path: root/generic/tclIOUtil.c

/* 
 * tclIOUtil.c --
 *
 *	This file contains a collection of utility procedures that
 *	are shared by the platform specific IO drivers.
 *
 *	Parts of this file are based on code contributed by Karl
 *	Lehenbauer, Mark Diekhans and Peter da Silva.
 *
 * Copyright (c) 1991-1994 The Regents of the University of California.
 * Copyright (c) 1994-1997 Sun Microsystems, Inc.
 *
 * See the file "license.terms" for information on usage and redistribution
 * of this file, and for a DISCLAIMER OF ALL WARRANTIES.
 *
 * SCCS: @(#) tclIOUtil.c 1.138 98/01/06 11:10:48
 */

#include "tclInt.h"
#include "tclPort.h"


/*
 *---------------------------------------------------------------------------
 *
 * TclGetOpenMode --
 *
 * Description:
 *	Computes a POSIX mode mask for opening a file, from a given string,
 *	and also sets a flag to indicate whether the caller should seek to
 *	EOF after opening the file.
 *
 * Results:
 *	On success, returns mode to pass to "open". If an error occurs, the
 *	return value is -1 and if interp is not NULL, sets interp's result
 *	object to an error message.
 *
 * Side effects:
 *	Sets the integer referenced by seekFlagPtr to 1 to tell the caller
 *	to seek to EOF after opening the file.
 *
 * Special note:
 *	This code is based on a prototype implementation contributed
 *	by Mark Diekhans.
 *
 *---------------------------------------------------------------------------
 */

int
TclGetOpenMode(interp, string, seekFlagPtr)
    Tcl_Interp *interp;			/* Interpreter to use for error
					 * reporting - may be NULL. */
    char *string;			/* Mode string, e.g. "r+" or
					 * "RDONLY CREAT". */
    int *seekFlagPtr;			/* Set this to 1 if the caller
                                         * should seek to EOF during the
                                         * opening of the file. */
{
    int mode, modeArgc, c, i, gotRW;
    char **modeArgv, *flag;
#define RW_MODES (O_RDONLY|O_WRONLY|O_RDWR)

    /*
     * Check for the simpler fopen-like access modes (e.g. "r").  They
     * are distinguished from the POSIX access modes by the presence
     * of a lower-case first letter.
     */

    *seekFlagPtr = 0;
    mode = 0;

    /*
     * Guard against international characters before using byte oriented
     * routines.
     */

    if (!(string[0] & 0x80)
	    && islower(UCHAR(string[0]))) { /* INTL: ISO only. */
	switch (string[0]) {
	    case 'r':
		mode = O_RDONLY;
		break;
	    case 'w':
		mode = O_WRONLY|O_CREAT|O_TRUNC;
		break;
	    case 'a':
		mode = O_WRONLY|O_CREAT;
                *seekFlagPtr = 1;
		break;
	    default:
		error:
                if (interp != (Tcl_Interp *) NULL) {
                    Tcl_AppendResult(interp,
                            "illegal access mode \"", string, "\"",
                            (char *) NULL);
                }
		return -1;
	}
	if (string[1] == '+') {
	    mode &= ~(O_RDONLY|O_WRONLY);
	    mode |= O_RDWR;
	    if (string[2] != 0) {
		goto error;
	    }
	} else if (string[1] != 0) {
	    goto error;
	}
        return mode;
    }

    /*
     * The access modes are specified using a list of POSIX modes
     * such as O_CREAT.
     *
     * IMPORTANT NOTE: We rely on Tcl_SplitList working correctly when
     * a NULL interpreter is passed in.
     */

    if (Tcl_SplitList(interp, string, &modeArgc, &modeArgv) != TCL_OK) {
        if (interp != (Tcl_Interp *) NULL) {
            Tcl_AddErrorInfo(interp,
                    "\n    while processing open access modes \"");
            Tcl_AddErrorInfo(interp, string);
            Tcl_AddErrorInfo(interp, "\"");
        }
        return -1;
    }
    
    gotRW = 0;
    for (i = 0; i < modeArgc; i++) {
	flag = modeArgv[i];
	c = flag[0];
	if ((c == 'R') && (strcmp(flag, "RDONLY") == 0)) {
	    mode = (mode & ~RW_MODES) | O_RDONLY;
	    gotRW = 1;
	} else if ((c == 'W') && (strcmp(flag, "WRONLY") == 0)) {
	    mode = (mode & ~RW_MODES) | O_WRONLY;
	    gotRW = 1;
	} else if ((c == 'R') && (strcmp(flag, "RDWR") == 0)) {
	    mode = (mode & ~RW_MODES) | O_RDWR;
	    gotRW = 1;
	} else if ((c == 'A') && (strcmp(flag, "APPEND") == 0)) {
	    mode |= O_APPEND;
            *seekFlagPtr = 1;
	} else if ((c == 'C') && (strcmp(flag, "CREAT") == 0)) {
	    mode |= O_CREAT;
	} else if ((c == 'E') && (strcmp(flag, "EXCL") == 0)) {
	    mode |= O_EXCL;
	} else if ((c == 'N') && (strcmp(flag, "NOCTTY") == 0)) {
#ifdef O_NOCTTY
	    mode |= O_NOCTTY;
#else
	    if (interp != (Tcl_Interp *) NULL) {
                Tcl_AppendResult(interp, "access mode \"", flag,
                        "\" not supported by this system", (char *) NULL);
            }
            ckfree((char *) modeArgv);
	    return -1;
#endif
	} else if ((c == 'N') && (strcmp(flag, "NONBLOCK") == 0)) {
#if defined(O_NDELAY) || defined(O_NONBLOCK)
#   ifdef O_NONBLOCK
	    mode |= O_NONBLOCK;
#   else
	    mode |= O_NDELAY;
#   endif
#else
            if (interp != (Tcl_Interp *) NULL) {
                Tcl_AppendResult(interp, "access mode \"", flag,
                        "\" not supported by this system", (char *) NULL);
            }
            ckfree((char *) modeArgv);
	    return -1;
#endif
	} else if ((c == 'T') && (strcmp(flag, "TRUNC") == 0)) {
	    mode |= O_TRUNC;
	} else {
            if (interp != (Tcl_Interp *) NULL) {
                Tcl_AppendResult(interp, "invalid access mode \"", flag,
                        "\": must be RDONLY, WRONLY, RDWR, APPEND, CREAT",
                        " EXCL, NOCTTY, NONBLOCK, or TRUNC", (char *) NULL);
            }
	    ckfree((char *) modeArgv);
	    return -1;
	}
    }
    ckfree((char *) modeArgv);
    if (!gotRW) {
        if (interp != (Tcl_Interp *) NULL) {
            Tcl_AppendResult(interp, "access mode must include either",
                    " RDONLY, WRONLY, or RDWR", (char *) NULL);
        }
	return -1;
    }
    return mode;
}

