summaryrefslogtreecommitdiffstats
path: root/compat
diff options
context:
space:
mode:
Diffstat (limited to 'compat')
-rw-r--r--compat/strftime.c538
-rw-r--r--compat/strtoll.c107
-rw-r--r--compat/strtoull.c255
-rw-r--r--compat/tclErrno.h99
-rw-r--r--compat/tmpnam.c42
-rw-r--r--compat/unicows/license.txt19
-rw-r--r--compat/unicows/readme.txt163
-rw-r--r--compat/unicows/unicows.libbin0 -> 492330 bytes
-rw-r--r--compat/zlib/algorithm.txt209
-rw-r--r--compat/zlib/as400/bndsrc132
-rw-r--r--compat/zlib/as400/compile.clp123
-rw-r--r--compat/zlib/as400/readme.txt111
-rw-r--r--compat/zlib/as400/zlib.inc331
-rw-r--r--compat/zlib/gzio.c1026
-rw-r--r--compat/zlib/old/zlib.html971
-rw-r--r--compat/zlib/projects/README.projects41
-rw-r--r--compat/zlib/projects/visualc6/README.txt73
-rw-r--r--compat/zlib/projects/visualc6/example.dsp278
-rw-r--r--compat/zlib/projects/visualc6/minigzip.dsp278
-rw-r--r--compat/zlib/projects/visualc6/zlib.dsp621
-rw-r--r--compat/zlib/projects/visualc6/zlib.dsw59
-rw-r--r--compat/zlib/zconf.in.h332
22 files changed, 5808 insertions, 0 deletions
diff --git a/compat/strftime.c b/compat/strftime.c
new file mode 100644
index 0000000..91e7057
--- /dev/null
+++ b/compat/strftime.c
@@ -0,0 +1,538 @@
+/*
+ * strftime.c --
+ *
+ * This file contains a modified version of the BSD 4.4 strftime
+ * function.
+ *
+ * This file is a modified version of the strftime.c file from the BSD 4.4
+ * source. See the copyright notice below for details on redistribution
+ * restrictions. The "license.terms" file does not apply to this file.
+ *
+ * Changes 2002 Copyright (c) 2002 ActiveState Corporation.
+ *
+ * RCS: @(#) $Id: strftime.c,v 1.17 2004/09/08 18:46:18 kennykb Exp $
+ */
+
+/*
+ * Copyright (c) 1989 The Regents of the University of California.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ * must display the following acknowledgement:
+ * This product includes software developed by the University of
+ * California, Berkeley and its contributors.
+ * 4. Neither the name of the University nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#if defined(LIBC_SCCS)
+static char *rcsid = "$Id: strftime.c,v 1.17 2004/09/08 18:46:18 kennykb Exp $";
+#endif /* LIBC_SCCS */
+
+#include <time.h>
+#include <string.h>
+#include <locale.h>
+#include "tclInt.h"
+
+#define TM_YEAR_BASE 1900
+#define IsLeapYear(x) ((x % 4 == 0) && (x % 100 != 0 || x % 400 == 0))
+
+/*
+ * Structure type holding the locale-dependent strings for formatting
+ * times. The strings are all expected to be encoded in UTF-8.
+ */
+
+typedef struct {
+ const char *abday[7]; /* Abbreviated weekday names */
+ const char *day[7]; /* Full weekday names */
+ const char *abmon[12]; /* Abbreviated month names */
+ const char *mon[12]; /* Full month name */
+ const char *am_pm[2]; /* The strings to use for meridian time
+ * (am, pm) */
+ const char *d_t_fmt; /* The locale-dependent date-time format */
+ const char *d_fmt; /* The locale-dependent date format */
+ const char *t_fmt; /* The locale-dependent 24hr time format */
+ const char *t_fmt_ampm; /* The locale-dependent 12hr time format */
+} _TimeLocale;
+
+/*
+ * This is the C locale default. On Windows, if we wanted to make this
+ * localized, we would use GetLocaleInfo to get the correct values.
+ * It may be acceptable to do localization of month/day names, as the
+ * numerical values would be considered the locale-independent versions.
+ */
+static const _TimeLocale _DefaultTimeLocale =
+{
+ {
+ "Sun","Mon","Tue","Wed","Thu","Fri","Sat",
+ },
+ {
+ "Sunday", "Monday", "Tuesday", "Wednesday", "Thursday",
+ "Friday", "Saturday"
+ },
+ {
+ "Jan", "Feb", "Mar", "Apr", "May", "Jun",
+ "Jul", "Aug", "Sep", "Oct", "Nov", "Dec"
+ },
+ {
+ "January", "February", "March", "April", "May", "June", "July",
+ "August", "September", "October", "November", "December"
+ },
+ {
+ "AM", "PM"
+ },
+ "%a %b %d %H:%M:%S %Y",
+ "%m/%d/%y",
+ "%H:%M:%S",
+ "%I:%M:%S %p"
+};
+
+static CONST _TimeLocale *_CurrentTimeLocale = &_DefaultTimeLocale;
+
+static int isGMT;
+static size_t gsize;
+static char *pt;
+static int _add _ANSI_ARGS_((CONST char* str));
+static int _conv _ANSI_ARGS_((int n, int digits, int pad));
+static int _secs _ANSI_ARGS_((CONST struct tm *t));
+static size_t _fmt _ANSI_ARGS_((CONST char *format,
+ const struct tm *t));
+static int ISO8601Week _ANSI_ARGS_((CONST struct tm* t, int *year ));
+
+/*
+ *----------------------------------------------------------------------
+ *
+ * TclpStrftime --
+ *
+ * Formats a time (in 'struct tm' representation) for use by
+ * [clock format].
+ *
+ * Results:
+ * Returns the length of the formatted string.
+ *
+ * Side effects:
+ * Stores the formatted string in the 's' parameter. The
+ * formatted string is returned in UTF-8 encoding, *not* the
+ * system encoding.
+ *
+ *----------------------------------------------------------------------
+ */
+
+size_t
+TclpStrftime(s, maxsize, format, t, useGMT)
+ char *s; /* Buffer to hold the formatted string */
+ size_t maxsize; /* Size of the passed buffer */
+ CONST char *format; /* Format to use (see the user documentation
+ * for [clock] for details) */
+ CONST struct tm *t; /* Time to format */
+ int useGMT; /* Flag == 1 if time is to be returned
+ * in UTC */
+{
+ if (format[0] == '%' && format[1] == 'Q') {
+ /* Format as a stardate */
+ sprintf(s, "Stardate %2d%03d.%01d",
+ (((t->tm_year + TM_YEAR_BASE) + 377) - 2323),
+ (((t->tm_yday + 1) * 1000) /
+ (365 + IsLeapYear((t->tm_year + TM_YEAR_BASE)))),
+ (((t->tm_hour * 60) + t->tm_min)/144));
+ return(strlen(s));
+ }
+
+ isGMT = useGMT;
+ /*
+ * We may be able to skip this for useGMT, but it should be harmless.
+ * -- hobbs
+ */
+ tzset();
+
+ pt = s;
+ if ((gsize = maxsize) < 1)
+ return(0);
+ if (_fmt(format, t)) {
+ *pt = '\0';
+ return(maxsize - gsize);
+ }
+ return(0);
+}
+
+#define SUN_WEEK(t) (((t)->tm_yday + 7 - \
+ ((t)->tm_wday)) / 7)
+#define MON_WEEK(t) (((t)->tm_yday + 7 - \
+ ((t)->tm_wday ? (t)->tm_wday - 1 : 6)) / 7)
+
+static size_t
+_fmt(format, t)
+ CONST char *format;
+ CONST struct tm *t;
+{
+#ifdef __WIN32__
+#define BUF_SIZ 256
+ TCHAR buf[BUF_SIZ];
+ SYSTEMTIME syst;
+ syst.wYear = t->tm_year + 1900;
+ syst.wMonth = t->tm_mon + 1;
+ syst.wDayOfWeek = t->tm_wday;
+ syst.wDay = t->tm_mday;
+ syst.wHour = t->tm_hour;
+ syst.wMinute = t->tm_min;
+ syst.wSecond = t->tm_sec;
+ syst.wMilliseconds = 0;
+#endif
+ for (; *format; ++format) {
+ if (*format == '%') {
+ ++format;
+ if (*format == 'E') {
+ /* Alternate Era */
+ ++format;
+ } else if (*format == 'O') {
+ /* Alternate numeric symbols */
+ ++format;
+ }
+ switch(*format) {
+ case '\0':
+ --format;
+ break;
+ case 'A':
+ if (t->tm_wday < 0 || t->tm_wday > 6)
+ return(0);
+ if (!_add(_CurrentTimeLocale->day[t->tm_wday]))
+ return(0);
+ continue;
+ case 'a':
+ if (t->tm_wday < 0 || t->tm_wday > 6)
+ return(0);
+ if (!_add(_CurrentTimeLocale->abday[t->tm_wday]))
+ return(0);
+ continue;
+ case 'B':
+ if (t->tm_mon < 0 || t->tm_mon > 11)
+ return(0);
+ if (!_add(_CurrentTimeLocale->mon[t->tm_mon]))
+ return(0);
+ continue;
+ case 'b':
+ case 'h':
+ if (t->tm_mon < 0 || t->tm_mon > 11)
+ return(0);
+ if (!_add(_CurrentTimeLocale->abmon[t->tm_mon]))
+ return(0);
+ continue;
+ case 'C':
+ if (!_conv((t->tm_year + TM_YEAR_BASE) / 100,
+ 2, '0'))
+ return(0);
+ continue;
+ case 'D':
+ if (!_fmt("%m/%d/%y", t))
+ return(0);
+ continue;
+ case 'd':
+ if (!_conv(t->tm_mday, 2, '0'))
+ return(0);
+ continue;
+ case 'e':
+ if (!_conv(t->tm_mday, 2, ' '))
+ return(0);
+ continue;
+ case 'g':
+ {
+ int year;
+ ISO8601Week( t, &year );
+ if ( !_conv( year%100, 2, '0' ) ) {
+ return( 0 );
+ }
+ continue;
+ }
+ case 'G':
+ {
+ int year;
+ ISO8601Week( t, &year );
+ if ( !_conv( year, 4, '0' ) ) {
+ return( 0 );
+ }
+ continue;
+ }
+ case 'H':
+ if (!_conv(t->tm_hour, 2, '0'))
+ return(0);
+ continue;
+ case 'I':
+ if (!_conv(t->tm_hour % 12 ?
+ t->tm_hour % 12 : 12, 2, '0'))
+ return(0);
+ continue;
+ case 'j':
+ if (!_conv(t->tm_yday + 1, 3, '0'))
+ return(0);
+ continue;
+ case 'k':
+ if (!_conv(t->tm_hour, 2, ' '))
+ return(0);
+ continue;
+ case 'l':
+ if (!_conv(t->tm_hour % 12 ?
+ t->tm_hour % 12: 12, 2, ' '))
+ return(0);
+ continue;
+ case 'M':
+ if (!_conv(t->tm_min, 2, '0'))
+ return(0);
+ continue;
+ case 'm':
+ if (!_conv(t->tm_mon + 1, 2, '0'))
+ return(0);
+ continue;
+ case 'n':
+ if (!_add("\n"))
+ return(0);
+ continue;
+ case 'p':
+ if (!_add(_CurrentTimeLocale->am_pm[t->tm_hour >= 12]))
+ return(0);
+ continue;
+ case 'R':
+ if (!_fmt("%H:%M", t))
+ return(0);
+ continue;
+ case 'r':
+ if (!_fmt(_CurrentTimeLocale->t_fmt_ampm, t))
+ return(0);
+ continue;
+ case 'S':
+ if (!_conv(t->tm_sec, 2, '0'))
+ return(0);
+ continue;
+ case 's':
+ if (!_secs(t))
+ return(0);
+ continue;
+ case 'T':
+ if (!_fmt("%H:%M:%S", t))
+ return(0);
+ continue;
+ case 't':
+ if (!_add("\t"))
+ return(0);
+ continue;
+ case 'U':
+ if (!_conv(SUN_WEEK(t), 2, '0'))
+ return(0);
+ continue;
+ case 'u':
+ if (!_conv(t->tm_wday ? t->tm_wday : 7, 1, '0'))
+ return(0);
+ continue;
+ case 'V':
+ {
+ int week = ISO8601Week( t, NULL );
+ if (!_conv(week, 2, '0'))
+ return(0);
+ continue;
+ }
+ case 'W':
+ if (!_conv(MON_WEEK(t), 2, '0'))
+ return(0);
+ continue;
+ case 'w':
+ if (!_conv(t->tm_wday, 1, '0'))
+ return(0);
+ continue;
+#ifdef __WIN32__
+ /*
+ * To properly handle the localized time routines on Windows,
+ * we must make use of the special localized calls.
+ */
+ case 'c':
+ if (!GetDateFormat(LOCALE_USER_DEFAULT, DATE_LONGDATE,
+ &syst, NULL, buf, BUF_SIZ) || !_add(buf)
+ || !_add(" ")) {
+ return(0);
+ }
+ /*
+ * %c is created with LONGDATE + " " + TIME on Windows,
+ * so continue to %X case here.
+ */
+ case 'X':
+ if (!GetTimeFormat(LOCALE_USER_DEFAULT, 0,
+ &syst, NULL, buf, BUF_SIZ) || !_add(buf)) {
+ return(0);
+ }
+ continue;
+ case 'x':
+ if (!GetDateFormat(LOCALE_USER_DEFAULT, DATE_SHORTDATE,
+ &syst, NULL, buf, BUF_SIZ) || !_add(buf)) {
+ return(0);
+ }
+ continue;
+#else
+ case 'c':
+ if (!_fmt(_CurrentTimeLocale->d_t_fmt, t))
+ return(0);
+ continue;
+ case 'x':
+ if (!_fmt(_CurrentTimeLocale->d_fmt, t))
+ return(0);
+ continue;
+ case 'X':
+ if (!_fmt(_CurrentTimeLocale->t_fmt, t))
+ return(0);
+ continue;
+#endif
+ case 'y':
+ if (!_conv((t->tm_year + TM_YEAR_BASE) % 100,
+ 2, '0'))
+ return(0);
+ continue;
+ case 'Y':
+ if (!_conv((t->tm_year + TM_YEAR_BASE), 4, '0'))
+ return(0);
+ continue;
+ case 'Z': {
+ char *name = (isGMT ? "GMT" : TclpGetTZName(t->tm_isdst));
+ if (name && !_add(name)) {
+ return 0;
+ }
+ continue;
+ }
+ case '%':
+ /*
+ * X311J/88-090 (4.12.3.5): if conversion char is
+ * undefined, behavior is undefined. Print out the
+ * character itself as printf(3) does.
+ */
+ default:
+ break;
+ }
+ }
+ if (!gsize--)
+ return(0);
+ *pt++ = *format;
+ }
+ return(gsize);
+}
+
+static int
+_secs(t)
+ CONST struct tm *t;
+{
+ static char buf[15];
+ register time_t s;
+ register char *p;
+ struct tm tmp;
+
+ /* Make a copy, mktime(3) modifies the tm struct. */
+ tmp = *t;
+ s = mktime(&tmp);
+ for (p = buf + sizeof(buf) - 2; s > 0 && p > buf; s /= 10)
+ *p-- = (char)(s % 10 + '0');
+ return(_add(++p));
+}
+
+static int
+_conv(n, digits, pad)
+ int n, digits;
+ int pad;
+{
+ static char buf[10];
+ register char *p;
+
+ p = buf + sizeof( buf ) - 1;
+ *p-- = '\0';
+ if ( n == 0 ) {
+ *p-- = '0';
+ } else {
+ for (; n > 0 && p > buf; n /= 10, --digits)
+ *p-- = (char)(n % 10 + '0');
+ }
+ while (p > buf && digits-- > 0)
+ *p-- = (char) pad;
+ return(_add(++p));
+}
+
+static int
+_add(str)
+ const char *str;
+{
+ for (;; ++pt, --gsize) {
+ if (!gsize)
+ return(0);
+ if (!(*pt = *str++))
+ return(1);
+ }
+}
+
+static int
+ISO8601Week( t, year )
+ CONST struct tm* t;
+ int* year;
+{
+ /* Find the day-of-year of the Thursday in
+ * the week in question. */
+
+ int ydayThursday;
+ int week;
+ if ( t->tm_wday == 0 ) {
+ ydayThursday = t->tm_yday - 3;
+ } else {
+ ydayThursday = t->tm_yday - t->tm_wday + 4;
+ }
+
+ if ( ydayThursday < 0 ) {
+
+ /* This is the last week of the previous year. */
+ if ( IsLeapYear(( t->tm_year + TM_YEAR_BASE - 1 )) ) {
+ ydayThursday += 366;
+ } else {
+ ydayThursday += 365;
+ }
+ week = ydayThursday / 7 + 1;
+ if ( year != NULL ) {
+ *year = t->tm_year + 1899;
+ }
+
+ } else if ( ( IsLeapYear(( t -> tm_year + TM_YEAR_BASE ))
+ && ydayThursday >= 366 )
+ || ( !IsLeapYear(( t -> tm_year
+ + TM_YEAR_BASE ))
+ && ydayThursday >= 365 ) ) {
+
+ /* This is week 1 of the following year */
+
+ week = 1;
+ if ( year != NULL ) {
+ *year = t->tm_year + 1901;
+ }
+
+ } else {
+
+ week = ydayThursday / 7 + 1;
+ if ( year != NULL ) {
+ *year = t->tm_year + 1900;
+ }
+
+ }
+
+ return week;
+
+}
diff --git a/compat/strtoll.c b/compat/strtoll.c
new file mode 100644
index 0000000..ce1c8a1
--- /dev/null
+++ b/compat/strtoll.c
@@ -0,0 +1,107 @@
+/*
+ * strtoll.c --
+ *
+ * Source code for the "strtoll" library procedure.
+ *
+ * Copyright (c) 1988 The Regents of the University of California.
+ * Copyright (c) 1994 Sun Microsystems, Inc.
+ *
+ * See the file "license.terms" for information on usage and redistribution of
+ * this file, and for a DISCLAIMER OF ALL WARRANTIES.
+ *
+ * RCS: @(#) $Id: strtoll.c,v 1.9 2007/04/16 13:36:34 dkf Exp $
+ */
+
+#include "tclInt.h"
+#include <ctype.h>
+
+#define TCL_WIDEINT_MAX (((Tcl_WideUInt)Tcl_LongAsWide(-1))>>1)
+
+
+/*
+ *----------------------------------------------------------------------
+ *
+ * strtoll --
+ *
+ * Convert an ASCII string into an integer.
+ *
+ * Results:
+ * The return value is the integer equivalent of string. If endPtr is
+ * non-NULL, then *endPtr is filled in with the character after the last
+ * one that was part of the integer. If string doesn't contain a valid
+ * integer value, then zero is returned and *endPtr is set to string.
+ *
+ * Side effects:
+ * None.
+ *
+ *----------------------------------------------------------------------
+ */
+
+#if TCL_WIDE_INT_IS_LONG
+long long
+#else
+Tcl_WideInt
+#endif
+strtoll(
+ CONST char *string, /* String of ASCII digits, possibly preceded
+ * by white space. For bases greater than 10,
+ * either lower- or upper-case digits may be
+ * used. */
+ char **endPtr, /* Where to store address of terminating
+ * character, or NULL. */
+ int base) /* Base for conversion. Must be less than 37.
+ * If 0, then the base is chosen from the
+ * leading characters of string: "0x" means
+ * hex, "0" means octal, anything else means
+ * decimal. */
+{
+ register CONST char *p;
+ Tcl_WideInt result = Tcl_LongAsWide(0);
+ Tcl_WideUInt uwResult;
+
+ /*
+ * Skip any leading blanks.
+ */
+
+ p = string;
+ while (isspace(UCHAR(*p))) {
+ p += 1;
+ }
+
+ /*
+ * Check for a sign.
+ */
+
+ errno = 0;
+ if (*p == '-') {
+ p += 1;
+ uwResult = strtoull(p, endPtr, base);
+ if (errno != ERANGE) {
+ if (uwResult > TCL_WIDEINT_MAX+1) {
+ errno = ERANGE;
+ return Tcl_LongAsWide(-1);
+ } else if (uwResult > TCL_WIDEINT_MAX) {
+ return ~((Tcl_WideInt)TCL_WIDEINT_MAX);
+ } else {
+ result = -((Tcl_WideInt) uwResult);
+ }
+ }
+ } else {
+ if (*p == '+') {
+ p += 1;
+ }
+ uwResult = strtoull(p, endPtr, base);
+ if (errno != ERANGE) {
+ if (uwResult > TCL_WIDEINT_MAX) {
+ errno = ERANGE;
+ return Tcl_LongAsWide(-1);
+ } else {
+ result = uwResult;
+ }
+ }
+ }
+ if ((result == 0) && (endPtr != 0) && (*endPtr == p)) {
+ *endPtr = (char *) string;
+ }
+ return result;
+}
diff --git a/compat/strtoull.c b/compat/strtoull.c
new file mode 100644
index 0000000..b31567f
--- /dev/null
+++ b/compat/strtoull.c
@@ -0,0 +1,255 @@
+/*
+ * strtoull.c --
+ *
+ * Source code for the "strtoull" library procedure.
+ *
+ * Copyright (c) 1988 The Regents of the University of California.
+ * Copyright (c) 1994 Sun Microsystems, Inc.
+ *
+ * See the file "license.terms" for information on usage and redistribution of
+ * this file, and for a DISCLAIMER OF ALL WARRANTIES.
+ *
+ * RCS: @(#) $Id: strtoull.c,v 1.9 2007/04/16 13:36:34 dkf Exp $
+ */
+
+#include "tclInt.h"
+#include <ctype.h>
+
+/*
+ * The table below is used to convert from ASCII digits to a numerical
+ * equivalent. It maps from '0' through 'z' to integers (100 for non-digit
+ * characters).
+ */
+
+static char cvtIn[] = {
+ 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, /* '0' - '9' */
+ 100, 100, 100, 100, 100, 100, 100, /* punctuation */
+ 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, /* 'A' - 'Z' */
+ 20, 21, 22, 23, 24, 25, 26, 27, 28, 29,
+ 30, 31, 32, 33, 34, 35,
+ 100, 100, 100, 100, 100, 100, /* punctuation */
+ 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, /* 'a' - 'z' */
+ 20, 21, 22, 23, 24, 25, 26, 27, 28, 29,
+ 30, 31, 32, 33, 34, 35};
+
+
+/*
+ *----------------------------------------------------------------------
+ *
+ * strtoull --
+ *
+ * Convert an ASCII string into an integer.
+ *
+ * Results:
+ * The return value is the integer equivalent of string. If endPtr is
+ * non-NULL, then *endPtr is filled in with the character after the last
+ * one that was part of the integer. If string doesn't contain a valid
+ * integer value, then zero is returned and *endPtr is set to string.
+ *
+ * Side effects:
+ * None.
+ *
+ *----------------------------------------------------------------------
+ */
+
+#if TCL_WIDE_INT_IS_LONG
+unsigned long long
+#else
+Tcl_WideUInt
+#endif
+strtoull(
+ CONST char *string, /* String of ASCII digits, possibly preceded
+ * by white space. For bases greater than 10,
+ * either lower- or upper-case digits may be
+ * used. */
+ char **endPtr, /* Where to store address of terminating
+ * character, or NULL. */
+ int base) /* Base for conversion. Must be less than 37.
+ * If 0, then the base is chosen from the
+ * leading characters of string: "0x" means
+ * hex, "0" means octal, anything else means
+ * decimal. */
+{
+ register CONST char *p;
+ register Tcl_WideUInt result = 0;
+ register unsigned digit;
+ register Tcl_WideUInt shifted;
+ int anyDigits = 0, negative = 0;
+
+ /*
+ * Skip any leading blanks.
+ */
+
+ p = string;
+ while (isspace(UCHAR(*p))) { /* INTL: locale-dependent */
+ p += 1;
+ }
+
+ /*
+ * Check for a sign.
+ */
+
+ if (*p == '-') {
+ p += 1;
+ negative = 1;
+ } else {
+ if (*p == '+') {
+ p += 1;
+ }
+ }
+
+ /*
+ * If no base was provided, pick one from the leading characters of the
+ * string.
+ */
+
+ if (base == 0) {
+ if (*p == '0') {
+ p += 1;
+ if (*p == 'x' || *p == 'X') {
+ p += 1;
+ base = 16;
+ } else {
+ /*
+ * Must set anyDigits here, otherwise "0" produces a "no
+ * digits" error.
+ */
+
+ anyDigits = 1;
+ base = 8;
+ }
+ } else {
+ base = 10;
+ }
+ } else if (base == 16) {
+ /*
+ * Skip a leading "0x" from hex numbers.
+ */
+
+ if ((p[0] == '0') && (p[1] == 'x' || *p == 'X')) {
+ p += 2;
+ }
+ }
+
+ /*
+ * Sorry this code is so messy, but speed seems important. Do different
+ * things for base 8, 10, 16, and other.
+ */
+
+ if (base == 8) {
+ for ( ; ; p += 1) {
+ digit = *p - '0';
+ if (digit > 7) {
+ break;
+ }
+ shifted = result << 3;
+ if ((shifted >> 3) != result) {
+ goto overflow;
+ }
+ result = shifted + digit;
+ if ( result < shifted ) {
+ goto overflow;
+ }
+ anyDigits = 1;
+ }
+ } else if (base == 10) {
+ for ( ; ; p += 1) {
+ digit = *p - '0';
+ if (digit > 9) {
+ break;
+ }
+ shifted = 10 * result;
+ if ((shifted / 10) != result) {
+ goto overflow;
+ }
+ result = shifted + digit;
+ if ( result < shifted ) {
+ goto overflow;
+ }
+ anyDigits = 1;
+ }
+ } else if (base == 16) {
+ for ( ; ; p += 1) {
+ digit = *p - '0';
+ if (digit > ('z' - '0')) {
+ break;
+ }
+ digit = cvtIn[digit];
+ if (digit > 15) {
+ break;
+ }
+ shifted = result << 4;
+ if ((shifted >> 4) != result) {
+ goto overflow;
+ }
+ result = shifted + digit;
+ if ( result < shifted ) {
+ goto overflow;
+ }
+ anyDigits = 1;
+ }
+ } else if ( base >= 2 && base <= 36 ) {
+ for ( ; ; p += 1) {
+ digit = *p - '0';
+ if (digit > ('z' - '0')) {
+ break;
+ }
+ digit = cvtIn[digit];
+ if (digit >= (unsigned) base) {
+ break;
+ }
+ shifted = result * base;
+ if ((shifted/base) != result) {
+ goto overflow;
+ }
+ result = shifted + digit;
+ if ( result < shifted ) {
+ goto overflow;
+ }
+ anyDigits = 1;
+ }
+ }
+
+ /*
+ * Negate if we found a '-' earlier.
+ */
+
+ if (negative) {
+ result = (Tcl_WideUInt)(-((Tcl_WideInt)result));
+ }
+
+ /*
+ * See if there were any digits at all.
