+    fconfigure $f -encoding binary
+    puts -nonewline $f \xe7\x89\xa6
+    close $f
+    set f [open test1 r]
+    fconfigure $f -encoding utf-8
+    set x [read $f]
+    close $f
+    set x
+} \u7266
+test io-39.14 {Tcl_SetChannelOption: -encoding, errors} {
+    removeFile test1
+    set f [open test1 w]
+    set result [list [catch {fconfigure $f -encoding foobar} msg] $msg]
+    close $f
+    set result
+} {1 {unknown encoding "foobar"}}
+test io-39.14 {Tcl_SetChannelOption: -encoding, clearing CHANNEL_NEED_MORE_DATA} {stdio} {
+    set f [open "|[list $tcltest cat]" r+]
+    fconfigure $f -encoding binary
+    puts -nonewline $f "\xe7"
+    flush $f
+    fconfigure $f -encoding utf-8 -blocking 0
+    set x {}
+    fileevent $f readable { lappend x [read $f] }
+    vwait x
+    after 300 { lappend x timeout }
+    vwait x
+    fconfigure $f -encoding utf-8
+    vwait x
+    after 300 { lappend x timeout }
+    vwait x
+    fconfigure $f -encoding binary
+    vwait x
+    after 300 { lappend x timeout }
+    vwait x
+    close $f
+    set x
+} "{} timeout {} timeout \xe7 timeout"
+
+test io-39.14 {Tcl_SetChannelOption, setting read mode independently} \
 	{socket} {
     proc accept {s a p} {close $s}
     set s1 [socket -server accept 0]
@@ -3452,7 +4991,7 @@ test io-16.14 {Tcl_SetChannelOption, setting read mode independently} \
     close $s2
     set modes
 } {auto lf}
-test io-16.15 {Tcl_SetChannelOption, setting read mode independently} \
+test io-39.15 {Tcl_SetChannelOption, setting read mode independently} \
 	{socket} {
     proc accept {s a p} {close $s}
     set s1 [socket -server accept 0]
@@ -3465,7 +5004,7 @@ test io-16.15 {Tcl_SetChannelOption, setting read mode independently} \
     close $s2
     set modes
 } {auto crlf}
-test io-16.16 {Tcl_SetChannelOption, setting read mode independently} \
+test io-39.16 {Tcl_SetChannelOption, setting read mode independently} \
 	{socket} {
     proc accept {s a p} {close $s}
     set s1 [socket -server accept 0]
@@ -3478,7 +5017,7 @@ test io-16.16 {Tcl_SetChannelOption, setting read mode independently} \
     close $s2
     set modes
 } {auto cr}
-test io-16.17 {Tcl_SetChannelOption, setting read mode independently} \
+test io-39.17 {Tcl_SetChannelOption, setting read mode independently} \
 	{socket} {
     proc accept {s a p} {close $s}
     set s1 [socket -server accept 0]
@@ -3492,7 +5031,7 @@ test io-16.17 {Tcl_SetChannelOption, setting read mode independently} \
     set modes
 } {auto crlf}
 
