More small documentation improvements.

FossilOrigin-Name: 5c63bca4effecfc3d4a192031a2309d7e648b085

36 files changed, 476 insertions, 354 deletions

diff --git a/doc/button.n b/doc/button.n
index d568246..d4f1af3 100644
--- a/doc/button.n
+++ b/doc/button.n
@@ -57,14 +57,14 @@ The empty string is the default value.
 .OP \-state state State
 Specifies one of three states for the button:  \fBnormal\fR, \fBactive\fR,
 or \fBdisabled\fR.  In normal state the button is displayed using the
-\fBforeground\fR and \fBbackground\fR options.  The active state is
+\fB\-foreground\fR and \fB\-background\fR options.  The active state is
 typically used when the pointer is over the button.  In active state
-the button is displayed using the \fBactiveForeground\fR and
-\fBactiveBackground\fR options.  Disabled state means that the button
+the button is displayed using the \fB\-activeforeground\fR and
+\fB\-activebackground\fR options.  Disabled state means that the button
 should be insensitive:  the default bindings will refuse to activate
 the widget and will ignore mouse button presses.
-In this state the \fBdisabledForeground\fR and
-\fBbackground\fR options determine how the button is displayed.
+In this state the \fB\-disabledforeground\fR and
+\fB\-background\fR options determine how the button is displayed.
 .OP \-width width Width
 Specifies a desired width for the button.
 If an image or bitmap is being displayed in the button then the value is in
@@ -91,12 +91,12 @@ there must not exist a window named \fIpathName\fR, but
 A button is a widget that displays a textual string, bitmap or image.
 If text is displayed, it must all be in a single font, but it
 can occupy multiple lines on the screen (if it contains newlines
-or if wrapping occurs because of the \fBwrapLength\fR option) and
+or if wrapping occurs because of the \fB\-wraplength\fR option) and
 one of the characters may optionally be underlined using the
-\fBunderline\fR option.
+\fB\-underline\fR option.
 It can display itself in either of three different ways, according
 to
-the \fBstate\fR option; 
+the \fB\-state\fR option; 
 it can be made to appear raised, sunken, or flat;
 and it can be made to flash.  When a user invokes the
 button (by pressing mouse button 1 with the cursor over the
@@ -188,18 +188,18 @@ This is the classic Tk
 demonstration:
 .PP
 .CS
-    \fBbutton\fR .b \-text "Hello, World!" \-command exit
-    pack .b
+\fBbutton\fR .b \-text "Hello, World!" \-command exit
+pack .b
 .CE
 .PP
 This example demonstrates how to handle button accelerators:
 .PP
 .CS
-    \fBbutton\fR .b1 \-text Hello \-underline 0
-    \fBbutton\fR .b2 \-text World \-underline 0
-    bind . <Key\-h> {.b1 flash; .b1 invoke}
-    bind . <Key\-w> {.b2 flash; .b2 invoke}
-    pack .b1 .b2
+\fBbutton\fR .b1 \-text Hello \-underline 0
+\fBbutton\fR .b2 \-text World \-underline 0
+bind . <Key\-h> {.b1 flash; .b1 invoke}
+bind . <Key\-w> {.b2 flash; .b2 invoke}
+pack .b1 .b2
 .CE
 .SH "SEE ALSO"
 ttk::button(n)
diff --git a/doc/checkbutton.n b/doc/checkbutton.n
index 4a4d2bd..4d06c68 100644
--- a/doc/checkbutton.n
+++ b/doc/checkbutton.n
@@ -38,7 +38,7 @@ If this option is not specified, the button's desired height is computed
 from the size of the image or bitmap or text being displayed in it.
 .OP \-indicatoron indicatorOn IndicatorOn
 Specifies whether or not the indicator should be drawn.  Must be a
-proper boolean value.  If false, the \fBrelief\fR option is
+proper boolean value.  If false, the \fB\-relief\fR option is
 ignored and the widget's relief is always sunken if the widget is
 selected and raised otherwise.
 .OP \-offrelief offRelief OffRelief
@@ -79,25 +79,25 @@ whenever the widget is selected.
 If specified as an empty string then no special color is used for
 displaying when the widget is selected.
 .OP \-selectimage selectImage SelectImage
-Specifies an image to display (in place of the \fBimage\fR option)
+Specifies an image to display (in place of the \fB\-image\fR option)
 when the checkbutton is selected.
-This option is ignored unless the \fBimage\fR option has been
+This option is ignored unless the \fB\-image\fR option has been
 specified.
 .OP \-state state State
 Specifies one of three states for the checkbutton:  \fBnormal\fR, \fBactive\fR,
 or \fBdisabled\fR.  In normal state the checkbutton is displayed using the
-\fBforeground\fR and \fBbackground\fR options.  The active state is
+\fB\-foreground\fR and \fB\-background\fR options.  The active state is
 typically used when the pointer is over the checkbutton.  In active state
-the checkbutton is displayed using the \fBactiveForeground\fR and
-\fBactiveBackground\fR options.  Disabled state means that the checkbutton
+the checkbutton is displayed using the \fB\-activeforeground\fR and
+\fB\-activebackground\fR options.  Disabled state means that the checkbutton
 should be insensitive:  the default bindings will refuse to activate
 the widget and will ignore mouse button presses.
-In this state the \fBdisabledForeground\fR and
-\fBbackground\fR options determine how the checkbutton is displayed.
+In this state the \fB\-disabledforeground\fR and
+\fB\-background\fR options determine how the checkbutton is displayed.
 .OP \-tristateimage tristateImage TristateImage
-Specifies an image to display (in place of the \fBimage\fR option)
+Specifies an image to display (in place of the \fB\-image\fR option)
 when the checkbutton is in tri-state mode.
-This option is ignored unless the \fBimage\fR option has been
+This option is ignored unless the \fB\-image\fR option has been
 specified.
 .OP \-tristatevalue tristateValue Value
 Specifies the value that causes the checkbutton to display the multi-value
@@ -134,13 +134,13 @@ that displays a textual string, bitmap or image
 and a square called an \fIindicator\fR.
 If text is displayed, it must all be in a single font, but it
 can occupy multiple lines on the screen (if it contains newlines
-or if wrapping occurs because of the \fBwrapLength\fR option) and
+or if wrapping occurs because of the \fB\-wraplength\fR option) and
 one of the characters may optionally be underlined using the
-\fBunderline\fR option.
+\fB\-underline\fR option.
 A checkbutton has
 all of the behavior of a simple button, including the
 following: it can display itself in either of three different
-ways, according to the \fBstate\fR option;
+ways, according to the \fB\-state\fR option;
 it can be made to appear
 raised, sunken, or flat; it can be made to flash; and it invokes
 a Tcl command whenever mouse button 1 is clicked over the
@@ -264,7 +264,8 @@ invoked, if there is one).
 .IP [3]
 When a checkbutton has the input focus, the space key causes the checkbutton
 to be invoked.  Under Windows, there are additional key bindings; plus
-(+) and equal (=) select the button, and minus (\-) deselects the button.
+(\fB+\fR) and equal (\fB=\fR) select the button, and minus (\fB\-\fR)
+deselects the button.
 .PP
 If the checkbutton's state is \fBdisabled\fR then none of the above
 actions occur:  the checkbutton is completely non-responsive.
@@ -276,12 +277,12 @@ individual widgets or by redefining the class bindings.
 This example shows a group of uncoupled checkbuttons.
 .PP
 .CS
-    labelframe .lbl \-text "Steps:"
-    \fBcheckbutton\fR .c1 \-text Lights  \-variable lights
-    \fBcheckbutton\fR .c2 \-text Cameras \-variable cameras
-    \fBcheckbutton\fR .c3 \-text Action! \-variable action
-    pack .c1 .c2 .c3 \-in .lbl
-    pack .lbl
+labelframe .lbl \-text "Steps:"
+\fBcheckbutton\fR .c1 \-text Lights  \-variable lights
+\fBcheckbutton\fR .c2 \-text Cameras \-variable cameras
+\fBcheckbutton\fR .c3 \-text Action! \-variable action
+pack .c1 .c2 .c3 \-in .lbl
+pack .lbl
 .CE
 .SH "SEE ALSO"
 button(n), options(n), radiobutton(n), ttk::checkbutton(n)
diff --git a/doc/clipboard.n b/doc/clipboard.n
index ed62bdf..c987b38 100644
--- a/doc/clipboard.n
+++ b/doc/clipboard.n
@@ -88,7 +88,7 @@ Retrieve data from the clipboard on \fIwindow\fR's display.
 the data is to be returned and should be an atom name such as \fBSTRING\fR
 or \fBFILE_NAME\fR.  \fIType\fR defaults to \fBSTRING\fR.  This command is
 equivalent to
-.QW "\fBselection\fR \fBget \-selection CLIPBOARD\fR" .
+.QW "\fBselection get\fR \fB\-selection CLIPBOARD\fR" .
 .RS
 .PP
 Note that on modern X11 systems, the most useful type to retrieve for
diff --git a/doc/dialog.n b/doc/dialog.n
index e35f33f..bd40321 100644
--- a/doc/dialog.n
+++ b/doc/dialog.n
@@ -30,7 +30,8 @@ Text to appear in the window manager's title bar for the dialog.
 Message to appear in the top portion of the dialog box.
 .TP
 \fIbitmap\fR
-If non-empty, specifies a bitmap to display in the top portion of
+If non-empty, specifies a bitmap (in a form suitable for Tk_GetBitmap)
+to display in the top portion of
 the dialog, to the left of the text.
 If this is an empty string then no bitmap is displayed in the dialog.
 .TP
diff --git a/doc/entry.n b/doc/entry.n
index 649bc73..b115268 100644
--- a/doc/entry.n
+++ b/doc/entry.n
@@ -32,9 +32,9 @@ this option is the empty string, the normal background color is used.
 Specifies the foreground color to use when the entry is disabled.  If
 this option is the empty string, the normal foreground color is used.
 .OP "\-invalidcommand or \-invcmd" invalidCommand InvalidCommand
-Specifies a script to eval when \fBvalidateCommand\fR returns 0.
+Specifies a script to eval when \fB\-validatecommand\fR returns 0.
 Setting it to {} disables this feature (the default).  The best use
-of this option is to set it to \fIbell\fR.  See \fBValidation\fR
+of this option is to set it to \fIbell\fR.  See \fBVALIDATION\fR
 below for more information.
 .OP \-readonlybackground readonlyBackground ReadonlyBackground
 Specifies the background color to use when the entry is readonly.  If
@@ -64,15 +64,15 @@ be displayed in a different color, depending on the values of the
 Specifies the mode in which validation should operate: \fBnone\fR,
 \fBfocus\fR, \fBfocusin\fR, \fBfocusout\fR, \fBkey\fR, or \fBall\fR.
 It defaults to \fBnone\fR.  When you want validation, you must explicitly
-state which mode you wish to use.  See \fBValidation\fR below for more.
+state which mode you wish to use.  See \fBVALIDATION\fR below for more.
 .OP "\-validatecommand or \-vcmd" validateCommand ValidateCommand
 Specifies a script to eval when you want to validate the input into
 the entry widget.  Setting it to {} disables this feature (the default).
 This command must return a valid Tcl boolean value.  If it returns 0 (or
 the valid Tcl boolean equivalent) then it means you reject the new edition
-and it will not occur and the \fBinvalidCommand\fR will be evaluated if it
+and it will not occur and the \fB\-invalidcommand\fR will be evaluated if it
 is set. If it returns 1, then the new edition occurs.
-See \fBValidation\fR below for more information.
+See \fBVALIDATION\fR below for more information.
 .OP \-width width Width
 Specifies an integer value indicating the desired width of the entry window,
 in average-size characters of the widget's font.
@@ -96,7 +96,7 @@ allows that string to be edited using widget commands described below, which
 are typically bound to keystrokes and mouse actions.
 When first created, an entry's string is empty.
 A portion of the entry may be selected as described below.
-If an entry is exporting its selection (see the \fBexportSelection\fR
+If an entry is exporting its selection (see the \fB\-exportselection\fR
 option), then it will observe the standard X11 protocols for handling the
 selection;  entry selections are available as type \fBSTRING\fR.
 Entries also observe the standard Tk rules for dealing with the
@@ -108,31 +108,31 @@ Entries are capable of displaying strings that are too long to
 fit entirely within the widget's window.  In this case, only a
 portion of the string will be displayed;  commands described below
 may be used to change the view in the window.  Entries use
-the standard \fBxScrollCommand\fR mechanism for interacting with
-scrollbars (see the description of the \fBxScrollCommand\fR option
+the standard \fB\-xscrollcommand\fR mechanism for interacting with
+scrollbars (see the description of the \fB\-xscrollcommand\fR option
 for details).  They also support scanning, as described below.
 .SH VALIDATION
 .PP
-Validation works by setting the \fBvalidateCommand\fR
-option to a script which will be evaluated according to the \fBvalidate\fR
-option as follows:
+Validation works by setting the \fB\-validatecommand\fR option to a
+script (\fIvalidateCommand\fR) which will be evaluated according to
+the \fB\-validate\fR option as follows:
 .PP
 .IP \fBnone\fR 10
 Default.  This means no validation will occur.
 .IP \fBfocus\fR 10
-\fBvalidateCommand\fR will be called when the entry receives or
+\fIvalidateCommand\fR will be called when the entry receives or
 loses focus.
 .IP \fBfocusin\fR 10
-\fBvalidateCommand\fR will be called when the entry receives focus.
+\fIvalidateCommand\fR will be called when the entry receives focus.