+ */
+
+ if (!anyDigits) {
+ p = string;
+ }
+
+ if (endPtr != 0) {
+ *endPtr = (char *) p;
+ }
+
+ return result;
+
+ /*
+ * On overflow generate the right output
+ */
+
+ overflow:
+ errno = ERANGE;
+ if (endPtr != 0) {
+ for ( ; ; p += 1) {
+ digit = *p - '0';
+ if (digit > ('z' - '0')) {
+ break;
+ }
+ digit = cvtIn[digit];
+ if (digit >= (unsigned) base) {
+ break;
+ }
+ }
+ *endPtr = (char *) p;
+ }
+ return (Tcl_WideUInt)Tcl_LongAsWide(-1);
+}
diff --git a/compat/tclErrno.h b/compat/tclErrno.h
new file mode 100644
index 0000000..bcbc984
--- /dev/null
+++ b/compat/tclErrno.h
@@ -0,0 +1,99 @@
+/*
+ * tclErrno.h --
+ *
+ * This header file contains the various POSIX errno definitions that
+ * are used by Tcl. This file is derived from the spec POSIX 2.4 and
+ * previous implementations for Berkeley UNIX.
+ *
+ * Copyright (c) 1982, 1986, 1989 Regents of the University of California.
+ * Copyright (c) 1996 Sun Microsystems, Inc.
+ *
+ * See the file "license.terms" for information on usage and redistribution
+ * of this file, and for a DISCLAIMER OF ALL WARRANTIES.
+ *
+ * RCS: @(#) $Id: tclErrno.h,v 1.3 2002/06/07 08:50:22 dkf Exp $
+ */
+
+extern int errno; /* global error number */
+
+#define EPERM 1 /* Operation not permitted */
+#define ENOENT 2 /* No such file or directory */
+#define ESRCH 3 /* No such process */
+#define EINTR 4 /* Interrupted system call */
+#define EIO 5 /* Input/output error */
+#define ENXIO 6 /* Device not configured */
+#define E2BIG 7 /* Argument list too long */
+#define ENOEXEC 8 /* Exec format error */
+#define EBADF 9 /* Bad file descriptor */
+#define ECHILD 10 /* No child processes */
+#define EDEADLK 11 /* Resource deadlock avoided */
+ /* 11 was EAGAIN */
+#define ENOMEM 12 /* Cannot allocate memory */
+#define EACCES 13 /* Permission denied */
+#define EFAULT 14 /* Bad address */
+#define ENOTBLK 15 /* Block device required */
+#define EBUSY 16 /* Device busy */
+#define EEXIST 17 /* File exists */
+#define EXDEV 18 /* Cross-device link */
+#define ENODEV 19 /* Operation not supported by device */
+#define ENOTDIR 20 /* Not a directory */
+#define EISDIR 21 /* Is a directory */
+#define EINVAL 22 /* Invalid argument */
+#define ENFILE 23 /* Too many open files in system */
+#define EMFILE 24 /* Too many open files */
+#define ENOTTY 25 /* Inappropriate ioctl for device */
+#define ETXTBSY 26 /* Text file busy */
+#define EFBIG 27 /* File too large */
+#define ENOSPC 28 /* No space left on device */
+#define ESPIPE 29 /* Illegal seek */
+#define EROFS 30 /* Read-only file system */
+#define EMLINK 31 /* Too many links */
+#define EPIPE 32 /* Broken pipe */
+#define EDOM 33 /* Numerical argument out of domain */
+#define ERANGE 34 /* Result too large */
+#define EAGAIN 35 /* Resource temporarily unavailable */
+#define EWOULDBLOCK EAGAIN /* Operation would block */
+#define EINPROGRESS 36 /* Operation now in progress */
+#define EALREADY 37 /* Operation already in progress */
+#define ENOTSOCK 38 /* Socket operation on non-socket */
+#define EDESTADDRREQ 39 /* Destination address required */
+#define EMSGSIZE 40 /* Message too long */
+#define EPROTOTYPE 41 /* Protocol wrong type for socket */
+#define ENOPROTOOPT 42 /* Protocol not available */
+#define EPROTONOSUPPORT 43 /* Protocol not supported */
+#define ESOCKTNOSUPPORT 44 /* Socket type not supported */
+#define EOPNOTSUPP 45 /* Operation not supported on socket */
+#define EPFNOSUPPORT 46 /* Protocol family not supported */
+#define EAFNOSUPPORT 47 /* Address family not supported by protocol family */
+#define EADDRINUSE 48 /* Address already in use */
+#define EADDRNOTAVAIL 49 /* Can't assign requested address */
+#define ENETDOWN 50 /* Network is down */
+#define ENETUNREACH 51 /* Network is unreachable */
+#define ENETRESET 52 /* Network dropped connection on reset */
+#define ECONNABORTED 53 /* Software caused connection abort */
+#define ECONNRESET 54 /* Connection reset by peer */
+#define ENOBUFS 55 /* No buffer space available */
+#define EISCONN 56 /* Socket is already connected */
+#define ENOTCONN 57 /* Socket is not connected */
+#define ESHUTDOWN 58 /* Can't send after socket shutdown */
+#define ETOOMANYREFS 59 /* Too many references: can't splice */
+#define ETIMEDOUT 60 /* Connection timed out */
+#define ECONNREFUSED 61 /* Connection refused */
+#define ELOOP 62 /* Too many levels of symbolic links */
+#define ENAMETOOLONG 63 /* File name too long */
+#define EHOSTDOWN 64 /* Host is down */
+#define EHOSTUNREACH 65 /* No route to host */
+#define ENOTEMPTY 66 /* Directory not empty */
+#define EPROCLIM 67 /* Too many processes */
+#define EUSERS 68 /* Too many users */
+#define EDQUOT 69 /* Disc quota exceeded */
+#define ESTALE 70 /* Stale NFS file handle */
+#define EREMOTE 71 /* Too many levels of remote in path */
+#define EBADRPC 72 /* RPC struct is bad */
+#define ERPCMISMATCH 73 /* RPC version wrong */
+#define EPROGUNAVAIL 74 /* RPC prog. not avail */
+#define EPROGMISMATCH 75 /* Program version wrong */
+#define EPROCUNAVAIL 76 /* Bad procedure for program */
+#define ENOLCK 77 /* No locks available */
+#define ENOSYS 78 /* Function not implemented */
+#define EOVERFLOW 79 /* Value too large to be stored in data type */
diff --git a/compat/tmpnam.c b/compat/tmpnam.c
new file mode 100644
index 0000000..6faf8de
--- /dev/null
+++ b/compat/tmpnam.c
@@ -0,0 +1,42 @@
+/*
+ * Copyright (c) 1988 Regents of the University of California.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms are permitted provided
+ * that this notice is preserved and that due credit is given to the
+ * University of California at Berkeley. The name of the University may not be
+ * used to endorse or promote products derived from this software without
+ * specific written prior permission. This software is provided ``as is''
+ * without express or implied warranty.
+ *
+ * RCS: @(#) $Id: tmpnam.c,v 1.3 2007/04/16 13:36:34 dkf Exp $
+ */
+
+#include <sys/param.h>
+#include <sys/stat.h>
+#include <sys/file.h>
+#include <stdio.h>
+
+/*
+ * Use /tmp instead of /usr/tmp, because L_tmpname is only 14 chars on some
+ * machines (like NeXT machines) and /usr/tmp will cause buffer overflows.
+ */
+
+#ifdef P_tmpdir
+# undef P_tmpdir
+#endif
+#define P_tmpdir "/tmp"
+
+char *
+tmpnam(
+ char *s)
+{
+ static char name[50];
+ char *mktemp(char *);
+
+ if (!s) {
+ s = name;
+ }
+ (void) sprintf(s, "%s/XXXXXX", P_tmpdir);
+ return mktemp(s);
+}
diff --git a/compat/unicows/license.txt b/compat/unicows/license.txt
new file mode 100644
index 0000000..46f4d0b
--- /dev/null
+++ b/compat/unicows/license.txt
@@ -0,0 +1,19 @@
+Copyright (c) 2001-2008 Vaclav Slavik
+
+Permission is hereby granted, free of charge, to any person obtaining a copy of
+this software and associated documentation files (the "Software"), to deal in
+the Software without restriction, including without limitation the rights to
+use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+the Software, and to permit persons to whom the Software is furnished to do so,
+subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ \ No newline at end of file
diff --git a/compat/unicows/readme.txt b/compat/unicows/readme.txt
new file mode 100644
index 0000000..00967fc
--- /dev/null
+++ b/compat/unicows/readme.txt
@@ -0,0 +1,163 @@
+
+
+ =============================================
+ libunicows
+ -------------------------------------
+ Import library for
+ Microsoft Layer for Unicode (unicows.dll)
+
+ http://libunicows.sourceforge.net
+ =============================================
+
+
+ About
+=======
+
+Traditionally, win32 Unicode API was only available on Windows NT or 2000. If
+you wanted to take advantage of Unicode in your application and support Windows
+95/98 at the same time, your only option was to deploy two executables, one for
+NT and one for 9X.
+
+Fortunately, this changed in 2001 when MS (finally!) released MSLU runtime that
+allows Unicode applications to run under Windows 9X.
+
+See these pages for details:
+
+ http://www.microsoft.com/globaldev/handson/dev/mslu_announce.mspx
+ http://msdn.microsoft.com/msdnmag/nettop.asp?page=/msdnmag/issues/01/10/MSLU/MSLU.asp&ad=ads.ddj.com/msdnmag/premium.htm
+
+Less fortunately, this solution requires that you use a special statically
+linked import library that decides at runtime whether to load symbols from
+system libraries like kernel32.dll or user32.dll (in case of Windows NT) or
+from unicows.dll (which provides Unicode emulation layer under 9X). This import
+library is only available for Microsoft Visual C++ and is only part of the new
+Platform SDK, which is rather huge package.
+
+This library contains independent implementation of the import library. It can
+be used with any C compiler (although it was only tested with Mingw32 and MSVC
+so far).
+
+
+
+ Installing libunicows
+=======================
+
+ Mingw32
+---------
+
+Simply copy libunicows.a to the lib subdirectory of your Mingw32 installation
+(e.g. c:\mingw32\lib).
+
+
+ Microsoft Visual C++
+----------------------
+
+Copy unicows.lib to C:\Program Files\Visual Studio\VC98\Lib (assuming you
+installed MSVC into C:\Program Files\Visual Studio and that you have version
+6.0, the path may vary otherwise).
+
+Note: This was tested only with MSVC++ 6.0, but should work with other versions
+ as well.
+
+
+ Borland C++
+-------------
+
+Copy unicows.lib to %BORLAND%\lib where %BORLAND% is where you installed BC++
+(this directory should contain import32.lib).
+
+
+ Watcom C/C++
+-------------
+
+Copy unicows.lib to %WATCOM%\lib386\nt where %WATCOM% is where you installed
+the compiler.
+
+
+ Usage
+=======
+
+1) Add the unicows import library BEFORE other win32 libraries on your command
+line. For example, if your command line for Mingw32 was
+
+ c++ foo.o bar.o -o foo -lkernel32 -luser32 -lgdi32 -lcomdlg32
+
+change it to
+
+ c++ foo.o bar.o -o foo -lunicows -lkernel32 -luser32 -lgdi32 -lcomdlg32
+
+No other change is neccessary, you don't have to include any special headers in
+your source files.
+
+
+2) Download Unicows runtime from
+
+ http://www.microsoft.com/downloads/release.asp?releaseid=30039
+
+or
+
+ http://download.microsoft.com/download/platformsdk/Redist/1.0/W9XMe/EN-US/unicows.exe
+
+Extract unicows.dll from the package and distribute it with your application.
+Do *not* install it to Windows system directory, always copy the DLL to your
+application's directory! (Nobody wants any more of DLL hell...).
+
+If your application uses Common Controls DLL (very likely) or Rich Edit control,
+make sure the installer installs new enough versions that fully support Unicode
+(Common Controls DLL version 5.80 and RichEdit 4.0).
+
+
+ Compiling from sources
+========================
+
+1) Download the source package (libunicows-$version-src.tar.gz)
+
+2) [optional step] Run generate.py to create assembler stubs. You will need
+ Python (http://www.python.org) to run it. You don't have to do this unless
+ you modified symbols.txt or src\template.asm, because generated stubs are
+ already included in source package (in src\gen_asm).
+
+3) Change to 'src' subdirectory and compile the library. You will need
+ NASM (http://nasm.sourceforge.net).
+
+ Mingw32: run make -f makefile.mingw32
+ MSVC: run nmake -f makefile.vc6
+
+ If your compiler is not supported, you will have to create a makefile/project
+ file for it. You can gen inspiration from existing makefiles. If you do so,
+ please send the makefile (and if possible, compiled unicows.lib) to me,
+ so that I can include it in the next release of libunicows. Thanks!
+
+
+ Compiling and using unicows_wrapper.dll
+=========================================
+
+If precompiled version of libunicows is not available for your compiler, you
+can use unicows_wrapper.dll (at the cost of marginally slower calls and
+the need to install unicows_wrapper.dll on NT/2k/XP boxes, too). Create
+an import library for it in the same way you would do for any other DLL
+and same the created import library as unicows.lib (or whatever name convention
+your compiler uses, the point is to not name it unicows_wrapper.lib). For
+example, this is how to do it with Borland C++ tools:
+
+ implib unicows.lib unicows_wrapper.dll
+
+That is. Use the library as with other compilers, i.e. put unicows.lib as the
+first one on your command line, so that the symbols are found in unicows.lib
+and not in e.g. kernel32.lib.
+
+Unlike with the "native" import libraries, using unicows_wrapper.dll will make
+your application depend on unicows_wrapper.dll even when installed on
+Windows NT/2000/XP. Therefore, your installer must install following files
+in addition to your application's binary and data:
+
+9x/ME: unicows.dll, unicows_wrapper.dll
+NT/2k/XP: unicows_wrapper.dll
+
+
+
+ Contacting the author
+=======================
+
+I can be reached at this email address: vslavik@fastmail.fm
+ \ No newline at end of file
diff --git a/compat/unicows/unicows.lib b/compat/unicows/unicows.lib
new file mode 100644
index 0000000..e130334
--- /dev/null
+++ b/compat/unicows/unicows.lib
Binary files differ
diff --git a/compat/zlib/algorithm.txt b/compat/zlib/algorithm.txt
new file mode 100644
index 0000000..b022dde
--- /dev/null
+++ b/compat/zlib/algorithm.txt
@@ -0,0 +1,209 @@
+1. Compression algorithm (deflate)
+
+The deflation algorithm used by gzip (also zip and zlib) is a variation of
+LZ77 (Lempel-Ziv 1977, see reference below). It finds duplicated strings in
+the input data. The second occurrence of a string is replaced by a
+pointer to the previous string, in the form of a pair (distance,
+length). Distances are limited to 32K bytes, and lengths are limited
+to 258 bytes. When a string does not occur anywhere in the previous
+32K bytes, it is emitted as a sequence of literal bytes. (In this
+description, `string' must be taken as an arbitrary sequence of bytes,
+and is not restricted to printable characters.)
+
+Literals or match lengths are compressed with one Huffman tree, and
+match distances are compressed with another tree. The trees are stored
+in a compact form at the start of each block. The blocks can have any
+size (except that the compressed data for one block must fit in
+available memory). A block is terminated when deflate() determines that
+it would be useful to start another block with fresh trees. (This is
+somewhat similar to the behavior of LZW-based _compress_.)
+
+Duplicated strings are found using a hash table. All input strings of
+length 3 are inserted in the hash table. A hash index is computed for
+the next 3 bytes. If the hash chain for this index is not empty, all
+strings in the chain are compared with the current input string, and
+the longest match is selected.
+
+The hash chains are searched starting with the most recent strings, to
+favor small distances and thus take advantage of the Huffman encoding.
+The hash chains are singly linked. There are no deletions from the
+hash chains, the algorithm simply discards matches that are too old.
+
+To avoid a worst-case situation, very long hash chains are arbitrarily
+truncated at a certain length, determined by a runtime option (level
+parameter of deflateInit). So deflate() does not always find the longest
+possible match but generally finds a match which is long enough.
+
+deflate() also defers the selection of matches with a lazy evaluation
+mechanism. After a match of length N has been found, deflate() searches for
+a longer match at the next input byte. If a longer match is found, the
+previous match is truncated to a length of one (thus producing a single
+literal byte) and the process of lazy evaluation begins again. Otherwise,
+the original match is kept, and the next match search is attempted only N
+steps later.
+
+The lazy match evaluation is also subject to a runtime parameter. If
+the current match is long enough, deflate() reduces the search for a longer
+match, thus speeding up the whole process. If compression ratio is more
+important than speed, deflate() attempts a complete second search even if
+the first match is already long enough.
+
+The lazy match evaluation is not performed for the fastest compression
+modes (level parameter 1 to 3). For these fast modes, new strings
+are inserted in the hash table only when no match was found, or
+when the match is not too long. This degrades the compression ratio
+but saves time since there are both fewer insertions and fewer searches.
+
+
+2. Decompression algorithm (inflate)
+
+2.1 Introduction
+
+The key question is how to represent a Huffman code (or any prefix code) so
+that you can decode fast. The most important characteristic is that shorter
+codes are much more common than longer codes, so pay attention to decoding the
+short codes fast, and let the long codes take longer to decode.
+
+inflate() sets up a first level table that covers some number of bits of
+input less than the length of longest code. It gets that many bits from the
+stream, and looks it up in the table. The table will tell if the next
+code is that many bits or less and how many, and if it is, it will tell
+the value, else it will point to the next level table for which inflate()
+grabs more bits and tries to decode a longer code.
+
+How many bits to make the first lookup is a tradeoff between the time it
+takes to decode and the time it takes to build the table. If building the
+table took no time (and if you had infinite memory), then there would only
+be a first level table to cover all the way to the longest code. However,
+building the table ends up taking a lot longer for more bits since short
+codes are replicated many times in such a table. What inflate() does is
+simply to make the number of bits in the first table a variable, and then
+to set that variable for the maximum speed.
+
+For inflate, which has 286 possible codes for the literal/length tree, the size
+of the first table is nine bits. Also the distance trees have 30 possible
+values, and the size of the first table is six bits. Note that for each of
+those cases, the table ended up one bit longer than the ``average'' code
+length, i.e. the code length of an approximately flat code which would be a
+little more than eight bits for 286 symbols and a little less than five bits
+for 30 symbols.
+
+
+2.2 More details on the inflate table lookup
+
+Ok, you want to know what this cleverly obfuscated inflate tree actually
+looks like. You are correct that it's not a Huffman tree. It is simply a
+lookup table for the first, let's say, nine bits of a Huffman symbol. The
+symbol could be as short as one bit or as long as 15 bits. If a particular
+symbol is shorter than nine bits, then that symbol's translation is duplicated
+in all those entries that start with that symbol's bits. For example, if the
+symbol is four bits, then it's duplicated 32 times in a nine-bit table. If a
+symbol is nine bits long, it appears in the table once.
+
+If the symbol is longer than nine bits, then that entry in the table points
+to another similar table for the remaining bits. Again, there are duplicated
+entries as needed. The idea is that most of the time the symbol will be short
+and there will only be one table look up. (That's whole idea behind data
+compression in the first place.) For the less frequent long symbols, there
+will be two lookups. If you had a compression method with really long
+symbols, you could have as many levels of lookups as is efficient. For
+inflate, two is enough.
+
+So a table entry either points to another table (in which case nine bits in
+the above example are gobbled), or it contains the translation for the symbol
+and the number of bits to gobble. Then you start again with the next
+ungobbled bit.
+
+You may wonder: why not just have one lookup table for how ever many bits the
+longest symbol is? The reason is that if you do that, you end up spending
+more time filling in duplicate symbol entries than you do actually decoding.
+At least for deflate's output that generates new trees every several 10's of
+kbytes. You can imagine that filling in a 2^15 entry table for a 15-bit code
+would take too long if you're only decoding several thousand symbols. At the
+other extreme, you could make a new table for every bit in the code. In fact,
+that's essentially a Huffman tree. But then you spend two much time
+traversing the tree while decoding, even for short symbols.
+
+So the number of bits for the first lookup table is a trade of the time to
+fill out the table vs. the time spent looking at the second level and above of
+the table.
+
+Here is an example, scaled down:
+
+The code being decoded, with 10 symbols, from 1 to 6 bits long:
+
+A: 0
+B: 10
+C: 1100
+D: 11010
+E: 11011
+F: 11100
+G: 11101
+H: 11110
+I: 111110
+J: 111111
+
+Let's make the first table three bits long (eight entries):
+
+000: A,1
+001: A,1
+010: A,1
+011: A,1
+100: B,2
+101: B,2
+110: -> table X (gobble 3 bits)
+111: -> table Y (gobble 3 bits)
+
+Each entry is what the bits decode as and how many bits that is, i.e. how
+many bits to gobble. Or the entry points to another table, with the number of
+bits to gobble implicit in the size of the table.
+
+Table X is two bits long since the longest code starting with 110 is five bits
+long:
+
+00: C,1
+01: C,1
+10: D,2
+11: E,2
+
+Table Y is three bits long since the longest code starting with 111 is six
+bits long:
+
+000: F,2
+001: F,2
+010: G,2
+011: G,2
+100: H,2
+101: H,2
+110: I,3
+111: J,3
+
+So what we have here are three tables with a total of 20 entries that had to
+be constructed. That's compared to 64 entries for a single table. Or
+compared to 16 entries for a Huffman tree (six two entry tables and one four
+entry table). Assuming that the code ideally represents the probability of
+the symbols, it takes on the average 1.25 lookups per symbol. That's compared
+to one lookup for the single table, or 1.66 lookups per symbol for the
+Huffman tree.
+
+There, I think that gives you a picture of what's going on. For inflate, the
+meaning of a particular symbol is often more than just a letter. It can be a
+byte (a "literal"), or it can be either a length or a distance which
+indicates a base value and a number of bits to fetch after the code that is
+added to the base value. Or it might be the special end-of-block code. The
+data structures created in inftrees.c try to encode all that information
+compactly in the tables.
+
+
+Jean-loup Gailly Mark Adler
+jloup@gzip.org madler@alumni.caltech.edu
+
+
+References:
+
+[LZ77] Ziv J., Lempel A., ``A Universal Algorithm for Sequential Data
+Compression,'' IEEE Transactions on Information Theory, Vol. 23, No. 3,
+pp. 337-343.
