Created branch scriptics-tclpro-1-2-syntheticscriptics_tclpro_1_2scriptics_tclpro_1_2_synthetic

1 files changed, 0 insertions, 1593 deletions

diff --git a/tests/socket.test b/tests/socket.test
deleted file mode 100644
index 5ff563a..0000000
--- a/tests/socket.test
+++ /dev/null
@@ -1,1593 +0,0 @@
-# Commands tested in this file: socket.
-#
-# This file contains a collection of tests for one or more of the Tcl
-# built-in commands.  Sourcing this file into Tcl runs the tests and
-# generates output for errors.  No output means no errors were found.
-#
-# Copyright (c) 1994-1996 Sun Microsystems, Inc.
-#
-# See the file "license.terms" for information on usage and redistribution
-# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
-#
-# Running socket tests with a remote server:
-# ------------------------------------------
-# 
-# Some tests in socket.test depend on the existence of a remote server to
-# which they connect. The remote server must be an instance of tcltest and it
-# must run the script found in the file "remote.tcl" in this directory. You
-# can start the remote server on any machine reachable from the machine on
-# which you want to run the socket tests, by issuing:
-# 
-#     tcltest remote.tcl -port 2048	# Or choose another port number.
-# 
-# If the machine you are running the remote server on has several IP
-# interfaces, you can choose which interface the server listens on for
-# connections by specifying the -address command line flag, so:
-# 
-#     tcltest remote.tcl -address your.machine.com
-# 
-# These options can also be set by environment variables. On Unix, you can
-# type these commands to the shell from which the remote server is started:
-# 
-#     shell% setenv serverPort 2048
-#     shell% setenv serverAddress your.machine.com
-# 
-# and subsequently you can start the remote server with:
-# 
-#     tcltest remote.tcl
-# 
-# to have it listen on port 2048 on the interface your.machine.com.
-#     
-# When the server starts, it prints out a detailed message containing its
-# configuration information, and it will block until killed with a Ctrl-C.
-# Once the remote server exists, you can run the tests in socket.test with
-# the server by setting two Tcl variables:
-# 
-#     % set remoteServerIP <name or address of machine on which server runs>
-#     % set remoteServerPort 2048
-# 
-# These variables are also settable from the environment. On Unix, you can:
-# 
-#     shell% setenv remoteServerIP machine.where.server.runs
-#     shell% senetv remoteServerPort 2048
-# 
-# The preamble of the socket.test file checks to see if the variables are set
-# either in Tcl or in the environment; if they are, it attempts to connect to
-# the server. If the connection is successful, the tests using the remote
-# server will be performed; otherwise, it will attempt to start the remote
-# server (via exec) on platforms that support this, on the local host,
-# listening at port 2048. If all fails, a message is printed and the tests
-# using the remote server are not performed.
-#
-# RCS: @(#) $Id: socket.test,v 1.6 1998/12/04 01:01:55 stanton Exp $
-
-if {[string compare test [info procs test]] == 1} then {source defs}
-
-if {$testConfig(socket) == 0} {
-    return
-}
-
-#
-# If remoteServerIP or remoteServerPort are not set, check in the
-# environment variables for externally set values.
-#
-
-if {![info exists remoteServerIP]} {
-    if {[info exists env(remoteServerIP)]} {
-	set remoteServerIP $env(remoteServerIP)
-    }
-}
-if {![info exists remoteServerPort]} {
-    if {[info exists env(remoteServerIP)]} {
-	set remoteServerPort $env(remoteServerPort)
-    } else {
-        if {[info exists remoteServerIP]} {
-	    set remoteServerPort 2048
-        }
-    }
-}
-
-#
-# Check if we're supposed to do tests against the remote server
-#
-
-set doTestsWithRemoteServer 1
-if {![info exists remoteServerIP] && ($tcl_platform(platform) != "macintosh")} {
-    set remoteServerIP localhost
-}
-if {($doTestsWithRemoteServer == 1) && (![info exists remoteServerPort])} {
-    set remoteServerPort 2048
-}
-
-# Attempt to connect to a remote server if one is already running. If it
-# is not running or for some other reason the connect fails, attempt to
-# start the remote server on the local host listening on port 2048. This
-# is only done on platforms that support exec (i.e. not on the Mac). On
-# platforms that do not support exec, the remote server must be started
-# by the user before running the tests.
-
-set remoteProcChan ""
-set commandSocket ""
-if {$doTestsWithRemoteServer} {
-    catch {close $commandSocket}
-    if {[catch {set commandSocket [socket $remoteServerIP \
-						$remoteServerPort]}] != 0} {
-	if {[info commands exec] == ""} {
-	    set noRemoteTestReason "can't exec"
-	    set doTestsWithRemoteServer 0
-	} elseif {$testConfig(win32s)} {
-	    set noRemoteTestReason "\ncan't run multiple instances of tcltest under win32s."
-	    set doTestsWithRemoteServer 0
-	} else {
-	    set remoteServerIP localhost
-	    if {[catch {set remoteProcChan \
-				[open "|[list $tcltest remote.tcl \
-					-serverIsSilent \
-					-port $remoteServerPort \
-					-address $remoteServerIP]" \
-					w+]} \
-		   msg] == 0} {
-		after 1000
-		if {[catch {set commandSocket [socket $remoteServerIP \
-				$remoteServerPort]} msg] == 0} {
-		    fconfigure $commandSocket -translation crlf -buffering line
-		} else {
-		    set noRemoteTestReason $msg
-		    set doTestsWithRemoteServer 0
-		}
-	    } else {
-		set noRemoteTestReason "$msg $tcltest"
-		set doTestsWithRemoteServer 0
-	    }
-	}
-    } else {
-	fconfigure $commandSocket -translation crlf -buffering line
-    }
-}
-
-if {$doTestsWithRemoteServer == 0} {
-    puts "Skipping tests with remote server. See tests/socket.test for"
-    puts "information on how to run remote server."