-test io-17.1 {POSIX open access modes: RDWR} {
+test io-40.1 {POSIX open access modes: RDWR} {
     removeFile test3
     set f [open test3 w]
     puts $f xyzzy
@@ -3507,7 +5046,7 @@ test io-17.1 {POSIX open access modes: RDWR} {
     close $f
     set x
 } {zzy abzzy}
-test io-17.2 {POSIX open access modes: CREAT} {unixOnly} {
+test io-40.2 {POSIX open access modes: CREAT} {unixOnly} {
     removeFile test3
     set f [open test3 {WRONLY CREAT} 0600]
     file stat test3 stats
@@ -3519,7 +5058,7 @@ test io-17.2 {POSIX open access modes: CREAT} {unixOnly} {
     close $f
     set x
 } {0600 {line 1}}
-test io-17.3 {POSIX open access modes: CREAT} {$testConfig(unix) && ([exec umask] == 2)} {
+test io-40.3 {POSIX open access modes: CREAT} {$testConfig(unix) && ([exec umask] == 2)} {
     # This test only works if your umask is 2, like ouster's.
     removeFile test3
     set f [open test3 {WRONLY CREAT}]
@@ -3527,7 +5066,7 @@ test io-17.3 {POSIX open access modes: CREAT} {$testConfig(unix) && ([exec umask
     file stat test3 stats
     format "0%o" [expr $stats(mode)&0777]
 } 0664
-test io-17.4 {POSIX open access modes: CREAT} {
+test io-40.4 {POSIX open access modes: CREAT} {
     removeFile test3
     set f [open test3 w]
     fconfigure $f -eofchar {}
@@ -3542,7 +5081,7 @@ test io-17.4 {POSIX open access modes: CREAT} {
     close $f
     set x
 } abzzy
-test io-17.5 {POSIX open access modes: APPEND} {
+test io-40.5 {POSIX open access modes: APPEND} {
     removeFile test3
     set f [open test3 w]
     fconfigure $f -translation lf -eofchar {}
@@ -3563,7 +5102,7 @@ test io-17.5 {POSIX open access modes: APPEND} {
     close $f
     set x
 } {{new line} abc}
-test io-17.6 {POSIX open access modes: EXCL} {
+test io-40.6 {POSIX open access modes: EXCL} {
     removeFile test3
     set f [open test3 w]
     puts $f xyzzy
@@ -3572,7 +5111,7 @@ test io-17.6 {POSIX open access modes: EXCL} {
     regsub " already " $msg " " msg
     string tolower $msg
 } {1 {couldn't open "test3": file exists}}
-test io-17.7 {POSIX open access modes: EXCL} {
+test io-40.7 {POSIX open access modes: EXCL} {
     removeFile test3
     set f [open test3 {WRONLY CREAT EXCL}]
     fconfigure $f -eofchar {}
@@ -3580,7 +5119,7 @@ test io-17.7 {POSIX open access modes: EXCL} {
     close $f
     viewFile test3
 } {A test line}
-test io-17.8 {POSIX open access modes: TRUNC} {
+test io-40.8 {POSIX open access modes: TRUNC} {
     removeFile test3
     set f [open test3 w]
     puts $f xyzzy
@@ -3593,7 +5132,7 @@ test io-17.8 {POSIX open access modes: TRUNC} {
     close $f
     set x
 } abc
-test io-17.9 {POSIX open access modes: NONBLOCK} {nonPortable macOrUnix} {
+test io-40.9 {POSIX open access modes: NONBLOCK} {nonPortable macOrUnix} {
     removeFile test3
     set f [open test3 {WRONLY NONBLOCK CREAT}]
     puts $f "NONBLOCK test"
@@ -3603,7 +5142,7 @@ test io-17.9 {POSIX open access modes: NONBLOCK} {nonPortable macOrUnix} {
     close $f
     set x
 } {NONBLOCK test}
-test io-17.10 {POSIX open access modes: RDONLY} {
+test io-40.10 {POSIX open access modes: RDONLY} {
     set f [open test1 w]
     puts $f "two lines: this one"
     puts $f "and this"
@@ -3615,15 +5154,15 @@ test io-17.10 {POSIX open access modes: RDONLY} {
 	[list {two lines: this one} 1 \
 		[format "channel \"%s\" wasn't opened for writing" $f]]
 } 0
-test io-17.11 {POSIX open access modes: RDONLY} {
+test io-40.11 {POSIX open access modes: RDONLY} {
     removeFile test3
     string tolower [list [catch {open test3 RDONLY} msg] $msg]
 } {1 {couldn't open "test3": no such file or directory}}
-test io-17.12 {POSIX open access modes: WRONLY} {
+test io-40.12 {POSIX open access modes: WRONLY} {
     removeFile test3
     string tolower [list [catch {open test3 WRONLY} msg] $msg]
 } {1 {couldn't open "test3": no such file or directory}}
-test io-17.13 {POSIX open access modes: WRONLY} {
+test io-40.13 {POSIX open access modes: WRONLY} {
     makeFile xyzzy test3
     set f [open test3 WRONLY]
     fconfigure $f -eofchar {}
@@ -3635,11 +5174,11 @@ test io-17.13 {POSIX open access modes: WRONLY} {
     string compare [string tolower $x] \
 	[list 1 "channel \"$f\" wasn't opened for reading" abzzy]
 } 0
-test io-17.14 {POSIX open access modes: RDWR} {
+test io-40.14 {POSIX open access modes: RDWR} {
     removeFile test3
     string tolower [list [catch {open test3 RDWR} msg] $msg]
 } {1 {couldn't open "test3": no such file or directory}}
-test io-17.15 {POSIX open access modes: RDWR} {
+test io-40.15 {POSIX open access modes: RDWR} {
     makeFile xyzzy test3
     set f [open test3 RDWR]
     puts -nonewline $f "ab"
@@ -3649,7 +5188,7 @@ test io-17.15 {POSIX open access modes: RDWR} {
     lappend x [viewFile test3]
 } {zzy abzzy}
 if {![file exists ~/_test_] && [file writable ~]} {
-    test io-17.16 {tilde substitution in open} {
+    test io-40.16 {tilde substitution in open} {
 	set f [open ~/_test_ w]
 	puts $f "Some text"
 	close $f
@@ -3658,7 +5197,7 @@ if {![file exists ~/_test_] && [file writable ~]} {
 	set x
     } 1
 }
-test io-17.17 {tilde substitution in open} {
+test io-40.17 {tilde substitution in open} {
     set home $env(HOME)
     unset env(HOME)
     set x [list [catch {open ~/foo} msg] $msg]
@@ -3666,19 +5205,19 @@ test io-17.17 {tilde substitution in open} {
     set x
 } {1 {couldn't find HOME environment variable to expand path}}
 