+
+``DEFLATE Compressed Data Format Specification'' available in
+http://www.ietf.org/rfc/rfc1951.txt
diff --git a/compat/zlib/as400/bndsrc b/compat/zlib/as400/bndsrc
new file mode 100644
index 0000000..9cf94bb
--- /dev/null
+++ b/compat/zlib/as400/bndsrc
@@ -0,0 +1,132 @@
+STRPGMEXP PGMLVL(*CURRENT) SIGNATURE('ZLIB')
+
+/*@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@*/
+/* Version 1.1.3 entry points. */
+/*@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@*/
+
+/********************************************************************/
+/* *MODULE ADLER32 ZLIB 01/02/01 00:15:09 */
+/********************************************************************/
+
+ EXPORT SYMBOL("adler32")
+
+/********************************************************************/
+/* *MODULE COMPRESS ZLIB 01/02/01 00:15:09 */
+/********************************************************************/
+
+ EXPORT SYMBOL("compress")
+ EXPORT SYMBOL("compress2")
+
+/********************************************************************/
+/* *MODULE CRC32 ZLIB 01/02/01 00:15:09 */
+/********************************************************************/
+
+ EXPORT SYMBOL("crc32")
+ EXPORT SYMBOL("get_crc_table")
+
+/********************************************************************/
+/* *MODULE DEFLATE ZLIB 01/02/01 00:15:09 */
+/********************************************************************/
+
+ EXPORT SYMBOL("deflate")
+ EXPORT SYMBOL("deflateEnd")
+ EXPORT SYMBOL("deflateSetDictionary")
+ EXPORT SYMBOL("deflateCopy")
+ EXPORT SYMBOL("deflateReset")
+ EXPORT SYMBOL("deflateParams")
+ EXPORT SYMBOL("deflatePrime")
+ EXPORT SYMBOL("deflateInit_")
+ EXPORT SYMBOL("deflateInit2_")
+
+/********************************************************************/
+/* *MODULE GZIO ZLIB 01/02/01 00:15:09 */
+/********************************************************************/
+
+ EXPORT SYMBOL("gzopen")
+ EXPORT SYMBOL("gzdopen")
+ EXPORT SYMBOL("gzsetparams")
+ EXPORT SYMBOL("gzread")
+ EXPORT SYMBOL("gzwrite")
+ EXPORT SYMBOL("gzprintf")
+ EXPORT SYMBOL("gzputs")
+ EXPORT SYMBOL("gzgets")
+ EXPORT SYMBOL("gzputc")
+ EXPORT SYMBOL("gzgetc")
+ EXPORT SYMBOL("gzflush")
+ EXPORT SYMBOL("gzseek")
+ EXPORT SYMBOL("gzrewind")
+ EXPORT SYMBOL("gztell")
+ EXPORT SYMBOL("gzeof")
+ EXPORT SYMBOL("gzclose")
+ EXPORT SYMBOL("gzerror")
+
+/********************************************************************/
+/* *MODULE INFLATE ZLIB 01/02/01 00:15:09 */
+/********************************************************************/
+
+ EXPORT SYMBOL("inflate")
+ EXPORT SYMBOL("inflateEnd")
+ EXPORT SYMBOL("inflateSetDictionary")
+ EXPORT SYMBOL("inflateSync")
+ EXPORT SYMBOL("inflateReset")
+ EXPORT SYMBOL("inflateInit_")
+ EXPORT SYMBOL("inflateInit2_")
+ EXPORT SYMBOL("inflateSyncPoint")
+
+/********************************************************************/
+/* *MODULE UNCOMPR ZLIB 01/02/01 00:15:09 */
+/********************************************************************/
+
+ EXPORT SYMBOL("uncompress")
+
+/********************************************************************/
+/* *MODULE ZUTIL ZLIB 01/02/01 00:15:09 */
+/********************************************************************/
+
+ EXPORT SYMBOL("zlibVersion")
+ EXPORT SYMBOL("zError")
+
+/*@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@*/
+/* Version 1.2.1 additional entry points. */
+/*@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@*/
+
+/********************************************************************/
+/* *MODULE COMPRESS ZLIB 01/02/01 00:15:09 */
+/********************************************************************/
+
+ EXPORT SYMBOL("compressBound")
+
+/********************************************************************/
+/* *MODULE DEFLATE ZLIB 01/02/01 00:15:09 */
+/********************************************************************/
+
+ EXPORT SYMBOL("deflateBound")
+
+/********************************************************************/
+/* *MODULE GZIO ZLIB 01/02/01 00:15:09 */
+/********************************************************************/
+
+ EXPORT SYMBOL("gzungetc")
+ EXPORT SYMBOL("gzclearerr")
+
+/********************************************************************/
+/* *MODULE INFBACK ZLIB 01/02/01 00:15:09 */
+/********************************************************************/
+
+ EXPORT SYMBOL("inflateBack")
+ EXPORT SYMBOL("inflateBackEnd")
+ EXPORT SYMBOL("inflateBackInit_")
+
+/********************************************************************/
+/* *MODULE INFLATE ZLIB 01/02/01 00:15:09 */
+/********************************************************************/
+
+ EXPORT SYMBOL("inflateCopy")
+
+/********************************************************************/
+/* *MODULE ZUTIL ZLIB 01/02/01 00:15:09 */
+/********************************************************************/
+
+ EXPORT SYMBOL("zlibCompileFlags")
+
+ENDPGMEXP
diff --git a/compat/zlib/as400/compile.clp b/compat/zlib/as400/compile.clp
new file mode 100644
index 0000000..8554951
--- /dev/null
+++ b/compat/zlib/as400/compile.clp
@@ -0,0 +1,123 @@
+/******************************************************************************/
+/* */
+/* ZLIB */
+/* */
+/* Compile sources into modules and link them into a service program. */
+/* */
+/******************************************************************************/
+
+ PGM
+
+/* Configuration adjustable parameters. */
+
+ DCL VAR(&SRCLIB) TYPE(*CHAR) LEN(10) +
+ VALUE('ZLIB') /* Source library. */
+ DCL VAR(&SRCFILE) TYPE(*CHAR) LEN(10) +
+ VALUE('SOURCES') /* Source member file. */
+ DCL VAR(&CTLFILE) TYPE(*CHAR) LEN(10) +
+ VALUE('TOOLS') /* Control member file. */
+
+ DCL VAR(&MODLIB) TYPE(*CHAR) LEN(10) +
+ VALUE('ZLIB') /* Module library. */
+
+ DCL VAR(&SRVLIB) TYPE(*CHAR) LEN(10) +
+ VALUE('LGPL') /* Service program library. */
+
+ DCL VAR(&CFLAGS) TYPE(*CHAR) +
+ VALUE('OPTIMIZE(40)') /* Compile options. */
+
+
+/* Working storage. */
+
+ DCL VAR(&CMDLEN) TYPE(*DEC) LEN(15 5) VALUE(300) /* Command length. */
+ DCL VAR(&CMD) TYPE(*CHAR) LEN(512)
+
+
+/* Compile sources into modules. */
+
+ CHGVAR VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT +
+ '/ADLER32) SRCFILE(' *TCAT +
+ &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT +
+ ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
+ CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+ CHGVAR VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT +
+ '/COMPRESS) SRCFILE(' *TCAT +
+ &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT +
+ ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
+ CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+ CHGVAR VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT +
+ '/CRC32) SRCFILE(' *TCAT +
+ &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT +
+ ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
+ CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+ CHGVAR VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT +
+ '/DEFLATE) SRCFILE(' *TCAT +
+ &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT +
+ ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
+ CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+ CHGVAR VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT +
+ '/GZIO) SRCFILE(' *TCAT +
+ &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT +
+ ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
+ CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+ CHGVAR VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT +
+ '/INFBACK) SRCFILE(' *TCAT +
+ &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT +
+ ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
+ CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+ CHGVAR VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT +
+ '/INFFAST) SRCFILE(' *TCAT +
+ &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT +
+ ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
+ CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+ CHGVAR VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT +
+ '/INFLATE) SRCFILE(' *TCAT +
+ &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT +
+ ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
+ CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+ CHGVAR VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT +
+ '/INFTREES) SRCFILE(' *TCAT +
+ &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT +
+ ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
+ CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+ CHGVAR VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT +
+ '/TREES) SRCFILE(' *TCAT +
+ &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT +
+ ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
+ CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+ CHGVAR VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT +
+ '/UNCOMPR) SRCFILE(' *TCAT +
+ &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT +
+ ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
+ CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+ CHGVAR VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT +
+ '/ZUTIL) SRCFILE(' *TCAT +
+ &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT +
+ ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
+ CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+
+/* Link modules into a service program. */
+
+ CRTSRVPGM SRVPGM(&SRVLIB/ZLIB) +
+ MODULE(&MODLIB/ADLER32 &MODLIB/COMPRESS +
+ &MODLIB/CRC32 &MODLIB/DEFLATE +
+ &MODLIB/GZIO &MODLIB/INFBACK +
+ &MODLIB/INFFAST &MODLIB/INFLATE +
+ &MODLIB/INFTREES &MODLIB/TREES +
+ &MODLIB/UNCOMPR &MODLIB/ZUTIL) +
+ SRCFILE(&SRCLIB/&CTLFILE) SRCMBR(BNDSRC) +
+ TEXT('ZLIB 1.2.3') TGTRLS(V4R4M0)
+
+ ENDPGM
diff --git a/compat/zlib/as400/readme.txt b/compat/zlib/as400/readme.txt
new file mode 100644
index 0000000..beae13f
--- /dev/null
+++ b/compat/zlib/as400/readme.txt
@@ -0,0 +1,111 @@
+ ZLIB version 1.2.3 for AS400 installation instructions
+
+I) From an AS400 *SAVF file:
+
+1) Unpacking archive to an AS400 save file
+
+On the AS400:
+
+_ Create the ZLIB AS400 library:
+
+ CRTLIB LIB(ZLIB) TYPE(PROD) TEXT('ZLIB compression API library')
+
+_ Create a work save file, for example:
+
+ CRTSAVF FILE(ZLIB/ZLIBSAVF)
+
+On a PC connected to the target AS400:
+
+_ Unpack the save file image to a PC file "ZLIBSAVF"
+_ Upload this file into the save file on the AS400, for example
+ using ftp in BINARY mode.
+
+
+2) Populating the ZLIB AS400 source library
+
+On the AS400:
+
+_ Extract the saved objects into the ZLIB AS400 library using:
+
+RSTOBJ OBJ(*ALL) SAVLIB(ZLIB) DEV(*SAVF) SAVF(ZLIB/ZLIBSAVF) RSTLIB(ZLIB)
+
+
+3) Customize installation:
+
+_ Edit CL member ZLIB/TOOLS(COMPILE) and change parameters if needed,
+ according to the comments.
+
+_ Compile this member with:
+
+ CRTCLPGM PGM(ZLIB/COMPILE) SRCFILE(ZLIB/TOOLS) SRCMBR(COMPILE)
+
+
+4) Compile and generate the service program:
+
+_ This can now be done by executing:
+
+ CALL PGM(ZLIB/COMPILE)
+
+
+
+II) From the original source distribution:
+
+1) On the AS400, create the source library:
+
+ CRTLIB LIB(ZLIB) TYPE(PROD) TEXT('ZLIB compression API library')
+
+2) Create the source files:
+
+ CRTSRCPF FILE(ZLIB/SOURCES) RCDLEN(112) TEXT('ZLIB library modules')
+ CRTSRCPF FILE(ZLIB/H) RCDLEN(112) TEXT('ZLIB library includes')
+ CRTSRCPF FILE(ZLIB/TOOLS) RCDLEN(112) TEXT('ZLIB library control utilities')
+
+3) From the machine hosting the distribution files, upload them (with
+ FTP in text mode, for example) according to the following table:
+
+ Original AS400 AS400 AS400 AS400
+ file file member type description
+ SOURCES Original ZLIB C subprogram sources
+ adler32.c ADLER32 C ZLIB - Compute the Adler-32 checksum of a dta strm
+ compress.c COMPRESS C ZLIB - Compress a memory buffer
+ crc32.c CRC32 C ZLIB - Compute the CRC-32 of a data stream
+ deflate.c DEFLATE C ZLIB - Compress data using the deflation algorithm
+ gzio.c GZIO C ZLIB - IO on .gz files
+ infback.c INFBACK C ZLIB - Inflate using a callback interface
+ inffast.c INFFAST C ZLIB - Fast proc. literals & length/distance pairs
+ inflate.c INFLATE C ZLIB - Interface to inflate modules
+ inftrees.c INFTREES C ZLIB - Generate Huffman trees for efficient decode
+ trees.c TREES C ZLIB - Output deflated data using Huffman coding
+ uncompr.c UNCOMPR C ZLIB - Decompress a memory buffer
+ zutil.c ZUTIL C ZLIB - Target dependent utility functions
+ H Original ZLIB C and ILE/RPG include files
+ crc32.h CRC32 C ZLIB - CRC32 tables
+ deflate.h DEFLATE C ZLIB - Internal compression state
+ inffast.h INFFAST C ZLIB - Header to use inffast.c
+ inffixed.h INFFIXED C ZLIB - Table for decoding fixed codes
+ inflate.h INFLATE C ZLIB - Internal inflate state definitions
+ inftrees.h INFTREES C ZLIB - Header to use inftrees.c
+ trees.h TREES C ZLIB - Created automatically with -DGEN_TREES_H
+ zconf.h ZCONF C ZLIB - Compression library configuration
+ zlib.h ZLIB C ZLIB - Compression library C user interface
+ as400/zlib.inc ZLIB.INC RPGLE ZLIB - Compression library ILE RPG user interface
+ zutil.h ZUTIL C ZLIB - Internal interface and configuration
+ TOOLS Building source software & AS/400 README
+ as400/bndsrc BNDSRC Entry point exportation list
+ as400/compile.clp COMPILE CLP Compile sources & generate service program
+ as400/readme.txt README TXT Installation instructions
+
+4) Continue as in I)3).
+
+
+
+
+Notes: For AS400 ILE RPG programmers, a /copy member defining the ZLIB
+ API prototypes for ILE RPG can be found in ZLIB/H(ZLIB.INC).
+ Please read comments in this member for more information.
+
+ Remember that most foreign textual data are ASCII coded: this
+ implementation does not handle conversion from/to ASCII, so
+ text data code conversions must be done explicitely.
+
+ Always open zipped files in binary mode.
diff --git a/compat/zlib/as400/zlib.inc b/compat/zlib/as400/zlib.inc
new file mode 100644
index 0000000..7bbfb7e
--- /dev/null
+++ b/compat/zlib/as400/zlib.inc
@@ -0,0 +1,331 @@
+ * ZLIB.INC - Interface to the general purpose compression library
+ *
+ * ILE RPG400 version by Patrick Monnerat, DATASPHERE.
+ * Version 1.2.3
+ *
+ *
+ * WARNING:
+ * Procedures inflateInit(), inflateInit2(), deflateInit(),
+ * deflateInit2() and inflateBackInit() need to be called with
+ * two additional arguments:
+ * the package version string and the stream control structure.
+ * size. This is needed because RPG lacks some macro feature.
+ * Call these procedures as:
+ * inflateInit(...: ZLIB_VERSION: %size(z_stream))
+ *
+ /if not defined(ZLIB_H_)
+ /define ZLIB_H_
+ *
+ **************************************************************************
+ * Constants
+ **************************************************************************
+ *
+ * Versioning information.
+ *
+ D ZLIB_VERSION C '1.2.3'
+ D ZLIB_VERNUM C X'1230'
+ *
+ * Other equates.
+ *
+ D Z_NO_FLUSH C 0
+ D Z_SYNC_FLUSH C 2
+ D Z_FULL_FLUSH C 3
+ D Z_FINISH C 4
+ D Z_BLOCK C 5
+ *
+ D Z_OK C 0
+ D Z_STREAM_END C 1
+ D Z_NEED_DICT C 2
+ D Z_ERRNO C -1
+ D Z_STREAM_ERROR C -2
+ D Z_DATA_ERROR C -3
+ D Z_MEM_ERROR C -4
+ D Z_BUF_ERROR C -5
+ DZ_VERSION_ERROR C -6
+ *
+ D Z_NO_COMPRESSION...
+ D C 0
+ D Z_BEST_SPEED C 1
+ D Z_BEST_COMPRESSION...
+ D C 9
+ D Z_DEFAULT_COMPRESSION...
+ D C -1
+ *
+ D Z_FILTERED C 1
+ D Z_HUFFMAN_ONLY C 2
+ D Z_RLE C 3
+ D Z_DEFAULT_STRATEGY...
+ D C 0
+ *
+ D Z_BINARY C 0
+ D Z_ASCII C 1
+ D Z_UNKNOWN C 2
+ *
+ D Z_DEFLATED C 8
+ *
+ D Z_NULL C 0
+ *
+ **************************************************************************
+ * Types
+ **************************************************************************
+ *
+ D z_streamp S * Stream struct ptr
+ D gzFile S * File pointer
+ D z_off_t S 10i 0 Stream offsets
+ *
+ **************************************************************************
+ * Structures
+ **************************************************************************
+ *
+ * The GZIP encode/decode stream support structure.
+ *
+ D z_stream DS align based(z_streamp)
+ D zs_next_in * Next input byte
+ D zs_avail_in 10U 0 Byte cnt at next_in
+ D zs_total_in 10U 0 Total bytes read
+ D zs_next_out * Output buffer ptr
+ D zs_avail_out 10U 0 Room left @ next_out
+ D zs_total_out 10U 0 Total bytes written
+ D zs_msg * Last errmsg or null
+ D zs_state * Internal state
+ D zs_zalloc * procptr Int. state allocator
+ D zs_free * procptr Int. state dealloc.
+ D zs_opaque * Private alloc. data
+ D zs_data_type 10i 0 ASC/BIN best guess
+ D zs_adler 10u 0 Uncompr. adler32 val
+ D 10U 0 Reserved
+ D 10U 0 Ptr. alignment
+ *
+ **************************************************************************
+ * Utility function prototypes
+ **************************************************************************
+ *
+ D compress PR 10I 0 extproc('compress')
+ D dest 32767 options(*varsize) Destination buffer
+ D destLen 10U 0 Destination length
+ D source 32767 const options(*varsize) Source buffer
+ D sourceLen 10u 0 value Source length
+ *
+ D compress2 PR 10I 0 extproc('compress2')
+ D dest 32767 options(*varsize) Destination buffer
+ D destLen 10U 0 Destination length
+ D source 32767 const options(*varsize) Source buffer
+ D sourceLen 10U 0 value Source length
+ D level 10I 0 value Compression level
+ *
+ D compressBound PR 10U 0 extproc('compressBound')
+ D sourceLen 10U 0 value
+ *
+ D uncompress PR 10I 0 extproc('uncompress')
+ D dest 32767 options(*varsize) Destination buffer
+ D destLen 10U 0 Destination length
+ D source 32767 const options(*varsize) Source buffer
+ D sourceLen 10U 0 value Source length
+ *
+ D gzopen PR extproc('gzopen')
+ D like(gzFile)
+ D path * value options(*string) File pathname
+ D mode * value options(*string) Open mode
+ *
+ D gzdopen PR extproc('gzdopen')
+ D like(gzFile)
+ D fd 10i 0 value File descriptor
+ D mode * value options(*string) Open mode
+ *
+ D gzsetparams PR 10I 0 extproc('gzsetparams')
+ D file value like(gzFile) File pointer
+ D level 10I 0 value
+ D strategy 10i 0 value
+ *
+ D gzread PR 10I 0 extproc('gzread')
+ D file value like(gzFile) File pointer
+ D buf 32767 options(*varsize) Buffer
+ D len 10u 0 value Buffer length
+ *
+ D gzwrite PR 10I 0 extproc('gzwrite')
+ D file value like(gzFile) File pointer
+ D buf 32767 const options(*varsize) Buffer
+ D len 10u 0 value Buffer length
+ *
+ D gzputs PR 10I 0 extproc('gzputs')
+ D file value like(gzFile) File pointer
+ D s * value options(*string) String to output
+ *
+ D gzgets PR * extproc('gzgets')
+ D file value like(gzFile) File pointer
+ D buf 32767 options(*varsize) Read buffer
+ D len 10i 0 value Buffer length
+ *
+ D gzflush PR 10i 0 extproc('gzflush')
+ D file value like(gzFile) File pointer
+ D flush 10I 0 value Type of flush
+ *
+ D gzseek PR extproc('gzseek')
+ D like(z_off_t)
+ D file value like(gzFile) File pointer
+ D offset value like(z_off_t) Offset
+ D whence 10i 0 value Origin
+ *
+ D gzrewind PR 10i 0 extproc('gzrewind')
+ D file value like(gzFile) File pointer
+ *
+ D gztell PR extproc('gztell')
+ D like(z_off_t)
+ D file value like(gzFile) File pointer
+ *
+ D gzeof PR 10i 0 extproc('gzeof')
+ D file value like(gzFile) File pointer
+ *
+ D gzclose PR 10i 0 extproc('gzclose')
+ D file value like(gzFile) File pointer
+ *
+ D gzerror PR * extproc('gzerror') Error string
+ D file value like(gzFile) File pointer
+ D errnum 10I 0 Error code
+ *
+ D gzclearerr PR extproc('gzclearerr')
+ D file value like(gzFile) File pointer
+ *
+ **************************************************************************
+ * Basic function prototypes
+ **************************************************************************
+ *
+ D zlibVersion PR * extproc('zlibVersion') Version string
+ *
+ D deflateInit PR 10I 0 extproc('deflateInit_') Init. compression
+ D strm like(z_stream) Compression stream
+ D level 10I 0 value Compression level
+ D version * value options(*string) Version string
+ D stream_size 10i 0 value Stream struct. size
+ *
+ D deflate PR 10I 0 extproc('deflate') Compress data
+ D strm like(z_stream) Compression stream
+ D flush 10I 0 value Flush type required
+ *
+ D deflateEnd PR 10I 0 extproc('deflateEnd') Termin. compression
+ D strm like(z_stream) Compression stream
+ *
+ D inflateInit PR 10I 0 extproc('inflateInit_') Init. expansion
+ D strm like(z_stream) Expansion stream
+ D version * value options(*string) Version string
+ D stream_size 10i 0 value Stream struct. size
+ *
+ D inflate PR 10I 0 extproc('inflate') Expand data
+ D strm like(z_stream) Expansion stream
+ D flush 10I 0 value Flush type required
+ *
+ D inflateEnd PR 10I 0 extproc('inflateEnd') Termin. expansion
+ D strm like(z_stream) Expansion stream
+ *
+ **************************************************************************
+ * Advanced function prototypes
+ **************************************************************************
+ *
+ D deflateInit2 PR 10I 0 extproc('deflateInit2_') Init. compression
+ D strm like(z_stream) Compression stream
+ D level 10I 0 value Compression level
+ D method 10I 0 value Compression method
+ D windowBits 10I 0 value log2(window size)
+ D memLevel 10I 0 value Mem/cmpress tradeoff
+ D strategy 10I 0 value Compression stategy
+ D version * value options(*string) Version string
+ D stream_size 10i 0 value Stream struct. size
+ *
+ D deflateSetDictionary...
+ D PR 10I 0 extproc('deflateSetDictionary') Init. dictionary
+ D strm like(z_stream) Compression stream
+ D dictionary 32767 const options(*varsize) Dictionary bytes
+ D dictLength 10U 0 value Dictionary length
+ *
+ D deflateCopy PR 10I 0 extproc('deflateCopy') Compress strm 2 strm
+ D dest like(z_stream) Destination stream
+ D source like(z_stream) Source stream
+ *
+ D deflateReset PR 10I 0 extproc('deflateReset') End and init. stream
+ D strm like(z_stream) Compression stream
+ *
+ D deflateParams PR 10I 0 extproc('deflateParams') Change level & strat
+ D strm like(z_stream) Compression stream
+ D level 10I 0 value Compression level
+ D strategy 10I 0 value Compression stategy
+ *
+ D deflateBound PR 10U 0 extproc('deflateBound') Change level & strat
+ D strm like(z_stream) Compression stream
+ D sourcelen 10U 0 value Compression level
+ *
+ D deflatePrime PR 10I 0 extproc('deflatePrime') Change level & strat
+ D strm like(z_stream) Compression stream
+ D bits 10I 0 value Number of bits to insert
+ D value 10I 0 value Bits to insert
+ *
+ D inflateInit2 PR 10I 0 extproc('inflateInit2_') Init. expansion
+ D strm like(z_stream) Expansion stream
+ D windowBits 10I 0 value log2(window size)
+ D version * value options(*string) Version string
+ D stream_size 10i 0 value Stream struct. size
+ *
+ D inflateSetDictionary...
+ D PR 10I 0 extproc('inflateSetDictionary') Init. dictionary
+ D strm like(z_stream) Expansion stream
+ D dictionary 32767 const options(*varsize) Dictionary bytes
+ D dictLength 10U 0 value Dictionary length
+ *
+ D inflateSync PR 10I 0 extproc('inflateSync') Sync. expansion
+ D strm like(z_stream) Expansion stream
+ *
+ D inflateCopy PR 10I 0 extproc('inflateCopy')
+ D dest like(z_stream) Destination stream
+ D source like(z_stream) Source stream
+ *
+ D inflateReset PR 10I 0 extproc('inflateReset') End and init. stream
+ D strm like(z_stream) Expansion stream
+ *
+ D inflateBackInit...
+ D PR 10I 0 extproc('inflateBackInit_')
+ D strm like(z_stream) Expansion stream
+ D windowBits 10I 0 value Log2(buffer size)
+ D window 32767 options(*varsize) Buffer
+ D version * value options(*string) Version string
+ D stream_size 10i 0 value Stream struct. size
+ *
+ D inflateBack PR 10I 0 extproc('inflateBack')
+ D strm like(z_stream) Expansion stream
+ D in * value procptr Input function
+ D in_desc * value Input descriptor
+ D out * value procptr Output function
+ D out_desc * value Output descriptor
+ *
+ D inflateBackEnd PR 10I 0 extproc('inflateBackEnd')
+ D strm like(z_stream) Expansion stream
+ *
+ D zlibCompileFlags...
+ D PR 10U 0 extproc('zlibCompileFlags')
+ *
+ **************************************************************************
+ * Checksum function prototypes
+ **************************************************************************
+ *
+ D adler32 PR 10U 0 extproc('adler32') New checksum
+ D adler 10U 0 value Old checksum
+ D buf 32767 const options(*varsize) Bytes to accumulate
+ D len 10U 0 value Buffer length
+ *
+ D crc32 PR 10U 0 extproc('crc32') New checksum
+ D crc 10U 0 value Old checksum
+ D buf 32767 const options(*varsize) Bytes to accumulate
+ D len 10U 0 value Buffer length
+ *
+ **************************************************************************
+ * Miscellaneous function prototypes
+ **************************************************************************
+ *
+ D zError PR * extproc('zError') Error string
+ D err 10I 0 value Error code
+ *
+ D inflateSyncPoint...
+ D PR 10I 0 extproc('inflateSyncPoint')
+ D strm like(z_stream) Expansion stream
+ *
+ D get_crc_table PR * extproc('get_crc_table') Ptr to ulongs
+ *
+ /endif
diff --git a/compat/zlib/gzio.c b/compat/zlib/gzio.c
new file mode 100644
index 0000000..8307498
--- /dev/null
+++ b/compat/zlib/gzio.c
@@ -0,0 +1,1026 @@
+/* gzio.c -- IO on .gz files
+ * Copyright (C) 1995-2005 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ *
+ * Compile this file with -DNO_GZCOMPRESS to avoid the compression code.
+ */
+
+/* @(#) $Id: gzio.c,v 1.1 2008/12/18 14:14:59 dkf Exp $ */
+
+#include <stdio.h>
+
+#include "zutil.h"
+
+#ifdef NO_DEFLATE /* for compatibility with old definition */
+# define NO_GZCOMPRESS
+#endif
+
+#ifndef NO_DUMMY_DECL
+struct internal_state {int dummy;}; /* for buggy compilers */
+#endif
+
+#ifndef Z_BUFSIZE
+# ifdef MAXSEG_64K
+# define Z_BUFSIZE 4096 /* minimize memory usage for 16-bit DOS */
+# else
+# define Z_BUFSIZE 16384
+# endif
+#endif
+#ifndef Z_PRINTF_BUFSIZE
+# define Z_PRINTF_BUFSIZE 4096
+#endif
+
+#ifdef __MVS__
+# pragma map (fdopen , "\174\174FDOPEN")
+ FILE *fdopen(int, const char *);
+#endif
+
+#ifndef STDC
+extern voidp malloc OF((uInt size));
+extern void free OF((voidpf ptr));
+#endif
+
+#define ALLOC(size) malloc(size)
+#define TRYFREE(p) {if (p) free(p);}
+
+static int const gz_magic[2] = {0x1f, 0x8b}; /* gzip magic header */
+
+/* gzip flag byte */
+#define ASCII_FLAG 0x01 /* bit 0 set: file probably ascii text */
+#define HEAD_CRC 0x02 /* bit 1 set: header CRC present */
+#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */
+#define ORIG_NAME 0x08 /* bit 3 set: original file name present */
+#define COMMENT 0x10 /* bit 4 set: file comment present */
+#define RESERVED 0xE0 /* bits 5..7: reserved */
+
+typedef struct gz_stream {
+ z_stream stream;
+ int z_err; /* error code for last stream operation */
+ int z_eof; /* set if end of input file */
+ FILE *file; /* .gz file */
+ Byte *inbuf; /* input buffer */
+ Byte *outbuf; /* output buffer */
+ uLong crc; /* crc32 of uncompressed data */
+ char *msg; /* error message */
+ char *path; /* path name for debugging only */
+ int transparent; /* 1 if input file is not a .gz file */
+ char mode; /* 'w' or 'r' */
+ z_off_t start; /* start of compressed data in file (header skipped) */
+ z_off_t in; /* bytes into deflate or inflate */
+ z_off_t out; /* bytes out of deflate or inflate */
+ int back; /* one character push-back */
+ int last; /* true if push-back is last character */
+} gz_stream;
+
+
+local gzFile gz_open OF((const char *path, const char *mode, int fd));
+local int do_flush OF((gzFile file, int flush));
+local int get_byte OF((gz_stream *s));
+local void check_header OF((gz_stream *s));
+local int destroy OF((gz_stream *s));
+local void putLong OF((FILE *file, uLong x));
+local uLong getLong OF((gz_stream *s));
+
+/* ===========================================================================
+ Opens a gzip (.gz) file for reading or writing. The mode parameter
+ is as in fopen ("rb" or "wb"). The file is given either by file descriptor
+ or path name (if fd == -1).
+ gz_open returns NULL if the file could not be opened or if there was
+ insufficient memory to allocate the (de)compression state; errno
+ can be checked to distinguish the two cases (if errno is zero, the
+ zlib error is Z_MEM_ERROR).