-    if {[info exists VERBOSE] && ($VERBOSE != 0)} {
-	puts "Reason for not doing remote tests: $noRemoteTestReason"
-    }
-}
-
-#
-# If we do the tests, define a command to send a command to the
-# remote server.
-#
-
-if {$doTestsWithRemoteServer == 1} {
-    proc sendCommand {c} {
-	global commandSocket
-
-	if {[eof $commandSocket]} {
-	    error "remote server disappeared"
-	}
-
-	if {[catch {puts $commandSocket $c} msg]} {
-	    error "remote server disappaered: $msg"
-	}
-	if {[catch {puts $commandSocket "--Marker--Marker--Marker--"} msg]} {
-	    error "remote server disappeared: $msg"
-	}
-
-	set resp ""
-	while {1} {
-	    set line [gets $commandSocket]
-	    if {[eof $commandSocket]} {
-		error "remote server disappaered"
-	    }
-	    if {[string compare $line "--Marker--Marker--Marker--"] == 0} {
-		if {[string compare [lindex $resp 0] error] == 0} {
-		    error [lindex $resp 1]
-		} else {
-		    return [lindex $resp 1]
-		}
-	    } else {
-		append resp $line "\n"
-	    }
-	}
-    }
-}
-
-test socket-1.1 {arg parsing for socket command} {
-    list [catch {socket -server} msg] $msg
-} {1 {no argument given for -server option}}
-test socket-1.2 {arg parsing for socket command} {
-    list [catch {socket -server foo} msg] $msg
-} {1 {wrong # args: should be either:
-socket ?-myaddr addr? ?-myport myport? ?-async? host port
-socket -server command ?-myaddr addr? port}}
-test socket-1.3 {arg parsing for socket command} {
-    list [catch {socket -myaddr} msg] $msg
-} {1 {no argument given for -myaddr option}}
-test socket-1.4 {arg parsing for socket command} {
-    list [catch {socket -myaddr 127.0.0.1} msg] $msg
-} {1 {wrong # args: should be either:
-socket ?-myaddr addr? ?-myport myport? ?-async? host port
-socket -server command ?-myaddr addr? port}}
-test socket-1.5 {arg parsing for socket command} {
-    list [catch {socket -myport} msg] $msg
-} {1 {no argument given for -myport option}}
-test socket-1.6 {arg parsing for socket command} {
-    list [catch {socket -myport xxxx} msg] $msg
-} {1 {expected integer but got "xxxx"}}
-test socket-1.7 {arg parsing for socket command} {
-    list [catch {socket -myport 2522} msg] $msg
-} {1 {wrong # args: should be either:
-socket ?-myaddr addr? ?-myport myport? ?-async? host port
-socket -server command ?-myaddr addr? port}}
-test socket-1.8 {arg parsing for socket command} {
-    list [catch {socket -froboz} msg] $msg
-} {1 {bad option "-froboz", must be -async, -myaddr, -myport, or -server}}
-test socket-1.9 {arg parsing for socket command} {
-    list [catch {socket -server foo -myport 2521 3333} msg] $msg
-} {1 {Option -myport is not valid for servers}}
-test socket-1.10 {arg parsing for socket command} {
-    list [catch {socket host 2528 -junk} msg] $msg
-} {1 {wrong # args: should be either:
-socket ?-myaddr addr? ?-myport myport? ?-async? host port
-socket -server command ?-myaddr addr? port}}
-test socket-1.11 {arg parsing for socket command} {
-    list [catch {socket -server callback 2520 --} msg] $msg
-} {1 {wrong # args: should be either:
-socket ?-myaddr addr? ?-myport myport? ?-async? host port
-socket -server command ?-myaddr addr? port}}
-test socket-1.12 {arg parsing for socket command} {
-    list [catch {socket foo badport} msg] $msg
-} {1 {expected integer but got "badport"}}
-
-test socket-2.1 {tcp connection} {stdio} {
-    removeFile script
-    set f [open script w]
-    puts $f {
-	set timer [after 2000 "set x timed_out"]
-	set f [socket -server accept 2828]
-	proc accept {file addr port} {
-	    global x
-	    set x done
-            close $file
-	}
-	puts ready
-	vwait x
-	after cancel $timer
-	close $f
-	puts $x
-    }
-    close $f
-    set f [open "|[list $tcltest script]" r]
-    gets $f x
-    if {[catch {socket localhost 2828} msg]} {
-        set x $msg
-    } else {
-        lappend x [gets $f]
-        close $msg
-    }
-    lappend x [gets $f]
-    close $f
-    set x
-} {ready done {}}
-
-if [info exists port] {
-    incr port
-} else { 
-    set port [expr 2048 + [pid]%1024]
-}
-test socket-2.2 {tcp connection with client port specified} {stdio} {
-    removeFile script
-    set f [open script w]
-    puts $f {
-	set timer [after 2000 "set x done"]
-        set f [socket -server accept 2828]
-	proc accept {file addr port} {
-            global x
-            puts "[gets $file] $port"
-            close $file
-            set x done
-	}
-	puts ready
-	vwait x
-	after cancel $timer
-	close $f
-    }
-    close $f
-    set f [open "|[list $tcltest script]" r]
-    gets $f x
-    global port
-    if {[catch {socket -myport $port localhost 2828} sock]} {
-        set x $sock
-	close [socket localhost 2828]
-	puts stderr $sock
-    } else {
-        puts $sock hello
-	flush $sock
-        lappend x [gets $f]
-        close $sock
-    }
-    close $f
-    set x
-} [list ready "hello $port"]
-test socket-2.3 {tcp connection with client interface specified} {stdio} {
-    removeFile script
-    set f [open script w]
-    puts $f {
-	set timer [after 2000 "set x done"]