-test io-18.1 {Tcl_FileeventCmd: errors} {
+test io-41.1 {Tcl_FileeventCmd: errors} {
     list [catch {fileevent foo} msg] $msg
-} {1 {wrong # args: must be "fileevent channelId event ?script?}}
-test io-18.2 {Tcl_FileeventCmd: errors} {
+} {1 {wrong # args: should be "fileevent channelId event ?script?"}}
+test io-41.2 {Tcl_FileeventCmd: errors} {
     list [catch {fileevent foo bar baz q} msg] $msg
-} {1 {wrong # args: must be "fileevent channelId event ?script?}}
-test io-18.3 {Tcl_FileeventCmd: errors} {
+} {1 {wrong # args: should be "fileevent channelId event ?script?"}}
+test io-41.3 {Tcl_FileeventCmd: errors} {
     list [catch {fileevent gorp readable} msg] $msg
 } {1 {can not find channel named "gorp"}}
-test io-18.4 {Tcl_FileeventCmd: errors} {
+test io-41.4 {Tcl_FileeventCmd: errors} {
     list [catch {fileevent gorp writable} msg] $msg
 } {1 {can not find channel named "gorp"}}
-test io-18.5 {Tcl_FileeventCmd: errors} {
+test io-41.5 {Tcl_FileeventCmd: errors} {
     list [catch {fileevent gorp who-knows} msg] $msg
 } {1 {bad event name "who-knows": must be readable or writable}}
 
@@ -3688,10 +5227,10 @@ test io-18.5 {Tcl_FileeventCmd: errors} {
 
 set f [open foo w+]
 
-test io-19.1 {Tcl_FileeventCmd: creating, deleting, querying} {
+test io-42.1 {Tcl_FileeventCmd: creating, deleting, querying} {
     list [fileevent $f readable] [fileevent $f writable]
 } {{} {}}
-test io-19.2 {Tcl_FileeventCmd: replacing} {
+test io-42.2 {Tcl_FileeventCmd: replacing} {
     set result {}
     fileevent $f r "first script"
     lappend result [fileevent $f readable]
@@ -3702,18 +5241,27 @@ test io-19.2 {Tcl_FileeventCmd: replacing} {
     fileevent $f r ""
     lappend result [fileevent $f readable]
 } {{first script} {new script} {yet another} {}}
-
+test io-42.3 {Tcl_FileeventCmd: replacing, with NULL chars in script} {
+    set result {}
+    fileevent $f r "first scr\0ipt"
+    lappend result [string length [fileevent $f readable]]
+    fileevent $f r "new scr\0ipt"
+    lappend result [string length [fileevent $f readable]]
+    fileevent $f r "yet ano\0ther"
+    lappend result [string length [fileevent $f readable]]
+    fileevent $f r ""
+    lappend result [fileevent $f readable]
+} {13 11 12 {}}
 #
 # Test fileevent on a pipe
 #
 
-if {($tcl_platform(platform) != "macintosh") && \
-	($testConfig(unixExecs) == 1)} {
+if {$testConfig(stdio) && $testConfig(unixExecs)} {
 
 catch {set f2 [open "|[list cat -u]" r+]}
 catch {set f3 [open "|[list cat -u]" r+]}
 
-test io-20.1 {Tcl_FileeventCmd: creating, deleting, querying} {
+test io-43.1 {Tcl_FileeventCmd: creating, deleting, querying} {
     set result {}
     fileevent $f readable "script 1"
     lappend result [fileevent $f readable] [fileevent $f writable]
@@ -3724,7 +5272,7 @@ test io-20.1 {Tcl_FileeventCmd: creating, deleting, querying} {
     fileevent $f writable {}
     lappend result [fileevent $f readable] [fileevent $f writable]
 } {{script 1} {} {script 1} {write script} {} {write script} {} {}}
-test io-20.2 {Tcl_FileeventCmd: deleting when many present} {
+test io-43.2 {Tcl_FileeventCmd: deleting when many present} {
     set result {}
     lappend result [fileevent $f r] [fileevent $f2 r] [fileevent $f3 r]
     fileevent $f r "read f"
@@ -3739,7 +5287,7 @@ test io-20.2 {Tcl_FileeventCmd: deleting when many present} {
     lappend result [fileevent $f r] [fileevent $f2 r] [fileevent $f3 r]
 } {{} {} {} {read f} {read f2} {read f3} {read f} {} {read f3} {read f} {} {} {} {} {}}
 