+*/
+local gzFile gz_open (path, mode, fd)
+ const char *path;
+ const char *mode;
+ int fd;
+{
+ int err;
+ int level = Z_DEFAULT_COMPRESSION; /* compression level */
+ int strategy = Z_DEFAULT_STRATEGY; /* compression strategy */
+ char *p = (char*)mode;
+ gz_stream *s;
+ char fmode[80]; /* copy of mode, without the compression level */
+ char *m = fmode;
+
+ if (!path || !mode) return Z_NULL;
+
+ s = (gz_stream *)ALLOC(sizeof(gz_stream));
+ if (!s) return Z_NULL;
+
+ s->stream.zalloc = (alloc_func)0;
+ s->stream.zfree = (free_func)0;
+ s->stream.opaque = (voidpf)0;
+ s->stream.next_in = s->inbuf = Z_NULL;
+ s->stream.next_out = s->outbuf = Z_NULL;
+ s->stream.avail_in = s->stream.avail_out = 0;
+ s->file = NULL;
+ s->z_err = Z_OK;
+ s->z_eof = 0;
+ s->in = 0;
+ s->out = 0;
+ s->back = EOF;
+ s->crc = crc32(0L, Z_NULL, 0);
+ s->msg = NULL;
+ s->transparent = 0;
+
+ s->path = (char*)ALLOC(strlen(path)+1);
+ if (s->path == NULL) {
+ return destroy(s), (gzFile)Z_NULL;
+ }
+ strcpy(s->path, path); /* do this early for debugging */
+
+ s->mode = '\0';
+ do {
+ if (*p == 'r') s->mode = 'r';
+ if (*p == 'w' || *p == 'a') s->mode = 'w';
+ if (*p >= '0' && *p <= '9') {
+ level = *p - '0';
+ } else if (*p == 'f') {
+ strategy = Z_FILTERED;
+ } else if (*p == 'h') {
+ strategy = Z_HUFFMAN_ONLY;
+ } else if (*p == 'R') {
+ strategy = Z_RLE;
+ } else {
+ *m++ = *p; /* copy the mode */
+ }
+ } while (*p++ && m != fmode + sizeof(fmode));
+ if (s->mode == '\0') return destroy(s), (gzFile)Z_NULL;
+
+ if (s->mode == 'w') {
+#ifdef NO_GZCOMPRESS
+ err = Z_STREAM_ERROR;
+#else
+ err = deflateInit2(&(s->stream), level,
+ Z_DEFLATED, -MAX_WBITS, DEF_MEM_LEVEL, strategy);
+ /* windowBits is passed < 0 to suppress zlib header */
+
+ s->stream.next_out = s->outbuf = (Byte*)ALLOC(Z_BUFSIZE);
+#endif
+ if (err != Z_OK || s->outbuf == Z_NULL) {
+ return destroy(s), (gzFile)Z_NULL;
+ }
+ } else {
+ s->stream.next_in = s->inbuf = (Byte*)ALLOC(Z_BUFSIZE);
+
+ err = inflateInit2(&(s->stream), -MAX_WBITS);
+ /* windowBits is passed < 0 to tell that there is no zlib header.
+ * Note that in this case inflate *requires* an extra "dummy" byte
+ * after the compressed stream in order to complete decompression and
+ * return Z_STREAM_END. Here the gzip CRC32 ensures that 4 bytes are
+ * present after the compressed stream.
+ */
+ if (err != Z_OK || s->inbuf == Z_NULL) {
+ return destroy(s), (gzFile)Z_NULL;
+ }
+ }
+ s->stream.avail_out = Z_BUFSIZE;
+
+ errno = 0;
+ s->file = fd < 0 ? F_OPEN(path, fmode) : (FILE*)fdopen(fd, fmode);
+
+ if (s->file == NULL) {
+ return destroy(s), (gzFile)Z_NULL;
+ }
+ if (s->mode == 'w') {
+ /* Write a very simple .gz header:
+ */
+ fprintf(s->file, "%c%c%c%c%c%c%c%c%c%c", gz_magic[0], gz_magic[1],
+ Z_DEFLATED, 0 /*flags*/, 0,0,0,0 /*time*/, 0 /*xflags*/, OS_CODE);
+ s->start = 10L;
+ /* We use 10L instead of ftell(s->file) to because ftell causes an
+ * fflush on some systems. This version of the library doesn't use
+ * start anyway in write mode, so this initialization is not
+ * necessary.
+ */
+ } else {
+ check_header(s); /* skip the .gz header */
+ s->start = ftell(s->file) - s->stream.avail_in;
+ }
+
+ return (gzFile)s;
+}
+
+/* ===========================================================================
+ Opens a gzip (.gz) file for reading or writing.
+*/
+gzFile ZEXPORT gzopen (path, mode)
+ const char *path;
+ const char *mode;
+{
+ return gz_open (path, mode, -1);
+}
+
+/* ===========================================================================
+ Associate a gzFile with the file descriptor fd. fd is not dup'ed here
+ to mimic the behavio(u)r of fdopen.
+*/
+gzFile ZEXPORT gzdopen (fd, mode)
+ int fd;
+ const char *mode;
+{
+ char name[46]; /* allow for up to 128-bit integers */
+
+ if (fd < 0) return (gzFile)Z_NULL;
+ sprintf(name, "<fd:%d>", fd); /* for debugging */
+
+ return gz_open (name, mode, fd);
+}
+
+/* ===========================================================================
+ * Update the compression level and strategy
+ */
+int ZEXPORT gzsetparams (file, level, strategy)
+ gzFile file;
+ int level;
+ int strategy;
+{
+ gz_stream *s = (gz_stream*)file;
+
+ if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR;
+
+ /* Make room to allow flushing */
+ if (s->stream.avail_out == 0) {
+
+ s->stream.next_out = s->outbuf;
+ if (fwrite(s->outbuf, 1, Z_BUFSIZE, s->file) != Z_BUFSIZE) {
+ s->z_err = Z_ERRNO;
+ }
+ s->stream.avail_out = Z_BUFSIZE;
+ }
+
+ return deflateParams (&(s->stream), level, strategy);
+}
+
+/* ===========================================================================
+ Read a byte from a gz_stream; update next_in and avail_in. Return EOF
+ for end of file.
+ IN assertion: the stream s has been sucessfully opened for reading.
+*/
+local int get_byte(s)
+ gz_stream *s;
+{
+ if (s->z_eof) return EOF;
+ if (s->stream.avail_in == 0) {
+ errno = 0;
+ s->stream.avail_in = (uInt)fread(s->inbuf, 1, Z_BUFSIZE, s->file);
+ if (s->stream.avail_in == 0) {
+ s->z_eof = 1;
+ if (ferror(s->file)) s->z_err = Z_ERRNO;
+ return EOF;
+ }
+ s->stream.next_in = s->inbuf;
+ }
+ s->stream.avail_in--;
+ return *(s->stream.next_in)++;
+}
+
+/* ===========================================================================
+ Check the gzip header of a gz_stream opened for reading. Set the stream
+ mode to transparent if the gzip magic header is not present; set s->err
+ to Z_DATA_ERROR if the magic header is present but the rest of the header
+ is incorrect.
+ IN assertion: the stream s has already been created sucessfully;
+ s->stream.avail_in is zero for the first time, but may be non-zero
+ for concatenated .gz files.
+*/
+local void check_header(s)
+ gz_stream *s;
+{
+ int method; /* method byte */
+ int flags; /* flags byte */
+ uInt len;
+ int c;
+
+ /* Assure two bytes in the buffer so we can peek ahead -- handle case
+ where first byte of header is at the end of the buffer after the last
+ gzip segment */
+ len = s->stream.avail_in;
+ if (len < 2) {
+ if (len) s->inbuf[0] = s->stream.next_in[0];
+ errno = 0;
+ len = (uInt)fread(s->inbuf + len, 1, Z_BUFSIZE >> len, s->file);
+ if (len == 0 && ferror(s->file)) s->z_err = Z_ERRNO;
+ s->stream.avail_in += len;
+ s->stream.next_in = s->inbuf;
+ if (s->stream.avail_in < 2) {
+ s->transparent = s->stream.avail_in;
+ return;
+ }
+ }
+
+ /* Peek ahead to check the gzip magic header */
+ if (s->stream.next_in[0] != gz_magic[0] ||
+ s->stream.next_in[1] != gz_magic[1]) {
+ s->transparent = 1;
+ return;
+ }
+ s->stream.avail_in -= 2;
+ s->stream.next_in += 2;
+
+ /* Check the rest of the gzip header */
+ method = get_byte(s);
+ flags = get_byte(s);
+ if (method != Z_DEFLATED || (flags & RESERVED) != 0) {
+ s->z_err = Z_DATA_ERROR;
+ return;
+ }
+
+ /* Discard time, xflags and OS code: */
+ for (len = 0; len < 6; len++) (void)get_byte(s);
+
+ if ((flags & EXTRA_FIELD) != 0) { /* skip the extra field */
+ len = (uInt)get_byte(s);
+ len += ((uInt)get_byte(s))<<8;
+ /* len is garbage if EOF but the loop below will quit anyway */
+ while (len-- != 0 && get_byte(s) != EOF) ;
+ }
+ if ((flags & ORIG_NAME) != 0) { /* skip the original file name */
+ while ((c = get_byte(s)) != 0 && c != EOF) ;
+ }
+ if ((flags & COMMENT) != 0) { /* skip the .gz file comment */
+ while ((c = get_byte(s)) != 0 && c != EOF) ;
+ }
+ if ((flags & HEAD_CRC) != 0) { /* skip the header crc */
+ for (len = 0; len < 2; len++) (void)get_byte(s);
+ }
+ s->z_err = s->z_eof ? Z_DATA_ERROR : Z_OK;
+}
+
+ /* ===========================================================================
+ * Cleanup then free the given gz_stream. Return a zlib error code.
+ Try freeing in the reverse order of allocations.
+ */
+local int destroy (s)
+ gz_stream *s;
+{
+ int err = Z_OK;
+
+ if (!s) return Z_STREAM_ERROR;
+
+ TRYFREE(s->msg);
+
+ if (s->stream.state != NULL) {
+ if (s->mode == 'w') {
+#ifdef NO_GZCOMPRESS
+ err = Z_STREAM_ERROR;
+#else
+ err = deflateEnd(&(s->stream));
+#endif
+ } else if (s->mode == 'r') {
+ err = inflateEnd(&(s->stream));
+ }
+ }
+ if (s->file != NULL && fclose(s->file)) {
+#ifdef ESPIPE
+ if (errno != ESPIPE) /* fclose is broken for pipes in HP/UX */
+#endif
+ err = Z_ERRNO;
+ }
+ if (s->z_err < 0) err = s->z_err;
+
+ TRYFREE(s->inbuf);
+ TRYFREE(s->outbuf);
+ TRYFREE(s->path);
+ TRYFREE(s);
+ return err;
+}
+
+/* ===========================================================================
+ Reads the given number of uncompressed bytes from the compressed file.
+ gzread returns the number of bytes actually read (0 for end of file).
+*/
+int ZEXPORT gzread (file, buf, len)
+ gzFile file;
+ voidp buf;
+ unsigned len;
+{
+ gz_stream *s = (gz_stream*)file;
+ Bytef *start = (Bytef*)buf; /* starting point for crc computation */
+ Byte *next_out; /* == stream.next_out but not forced far (for MSDOS) */
+
+ if (s == NULL || s->mode != 'r') return Z_STREAM_ERROR;
+
+ if (s->z_err == Z_DATA_ERROR || s->z_err == Z_ERRNO) return -1;
+ if (s->z_err == Z_STREAM_END) return 0; /* EOF */
+
+ next_out = (Byte*)buf;
+ s->stream.next_out = (Bytef*)buf;
+ s->stream.avail_out = len;
+
+ if (s->stream.avail_out && s->back != EOF) {
+ *next_out++ = s->back;
+ s->stream.next_out++;
+ s->stream.avail_out--;
+ s->back = EOF;
+ s->out++;
+ start++;
+ if (s->last) {
+ s->z_err = Z_STREAM_END;
+ return 1;
+ }
+ }
+
+ while (s->stream.avail_out != 0) {
+
+ if (s->transparent) {
+ /* Copy first the lookahead bytes: */
+ uInt n = s->stream.avail_in;
+ if (n > s->stream.avail_out) n = s->stream.avail_out;
+ if (n > 0) {
+ zmemcpy(s->stream.next_out, s->stream.next_in, n);
+ next_out += n;
+ s->stream.next_out = next_out;
+ s->stream.next_in += n;
+ s->stream.avail_out -= n;
+ s->stream.avail_in -= n;
+ }
+ if (s->stream.avail_out > 0) {
+ s->stream.avail_out -=
+ (uInt)fread(next_out, 1, s->stream.avail_out, s->file);
+ }
+ len -= s->stream.avail_out;
+ s->in += len;
+ s->out += len;
+ if (len == 0) s->z_eof = 1;
+ return (int)len;
+ }
+ if (s->stream.avail_in == 0 && !s->z_eof) {
+
+ errno = 0;
+ s->stream.avail_in = (uInt)fread(s->inbuf, 1, Z_BUFSIZE, s->file);
+ if (s->stream.avail_in == 0) {
+ s->z_eof = 1;
+ if (ferror(s->file)) {
+ s->z_err = Z_ERRNO;
+ break;
+ }
+ }
+ s->stream.next_in = s->inbuf;
+ }
+ s->in += s->stream.avail_in;
+ s->out += s->stream.avail_out;
+ s->z_err = inflate(&(s->stream), Z_NO_FLUSH);
+ s->in -= s->stream.avail_in;
+ s->out -= s->stream.avail_out;
+
+ if (s->z_err == Z_STREAM_END) {
+ /* Check CRC and original size */
+ s->crc = crc32(s->crc, start, (uInt)(s->stream.next_out - start));
+ start = s->stream.next_out;
+
+ if (getLong(s) != s->crc) {
+ s->z_err = Z_DATA_ERROR;
+ } else {
+ (void)getLong(s);
+ /* The uncompressed length returned by above getlong() may be
+ * different from s->out in case of concatenated .gz files.
+ * Check for such files:
+ */
+ check_header(s);
+ if (s->z_err == Z_OK) {
+ inflateReset(&(s->stream));
+ s->crc = crc32(0L, Z_NULL, 0);
+ }
+ }
+ }
+ if (s->z_err != Z_OK || s->z_eof) break;
+ }
+ s->crc = crc32(s->crc, start, (uInt)(s->stream.next_out - start));
+
+ if (len == s->stream.avail_out &&
+ (s->z_err == Z_DATA_ERROR || s->z_err == Z_ERRNO))
+ return -1;
+ return (int)(len - s->stream.avail_out);
+}
+
+
+/* ===========================================================================
+ Reads one byte from the compressed file. gzgetc returns this byte
+ or -1 in case of end of file or error.
+*/
+int ZEXPORT gzgetc(file)
+ gzFile file;
+{
+ unsigned char c;
+
+ return gzread(file, &c, 1) == 1 ? c : -1;
+}
+
+
+/* ===========================================================================
+ Push one byte back onto the stream.
+*/
+int ZEXPORT gzungetc(c, file)
+ int c;
+ gzFile file;
+{
+ gz_stream *s = (gz_stream*)file;
+
+ if (s == NULL || s->mode != 'r' || c == EOF || s->back != EOF) return EOF;
+ s->back = c;
+ s->out--;
+ s->last = (s->z_err == Z_STREAM_END);
+ if (s->last) s->z_err = Z_OK;
+ s->z_eof = 0;
+ return c;
+}
+
+
+/* ===========================================================================
+ Reads bytes from the compressed file until len-1 characters are
+ read, or a newline character is read and transferred to buf, or an
+ end-of-file condition is encountered. The string is then terminated
+ with a null character.
+ gzgets returns buf, or Z_NULL in case of error.
+
+ The current implementation is not optimized at all.
+*/
+char * ZEXPORT gzgets(file, buf, len)
+ gzFile file;
+ char *buf;
+ int len;
+{
+ char *b = buf;
+ if (buf == Z_NULL || len <= 0) return Z_NULL;
+
+ while (--len > 0 && gzread(file, buf, 1) == 1 && *buf++ != '\n') ;
+ *buf = '\0';
+ return b == buf && len > 0 ? Z_NULL : b;
+}
+
+
+#ifndef NO_GZCOMPRESS
+/* ===========================================================================
+ Writes the given number of uncompressed bytes into the compressed file.
+ gzwrite returns the number of bytes actually written (0 in case of error).
+*/
+int ZEXPORT gzwrite (file, buf, len)
+ gzFile file;
+ voidpc buf;
+ unsigned len;
+{
+ gz_stream *s = (gz_stream*)file;
+
+ if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR;
+
+ s->stream.next_in = (Bytef*)buf;
+ s->stream.avail_in = len;
+
+ while (s->stream.avail_in != 0) {
+
+ if (s->stream.avail_out == 0) {
+
+ s->stream.next_out = s->outbuf;
+ if (fwrite(s->outbuf, 1, Z_BUFSIZE, s->file) != Z_BUFSIZE) {
+ s->z_err = Z_ERRNO;
+ break;
+ }
+ s->stream.avail_out = Z_BUFSIZE;
+ }
+ s->in += s->stream.avail_in;
+ s->out += s->stream.avail_out;
+ s->z_err = deflate(&(s->stream), Z_NO_FLUSH);
+ s->in -= s->stream.avail_in;
+ s->out -= s->stream.avail_out;
+ if (s->z_err != Z_OK) break;
+ }
+ s->crc = crc32(s->crc, (const Bytef *)buf, len);
+
+ return (int)(len - s->stream.avail_in);
+}
+
+
+/* ===========================================================================
+ Converts, formats, and writes the args to the compressed file under
+ control of the format string, as in fprintf. gzprintf returns the number of
+ uncompressed bytes actually written (0 in case of error).
+*/
+#ifdef STDC
+#include <stdarg.h>
+
+int ZEXPORTVA gzprintf (gzFile file, const char *format, /* args */ ...)
+{
+ char buf[Z_PRINTF_BUFSIZE];
+ va_list va;
+ int len;
+
+ buf[sizeof(buf) - 1] = 0;
+ va_start(va, format);
+#ifdef NO_vsnprintf
+# ifdef HAS_vsprintf_void
+ (void)vsprintf(buf, format, va);
+ va_end(va);
+ for (len = 0; len < sizeof(buf); len++)
+ if (buf[len] == 0) break;
+# else
+ len = vsprintf(buf, format, va);
+ va_end(va);
+# endif
+#else
+# ifdef HAS_vsnprintf_void
+ (void)vsnprintf(buf, sizeof(buf), format, va);
+ va_end(va);
+ len = strlen(buf);
+# else
+ len = vsnprintf(buf, sizeof(buf), format, va);
+ va_end(va);
+# endif
+#endif
+ if (len <= 0 || len >= (int)sizeof(buf) || buf[sizeof(buf) - 1] != 0)
+ return 0;
+ return gzwrite(file, buf, (unsigned)len);
+}
+#else /* not ANSI C */
+
+int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
+ a11, a12, a13, a14, a15, a16, a17, a18, a19, a20)
+ gzFile file;
+ const char *format;
+ int a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
+ a11, a12, a13, a14, a15, a16, a17, a18, a19, a20;
+{
+ char buf[Z_PRINTF_BUFSIZE];
+ int len;
+
+ buf[sizeof(buf) - 1] = 0;
+#ifdef NO_snprintf
+# ifdef HAS_sprintf_void
+ sprintf(buf, format, a1, a2, a3, a4, a5, a6, a7, a8,
+ a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
+ for (len = 0; len < sizeof(buf); len++)
+ if (buf[len] == 0) break;
+# else
+ len = sprintf(buf, format, a1, a2, a3, a4, a5, a6, a7, a8,
+ a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
+# endif
+#else
+# ifdef HAS_snprintf_void
+ snprintf(buf, sizeof(buf), format, a1, a2, a3, a4, a5, a6, a7, a8,
+ a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
+ len = strlen(buf);
+# else
+ len = snprintf(buf, sizeof(buf), format, a1, a2, a3, a4, a5, a6, a7, a8,
+ a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
+# endif
+#endif
+ if (len <= 0 || len >= sizeof(buf) || buf[sizeof(buf) - 1] != 0)
+ return 0;
+ return gzwrite(file, buf, len);
+}
+#endif
+
+/* ===========================================================================
+ Writes c, converted to an unsigned char, into the compressed file.
+ gzputc returns the value that was written, or -1 in case of error.
+*/
+int ZEXPORT gzputc(file, c)
+ gzFile file;
+ int c;
+{
+ unsigned char cc = (unsigned char) c; /* required for big endian systems */
+
+ return gzwrite(file, &cc, 1) == 1 ? (int)cc : -1;
+}
+
+
+/* ===========================================================================
+ Writes the given null-terminated string to the compressed file, excluding
+ the terminating null character.
+ gzputs returns the number of characters written, or -1 in case of error.
+*/
+int ZEXPORT gzputs(file, s)
+ gzFile file;
+ const char *s;
+{
+ return gzwrite(file, (char*)s, (unsigned)strlen(s));
+}
+
+
+/* ===========================================================================
+ Flushes all pending output into the compressed file. The parameter
+ flush is as in the deflate() function.
+*/
+local int do_flush (file, flush)
+ gzFile file;
+ int flush;
+{
+ uInt len;
+ int done = 0;
+ gz_stream *s = (gz_stream*)file;
+
+ if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR;
+
+ s->stream.avail_in = 0; /* should be zero already anyway */
+
+ for (;;) {
+ len = Z_BUFSIZE - s->stream.avail_out;
+
+ if (len != 0) {
+ if ((uInt)fwrite(s->outbuf, 1, len, s->file) != len) {
+ s->z_err = Z_ERRNO;
+ return Z_ERRNO;
+ }
+ s->stream.next_out = s->outbuf;
+ s->stream.avail_out = Z_BUFSIZE;
+ }
+ if (done) break;
+ s->out += s->stream.avail_out;
+ s->z_err = deflate(&(s->stream), flush);
+ s->out -= s->stream.avail_out;
+
+ /* Ignore the second of two consecutive flushes: */
+ if (len == 0 && s->z_err == Z_BUF_ERROR) s->z_err = Z_OK;
+
+ /* deflate has finished flushing only when it hasn't used up
+ * all the available space in the output buffer:
+ */
+ done = (s->stream.avail_out != 0 || s->z_err == Z_STREAM_END);
+
+ if (s->z_err != Z_OK && s->z_err != Z_STREAM_END) break;
+ }
+ return s->z_err == Z_STREAM_END ? Z_OK : s->z_err;
+}
+
+int ZEXPORT gzflush (file, flush)
+ gzFile file;
+ int flush;
+{
+ gz_stream *s = (gz_stream*)file;
+ int err = do_flush (file, flush);
+
+ if (err) return err;
+ fflush(s->file);
+ return s->z_err == Z_STREAM_END ? Z_OK : s->z_err;
+}
+#endif /* NO_GZCOMPRESS */
+
+/* ===========================================================================
+ Sets the starting position for the next gzread or gzwrite on the given
+ compressed file. The offset represents a number of bytes in the
+ gzseek returns the resulting offset location as measured in bytes from
+ the beginning of the uncompressed stream, or -1 in case of error.
+ SEEK_END is not implemented, returns error.
+ In this version of the library, gzseek can be extremely slow.
+*/
+z_off_t ZEXPORT gzseek (file, offset, whence)
+ gzFile file;
+ z_off_t offset;
+ int whence;
+{
+ gz_stream *s = (gz_stream*)file;
+
+ if (s == NULL || whence == SEEK_END ||
+ s->z_err == Z_ERRNO || s->z_err == Z_DATA_ERROR) {
+ return -1L;
+ }
+
+ if (s->mode == 'w') {
+#ifdef NO_GZCOMPRESS
+ return -1L;
+#else
+ if (whence == SEEK_SET) {
+ offset -= s->in;
+ }
+ if (offset < 0) return -1L;
+
+ /* At this point, offset is the number of zero bytes to write. */
+ if (s->inbuf == Z_NULL) {
+ s->inbuf = (Byte*)ALLOC(Z_BUFSIZE); /* for seeking */
+ if (s->inbuf == Z_NULL) return -1L;
+ zmemzero(s->inbuf, Z_BUFSIZE);
+ }
+ while (offset > 0) {
+ uInt size = Z_BUFSIZE;
+ if (offset < Z_BUFSIZE) size = (uInt)offset;
+
+ size = gzwrite(file, s->inbuf, size);
+ if (size == 0) return -1L;
+
+ offset -= size;
+ }
+ return s->in;
+#endif
+ }
+ /* Rest of function is for reading only */
+
+ /* compute absolute position */
+ if (whence == SEEK_CUR) {
+ offset += s->out;
+ }
+ if (offset < 0) return -1L;
+
+ if (s->transparent) {
+ /* map to fseek */
+ s->back = EOF;
+ s->stream.avail_in = 0;
+ s->stream.next_in = s->inbuf;
+ if (fseek(s->file, offset, SEEK_SET) < 0) return -1L;
+
+ s->in = s->out = offset;
+ return offset;
+ }
+
+ /* For a negative seek, rewind and use positive seek */
+ if (offset >= s->out) {
+ offset -= s->out;
+ } else if (gzrewind(file) < 0) {
+ return -1L;
+ }
+ /* offset is now the number of bytes to skip. */
+
+ if (offset != 0 && s->outbuf == Z_NULL) {
+ s->outbuf = (Byte*)ALLOC(Z_BUFSIZE);
+ if (s->outbuf == Z_NULL) return -1L;
+ }
+ if (offset && s->back != EOF) {
+ s->back = EOF;
+ s->out++;
+ offset--;
+ if (s->last) s->z_err = Z_STREAM_END;
+ }
+ while (offset > 0) {
+ int size = Z_BUFSIZE;
+ if (offset < Z_BUFSIZE) size = (int)offset;
+
+ size = gzread(file, s->outbuf, (uInt)size);
+ if (size <= 0) return -1L;
+ offset -= size;
+ }
+ return s->out;
+}
+
+/* ===========================================================================
+ Rewinds input file.
+*/
+int ZEXPORT gzrewind (file)
+ gzFile file;
+{
+ gz_stream *s = (gz_stream*)file;
+
+ if (s == NULL || s->mode != 'r') return -1;
+
+ s->z_err = Z_OK;
+ s->z_eof = 0;
+ s->back = EOF;
+ s->stream.avail_in = 0;
+ s->stream.next_in = s->inbuf;
+ s->crc = crc32(0L, Z_NULL, 0);
+ if (!s->transparent) (void)inflateReset(&s->stream);
+ s->in = 0;
+ s->out = 0;
+ return fseek(s->file, s->start, SEEK_SET);
+}
+
+/* ===========================================================================
+ Returns the starting position for the next gzread or gzwrite on the
+ given compressed file. This position represents a number of bytes in the
+ uncompressed data stream.
+*/
+z_off_t ZEXPORT gztell (file)
+ gzFile file;
+{
+ return gzseek(file, 0L, SEEK_CUR);
+}
+
+/* ===========================================================================
+ Returns 1 when EOF has previously been detected reading the given
+ input stream, otherwise zero.
+*/
+int ZEXPORT gzeof (file)
+ gzFile file;
+{
+ gz_stream *s = (gz_stream*)file;
+
+ /* With concatenated compressed files that can have embedded
+ * crc trailers, z_eof is no longer the only/best indicator of EOF
+ * on a gz_stream. Handle end-of-stream error explicitly here.
+ */
+ if (s == NULL || s->mode != 'r') return 0;
+ if (s->z_eof) return 1;
+ return s->z_err == Z_STREAM_END;
+}
+
+/* ===========================================================================
+ Returns 1 if reading and doing so transparently, otherwise zero.
+*/
+int ZEXPORT gzdirect (file)
+ gzFile file;
+{
+ gz_stream *s = (gz_stream*)file;
+
+ if (s == NULL || s->mode != 'r') return 0;
+ return s->transparent;
+}
+
+/* ===========================================================================
+ Outputs a long in LSB order to the given file
+*/
+local void putLong (file, x)
+ FILE *file;
+ uLong x;
+{
+ int n;
+ for (n = 0; n < 4; n++) {
+ fputc((int)(x & 0xff), file);
+ x >>= 8;
+ }
+}
+
+/* ===========================================================================
+ Reads a long in LSB order from the given gz_stream. Sets z_err in case
+ of error.