-        set f [socket  -server accept 2828]
-	proc accept {file addr port} {
-            global x
-            puts "[gets $file] $addr"
-            close $file
-            set x done
-	}
-	puts ready
-	vwait x
-	after cancel $timer
-	close $f
-    }
-    close $f
-    set f [open "|[list $tcltest script]" r]
-    gets $f x
-    if {[catch {socket -myaddr localhost localhost 2828} sock]} {
-        set x $sock
-    } else {
-        puts $sock hello
-	flush $sock
-        lappend x [gets $f]
-        close $sock
-    }
-    close $f
-    set x
-} {ready {hello 127.0.0.1}}
-test socket-2.4 {tcp connection with server interface specified} {stdio} {
-    removeFile script
-    set f [open script w]
-    puts $f {
-	set timer [after 2000 "set x done"]
-        set f [socket -server accept -myaddr [info hostname] 2828]
-	proc accept {file addr port} {
-            global x
-            puts "[gets $file]"
-            close $file
-            set x done
-	}
-	puts ready
-	vwait x
-	after cancel $timer
-	close $f
-    }
-    close $f
-    set f [open "|[list $tcltest script]" r]
-    gets $f x
-    if {[catch {socket [info hostname] 2828} sock]} {
-        set x $sock
-    } else {
-        puts $sock hello
-	flush $sock
-        lappend x [gets $f]
-        close $sock
-    }
-    close $f
-    set x
-} {ready hello}
-test socket-2.5 {tcp connection with redundant server port} {stdio} {
-    removeFile script
-    set f [open script w]
-    puts $f {
-	set timer [after 2000 "set x done"]
-        set f [socket -server accept 2828]
-	proc accept {file addr port} {
-            global x
-            puts "[gets $file]"
-            close $file
-            set x done
-	}
-	puts ready
-	vwait x
-	after cancel $timer
-	close $f
-    }
-    close $f
-    set f [open "|[list $tcltest script]" r]
-    gets $f x
-    if {[catch {socket localhost 2828} sock]} {
-        set x $sock
-    } else {
-        puts $sock hello
-	flush $sock
-        lappend x [gets $f]
-        close $sock
-    }
-    close $f
-    set x
-} {ready hello}
-test socket-2.6 {tcp connection} {} {
-    set status ok
-    if {![catch {set sock [socket localhost 2828]}]} {
-	if {![catch {gets $sock}]} {
-	    set status broken
-	}
-	close $sock
-    }
-    set status
-} ok
-test socket-2.7 {echo server, one line} {stdio} {
-    removeFile script
-    set f [open script w]
-    puts $f {
-	set timer [after 2000 "set x done"]
-	set f [socket -server accept 2828]
-	proc accept {s a p} {
-            fileevent $s readable [list echo $s]
-	    fconfigure $s -translation lf -buffering line
-        }
-	proc echo {s} {
-	     set l [gets $s]
-             if {[eof $s]} {
-                 global x
-                 close $s
-                 set x done
-             } else {
-                 puts $s $l
-             }
-	}
-	puts ready
-	vwait x
-	after cancel $timer
-	close $f
-	puts done
-    }
-    close $f
-    set f [open "|[list $tcltest script]" r]
-    gets $f
-    set s [socket localhost 2828]
-    fconfigure $s -buffering line -translation lf
-    puts $s "hello abcdefghijklmnop"
-    set x [gets $s]
-    close $s
-    set y [gets $f]
-    close $f
-    list $x $y
-} {{hello abcdefghijklmnop} done}
-test socket-2.8 {echo server, loop 50 times, single connection} {stdio} {
-    removeFile script
-    set f [open script w]
-    puts $f {
-	set f [socket -server accept 2828]
-	proc accept {s a p} {
-            fileevent $s readable [list echo $s]
-            fconfigure $s -buffering line
-        }
-	proc echo {s} {
-	     global i
-             set l [gets $s]
-             if {[eof $s]} {
-                 global x
-                 close $s
-                 set x done
-             } else { 
-	         incr i
-                 puts $s $l
-             }
-	}
-	set i 0
-	puts ready
-	set timer [after 20000 "set x done"]
-	vwait x
-	after cancel $timer
-	close $f
-	puts "done $i"
-    }
-    close $f
-    set f [open "|[list $tcltest script]" r]
-    gets $f
-    set s [socket localhost 2828]
-    fconfigure $s -buffering line
-    for {set x 0} {$x < 50} {incr x} {
-        puts $s "hello abcdefghijklmnop"
-        gets $s
-    }
-    close $s
-    set x [gets $f]
-    close $f
-    set x
-} {done 50}
-test socket-2.9 {socket conflict} {stdio} {
-    set s [socket -server accept 2828]
-    removeFile script
-    set f [open script w]
-    puts $f {set f [socket -server accept 2828]}
-    close $f
-    set f [open "|[list $tcltest script]" r]
-    gets $f
-    after 100
-    set x [list [catch {close $f} msg] $msg]
-    close $s
-    set x
-} {1 {couldn't open socket: address already in use
-    while executing
-"socket -server accept 2828"
-    (file "script" line 1)}}
-test socket-2.10 {close on accept, accepted socket lives} {
-    set done 0
-    set timer [after 20000 "set done timed_out"]
-    set ss [socket -server accept 2830]
-    proc accept {s a p} {
-	global ss
-	close $ss
-	fileevent $s readable "readit $s"
-	fconfigure $s -trans lf
-    }
-    proc readit {s} {
-	global done
-	gets $s
-	close $s