-test io-21.1 {FileEventProc procedure: normal read event} {
+test io-44.1 {FileEventProc procedure: normal read event} {
     fileevent $f2 readable {
 	set x [gets $f2]; fileevent $f2 readable {}
     }
@@ -3748,7 +5296,7 @@ test io-21.1 {FileEventProc procedure: normal read event} {
     vwait x
     set x
 } {text}
-test io-21.2 {FileEventProc procedure: error in read event} {
+test io-44.2 {FileEventProc procedure: error in read event} {
     proc bgerror args {
 	global x
 	set x $args
@@ -3760,7 +5308,7 @@ test io-21.2 {FileEventProc procedure: error in read event} {
     rename bgerror {}
     list $x [fileevent $f2 readable]
 } {bogus {}}
-test io-21.3 {FileEventProc procedure: normal write event} {
+test io-44.3 {FileEventProc procedure: normal write event} {
     fileevent $f2 writable {
 	lappend x "triggered"
 	incr count -1
@@ -3775,7 +5323,7 @@ test io-21.3 {FileEventProc procedure: normal write event} {
     vwait x
     set x
 } {initial triggered triggered triggered}
-test io-21.4 {FileEventProc procedure: eror in write event} {
+test io-44.4 {FileEventProc procedure: eror in write event} {
     proc bgerror args {
 	global x
 	set x $args
@@ -3786,7 +5334,7 @@ test io-21.4 {FileEventProc procedure: eror in write event} {
     rename bgerror {}
     list $x [fileevent $f2 writable]
 } {bad-write {}}
-test io-21.5 {FileEventProc procedure: end of file} {unixOrPc} {
+test io-44.5 {FileEventProc procedure: end of file} {
     set f4 [open "|[list $tcltest cat << foo]" r]
     fileevent $f4 readable {
 	if {[gets $f4 line] < 0} {
@@ -3812,7 +5360,7 @@ catch {close $f3}
 
 close $f
 makeFile "foo bar" foo
-test io-22.1 {DeleteFileEvent, cleanup on close} {
+test io-45.1 {DeleteFileEvent, cleanup on close} {
     set f [open foo r]
     fileevent $f readable {
 	lappend x "binding triggered: \"[gets $f]\""
@@ -3824,7 +5372,7 @@ test io-22.1 {DeleteFileEvent, cleanup on close} {
     vwait y
     set x
 } {initial}
-test io-22.2 {DeleteFileEvent, cleanup on close} {
+test io-45.2 {DeleteFileEvent, cleanup on close} {
     set f [open foo r]
     set f2 [open foo r]
     fileevent $f readable {
@@ -3841,7 +5389,7 @@ test io-22.2 {DeleteFileEvent, cleanup on close} {
     close $f2
     set x
 } {initial {f2 triggered: "foo bar"}}
-test io-22.3 {DeleteFileEvent, cleanup on close} {
+test io-45.3 {DeleteFileEvent, cleanup on close} {
     set f [open foo r]
     set f2 [open foo r]
     set f3 [open foo r]
@@ -3867,7 +5415,7 @@ test io-22.3 {DeleteFileEvent, cleanup on close} {
 
 if {[info commands testfevent] == "testfevent"} {
 
-test io-23.1 {Tcl event loop vs multiple interpreters} {
+test io-46.1 {Tcl event loop vs multiple interpreters} {
     testfevent create
     testfevent cmd {
         set f [open foo r]
@@ -3882,7 +5430,7 @@ test io-23.1 {Tcl event loop vs multiple interpreters} {
     testfevent cmd {close $f}
     list [testfevent cmd {set x}] [testfevent cmd {info commands after}]
 } {{f triggered: foo bar} after}
-test io-23.2 {Tcl event loop vs multiple interpreters} {
+test io-46.2 {Tcl event loop vs multiple interpreters} {
     testfevent create
     testfevent cmd {
         set x 0
@@ -3891,7 +5439,7 @@ test io-23.2 {Tcl event loop vs multiple interpreters} {
         set x
     }
 } {triggered}
-test io-23.3 {Tcl event loop vs multiple interpreters} {
+test io-46.3 {Tcl event loop vs multiple interpreters} {
     testfevent create
     testfevent cmd {
         set x 0
@@ -3905,7 +5453,7 @@ test io-23.3 {Tcl event loop vs multiple interpreters} {
     }
 } {0 0 {0 timer}}
 
-test io-24.1 {fileevent vs multiple interpreters} {
+test io-47.1 {fileevent vs multiple interpreters} {
     set f [open foo r]
     set f2 [open foo r]
     set f3 [open foo r]
@@ -3924,7 +5472,7 @@ test io-24.1 {fileevent vs multiple interpreters} {
     close $f3
     set x
 } {{} {script 1} {} {sript 3}}
-test io-24.2 {deleting fileevent on interpreter delete} {
+test io-47.2 {deleting fileevent on interpreter delete} {
     set f [open foo r]
     set f2 [open foo r]
     set f3 [open foo r]
@@ -3945,7 +5493,7 @@ test io-24.2 {deleting fileevent on interpreter delete} {
     close $f4
     set x
 } {{script 1} {} {} {script 4}}
-test io-24.3 {deleting fileevent on interpreter delete} {
+test io-47.3 {deleting fileevent on interpreter delete} {
     set f [open foo r]
     set f2 [open foo r]
     set f3 [open foo r]
@@ -3966,7 +5514,7 @@ test io-24.3 {deleting fileevent on interpreter delete} {
     close $f4
     set x
 } {{script 1} {script 2} {} {}}
-test io-24.4 {file events on shared files and multiple interpreters} {
+test io-47.4 {file events on shared files and multiple interpreters} {
     set f [open foo r]
     set f2 [open foo r]
     testfevent create
@@ -3982,7 +5530,7 @@ test io-24.4 {file events on shared files and multiple interpreters} {
     close $f2
     set x
 } {{script 3} {script 1} {script 2}}
-test io-24.5 {file events on shared files, deleting file events} {
+test io-47.5 {file events on shared files, deleting file events} {
     set f [open foo r]
     testfevent create
     testfevent share $f
@@ -3995,7 +5543,7 @@ test io-24.5 {file events on shared files, deleting file events} {
     close $f
     set x
 } {{} {script 2}}
-test io-24.6 {file events on shared files, deleting file events} {
+test io-47.6 {file events on shared files, deleting file events} {
     set f [open foo r]
     testfevent create
     testfevent share $f
@@ -4013,7 +5561,7 @@ test io-24.6 {file events on shared files, deleting file events} {
 