+*/
+local uLong getLong (s)
+ gz_stream *s;
+{
+ uLong x = (uLong)get_byte(s);
+ int c;
+
+ x += ((uLong)get_byte(s))<<8;
+ x += ((uLong)get_byte(s))<<16;
+ c = get_byte(s);
+ if (c == EOF) s->z_err = Z_DATA_ERROR;
+ x += ((uLong)c)<<24;
+ return x;
+}
+
+/* ===========================================================================
+ Flushes all pending output if necessary, closes the compressed file
+ and deallocates all the (de)compression state.
+*/
+int ZEXPORT gzclose (file)
+ gzFile file;
+{
+ gz_stream *s = (gz_stream*)file;
+
+ if (s == NULL) return Z_STREAM_ERROR;
+
+ if (s->mode == 'w') {
+#ifdef NO_GZCOMPRESS
+ return Z_STREAM_ERROR;
+#else
+ if (do_flush (file, Z_FINISH) != Z_OK)
+ return destroy((gz_stream*)file);
+
+ putLong (s->file, s->crc);
+ putLong (s->file, (uLong)(s->in & 0xffffffff));
+#endif
+ }
+ return destroy((gz_stream*)file);
+}
+
+#ifdef STDC
+# define zstrerror(errnum) strerror(errnum)
+#else
+# define zstrerror(errnum) ""
+#endif
+
+/* ===========================================================================
+ Returns the error message for the last error which occurred on the
+ given compressed file. errnum is set to zlib error number. If an
+ error occurred in the file system and not in the compression library,
+ errnum is set to Z_ERRNO and the application may consult errno
+ to get the exact error code.
+*/
+const char * ZEXPORT gzerror (file, errnum)
+ gzFile file;
+ int *errnum;
+{
+ char *m;
+ gz_stream *s = (gz_stream*)file;
+
+ if (s == NULL) {
+ *errnum = Z_STREAM_ERROR;
+ return (const char*)ERR_MSG(Z_STREAM_ERROR);
+ }
+ *errnum = s->z_err;
+ if (*errnum == Z_OK) return (const char*)"";
+
+ m = (char*)(*errnum == Z_ERRNO ? zstrerror(errno) : s->stream.msg);
+
+ if (m == NULL || *m == '\0') m = (char*)ERR_MSG(s->z_err);
+
+ TRYFREE(s->msg);
+ s->msg = (char*)ALLOC(strlen(s->path) + strlen(m) + 3);
+ if (s->msg == Z_NULL) return (const char*)ERR_MSG(Z_MEM_ERROR);
+ strcpy(s->msg, s->path);
+ strcat(s->msg, ": ");
+ strcat(s->msg, m);
+ return (const char*)s->msg;
+}
+
+/* ===========================================================================
+ Clear the error and end-of-file flags, and do the same for the real file.
+*/
+void ZEXPORT gzclearerr (file)
+ gzFile file;
+{
+ gz_stream *s = (gz_stream*)file;
+
+ if (s == NULL) return;
+ if (s->z_err != Z_STREAM_END) s->z_err = Z_OK;
+ s->z_eof = 0;
+ clearerr(s->file);
+}
diff --git a/compat/zlib/old/zlib.html b/compat/zlib/old/zlib.html
new file mode 100644
index 0000000..8c1b190
--- /dev/null
+++ b/compat/zlib/old/zlib.html
@@ -0,0 +1,971 @@
+<html>
+<head>
+ <title>
+ zlib general purpose compression library version 1.1.4
+ </title>
+</head>
+<body bgcolor="White" text="Black" vlink="Red" alink="Navy" link="Red">
+<!-- background="zlibbg.gif" -->
+
+<h1> zlib 1.1.4 Manual </h1>
+<hr>
+<a name="Contents"><h2>Contents</h2>
+<ol type="I">
+<li> <a href="#Prologue">Prologue</a>
+<li> <a href="#Introduction">Introduction</a>
+<li> <a href="#Utility functions">Utility functions</a>
+<li> <a href="#Basic functions">Basic functions</a>
+<li> <a href="#Advanced functions">Advanced functions</a>
+<li> <a href="#Constants">Constants</a>
+<li> <a href="#struct z_stream_s">struct z_stream_s</a>
+<li> <a href="#Checksum functions">Checksum functions</a>
+<li> <a href="#Misc">Misc</a>
+</ol>
+<hr>
+<a name="Prologue"><h2> Prologue </h2>
+ 'zlib' general purpose compression library version 1.1.4, March 11th, 2002
+ <p>
+ Copyright (C) 1995-2002 Jean-loup Gailly and Mark Adler
+ <p>
+ This software is provided 'as-is', without any express or implied
+ warranty. In no event will the authors be held liable for any damages
+ arising from the use of this software.
+ <p>
+ Permission is granted to anyone to use this software for any purpose,
+ including commercial applications, and to alter it and redistribute it
+ freely, subject to the following restrictions:
+ <ol>
+ <li> The origin of this software must not be misrepresented ; you must not
+ claim that you wrote the original software. If you use this software
+ in a product, an acknowledgment in the product documentation would be
+ appreciated but is not required.
+ <li> Altered source versions must be plainly marked as such, and must not be
+ misrepresented as being the original software.
+ <li> This notice may not be removed or altered from any source distribution.
+ </ol>
+
+ <dl>
+ <dt>Jean-loup Gailly
+ <dd><a href="mailto:jloup@gzip.org">jloup@gzip.org</a>
+ <dt>Mark Adler
+ <dd><a href="mailto:madler@alumni.caltech.edu">madler@alumni.caltech.edu</a>
+ </dl>
+
+ The data format used by the zlib library is described by RFCs (Request for
+ Comments) 1950 to 1952 in the files
+ <a href="ftp://ds.internic.net/rfc/rfc1950.txt">
+ ftp://ds.internic.net/rfc/rfc1950.txt </a>
+ (zlib format),
+ <a href="ftp://ds.internic.net/rfc/rfc1951.txt">
+ rfc1951.txt </a>
+ (<a href="#deflate">deflate</a> format) and
+ <a href="ftp://ds.internic.net/rfc/rfc1952.txt">
+ rfc1952.txt </a>
+ (gzip format).
+ <p>
+ This manual is converted from zlib.h by
+ <a href="mailto:piaip@csie.ntu.edu.tw"> piaip </a>
+ <p>
+ Visit <a href="http://ftp.cdrom.com/pub/infozip/zlib/">
+ http://ftp.cdrom.com/pub/infozip/zlib/</a>
+ for the official zlib web page.
+ <p>
+
+<hr>
+<a name="Introduction"><h2> Introduction </h2>
+ The 'zlib' compression library provides in-memory compression and
+ decompression functions, including integrity checks of the uncompressed
+ data. This version of the library supports only one compression method
+ (deflation) but other algorithms will be added later and will have the same
+ stream interface.
+ <p>
+
+ Compression can be done in a single step if the buffers are large
+ enough (for example if an input file is mmap'ed), or can be done by
+ repeated calls of the compression function. In the latter case, the
+ application must provide more input and/or consume the output
+ (providing more output space) before each call.
+ <p>
+
+ The library also supports reading and writing files in gzip (.gz) format
+ with an interface similar to that of stdio.
+ <p>
+
+ The library does not install any signal handler. The decoder checks
+ the consistency of the compressed data, so the library should never
+ crash even in case of corrupted input.
+ <p>
+
+<hr>
+<a name="Utility functions"><h2> Utility functions </h2>
+ The following utility functions are implemented on top of the
+ <a href="#Basic functions">basic stream-oriented functions</a>.
+ To simplify the interface, some
+ default options are assumed (compression level and memory usage,
+ standard memory allocation functions). The source code of these
+ utility functions can easily be modified if you need special options.
+<h3> Function list </h3>
+<ul>
+<li> int <a href="#compress">compress</a> (Bytef *dest, uLongf *destLen, const Bytef *source, uLong sourceLen);
+<li> int <a href="#compress2">compress2</a> (Bytef *dest, uLongf *destLen, const Bytef *source, uLong sourceLen, int level);
+<li> int <a href="#uncompress">uncompress</a> (Bytef *dest, uLongf *destLen, const Bytef *source, uLong sourceLen);
+<li> typedef voidp gzFile;
+<li> gzFile <a href="#gzopen">gzopen</a> (const char *path, const char *mode);
+<li> gzFile <a href="#gzdopen">gzdopen</a> (int fd, const char *mode);
+<li> int <a href="#gzsetparams">gzsetparams</a> (gzFile file, int level, int strategy);
+<li> int <a href="#gzread">gzread</a> (gzFile file, voidp buf, unsigned len);
+<li> int <a href="#gzwrite">gzwrite</a> (gzFile file, const voidp buf, unsigned len);
+<li> int VA <a href="#gzprintf">gzprintf</a> (gzFile file, const char *format, ...);
+<li> int <a href="#gzputs">gzputs</a> (gzFile file, const char *s);
+<li> char * <a href="#gzgets">gzgets</a> (gzFile file, char *buf, int len);
+<li> int <a href="#gzputc">gzputc</a> (gzFile file, int c);
+<li> int <a href="#gzgetc">gzgetc</a> (gzFile file);
+<li> int <a href="#gzflush">gzflush</a> (gzFile file, int flush);
+<li> z_off_t <a href="#gzseek">gzseek</a> (gzFile file, z_off_t offset, int whence);
+<li> z_off_t <a href="#gztell">gztell</a> (gzFile file);
+<li> int <a href="#gzrewind">gzrewind</a> (gzFile file);
+<li> int <a href="#gzeof">gzeof</a> (gzFile file);
+<li> int <a href="#gzclose">gzclose</a> (gzFile file);
+<li> const char * <a href="#gzerror">gzerror</a> (gzFile file, int *errnum);
+</ul>
+<h3> Function description </h3>
+<dl>
+<font color="Blue"><dt> int <a name="compress">compress</a> (Bytef *dest, uLongf *destLen, const Bytef *source, uLong sourceLen);</font>
+<dd>
+ Compresses the source buffer into the destination buffer. sourceLen is
+ the byte length of the source buffer. Upon entry, destLen is the total
+ size of the destination buffer, which must be at least 0.1% larger than
+ sourceLen plus 12 bytes. Upon exit, destLen is the actual size of the
+ compressed buffer.<p>
+ This function can be used to <a href="#compress">compress</a> a whole file at once if the
+ input file is mmap'ed.<p>
+ <a href="#compress">compress</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not
+ enough memory, <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a> if there was not enough room in the output
+ buffer.<p>
+
+<font color="Blue"><dt> int <a name="compress2">compress2</a> (Bytef *dest, uLongf *destLen, const Bytef *source, uLong sourceLen, int level);</font>
+<dd>
+ Compresses the source buffer into the destination buffer. The level
+ parameter has the same meaning as in <a href="#deflateInit">deflateInit</a>. sourceLen is the byte
+ length of the source buffer. Upon entry, destLen is the total size of the
+ destination buffer, which must be at least 0.1% larger than sourceLen plus
+ 12 bytes. Upon exit, destLen is the actual size of the compressed buffer.
+ <p>
+
+ <a href="#compress2">compress2</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not enough
+ memory, <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a> if there was not enough room in the output buffer,
+ <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the level parameter is invalid.
+ <p>
+
+<font color="Blue"><dt> int <a name="uncompress">uncompress</a> (Bytef *dest, uLongf *destLen, const Bytef *source, uLong sourceLen);</font>
+<dd>
+ Decompresses the source buffer into the destination buffer. sourceLen is
+ the byte length of the source buffer. Upon entry, destLen is the total
+ size of the destination buffer, which must be large enough to hold the
+ entire uncompressed data. (The size of the uncompressed data must have
+ been saved previously by the compressor and transmitted to the decompressor
+ by some mechanism outside the scope of this compression library.)
+ Upon exit, destLen is the actual size of the compressed buffer. <p>
+ This function can be used to decompress a whole file at once if the
+ input file is mmap'ed.
+ <p>
+
+ <a href="#uncompress">uncompress</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not
+ enough memory, <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a> if there was not enough room in the output
+ buffer, or <a href="#Z_DATA_ERROR">Z_DATA_ERROR</a> if the input data was corrupted.
+ <p>
+
+<dt> typedef voidp gzFile;
+<dd> <p>
+
+<font color="Blue"><dt> gzFile <a name="gzopen">gzopen</a> (const char *path, const char *mode);</font>
+<dd>
+ Opens a gzip (.gz) file for reading or writing. The mode parameter
+ is as in fopen ("rb" or "wb") but can also include a compression level
+ ("wb9") or a strategy: 'f' for filtered data as in "wb6f", 'h' for
+ Huffman only compression as in "wb1h". (See the description
+ of <a href="#deflateInit2">deflateInit2</a> for more information about the strategy parameter.)
+ <p>
+
+ <a href="#gzopen">gzopen</a> can be used to read a file which is not in gzip format ; in this
+ case <a href="#gzread">gzread</a> will directly read from the file without decompression.
+ <p>
+
+ <a href="#gzopen">gzopen</a> returns NULL if the file could not be opened or if there was
+ insufficient memory to allocate the (de)compression <a href="#state">state</a> ; errno
+ can be checked to distinguish the two cases (if errno is zero, the
+ zlib error is <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a>).
+ <p>
+
+<font color="Blue"><dt> gzFile <a name="gzdopen">gzdopen</a> (int fd, const char *mode);</font>
+<dd>
+ <a href="#gzdopen">gzdopen</a>() associates a gzFile with the file descriptor fd. File
+ descriptors are obtained from calls like open, dup, creat, pipe or
+ fileno (in the file has been previously opened with fopen).
+ The mode parameter is as in <a href="#gzopen">gzopen</a>.
+ <p>
+ The next call of <a href="#gzclose">gzclose</a> on the returned gzFile will also close the
+ file descriptor fd, just like fclose(fdopen(fd), mode) closes the file
+ descriptor fd. If you want to keep fd open, use <a href="#gzdopen">gzdopen</a>(dup(fd), mode).
+ <p>
+ <a href="#gzdopen">gzdopen</a> returns NULL if there was insufficient memory to allocate
+ the (de)compression <a href="#state">state</a>.
+ <p>
+
+<font color="Blue"><dt> int <a name="gzsetparams">gzsetparams</a> (gzFile file, int level, int strategy);</font>
+<dd>
+ Dynamically update the compression level or strategy. See the description
+ of <a href="#deflateInit2">deflateInit2</a> for the meaning of these parameters.
+ <p>
+ <a href="#gzsetparams">gzsetparams</a> returns <a href="#Z_OK">Z_OK</a> if success, or <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the file was not
+ opened for writing.
+ <p>
+
+<font color="Blue"><dt> int <a name="gzread">gzread</a> (gzFile file, voidp buf, unsigned len);</font>
+<dd>
+ Reads the given number of uncompressed bytes from the compressed file.
+ If the input file was not in gzip format, <a href="#gzread">gzread</a> copies the given number
+ of bytes into the buffer.
+ <p>
+ <a href="#gzread">gzread</a> returns the number of uncompressed bytes actually read (0 for
+ end of file, -1 for error).
+ <p>
+
+<font color="Blue"><dt> int <a name="gzwrite">gzwrite</a> (gzFile file, const voidp buf, unsigned len);</font>
+<dd>
+ Writes the given number of uncompressed bytes into the compressed file.
+ <a href="#gzwrite">gzwrite</a> returns the number of uncompressed bytes actually written
+ (0 in case of error).
+ <p>
+
+<font color="Blue"><dt> int VA <a name="gzprintf">gzprintf</a> (gzFile file, const char *format, ...);</font>
+<dd>
+ Converts, formats, and writes the args to the compressed file under
+ control of the format string, as in fprintf. <a href="#gzprintf">gzprintf</a> returns the number of
+ uncompressed bytes actually written (0 in case of error).
+ <p>
+
+<font color="Blue"><dt> int <a name="gzputs">gzputs</a> (gzFile file, const char *s);</font>
+<dd>
+ Writes the given null-terminated string to the compressed file, excluding
+ the terminating null character.
+ <p>
+ <a href="#gzputs">gzputs</a> returns the number of characters written, or -1 in case of error.
+ <p>
+
+<font color="Blue"><dt> char * <a name="gzgets">gzgets</a> (gzFile file, char *buf, int len);</font>
+<dd>
+ Reads bytes from the compressed file until len-1 characters are read, or
+ a newline character is read and transferred to buf, or an end-of-file
+ condition is encountered. The string is then terminated with a null
+ character.
+ <p>
+ <a href="#gzgets">gzgets</a> returns buf, or <a href="#Z_NULL">Z_NULL</a> in case of error.
+ <p>
+
+<font color="Blue"><dt> int <a name="gzputc">gzputc</a> (gzFile file, int c);</font>
+<dd>
+ Writes c, converted to an unsigned char, into the compressed file.
+ <a href="#gzputc">gzputc</a> returns the value that was written, or -1 in case of error.
+ <p>
+
+<font color="Blue"><dt> int <a name="gzgetc">gzgetc</a> (gzFile file);</font>
+<dd>
+ Reads one byte from the compressed file. <a href="#gzgetc">gzgetc</a> returns this byte
+ or -1 in case of end of file or error.
+ <p>
+
+<font color="Blue"><dt> int <a name="gzflush">gzflush</a> (gzFile file, int flush);</font>
+<dd>
+ Flushes all pending output into the compressed file. The parameter
+ flush is as in the <a href="#deflate">deflate</a>() function. The return value is the zlib
+ error number (see function <a href="#gzerror">gzerror</a> below). <a href="#gzflush">gzflush</a> returns <a href="#Z_OK">Z_OK</a> if
+ the flush parameter is <a href="#Z_FINISH">Z_FINISH</a> and all output could be flushed.
+ <p>
+ <a href="#gzflush">gzflush</a> should be called only when strictly necessary because it can
+ degrade compression.
+ <p>
+
+<font color="Blue"><dt> z_off_t <a name="gzseek">gzseek</a> (gzFile file, z_off_t offset, int whence);</font>
+<dd>
+ Sets the starting position for the next <a href="#gzread">gzread</a> or <a href="#gzwrite">gzwrite</a> on the
+ given compressed file. The offset represents a number of bytes in the
+ uncompressed data stream. The whence parameter is defined as in lseek(2);
+ the value SEEK_END is not supported.
+ <p>
+ If the file is opened for reading, this function is emulated but can be
+ extremely slow. If the file is opened for writing, only forward seeks are
+ supported ; <a href="#gzseek">gzseek</a> then compresses a sequence of zeroes up to the new
+ starting position.
+ <p>
+ <a href="#gzseek">gzseek</a> returns the resulting offset location as measured in bytes from
+ the beginning of the uncompressed stream, or -1 in case of error, in
+ particular if the file is opened for writing and the new starting position
+ would be before the current position.
+ <p>
+
+<font color="Blue"><dt> int <a name="gzrewind">gzrewind</a> (gzFile file);</font>
+<dd>
+ Rewinds the given file. This function is supported only for reading.
+ <p>
+ <a href="#gzrewind">gzrewind</a>(file) is equivalent to (int)<a href="#gzseek">gzseek</a>(file, 0L, SEEK_SET)
+ <p>
+
+<font color="Blue"><dt> z_off_t <a name="gztell">gztell</a> (gzFile file);</font>
+<dd>
+ Returns the starting position for the next <a href="#gzread">gzread</a> or <a href="#gzwrite">gzwrite</a> on the
+ given compressed file. This position represents a number of bytes in the
+ uncompressed data stream.
+ <p>
+
+ <a href="#gztell">gztell</a>(file) is equivalent to <a href="#gzseek">gzseek</a>(file, 0L, SEEK_CUR)
+ <p>
+
+<font color="Blue"><dt> int <a name="gzeof">gzeof</a> (gzFile file);</font>
+<dd>
+ Returns 1 when EOF has previously been detected reading the given
+ input stream, otherwise zero.
+ <p>
+
+<font color="Blue"><dt> int <a name="gzclose">gzclose</a> (gzFile file);</font>
+<dd>
+ Flushes all pending output if necessary, closes the compressed file
+ and deallocates all the (de)compression <a href="#state">state</a>. The return value is the zlib
+ error number (see function <a href="#gzerror">gzerror</a> below).
+ <p>
+
+<font color="Blue"><dt> const char * <a name="gzerror">gzerror</a> (gzFile file, int *errnum);</font>
+<dd>
+ Returns the error message for the last error which occurred on the
+ given compressed file. errnum is set to zlib error number. If an
+ error occurred in the file system and not in the compression library,
+ errnum is set to <a href="#Z_ERRNO">Z_ERRNO</a> and the application may consult errno
+ to get the exact error code.
+ <p>
+</dl>
+<hr>
+<a name="Basic functions"><h2> Basic functions </h2>
+<h3> Function list </h3>
+<ul>
+<li> const char * <a href="#zlibVersion">zlibVersion</a> (void);
+<li> int <a href="#deflateInit">deflateInit</a> (<a href="#z_streamp">z_streamp</a> strm, int level);
+<li> int <a href="#deflate">deflate</a> (<a href="#z_streamp">z_streamp</a> strm, int flush);
+<li> int <a href="#deflateEnd">deflateEnd</a> (<a href="#z_streamp">z_streamp</a> strm);
+<li> int <a href="#inflateInit">inflateInit</a> (<a href="#z_streamp">z_streamp</a> strm);
+<li> int <a href="#inflate">inflate</a> (<a href="#z_streamp">z_streamp</a> strm, int flush);
+<li> int <a href="#inflateEnd">inflateEnd</a> (<a href="#z_streamp">z_streamp</a> strm);
+</ul>
+
+<h3> Function description </h3>
+<dl>
+<font color="Blue"><dt> const char * <a name="zlibVersion">zlibVersion</a> (void);</font>
+<dd> The application can compare <a href="#zlibVersion">zlibVersion</a> and ZLIB_VERSION for consistency.
+ If the first character differs, the library code actually used is
+ not compatible with the zlib.h header file used by the application.
+ This check is automatically made by <a href="#deflateInit">deflateInit</a> and <a href="#inflateInit">inflateInit</a>.
+ <p>
+
+<font color="Blue"><dt> int <a name="deflateInit">deflateInit</a> (<a href="#z_streamp">z_streamp</a> strm, int level);</font>
+<dd>
+ Initializes the internal stream <a href="#state">state</a> for compression. The fields
+ <a href="#zalloc">zalloc</a>, <a href="#zfree">zfree</a> and <a href="#opaque">opaque</a> must be initialized before by the caller.
+ If <a href="#zalloc">zalloc</a> and <a href="#zfree">zfree</a> are set to <a href="#Z_NULL">Z_NULL</a>, <a href="#deflateInit">deflateInit</a> updates them to
+ use default allocation functions.
+ <p>
+
+ The compression level must be <a href="#Z_DEFAULT_COMPRESSION">Z_DEFAULT_COMPRESSION</a>, or between 0 and 9:
+ 1 gives best speed, 9 gives best compression, 0 gives no compression at
+ all (the input data is simply copied a block at a time).
+ <p>
+
+ <a href="#Z_DEFAULT_COMPRESSION">Z_DEFAULT_COMPRESSION</a> requests a default compromise between speed and
+ compression (currently equivalent to level 6).
+ <p>
+
+ <a href="#deflateInit">deflateInit</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not
+ enough memory, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if level is not a valid compression level,
+ <a href="#Z_VERSION_ERROR">Z_VERSION_ERROR</a> if the zlib library version (<a href="#zlib_version">zlib_version</a>) is incompatible
+ with the version assumed by the caller (ZLIB_VERSION).
+ <a href="#msg">msg</a> is set to null if there is no error message. <a href="#deflateInit">deflateInit</a> does not
+ perform any compression: this will be done by <a href="#deflate">deflate</a>().
+ <p>
+
+<font color="Blue"><dt> int <a name="deflate">deflate</a> (<a href="#z_streamp">z_streamp</a> strm, int flush);</font>
+<dd>
+ <a href="#deflate">deflate</a> compresses as much data as possible, and stops when the input
+ buffer becomes empty or the output buffer becomes full. It may introduce some
+ output latency (reading input without producing any output) except when
+ forced to flush.<p>
+
+ The detailed semantics are as follows. <a href="#deflate">deflate</a> performs one or both of the
+ following actions:
+
+ <ul>
+ <li> Compress more input starting at <a href="#next_in">next_in</a> and update <a href="#next_in">next_in</a> and <a href="#avail_in">avail_in</a>
+ accordingly. If not all input can be processed (because there is not
+ enough room in the output buffer), <a href="#next_in">next_in</a> and <a href="#avail_in">avail_in</a> are updated and
+ processing will resume at this point for the next call of <a href="#deflate">deflate</a>().
+
+ <li>
+ Provide more output starting at <a href="#next_out">next_out</a> and update <a href="#next_out">next_out</a> and <a href="#avail_out">avail_out</a>
+ accordingly. This action is forced if the parameter flush is non zero.
+ Forcing flush frequently degrades the compression ratio, so this parameter
+ should be set only when necessary (in interactive applications).
+ Some output may be provided even if flush is not set.
+ </ul> <p>
+
+ Before the call of <a href="#deflate">deflate</a>(), the application should ensure that at least
+ one of the actions is possible, by providing more input and/or consuming
+ more output, and updating <a href="#avail_in">avail_in</a> or <a href="#avail_out">avail_out</a> accordingly ; <a href="#avail_out">avail_out</a>
+ should never be zero before the call. The application can consume the
+ compressed output when it wants, for example when the output buffer is full
+ (<a href="#avail_out">avail_out</a> == 0), or after each call of <a href="#deflate">deflate</a>(). If <a href="#deflate">deflate</a> returns <a href="#Z_OK">Z_OK</a>
+ and with zero <a href="#avail_out">avail_out</a>, it must be called again after making room in the
+ output buffer because there might be more output pending.
+ <p>
+
+ If the parameter flush is set to <a href="#Z_SYNC_FLUSH">Z_SYNC_FLUSH</a>, all pending output is
+ flushed to the output buffer and the output is aligned on a byte boundary, so
+ that the decompressor can get all input data available so far. (In particular
+ <a href="#avail_in">avail_in</a> is zero after the call if enough output space has been provided
+ before the call.) Flushing may degrade compression for some compression
+ algorithms and so it should be used only when necessary.
+ <p>
+
+ If flush is set to <a href="#Z_FULL_FLUSH">Z_FULL_FLUSH</a>, all output is flushed as with
+ <a href="#Z_SYNC_FLUSH">Z_SYNC_FLUSH</a>, and the compression <a href="#state">state</a> is reset so that decompression can
+ restart from this point if previous compressed data has been damaged or if
+ random access is desired. Using <a href="#Z_FULL_FLUSH">Z_FULL_FLUSH</a> too often can seriously degrade
+ the compression.
+ <p>
+
+ If <a href="#deflate">deflate</a> returns with <a href="#avail_out">avail_out</a> == 0, this function must be called again
+ with the same value of the flush parameter and more output space (updated
+ <a href="#avail_out">avail_out</a>), until the flush is complete (<a href="#deflate">deflate</a> returns with non-zero
+ <a href="#avail_out">avail_out</a>).