 .IP \fBfocusout\fR 10
-\fBvalidateCommand\fR will be called when the entry loses focus.
+\fIvalidateCommand\fR will be called when the entry loses focus.
 .IP \fBkey\fR 10
-\fBvalidateCommand\fR will be called when the entry is edited.
+\fIvalidateCommand\fR will be called when the entry is edited.
 .IP \fBall\fR 10
-\fBvalidateCommand\fR will be called for all above conditions.
+\fIvalidateCommand\fR will be called for all above conditions.
 .PP
-It is possible to perform percent substitutions on the \fBvalidateCommand\fR
-and \fBinvalidCommand\fR,
+It is possible to perform percent substitutions on the value of the
+\fB\-validatecommand\fR and \fB\-invalidcommand\fR options,
 just as you would in a \fBbind\fR script.  The following substitutions
 are recognized:
 .PP
@@ -157,32 +157,32 @@ The type of validation that triggered the callback
 .IP \fB%W\fR 5
 The name of the entry widget.
 .PP
-In general, the \fBtextVariable\fR and \fBvalidateCommand\fR can be
+In general, the \fB\-textvariable\fR and \fB\-validatecommand\fR options can be
 dangerous to mix.  Any problems have been overcome so that using the
-\fBvalidateCommand\fR will not interfere with the traditional behavior of
-the entry widget.  Using the \fBtextVariable\fR for read-only purposes will
+\fB\-validatecommand\fR will not interfere with the traditional behavior of
+the entry widget.  Using the \fB\-textvariable\fR for read-only purposes will
 never cause problems.  The danger comes when you try set the
-\fBtextVariable\fR to something that the \fBvalidateCommand\fR would not
-accept, which causes \fBvalidate\fR to become \fInone\fR (the
-\fBinvalidCommand\fR will not be triggered).  The same happens
-when an error occurs evaluating the \fBvalidateCommand\fR.
+\fB\-textvariable\fR to something that the \fB\-validatecommand\fR would not
+accept, which causes \fB\-validate\fR to become \fInone\fR (the
+\fB\-invalidcommand\fR will not be triggered).  The same happens
+when an error occurs evaluating the \fB\-validatecommand\fR.
 .PP
-Primarily, an error will occur when the \fBvalidateCommand\fR or
-\fBinvalidCommand\fR encounters an error in its script while evaluating or
-\fBvalidateCommand\fR does not return a valid Tcl boolean value.  The
-\fBvalidate\fR option will also set itself to \fBnone\fR when you edit the
-entry widget from within either the \fBvalidateCommand\fR or the
-\fBinvalidCommand\fR.  Such editions will override the one that was being
+Primarily, an error will occur when the \fB\-validatecommand\fR or
+\fB\-invalidcommand\fR encounters an error in its script while evaluating or
+\fB\-validatecommand\fR does not return a valid Tcl boolean value.  The
+\fB\-validate\fR option will also set itself to \fBnone\fR when you edit the
+entry widget from within either the \fB\-validatecommand\fR or the
+\fB\-invalidcommand\fR.  Such editions will override the one that was being
 validated.  If you wish to edit the entry widget (for example set it to {})
-during validation and still have the \fBvalidate\fR option set, you should
+during validation and still have the \fB\-validate\fR option set, you should
 include the command
 .CS
 after idle {%W config \-validate %v}
 .CE
-in the \fBvalidateCommand\fR or \fBinvalidCommand\fR (whichever one you
+in the \fB\-validatecommand\fR or \fB\-invalidcommand\fR (whichever one you
 were editing the entry widget from).  It is also recommended to not set an
-associated \fBtextVariable\fR during validation, as that can cause the
-entry widget to become out of sync with the \fBtextVariable\fR.
+associated \fB\-textvariable\fR during validation, as that can cause the
+entry widget to become out of sync with the \fB\-textvariable\fR.
 .SH "WIDGET COMMAND"
 .PP
 The \fBentry\fR command creates a new Tcl command whose
@@ -369,9 +369,9 @@ Returns an empty string.
 .RE
 .TP
 \fIpathName \fBvalidate\fR
-This command is used to force an evaluation of the \fBvalidateCommand\fR
-independent of the conditions specified by the \fBvalidate\fR option.
-This is done by temporarily setting the \fBvalidate\fR option to \fBall\fR.
+This command is used to force an evaluation of the \fB\-validatecommand\fR
+independent of the conditions specified by the \fB\-validate\fR option.
+This is done by temporarily setting the \fB\-validate\fR option to \fBall\fR.
 It returns 0 or 1.
 .TP
 \fIpathName \fBxview \fIargs\fR
diff --git a/doc/font.n b/doc/font.n
index 6a2c21e..763b63e 100644
--- a/doc/font.n
+++ b/doc/font.n
@@ -53,7 +53,7 @@ possible attributes.
 .RS
 .PP
 Note that on Aqua/Mac OS X, the system fonts (see
-\fBPLATFORM-SPECIFIC FONTS\fR below) may not be actually altered because they
+\fBPLATFORM SPECIFIC FONTS\fR below) may not be actually altered because they
 are implemented by the system theme. To achieve the effect of modification,
 use \fBfont actual\fR to get their configuration and \fBfont create\fR to
 synthesize a copy of the font which can be modified.
@@ -110,7 +110,7 @@ below for a list of the possible metrics.
 .TP
 \fBfont names\fR
 The return value is a list of all the named fonts that are currently defined.
-.SH "FONT DESCRIPTION"
+.SH "FONT DESCRIPTIONS"
 .PP
 The following formats are accepted as a font description anywhere
 \fIfont\fR is specified as an argument above; these same forms are also
@@ -131,7 +131,7 @@ The platform-specific name of a font, interpreted by the graphics server.
 This also includes, under X, an XLFD (see [4]) for which a single
 .QW \fB*\fR
 character was used to elide more than one field in the middle of the
-name.  See \fBPLATFORM-SPECIFIC\fR issues for a list of the system fonts.
+name.  See \fBPLATFORM SPECIFIC FONTS\fR for a list of the system fonts.
 .TP
 [3] \fIfamily \fR?\fIsize\fR? ?\fIstyle\fR? ?\fIstyle ...\fR?
 .
@@ -338,7 +338,7 @@ This font should be used for tooltip windows (transient information windows).
 It is \fInot\fR advised to change these fonts, as they may be modified by Tk
 itself in response to system changes. Instead, make a copy of the font and
 modify that.
-.SH "PLATFORM-SPECIFIC FONTS"
+.SH "PLATFORM SPECIFIC FONTS"
 .PP
 The following system fonts are supported:
 .TP
diff --git a/doc/frame.n b/doc/frame.n
index 2222f89..6bf4a1b 100644
--- a/doc/frame.n
+++ b/doc/frame.n
@@ -20,7 +20,7 @@ frame \- Create and manipulate frame widgets
 .SE
 .SH "WIDGET-SPECIFIC OPTIONS"
 .OP \-background background Background
-This option is the same as the standard \fBbackground\fR option
+This option is the same as the standard \fB\-background\fR option
 except that its value may also be specified as an empty string.
 In this case, the widget will display no background or border, and
 no colors will be consumed from its colormap for its background
@@ -30,7 +30,7 @@ Specifies a class for the window.
 This class will be used when querying the option database for
 the window's other options, and it will also be used later for
 other purposes such as bindings.
-The \fBclass\fR option may not be changed with the \fBconfigure\fR
+The \fB\-class\fR option may not be changed with the \fBconfigure\fR
 widget command.
 .OP \-colormap colormap Colormap
 Specifies a colormap to use for the window.
@@ -39,7 +39,7 @@ created for the window and its children, or the name of another
 window (which must be on the same screen and have the same visual
 as \fIpathName\fR), in which case the new window will use the colormap
 from the specified window.
-If the \fBcolormap\fR option is not specified, the new window
+If the \fB\-colormap\fR option is not specified, the new window
 uses the same colormap as its parent.
 This option may not be changed with the \fBconfigure\fR
 widget command.
@@ -52,7 +52,7 @@ things like geometry requests.  The window should not have any
 children of its own in this application.
 This option may not be changed with the \fBconfigure\fR
 widget command.
-Note that \fB-borderwidth\fR, \fB-padx\fR and \fB-pady\fR are ignored when
+Note that \fB\-borderwidth\fR, \fB\-padx\fR and \fB\-pady\fR are ignored when
 configured as a container since a container has no border.
 .OP \-height height Height
 Specifies the desired height for the window in any of the forms
@@ -67,7 +67,7 @@ Specifies visual information for the new window in any of the
 forms accepted by \fBTk_GetVisual\fR.
 If this option is not specified, the new window will use the same
 visual as its parent.
-The \fBvisual\fR option may not be modified with the \fBconfigure\fR
+The \fB\-visual\fR option may not be modified with the \fBconfigure\fR
 widget command.
 .OP \-width width Width
 Specifies the desired width for the window in any of the forms
diff --git a/doc/grid.n b/doc/grid.n
index 981d939..aa949c5 100644
--- a/doc/grid.n
+++ b/doc/grid.n
@@ -182,7 +182,7 @@ east, or west) that the slave will
 .QW stick
 to.  If both \fBn\fR and \fBs\fR (or \fBe\fR and \fBw\fR) are
 specified, the slave will be stretched to fill the entire
-height (or width) of its cavity.  The \fBsticky\fR option subsumes the
+height (or width) of its cavity.  The \fB\-sticky\fR option subsumes the
 combination of \fB\-anchor\fR and \fB\-fill\fR that is used by \fBpack\fR.
 The default is
 .QW "" ,
@@ -282,8 +282,8 @@ values are retained.
 .
 Returns the size of the grid (in columns then rows) for \fImaster\fR.
 The size is determined either by the \fIslave\fR occupying the largest
-row or column, or the largest column or row with a \fBminsize\fR,
-\fBweight\fR, or \fBpad\fR that is non-zero.
+row or column, or the largest column or row with a \fB\-minsize\fR,
+\fB\-weight\fR, or \fB\-pad\fR that is non-zero.
 .TP
 \fBgrid slaves \fImaster\fR ?\fI\-option value\fR?
 .
@@ -301,7 +301,7 @@ added, or removed without the need to explicitly specify row and
 column information.
 When no column or row information is specified for a \fIslave\fR,
 default values are chosen for
-\fBcolumn\fR, \fBrow\fR, \fBcolumnspan\fR and \fBrowspan\fR
+\fB\-column\fR, \fB\-row\fR, \fB\-columnspan\fR and \fB\-rowspan\fR
 at the time the \fIslave\fR is managed. The values are chosen
 based upon the current layout of the grid, the position of the \fIslave\fR
 relative to other \fIslave\fRs in the same grid command, and the presence
@@ -311,8 +311,8 @@ command where \fIslave\fR names are normally expected.
 .TP
 \fB\-\fR
 .
-This increases the columnspan of the \fIslave\fR to the left.  Several
-\fB\-\fR's in a row will successively increase the columnspan. A \fB\-\fR
+This increases the \fB\-columnspan\fR of the \fIslave\fR to the left.  Several
+\fB\-\fR's in a row will successively increase the number of columns spanned. A \fB\-\fR
 may not follow a \fB^\fR or a \fBx\fR, nor may it be the first \fIslave\fR
 argument to \fBgrid configure\fR.
 .TP
@@ -323,7 +323,7 @@ the \fIslave\fR on the right.
 .TP
 \fB^\fR
 .
-This extends the \fBrowspan\fR of the \fIslave\fR above the \fB^\fR's
+This extends the \fB\-rowspan\fR of the \fIslave\fR above the \fB^\fR's
 in the grid.  The number of \fB^\fR's in a row must match the number of
 columns spanned by the \fIslave\fR above it.
 .RE
@@ -340,12 +340,12 @@ For the final step, each slave is positioned in its row(s) and column(s)
 based on the setting of its \fIsticky\fR flag.
 .PP
 To compute the minimum size of a layout, the grid geometry manager
-first looks at all slaves whose columnspan and rowspan values are one,
+first looks at all slaves whose \fB\-columnspan\fR and \fB\-rowspan\fR values are one,
 and computes the nominal size of each row or column to be either the
 \fIminsize\fR for that row or column, or the sum of the \fIpad\fRding
 plus the size of the largest slave, whichever is greater.  After that
 the rows or columns in each uniform group adapt to each other.  Then
-the slaves whose rowspans or columnspans are greater than one are
+the slaves whose row-spans or column-spans are greater than one are
 examined.  If a group of rows or columns need to be increased in size
 in order to accommodate these slaves, then extra space is added to each
 row or column in the group according to its \fIweight\fR.  For each
diff --git a/doc/label.n b/doc/label.n
index c7c84ca..7d768f5 100644
--- a/doc/label.n
+++ b/doc/label.n
@@ -34,10 +34,10 @@ from the size of the image or bitmap or text being displayed in it.
 .OP \-state state State
 Specifies one of three states for the label:  \fBnormal\fR, \fBactive\fR,
 or \fBdisabled\fR.  In normal state the button is displayed using the
-\fBforeground\fR and \fBbackground\fR options.  In active state
-the label is displayed using the \fBactiveForeground\fR and
-\fBactiveBackground\fR options.  In the disabled state the
-\fBdisabledForeground\fR and \fBbackground\fR options determine how
+\fB\-foreground\fR and \fB\-background\fR options.  In active state
+the label is displayed using the \fB\-activeforeground\fR and
+\fB\-activebackground\fR options.  In the disabled state the
+\fB\-disabledforeground\fR and \fB\-background\fR options determine how
 the button is displayed.