 # The above curly closes the test for presence of the "testfevent" command.
 
-test io-25.1 {testing readability conditions} {
+test io-48.1 {testing readability conditions} {
     set f [open bar w]
     puts $f abcdefg
     puts $f abcdefg
@@ -4038,7 +5586,7 @@ test io-25.1 {testing readability conditions} {
     vwait x
     list $x $l
 } {done {called called called called called called called}}
-test io-25.2 {testing readability conditions} {nonBlockFiles} {
+test io-48.2 {testing readability conditions} {nonBlockFiles} {
     set f [open bar w]
     puts $f abcdefg
     puts $f abcdefg
@@ -4064,7 +5612,7 @@ test io-25.2 {testing readability conditions} {nonBlockFiles} {
     vwait x
     list $x $l
 } {done {called called called called called called called}}
-test io-25.3 {testing readability conditions} {unixOnly nonBlockFiles} {
+test io-48.3 {testing readability conditions} {unixOnly nonBlockFiles} {
     set f [open bar w]
     puts $f abcdefg
     puts $f abcdefg
@@ -4108,7 +5656,7 @@ test io-25.3 {testing readability conditions} {unixOnly nonBlockFiles} {
     close $f
     list $x $l
 } {done {0 1 0 1 0 1 0 1 0 1 0 1 0 0}}
-test io-25.4 {lf write, testing readability, ^Z termination, auto read mode} {
+test io-48.4 {lf write, testing readability, ^Z termination, auto read mode} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation lf
@@ -4133,7 +5681,7 @@ test io-25.4 {lf write, testing readability, ^Z termination, auto read mode} {
     vwait x
     list $c $l
 } {3 {abc def {}}}
-test io-25.5 {lf write, testing readability, ^Z in middle, auto read mode} {
+test io-48.5 {lf write, testing readability, ^Z in middle, auto read mode} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation lf
@@ -4158,7 +5706,7 @@ test io-25.5 {lf write, testing readability, ^Z in middle, auto read mode} {
     vwait x
     list $c $l
 } {3 {abc def {}}}
-test io-25.6 {cr write, testing readability, ^Z termination, auto read mode} {
+test io-48.6 {cr write, testing readability, ^Z termination, auto read mode} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation cr
@@ -4183,7 +5731,7 @@ test io-25.6 {cr write, testing readability, ^Z termination, auto read mode} {
     vwait x
     list $c $l
 } {3 {abc def {}}}
-test io-25.7 {cr write, testing readability, ^Z in middle, auto read mode} {
+test io-48.7 {cr write, testing readability, ^Z in middle, auto read mode} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation cr
@@ -4208,7 +5756,7 @@ test io-25.7 {cr write, testing readability, ^Z in middle, auto read mode} {
     vwait x
     list $c $l
 } {3 {abc def {}}}
-test io-25.8 {crlf write, testing readability, ^Z termination, auto read mode} {
+test io-48.8 {crlf write, testing readability, ^Z termination, auto read mode} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation crlf
@@ -4233,7 +5781,7 @@ test io-25.8 {crlf write, testing readability, ^Z termination, auto read mode} {
     vwait x
     list $c $l
 } {3 {abc def {}}}
-test io-25.9 {crlf write, testing readability, ^Z in middle, auto read mode} {
+test io-48.9 {crlf write, testing readability, ^Z in middle, auto read mode} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation crlf
@@ -4258,7 +5806,7 @@ test io-25.9 {crlf write, testing readability, ^Z in middle, auto read mode} {
     vwait x
     list $c $l
 } {3 {abc def {}}}
-test io-25.10 {lf write, testing readability, ^Z in middle, lf read mode} {
+test io-48.10 {lf write, testing readability, ^Z in middle, lf read mode} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation lf
@@ -4283,7 +5831,7 @@ test io-25.10 {lf write, testing readability, ^Z in middle, lf read mode} {
     vwait x
     list $c $l
 } {3 {abc def {}}}
-test io-25.11 {lf write, testing readability, ^Z termination, lf read mode} {
+test io-48.11 {lf write, testing readability, ^Z termination, lf read mode} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation lf
@@ -4308,7 +5856,7 @@ test io-25.11 {lf write, testing readability, ^Z termination, lf read mode} {
     vwait x
     list $c $l
 } {3 {abc def {}}}
-test io-25.12 {cr write, testing readability, ^Z in middle, cr read mode} {
+test io-48.12 {cr write, testing readability, ^Z in middle, cr read mode} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation cr
@@ -4333,7 +5881,7 @@ test io-25.12 {cr write, testing readability, ^Z in middle, cr read mode} {
     vwait x
     list $c $l
 } {3 {abc def {}}}
-test io-25.13 {cr write, testing readability, ^Z termination, cr read mode} {
+test io-48.13 {cr write, testing readability, ^Z termination, cr read mode} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation cr
@@ -4358,7 +5906,7 @@ test io-25.13 {cr write, testing readability, ^Z termination, cr read mode} {
     vwait x
     list $c $l
 } {3 {abc def {}}}
-test io-25.14 {crlf write, testing readability, ^Z in middle, crlf read mode} {
+test io-48.14 {crlf write, testing readability, ^Z in middle, crlf read mode} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation crlf
@@ -4383,7 +5931,7 @@ test io-25.14 {crlf write, testing readability, ^Z in middle, crlf read mode} {
     vwait x
     list $c $l
 } {3 {abc def {}}}
-test io-25.15 {crlf write, testing readability, ^Z termi, crlf read mode} {
+test io-48.15 {crlf write, testing readability, ^Z termi, crlf read mode} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation crlf
@@ -4409,7 +5957,7 @@ test io-25.15 {crlf write, testing readability, ^Z termi, crlf read mode} {
     list $c $l
 } {3 {abc def {}}}
 