+ <p>
+
+ If the parameter flush is set to <a href="#Z_FINISH">Z_FINISH</a>, pending input is processed,
+ pending output is flushed and <a href="#deflate">deflate</a> returns with <a href="#Z_STREAM_END">Z_STREAM_END</a> if there
+ was enough output space ; if <a href="#deflate">deflate</a> returns with <a href="#Z_OK">Z_OK</a>, this function must be
+ called again with <a href="#Z_FINISH">Z_FINISH</a> and more output space (updated <a href="#avail_out">avail_out</a>) but no
+ more input data, until it returns with <a href="#Z_STREAM_END">Z_STREAM_END</a> or an error. After
+ <a href="#deflate">deflate</a> has returned <a href="#Z_STREAM_END">Z_STREAM_END</a>, the only possible operations on the
+ stream are <a href="#deflateReset">deflateReset</a> or <a href="#deflateEnd">deflateEnd</a>.
+ <p>
+
+ <a href="#Z_FINISH">Z_FINISH</a> can be used immediately after <a href="#deflateInit">deflateInit</a> if all the compression
+ is to be done in a single step. In this case, <a href="#avail_out">avail_out</a> must be at least
+ 0.1% larger than <a href="#avail_in">avail_in</a> plus 12 bytes. If <a href="#deflate">deflate</a> does not return
+ <a href="#Z_STREAM_END">Z_STREAM_END</a>, then it must be called again as described above.
+ <p>
+
+ <a href="#deflate">deflate</a>() sets strm-&gt <a href="#adler">adler</a> to the <a href="#adler32">adler32</a> checksum of all input read
+ so far (that is, <a href="#total_in">total_in</a> bytes).
+ <p>
+
+ <a href="#deflate">deflate</a>() may update <a href="#data_type">data_type</a> if it can make a good guess about
+ the input data type (<a href="#Z_ASCII">Z_ASCII</a> or <a href="#Z_BINARY">Z_BINARY</a>). In doubt, the data is considered
+ binary. This field is only for information purposes and does not affect
+ the compression algorithm in any manner.
+ <p>
+
+ <a href="#deflate">deflate</a>() returns <a href="#Z_OK">Z_OK</a> if some progress has been made (more input
+ processed or more output produced), <a href="#Z_STREAM_END">Z_STREAM_END</a> if all input has been
+ consumed and all output has been produced (only when flush is set to
+ <a href="#Z_FINISH">Z_FINISH</a>), <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the stream <a href="#state">state</a> was inconsistent (for example
+ if <a href="#next_in">next_in</a> or <a href="#next_out">next_out</a> was NULL), <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a> if no progress is possible
+ (for example <a href="#avail_in">avail_in</a> or <a href="#avail_out">avail_out</a> was zero).
+ <p>
+
+<font color="Blue"><dt> int <a name="deflateEnd">deflateEnd</a> (<a href="#z_streamp">z_streamp</a> strm);</font>
+<dd>
+ All dynamically allocated data structures for this stream are freed.
+ This function discards any unprocessed input and does not flush any
+ pending output.
+ <p>
+
+ <a href="#deflateEnd">deflateEnd</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the
+ stream <a href="#state">state</a> was inconsistent, <a href="#Z_DATA_ERROR">Z_DATA_ERROR</a> if the stream was freed
+ prematurely (some input or output was discarded). In the error case,
+ <a href="#msg">msg</a> may be set but then points to a static string (which must not be
+ deallocated).
+ <p>
+
+<font color="Blue"><dt> int <a name="inflateInit">inflateInit</a> (<a href="#z_streamp">z_streamp</a> strm);</font>
+<dd>
+ Initializes the internal stream <a href="#state">state</a> for decompression. The fields
+ <a href="#next_in">next_in</a>, <a href="#avail_in">avail_in</a>, <a href="#zalloc">zalloc</a>, <a href="#zfree">zfree</a> and <a href="#opaque">opaque</a> must be initialized before by
+ the caller. If <a href="#next_in">next_in</a> is not <a href="#Z_NULL">Z_NULL</a> and <a href="#avail_in">avail_in</a> is large enough (the exact
+ value depends on the compression method), <a href="#inflateInit">inflateInit</a> determines the
+ compression method from the zlib header and allocates all data structures
+ accordingly ; otherwise the allocation will be deferred to the first call of
+ <a href="#inflate">inflate</a>. If <a href="#zalloc">zalloc</a> and <a href="#zfree">zfree</a> are set to <a href="#Z_NULL">Z_NULL</a>, <a href="#inflateInit">inflateInit</a> updates them to
+ use default allocation functions.
+ <p>
+
+ <a href="#inflateInit">inflateInit</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not enough
+ memory, <a href="#Z_VERSION_ERROR">Z_VERSION_ERROR</a> if the zlib library version is incompatible with the
+ version assumed by the caller. <a href="#msg">msg</a> is set to null if there is no error
+ message. <a href="#inflateInit">inflateInit</a> does not perform any decompression apart from reading
+ the zlib header if present: this will be done by <a href="#inflate">inflate</a>(). (So <a href="#next_in">next_in</a> and
+ <a href="#avail_in">avail_in</a> may be modified, but <a href="#next_out">next_out</a> and <a href="#avail_out">avail_out</a> are unchanged.)
+ <p>
+
+<font color="Blue"><dt> int <a name="inflate">inflate</a> (<a href="#z_streamp">z_streamp</a> strm, int flush);</font>
+<dd>
+ <a href="#inflate">inflate</a> decompresses as much data as possible, and stops when the input
+ buffer becomes empty or the output buffer becomes full. It may some
+ introduce some output latency (reading input without producing any output)
+ except when forced to flush.
+ <p>
+
+ The detailed semantics are as follows. <a href="#inflate">inflate</a> performs one or both of the
+ following actions:
+
+ <ul>
+ <li> Decompress more input starting at <a href="#next_in">next_in</a> and update <a href="#next_in">next_in</a> and <a href="#avail_in">avail_in</a>
+ accordingly. If not all input can be processed (because there is not
+ enough room in the output buffer), <a href="#next_in">next_in</a> is updated and processing
+ will resume at this point for the next call of <a href="#inflate">inflate</a>().
+
+ <li> Provide more output starting at <a href="#next_out">next_out</a> and update <a href="#next_out">next_out</a> and
+ <a href="#avail_out">avail_out</a> accordingly. <a href="#inflate">inflate</a>() provides as much output as possible,
+ until there is no more input data or no more space in the output buffer
+ (see below about the flush parameter).
+ </ul> <p>
+
+ Before the call of <a href="#inflate">inflate</a>(), the application should ensure that at least
+ one of the actions is possible, by providing more input and/or consuming
+ more output, and updating the next_* and avail_* values accordingly.
+ The application can consume the uncompressed output when it wants, for
+ example when the output buffer is full (<a href="#avail_out">avail_out</a> == 0), or after each
+ call of <a href="#inflate">inflate</a>(). If <a href="#inflate">inflate</a> returns <a href="#Z_OK">Z_OK</a> and with zero <a href="#avail_out">avail_out</a>, it
+ must be called again after making room in the output buffer because there
+ might be more output pending.
+ <p>
+
+ If the parameter flush is set to <a href="#Z_SYNC_FLUSH">Z_SYNC_FLUSH</a>, <a href="#inflate">inflate</a> flushes as much
+ output as possible to the output buffer. The flushing behavior of <a href="#inflate">inflate</a> is
+ not specified for values of the flush parameter other than <a href="#Z_SYNC_FLUSH">Z_SYNC_FLUSH</a>
+ and <a href="#Z_FINISH">Z_FINISH</a>, but the current implementation actually flushes as much output
+ as possible anyway.
+ <p>
+
+ <a href="#inflate">inflate</a>() should normally be called until it returns <a href="#Z_STREAM_END">Z_STREAM_END</a> or an
+ error. However if all decompression is to be performed in a single step
+ (a single call of <a href="#inflate">inflate</a>), the parameter flush should be set to
+ <a href="#Z_FINISH">Z_FINISH</a>. In this case all pending input is processed and all pending
+ output is flushed ; <a href="#avail_out">avail_out</a> must be large enough to hold all the
+ uncompressed data. (The size of the uncompressed data may have been saved
+ by the compressor for this purpose.) The next operation on this stream must
+ be <a href="#inflateEnd">inflateEnd</a> to deallocate the decompression <a href="#state">state</a>. The use of <a href="#Z_FINISH">Z_FINISH</a>
+ is never required, but can be used to inform <a href="#inflate">inflate</a> that a faster routine
+ may be used for the single <a href="#inflate">inflate</a>() call.
+ <p>
+
+ If a preset dictionary is needed at this point (see <a href="#inflateSetDictionary">inflateSetDictionary</a>
+ below), <a href="#inflate">inflate</a> sets strm-<a href="#adler">adler</a> to the <a href="#adler32">adler32</a> checksum of the
+ dictionary chosen by the compressor and returns <a href="#Z_NEED_DICT">Z_NEED_DICT</a> ; otherwise
+ it sets strm-&gt <a href="#adler">adler</a> to the <a href="#adler32">adler32</a> checksum of all output produced
+ so far (that is, <a href="#total_out">total_out</a> bytes) and returns <a href="#Z_OK">Z_OK</a>, <a href="#Z_STREAM_END">Z_STREAM_END</a> or
+ an error code as described below. At the end of the stream, <a href="#inflate">inflate</a>()
+ checks that its computed <a href="#adler32">adler32</a> checksum is equal to that saved by the
+ compressor and returns <a href="#Z_STREAM_END">Z_STREAM_END</a> only if the checksum is correct.
+ <p>
+
+ <a href="#inflate">inflate</a>() returns <a href="#Z_OK">Z_OK</a> if some progress has been made (more input processed
+ or more output produced), <a href="#Z_STREAM_END">Z_STREAM_END</a> if the end of the compressed data has
+ been reached and all uncompressed output has been produced, <a href="#Z_NEED_DICT">Z_NEED_DICT</a> if a
+ preset dictionary is needed at this point, <a href="#Z_DATA_ERROR">Z_DATA_ERROR</a> if the input data was
+ corrupted (input stream not conforming to the zlib format or incorrect
+ <a href="#adler32">adler32</a> checksum), <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the stream structure was inconsistent
+ (for example if <a href="#next_in">next_in</a> or <a href="#next_out">next_out</a> was NULL), <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not
+ enough memory, <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a> if no progress is possible or if there was not
+ enough room in the output buffer when <a href="#Z_FINISH">Z_FINISH</a> is used. In the <a href="#Z_DATA_ERROR">Z_DATA_ERROR</a>
+ case, the application may then call <a href="#inflateSync">inflateSync</a> to look for a good
+ compression block.
+ <p>
+
+<font color="Blue"><dt> int <a name="inflateEnd">inflateEnd</a> (<a href="#z_streamp">z_streamp</a> strm);</font>
+<dd>
+ All dynamically allocated data structures for this stream are freed.
+ This function discards any unprocessed input and does not flush any
+ pending output.
+ <p>
+
+ <a href="#inflateEnd">inflateEnd</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the stream <a href="#state">state</a>
+ was inconsistent. In the error case, <a href="#msg">msg</a> may be set but then points to a
+ static string (which must not be deallocated).
+</dl>
+<hr>
+<a name="Advanced functions"><h2> Advanced functions </h2>
+ The following functions are needed only in some special applications.
+<h3> Function list </h3>
+<ul>
+<li> int <a href="#deflateInit2">deflateInit2</a> (<a href="#z_streamp">z_streamp</a> strm,
+<li> int <a href="#deflateSetDictionary">deflateSetDictionary</a> (<a href="#z_streamp">z_streamp</a> strm, const Bytef *dictionary, uInt dictLength);
+<li> int <a href="#deflateCopy">deflateCopy</a> (<a href="#z_streamp">z_streamp</a> dest, <a href="#z_streamp">z_streamp</a> source);
+<li> int <a href="#deflateReset">deflateReset</a> (<a href="#z_streamp">z_streamp</a> strm);
+<li> int <a href="#deflateParams">deflateParams</a> (<a href="#z_streamp">z_streamp</a> strm, int level, int strategy);
+<li> int <a href="#inflateInit2">inflateInit2</a> (<a href="#z_streamp">z_streamp</a> strm, int windowBits);
+<li> int <a href="#inflateSetDictionary">inflateSetDictionary</a> (<a href="#z_streamp">z_streamp</a> strm, const Bytef *dictionary, uInt dictLength);
+<li> int <a href="#inflateSync">inflateSync</a> (<a href="#z_streamp">z_streamp</a> strm);
+<li> int <a href="#inflateReset">inflateReset</a> (<a href="#z_streamp">z_streamp</a> strm);
+
+</ul>
+<h3> Function description </h3>
+<dl>
+<font color="Blue"><dt> int <a name="deflateInit2">deflateInit2</a> (<a href="#z_streamp">z_streamp</a> strm, int level, int method, int windowBits, int memLevel, int strategy);</font>
+
+<dd> This is another version of <a href="#deflateInit">deflateInit</a> with more compression options. The
+ fields <a href="#next_in">next_in</a>, <a href="#zalloc">zalloc</a>, <a href="#zfree">zfree</a> and <a href="#opaque">opaque</a> must be initialized before by
+ the caller.<p>
+
+ The method parameter is the compression method. It must be <a href="#Z_DEFLATED">Z_DEFLATED</a> in
+ this version of the library.<p>
+
+ The windowBits parameter is the base two logarithm of the window size
+ (the size of the history buffer). It should be in the range 8..15 for this
+ version of the library. Larger values of this parameter result in better
+ compression at the expense of memory usage. The default value is 15 if
+ <a href="#deflateInit">deflateInit</a> is used instead.<p>
+
+ The memLevel parameter specifies how much memory should be allocated
+ for the internal compression <a href="#state">state</a>. memLevel=1 uses minimum memory but
+ is slow and reduces compression ratio ; memLevel=9 uses maximum memory
+ for optimal speed. The default value is 8. See zconf.h for total memory
+ usage as a function of windowBits and memLevel.<p>
+
+ The strategy parameter is used to tune the compression algorithm. Use the
+ value <a href="#Z_DEFAULT_STRATEGY">Z_DEFAULT_STRATEGY</a> for normal data, <a href="#Z_FILTERED">Z_FILTERED</a> for data produced by a
+ filter (or predictor), or <a href="#Z_HUFFMAN_ONLY">Z_HUFFMAN_ONLY</a> to force Huffman encoding only (no
+ string match). Filtered data consists mostly of small values with a
+ somewhat random distribution. In this case, the compression algorithm is
+ tuned to <a href="#compress">compress</a> them better. The effect of <a href="#Z_FILTERED">Z_FILTERED</a> is to force more
+ Huffman coding and less string matching ; it is somewhat intermediate
+ between Z_DEFAULT and <a href="#Z_HUFFMAN_ONLY">Z_HUFFMAN_ONLY</a>. The strategy parameter only affects
+ the compression ratio but not the correctness of the compressed output even
+ if it is not set appropriately.<p>
+
+ <a href="#deflateInit2">deflateInit2</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not enough
+ memory, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if a parameter is invalid (such as an invalid
+ method). <a href="#msg">msg</a> is set to null if there is no error message. <a href="#deflateInit2">deflateInit2</a> does
+ not perform any compression: this will be done by <a href="#deflate">deflate</a>().<p>
+
+<font color="Blue"><dt> int <a name="deflateSetDictionary">deflateSetDictionary</a> (<a href="#z_streamp">z_streamp</a> strm, const Bytef *dictionary, uInt dictLength);</font>
+<dd>
+ Initializes the compression dictionary from the given byte sequence
+ without producing any compressed output. This function must be called
+ immediately after <a href="#deflateInit">deflateInit</a>, <a href="#deflateInit2">deflateInit2</a> or <a href="#deflateReset">deflateReset</a>, before any
+ call of <a href="#deflate">deflate</a>. The compressor and decompressor must use exactly the same
+ dictionary (see <a href="#inflateSetDictionary">inflateSetDictionary</a>).<p>
+
+ The dictionary should consist of strings (byte sequences) that are likely
+ to be encountered later in the data to be compressed, with the most commonly
+ used strings preferably put towards the end of the dictionary. Using a
+ dictionary is most useful when the data to be compressed is short and can be
+ predicted with good accuracy ; the data can then be compressed better than
+ with the default empty dictionary.<p>
+
+ Depending on the size of the compression data structures selected by
+ <a href="#deflateInit">deflateInit</a> or <a href="#deflateInit2">deflateInit2</a>, a part of the dictionary may in effect be
+ discarded, for example if the dictionary is larger than the window size in
+ <a href="#deflate">deflate</a> or deflate2. Thus the strings most likely to be useful should be
+ put at the end of the dictionary, not at the front.<p>
+
+ Upon return of this function, strm-&gt <a href="#adler">adler</a> is set to the Adler32 value
+ of the dictionary ; the decompressor may later use this value to determine
+ which dictionary has been used by the compressor. (The Adler32 value
+ applies to the whole dictionary even if only a subset of the dictionary is
+ actually used by the compressor.)<p>
+
+ <a href="#deflateSetDictionary">deflateSetDictionary</a> returns <a href="#Z_OK">Z_OK</a> if success, or <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if a
+ parameter is invalid (such as NULL dictionary) or the stream <a href="#state">state</a> is
+ inconsistent (for example if <a href="#deflate">deflate</a> has already been called for this stream
+ or if the compression method is bsort). <a href="#deflateSetDictionary">deflateSetDictionary</a> does not
+ perform any compression: this will be done by <a href="#deflate">deflate</a>().<p>
+
+<font color="Blue"><dt> int <a name="deflateCopy">deflateCopy</a> (<a href="#z_streamp">z_streamp</a> dest, <a href="#z_streamp">z_streamp</a> source);</font>
+<dd>
+ Sets the destination stream as a complete copy of the source stream.<p>
+
+ This function can be useful when several compression strategies will be
+ tried, for example when there are several ways of pre-processing the input
+ data with a filter. The streams that will be discarded should then be freed
+ by calling <a href="#deflateEnd">deflateEnd</a>. Note that <a href="#deflateCopy">deflateCopy</a> duplicates the internal
+ compression <a href="#state">state</a> which can be quite large, so this strategy is slow and
+ can consume lots of memory.<p>
+
+ <a href="#deflateCopy">deflateCopy</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not
+ enough memory, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the source stream <a href="#state">state</a> was inconsistent
+ (such as <a href="#zalloc">zalloc</a> being NULL). <a href="#msg">msg</a> is left unchanged in both source and
+ destination.<p>
+
+<font color="Blue"><dt> int <a name="deflateReset">deflateReset</a> (<a href="#z_streamp">z_streamp</a> strm);</font>
+<dd> This function is equivalent to <a href="#deflateEnd">deflateEnd</a> followed by <a href="#deflateInit">deflateInit</a>,
+ but does not free and reallocate all the internal compression <a href="#state">state</a>.
+ The stream will keep the same compression level and any other attributes
+ that may have been set by <a href="#deflateInit2">deflateInit2</a>.<p>
+
+ <a href="#deflateReset">deflateReset</a> returns <a href="#Z_OK">Z_OK</a> if success, or <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the source
+ stream <a href="#state">state</a> was inconsistent (such as <a href="#zalloc">zalloc</a> or <a href="#state">state</a> being NULL).<p>
+
+<font color="Blue"><dt> int <a name="deflateParams">deflateParams</a> (<a href="#z_streamp">z_streamp</a> strm, int level, int strategy);</font>
+<dd>
+ Dynamically update the compression level and compression strategy. The
+ interpretation of level and strategy is as in <a href="#deflateInit2">deflateInit2</a>. This can be
+ used to switch between compression and straight copy of the input data, or
+ to switch to a different kind of input data requiring a different
+ strategy. If the compression level is changed, the input available so far
+ is compressed with the old level (and may be flushed); the new level will
+ take effect only at the next call of <a href="#deflate">deflate</a>().<p>
+
+ Before the call of <a href="#deflateParams">deflateParams</a>, the stream <a href="#state">state</a> must be set as for
+ a call of <a href="#deflate">deflate</a>(), since the currently available input may have to
+ be compressed and flushed. In particular, strm-&gt <a href="#avail_out">avail_out</a> must be
+ non-zero.<p>
+
+ <a href="#deflateParams">deflateParams</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the source
+ stream <a href="#state">state</a> was inconsistent or if a parameter was invalid, <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a>
+ if strm-&gtavail_out was zero.<p>
+
+<font color="Blue"><dt> int <a name="inflateInit2">inflateInit2</a> (<a href="#z_streamp">z_streamp</a> strm, int windowBits);</font>
+
+<dd> This is another version of <a href="#inflateInit">inflateInit</a> with an extra parameter. The
+ fields <a href="#next_in">next_in</a>, <a href="#avail_in">avail_in</a>, <a href="#zalloc">zalloc</a>, <a href="#zfree">zfree</a> and <a href="#opaque">opaque</a> must be initialized
+ before by the caller.<p>
+
+ The windowBits parameter is the base two logarithm of the maximum window
+ size (the size of the history buffer). It should be in the range 8..15 for
+ this version of the library. The default value is 15 if <a href="#inflateInit">inflateInit</a> is used
+ instead. If a compressed stream with a larger window size is given as
+ input, <a href="#inflate">inflate</a>() will return with the error code <a href="#Z_DATA_ERROR">Z_DATA_ERROR</a> instead of
+ trying to allocate a larger window.<p>
+
+ <a href="#inflateInit2">inflateInit2</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not enough
+ memory, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if a parameter is invalid (such as a negative
+ memLevel). <a href="#msg">msg</a> is set to null if there is no error message. <a href="#inflateInit2">inflateInit2</a>
+ does not perform any decompression apart from reading the zlib header if
+ present: this will be done by <a href="#inflate">inflate</a>(). (So <a href="#next_in">next_in</a> and <a href="#avail_in">avail_in</a> may be
+ modified, but <a href="#next_out">next_out</a> and <a href="#avail_out">avail_out</a> are unchanged.)<p>
+
+<font color="Blue"><dt> int <a name="inflateSetDictionary">inflateSetDictionary</a> (<a href="#z_streamp">z_streamp</a> strm, const Bytef *dictionary, uInt dictLength);</font>
+<dd>
+ Initializes the decompression dictionary from the given uncompressed byte
+ sequence. This function must be called immediately after a call of <a href="#inflate">inflate</a>
+ if this call returned <a href="#Z_NEED_DICT">Z_NEED_DICT</a>. The dictionary chosen by the compressor
+ can be determined from the Adler32 value returned by this call of
+ <a href="#inflate">inflate</a>. The compressor and decompressor must use exactly the same
+ dictionary (see <a href="#deflateSetDictionary">deflateSetDictionary</a>).<p>
+
+ <a href="#inflateSetDictionary">inflateSetDictionary</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if a
+ parameter is invalid (such as NULL dictionary) or the stream <a href="#state">state</a> is
+ inconsistent, <a href="#Z_DATA_ERROR">Z_DATA_ERROR</a> if the given dictionary doesn't match the
+ expected one (incorrect Adler32 value). <a href="#inflateSetDictionary">inflateSetDictionary</a> does not
+ perform any decompression: this will be done by subsequent calls of
+ <a href="#inflate">inflate</a>().<p>
+
+<font color="Blue"><dt> int <a name="inflateSync">inflateSync</a> (<a href="#z_streamp">z_streamp</a> strm);</font>
+
+<dd> Skips invalid compressed data until a full flush point (see above the
+ description of <a href="#deflate">deflate</a> with <a href="#Z_FULL_FLUSH">Z_FULL_FLUSH</a>) can be found, or until all
+ available input is skipped. No output is provided.<p>
+
+ <a href="#inflateSync">inflateSync</a> returns <a href="#Z_OK">Z_OK</a> if a full flush point has been found, <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a>
+ if no more input was provided, <a href="#Z_DATA_ERROR">Z_DATA_ERROR</a> if no flush point has been found,
+ or <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the stream structure was inconsistent. In the success
+ case, the application may save the current current value of <a href="#total_in">total_in</a> which
+ indicates where valid compressed data was found. In the error case, the
+ application may repeatedly call <a href="#inflateSync">inflateSync</a>, providing more input each time,
+ until success or end of the input data.<p>
+
+<font color="Blue"><dt> int <a name="inflateReset">inflateReset</a> (<a href="#z_streamp">z_streamp</a> strm);</font>
+<dd>
+ This function is equivalent to <a href="#inflateEnd">inflateEnd</a> followed by <a href="#inflateInit">inflateInit</a>,
+ but does not free and reallocate all the internal decompression <a href="#state">state</a>.
+ The stream will keep attributes that may have been set by <a href="#inflateInit2">inflateInit2</a>.
+ <p>
+
+ <a href="#inflateReset">inflateReset</a> returns <a href="#Z_OK">Z_OK</a> if success, or <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the source
+ stream <a href="#state">state</a> was inconsistent (such as <a href="#zalloc">zalloc</a> or <a href="#state">state</a> being NULL).
+ <p>
+</dl>
+
+<hr>
+<a name="Checksum functions"><h2> Checksum functions </h2>
+ These functions are not related to compression but are exported
+ anyway because they might be useful in applications using the
+ compression library.
+<h3> Function list </h3>
+<ul>
+<li> uLong <a href="#adler32">adler32</a> (uLong <a href="#adler">adler</a>, const Bytef *buf, uInt len);
+<li> uLong <a href="#crc32">crc32</a> (uLong crc, const Bytef *buf, uInt len);
+</ul>
+<h3> Function description </h3>
+<dl>
+<font color="Blue"><dt> uLong <a name="adler32">adler32</a> (uLong <a href="#adler">adler</a>, const Bytef *buf, uInt len);</font>
+<dd>
+ Update a running Adler-32 checksum with the bytes buf[0..len-1] and
+ return the updated checksum. If buf is NULL, this function returns
+ the required initial value for the checksum.
+ <p>
+ An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
+ much faster. Usage example:
+ <pre>
+
+ uLong <a href="#adler">adler</a> = <a href="#adler32">adler32</a>(0L, <a href="#Z_NULL">Z_NULL</a>, 0);
+
+ while (read_buffer(buffer, length) != EOF) {
+ <a href="#adler">adler</a> = <a href="#adler32">adler32</a>(<a href="#adler">adler</a>, buffer, length);
+ }
+ if (<a href="#adler">adler</a> != original_adler) error();
+ </pre>
+
+<font color="Blue"><dt> uLong <a name="crc32">crc32</a> (uLong crc, const Bytef *buf, uInt len);</font>
+<dd>
+ Update a running crc with the bytes buf[0..len-1] and return the updated
+ crc. If buf is NULL, this function returns the required initial value
+ for the crc. Pre- and post-conditioning (one's complement) is performed
+ within this function so it shouldn't be done by the application.