 .OP \-width width Width
 Specifies a desired width for the label.
@@ -63,9 +63,9 @@ there must not exist a window named \fIpathName\fR, but
 A label is a widget that displays a textual string, bitmap or image.
 If text is displayed, it must all be in a single font, but it
 can occupy multiple lines on the screen (if it contains newlines
-or if wrapping occurs because of the \fBwrapLength\fR option) and
+or if wrapping occurs because of the \fB\-wraplength\fR option) and
 one of the characters may optionally be underlined using the
-\fBunderline\fR option.
+\fB\-underline\fR option.
 The label can be manipulated in a few simple ways, such as
 changing its relief or text, using the commands described below.
 .SH "WIDGET COMMAND"
diff --git a/doc/labelframe.n b/doc/labelframe.n
index 2c05b54..2bb865d 100644
--- a/doc/labelframe.n
+++ b/doc/labelframe.n
@@ -21,7 +21,7 @@ labelframe \- Create and manipulate labelframe widgets
 .SE
 .SH "WIDGET-SPECIFIC OPTIONS"
 .OP \-background background Background
-This option is the same as the standard \fBbackground\fR option
+This option is the same as the standard \fB\-background\fR option
 except that its value may also be specified as an empty string.
 In this case, the widget will display no background or border, and
 no colors will be consumed from its colormap for its background
@@ -31,7 +31,7 @@ Specifies a class for the window.
 This class will be used when querying the option database for
 the window's other options, and it will also be used later for
 other purposes such as bindings.
-The \fBclass\fR option may not be changed with the \fBconfigure\fR
+The \fB\-class\fR option may not be changed with the \fBconfigure\fR
 widget command.
 .OP \-colormap colormap Colormap
 Specifies a colormap to use for the window.
@@ -40,7 +40,7 @@ created for the window and its children, or the name of another
 window (which must be on the same screen and have the same visual
 as \fIpathName\fR), in which case the new window will use the colormap
 from the specified window.
-If the \fBcolormap\fR option is not specified, the new window
+If the \fB\-colormap\fR option is not specified, the new window
 uses the same colormap as its parent.
 This option may not be changed with the \fBconfigure\fR
 widget command.
@@ -66,7 +66,7 @@ Specifies visual information for the new window in any of the
 forms accepted by \fBTk_GetVisual\fR.
 If this option is not specified, the new window will use the same
 visual as its parent.
-The \fBvisual\fR option may not be modified with the \fBconfigure\fR
+The \fB\-visual\fR option may not be modified with the \fBconfigure\fR
 widget command.
 .OP \-width width Width
 Specifies the desired width for the window in any of the forms
diff --git a/doc/listbox.n b/doc/listbox.n
index 8150cba..709b702 100644
--- a/doc/listbox.n
+++ b/doc/listbox.n
@@ -75,7 +75,7 @@ When first created, a new listbox has no elements.
 Elements may be added or deleted using widget commands described
 below.  In addition, one or more elements may be selected as described
 below.
-If a listbox is exporting its selection (see \fBexportSelection\fR
+If a listbox is exporting its selection (see \fB\-exportselection\fR
 option), then it will observe the standard X11 protocols
 for handling the selection.
 Listbox selections are available as type \fBSTRING\fR;
@@ -85,8 +85,8 @@ newlines separating the elements.
 It is not necessary for all the elements to be
 displayed in the listbox window at once;  commands described below
 may be used to change the view in the window.  Listboxes allow
-scrolling in both directions using the standard \fBxScrollCommand\fR
-and \fByScrollCommand\fR options.
+scrolling in both directions using the standard \fB\-xscrollcommand\fR
+and \fB\-yscrollcommand\fR options.
 They also support scanning, as described below.
 .SH "INDICES"
 .PP
@@ -96,20 +96,24 @@ An index specifies a particular element of the listbox, in any of
 the following ways:
 .TP 12
 \fInumber\fR
+.
 Specifies the element as a numerical index, where 0 corresponds
 to the first element in the listbox.
 .TP 12
 \fBactive\fR
+.
 Indicates the element that has the location cursor.  This element
 will be displayed as specified by \fB\-activestyle\fR when the listbox
 has the keyboard focus, and it is specified with the \fBactivate\fR
 widget command.
 .TP 12
 \fBanchor\fR
+.
 Indicates the anchor point for the selection, which is set with the
 \fBselection anchor\fR widget command.
 .TP 12
 \fBend\fR
+.
 Indicates the end of the listbox.
 For most commands this refers to the last element in the listbox,
 but for a few commands such as \fBindex\fR and \fBinsert\fR
@@ -138,6 +142,7 @@ determine the exact behavior of the command.  The following
 commands are possible for listbox widgets:
 .TP
 \fIpathName \fBactivate\fR \fIindex\fR
+.
 Sets the active element to the one indicated by \fIindex\fR.
 If \fIindex\fR is outside the range of elements in the listbox
 then the closest element is activated.
@@ -146,6 +151,7 @@ widget has the input focus, and its index may be retrieved with the
 index \fBactive\fR.
 .TP
 \fIpathName \fBbbox\fR \fIindex\fR
+.
 Returns a list of four numbers describing the bounding box of
 the text in the element given by \fIindex\fR.
 The first two elements of the list give the x and y coordinates
@@ -160,12 +166,14 @@ partially visible, the result gives the full area of the element,
 including any parts that are not visible.
 .TP
 \fIpathName \fBcget\fR \fIoption\fR
+.
 Returns the current value of the configuration option given
 by \fIoption\fR.
 \fIOption\fR may have any of the values accepted by the \fBlistbox\fR
 command.
 .TP
 \fIpathName \fBconfigure\fR ?\fIoption\fR? ?\fIvalue option value ...\fR?
+.
 Query or modify the configuration options of the widget.
 If no \fIoption\fR is specified, returns a list describing all of
 the available options for \fIpathName\fR (see \fBTk_ConfigureInfo\fR for
@@ -180,18 +188,21 @@ this case the command returns an empty string.
 command.
 .TP
 \fIpathName \fBcurselection\fR
+.
 Returns a list containing the numerical indices of
 all of the elements in the listbox that are currently selected.
 If there are no elements selected in the listbox then an empty
 string is returned.
 .TP
 \fIpathName \fBdelete \fIfirst \fR?\fIlast\fR?
+.
 Deletes one or more elements of the listbox.  \fIFirst\fR and \fIlast\fR
 are indices specifying the first and last elements in the range
 to delete.  If \fIlast\fR is not specified it defaults to
 \fIfirst\fR, i.e. a single element is deleted.
 .TP
 \fIpathName \fBget \fIfirst\fR ?\fIlast\fR?
+.
 If \fIlast\fR is omitted, returns the contents of the listbox
 element indicated by \fIfirst\fR,
 or an empty string if \fIfirst\fR refers to a non-existent element.
@@ -202,22 +213,26 @@ Both \fIfirst\fR and \fIlast\fR may have any of the standard
 forms for indices.
 .TP
 \fIpathName \fBindex \fIindex\fR
+.
 Returns the integer index value that corresponds to \fIindex\fR.
 If \fIindex\fR is \fBend\fR the return value is a count of the number
 of elements in the listbox (not the index of the last element).
 .TP
 \fIpathName \fBinsert \fIindex \fR?\fIelement element ...\fR?
+.
 Inserts zero or more new elements in the list just before the
 element given by \fIindex\fR.  If \fIindex\fR is specified as
 \fBend\fR then the new elements are added to the end of the
 list.  Returns an empty string.
 .TP
 \fIpathName \fBitemcget \fIindex option\fR
+.
 Returns the current value of the item configuration option given
 by \fIoption\fR. \fIOption\fR may have any of the values accepted 
-by the \fBlistbox itemconfigure\fR command.
+by the \fBitemconfigure\fR command.
 .TP
 \fIpathName \fBitemconfigure \fIindex\fR ?\fIoption\fR? ?\fIvalue\fR? ?\fIoption value ...\fR?
+.
 Query or modify the configuration options of an item in the listbox.
 If no \fIoption\fR is specified, returns a list describing all of
 the available options for the item (see \fBTk_ConfigureInfo\fR for
@@ -232,40 +247,48 @@ are currently supported for items:
 .RS
 .TP
 \fB\-background \fIcolor\fR
+.
 \fIColor\fR specifies the background color to use when displaying the 
 item. It may have any of the forms accepted by \fBTk_GetColor\fR.
 .TP
 \fB\-foreground \fIcolor\fR
+.
 \fIColor\fR specifies the foreground color to use when displaying the
 item. It may have any of the forms accepted by \fBTk_GetColor\fR.
 .TP
 \fB\-selectbackground \fIcolor\fR
+.
 \fIcolor\fR specifies the background color to use when displaying the
 item while it is selected. It may have any of the forms accepted by
 \fBTk_GetColor\fR.
 .TP
 \fB\-selectforeground \fIcolor\fR
+.
 \fIcolor\fR specifies the foreground color to use when displaying the
 item while it is selected. It may have any of the forms accepted by
 \fBTk_GetColor\fR.
 .RE
 .TP
 \fIpathName \fBnearest \fIy\fR
+.
 Given a y-coordinate within the listbox window, this command returns
 the index of the (visible) listbox element nearest to that y-coordinate.
 .TP
 \fIpathName \fBscan\fR \fIoption args\fR
+.
 This command is used to implement scanning on listboxes.  It has
 two forms, depending on \fIoption\fR:
 .RS
 .TP
 \fIpathName \fBscan mark \fIx y\fR
+.
 Records \fIx\fR and \fIy\fR and the current view in the listbox
 window;  used in conjunction with later \fBscan dragto\fR commands.
 Typically this command is associated with a mouse button press in
 the widget.  It returns an empty string.
 .TP
 \fIpathName \fBscan dragto \fIx y\fR.
+.
 This command computes the difference between its \fIx\fR and \fIy\fR
 arguments and the \fIx\fR and \fIy\fR arguments to the last
 \fBscan mark\fR command for the widget.
@@ -277,6 +300,7 @@ value is an empty string.
 .RE
 .TP
 \fIpathName \fBsee \fIindex\fR
+.
 Adjust the view in the listbox so that the element given by \fIindex\fR
 is visible.
 If the element is already visible then the command has no effect;
@@ -285,11 +309,13 @@ scrolls to bring the element into view at the edge;  otherwise
 the listbox scrolls to center the element.
 .TP
 \fIpathName \fBselection \fIoption arg\fR
+.
 This command is used to adjust the selection within a listbox.  It
 has several forms, depending on \fIoption\fR:
 .RS
 .TP
 \fIpathName \fBselection anchor \fIindex\fR
+.
 Sets the selection anchor to the element given by \fIindex\fR.
 If \fIindex\fR refers to a non-existent element, then the closest
 element is used.
@@ -299,32 +325,38 @@ The index \fBanchor\fR may be used to refer to the anchor
 element.
 .TP
 \fIpathName \fBselection clear \fIfirst \fR?\fIlast\fR?
+.
 If any of the elements between \fIfirst\fR and \fIlast\fR
 (inclusive) are selected, they are deselected.
 The selection state is not changed for elements outside
 this range.
 .TP
 \fIpathName \fBselection includes \fIindex\fR
+.
 Returns 1 if the element indicated by \fIindex\fR is currently
 selected, 0 if it is not.
 .TP
 \fIpathName \fBselection set \fIfirst \fR?\fIlast\fR?
+.
 Selects all of the elements in the range between
 \fIfirst\fR and \fIlast\fR, inclusive, without affecting
 the selection state of elements outside that range.
 .RE
 .TP
 \fIpathName \fBsize\fR
+.
 Returns a decimal string indicating the total number of elements
 in the listbox.
 .TP
-\fIpathName \fBxview \fIargs\fR
+\fIpathName \fBxview \fR?\fIargs\fR
+.
 This command is used to query and change the horizontal position of the
 information in the widget's window.  It can take any of the following
 forms:
 .RS
 .TP
 \fIpathName \fBxview\fR
+.
 Returns a list containing two elements.
 Each element is a real fraction between 0 and 1;  together they describe
 the horizontal span that is visible in the window.
@@ -334,17 +366,20 @@ in the window, and 40% of the text is off-screen to the right.
 These are the same values passed to scrollbars via the \fB\-xscrollcommand\fR
 option.
 .TP
-\fIpathName \fBxview\fR \fIindex\fR
+\fIpathName \fBxview \fIindex\fR
+.
 Adjusts the view in the window so that the character position given by
 \fIindex\fR is displayed at the left edge of the window.
 Character positions are defined by the width of the character \fB0\fR.
 .TP
 \fIpathName \fBxview moveto\fI fraction\fR
+.
 Adjusts the view in the window so that \fIfraction\fR of the
 total width of the listbox text is off-screen to the left.
 \fIfraction\fR must be a fraction between 0 and 1.
 .TP
 \fIpathName \fBxview scroll \fInumber what\fR
+.
 This command shifts the view in the window left or right according to
 \fInumber\fR and \fIwhat\fR.
 \fINumber\fR must be an integer.
@@ -359,7 +394,8 @@ become visible;  if it is positive then characters farther to the right
 become visible.
 .RE
 .TP
-\fIpathName \fByview \fI?args\fR?
+\fIpathName \fByview \fR?\fIargs\fR?
+.
 This command is used to query and change the vertical position of the
 text in the widget's window.
 It can take any of the following forms:
@@ -376,11 +412,13 @@ the last one in the window, relative to the listbox as a whole.
 These are the same values passed to scrollbars via the \fB\-yscrollcommand\fR
 option.