-	set done 1
-    }
-    set cs [socket [info hostname] 2830]
-    puts $cs hello
-    close $cs
-    vwait done
-    after cancel $timer
-    set done
-} 1
-test socket-2.11 {detecting new data} {
-    proc accept {s a p} {
-	global sock
-	set sock $s
-    }
-
-    set s [socket -server accept 2400]
-    set sock ""
-    set s2 [socket localhost 2400]
-    vwait sock
-    puts $s2 one
-    flush $s2
-    after 500
-    fconfigure $sock -blocking 0
-    set result [gets $sock]
-    lappend result [gets $sock]
-    fconfigure $sock -blocking 1
-    puts $s2 two
-    flush $s2
-    fconfigure $sock -blocking 0
-    lappend result [gets $sock]
-    fconfigure $sock -blocking 1
-    close $s2
-    close $s
-    close $sock
-    set result
-} {one {} two}
-
-
-test socket-3.1 {socket conflict} {stdio} {
-    removeFile script
-    set f [open script w]
-    puts $f {
-	set f [socket -server accept 2828]
-	puts ready
-	gets stdin
-	close $f
-    }
-    close $f
-    set f [open "|[list $tcltest script]" r+]
-    gets $f
-    set x [list [catch {socket -server accept 2828} msg] \
-		$msg]
-    puts $f bye
-    close $f
-    set x
-} {1 {couldn't open socket: address already in use}}
-test socket-3.2 {server with several clients} {stdio} {
-    removeFile script
-    set f [open script w]
-    puts $f {
-	set t1 [after 30000 "set x timed_out"]
-	set t2 [after 31000 "set x timed_out"]
-	set t3 [after 32000 "set x timed_out"]
-	set counter 0
-	set s [socket -server accept 2828]
-	proc accept {s a p} {
-	    fileevent $s readable [list echo $s]
-	    fconfigure $s -buffering line
-	}
-	proc echo {s} {
-	     global x
-             set l [gets $s]
-             if {[eof $s]} {
-                 close $s
-                 set x done
-             } else {
-                 puts $s $l
-             }
-	}
-	puts ready
-	vwait x
-	after cancel $t1
-	vwait x
-	after cancel $t2
-	vwait x
-	after cancel $t3
-	close $s
-	puts $x
-    }
-    close $f
-    set f [open "|[list $tcltest script]" r+]
-    set x [gets $f]
-    set s1 [socket localhost 2828]
-    fconfigure $s1 -buffering line
-    set s2 [socket localhost 2828]
-    fconfigure $s2 -buffering line
-    set s3 [socket localhost 2828]
-    fconfigure $s3 -buffering line
-    for {set i 0} {$i < 100} {incr i} {
-	puts $s1 hello,s1
-	gets $s1
-	puts $s2 hello,s2
-	gets $s2
-	puts $s3 hello,s3
-	gets $s3
-    }
-    close $s1
-    close $s2
-    close $s3
-    lappend x [gets $f]
-    close $f
-    set x
-} {ready done}
-
-test socket-4.1 {server with several clients} {stdio} {
-    removeFile script
-    set f [open script w]
-    puts $f {
-	gets stdin
-	set s [socket localhost 2828]
-	fconfigure $s -buffering line
-	for {set i 0} {$i < 100} {incr i} {
-	    puts $s hello
-	    gets $s
-	}
-	close $s
-	puts bye
-	gets stdin
-    }
-    close $f
-    set p1 [open "|[list $tcltest script]" r+]
-    fconfigure $p1 -buffering line
-    set p2 [open "|[list $tcltest script]" r+]
-    fconfigure $p2 -buffering line
-    set p3 [open "|[list $tcltest script]" r+]
-    fconfigure $p3 -buffering line
-    proc accept {s a p} {
-	fconfigure $s -buffering line
-	fileevent $s readable [list echo $s]
-    }
-    proc echo {s} {
-	global x
-        set l [gets $s]
-        if {[eof $s]} {
-            close $s
-            set x done
-        } else {
-            puts $s $l
-        }
-    }
-    set t1 [after 30000 "set x timed_out"]
-    set t2 [after 31000 "set x timed_out"]
-    set t3 [after 32000 "set x timed_out"]
-    set s [socket -server accept 2828]
-    puts $p1 open
-    puts $p2 open
-    puts $p3 open
-    vwait x
-    vwait x
-    vwait x
-    after cancel $t1
-    after cancel $t2
-    after cancel $t3
-    close $s
-    set l ""
-    lappend l [list p1 [gets $p1] $x]
-    lappend l [list p2 [gets $p2] $x]
-    lappend l [list p3 [gets $p3] $x]
-    puts $p1 bye
-    puts $p2 bye
-    puts $p3 bye
-    close $p1
-    close $p2
-    close $p3
-    set l
-} {{p1 bye done} {p2 bye done} {p3 bye done}}
-test socket-4.2 {byte order problems, socket numbers, htons} {
-    set x ok
-    if {[catch {socket -server dodo 0x3000} msg]} {
-	set x $msg
-    } else {
-	close $msg
-    }
-    set x
-} ok
-
-test socket-5.1 {byte order problems, socket numbers, htons} {unixOnly} {
-    #
-    # THIS TEST WILL FAIL if you are running as superuser.
-    #
-    set x {couldn't open socket: not owner}
-    if {![catch {socket -server dodo 0x1} msg]} {
-        set x {htons problem, should be disallowed, are you running as SU?}
-	close $msg
-    }
-    set x
-} {couldn't open socket: not owner}
-test socket-5.2 {byte order problems, socket numbers, htons} {
-    set x {couldn't open socket: port number too high}
-    if {![catch {socket -server dodo 0x10000} msg]} {
-	set x {port resolution problem, should be disallowed}
-	close $msg
-    }
-    set x
-} {couldn't open socket: port number too high}
-test socket-5.3 {byte order problems, socket numbers, htons} {unixOnly} {
-    #
-    # THIS TEST WILL FAIL if you are running as superuser.