-test io-26.1 {testing crlf reading, leftover cr disgorgment} {
+test io-49.1 {testing crlf reading, leftover cr disgorgment} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation lf
@@ -4438,7 +5986,7 @@ test io-26.1 {testing crlf reading, leftover cr disgorgment} {
     set l
 } "7 a 1 [list \r] 2 b 3 [list \r] 4 c 5 {
 } 7 0 {} 1"
-test io-26.2 {testing crlf reading, leftover cr disgorgment} {
+test io-49.2 {testing crlf reading, leftover cr disgorgment} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation lf
@@ -4461,7 +6009,7 @@ test io-26.2 {testing crlf reading, leftover cr disgorgment} {
     close $f
     set l
 } "7 [list a\r] 2 [list b\r] 4 [list c\n] 7 0 {} 7 1"
-test io-26.3 {testing crlf reading, leftover cr disgorgment} {
+test io-49.3 {testing crlf reading, leftover cr disgorgment} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation lf
@@ -4482,7 +6030,7 @@ test io-26.3 {testing crlf reading, leftover cr disgorgment} {
     close $f
     set l
 } "7 [list a\rb] 3 [list \rc\n] 7 0 {} 7 1"
-test io-26.4 {testing crlf reading, leftover cr disgorgment} {
+test io-49.4 {testing crlf reading, leftover cr disgorgment} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation lf
@@ -4503,7 +6051,7 @@ test io-26.4 {testing crlf reading, leftover cr disgorgment} {
     close $f
     set l
 } "7 [list a\rb] 3 [list \rc] 7 0 {} 7 1"
-test io-26.5 {testing crlf reading, leftover cr disgorgment} {
+test io-49.5 {testing crlf reading, leftover cr disgorgment} {
     removeFile test1
     set f [open test1 w]
     fconfigure $f -translation lf
@@ -4522,7 +6070,7 @@ test io-26.5 {testing crlf reading, leftover cr disgorgment} {
     set l
 } [list 7 a\rb\rc 7 {} 7 1]
     
-test io-27.1 {testing handler deletion} {
+test io-50.1 {testing handler deletion} {
     removeFile test1
     set f [open test1 w]
     close $f
@@ -4538,7 +6086,7 @@ test io-27.1 {testing handler deletion} {
     close $f
     set z
 } called
-test io-27.2 {testing handler deletion with multiple handlers} {
+test io-50.2 {testing handler deletion with multiple handlers} {
     removeFile test1
     set f [open test1 w]
     close $f
@@ -4556,7 +6104,7 @@ test io-27.2 {testing handler deletion with multiple handlers} {
     string compare [string tolower $z] \
 	[list [list called delhandler $f 0] [list called delhandler $f 1]]
 } 0
-test io-27.3 {testing handler deletion with multiple handlers} {
+test io-50.3 {testing handler deletion with multiple handlers} {
     removeFile test1
     set f [open test1 w]
     close $f
@@ -4582,7 +6130,7 @@ test io-27.3 {testing handler deletion with multiple handlers} {
 	[list [list delhandler $f 0 called] \
 	      [list delhandler $f 0 deleted myself]]
 } 0
-test io-27.4 {testing handler deletion vs reentrant calls} {
+test io-50.4 {testing handler deletion vs reentrant calls} {
     removeFile test1
     set f [open test1 w]
     close $f
@@ -4606,7 +6154,7 @@ test io-27.4 {testing handler deletion vs reentrant calls} {
     string compare [string tolower $z] \
 	{{delrecursive calling recursive} {delrecursive deleting recursive}}
 } 0
-test io-27.5 {testing handler deletion vs reentrant calls} {
+test io-50.5 {testing handler deletion vs reentrant calls} {
     removeFile test1
     set f [open test1 w]
     close $f
@@ -4639,7 +6187,7 @@ test io-27.5 {testing handler deletion vs reentrant calls} {
 	[list {del calling recursive} {del deleted notcalled} \
 	      {del deleted myself} {del after update}]
 } 0
-test io-27.6 {testing handler deletion vs reentrant calls} {
+test io-50.6 {testing handler deletion vs reentrant calls} {
     removeFile test1
     set f [open test1 w]
     close $f
@@ -4681,7 +6229,7 @@ test io-27.6 {testing handler deletion vs reentrant calls} {
 	      {first after update}]
 } 0
 