 .TP
-\fIpathName \fByview\fR \fIindex\fR
+\fIpathName \fByview \fIindex\fR
+.
 Adjusts the view in the window so that the element given by
 \fIindex\fR is displayed at the top of the window.
 .TP
 \fIpathName \fByview moveto\fI fraction\fR
+.
 Adjusts the view in the window so that the element given by \fIfraction\fR
 appears at the top of the window.
 \fIFraction\fR is a fraction between 0 and 1;  0 indicates the first
@@ -388,6 +426,7 @@ element in the listbox, 0.33 indicates the element one-third the
 way through the listbox, and so on.
 .TP
 \fIpathName \fByview scroll \fInumber what\fR
+.
 This command adjusts the view in the window up or down according to
 \fInumber\fR and \fIwhat\fR.
 \fINumber\fR must be an integer.
@@ -403,7 +442,7 @@ become visible.
 .PP
 Tk automatically creates class bindings for listboxes that give them
 Motif-like behavior.  Much of the behavior of a listbox is determined
-by its \fBselectMode\fR option, which selects one of four ways
+by its \fB\-selectmode\fR option, which selects one of four ways
 of dealing with the selection.
 .PP
 If the selection mode is \fBsingle\fR or \fBbrowse\fR, at most one
diff --git a/doc/menu.n b/doc/menu.n
index 59ed82b..1d13404 100644
--- a/doc/menu.n
+++ b/doc/menu.n
@@ -207,7 +207,7 @@ supported on Windows.
 .SS "TEAR-OFF ENTRIES"
 .PP
 A tear-off entry appears at the top of the menu if enabled with the
-\fBtearOff\fR option.  It is not like other menu entries in that
+\fB\-tearoff\fR option.  It is not like other menu entries in that
 it cannot be created with the \fBadd\fR widget command and
 cannot be deleted with the \fBdelete\fR widget command.
 When a tear-off entry is created it appears as a dashed line at
@@ -350,7 +350,7 @@ indicates the top-most entry in the window.
 If the index does not satisfy one of the above forms then this
 form is used.  \fIPattern\fR is pattern-matched against the label of
 each entry in the menu, in order from the top down, until a
-matching entry is found.  The rules of \fBTcl_StringMatch\fR
+matching entry is found.  The rules of \fBstring match\fR
 are used.
 .PP
 The following widget commands are possible for menu widgets:
@@ -374,14 +374,14 @@ are present, they specify the options listed in the \fBMENU ENTRY OPTIONS\fR
 section below.
 The \fBadd\fR widget command returns an empty string.
 .TP
-\fIpathName \fBcget\fR \fIoption\fR
+\fIpathName \fBcget \fIoption\fR
 .
 Returns the current value of the configuration option given
 by \fIoption\fR.
 \fIOption\fR may have any of the values accepted by the \fBmenu\fR
 command.
 .TP
-\fIpathName\fR \fBclone\fR \fInewPathname\fR ?\fIcloneType\fR?
+\fIpathName \fBclone \fInewPathname\fR ?\fIcloneType\fR?
 .
 Makes a clone of the current menu named \fInewPathName\fR. This clone
 is a menu in its own right, but any changes to the clone are
@@ -411,9 +411,9 @@ Delete all of the menu entries between \fIindex1\fR and
 \fIindex2\fR inclusive.
 If \fIindex2\fR is omitted then it defaults to \fIindex1\fR.
 Attempts to delete a tear-off menu entry are ignored (instead, you
-should change the \fBtearOff\fR option to remove the tear-off entry).
+should change the \fB\-tearoff\fR option to remove the tear-off entry).
 .TP
-\fIpathName \fBentrycget\fR \fIindex option\fR
+\fIpathName \fBentrycget \fIindex option\fR
 .
 Returns the current value of a configuration option for
 the entry given by \fIindex\fR.
@@ -465,7 +465,7 @@ Arrange for the menu to be displayed on the screen at the root-window
 coordinates given by \fIx\fR and \fIy\fR.  These coordinates are
 adjusted if necessary to guarantee that the entire menu is visible on
 the screen.  This command normally returns an empty string.
-If the \fBpostCommand\fR option has been specified, then its value is
+If the \fB\-postcommand\fR option has been specified, then its value is
 executed as a Tcl script before posting the menu and the result of
 that script is returned as the result of the \fBpost\fR widget
 command.
@@ -513,7 +513,7 @@ supported by all entry types.
 Specifies a background color to use for displaying this entry when it
 is active.
 If this option is specified as an empty string (the default), then the
-\fBactiveBackground\fR option for the overall menu is used.
+\fB\-activebackground\fR option for the overall menu is used.
 If the \fBtk_strictMotif\fR variable has been set to request strict
 Motif compliance, then this option is ignored and the \fB\-background\fR
 option is used in its place.
@@ -524,7 +524,7 @@ This option is not available for separator or tear-off entries.
 Specifies a foreground color to use for displaying this entry when it
 is active.
 If this option is specified as an empty string (the default), then the
-\fBactiveForeground\fR option for the overall menu is used.
+\fB\-activeforeground\fR option for the overall menu is used.
 This option is not available for separator or tear-off entries.
 .TP
 \fB\-accelerator \fIvalue\fR
@@ -539,7 +539,7 @@ is not available for separator or tear-off entries.
 Specifies a background color to use for displaying this entry when it
 is in the normal state (neither active nor disabled).
 If this option is specified as an empty string (the default), then the
-\fBbackground\fR option for the overall menu is used.
+\fB\-background\fR option for the overall menu is used.
 This option is not available for separator or tear-off entries.
 .TP
 \fB\-bitmap \fIvalue\fR
@@ -582,7 +582,7 @@ options.
 Specifies the font to use when drawing the label or accelerator
 string in this entry.
 If this option is specified as an empty string (the default) then
-the \fBfont\fR option for the overall menu is used.
+the \fB\-font\fR option for the overall menu is used.
 This option is not available for separator or tear-off entries.
 .TP
 \fB\-foreground \fIvalue\fR
@@ -590,7 +590,7 @@ This option is not available for separator or tear-off entries.
 Specifies a foreground color to use for displaying this entry when it
 is in the normal state (neither active nor disabled).
 If this option is specified as an empty string (the default), then the
-\fBforeground\fR option for the overall menu is used.
+\fB\-foreground\fR option for the overall menu is used.
 This option is not available for separator or tear-off entries.
 .TP
 \fB\-hidemargin \fIvalue\fR
@@ -645,7 +645,7 @@ store in the entry's associated variable when the entry is selected.
 Available only for checkbutton and radiobutton entries.
 Specifies the color to display in the indicator when the entry is
 selected.
-If the value is an empty string (the default) then the \fBselectColor\fR
+If the value is an empty string (the default) then the \fB\-selectcolor\fR
 option for the menu determines the indicator color.
 .TP
 \fB\-selectimage \fIvalue\fR
@@ -662,17 +662,17 @@ been specified.
 .
 Specifies one of three states for the entry:  \fBnormal\fR, \fBactive\fR,
 or \fBdisabled\fR.  In normal state the entry is displayed using the
-\fBforeground\fR option for the menu and the \fBbackground\fR
+\fB\-foreground\fR option for the menu and the \fB\-background\fR
 option from the entry or the menu.
 The active state is typically used when the pointer is over the entry.
-In active state the entry is displayed using the \fBactiveForeground\fR
-option for the menu along with the \fBactivebackground\fR option from
+In active state the entry is displayed using the \fB\-activeforeground\fR
+option for the menu along with the \fB\-activebackground\fR option from
 the entry.  Disabled state means that the entry
 should be insensitive:  the default bindings will refuse to activate
 or invoke the entry.
 In this state the entry is displayed according to the 
-\fBdisabledForeground\fR option for the menu and the
-\fBbackground\fR option from the entry.
+\fB\-disabledforeground\fR option for the menu and the
+\fB\-background\fR option from the entry.
 This option is not available for separator entries.
 .TP
 \fB\-underline \fIvalue\fR
diff --git a/doc/menubutton.n b/doc/menubutton.n
index 74d26c1..c8b0958 100644
--- a/doc/menubutton.n
+++ b/doc/menubutton.n
@@ -53,12 +53,12 @@ Specifies one of three states for the menubutton:  \fBnormal\fR, \fBactive\fR,
 or \fBdisabled\fR.  In normal state the menubutton is displayed using the
 \fBforeground\fR and \fBbackground\fR options.  The active state is
 typically used when the pointer is over the menubutton.  In active state
-the menubutton is displayed using the \fBactiveForeground\fR and
-\fBactiveBackground\fR options.  Disabled state means that the menubutton
+the menubutton is displayed using the \fB\-activeforeground\fR and
+\fB\-activebackground\fR options.  Disabled state means that the menubutton
 should be insensitive:  the default bindings will refuse to activate
 the widget and will ignore mouse button presses.
-In this state the \fBdisabledForeground\fR and
-\fBbackground\fR options determine how the button is displayed.
+In this state the \fB\-disabledforeground\fR and
+\fB\-background\fR options determine how the button is displayed.
 .OP \-width width Width
 Specifies a desired width for the menubutton.
 If an image or bitmap is being displayed in the menubutton then the value is in
@@ -84,9 +84,9 @@ A menubutton is a widget that displays a textual string, bitmap, or image
 and is associated with a menu widget.
 If text is displayed, it must all be in a single font, but it
 can occupy multiple lines on the screen (if it contains newlines
-or if wrapping occurs because of the \fBwrapLength\fR option) and
+or if wrapping occurs because of the \fB\-wraplength\fR option) and
 one of the characters may optionally be underlined using the
-\fBunderline\fR option.  In normal usage, pressing
+\fB\-underline\fR option.  In normal usage, pressing
 mouse button 1 over the menubutton causes the associated menu to
 be posted just underneath the menubutton.  If the mouse is moved over
 the menu before releasing the mouse button, the button release
@@ -117,7 +117,7 @@ operations on the widget.  It has the following general form:
 determine the exact behavior of the command.  The following
 commands are possible for menubutton widgets:
 .TP
-\fIpathName \fBcget\fR \fIoption\fR
+\fIpathName \fBcget \fIoption\fR
 Returns the current value of the configuration option given
 by \fIoption\fR.
 \fIOption\fR may have any of the values accepted by the \fBmenubutton\fR
@@ -168,7 +168,7 @@ When a menubutton is posted, its associated menu claims the input
 focus to allow keyboard traversal of the menu and its submenus.
 See the \fBmenu\fR manual entry for details on these bindings.
 .IP [7]
-If the \fBunderline\fR option has been specified for a menubutton
+If the \fB\-underline\fR option has been specified for a menubutton
 then keyboard traversal may be used to post the menubutton:
 Alt+\fIx\fR, where \fIx\fR is the underlined character (or its
 lower-case or upper-case equivalent), may be typed in any window
diff --git a/doc/message.n b/doc/message.n
index a61ed29..61be2f0 100644
--- a/doc/message.n
+++ b/doc/message.n
@@ -28,37 +28,37 @@ aspect ratio for the text.  The aspect ratio is specified as
 be as wide as it is tall, 200 means the text should
 be twice as wide as it is tall, 50 means the text should
 be twice as tall as it is wide, and so on.
-Used to choose line length for text if \fBwidth\fR option
+Used to choose line length for text if \fB\-width\fR option
 is not specified.
 Defaults to 150.
 .OP \-justify justify Justify
 Specifies how to justify lines of text.
 Must be one of \fBleft\fR, \fBcenter\fR, or \fBright\fR.  Defaults
 to \fBleft\fR.
-This option works together with the \fBanchor\fR, \fBaspect\fR,
-\fBpadX\fR, \fBpadY\fR, and \fBwidth\fR options to provide a variety
+This option works together with the \fB\-anchor\fR, \fB\-aspect\fR,
+\fB\-padx\fR, \fB\-pady\fR, and \fB\-width\fR options to provide a variety
 of arrangements of the text within the window.
-The \fBaspect\fR and \fBwidth\fR options determine the amount of
+The \fB\-aspect\fR and \fB\-width\fR options determine the amount of
 screen space needed to display the text.
-The \fBanchor\fR, \fBpadX\fR, and \fBpadY\fR options determine where this
+The \fB\-anchor\fR, \fB\-padx\fR, and \fB\-pady\fR options determine where this
 rectangular area is displayed within the widget's window, and the
-\fBjustify\fR option determines how each line is displayed within that
+\fB\-justify\fR option determines how each line is displayed within that
 rectangular region.
-For example, suppose \fBanchor\fR is \fBe\fR and \fBjustify\fR is
+For example, suppose \fB\-anchor\fR is \fBe\fR and \fB\-justify\fR is
 \fBleft\fR, and that the message window is much larger than needed
 for the text.
 The text will be displayed so that the left edges of all the lines
-line up and the right edge of the longest line is \fBpadX\fR from
+line up and the right edge of the longest line is \fB\-padx\fR from
 the right side of the window;  the entire text block will be centered
 in the vertical span of the window.
 .OP \-width width Width
 Specifies the length of lines in the window.
 The value may have any of the forms acceptable to \fBTk_GetPixels\fR.
-If this option has a value greater than zero then the \fBaspect\fR
-option is ignored and the \fBwidth\fR option determines the line
+If this option has a value greater than zero then the \fB\-aspect\fR
+option is ignored and the \fB\-width\fR option determines the line
 length.
 If this option has a value less than or equal to zero, then
-the \fBaspect\fR option determines the line length.
+the \fB\-aspect\fR option determines the line length.