-    #
-    set x {couldn't open socket: not owner}
-    if {![catch {socket -server dodo 21} msg]} {
-	set x {htons problem, should be disallowed, are you running as SU?}
-	close $msg
-    }
-    set x
-} {couldn't open socket: not owner}
-
-test socket-6.1 {accept callback error} {stdio} {
-    removeFile script
-    set f [open script w]
-    puts $f {
-	gets stdin
-	socket localhost 2848
-    }
-    close $f
-    set f [open "|[list $tcltest script]" r+]
-    proc bgerror args {
-	global x
-	set x $args
-    }
-    proc accept {s a p} {expr 10 / 0}
-    set s [socket -server accept 2848]
-    puts $f hello
-    close $f
-    set timer [after 10000 "set x timed_out"]
-    vwait x
-    after cancel $timer
-    close $s
-    rename bgerror {}
-    set x
-} {{divide by zero}}
-
-test socket-7.1 {testing socket specific options} {stdio} {
-    removeFile script
-    set f [open script w]
-    puts $f {
-	socket -server accept 2820
-	proc accept args {
-	    global x
-	    set x done
-	}
-	puts ready
-	set timer [after 10000 "set x timed_out"]
-	vwait x
-	after cancel $timer
-    }
-    close $f
-    set f [open "|[list $tcltest script]" r]
-    gets $f
-    set s [socket localhost 2820]
-    set p [fconfigure $s -peername]
-    close $s
-    close $f
-    set l ""
-    lappend l [string compare [lindex $p 0] 127.0.0.1]
-    lappend l [string compare [lindex $p 2] 2820]
-    lappend l [llength $p]
-} {0 0 3}
-test socket-7.2 {testing socket specific options} {stdio} {
-    removeFile script
-    set f [open script w]
-    puts $f {
-	socket -server accept 2821
-	proc accept args {
-	    global x
-	    set x done
-	}
-	puts ready
-	set timer [after 10000 "set x timed_out"]
-	vwait x
-	after cancel $timer
-    }
-    close $f
-    set f [open "|[list $tcltest script]" r]
-    gets $f
-    set s [socket localhost 2821]
-    set p [fconfigure $s -sockname]
-    close $s
-    close $f
-    set l ""
-    lappend l [llength $p]
-    lappend l [lindex $p 0]
-    lappend l [expr [lindex $p 2] == 2821]
-} {3 127.0.0.1 0}
-test socket-7.3 {testing socket specific options} {
-    set s [socket -server accept 2822]
-    set l [fconfigure $s]
-    close $s
-    update
-    llength $l
-} 10
-test socket-7.4 {testing socket specific options} {
-    set s [socket -server accept 2823]
-    proc accept {s a p} {
-	global x
-	set x [fconfigure $s -sockname]
-	close $s
-    }
-    set s1 [socket [info hostname] 2823]
-    set timer [after 10000 "set x timed_out"]
-    vwait x
-    after cancel $timer
-    close $s
-    close $s1
-    set l ""
-    lappend l [lindex $x 2] [llength $x]
-} {2823 3}
-test socket-7.5 {testing socket specific options} {unixOrPc} {
-    set s [socket -server accept 2829]
-    proc accept {s a p} {
-	global x
-	set x [fconfigure $s -sockname]
-	close $s
-    }
-    set s1 [socket localhost 2829]
-    set timer [after 10000 "set x timed_out"]
-    vwait x
-    after cancel $timer
-    close $s
-    close $s1
-    set l ""
-    lappend l [lindex $x 0] [lindex $x 2] [llength $x]
-} {127.0.0.1 2829 3}
-
-test socket-8.1 {testing -async flag on sockets} {
-    # NOTE: This test may fail on some Solaris 2.4 systems. If it does,
-    # check that you have these patches installed (using showrev -p):
-    #
-    # 101907-05, 101925-02, 101945-14, 101959-03, 101969-05, 101973-03,
-    # 101977-03, 101981-02, 101985-01, 102001-03, 102003-01, 102007-01,
-    # 102011-02, 102024-01, 102039-01, 102044-01, 102048-01, 102062-03,
-    # 102066-04, 102070-01, 102105-01, 102153-03, 102216-01, 102232-01,
-    # 101878-03, 101879-01, 101880-03, 101933-01, 101950-01, 102030-01,
-    # 102057-08, 102140-01, 101920-02, 101921-09, 101922-07, 101923-03
-    #
-    # If after installing these patches you are still experiencing a
-    # problem, please email jyl@eng.sun.com. We have not observed this
-    # failure on Solaris 2.5, so another option (instead of installing
-    # these patches) is to upgrade to Solaris 2.5.
-    set s [socket -server accept 2830]
-    proc accept {s a p} {
-	global x
-	puts $s bye
-	close $s
-	set x done
-    }
-    set s1 [socket -async [info hostname] 2830]
-    vwait x
-    set z [gets $s1]
-    close $s
-    close $s1
-    set z
-} bye
-
-test socket-9.1 {testing spurious events} {
-    set len 0
-    set spurious 0
-    set done 0
-    proc readlittle {s} {
-	global spurious done len
-	set l [read $s 1]
-	if {[string length $l] == 0} {
-	    if {![eof $s]} {
-		incr spurious
-	    } else {
-		close $s
-		set done 1
-	    }
-	} else {
-	    incr len [string length $l]
-	}
-    }
-    proc accept {s a p} {
-	fconfigure $s -buffering none -blocking off
-	fileevent $s readable [list readlittle $s]
-    }
-    set s [socket -server accept 2831]
-    set c [socket [info hostname] 2831]
-    puts -nonewline $c 01234567890123456789012345678901234567890123456789
-    close $c
-    set timer [after 10000 "set done timed_out"]
-    vwait done
-    after cancel $timer
-    close $s
-    list $spurious $len
-} {0 50}
-test socket-9.2 {testing async write, fileevents, flush on close} {} {
-    set firstblock ""
-    for {set i 0} {$i < 5} {incr i} {set firstblock "a$firstblock$firstblock"}
-    set secondblock ""
-    for {set i 0} {$i < 16} {incr i} {
-	set secondblock "b$secondblock$secondblock"
-    }
-    set l [socket -server accept 2832]
-    proc accept {s a p} {
-	fconfigure $s -blocking 0 -translation lf -buffersize 16384 \
-		-buffering line
-	fileevent $s readable "readable $s"
-    }
-    proc readable {s} {
-	set l [gets $s]