-test io-28.1 {Test old socket deletion on Macintosh} {socket} {
+test io-51.1 {Test old socket deletion on Macintosh} {socket} {
     set x 0
     set result ""
     proc accept {s a p} {
@@ -4719,7 +6267,7 @@ test io-28.1 {Test old socket deletion on Macintosh} {socket} {
     set result
 } {sock1 sock2 sock3 sock4}
 
-test io-29.1 {TclCopyChannel} {
+test io-52.1 {TclCopyChannel} {
     removeFile test1
     set f1 [open [info script]]
     set f2 [open test1 w]
@@ -4729,7 +6277,7 @@ test io-29.1 {TclCopyChannel} {
     close $f2
     string compare $msg "channel \"$f1\" is busy"
 } {0}
-test io-29.2 {TclCopyChannel} {
+test io-52.2 {TclCopyChannel} {
     removeFile test1
     set f1 [open [info script]]
     set f2 [open test1 w]
@@ -4741,7 +6289,7 @@ test io-29.2 {TclCopyChannel} {
     close $f3
     string compare $msg "channel \"$f2\" is busy"
 } {0}
-test io-29.3 {TclCopyChannel} {
+test io-52.3 {TclCopyChannel} {
     removeFile test1
     set f1 [open [info script]]
     set f2 [open test1 w]
@@ -4758,7 +6306,7 @@ test io-29.3 {TclCopyChannel} {
     }
     set result
 } {0 0 ok}
-test io-29.4 {TclCopyChannel} {
+test io-52.4 {TclCopyChannel} {
     removeFile test1
     set f1 [open [info script]]
     set f2 [open test1 w]
@@ -4770,7 +6318,7 @@ test io-29.4 {TclCopyChannel} {
     close $f2
     lappend result [file size test1]
 } {0 0 40}
-test io-29.5 {TclCopyChannel} {
+test io-52.5 {TclCopyChannel} {
     removeFile test1
     set f1 [open [info script]]
     set f2 [open test1 w]
@@ -4787,7 +6335,7 @@ test io-29.5 {TclCopyChannel} {
     }
     set result
 } {0 0 ok}
-test io-29.6 {TclCopyChannel} {
+test io-52.6 {TclCopyChannel} {
     removeFile test1
     set f1 [open [info script]]
     set f2 [open test1 w]
@@ -4804,7 +6352,7 @@ test io-29.6 {TclCopyChannel} {
     }
     set result
 } {0 0 ok}
-test io-29.7 {TclCopyChannel} {
+test io-52.7 {TclCopyChannel} {
     removeFile test1
     set f1 [open [info script]]
     set f2 [open test1 w]
@@ -4821,7 +6369,7 @@ test io-29.7 {TclCopyChannel} {
     }
     set result
 } {0 0 ok}
-test io-29.8 {TclCopyChannel} {stdio} {
+test io-52.8 {TclCopyChannel} {stdio} {
     removeFile test1
     removeFile pipe
     set f1 [open pipe w]
@@ -4848,7 +6396,7 @@ test io-29.8 {TclCopyChannel} {stdio} {
     list $s0 [file size test1]
 } {40 40}
 
-test io-30.1 {CopyData} {
+test io-53.1 {CopyData} {
     removeFile test1
     set f1 [open [info script]]
     set f2 [open test1 w]
@@ -4860,7 +6408,7 @@ test io-30.1 {CopyData} {
     close $f2
     lappend result [file size test1]
 } {0 0 0}
-test io-30.2 {CopyData} {
+test io-53.2 {CopyData} {
     removeFile test1
     set f1 [open [info script]]
     set f2 [open test1 w]
@@ -4878,7 +6426,7 @@ test io-30.2 {CopyData} {
     }
     set result
 } {0 0 ok}
-test io-30.3 {CopyData: background read underflow} {unixOnly} {
+test io-53.3 {CopyData: background read underflow} {unixOnly} {
     removeFile test1
     removeFile pipe
     set f1 [open pipe w]
@@ -4908,8 +6456,8 @@ test io-30.3 {CopyData: background read underflow} {unixOnly} {
     close $f
     set result
 } "ready line1 line2 {done\n}"
-test io-30.4 {CopyData: background write overflow} {unixOnly} {
-    set big aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa\n
+test io-53.4 {CopyData: background write overflow} {unixOnly} {
+    set big bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb\n
     for {set x 0} {$x < 12} {incr x} {
 	append big $big
     }
@@ -4944,6 +6492,7 @@ test io-30.4 {CopyData: background write overflow} {unixOnly} {
     set big {}
     set x
 } done
+set result {}
 