 .BE
 .SH DESCRIPTION
 .PP
@@ -111,7 +111,7 @@ operations on the widget.  It has the following general form:
 determine the exact behavior of the command.  The following
 commands are possible for message widgets:
 .TP
-\fIpathName \fBcget\fR \fIoption\fR
+\fIpathName \fBcget \fIoption\fR
 Returns the current value of the configuration option given
 by \fIoption\fR.
 \fIOption\fR may have any of the values accepted by the \fBmessage\fR
diff --git a/doc/options.n b/doc/options.n
index 58d187d..456e1fd 100644
--- a/doc/options.n
+++ b/doc/options.n
@@ -72,18 +72,18 @@ widget.
 Specifies a bitmap to display in the widget, in any of the forms
 acceptable to \fBTk_GetBitmap\fR.
 The exact way in which the bitmap is displayed may be affected by
-other options such as \fBanchor\fR or \fBjustify\fR.
+other options such as \fB\-anchor\fR or \fB\-justify\fR.
 Typically, if this option is specified then it overrides other
 options that specify a textual value to display in the widget
-but this is controlled by the \fBcompound\fR option;
-the \fBbitmap\fR option may be reset to an empty string to re-enable
+but this is controlled by the \fB\-compound\fR option;
+the \fB\-bitmap\fR option may be reset to an empty string to re-enable
 a text display.
-In widgets that support both \fBbitmap\fR and \fBimage\fR options,
-\fBimage\fR will usually override \fBbitmap\fR.
+In widgets that support both \fB\-bitmap\fR and \fB\-image\fR options,
+\fB\-image\fR will usually override \fB\-bitmap\fR.
 .OP "\-borderwidth or \-bd" borderWidth BorderWidth
 Specifies a non-negative value indicating the width
 of the 3-D border to draw around the outside of the widget (if such a
-border is being drawn;  the \fBrelief\fR option typically determines
+border is being drawn;  the \fB\-relief\fR option typically determines
 this).  The value may also be used when drawing 3-D effects in the
 interior of the widget.
 The value may have any of the forms acceptable to \fBTk_GetPixels\fR.
@@ -139,10 +139,10 @@ If the value is zero, no focus highlight is drawn around the widget.
 .OP \-image image Image
 Specifies an image to display in the widget, which must have been
 created with the \fBimage create\fR command.
-Typically, if the \fBimage\fR option is specified then it overrides other
+Typically, if the \fB\-image\fR option is specified then it overrides other
 options that specify a bitmap or textual value to display in the
-widget, though this is controlled by the \fBcompound\fR option;
-the \fBimage\fR option may be reset to an empty string to re-enable
+widget, though this is controlled by the \fB\-compound\fR option;
+the \fB\-image\fR option may be reset to an empty string to re-enable
 a bitmap or text display.
 .OP \-insertbackground insertBackground Foreground
 Specifies the color to use as background in the area covered by the
@@ -169,8 +169,8 @@ in each blink cycle.
 Specifies a  value indicating the total width of the insertion cursor.
 The value may have any of the forms acceptable to \fBTk_GetPixels\fR.
 If a border has been specified for the insertion
-cursor (using the \fBinsertBorderWidth\fR option), the border
-will be drawn inside the width specified by the \fBinsertWidth\fR
+cursor (using the \fB\-insertborderwidth\fR option), the border
+will be drawn inside the width specified by the \fB\-insertwidth\fR
 option.
 .OP \-jump jump Jump
 For widgets with a slider that can be dragged to adjust a value,
@@ -235,7 +235,7 @@ Specifies the number of milliseconds a button or key must be held
 down before it begins to auto-repeat.  Used, for example, on the
 up- and down-arrows in scrollbars.
 .OP \-repeatinterval repeatInterval RepeatInterval
-Used in conjunction with \fBrepeatDelay\fR:  once auto-repeat
+Used in conjunction with \fB\-repeatdelay\fR:  once auto-repeat
 begins, this option determines the number of milliseconds between
 auto-repeats.
 .OP \-selectbackground selectBackground Foreground
@@ -255,7 +255,7 @@ This option is typically used in text widgets, where the information
 in the widget has a natural size (the size of a character) and it makes
 sense for the window's dimensions to be integral numbers of these units.
 These natural window sizes form a grid.
-If the \fBsetGrid\fR option is set to true then the widget will
+If the \fB\-setgrid\fR option is set to true then the widget will
 communicate with the window manager so that when the user interactively
 resizes the top-level window that contains the widget, the dimensions of
 the window will be displayed to the user in grid units and the window
@@ -266,7 +266,7 @@ entry for more details.
 Determines whether the window accepts the focus during keyboard
 traversal (e.g., Tab and Shift-Tab).
 Before setting the focus to a window, the traversal scripts
-consult the value of the \fBtakeFocus\fR option.
+consult the value of the \fB\-takefocus\fR option.
 A value of \fB0\fR means that the window should be skipped entirely
 during keyboard traversal. 
 \fB1\fR means that the window should receive the input
@@ -289,14 +289,14 @@ redefine the keyboard traversal scripts.
 .OP \-text text Text
 Specifies a string to be displayed inside the widget.  The way in which
 the string is displayed depends on the particular widget and may be
-determined by other options, such as \fBanchor\fR or \fBjustify\fR.
+determined by other options, such as \fB\-anchor\fR or \fB\-justify\fR.
 .OP \-textvariable textVariable Variable
 Specifies the name of a global variable.  The value of the variable is a text
 string to be displayed inside the widget;  if the variable value changes
 then the widget will automatically update itself to reflect the new value.
 The way in which the string is displayed in the widget depends on the
 particular widget and may be determined by other options, such as
-\fBanchor\fR or \fBjustify\fR.
+\fB\-anchor\fR or \fB\-justify\fR.
 .OP \-troughcolor troughColor Background
 Specifies the color to use for the rectangular trough areas
 in widgets such as scrollbars and scales.  This option is ignored for
@@ -334,7 +334,7 @@ that is visible in the window, and the second fraction indicates
 the information just after the last portion that is visible.
 The command is
 then passed to the Tcl interpreter for execution.  Typically the
-\fBxScrollCommand\fR option consists of the path name of a scrollbar
+\fB\-xscrollcommand\fR option consists of the path name of a scrollbar
 widget followed by
 .QW set ,
 e.g.
@@ -345,9 +345,9 @@ If this option is not specified, then no command will be executed.
 .OP \-yscrollcommand yScrollCommand ScrollCommand
 Specifies the prefix for a command used to communicate with vertical
 scrollbars.  This option is treated in the same way as the
-\fBxScrollCommand\fR option, except that it is used for vertical
+\fB\-xscrollcommand\fR option, except that it is used for vertical
 scrollbars and is provided by widgets that support vertical scrolling.
-See the description of \fBxScrollCommand\fR for details
+See the description of \fB\-xscrollcommand\fR for details
 on how this option is used.
 .SH "SEE ALSO"
 colors, cursors, font
diff --git a/doc/panedwindow.n b/doc/panedwindow.n
index 50e4e9c..17d5730 100644
--- a/doc/panedwindow.n
+++ b/doc/panedwindow.n
@@ -81,7 +81,8 @@ the panedwindow widget's path name.  \fIOption\fR and the \fIarg\fRs
 determine the exact behavior of the command.  The following
 commands are possible for panedwindow widgets:
 .TP
-\fIpathName \fBadd \fIwindow ?window ...? ?option value ...?\fR
+\fIpathName \fBadd \fIwindow \fR?\fIwindow ...\fR? ?\fIoption value ...\fR?
+.
 Add one or more windows to the panedwindow, each in a separate pane.
 The arguments consist of the names of one or more windows
 followed by pairs of arguments that specify how to manage the windows.
@@ -89,11 +90,13 @@ followed by pairs of arguments that specify how to manage the windows.
 \fBconfigure\fR subcommand.
 .TP
 \fIpathName \fBcget \fIoption\fR
+.
 Returns the current value of the configuration option given by
 \fIoption\fR.  \fIOption\fR may have any of the values accepted by the
 \fBpanedwindow\fR command.
 .TP
-\fIpathName \fBconfigure \fI?option? ?value option value ...?\fR
+\fIpathName \fBconfigure \fR?\fIoption\fR? ?\fIvalue option value ...\fR?
+.
 Query or modify the configuration options of the widget.  If no
 \fIoption\fR is specified, returns a list describing all of the
 available options for \fIpathName\fR (see \fBTk_ConfigureInfo\fR for
@@ -106,11 +109,13 @@ modifies the given widget option(s) to have the given value(s);  in
 this case the command returns an empty string. \fIOption\fR may have
 any of the values accepted by the \fBpanedwindow\fR command.
 .TP
-\fIpathName \fBforget \fIwindow ?window ...?\fR
+\fIpathName \fBforget \fIwindow \fR?\fIwindow ...\fR?
+.
 Remove the pane containing \fIwindow\fR from the panedwindow.  All
 geometry management options for \fIwindow\fR will be forgotten.
 .TP
 \fIpathName \fBidentify \fIx y\fR
+.
 Identify the panedwindow component underneath the point given by
 \fIx\fR and \fIy\fR, in window coordinates.  If the point is over a
 sash or a sash handle, the result is a two element list containing the
@@ -118,53 +123,63 @@ index of the sash or handle, and a word indicating whether it is over
 a sash or a handle, such as {0 sash} or {2 handle}.  If the point is
 over any other part of the panedwindow, the result is an empty list.
 .TP
-\fIpathName \fBproxy \fI?args?\fR
+\fIpathName \fBproxy \fR?\fIargs\fR?
+.
 This command is used to query and change the position of the sash
 proxy, used for rubberband-style pane resizing. It can take any of
 the following forms:
 .RS
 .TP
 \fIpathName \fBproxy coord\fR
+.
 Return a list containing the x and y coordinates of the most recent
 proxy location.
 .TP
 \fIpathName \fBproxy forget\fR
+.
 Remove the proxy from the display.
 .TP
 \fIpathName \fBproxy place \fIx y\fR
+.
 Place the proxy at the given \fIx\fR and \fIy\fR coordinates.  
 .RE
 .TP
-\fIpathName \fBsash \fI?args?\fR
+\fIpathName \fBsash \fR?\fIargs\fR?
 This command is used to query and change the position of sashes in the
 panedwindow.  It can take any of the following forms:
 .RS
 .TP
 \fIpathName \fBsash coord \fIindex\fR
+.
 Return the current x and y coordinate pair for the sash given by
 \fIindex\fR.  \fIIndex\fR must be an integer between 0 and 1 less than
 the number of panes in the panedwindow.  The coordinates given are
 those of the top left corner of the region containing the sash.
 .TP
 \fIpathName \fBsash dragto \fIindex x y\fR
+.
 This command computes the difference between the given coordinates and the
 coordinates given to the last \fBsash mark\fR command for the given
 sash.  It then moves that sash the computed difference.  The return
 value is the empty string.
 .TP
 \fIpathName \fBsash mark \fIindex x y\fR
+.
 Records \fIx\fR and \fIy\fR for the sash given by \fIindex\fR; used in
 conjunction with later \fBsash dragto\fR commands to move the sash.
 .TP
 \fIpathName \fBsash place \fIindex x y\fR
+.
 Place the sash given by \fIindex\fR at the given coordinates.
 .RE
 .TP
 \fIpathName \fBpanecget \fIwindow option\fR
+.
 Query a management option for \fIwindow\fR.  \fIOption\fR may be any
 value allowed by the \fBpaneconfigure\fR subcommand.
 .TP
-\fIpathName \fBpaneconfigure \fIwindow ?option? ?value option value ...?\fR
+\fIpathName \fBpaneconfigure \fIwindow \fR?\fIoption\fR? ?\fIvalue option value ...\fR?
+.
 Query or modify the management options for \fIwindow\fR.  If no
 \fIoption\fR is specified, returns a list describing all of the
 available options for \fIpathName\fR (see \fBTk_ConfigureInfo\fR for
@@ -179,14 +194,17 @@ are supported:
 .RS
 .TP
 \fB\-after \fIwindow\fR
+.
 Insert the window after the window specified.  \fIwindow\fR should be the
 name of a window already managed by \fIpathName\fR.
 .TP
 \fB\-before \fIwindow\fR
+.
 Insert the window before the window specified.  \fIwindow\fR should be
 the name of a window already managed by \fIpathName\fR.
 .TP
 \fB\-height \fIsize\fR
+.
 Specify a height for the window.  The height will be the outer
 dimension of the window including its border, if any.  If \fIsize\fR
 is an empty string, or if \fB\-height\fR is not specified, then the
@@ -195,11 +213,13 @@ height may later be adjusted by the movement of sashes in the
 panedwindow.  \fISize\fR may be any value accepted by \fBTk_GetPixels\fR.
 .TP
 \fB\-hide \fIboolean\fR
+.
 Controls the visibility of a pane.  When the \fIboolean\fR is true
 (according to \fBTcl_GetBoolean\fR) the pane will not be visible, but
 it will still be maintained in the list of panes.
 .TP
 \fB\-minsize \fIn\fR
+.
 Specifies that the size of the window cannot be made less than
 \fIn\fR.  This constraint only affects the size of the widget in the
 paned dimension \(em the x dimension for horizontal panedwindows, the y
@@ -207,16 +227,19 @@ dimension for vertical panedwindows.  May be any value accepted by
 \fBTk_GetPixels\fR.
 .TP
 \fB\-padx \fIn\fR
+.
 Specifies a non-negative value indicating how much extra space to
 leave on each side of the window in the X-direction.  The value may 
 have any of the forms accepted by \fBTk_GetPixels\fR.