-	fileevent $s readable {}
-	after 1000 respond $s
-    }
-    proc respond {s} {
-	global firstblock
-	puts -nonewline $s $firstblock
-	after 1000 writedata $s
-    }
-    proc writedata {s} {
-	global secondblock
-	puts -nonewline $s $secondblock
-	close $s
-    }
-    set s [socket [info hostname] 2832]
-    fconfigure $s -blocking 0 -trans lf -buffering line
-    set count 0
-    puts $s hello
-    proc readit {s} {
-	global count done
-	set l [read $s]
-	incr count [string length $l]
-	if {[eof $s]} {
-	    close $s
-	    set done 1
-	}
-    }
-    fileevent $s readable "readit $s"
-    set timer [after 10000 "set done timed_out"]
-    vwait done
-    after cancel $timer
-    close $l
-    set count
-} 65566
-test socket-9.3 {testing EOF stickyness} {
-    proc count_to_eof {s} {
-	global count done timer
-	set l [gets $s]
-	if {[eof $s]} {
-	    incr count
-	    if {$count > 9} {
-		close $s
-		set done true
-		set count {eof is sticky}
-		after cancel $timer
-	    }
-	}
-    }
-    proc timerproc {} {
-	global done count c
-	set done true
-	set count {timer went off, eof is not sticky}
-	close $c
-    }	
-    set count 0
-    set done false
-    proc write_then_close {s} {
-	puts $s bye
-	close $s
-    }
-    proc accept {s a p} {
-	fconfigure $s -buffering line -translation lf
-	fileevent $s writable "write_then_close $s"
-    }
-    set s [socket -server accept 2833]
-    set c [socket [info hostname] 2833]
-    fconfigure $c -blocking off -buffering line -translation lf
-    fileevent $c readable "count_to_eof $c"
-    set timer [after 1000 timerproc]
-    vwait done
-    close $s
-    set count
-} {eof is sticky}
-
-test socket-10.1 {testing socket accept callback error handling} {
-    set goterror 0
-    proc bgerror args {global goterror; set goterror 1}
-    set s [socket -server accept 2898]
-    proc accept {s a p} {close $s; error}
-    set c [socket localhost 2898]
-    vwait goterror
-    close $s
-    close $c
-    set goterror
-} 1
-
-removeFile script
-
-#
-# The rest of the tests are run only if we are doing testing against
-# a remote server.
-#
-
-if {$doTestsWithRemoteServer == 0} {
-    return
-}
-
-test socket-11.1 {tcp connection} {
-    sendCommand {
-	set socket9_1_test_server [socket -server accept 2834]
-	proc accept {s a p} {
-	    puts $s done
-	    close $s
-	}
-    }
-    set s [socket $remoteServerIP 2834]
-    set r [gets $s]
-    close $s
-    sendCommand {close $socket9_1_test_server}
-    set r
-} done
-test socket-11.2 {client specifies its port} {
-    if {[info exists port]} {
-	incr port
-    } else {
-	set port [expr 2048 + [pid]%1024]
-    }
-    sendCommand {
-	set socket9_2_test_server [socket -server accept 2835]
-	proc accept {s a p} {
-	    puts $s $p
-	    close $s
-	}
-    }
-    set s [socket -myport $port $remoteServerIP 2835]
-    set r [gets $s]
-    close $s
-    sendCommand {close $socket9_2_test_server}
-    if {$r == $port} {
-	set result ok
-    } else {
-	set result broken
-    }
-    set result
-} ok
-test socket-11.3 {trying to connect, no server} {
-    set status ok
-    if {![catch {set s [socket $remoteServerIp 2836]}]} {
-	if {![catch {gets $s}]} {
-	    set status broken
-	}
-	close $s
-    }
-    set status
-} ok
-test socket-11.4 {remote echo, one line} {
-    sendCommand {
-	set socket10_6_test_server [socket -server accept 2836]
-	proc accept {s a p} {
-	    fileevent $s readable [list echo $s]
-	    fconfigure $s -buffering line -translation crlf
-	}
-	proc echo {s} {
-	    set l [gets $s]
-	    if {[eof $s]} {
-		close $s
-	    } else {
-		puts $s $l
-	    }
-	}
-    }
-    set f [socket $remoteServerIP 2836]
-    fconfigure $f -translation crlf -buffering line
-    puts $f hello
-    set r [gets $f]
-    close $f
-    sendCommand {close $socket10_6_test_server}
-    set r
-} hello
-test socket-11.5 {remote echo, 50 lines} {
-    sendCommand {
-	set socket10_7_test_server [socket -server accept 2836]
-	proc accept {s a p} {
-	    fileevent $s readable [list echo $s]
-	    fconfigure $s -buffering line -translation crlf
-	}
-	proc echo {s} {
-	    set l [gets $s]
-	    if {[eof $s]} {
-		close $s
-	    } else {
-		puts $s $l
-	    }
-	}
-    }
-    set f [socket $remoteServerIP 2836]
-    fconfigure $f -translation crlf -buffering line
-    for {set cnt 0} {$cnt < 50} {incr cnt} {
-	puts $f "hello, $cnt"
-	if {[string compare [gets $f] "hello, $cnt"] != 0} {
-	    break
-	}
-    }
-    close $f
-    sendCommand {close $socket10_7_test_server}
-    set cnt
-} 50
-# Macintosh sockets can have more than one server per port
-if {$tcl_platform(platform) == "macintosh"} {
-    set conflictResult {0 2836}
-} else {
-    set conflictResult {1 {couldn't open socket: address already in use}}
-}
-test socket-11.6 {socket conflict} {
-    set s1 [socket -server accept 2836]
-    if {[catch {set s2 [socket -server accept 2836]} msg]} {
-	set result [list 1 $msg]
-    } else {
-	set result [list 0 [lindex [fconfigure $s2 -sockname] 2]]
-	close $s2
-    }
-    close $s1
-    set result
-} $conflictResult
-test socket-11.7 {server with several clients} {
-    sendCommand {
-	set socket10_9_test_server [socket -server accept 2836]
-	proc accept {s a p} {
-	    fconfigure $s -buffering line
-	    fileevent $s readable [list echo $s]
-	}
-	proc echo {s} {
-	    set l [gets $s]
-	    if {[eof $s]} {
-		close $s
-	    } else {
-		puts $s $l
-	    }
-	}
-    }
-    set s1 [socket $remoteServerIP 2836]
-    fconfigure $s1 -buffering line
-    set s2 [socket $remoteServerIP 2836]