 proc FcopyTestAccept {sock args} {
     after 1000 "close $sock"
@@ -4956,24 +6505,22 @@ proc FcopyTestDone {bytes {error {}}} {
 	set fcopyTestDone 0
     }
 }
-if [catch {socket -server FcopyTestAccept 2828} listen] {
-    puts stderr "Skipping fcopy error test"
-} else {
-    test io-30.5 {CopyData: error during fcopy} {
-	set in [open [info script]]	;# 126 K
-	set out [socket localhost 2828]
-	catch {unset fcopyTestDone}
-	close $listen	;# This means the socket open never really succeeds
-	fcopy $in $out -command FcopyTestDone
-	if ![info exists fcopyTestDone] {
-	    vwait fcopyTestDone		;# The error occurs here in the b.g.
-	}
-	close $in
-	close $out
-	set fcopyTestDone	;# 1 for error condition
-    } 1
-}
-test io-30.6 {CopyData: error during fcopy} {stdio} {
+
+test io-53.5 {CopyData: error during fcopy} {socket} {
+    set listen [socket -server FcopyTestAccept 2828]
+    set in [open [info script]]	;# 126 K
+    set out [socket localhost 2828]
+    catch {unset fcopyTestDone}
+    close $listen	;# This means the socket open never really succeeds
+    fcopy $in $out -command FcopyTestDone
+    if ![info exists fcopyTestDone] {
+	vwait fcopyTestDone		;# The error occurs here in the b.g.
+    }
+    close $in
+    close $out
+    set fcopyTestDone	;# 1 for error condition
+} 1
+test io-53.6 {CopyData: error during fcopy} {stdio} {
     removeFile pipe
     removeFile test1
     catch {unset fcopyTestDone}
@@ -4991,7 +6538,7 @@ test io-30.6 {CopyData: error during fcopy} {stdio} {
     set fcopyTestDone	;# 0 for plain end of file
 } {0}
 
-test io-31.1 {Recursive channel events} {socket} {
+test io-54.1 {Recursive channel events} {socket} {
     # This test checks to see if file events are delivered during recursive
     # event loops when there is buffered data on the channel.
 
@@ -5043,31 +6590,35 @@ test io-31.1 {Recursive channel events} {socket} {
     close $cs
     list $result $x
 } {{{line 1} 1 2} 2}
-test io-31.2 {Testing for busy-wait in recursive channel events} {socket} {
+test io-54.2 {Testing for busy-wait in recursive channel events} {socket} {
+    set accept {}
+    set after {}
     set s [socket -server accept 3939]
     proc accept {s a p} {
-	global counter
+	global counter accept
 
+	set accept $s
 	set counter 0
 	fconfigure $s -blocking off -buffering line -translation lf
 	fileevent $s readable "doit $s"
     }
     proc doit {s} {
-	global counter
+	global counter after
 
 	incr counter
 	set l [gets $s]
 	if {"$l" == ""} {
 	    fileevent $s readable "doit1 $s"
-	    after 1000 newline
+	    set after [after 1000 newline]
 	}
     }
     proc doit1 {s} {
-	global counter
+	global counter accept
 
 	incr counter
 	set l [gets $s]
 	close $s
+	set accept {}
     }
     proc producer {} {
 	global writer
@@ -5088,9 +6639,12 @@ test io-31.2 {Testing for busy-wait in recursive channel events} {socket} {
     vwait done
     close $writer
     close $s
+    after cancel $after
+    if {$accept != {}} {close $accept}
     set counter
 } 1
-test io-32.1 {ChannelEventScriptInvoker: deletion} {
+
+test io-55.1 {ChannelEventScriptInvoker: deletion} {
     proc eventScript {fd} {
 	close $fd
 	error "planned error"
@@ -5106,7 +6660,7 @@ test io-32.1 {ChannelEventScriptInvoker: deletion} {
     set x
 } {got_error}
 
-test io-33.1 {ChannelTimerProc} {
+test io-56.1 {ChannelTimerProc} {
     set f [open fooBar w]
     puts $f "this is a test"
     close $f
@@ -5122,6 +6676,7 @@ test io-33.1 {ChannelTimerProc} {
     testchannelevent $f set 0 none
     after idle {set y done}
     vwait y
+    close $f
     lappend result $y
 } {2 done}
 
@@ -5139,5 +6694,5 @@ removeFile test3
 
 file delete cat
 
-set x ""
-unset x
+restoreState
+return