 .TP
 \fB\-pady \fIn\fR
+.
 Specifies a non-negative value indicating how much extra space to
 leave on each side of the window in the Y-direction.  The value may 
 have any of the forms accepted by \fBTk_GetPixels\fR.
 .TP
 \fB\-sticky \fIstyle\fR
+.
 If a window's pane is larger than the requested dimensions of the
 window, this option may be used to position (or stretch) the window
 within its pane.  \fIStyle\fR  is a string that contains zero or more
@@ -230,6 +253,7 @@ are specified, the window will be stretched to fill the entire height
 (or width) of its cavity.
 .TP
 \fB\-stretch \fIwhen\fR
+.
 Controls how extra space is allocated to each of the panes.
 \fIWhen\fR is one of \fBalways\fR, \fBfirst\fR, \fBlast\fR,
 \fBmiddle\fR, and \fBnever\fR.
@@ -241,24 +265,30 @@ definition:
 .RS
 .TP
 \fBalways\fR
+.
 This pane will always stretch.
 .TP
 \fBfirst\fR
+.
 Only if this pane is the first pane (left-most or top-most) will it
 stretch.
 .TP
 \fBlast\fR
+.
 Only if this pane is the last pane (right-most or bottom-most) will it
 stretch.  This is the default value.
 .TP
 \fBmiddle\fR
+.
 Only if this pane is not the first or last pane will it stretch.
 .TP
 \fBnever\fR
+.
 This pane will never stretch.
 .RE
 .TP
 \fB\-width \fIsize\fR
+.
 Specify a width for the window.  The width will be the outer
 dimension of the window including its border, if any.  If \fIsize\fR
 is an empty string, or if \fB\-width\fR is not specified, then the
@@ -268,6 +298,7 @@ panedwindow.  \fISize\fR may be any value accepted by \fBTk_GetPixels\fR.
 .RE
 .TP
 \fIpathName \fBpanes\fR
+.
 Returns an ordered list of the widgets managed by \fIpathName\fR.
 .SH "RESIZING PANES"
 .PP
diff --git a/doc/radiobutton.n b/doc/radiobutton.n
index 034156f..983b43e 100644
--- a/doc/radiobutton.n
+++ b/doc/radiobutton.n
@@ -38,16 +38,16 @@ If this option is not specified, the button's desired height is computed
 from the size of the image or bitmap or text being displayed in it.
 .OP \-indicatoron indicatorOn IndicatorOn
 Specifies whether or not the indicator should be drawn.  Must be a
-proper boolean value.  If false, the \fBrelief\fR option is
+proper boolean value.  If false, the \fB\-relief\fR option is
 ignored and the widget's relief is always sunken if the widget is
 selected and raised otherwise.
 .OP \-selectcolor selectColor Background
 Specifies a background color to use when the button is selected.
-If \fBindicatorOn\fR is true then the color applies to the indicator.
+If \fB\-indicatoron\fR is true then the color applies to the indicator.
 Under Windows, this color is used as the background for the indicator
 regardless of the select state.
-If \fBindicatorOn\fR is false, this color is used as the background
-for the entire widget, in place of \fBbackground\fR or \fBactiveBackground\fR,
+If \fB\-indicatoron\fR is false, this color is used as the background
+for the entire widget, in place of \fB\-background\fR or \fB\-activeBackground\fR,
 whenever the widget is selected.
 If specified as an empty string then no special color is used for
 displaying when the widget is selected.
@@ -72,25 +72,25 @@ raised\fR.  If the value of this option is the empty string, then no
 alternative relief is used when the mouse cursor is over the radiobutton.
 The empty string is the default value.
 .OP \-selectimage selectImage SelectImage
-Specifies an image to display (in place of the \fBimage\fR option)
+Specifies an image to display (in place of the \fB\-image\fR option)
 when the radiobutton is selected.
-This option is ignored unless the \fBimage\fR option has been
+This option is ignored unless the \fB\-image\fR option has been
 specified.
 .OP \-state state State
 Specifies one of three states for the radiobutton:  \fBnormal\fR, \fBactive\fR,
 or \fBdisabled\fR.  In normal state the radiobutton is displayed using the
-\fBforeground\fR and \fBbackground\fR options.  The active state is
+\fB\-foreground\fR and \fB\-background\fR options.  The active state is
 typically used when the pointer is over the radiobutton.  In active state
-the radiobutton is displayed using the \fBactiveForeground\fR and
-\fBactiveBackground\fR options.  Disabled state means that the radiobutton
+the radiobutton is displayed using the \fB\-activeforeground\fR and
+\fB\-activebackground\fR options.  Disabled state means that the radiobutton
 should be insensitive:  the default bindings will refuse to activate
 the widget and will ignore mouse button presses.
-In this state the \fBdisabledForeground\fR and
-\fBbackground\fR options determine how the radiobutton is displayed.
+In this state the \fB\-disabledforeground\fR and
+\fB\-background\fR options determine how the radiobutton is displayed.
 .OP \-tristateimage tristateImage TristateImage
-Specifies an image to display (in place of the \fBimage\fR option)
+Specifies an image to display (in place of the \fB\-image\fR option)
 when the radiobutton is selected.
-This option is ignored unless the \fBimage\fR option has been
+This option is ignored unless the \fB\-image\fR option has been
 specified.
 .OP \-tristatevalue tristateValue Value
 Specifies the value that causes the radiobutton to display the multi-value
@@ -129,11 +129,11 @@ A radiobutton is a widget that displays a textual string, bitmap or image
 and a diamond or circle called an \fIindicator\fR.
 If text is displayed, it must all be in a single font, but it
 can occupy multiple lines on the screen (if it contains newlines
-or if wrapping occurs because of the \fBwrapLength\fR option) and
+or if wrapping occurs because of the \fB\-wraplength\fR option) and
 one of the characters may optionally be underlined using the
-\fBunderline\fR option.  A radiobutton has
+\fB\-underline\fR option.  A radiobutton has
 all of the behavior of a simple button: it can display itself in either
-of three different ways, according to the \fBstate\fR option;
+of three different ways, according to the \fB\-state\fR option;
 it can be made to appear
 raised, sunken, or flat; it can be made to flash; and it invokes
 a Tcl command whenever mouse button 1 is clicked over the
@@ -156,7 +156,7 @@ When a radiobutton is selected it sets the value of the variable to
 indicate that fact;  each radiobutton also monitors the value of
 the variable and automatically selects and deselects itself when the
 variable's value changes.
-If the variable's value matches the \fBtristateValue\fR, then the radiobutton
+If the variable's value matches the \fB\-tristatevalue\fR, then the radiobutton
 is drawn using the tri-state mode.  This mode is used to indicate mixed or
 multiple values.  (This is used when the radiobutton represents the state
 of multiple items.)
@@ -184,12 +184,14 @@ determine the exact behavior of the command.  The following
 commands are possible for radiobutton widgets:
 .TP
 \fIpathName \fBcget\fR \fIoption\fR
+.
 Returns the current value of the configuration option given
 by \fIoption\fR.
 \fIOption\fR may have any of the values accepted by the \fBradiobutton\fR
 command.
 .TP
 \fIpathName \fBconfigure\fR ?\fIoption\fR? ?\fIvalue option value ...\fR?
+.
 Query or modify the configuration options of the widget.
 If no \fIoption\fR is specified, returns a list describing all of
 the available options for \fIpathName\fR (see \fBTk_ConfigureInfo\fR for
@@ -204,12 +206,14 @@ this case the command returns an empty string.
 command.
 .TP
 \fIpathName \fBdeselect\fR
+.
 Deselects the radiobutton and sets the associated variable to an
 empty string.
 If this radiobutton was not currently selected, the command has
 no effect.
 .TP
 \fIpathName \fBflash\fR
+.
 Flashes the radiobutton.  This is accomplished by redisplaying the radiobutton
 several times, alternating between active and normal colors.  At
 the end of the flash the radiobutton is left in the same normal/active
@@ -217,6 +221,7 @@ state as when the command was invoked.
 This command is ignored if the radiobutton's state is \fBdisabled\fR.
 .TP
 \fIpathName \fBinvoke\fR
+.
 Does just what would have happened if the user invoked the radiobutton
 with the mouse: selects the button and invokes
 its associated Tcl command, if there is one.
@@ -225,6 +230,7 @@ empty string if there is no command associated with the radiobutton.
 This command is ignored if the radiobutton's state is \fBdisabled\fR.
 .TP
 \fIpathName \fBselect\fR
+.
 Selects the radiobutton and sets the associated variable to the
 value corresponding to this widget.
 .SH BINDINGS
diff --git a/doc/scale.n b/doc/scale.n
index e86a87a..c8e722a 100644
--- a/doc/scale.n
+++ b/doc/scale.n
@@ -74,7 +74,7 @@ Specifies one of three states for the scale:  \fBnormal\fR,
 If the scale is disabled then the value may not be changed and the scale
 will not activate.
 If the scale is active, the slider is displayed using the color
-specified by the \fBactiveBackground\fR option.
+specified by the \fB\-activebackground\fR option.
 .OP \-tickinterval tickInterval TickInterval
 Must be a real value.
 Determines the spacing between numerical
@@ -83,7 +83,7 @@ If 0, no tick marks will be displayed.
 .OP \-to to To
 Specifies a real value corresponding
 to the right or bottom end of the scale.
-This value may be either less than or greater than the \fBfrom\fR option.
+This value may be either less than or greater than the \fB\-from\fR option.
 .OP \-variable variable Variable
 Specifies the name of a global variable to link to the scale.  Whenever the
 value of the variable changes, the scale will update to reflect this
@@ -111,16 +111,16 @@ there must not exist a window named \fIpathName\fR, but
 .PP
 A scale is a widget that displays a rectangular \fItrough\fR and a
 small \fIslider\fR.  The trough corresponds to a range
-of real values (determined by the \fBfrom\fR, \fBto\fR, and
-\fBresolution\fR options),
+of real values (determined by the \fB\-from\fR, \fB\-to\fR, and
+\fB\-resolution\fR options),
 and the position of the slider selects a particular real value.
 The slider's position (and hence the scale's value) may be adjusted
 with the mouse or keyboard as described in the \fBBINDINGS\fR
 section below.  Whenever the scale's value is changed, a Tcl
-command is invoked (using the \fBcommand\fR option) to notify
+command is invoked (using the \fB\-command\fR option) to notify
 other interested widgets of the change.
 In addition, the value
-of the scale can be linked to a Tcl variable (using the \fBvariable\fR
+of the scale can be linked to a Tcl variable (using the \fB\-variable\fR
 option), so that changes in either are reflected in the other.
 .PP
 Three annotations may be displayed in a scale widget:  a label
@@ -145,12 +145,14 @@ determine the exact behavior of the command.  The following
 commands are possible for scale widgets:
 .TP
 \fIpathName \fBcget\fR \fIoption\fR
+.
 Returns the current value of the configuration option given
 by \fIoption\fR.
 \fIOption\fR may have any of the values accepted by the \fBscale\fR
 command.
 .TP
 \fIpathName \fBconfigure\fR ?\fIoption\fR? ?\fIvalue option value ...\fR?
+.
 Query or modify the configuration options of the widget.
 If no \fIoption\fR is specified, returns a list describing all of
 the available options for \fIpathName\fR (see \fBTk_ConfigureInfo\fR for
@@ -165,12 +167,14 @@ this case the command returns an empty string.
 command.
 .TP
 \fIpathName \fBcoords \fR?\fIvalue\fR?
+.
 Returns a list whose elements are the x and y coordinates of
 the point along the centerline of the trough that corresponds
 to \fIvalue\fR.
 If \fIvalue\fR is omitted then the scale's current value is used.
 .TP
 \fIpathName \fBget\fR ?\fIx y\fR?
+.
 If \fIx\fR and \fIy\fR are omitted, returns the current value
 of the scale.  If \fIx\fR and \fIy\fR are specified, they give
 pixel coordinates within the widget;  the command returns
@@ -178,7 +182,8 @@ the scale value corresponding to the given pixel.
 Only one of \fIx\fR or \fIy\fR is used:  for horizontal scales
 \fIy\fR is ignored, and for vertical scales \fIx\fR is ignored.
 .TP
-\fIpathName \fBidentify\fR \fIx y\fR
+\fIpathName \fBidentify \fIx y\fR
+.
 Returns a string indicating what part of the scale lies under
 the coordinates given by \fIx\fR and \fIy\fR.
 A return value of \fBslider\fR means that the point is over
@@ -189,7 +194,8 @@ of the slider below or to the right of the slider.
 If the point is not over one of these elements, an empty string
 is returned.
 .TP
-\fIpathName \fBset\fR \fIvalue\fR
+\fIpathName \fBset \fIvalue\fR
+.
 This command is invoked to change the current value of the scale,
 and hence the position at which the slider is displayed.  \fIValue\fR
 gives the new value for the scale.
@@ -202,7 +208,7 @@ Where the behavior is different for vertical and horizontal scales,
 the horizontal behavior is described in parentheses.
 .IP [1]
 If button 1 is pressed in the trough, the scale's value will
-be incremented or decremented by the value of the \fBresolution\fR
+be incremented or decremented by the value of the \fB\-resolution\fR
 option so that the slider moves in the direction of the cursor. 
 If the button is held down, the action auto-repeats.
 .IP [2]
@@ -218,26 +224,28 @@ position.  If the mouse is dragged with button 2 down, the scale's
 value changes with the drag.
 .IP [5]
 The Up and Left keys move the slider up (left) by the value
-of the \fBresolution\fR option.