-    fconfigure $s2 -buffering line
-    set s3 [socket $remoteServerIP 2836]
-    fconfigure $s3 -buffering line
-    for {set i 0} {$i < 100} {incr i} {
-	puts $s1 hello,s1
-	gets $s1
-	puts $s2 hello,s2
-	gets $s2
-	puts $s3 hello,s3
-	gets $s3
-    }
-    close $s1
-    close $s2
-    close $s3
-    sendCommand {close $socket10_9_test_server}
-    set i
-} 100    
-test socket-11.8 {client with several servers} {
-    sendCommand {
-	set s1 [socket -server "accept 4003" 4003]
-	set s2 [socket -server "accept 4004" 4004]
-	set s3 [socket -server "accept 4005" 4005]
-	proc accept {mp s a p} {
-	    puts $s $mp
-	    close $s
-	}
-    }
-    set s1 [socket $remoteServerIP 4003]
-    set s2 [socket $remoteServerIP 4004]
-    set s3 [socket $remoteServerIP 4005]
-    set l ""
-    lappend l [gets $s1] [gets $s1] [eof $s1] [gets $s2] [gets $s2] [eof $s2] \
-	[gets $s3] [gets $s3] [eof $s3]
-    close $s1
-    close $s2
-    close $s3
-    sendCommand {
-	close $s1
-	close $s2
-	close $s3
-    }
-    set l
-} {4003 {} 1 4004 {} 1 4005 {} 1}
-test socket-11.9 {accept callback error} {
-    set s [socket -server accept 2836]
-    proc accept {s a p} {expr 10 / 0}
-    proc bgerror args {
-	global x
-	set x $args
-    }
-    if {[catch {sendCommand {
-	    set peername [fconfigure $callerSocket -peername]
-	    set s [socket [lindex $peername 0] 2836]
-	    close $s
-    	 }} msg]} {
-	close $s
-	error $msg
-    }
-    set timer [after 10000 "set x timed_out"]
-    vwait x
-    after cancel $timer
-    close $s
-    rename bgerror {}
-    set x
-} {{divide by zero}}
-test socket-11.10 {testing socket specific options} {
-    sendCommand {
-	set socket10_12_test_server [socket -server accept 2836]
-	proc accept {s a p} {close $s}
-    }
-    set s [socket $remoteServerIP 2836]
-    set p [fconfigure $s -peername]
-    set n [fconfigure $s -sockname]
-    set l ""
-    lappend l [lindex $p 2] [llength $p] [llength $p]
-    close $s
-    sendCommand {close $socket10_12_test_server}
-    set l
-} {2836 3 3}
-test socket-11.11 {testing spurious events} {
-    sendCommand {
-	set socket10_13_test_server [socket -server accept 2836]
-	proc accept {s a p} {
-	    fconfigure $s -translation "auto lf"
-	    after 100 writesome $s
-	}
-	proc writesome {s} {
-	    for {set i 0} {$i < 100} {incr i} {
-		puts $s "line $i from remote server"
-	    }
-	    close $s
-	}
-    }
-    set len 0
-    set spurious 0
-    set done 0
-    proc readlittle {s} {
-	global spurious done len
-	set l [read $s 1]
-	if {[string length $l] == 0} {
-	    if {![eof $s]} {
-		incr spurious
-	    } else {
-		close $s
-		set done 1
-	    }
-	} else {
-	    incr len [string length $l]
-	}
-    }
-    set c [socket $remoteServerIP 2836]
-    fileevent $c readable "readlittle $c"
-    set timer [after 10000 "set done timed_out"]
-    vwait done
-    after cancel $timer
-    sendCommand {close $socket10_13_test_server}
-    list $spurious $len
-} {0 2690}
-test socket-11.12 {testing EOF stickyness} {
-    set counter 0
-    set done 0
-    proc count_up {s} {
-	global counter done after_id
-	set l [gets $s]
-	if {[eof $s]} {
-	    incr counter
-	    if {$counter > 9} {
-		set done {EOF is sticky}
-		after cancel $after_id
-		close $s
-	    }
-	}
-    }
-    proc timed_out {} {
-	global c done
-	set done {timed_out, EOF is not sticky}
-	close $c
-    }
-    sendCommand {
-	set socket10_14_test_server [socket -server accept 2836]
-	proc accept {s a p} {
-	    after 100 close $s
-	}
-    }
-    set c [socket $remoteServerIP 2836]
-    fileevent $c readable "count_up $c"
-    set after_id [after 1000 timed_out]
-    vwait done
-    sendCommand {close $socket10_14_test_server}
-    set done
-} {EOF is sticky}
-test socket-11.13 {testing async write, async flush, async close} {
-    proc readit {s} {
-	global count done
-	set l [read $s]
-	incr count [string length $l]
-	if {[eof $s]} {
-	    close $s
-	    set done 1
-	}
-    }
-    sendCommand {
-	set firstblock ""
-	for {set i 0} {$i < 5} {incr i} {
-		set firstblock "a$firstblock$firstblock"
-	}
-	set secondblock ""
-	for {set i 0} {$i < 16} {incr i} {
-	    set secondblock "b$secondblock$secondblock"
-	}
-	set l [socket -server accept 2845]
-	proc accept {s a p} {
-	    fconfigure $s -blocking 0 -translation lf -buffersize 16384 \
-		-buffering line
-	    fileevent $s readable "readable $s"
-	}
-	proc readable {s} {
-	    set l [gets $s]
-	    fileevent $s readable {}
-	    after 1000 respond $s
-	}
-	proc respond {s} {
-	    global firstblock
-	    puts -nonewline $s $firstblock
-	    after 1000 writedata $s
-	}
-	proc writedata {s} {
-	    global secondblock
-	    puts -nonewline $s $secondblock
-	    close $s
-	}
-    }
-    set s [socket $remoteServerIP 2845]
-    fconfigure $s -blocking 0 -trans lf -buffering line
-    set count 0
-    puts $s hello
-    fileevent $s readable "readit $s"
-    set timer [after 10000 "set done timed_out"]
-    vwait done
-    after cancel $timer
-    sendCommand {close $l}
-    set count
-} 65566
-
-test socket-12.1 {testing inheritance of server sockets} {
-    removeFile script1
-    removeFile script2
-
-    # Script1 is just a 10 second delay.  If the server socket
-    # is inherited, it will be held open for 10 seconds
-
-    set f [open script1 w]
-    puts $f {
-	after 10000 exit
-	vwait forever
-    }
-    close $f
-
-    # Script2 creates the server socket, launches script1,
-    # waits a second, and exits.  The server socket will now
-    # be closed unless script1 inherited it.