/*
 *----------------------------------------------------------------------
 *
 * Tcl_EvalFile --
 *
 *	Read in a file and process the entire file as one gigantic
 *	Tcl command.
 *
 * Results:
 *	A standard Tcl result, which is either the result of executing
 *	the file or an error indicating why the file couldn't be read.
 *
 * Side effects:
 *	Depends on the commands in the file.
 *
 *----------------------------------------------------------------------
 */

int
Tcl_EvalFile(interp, fileName)
    Tcl_Interp *interp;		/* Interpreter in which to process file. */
    char *fileName;		/* Name of file to process.  Tilde-substitution
				 * will be performed on this name. */
{
    int result, length;
    char *oldScriptFile;
    Interp *iPtr;
    Tcl_DString nameString;
    char *name, *string;
    Tcl_Channel chan;
    Tcl_Obj *objPtr;

    name = Tcl_TranslateFileName(interp, fileName, &nameString);
    if (name == NULL) {
	return TCL_ERROR;
    }

    result = TCL_ERROR;
    objPtr = Tcl_NewObj();

    chan = Tcl_OpenFileChannel(NULL, name, "r", 0);
    if (chan == NULL) {
	Tcl_AppendResult(interp, "couldn't read file \"", fileName,
		"\": ", Tcl_PosixError(interp), (char *) NULL);
	goto end;
    }
    if (Tcl_ReadChars(chan, objPtr, -1, 0) < 0) {
        Tcl_Close(interp, chan);
	Tcl_AppendResult(interp, "couldn't read file \"", fileName,
		"\": ", Tcl_PosixError(interp), (char *) NULL);
	goto end;
    }
    if (Tcl_Close(interp, chan) != TCL_OK) {
        goto end;
    }

    iPtr = (Interp *) interp;
    oldScriptFile = iPtr->scriptFile;
    iPtr->scriptFile = fileName;
    string = Tcl_GetStringFromObj(objPtr, &length);
    result = Tcl_Eval2(interp, string, length, 0);
    iPtr->scriptFile = oldScriptFile;

    if (result == TCL_RETURN) {
	result = TclUpdateReturnInfo(iPtr);
    } else if (result == TCL_ERROR) {
	char msg[200 + TCL_INTEGER_SPACE];

	/*
	 * Record information telling where the error occurred.
	 */

	sprintf(msg, "\n    (file \"%.150s\" line %d)", fileName,
		interp->errorLine);
	Tcl_AddErrorInfo(interp, msg);
    }

    end:
    Tcl_DecrRefCount(objPtr);
    Tcl_DStringFree(&nameString);
    return result;
}

/*
 *----------------------------------------------------------------------
 *
 * Tcl_GetErrno --
 *
 *	Gets the current value of the Tcl error code variable. This is
 *	currently the global variable "errno" but could in the future
 *	change to something else.
 *
 * Results:
 *	The value of the Tcl error code variable.
 *
 * Side effects:
 *	None. Note that the value of the Tcl error code variable is
 *	UNDEFINED if a call to Tcl_SetErrno did not precede this call.
 *
 *----------------------------------------------------------------------
 */

int
Tcl_GetErrno()
{
    return errno;
}

/*
 *----------------------------------------------------------------------
 *
 * Tcl_SetErrno --
 *
 *	Sets the Tcl error code variable to the supplied value.
 *
 * Results:
 *	None.
 *
 * Side effects:
 *	Modifies the value of the Tcl error code variable.
 *
 *----------------------------------------------------------------------
 */

void
Tcl_SetErrno(err)
    int err;			/* The new value. */
{
    errno = err;
}

/*
 *----------------------------------------------------------------------
 *
 * Tcl_PosixError --
 *
 *	This procedure is typically called after UNIX kernel calls
 *	return errors.  It stores machine-readable information about
 *	the error in $errorCode returns an information string for
 *	the caller's use.
 *
 * Results:
 *	The return value is a human-readable string describing the
 *	error.
 *
 * Side effects:
 *	The global variable $errorCode is reset.
 *
 *----------------------------------------------------------------------
 */

char *
Tcl_PosixError(interp)
    Tcl_Interp *interp;		/* Interpreter whose $errorCode variable
				 * is to be changed. */
{
    char *id, *msg;

    msg = Tcl_ErrnoMsg(errno);
    id = Tcl_ErrnoId();
    Tcl_SetErrorCode(interp, "POSIX", id, msg, (char *) NULL);
    return msg;
}