+of the \fB\-resolution\fR option.
 .IP [6]
 The Down and Right keys move the slider down (right) by the value
-of the \fBresolution\fR option.
+of the \fB\-resolution\fR option.
 .IP [7]
 Control-Up and Control-Left move the slider up (left) by the
-value of the \fBbigIncrement\fR option.
+value of the \fB\-bigincrement\fR option.
 .IP [8]
 Control-Down and Control-Right move the slider down (right) by the
-value of the \fBbigIncrement\fR option.
+value of the \fB\-bigincrement\fR option.
 .IP [9]
 Home moves the slider to the top (left) end of its range.
 .IP [10]
 End moves the slider to the bottom (right) end of its range.
 .PP
-If the scale is disabled using the \fBstate\fR option then
+If the scale is disabled using the \fB\-state\fR option then
 none of the above bindings have any effect.
 .PP
 The behavior of scales can be changed by defining new bindings for
 individual widgets or by redefining the class bindings.
+.SH "SEE ALSO"
+ttk::scale(n)
 .SH KEYWORDS
 scale, slider, trough, widget
 '\" Local Variables:
diff --git a/doc/scrollbar.n b/doc/scrollbar.n
index f961bce..74fb977 100644
--- a/doc/scrollbar.n
+++ b/doc/scrollbar.n
@@ -42,7 +42,7 @@ as described in \fBSCROLLING COMMANDS\fR below.
 Specifies the width of borders drawn around the internal elements
 of the scrollbar (the two arrows and the slider).  The value may
 have any of the forms acceptable to \fBTk_GetPixels\fR.
-If this value is less than zero, the value of the \fBborderWidth\fR
+If this value is less than zero, the value of the \fB\-borderwidth\fR
 option is used in its place.
 .OP \-width width Width
 Specifies the desired narrow dimension of the scrollbar window,
@@ -110,9 +110,10 @@ determine the exact behavior of the command.  The following
 commands are possible for scrollbar widgets:
 .TP
 \fIpathName \fBactivate \fR?\fIelement\fR?
+.
 Marks the element indicated by \fIelement\fR as active, which
-causes it to be displayed as specified by the \fBactiveBackground\fR
-and \fBactiveRelief\fR options.
+causes it to be displayed as specified by the \fB\-activebackground\fR
+and \fB\-activerelief\fR options.
 The only element values understood by this command are \fBarrow1\fR,
 \fBslider\fR, or \fBarrow2\fR.
 If any other value is specified then no element of the scrollbar
@@ -121,13 +122,15 @@ If \fIelement\fR is not specified, the command returns
 the name of the element that is currently active, or an empty string
 if no element is active.
 .TP
-\fIpathName \fBcget\fR \fIoption\fR
+\fIpathName \fBcget \fIoption\fR
+.
 Returns the current value of the configuration option given
 by \fIoption\fR.
 \fIOption\fR may have any of the values accepted by the \fBscrollbar\fR
 command.
 .TP
 \fIpathName \fBconfigure\fR ?\fIoption\fR? ?\fIvalue option value ...\fR?
+.
 Query or modify the configuration options of the widget.
 If no \fIoption\fR is specified, returns a list describing all of
 the available options for \fIpathName\fR (see \fBTk_ConfigureInfo\fR for
@@ -142,6 +145,7 @@ this case the command returns an empty string.
 command.
 .TP
 \fIpathName \fBdelta \fIdeltaX deltaY\fR
+.
 Returns a real number indicating the fractional change in
 the scrollbar setting that corresponds to a given change
 in slider position.  For example, if the scrollbar is horizontal,
@@ -153,6 +157,7 @@ scrollbar setting must change to move the slider \fIdeltaY\fR pixels
 down.  The arguments and the result may be zero or negative.
 .TP
 \fIpathName \fBfraction \fIx y\fR
+.
 Returns a real number between 0 and 1 indicating where the point
 given by \fIx\fR and \fIy\fR lies in the trough area of the scrollbar.
 The value 0 corresponds to the top or left of the trough, the
@@ -164,17 +169,20 @@ If \fIx\fR and \fIy\fR refer to a point outside the trough, the closest
 point in the trough is used.
 .TP
 \fIpathName \fBget\fR
+.
 Returns the scrollbar settings in the form of a list whose
 elements are the arguments to the most recent \fBset\fR widget command.
 .TP
-\fIpathName \fBidentify\fR \fIx y\fR
+\fIpathName \fBidentify \fIx y\fR
+.
 Returns the name of the element under the point given by \fIx\fR and
 \fIy\fR (such as \fBarrow1\fR), or an empty string if the point does
 not lie in any element of the scrollbar.
 \fIX\fR and \fIy\fR must be pixel coordinates relative to the scrollbar
 widget.
 .TP
-\fIpathName \fBset\fR \fIfirst last\fR
+\fIpathName \fBset \fIfirst last\fR
+.
 This command is invoked by the scrollbar's associated widget to
 tell the scrollbar about the current view in the widget.
 The command takes two arguments, each of which is a real fraction
@@ -194,9 +202,11 @@ The scrollbar makes the notification by evaluating a Tcl command
 generated from the scrollbar's \fB\-command\fR option.
 The command may take any of the following forms.
 In each case, \fIprefix\fR is the contents of the
-\fB\-command\fR option, which usually has a form like \fB.t yview\fR
+\fB\-command\fR option, which usually has a form like
+.QW \fB.t yview\fR .
 .TP
 \fIprefix \fBmoveto \fIfraction\fR
+.
 \fIFraction\fR is a real number between 0 and 1.
 The widget should adjust its view so that the point given
 by \fIfraction\fR appears at the beginning of the widget.
@@ -206,6 +216,7 @@ refers to a point one-third of the way through the document,
 and so on.
 .TP
 \fIprefix \fBscroll \fInumber \fBunits\fR
+.
 The widget should adjust its view by \fInumber\fR units.
 The units are defined in whatever way makes sense for the widget,
 such as characters or lines in a text widget.
@@ -214,6 +225,7 @@ the top or left of the window, or \-1, which means that one unit
 should scroll off the bottom or right of the window.
 .TP
 \fIprefix \fBscroll \fInumber \fBpages\fR
+.
 The widget should adjust its view by \fInumber\fR pages.
 It is up to the widget to define the meaning of a page;  typically
 it is slightly less than what fits in the window, so that there
@@ -230,7 +242,7 @@ is deprecated.
 In the old command syntax, the \fBset\fR widget command has the
 following form:
 .TP
-\fIpathName \fBset\fR \fItotalUnits windowUnits firstUnit lastUnit\fR
+\fIpathName \fBset \fItotalUnits windowUnits firstUnit lastUnit\fR
 In this form the arguments are all integers.
 \fITotalUnits\fR gives the total size of the object being displayed in the
 associated widget.  The meaning of one unit depends on the associated
diff --git a/doc/send.n b/doc/send.n
index 6b6d46b..3af170f 100644
--- a/doc/send.n
+++ b/doc/send.n
@@ -58,7 +58,7 @@ You can query and change the name of an application with the
 .SH "DISABLING SENDS"
 .PP
 If the \fBsend\fR command is removed from an application (e.g.
-with the command \fBrename send {}\fR) then the application
+with the command \fBrename\fR \fBsend {}\fR) then the application
 will not respond to incoming send requests anymore,  nor will it
 be able to issue outgoing requests.
 Communication can be reenabled by invoking the \fBtk appname\fR
diff --git a/doc/spinbox.n b/doc/spinbox.n
index cc00d58..e88aea6 100644
--- a/doc/spinbox.n
+++ b/doc/spinbox.n
@@ -57,9 +57,9 @@ are specified correctly, the spinbox will use these values to control its
 contents.  This value must be less than the \fB\-to\fR option.
 If \fB\-values\fR is specified, it supercedes this option.
 .OP "\-invalidcommand or \-invcmd" invalidCommand InvalidCommand
-Specifies a script to eval when \fBvalidateCommand\fR returns 0.  Setting
+Specifies a script to eval when \fB\-validatecommand\fR returns 0.  Setting
 it to an empty string disables this feature (the default).  The best use of
-this option is to set it to \fIbell\fR.  See \fBValidation\fR below for
+this option is to set it to \fIbell\fR.  See \fBVALIDATION\fR below for
 more information.
 .OP \-increment increment Increment
 A floating-point value specifying the increment.  When used with
@@ -89,16 +89,16 @@ If \fB\-values\fR is specified, it supercedes this option.
 Specifies the mode in which validation should operate: \fBnone\fR,
 \fBfocus\fR, \fBfocusin\fR, \fBfocusout\fR, \fBkey\fR, or \fBall\fR.
 It defaults to \fBnone\fR.  When you want validation, you must explicitly
-state which mode you wish to use.  See \fBValidation\fR below for more.
+state which mode you wish to use.  See \fBVALIDATION\fR below for more.
 .OP "\-validatecommand or \-vcmd" validateCommand ValidateCommand
 Specifies a script to evaluate when you want to validate the input in the
 widget.  Setting it to an empty string disables this feature (the default).
 Validation occurs according to the value of \fB\-validate\fR.
 This command must return a valid Tcl boolean value.  If it returns 0 (or
 the valid Tcl boolean equivalent) then the value of the widget will not
-change and the \fBinvalidCommand\fR will be evaluated if it is set.  If it
+change and the \fB\-invalidcommand\fR will be evaluated if it is set.  If it
 returns 1, then value will be changed.
-See \fBValidation\fR below for more information.
+See \fBVALIDATION\fR below for more information.
 .OP \-values values Values
 Must be a proper list value.  If specified, the spinbox will use these
 values as to control its contents, starting with the first value.  This
@@ -129,7 +129,7 @@ to move, or spin, through a fixed set of ascending or descending values
 such as times or dates in addition to editing the value as in an
 \fBentry\fR.  When first created, a spinbox's string is empty.
 A portion of the spinbox may be selected as described below.
-If a spinbox is exporting its selection (see the \fBexportSelection\fR
+If a spinbox is exporting its selection (see the \fB\-exportselection\fR
 option), then it will observe the standard protocols for handling the
 selection;  spinbox selections are available as type \fBSTRING\fR.
 Spinboxes also observe the standard Tk rules for dealing with the
@@ -141,31 +141,31 @@ Spinboxes are capable of displaying strings that are too long to
 fit entirely within the widget's window.  In this case, only a
 portion of the string will be displayed; commands described below
 may be used to change the view in the window.  Spinboxes use
-the standard \fBxScrollCommand\fR mechanism for interacting with
-scrollbars (see the description of the \fBxScrollCommand\fR option
+the standard \fB\-xscrollcommand\fR mechanism for interacting with
+scrollbars (see the description of the \fB\-xscrollcommand\fR option
 for details).  They also support scanning, as described below.
 .SH VALIDATION
 .PP
-Validation works by setting the \fBvalidateCommand\fR
-option to a script which will be evaluated according to the \fBvalidate\fR
+Validation works by setting the \fB\-validatecommand\fR
+option to a script which will be evaluated according to the \fB\-validate\fR
 option as follows:
 .PP
 .IP \fBnone\fR 10
 Default.  This means no validation will occur.
 .IP \fBfocus\fR 10
-\fBvalidateCommand\fR will be called when the spinbox receives or
+The \fB\-validatecommand\fR will be called when the spinbox receives or
 loses focus.
 .IP \fBfocusin\fR 10
-\fBvalidateCommand\fR will be called when the spinbox receives focus.
+The \fB\-validatecommand\fR will be called when the spinbox receives focus.
 .IP \fBfocusout\fR 10
-\fBvalidateCommand\fR will be called when the spinbox loses focus.
+The \fB\-validatecommand\fR will be called when the spinbox loses focus.
 .IP \fBkey\fR 10
-\fBvalidateCommand\fR will be called when the spinbox is edited.
+The \fB\-validatecommand\fR will be called when the spinbox is edited.
 .IP \fBall\fR 10
-\fBvalidateCommand\fR will be called for all above conditions.
+The \fB\-validatecommand\fR will be called for all above conditions.
 .PP
-It is possible to perform percent substitutions on the \fBvalidateCommand\fR
-and \fBinvalidCommand\fR, just as you would in a \fBbind\fR script.  The
+It is possible to perform percent substitutions on the \fB\-validatecommand\fR
+and \fB\-invalidcommand\fR scripts, just as you would in a \fBbind\fR script.  The
 following substitutions are recognized:
 .PP
 .IP \fB%d\fR 5
@@ -190,32 +190,32 @@ The type of validation that triggered the callback
 .IP \fB%W\fR 5
 The name of the spinbox widget.
 .PP
-In general, the \fBtextVariable\fR and \fBvalidateCommand\fR can be
+In general, the \fB\-textvariable\fR and \fB\-validatecommand\fR can be
 dangerous to mix.  Any problems have been overcome so that using the
-\fBvalidateCommand\fR will not interfere with the traditional behavior of
-the spinbox widget.  Using the \fBtextVariable\fR for read-only purposes will
+\fB\-validatecommand\fR will not interfere with the traditional behavior of
+the spinbox widget.  Using the \fB\-textvariable\fR for read-only purposes will
 never cause problems.  The danger comes when you try set the
-\fBtextVariable\fR to something that the \fBvalidateCommand\fR would not
-accept, which causes \fBvalidate\fR to become \fInone\fR (the
-\fBinvalidCommand\fR will not be triggered).  The same happens
-when an error occurs evaluating the \fBvalidateCommand\fR.