+ Usage example:
+ <pre>
+
+ uLong crc = <a href="#crc32">crc32</a>(0L, <a href="#Z_NULL">Z_NULL</a>, 0);
+
+ while (read_buffer(buffer, length) != EOF) {
+ crc = <a href="#crc32">crc32</a>(crc, buffer, length);
+ }
+ if (crc != original_crc) error();
+ </pre>
+</dl>
+<hr>
+<a name="struct z_stream_s"><h2> struct z_stream_s </h2>
+<font color="Blue">
+<a name="z_stream_s">
+<pre>
+typedef struct z_stream_s {
+ Bytef *<a name="next_in">next_in</a>; /* next input byte */
+ uInt <a name="avail_in">avail_in</a>; /* number of bytes available at <a href="#next_in">next_in</a> */
+ uLong <a name="total_in">total_in</a>; /* total nb of input bytes read so far */
+
+ Bytef *<a name="next_out">next_out</a>; /* next output byte should be put there */
+ uInt <a name="avail_out">avail_out</a>; /* remaining free space at <a href="#next_out">next_out</a> */
+ uLong <a name="total_out">total_out</a>; /* total nb of bytes output so far */
+
+ char *<a name="msg">msg</a>; /* last error message, NULL if no error */
+ struct internal_state FAR *<a name="state">state</a>; /* not visible by applications */
+
+ alloc_func <a name="zalloc">zalloc</a>; /* used to allocate the internal <a href="#state">state</a> */
+ free_func <a name="zfree">zfree</a>; /* used to free the internal <a href="#state">state</a> */
+ voidpf <a name="opaque">opaque</a>; /* private data object passed to <a href="#zalloc">zalloc</a> and <a href="#zfree">zfree</a> */
+
+ int <a name="data_type">data_type</a>; /* best guess about the data type: ascii or binary */
+ uLong <a name="adler">adler</a>; /* <a href="#adler32">adler32</a> value of the uncompressed data */
+ uLong <a name="reserved">reserved</a>; /* <a href="#reserved">reserved</a> for future use */
+} <a href="#z_stream_s">z_stream</a> ;
+
+typedef <a href="#z_stream_s">z_stream</a> FAR * <a name="z_streamp">z_streamp</a>; ÿ
+</pre>
+</font>
+ The application must update <a href="#next_in">next_in</a> and <a href="#avail_in">avail_in</a> when <a href="#avail_in">avail_in</a> has
+ dropped to zero. It must update <a href="#next_out">next_out</a> and <a href="#avail_out">avail_out</a> when <a href="#avail_out">avail_out</a>
+ has dropped to zero. The application must initialize <a href="#zalloc">zalloc</a>, <a href="#zfree">zfree</a> and
+ <a href="#opaque">opaque</a> before calling the init function. All other fields are set by the
+ compression library and must not be updated by the application. <p>
+
+ The <a href="#opaque">opaque</a> value provided by the application will be passed as the first
+ parameter for calls of <a href="#zalloc">zalloc</a> and <a href="#zfree">zfree</a>. This can be useful for custom
+ memory management. The compression library attaches no meaning to the
+ <a href="#opaque">opaque</a> value. <p>
+
+ <a href="#zalloc">zalloc</a> must return <a href="#Z_NULL">Z_NULL</a> if there is not enough memory for the object.
+ If zlib is used in a multi-threaded application, <a href="#zalloc">zalloc</a> and <a href="#zfree">zfree</a> must be
+ thread safe. <p>
+
+ On 16-bit systems, the functions <a href="#zalloc">zalloc</a> and <a href="#zfree">zfree</a> must be able to allocate
+ exactly 65536 bytes, but will not be required to allocate more than this
+ if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS,
+ pointers returned by <a href="#zalloc">zalloc</a> for objects of exactly 65536 bytes *must*
+ have their offset normalized to zero. The default allocation function
+ provided by this library ensures this (see zutil.c). To reduce memory
+ requirements and avoid any allocation of 64K objects, at the expense of
+ compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h).
+ <p>
+
+ The fields <a href="#total_in">total_in</a> and <a href="#total_out">total_out</a> can be used for statistics or
+ progress reports. After compression, <a href="#total_in">total_in</a> holds the total size of
+ the uncompressed data and may be saved for use in the decompressor
+ (particularly if the decompressor wants to decompress everything in
+ a single step). <p>
+
+<hr>
+<a name="Constants"><h2> Constants </h2>
+<font color="Blue">
+<pre>
+#define <a name="Z_NO_FLUSH">Z_NO_FLUSH</a> 0
+#define <a name="Z_PARTIAL_FLUSH">Z_PARTIAL_FLUSH</a> 1
+ /* will be removed, use <a href="#Z_SYNC_FLUSH">Z_SYNC_FLUSH</a> instead */
+#define <a name="Z_SYNC_FLUSH">Z_SYNC_FLUSH</a> 2
+#define <a name="Z_FULL_FLUSH">Z_FULL_FLUSH</a> 3
+#define <a name="Z_FINISH">Z_FINISH</a> 4
+/* Allowed flush values ; see <a href="#deflate">deflate</a>() below for details */
+
+#define <a name="Z_OK">Z_OK</a> 0
+#define <a name="Z_STREAM_END">Z_STREAM_END</a> 1
+#define <a name="Z_NEED_DICT">Z_NEED_DICT</a> 2
+#define <a name="Z_ERRNO">Z_ERRNO</a> (-1)
+#define <a name="Z_STREAM_ERROR">Z_STREAM_ERROR</a> (-2)
+#define <a name="Z_DATA_ERROR">Z_DATA_ERROR</a> (-3)
+#define <a name="Z_MEM_ERROR">Z_MEM_ERROR</a> (-4)
+#define <a name="Z_BUF_ERROR">Z_BUF_ERROR</a> (-5)
+#define <a name="Z_VERSION_ERROR">Z_VERSION_ERROR</a> (-6)
+/* Return codes for the compression/decompression functions. Negative
+ * values are errors, positive values are used for special but normal events.
+ */
+
+#define <a name="Z_NO_COMPRESSION">Z_NO_COMPRESSION</a> 0
+#define <a name="Z_BEST_SPEED">Z_BEST_SPEED</a> 1
+#define <a name="Z_BEST_COMPRESSION">Z_BEST_COMPRESSION</a> 9
+#define <a name="Z_DEFAULT_COMPRESSION">Z_DEFAULT_COMPRESSION</a> (-1)
+/* compression levels */
+
+#define <a name="Z_FILTERED">Z_FILTERED</a> 1
+#define <a name="Z_HUFFMAN_ONLY">Z_HUFFMAN_ONLY</a> 2
+#define <a name="Z_DEFAULT_STRATEGY">Z_DEFAULT_STRATEGY</a> 0
+/* compression strategy ; see <a href="#deflateInit2">deflateInit2</a>() below for details */
+
+#define <a name="Z_BINARY">Z_BINARY</a> 0
+#define <a name="Z_ASCII">Z_ASCII</a> 1
+#define <a name="Z_UNKNOWN">Z_UNKNOWN</a> 2
+/* Possible values of the <a href="#data_type">data_type</a> field */
+
+#define <a name="Z_DEFLATED">Z_DEFLATED</a> 8
+/* The <a href="#deflate">deflate</a> compression method (the only one supported in this version) */
+
+#define <a name="Z_NULL">Z_NULL</a> 0 /* for initializing <a href="#zalloc">zalloc</a>, <a href="#zfree">zfree</a>, <a href="#opaque">opaque</a> */
+
+#define <a name="zlib_version">zlib_version</a> <a href="#zlibVersion">zlibVersion</a>()
+/* for compatibility with versions less than 1.0.2 */
+</pre>
+</font>
+
+<hr>
+<a name="Misc"><h2> Misc </h2>
+ <a href="#deflateInit">deflateInit</a> and <a href="#inflateInit">inflateInit</a> are macros to allow checking the zlib version
+ and the compiler's view of <a href="#z_stream_s">z_stream</a>.
+ <p>
+ Other functions:
+ <dl>
+ <font color="Blue"><dt> const char * <a name="zError">zError</a> (int err);</font>
+ <font color="Blue"><dt> int <a name="inflateSyncPoint">inflateSyncPoint</a> (<a href="#z_streamp">z_streamp</a> z);</font>
+ <font color="Blue"><dt> const uLongf * <a name="get_crc_table">get_crc_table</a> (void);</font>
+ </dl>
+ <hr>
+ <font size="-1">
+ Last update: Wed Oct 13 20:42:34 1999<br>
+ piapi@csie.ntu.edu.tw
+ </font>
+
+</body>
+</html>
diff --git a/compat/zlib/projects/README.projects b/compat/zlib/projects/README.projects
new file mode 100644
index 0000000..1c029e4
--- /dev/null
+++ b/compat/zlib/projects/README.projects
@@ -0,0 +1,41 @@
+This directory contains project files for building zlib under various
+Integrated Development Environments (IDE).
+
+If you wish to submit a new project to this directory, you should comply
+to the following requirements. Otherwise (e.g. if you wish to integrate
+a custom piece of code that changes the zlib interface or its behavior),
+please consider submitting the project to the contrib directory.
+
+
+Requirements
+============
+
+- The project must build zlib using the source files from the official
+ zlib source distribution, exclusively.
+
+- If the project produces redistributable builds (e.g. shared objects
+ or DLL files), these builds must be compatible to those produced by
+ makefiles, if such makefiles exist in the zlib distribution.
+ In particular, if the project produces a DLL build for the Win32
+ platform, this build must comply to the officially-ammended Win32 DLL
+ Application Binary Interface (ABI), described in win32/DLL_FAQ.txt.
+
+- The project may provide additional build targets, which depend on
+ 3rd-party (unofficially-supported) software, present in the contrib
+ directory. For example, it is possible to provide an "ASM build",
+ besides the officially-supported build, and have ASM source files
+ among its dependencies.
+
+- If there are significant differences between the project files created
+ by different versions of an IDE (e.g. Visual C++ 6.0 vs. 7.0), the name
+ of the project directory should contain the version number of the IDE
+ for which the project is intended (e.g. "visualc6" for Visual C++ 6.0,
+ or "visualc7" for Visual C++ 7.0 and 7.1).
+
+
+Current projects
+================
+
+visualc6/ by Simon-Pierre Cadieux <methodex@methodex.ca>
+ and Cosmin Truta <cosmint@cs.ubbcluj.ro>
+ Project for Microsoft Visual C++ 6.0
diff --git a/compat/zlib/projects/visualc6/README.txt b/compat/zlib/projects/visualc6/README.txt
new file mode 100644
index 0000000..3d0aef0
--- /dev/null
+++ b/compat/zlib/projects/visualc6/README.txt
@@ -0,0 +1,73 @@
+Microsoft Developer Studio Project Files, Format Version 6.00 for zlib.
+
+Copyright (C) 2000-2004 Simon-Pierre Cadieux.
+Copyright (C) 2004 Cosmin Truta.
+For conditions of distribution and use, see copyright notice in zlib.h.
+
+
+This project builds the zlib binaries as follows:
+
+* Win32_DLL_Release\zlib1.dll DLL build
+* Win32_DLL_Debug\zlib1d.dll DLL build (debug version)
+* Win32_DLL_ASM_Release\zlib1.dll DLL build using ASM code
+* Win32_DLL_ASM_Debug\zlib1d.dll DLL build using ASM code (debug version)
+* Win32_LIB_Release\zlib.lib static build
+* Win32_LIB_Debug\zlibd.lib static build (debug version)
+* Win32_LIB_ASM_Release\zlib.lib static build using ASM code
+* Win32_LIB_ASM_Debug\zlibd.lib static build using ASM code (debug version)
+
+
+For more information regarding the DLL builds, please see the DLL FAQ
+in ..\..\win32\DLL_FAQ.txt.
+
+
+To build and test:
+
+1) On the main menu, select "File | Open Workspace".
+ Open "zlib.dsw".
+
+2) Select "Build | Set Active Configuration".
+ Choose the configuration you wish to build.
+
+3) Select "Build | Clean".
+
+4) Select "Build | Build ... (F7)". Ignore warning messages about
+ not being able to find certain include files (e.g. alloc.h).
+
+5) If you built one of the sample programs (example or minigzip),
+ select "Build | Execute ... (Ctrl+F5)".
+
+
+To use:
+
+1) Select "Project | Settings (Alt+F7)".
+ Make note of the configuration names used in your project.
+ Usually, these names are "Win32 Release" and "Win32 Debug".
+
+2) In the Workspace window, select the "FileView" tab.
+ Right-click on the root item "Workspace '...'".
+ Select "Insert Project into Workspace".
+ Switch on the checkbox "Dependency of:", and select the name
+ of your project. Open "zlib.dsp".
+
+3) Select "Build | Configurations".
+ For each configuration of your project:
+ 3.1) Choose the zlib configuration you wish to use.
+ 3.2) Click on "Add".
+ 3.3) Set the new zlib configuration name to the name used by
+ the configuration from the current iteration.
+
+4) Select "Build | Set Active Configuration".
+ Choose the configuration you wish to build.
+
+5) Select "Build | Build ... (F7)".
+
+6) If you built an executable program, select
+ "Build | Execute ... (Ctrl+F5)".
+
+
+Note:
+
+To build the ASM-enabled code, you need Microsoft Assembler
+(ML.EXE). You can get it by downloading and installing the
+latest Processor Pack for Visual C++ 6.0.
diff --git a/compat/zlib/projects/visualc6/example.dsp b/compat/zlib/projects/visualc6/example.dsp
new file mode 100644
index 0000000..2599efd
--- /dev/null
+++ b/compat/zlib/projects/visualc6/example.dsp
@@ -0,0 +1,278 @@
+# Microsoft Developer Studio Project File - Name="example" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 6.00
+# ** DO NOT EDIT **
+
+# TARGTYPE "Win32 (x86) Console Application" 0x0103
+
+CFG=example - Win32 LIB Debug
+!MESSAGE This is not a valid makefile. To build this project using NMAKE,
+!MESSAGE use the Export Makefile command and run
+!MESSAGE
+!MESSAGE NMAKE /f "example.mak".
+!MESSAGE
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE
+!MESSAGE NMAKE /f "example.mak" CFG="example - Win32 LIB Debug"
+!MESSAGE
+!MESSAGE Possible choices for configuration are:
+!MESSAGE
+!MESSAGE "example - Win32 DLL ASM Release" (based on "Win32 (x86) Console Application")
+!MESSAGE "example - Win32 DLL ASM Debug" (based on "Win32 (x86) Console Application")
+!MESSAGE "example - Win32 DLL Release" (based on "Win32 (x86) Console Application")
+!MESSAGE "example - Win32 DLL Debug" (based on "Win32 (x86) Console Application")
+!MESSAGE "example - Win32 LIB ASM Release" (based on "Win32 (x86) Console Application")
+!MESSAGE "example - Win32 LIB ASM Debug" (based on "Win32 (x86) Console Application")
+!MESSAGE "example - Win32 LIB Release" (based on "Win32 (x86) Console Application")
+!MESSAGE "example - Win32 LIB Debug" (based on "Win32 (x86) Console Application")
+!MESSAGE
+
+# Begin Project
+# PROP AllowPerConfigDependencies 0
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+CPP=cl.exe
+RSC=rc.exe
+
+!IF "$(CFG)" == "example - Win32 DLL ASM Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "example___Win32_DLL_ASM_Release"
+# PROP BASE Intermediate_Dir "example___Win32_DLL_ASM_Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Win32_DLL_ASM_Release"
+# PROP Intermediate_Dir "Win32_DLL_ASM_Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
+# SUBTRACT BASE CPP /YX
+# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "NDEBUG" /FD /c
+# SUBTRACT CPP /YX
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
+# ADD LINK32 /nologo /subsystem:console /machine:I386
+
+!ELSEIF "$(CFG)" == "example - Win32 DLL ASM Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "example___Win32_DLL_ASM_Debug"
+# PROP BASE Intermediate_Dir "example___Win32_DLL_ASM_Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Win32_DLL_ASM_Debug"
+# PROP Intermediate_Dir "Win32_DLL_ASM_Debug"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
+# SUBTRACT BASE CPP /YX
+# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "_DEBUG" /FR /FD /GZ /c
+# SUBTRACT CPP /YX
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+# ADD LINK32 /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+
+!ELSEIF "$(CFG)" == "example - Win32 DLL Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "example___Win32_DLL_Release"
+# PROP BASE Intermediate_Dir "example___Win32_DLL_Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Win32_DLL_Release"
+# PROP Intermediate_Dir "Win32_DLL_Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
+# SUBTRACT BASE CPP /YX
+# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "NDEBUG" /FD /c
+# SUBTRACT CPP /YX
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
+# ADD LINK32 /nologo /subsystem:console /machine:I386
+
+!ELSEIF "$(CFG)" == "example - Win32 DLL Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "example___Win32_DLL_Debug"
+# PROP BASE Intermediate_Dir "example___Win32_DLL_Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Win32_DLL_Debug"
+# PROP Intermediate_Dir "Win32_DLL_Debug"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
+# SUBTRACT BASE CPP /YX
+# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "_DEBUG" /FR /FD /GZ /c
+# SUBTRACT CPP /YX
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+# ADD LINK32 /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+
+!ELSEIF "$(CFG)" == "example - Win32 LIB ASM Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "example___Win32_LIB_ASM_Release"
+# PROP BASE Intermediate_Dir "example___Win32_LIB_ASM_Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Win32_LIB_ASM_Release"
+# PROP Intermediate_Dir "Win32_LIB_ASM_Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
+# SUBTRACT BASE CPP /YX
+# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "NDEBUG" /FD /c
+# SUBTRACT CPP /YX
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
+# ADD LINK32 /nologo /subsystem:console /machine:I386
+
+!ELSEIF "$(CFG)" == "example - Win32 LIB ASM Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "example___Win32_LIB_ASM_Debug"
+# PROP BASE Intermediate_Dir "example___Win32_LIB_ASM_Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Win32_LIB_ASM_Debug"
+# PROP Intermediate_Dir "Win32_LIB_ASM_Debug"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
+# SUBTRACT BASE CPP /YX
+# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "_DEBUG" /FR /FD /GZ /c
+# SUBTRACT CPP /YX
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+# ADD LINK32 /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+
+!ELSEIF "$(CFG)" == "example - Win32 LIB Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "example___Win32_LIB_Release"
+# PROP BASE Intermediate_Dir "example___Win32_LIB_Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Win32_LIB_Release"
+# PROP Intermediate_Dir "Win32_LIB_Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
+# SUBTRACT BASE CPP /YX
+# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "NDEBUG" /FD /c
+# SUBTRACT CPP /YX
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
+# ADD LINK32 /nologo /subsystem:console /machine:I386
+
+!ELSEIF "$(CFG)" == "example - Win32 LIB Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "example___Win32_LIB_Debug"
+# PROP BASE Intermediate_Dir "example___Win32_LIB_Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Win32_LIB_Debug"
+# PROP Intermediate_Dir "Win32_LIB_Debug"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
+# SUBTRACT BASE CPP /YX
+# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "_DEBUG" /FR /FD /GZ /c
+# SUBTRACT CPP /YX
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+# ADD LINK32 /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+
+!ENDIF
+
+# Begin Target
+
+# Name "example - Win32 DLL ASM Release"
+# Name "example - Win32 DLL ASM Debug"
+# Name "example - Win32 DLL Release"
+# Name "example - Win32 DLL Debug"
+# Name "example - Win32 LIB ASM Release"
+# Name "example - Win32 LIB ASM Debug"
+# Name "example - Win32 LIB Release"
+# Name "example - Win32 LIB Debug"
+# Begin Group "Source Files"
+
+# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
+# Begin Source File
+
+SOURCE=..\..\example.c
+# End Source File
+# End Group
+# Begin Group "Header Files"
+
+# PROP Default_Filter "h;hpp;hxx;hm;inl"
+# Begin Source File
+
+SOURCE=..\..\zconf.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\zlib.h
+# End Source File
+# End Group
+# End Target
+# End Project
diff --git a/compat/zlib/projects/visualc6/minigzip.dsp b/compat/zlib/projects/visualc6/minigzip.dsp
new file mode 100644
index 0000000..941582b
--- /dev/null
+++ b/compat/zlib/projects/visualc6/minigzip.dsp
@@ -0,0 +1,278 @@
+# Microsoft Developer Studio Project File - Name="minigzip" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 6.00
+# ** DO NOT EDIT **
+
+# TARGTYPE "Win32 (x86) Console Application" 0x0103
+
+CFG=minigzip - Win32 LIB Debug
+!MESSAGE This is not a valid makefile. To build this project using NMAKE,
+!MESSAGE use the Export Makefile command and run
+!MESSAGE
+!MESSAGE NMAKE /f "minigzip.mak".
+!MESSAGE
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE
+!MESSAGE NMAKE /f "minigzip.mak" CFG="minigzip - Win32 LIB Debug"
+!MESSAGE
+!MESSAGE Possible choices for configuration are:
+!MESSAGE
+!MESSAGE "minigzip - Win32 DLL ASM Release" (based on "Win32 (x86) Console Application")
+!MESSAGE "minigzip - Win32 DLL ASM Debug" (based on "Win32 (x86) Console Application")
+!MESSAGE "minigzip - Win32 DLL Release" (based on "Win32 (x86) Console Application")
+!MESSAGE "minigzip - Win32 DLL Debug" (based on "Win32 (x86) Console Application")
+!MESSAGE "minigzip - Win32 LIB ASM Release" (based on "Win32 (x86) Console Application")
+!MESSAGE "minigzip - Win32 LIB ASM Debug" (based on "Win32 (x86) Console Application")
+!MESSAGE "minigzip - Win32 LIB Release" (based on "Win32 (x86) Console Application")
+!MESSAGE "minigzip - Win32 LIB Debug" (based on "Win32 (x86) Console Application")
+!MESSAGE
+
+# Begin Project
+# PROP AllowPerConfigDependencies 0
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+CPP=cl.exe
+RSC=rc.exe
+
+!IF "$(CFG)" == "minigzip - Win32 DLL ASM Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "minigzip___Win32_DLL_ASM_Release"
+# PROP BASE Intermediate_Dir "minigzip___Win32_DLL_ASM_Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Win32_DLL_ASM_Release"
+# PROP Intermediate_Dir "Win32_DLL_ASM_Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
+# SUBTRACT BASE CPP /YX
+# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "NDEBUG" /FD /c
+# SUBTRACT CPP /YX
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
+# ADD LINK32 /nologo /subsystem:console /machine:I386
+
+!ELSEIF "$(CFG)" == "minigzip - Win32 DLL ASM Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "minigzip___Win32_DLL_ASM_Debug"
+# PROP BASE Intermediate_Dir "minigzip___Win32_DLL_ASM_Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Win32_DLL_ASM_Debug"
+# PROP Intermediate_Dir "Win32_DLL_ASM_Debug"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
+# SUBTRACT BASE CPP /YX
+# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "_DEBUG" /FR /FD /GZ /c
+# SUBTRACT CPP /YX
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+# ADD LINK32 /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+
+!ELSEIF "$(CFG)" == "minigzip - Win32 DLL Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "minigzip___Win32_DLL_Release"
+# PROP BASE Intermediate_Dir "minigzip___Win32_DLL_Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Win32_DLL_Release"
+# PROP Intermediate_Dir "Win32_DLL_Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
+# SUBTRACT BASE CPP /YX
+# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "NDEBUG" /FD /c
+# SUBTRACT CPP /YX
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
+# ADD LINK32 /nologo /subsystem:console /machine:I386
+
+!ELSEIF "$(CFG)" == "minigzip - Win32 DLL Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "minigzip___Win32_DLL_Debug"
+# PROP BASE Intermediate_Dir "minigzip___Win32_DLL_Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Win32_DLL_Debug"
+# PROP Intermediate_Dir "Win32_DLL_Debug"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
+# SUBTRACT BASE CPP /YX
+# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "_DEBUG" /FR /FD /GZ /c
+# SUBTRACT CPP /YX
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+# ADD LINK32 /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+
+!ELSEIF "$(CFG)" == "minigzip - Win32 LIB ASM Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "minigzip___Win32_LIB_ASM_Release"
+# PROP BASE Intermediate_Dir "minigzip___Win32_LIB_ASM_Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Win32_LIB_ASM_Release"
+# PROP Intermediate_Dir "Win32_LIB_ASM_Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
+# SUBTRACT BASE CPP /YX
+# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "NDEBUG" /FD /c
+# SUBTRACT CPP /YX
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
+# ADD LINK32 /nologo /subsystem:console /machine:I386
+
+!ELSEIF "$(CFG)" == "minigzip - Win32 LIB ASM Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "minigzip___Win32_LIB_ASM_Debug"
+# PROP BASE Intermediate_Dir "minigzip___Win32_LIB_ASM_Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Win32_LIB_ASM_Debug"
+# PROP Intermediate_Dir "Win32_LIB_ASM_Debug"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
+# SUBTRACT BASE CPP /YX
+# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "_DEBUG" /FR /FD /GZ /c
+# SUBTRACT CPP /YX
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+# ADD LINK32 /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+
+!ELSEIF "$(CFG)" == "minigzip - Win32 LIB Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "minigzip___Win32_LIB_Release"
+# PROP BASE Intermediate_Dir "minigzip___Win32_LIB_Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Win32_LIB_Release"
+# PROP Intermediate_Dir "Win32_LIB_Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
+# SUBTRACT BASE CPP /YX
+# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "NDEBUG" /FD /c
+# SUBTRACT CPP /YX
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
+# ADD LINK32 /nologo /subsystem:console /machine:I386
+
+!ELSEIF "$(CFG)" == "minigzip - Win32 LIB Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "minigzip___Win32_LIB_Debug"
+# PROP BASE Intermediate_Dir "minigzip___Win32_LIB_Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Win32_LIB_Debug"
+# PROP Intermediate_Dir "Win32_LIB_Debug"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
+# SUBTRACT BASE CPP /YX
+# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "_DEBUG" /FR /FD /GZ /c
+# SUBTRACT CPP /YX
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+# ADD LINK32 /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+
+!ENDIF
+
+# Begin Target
+
+# Name "minigzip - Win32 DLL ASM Release"
+# Name "minigzip - Win32 DLL ASM Debug"
+# Name "minigzip - Win32 DLL Release"
+# Name "minigzip - Win32 DLL Debug"
+# Name "minigzip - Win32 LIB ASM Release"
+# Name "minigzip - Win32 LIB ASM Debug"
+# Name "minigzip - Win32 LIB Release"
+# Name "minigzip - Win32 LIB Debug"
+# Begin Group "Source Files"
+
+# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
+# Begin Source File
+
+SOURCE=..\..\minigzip.c
+# End Source File
+# End Group
+# Begin Group "Header Files"
+
+# PROP Default_Filter "h;hpp;hxx;hm;inl"
+# Begin Source File
+
+SOURCE=..\..\zconf.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\zlib.h
+# End Source File
+# End Group
+# End Target
+# End Project
diff --git a/compat/zlib/projects/visualc6/zlib.dsp b/compat/zlib/projects/visualc6/zlib.dsp
new file mode 100644
index 0000000..34f1f30
--- /dev/null
+++ b/compat/zlib/projects/visualc6/zlib.dsp
@@ -0,0 +1,621 @@
+# Microsoft Developer Studio Project File - Name="zlib" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 6.00
+# ** DO NOT EDIT **
+
+# TARGTYPE "Win32 (x86) Dynamic-Link Library" 0x0102
+# TARGTYPE "Win32 (x86) Static Library" 0x0104
+
+CFG=zlib - Win32 LIB Debug
+!MESSAGE This is not a valid makefile. To build this project using NMAKE,
+!MESSAGE use the Export Makefile command and run
+!MESSAGE
+!MESSAGE NMAKE /f "zlib.mak".