-
-    set f [open script2 w]
-    puts $f [list set tcltest $tcltest]
-    puts $f {
-	set f [socket -server accept 2828]
-	proc accept { file addr port } {
-	    close $file
-	}
-	exec $tcltest script1 &
-	close $f
-	after 1000 exit
-	vwait forever
-    }
-    close $f
-	
-    # Launch script2 and wait 5 seconds
-
-    exec $tcltest script2 &
-    after 5000 { set ok_to_proceed 1 }
-    vwait ok_to_proceed
-
-    # If we can still connect to the server, the socket got inherited.
-
-    if {[catch {socket localhost 2828} msg]} {
-	set x {server socket was not inherited}
-    } else {
-	close $msg
-	set x {server socket was inherited}
-    }
-
-    removeFile script1
-    removeFile script2
-    set x
-} {server socket was not inherited}
-test socket-12.2 {testing inheritance of client sockets} {
-    removeFile script1
-    removeFile script2
-
-    # Script1 is just a 10 second delay.  If the server socket
-    # is inherited, it will be held open for 10 seconds
-
-    set f [open script1 w]
-    puts $f {
-	after 10000 exit
-	vwait forever
-    }
-    close $f
-
-    # Script2 opens the client socket and writes to it.  It then
-    # launches script1 and exits.  If the child process inherited the
-    # client socket, the socket will still be open.
-
-    set f [open script2 w]
-    puts $f [list set tcltest $tcltest]
-    puts $f {
-	set f [socket localhost 2829]
-	exec $tcltest script1 &
-	puts $f testing
-	flush $f
-	after 1000 exit
-	vwait forever
-    }
-    close $f
-
-    # Create the server socket
-
-    set server [socket -server accept 2829]
-    proc accept { file host port } {
-
-	# When the client connects, establish the read handler
-	global server
-	close $server
-	fileevent $file readable [list getdata $file]
-	fconfigure $file -buffering line -blocking 0
-	return
-    }
-    proc getdata { file } {
-
-	# Read handler on the accepted socket.
-	global x
-	global failed
-	set status [catch {read $file} data]
-	if {$status != 0} {
-	    set x {read failed, error was $data}
-	    catch { close $file }
-	} elseif {[string compare {} $data]} {
-	} elseif {[fblocked $file]} {
-	} elseif {[eof $file]} {
-	    if {$failed} {
-		set x {client socket was inherited}
-	    } else {
-		set x {client socket was not inherited}
-	    }
-	    catch { close $file }
-	} else {
-	    set x {impossible case}
-	    catch { close $file }
-	}
-	return
-    }
-
-    # If the socket doesn't hit end-of-file in 5 seconds, the
-    # script1 process must have inherited the client.
-
-    set failed 0
-    after 5000 [list set failed 1]
-
-    # Launch the script2 process
-
-    exec $tcltest script2 &
-
-    vwait x
-    if {!$failed} {
-	vwait failed
-    }
-    removeFile script1
-    removeFile script2
-    set x
-} {client socket was not inherited}
-test socket-12.3 {testing inheritance of accepted sockets} {
-    removeFile script1
-    removeFile script2
-
-    set f [open script1 w]
-    puts $f {
-	after 10000 exit
-	vwait forever
-    }
-    close $f
-
-    set f [open script2 w]
-    puts $f [list set tcltest $tcltest]
-    puts $f {
-	set server [socket -server accept 2930]
-	proc accept { file host port } {
-	    global tcltest
-	    puts $file {test data on socket}
-	    exec $tcltest script1 &
-	    after 1000 exit
-	}
-	vwait forever
-    }
-    close $f
-
-    # Launch the script2 process and connect to it.  See how long
-    # the socket stays open
-
-    exec $tcltest script2 &
-
-    after 1000 set ok_to_proceed 1
-    vwait ok_to_proceed
-
-    set f [socket localhost 2930]
-    fconfigure $f -buffering full -blocking 0
-    fileevent $f readable [list getdata $f]
-
-    # If the socket is still open after 5 seconds, the script1 process
-    # must have inherited the accepted socket.
-
-    set failed 0
-    after 5000 set failed 1
-
-    proc getdata { file } {
-
-	# Read handler on the client socket.
-	global x
-	global failed
-	set status [catch {read $file} data]
-	if {$status != 0} {
-	    set x {read failed, error was $data}
-	    catch { close $file }
-	} elseif {[string compare {} $data]} {
-	} elseif {[fblocked $file]} {
-	} elseif {[eof $file]} {
-	    if {$failed} {
-		set x {accepted socket was inherited}
-	    } else {
-		set x {accepted socket was not inherited}
-	    }
-	    catch { close $file }
-	} else {
-	    set x {impossible case}
-	    catch { close $file }
-	}
-	return
-    }
-    
-    vwait x
-
-    removeFile script1
-    removeFile script2
-    set x
-} {accepted socket was not inherited}
-
-
-if {[string match sock* $commandSocket] == 1} {
-   puts $commandSocket exit
-   flush $commandSocket
-}
-catch {close $commandSocket}
-catch {close $remoteProcChan}
-
-set x ""
-unset x