+!MESSAGE
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE
+!MESSAGE NMAKE /f "zlib.mak" CFG="zlib - Win32 LIB Debug"
+!MESSAGE
+!MESSAGE Possible choices for configuration are:
+!MESSAGE
+!MESSAGE "zlib - Win32 DLL ASM Release" (based on "Win32 (x86) Dynamic-Link Library")
+!MESSAGE "zlib - Win32 DLL ASM Debug" (based on "Win32 (x86) Dynamic-Link Library")
+!MESSAGE "zlib - Win32 DLL Release" (based on "Win32 (x86) Dynamic-Link Library")
+!MESSAGE "zlib - Win32 DLL Debug" (based on "Win32 (x86) Dynamic-Link Library")
+!MESSAGE "zlib - Win32 LIB ASM Release" (based on "Win32 (x86) Static Library")
+!MESSAGE "zlib - Win32 LIB ASM Debug" (based on "Win32 (x86) Static Library")
+!MESSAGE "zlib - Win32 LIB Release" (based on "Win32 (x86) Static Library")
+!MESSAGE "zlib - Win32 LIB Debug" (based on "Win32 (x86) Static Library")
+!MESSAGE
+
+# Begin Project
+# PROP AllowPerConfigDependencies 0
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+
+!IF "$(CFG)" == "zlib - Win32 DLL ASM Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "zlib___Win32_DLL_ASM_Release"
+# PROP BASE Intermediate_Dir "zlib___Win32_DLL_ASM_Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Win32_DLL_ASM_Release"
+# PROP Intermediate_Dir "Win32_DLL_ASM_Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+CPP=cl.exe
+# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
+# SUBTRACT BASE CPP /YX /Yc /Yu
+# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "NDEBUG" /D "ASMV" /D "ASMINF" /FD /c
+# SUBTRACT CPP /YX /Yc /Yu
+MTL=midl.exe
+# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+RSC=rc.exe
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /dll /machine:I386
+# ADD LINK32 /nologo /dll /machine:I386 /out:"Win32_DLL_ASM_Release\zlib1.dll"
+
+!ELSEIF "$(CFG)" == "zlib - Win32 DLL ASM Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "zlib___Win32_DLL_ASM_Debug"
+# PROP BASE Intermediate_Dir "zlib___Win32_DLL_ASM_Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Win32_DLL_ASM_Debug"
+# PROP Intermediate_Dir "Win32_DLL_ASM_Debug"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+CPP=cl.exe
+# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
+# SUBTRACT BASE CPP /YX /Yc /Yu
+# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "_DEBUG" /D "ASMV" /D "ASMINF" /FR /FD /GZ /c
+# SUBTRACT CPP /YX /Yc /Yu
+MTL=midl.exe
+# ADD BASE MTL /nologo /D "_DEBUG" /mktyplib203 /win32
+# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /win32
+RSC=rc.exe
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /dll /debug /machine:I386 /pdbtype:sept
+# ADD LINK32 /nologo /dll /debug /machine:I386 /out:"Win32_DLL_ASM_Debug\zlib1d.dll" /pdbtype:sept
+
+!ELSEIF "$(CFG)" == "zlib - Win32 DLL Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "zlib___Win32_DLL_Release"
+# PROP BASE Intermediate_Dir "zlib___Win32_DLL_Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Win32_DLL_Release"
+# PROP Intermediate_Dir "Win32_DLL_Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+CPP=cl.exe
+# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
+# SUBTRACT BASE CPP /YX /Yc /Yu
+# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "NDEBUG" /FD /c
+# SUBTRACT CPP /YX /Yc /Yu
+MTL=midl.exe
+# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+RSC=rc.exe
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /dll /machine:I386
+# ADD LINK32 /nologo /dll /machine:I386 /out:"Win32_DLL_Release\zlib1.dll"
+
+!ELSEIF "$(CFG)" == "zlib - Win32 DLL Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "zlib___Win32_DLL_Debug"
+# PROP BASE Intermediate_Dir "zlib___Win32_DLL_Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Win32_DLL_Debug"
+# PROP Intermediate_Dir "Win32_DLL_Debug"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+CPP=cl.exe
+# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
+# SUBTRACT BASE CPP /YX /Yc /Yu
+# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "_DEBUG" /FR /FD /GZ /c
+# SUBTRACT CPP /YX /Yc /Yu
+MTL=midl.exe
+# ADD BASE MTL /nologo /D "_DEBUG" /mktyplib203 /win32
+# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /win32
+RSC=rc.exe
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /dll /debug /machine:I386 /pdbtype:sept
+# ADD LINK32 /nologo /dll /debug /machine:I386 /out:"Win32_DLL_Debug\zlib1d.dll" /pdbtype:sept
+
+!ELSEIF "$(CFG)" == "zlib - Win32 LIB ASM Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "zlib___Win32_LIB_ASM_Release"
+# PROP BASE Intermediate_Dir "zlib___Win32_LIB_ASM_Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Win32_LIB_ASM_Release"
+# PROP Intermediate_Dir "Win32_LIB_ASM_Release"
+# PROP Target_Dir ""
+CPP=cl.exe
+# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
+# SUBTRACT BASE CPP /YX /Yc /Yu
+# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "NDEBUG" /D "ASMV" /D "ASMINF" /FD /c
+# SUBTRACT CPP /YX /Yc /Yu
+RSC=rc.exe
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LIB32=link.exe -lib
+# ADD BASE LIB32 /nologo
+# ADD LIB32 /nologo
+
+!ELSEIF "$(CFG)" == "zlib - Win32 LIB ASM Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "zlib___Win32_LIB_ASM_Debug"
+# PROP BASE Intermediate_Dir "zlib___Win32_LIB_ASM_Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Win32_LIB_ASM_Debug"
+# PROP Intermediate_Dir "Win32_LIB_ASM_Debug"
+# PROP Target_Dir ""
+CPP=cl.exe
+# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
+# SUBTRACT BASE CPP /YX /Yc /Yu
+# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "_DEBUG" /D "ASMV" /D "ASMINF" /FR /FD /GZ /c
+# SUBTRACT CPP /YX /Yc /Yu
+RSC=rc.exe
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LIB32=link.exe -lib
+# ADD BASE LIB32 /nologo
+# ADD LIB32 /nologo /out:"Win32_LIB_ASM_Debug\zlibd.lib"
+
+!ELSEIF "$(CFG)" == "zlib - Win32 LIB Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "zlib___Win32_LIB_Release"
+# PROP BASE Intermediate_Dir "zlib___Win32_LIB_Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Win32_LIB_Release"
+# PROP Intermediate_Dir "Win32_LIB_Release"
+# PROP Target_Dir ""
+CPP=cl.exe
+# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
+# SUBTRACT BASE CPP /YX /Yc /Yu
+# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "NDEBUG" /FD /c
+# SUBTRACT CPP /YX /Yc /Yu
+RSC=rc.exe
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LIB32=link.exe -lib
+# ADD BASE LIB32 /nologo
+# ADD LIB32 /nologo
+
+!ELSEIF "$(CFG)" == "zlib - Win32 LIB Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "zlib___Win32_LIB_Debug"
+# PROP BASE Intermediate_Dir "zlib___Win32_LIB_Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Win32_LIB_Debug"
+# PROP Intermediate_Dir "Win32_LIB_Debug"
+# PROP Target_Dir ""
+CPP=cl.exe
+# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
+# SUBTRACT BASE CPP /YX /Yc /Yu
+# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "_DEBUG" /FR /FD /GZ /c
+# SUBTRACT CPP /YX /Yc /Yu
+RSC=rc.exe
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LIB32=link.exe -lib
+# ADD BASE LIB32 /nologo
+# ADD LIB32 /nologo /out:"Win32_LIB_Debug\zlibd.lib"
+
+!ENDIF
+
+# Begin Target
+
+# Name "zlib - Win32 DLL ASM Release"
+# Name "zlib - Win32 DLL ASM Debug"
+# Name "zlib - Win32 DLL Release"
+# Name "zlib - Win32 DLL Debug"
+# Name "zlib - Win32 LIB ASM Release"
+# Name "zlib - Win32 LIB ASM Debug"
+# Name "zlib - Win32 LIB Release"
+# Name "zlib - Win32 LIB Debug"
+# Begin Group "Source Files"
+
+# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
+# Begin Source File
+
+SOURCE=..\..\adler32.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\compress.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\crc32.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\deflate.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\gzclose.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\gzlib.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\gzread.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\gzwrite.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\infback.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\inffast.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\inflate.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\inftrees.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\trees.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\uncompr.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\win32\zlib.def
+
+!IF "$(CFG)" == "zlib - Win32 DLL ASM Release"
+
+!ELSEIF "$(CFG)" == "zlib - Win32 DLL ASM Debug"
+
+!ELSEIF "$(CFG)" == "zlib - Win32 DLL Release"
+
+!ELSEIF "$(CFG)" == "zlib - Win32 DLL Debug"
+
+!ELSEIF "$(CFG)" == "zlib - Win32 LIB ASM Release"
+
+# PROP Exclude_From_Build 1
+
+!ELSEIF "$(CFG)" == "zlib - Win32 LIB ASM Debug"
+
+# PROP Exclude_From_Build 1
+
+!ELSEIF "$(CFG)" == "zlib - Win32 LIB Release"
+
+# PROP Exclude_From_Build 1
+
+!ELSEIF "$(CFG)" == "zlib - Win32 LIB Debug"
+
+# PROP Exclude_From_Build 1
+
+!ENDIF
+
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\zutil.c
+# End Source File
+# End Group
+# Begin Group "Header Files"
+
+# PROP Default_Filter "h;hpp;hxx;hm;inl"
+# Begin Source File
+
+SOURCE=..\..\crc32.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\deflate.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\inffast.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\inffixed.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\inflate.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\inftrees.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\trees.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\zconf.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\zlib.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\zutil.h
+# End Source File
+# End Group
+# Begin Group "Resource Files"
+
+# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
+# Begin Source File
+
+SOURCE=..\..\win32\zlib1.rc
+# End Source File
+# End Group
+# Begin Group "Assembler Files (Unsupported)"
+
+# PROP Default_Filter "asm;obj;c;cpp;cxx;h;hpp;hxx"
+# Begin Source File
+
+SOURCE=..\..\contrib\masmx86\gvmat32.asm
+
+!IF "$(CFG)" == "zlib - Win32 DLL ASM Release"
+
+# Begin Custom Build - Assembling...
+IntDir=.\Win32_DLL_ASM_Release
+InputPath=..\..\contrib\masmx86\gvmat32.asm
+InputName=gvmat32
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+ ml.exe /nologo /c /coff /Cx /Fo"$(IntDir)\$(InputName).obj" "$(InputPath)"
+
+# End Custom Build
+
+!ELSEIF "$(CFG)" == "zlib - Win32 DLL ASM Debug"
+
+# Begin Custom Build - Assembling...
+IntDir=.\Win32_DLL_ASM_Debug
+InputPath=..\..\contrib\masmx86\gvmat32.asm
+InputName=gvmat32
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+ ml.exe /nologo /c /coff /Cx /Zi /Fo"$(IntDir)\$(InputName).obj" "$(InputPath)"
+
+# End Custom Build
+
+!ELSEIF "$(CFG)" == "zlib - Win32 DLL Release"
+
+# PROP Exclude_From_Build 1
+
+!ELSEIF "$(CFG)" == "zlib - Win32 DLL Debug"
+
+# PROP Exclude_From_Build 1
+
+!ELSEIF "$(CFG)" == "zlib - Win32 LIB ASM Release"
+
+# Begin Custom Build - Assembling...
+IntDir=.\Win32_LIB_ASM_Release
+InputPath=..\..\contrib\masmx86\gvmat32.asm
+InputName=gvmat32
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+ ml.exe /nologo /c /coff /Cx /Fo"$(IntDir)\$(InputName).obj" "$(InputPath)"
+
+# End Custom Build
+
+!ELSEIF "$(CFG)" == "zlib - Win32 LIB ASM Debug"
+
+# Begin Custom Build - Assembling...
+IntDir=.\Win32_LIB_ASM_Debug
+InputPath=..\..\contrib\masmx86\gvmat32.asm
+InputName=gvmat32
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+ ml.exe /nologo /c /coff /Cx /Zi /Fo"$(IntDir)\$(InputName).obj" "$(InputPath)"
+
+# End Custom Build
+
+!ELSEIF "$(CFG)" == "zlib - Win32 LIB Release"
+
+# PROP Exclude_From_Build 1
+
+!ELSEIF "$(CFG)" == "zlib - Win32 LIB Debug"
+
+# PROP Exclude_From_Build 1
+
+!ENDIF
+
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\contrib\masmx86\gvmat32c.c
+
+!IF "$(CFG)" == "zlib - Win32 DLL ASM Release"
+
+# ADD CPP /I "..\.."
+
+!ELSEIF "$(CFG)" == "zlib - Win32 DLL ASM Debug"
+
+# ADD CPP /I "..\.."
+
+!ELSEIF "$(CFG)" == "zlib - Win32 DLL Release"
+
+# PROP Exclude_From_Build 1
+# ADD CPP /I "..\.."
+
+!ELSEIF "$(CFG)" == "zlib - Win32 DLL Debug"
+
+# PROP Exclude_From_Build 1
+# ADD CPP /I "..\.."
+
+!ELSEIF "$(CFG)" == "zlib - Win32 LIB ASM Release"
+
+# ADD CPP /I "..\.."
+
+!ELSEIF "$(CFG)" == "zlib - Win32 LIB ASM Debug"
+
+# ADD CPP /I "..\.."
+
+!ELSEIF "$(CFG)" == "zlib - Win32 LIB Release"
+
+# PROP Exclude_From_Build 1
+# ADD CPP /I "..\.."
+
+!ELSEIF "$(CFG)" == "zlib - Win32 LIB Debug"
+
+# PROP Exclude_From_Build 1
+# ADD CPP /I "..\.."
+
+!ENDIF
+
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\contrib\masmx86\inffas32.asm
+
+!IF "$(CFG)" == "zlib - Win32 DLL ASM Release"
+
+# Begin Custom Build - Assembling...
+IntDir=.\Win32_DLL_ASM_Release
+InputPath=..\..\contrib\masmx86\inffas32.asm
+InputName=inffas32
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+ ml.exe /nologo /c /coff /Cx /Fo"$(IntDir)\$(InputName).obj" "$(InputPath)"
+
+# End Custom Build
+
+!ELSEIF "$(CFG)" == "zlib - Win32 DLL ASM Debug"
+
+# Begin Custom Build - Assembling...
+IntDir=.\Win32_DLL_ASM_Debug
+InputPath=..\..\contrib\masmx86\inffas32.asm
+InputName=inffas32
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+ ml.exe /nologo /c /coff /Cx /Zi /Fo"$(IntDir)\$(InputName).obj" "$(InputPath)"
+
+# End Custom Build
+
+!ELSEIF "$(CFG)" == "zlib - Win32 DLL Release"
+
+# PROP Exclude_From_Build 1
+
+!ELSEIF "$(CFG)" == "zlib - Win32 DLL Debug"
+
+# PROP Exclude_From_Build 1
+
+!ELSEIF "$(CFG)" == "zlib - Win32 LIB ASM Release"
+
+# Begin Custom Build - Assembling...
+IntDir=.\Win32_LIB_ASM_Release
+InputPath=..\..\contrib\masmx86\inffas32.asm
+InputName=inffas32
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+ ml.exe /nologo /c /coff /Cx /Fo"$(IntDir)\$(InputName).obj" "$(InputPath)"
+
+# End Custom Build
+
+!ELSEIF "$(CFG)" == "zlib - Win32 LIB ASM Debug"
+
+# Begin Custom Build - Assembling...
+IntDir=.\Win32_LIB_ASM_Debug
+InputPath=..\..\contrib\masmx86\inffas32.asm
+InputName=inffas32
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+ ml.exe /nologo /c /coff /Cx /Zi /Fo"$(IntDir)\$(InputName).obj" "$(InputPath)"
+
+# End Custom Build
+
+!ELSEIF "$(CFG)" == "zlib - Win32 LIB Release"
+
+# PROP Exclude_From_Build 1
+
+!ELSEIF "$(CFG)" == "zlib - Win32 LIB Debug"
+
+# PROP Exclude_From_Build 1
+
+!ENDIF
+
+# End Source File
+# End Group
+# Begin Source File
+
+SOURCE=.\README.txt
+# End Source File
+# End Target
+# End Project
diff --git a/compat/zlib/projects/visualc6/zlib.dsw b/compat/zlib/projects/visualc6/zlib.dsw
new file mode 100644
index 0000000..2644856
--- /dev/null
+++ b/compat/zlib/projects/visualc6/zlib.dsw
@@ -0,0 +1,59 @@
+Microsoft Developer Studio Workspace File, Format Version 6.00
+# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
+
+###############################################################################
+
+Project: "example"=.\example.dsp - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+ Begin Project Dependency
+ Project_Dep_Name zlib
+ End Project Dependency
+}}}
+
+###############################################################################
+
+Project: "minigzip"=.\minigzip.dsp - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+ Begin Project Dependency
+ Project_Dep_Name zlib
+ End Project Dependency
+}}}
+
+###############################################################################
+
+Project: "zlib"=.\zlib.dsp - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Global:
+
+Package=<5>
+{{{
+}}}
+
+Package=<3>
+{{{
+}}}
+
+###############################################################################
+
diff --git a/compat/zlib/zconf.in.h b/compat/zlib/zconf.in.h
new file mode 100644
index 0000000..49595cc
--- /dev/null
+++ b/compat/zlib/zconf.in.h
@@ -0,0 +1,332 @@
+/* zconf.h -- configuration of the zlib compression library
+ * Copyright (C) 1995-2005 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id: zconf.in.h,v 1.1 2008/12/18 14:14:59 dkf Exp $ */
+
+#ifndef ZCONF_H
+#define ZCONF_H
+
+/*
+ * If you *really* need a unique prefix for all types and library functions,
+ * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it.
+ */
+#ifdef Z_PREFIX
+# define deflateInit_ z_deflateInit_
+# define deflate z_deflate
+# define deflateEnd z_deflateEnd
+# define inflateInit_ z_inflateInit_
+# define inflate z_inflate
+# define inflateEnd z_inflateEnd
+# define deflateInit2_ z_deflateInit2_
+# define deflateSetDictionary z_deflateSetDictionary
+# define deflateCopy z_deflateCopy
+# define deflateReset z_deflateReset
+# define deflateParams z_deflateParams
+# define deflateBound z_deflateBound
+# define deflatePrime z_deflatePrime
+# define inflateInit2_ z_inflateInit2_
+# define inflateSetDictionary z_inflateSetDictionary
+# define inflateSync z_inflateSync
+# define inflateSyncPoint z_inflateSyncPoint
+# define inflateCopy z_inflateCopy
+# define inflateReset z_inflateReset
+# define inflateBack z_inflateBack
+# define inflateBackEnd z_inflateBackEnd
+# define compress z_compress
+# define compress2 z_compress2
+# define compressBound z_compressBound
+# define uncompress z_uncompress
+# define adler32 z_adler32
+# define crc32 z_crc32
+# define get_crc_table z_get_crc_table
+# define zError z_zError
+
+# define alloc_func z_alloc_func
+# define free_func z_free_func
+# define in_func z_in_func
+# define out_func z_out_func
+# define Byte z_Byte
+# define uInt z_uInt
+# define uLong z_uLong
+# define Bytef z_Bytef
+# define charf z_charf
+# define intf z_intf
+# define uIntf z_uIntf
+# define uLongf z_uLongf
+# define voidpf z_voidpf
+# define voidp z_voidp
+#endif
+
+#if defined(__MSDOS__) && !defined(MSDOS)
+# define MSDOS
+#endif
+#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2)
+# define OS2
+#endif
+#if defined(_WINDOWS) && !defined(WINDOWS)
+# define WINDOWS
+#endif
+#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__)
+# ifndef WIN32
+# define WIN32
+# endif
+#endif
+#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32)
+# if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__)
+# ifndef SYS16BIT
+# define SYS16BIT
+# endif
+# endif
+#endif
+
+/*
+ * Compile with -DMAXSEG_64K if the alloc function cannot allocate more
+ * than 64k bytes at a time (needed on systems with 16-bit int).
+ */
+#ifdef SYS16BIT
+# define MAXSEG_64K
+#endif
+#ifdef MSDOS
+# define UNALIGNED_OK
+#endif
+
+#ifdef __STDC_VERSION__
+# ifndef STDC
+# define STDC
+# endif
+# if __STDC_VERSION__ >= 199901L
+# ifndef STDC99
+# define STDC99
+# endif
+# endif
+#endif
+#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus))
+# define STDC
+#endif
+#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__))
+# define STDC
+#endif
+#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32))
+# define STDC
+#endif
+#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__))
+# define STDC
+#endif
+
+#if defined(__OS400__) && !defined(STDC) /* iSeries (formerly AS/400). */
+# define STDC
+#endif
+
+#ifndef STDC
+# ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */
+# define const /* note: need a more gentle solution here */
+# endif
+#endif
+
+/* Some Mac compilers merge all .h files incorrectly: */
+#if defined(__MWERKS__)||defined(applec)||defined(THINK_C)||defined(__SC__)
+# define NO_DUMMY_DECL
+#endif
+
+/* Maximum value for memLevel in deflateInit2 */
+#ifndef MAX_MEM_LEVEL
+# ifdef MAXSEG_64K
+# define MAX_MEM_LEVEL 8
+# else
+# define MAX_MEM_LEVEL 9
+# endif
+#endif
+
+/* Maximum value for windowBits in deflateInit2 and inflateInit2.
+ * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files
+ * created by gzip. (Files created by minigzip can still be extracted by
+ * gzip.)
+ */
+#ifndef MAX_WBITS
+# define MAX_WBITS 15 /* 32K LZ77 window */
+#endif
+
+/* The memory requirements for deflate are (in bytes):
+ (1 << (windowBits+2)) + (1 << (memLevel+9))
+ that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values)
+ plus a few kilobytes for small objects. For example, if you want to reduce
+ the default memory requirements from 256K to 128K, compile with
+ make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
+ Of course this will generally degrade compression (there's no free lunch).
+
+ The memory requirements for inflate are (in bytes) 1 << windowBits
+ that is, 32K for windowBits=15 (default value) plus a few kilobytes
+ for small objects.
+*/
+
+ /* Type declarations */
+
+#ifndef OF /* function prototypes */
+# ifdef STDC
+# define OF(args) args
+# else
+# define OF(args) ()
+# endif
+#endif
+
+/* The following definitions for FAR are needed only for MSDOS mixed
+ * model programming (small or medium model with some far allocations).
+ * This was tested only with MSC; for other MSDOS compilers you may have
+ * to define NO_MEMCPY in zutil.h. If you don't need the mixed model,
+ * just define FAR to be empty.
+ */
+#ifdef SYS16BIT
+# if defined(M_I86SM) || defined(M_I86MM)
+ /* MSC small or medium model */
+# define SMALL_MEDIUM
+# ifdef _MSC_VER
+# define FAR _far
+# else
+# define FAR far
+# endif
+# endif
+# if (defined(__SMALL__) || defined(__MEDIUM__))
+ /* Turbo C small or medium model */
+# define SMALL_MEDIUM
+# ifdef __BORLANDC__
+# define FAR _far
+# else
+# define FAR far
+# endif
+# endif
+#endif
+
+#if defined(WINDOWS) || defined(WIN32)
+ /* If building or using zlib as a DLL, define ZLIB_DLL.
+ * This is not mandatory, but it offers a little performance increase.
+ */
+# ifdef ZLIB_DLL
+# if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500))
+# ifdef ZLIB_INTERNAL
+# define ZEXTERN extern __declspec(dllexport)
+# else
+# define ZEXTERN extern __declspec(dllimport)
+# endif
+# endif
+# endif /* ZLIB_DLL */
+ /* If building or using zlib with the WINAPI/WINAPIV calling convention,
+ * define ZLIB_WINAPI.
+ * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI.
+ */
+# ifdef ZLIB_WINAPI
+# ifdef FAR
+# undef FAR
+# endif
+# include <windows.h>
+ /* No need for _export, use ZLIB.DEF instead. */
+ /* For complete Windows compatibility, use WINAPI, not __stdcall. */
+# define ZEXPORT WINAPI
+# ifdef WIN32
+# define ZEXPORTVA WINAPIV
+# else
+# define ZEXPORTVA FAR CDECL
+# endif
+# endif
+#endif
+
+#if defined (__BEOS__)
+# ifdef ZLIB_DLL
+# ifdef ZLIB_INTERNAL
+# define ZEXPORT __declspec(dllexport)
+# define ZEXPORTVA __declspec(dllexport)
+# else
+# define ZEXPORT __declspec(dllimport)
+# define ZEXPORTVA __declspec(dllimport)
+# endif
+# endif
+#endif
+
+#ifndef ZEXTERN
+# define ZEXTERN extern
+#endif
+#ifndef ZEXPORT
+# define ZEXPORT
+#endif
+#ifndef ZEXPORTVA
+# define ZEXPORTVA
+#endif
+
+#ifndef FAR
+# define FAR
+#endif
+
+#if !defined(__MACTYPES__)
+typedef unsigned char Byte; /* 8 bits */
+#endif
+typedef unsigned int uInt; /* 16 bits or more */
+typedef unsigned long uLong; /* 32 bits or more */
+
+#ifdef SMALL_MEDIUM
+ /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */
+# define Bytef Byte FAR
+#else
+ typedef Byte FAR Bytef;
+#endif
+typedef char FAR charf;
+typedef int FAR intf;
+typedef uInt FAR uIntf;
+typedef uLong FAR uLongf;
+
+#ifdef STDC
+ typedef void const *voidpc;
+ typedef void FAR *voidpf;
+ typedef void *voidp;
+#else
+ typedef Byte const *voidpc;
+ typedef Byte FAR *voidpf;
+ typedef Byte *voidp;
+#endif
+
+#if 0 /* HAVE_UNISTD_H -- this line is updated by ./configure */
+# include <sys/types.h> /* for off_t */
+# include <unistd.h> /* for SEEK_* and off_t */
+# ifdef VMS
+# include <unixio.h> /* for off_t */
+# endif
+# define z_off_t off_t
+#endif
+#ifndef SEEK_SET
+# define SEEK_SET 0 /* Seek from beginning of file. */
+# define SEEK_CUR 1 /* Seek from current position. */
+# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */
+#endif
+#ifndef z_off_t
+# define z_off_t long
+#endif
+
+#if defined(__OS400__)
+# define NO_vsnprintf
+#endif
+
+#if defined(__MVS__)
+# define NO_vsnprintf
+# ifdef FAR
+# undef FAR
+# endif
+#endif
+
+/* MVS linker does not support external names larger than 8 bytes */
+#if defined(__MVS__)
+# pragma map(deflateInit_,"DEIN")
+# pragma map(deflateInit2_,"DEIN2")
+# pragma map(deflateEnd,"DEEND")
+# pragma map(deflateBound,"DEBND")
+# pragma map(inflateInit_,"ININ")
+# pragma map(inflateInit2_,"ININ2")
+# pragma map(inflateEnd,"INEND")
+# pragma map(inflateSync,"INSY")
+# pragma map(inflateSetDictionary,"INSEDI")
+# pragma map(compressBound,"CMBND")
+# pragma map(inflate_table,"INTABL")
+# pragma map(inflate_fast,"INFA")
+# pragma map(inflate_copyright,"INCOPY")
+#endif
+
+#endif /* ZCONF_H */
generated by cgit v0.12 at 2024-07-04 20:26:26 (GMT)