+\fB\-textvariable\fR to something that the \fB\-validatecommand\fR would not
+accept, which causes \fB\-validate\fR to become \fInone\fR (the
+\fB\-invalidcommand\fR will not be triggered).  The same happens
+when an error occurs evaluating the \fB\-validatecommand\fR.
 .PP
-Primarily, an error will occur when the \fBvalidateCommand\fR or
-\fBinvalidCommand\fR encounters an error in its script while evaluating or
-\fBvalidateCommand\fR does not return a valid Tcl boolean value.  The
-\fBvalidate\fR option will also set itself to \fBnone\fR when you edit the
-spinbox widget from within either the \fBvalidateCommand\fR or the
-\fBinvalidCommand\fR.  Such editions will override the one that was being
+Primarily, an error will occur when the \fB\-validatecommand\fR or
+\fB\-invalidcommand\fR encounters an error in its script while evaluating or
+\fB\-validatecommand\fR does not return a valid Tcl boolean value.  The
+\fB\-validate\fR option will also set itself to \fBnone\fR when you edit the
+spinbox widget from within either the \fB\-validatecommand\fR or the
+\fB\-invalidcommand\fR.  Such editions will override the one that was being
 validated.  If you wish to edit the value of the widget
-during validation and still have the \fBvalidate\fR option set, you should
+during validation and still have the \fB\-validate\fR option set, you should
 include the command
 .CS
      \fI%W config \-validate %v\fR
 .CE
-in the \fBvalidateCommand\fR or \fBinvalidCommand\fR (whichever one you
+in the \fB\-validatecommand\fR or \fB\-invalidcommand\fR (whichever one you
 were editing the spinbox widget from).  It is also recommended to not set an
-associated \fBtextVariable\fR during validation, as that can cause the
-spinbox widget to become out of sync with the \fBtextVariable\fR.
+associated \fB\-textvariable\fR during validation, as that can cause the
+spinbox widget to become out of sync with the \fB\-textvariable\fR.
 .SH "WIDGET COMMAND"
 .PP
 The \fBspinbox\fR command creates a new Tcl command whose
@@ -392,7 +392,7 @@ Returns an empty string.
 Returns 1 if there is are characters selected in the spinbox,
 0 if nothing is selected.
 .TP
-\fIpathName \fBselection range \fIstart\fR \fIend\fR
+\fIpathName \fBselection range \fIstart end\fR
 Sets the selection to include the characters starting with
 the one indexed by \fIstart\fR and ending with the one just
 before \fIend\fR.
@@ -420,9 +420,9 @@ value, otherwise it just returns the spinbox's string.
 If validation is on, it will occur when setting the string.
 .TP
 \fIpathName \fBvalidate\fR
-This command is used to force an evaluation of the \fBvalidateCommand\fR
-independent of the conditions specified by the \fBvalidate\fR option.
-This is done by temporarily setting the \fBvalidate\fR option to \fBall\fR.
+This command is used to force an evaluation of the \fB\-validatecommand\fR
+independent of the conditions specified by the \fB\-validate\fR option.
+This is done by temporarily setting the \fB\-validate\fR option to \fBall\fR.
 It returns 0 or 1.
 .TP
 \fIpathName \fBxview \fIargs\fR
@@ -441,7 +441,7 @@ in the window, and 40% of the text is off-screen to the right.
 These are the same values passed to scrollbars via the \fB\-xscrollcommand\fR
 option.
 .TP
-\fIpathName \fBxview\fR \fIindex\fR
+\fIpathName \fBxview \fIindex\fR
 Adjusts the view in the window so that the character given by \fIindex\fR
 is displayed at the left edge of the window.
 .TP
@@ -579,6 +579,8 @@ take place.
 .PP
 The behavior of spinboxes can be changed by defining new bindings for
 individual widgets or by redefining the class bindings.
+.SH "SEE ALSO"
+ttk::spinbox(n)
 .SH KEYWORDS
 spinbox, entry, widget
 '\" Local Variables:
diff --git a/doc/text.n b/doc/text.n
index 569b13f..8aa53ba 100644
--- a/doc/text.n
+++ b/doc/text.n
@@ -112,7 +112,7 @@ If the list of tab stops does not have enough elements to cover all of the
 tabs in a text line, then Tk extrapolates new tab stops using the spacing and
 alignment from the last tab stop in the list. Tab distances must be strictly
 positive, and must always increase from one tab stop to the next (if not, an
-error is thrown). The value of the \fBtabs\fR option may be overridden by
+error is thrown). The value of the \fB\-tabs\fR option may be overridden by
 \fB\-tabs\fR options in tags.
 .PP
 If no \fB\-tabs\fR option is specified, or if it is specified as an empty
@@ -132,7 +132,7 @@ of the \fIn\fR'th tab stop, then a gap of a single space will be inserted as a
 fallback. If the tab style is \fBwordprocessor\fR then any tab character being
 laid out will use (and be defined by) the first tab stop to the right of the
 preceding characters already laid out on that line. The value of the
-\fBtabstyle\fR option may be overridden by \fB\-tabstyle\fR options in tags.
+\fB\-tabstyle\fR option may be overridden by \fB\-tabstyle\fR options in tags.
 .OP \-undo undo Undo
 Specifies a boolean that says whether the undo mechanism is active or not.
 .OP \-width width Width
@@ -269,7 +269,7 @@ text. Spaces on either side of \fIcount\fR are optional. If the \fBdisplay\fR
 submodifier is given, elided characters are skipped over without being
 counted. If \fBany\fR is given, then all characters are counted. For
 historical reasons, if neither modifier is given then the count actually takes
-place in units of index positions (see \fBindices\fR for details). This
+place in units of index positions (see \fBINDICES\fR for details). This
 behaviour may be changed in a future major release, so if you need an index
 count, you are encouraged to use \fBindices\fR instead wherever possible.
 .TP
@@ -282,7 +282,7 @@ the text (1.0). Spaces on either side of \fIcount\fR are optional. If the
 \fBdisplay\fR submodifier is given, elided characters are skipped over without
 being counted. If \fBany\fR is given, then all characters are counted. For
 historical reasons, if neither modifier is given then the count actually takes
-place in units of index positions (see \fBindices\fR for details). This
+place in units of index positions (see \fBINDICES\fR for details). This
 behavior may be changed in a future major release, so if you need an index
 count, you are encouraged to use \fBindices\fR instead wherever possible.
 .TP
@@ -765,7 +765,7 @@ the bottom of the embedded image. It may have any of the usual forms defined
 for a screen distance.
 .SH "THE SELECTION"
 .PP
-Selection support is implemented via tags. If the \fBexportSelection\fR option
+Selection support is implemented via tags. If the \fB\-exportselection\fR option
 for the text widget is true then the \fBsel\fR tag will be associated with the
 selection:
 .IP [1]
@@ -785,8 +785,8 @@ is generated.
 The \fBsel\fR tag is automatically defined when a text widget is created, and
 it may not be deleted with the
 .QW "\fIpathName \fBtag delete\fR"
-widget command. Furthermore, the \fBselectBackground\fR,
-\fBselectBorderWidth\fR, and \fBselectForeground\fR options for the text
+widget command. Furthermore, the \fB\-selectbackground\fR,
+\fB\-selectborderwidth\fR, and \fB\-selectforeground\fR options for the text
 widget are tied to the \fB\-background\fR, \fB\-borderwidth\fR, and
 \fB\-foreground\fR options for the \fBsel\fR tag: changes in either will
 automatically be reflected in the other. Also the
@@ -866,8 +866,8 @@ arbitrary other widgets, cannot be shared between peers. This means the
 (it is advisable to use the \fB\-create\fR script capabilities to allow each
 peer to create its own embedded windows as needed). Fourth, all of the
 configuration options of each peer (e.g. \fB\-font\fR, etc) can be set
-independently, with the exception of \fB\-undo\fR, \fB\-maxUndo\fR,
-\fB\-autoSeparators\fR (i.e. all undo, redo and modified state issues are
+independently, with the exception of \fB\-undo\fR, \fB\-maxundo\fR,
+\fB\-autoseparators\fR (i.e. all undo, redo and modified state issues are
 shared).
 .PP
 Finally any single peer need not contain all lines from the underlying data
@@ -961,7 +961,7 @@ each counting option given. Valid counting options are \fB\-chars\fR,
 default value, if no option is specified, is \fB\-indices\fR. There is an
 additional possible option \fB\-update\fR which is a modifier. If given, then
 all subsequent options ensure that any possible out of date information is
-recalculated. This currently only has any effect for the \fI\-ypixels\fR count
+recalculated. This currently only has any effect for the \fB\-ypixels\fR count
 (which, if \fB\-update\fR is not given, will use the text widget's current
 cached value for each line). The count options are interpreted as follows:
 .RS
@@ -1132,7 +1132,7 @@ behavior of the command depends on the \fIoption\fR argument that follows the
 supported:
 .RS
 .TP
-\fIpathName \fBedit modified ?\fIboolean\fR?
+\fIpathName \fBedit modified \fR?\fIboolean\fR?
 .
 If \fIboolean\fR is not specified, returns the modified flag of the widget.
 The insert, delete, edit undo and edit redo commands or the user can set or
@@ -1162,7 +1162,7 @@ the undo stack in between two separators. Generates an error when the undo
 stack is empty. Does nothing when the \fB\-undo\fR option is false.
 .RE
 .TP
-\fIpathName \fBget\fR \fI?\-displaychars?\fR \fI\-\- index1\fR ?\fIindex2 ...\fR?
+\fIpathName \fBget\fR ?\fB\-displaychars\fR? ?\fB\-\-\fR? \fIindex1\fR ?\fIindex2 ...\fR?
 .
 Return a range of characters from the text. The return value will be all the
 characters in the text starting with the one whose index is \fIindex1\fR and
@@ -1187,7 +1187,7 @@ command depends on the \fIoption\fR argument that follows the \fBtag\fR
 argument. The following forms of the command are currently supported:
 .RS
 .TP
-\fIpathName \fBimage cget\fR \fIindex option\fR
+\fIpathName \fBimage cget \fIindex option\fR
 .
 Returns the value of a configuration option for an embedded image. \fIIndex\fR
 identifies the embedded image, and \fIoption\fR specifies a particular
@@ -1307,7 +1307,7 @@ calls to
 This command returns an empty string.
 .RE
 .TP
-\fIpathName \fBpeer\fR \fIoption args\fR
+\fIpathName \fBpeer \fIoption args\fR
 .
 This command is used to create and query widget peers. It has two forms,
 depending on \fIoption\fR:
@@ -1326,7 +1326,7 @@ Returns a list of peers of this widget (this does not include the widget
 itself). The order within this list is undefined.
 .RE
 .TP
-\fIpathName \fBreplace\fR \fIindex1 index2 chars\fR ?\fItagList chars tagList ...\fR?
+\fIpathName \fBreplace \fIindex1 index2 chars\fR ?\fItagList chars tagList ...\fR?
 .
 Replaces the range of characters between \fIindex1\fR and \fIindex2\fR with
 the given characters and tags. See the section on \fIpathName \fBinsert\fR for
@@ -1342,7 +1342,7 @@ stack are correctly modified, if undo operations are active in the text
 widget. The command returns an empty string.
 .RE
 .TP
-\fIpathName \fBscan\fR \fIoption args\fR
+\fIpathName \fBscan \fIoption args\fR
 .
 This command is used to implement scanning on texts. It has two forms,
 depending on \fIoption\fR:
@@ -1397,7 +1397,8 @@ those in \fIpattern\fR. This is the default.
 \fB\-regexp\fR
 .
 Treat \fIpattern\fR as a regular expression and match it against the text
-using the rules for regular expressions (see the \fBregexp\fR command for
+using the rules for regular expressions (see the \fBregexp\fR command
+and the \fBre_syntax\fR page for
 details). The default matching automatically passes both the
 \fB\-lineanchor\fR and \fB\-linestop\fR options to the regexp engine (unless
 \fB\-nolinestop\fR is used), so that \fI^$\fR match beginning and end of line,
@@ -1571,7 +1572,7 @@ bindings will be invoked first, followed by bindings for the window as a
 whole.
 .RE
 .TP
-\fIpathName \fBtag cget\fR \fItagName option\fR
+\fIpathName \fBtag cget \fItagName option\fR
 .
 This command returns the current value of the option named \fIoption\fR
 associated with the tag given by \fItagName\fR. \fIOption\fR may have any of
@@ -1674,11 +1675,11 @@ has no effect. This command returns an empty string.
 \fIpathName \fBwindow \fIoption \fR?\fIarg arg ...\fR?
 .
 This command is used to manipulate embedded windows. The behavior of the
-command depends on the \fIoption\fR argument that follows the \fBtag\fR
+command depends on the \fIoption\fR argument that follows the \fBwindow\fR
 argument. The following forms of the command are currently supported:
 .RS
 .TP
-\fIpathName \fBwindow cget\fR \fIindex option\fR
+\fIpathName \fBwindow cget \fIindex option\fR
 .
 Returns the value of a configuration option for an embedded window.
 \fIIndex\fR identifies the embedded window, and \fIoption\fR specifies a
@@ -1756,7 +1757,7 @@ negative then characters farther to the left become visible; if it is positive
 then characters farther to the right become visible.
 .RE
 .TP
-\fIpathName \fByview \fI?args\fR?
+\fIpathName \fByview \fR?\fIargs\fR?
 .
 This command is used to query and change the vertical position of the text in
 the widget's window. It can take any of the following forms:
@@ -1821,7 +1822,7 @@ If \fIindex\fR is only a few lines off-screen below the window then it will be
 positioned at the bottom of the window.
 .IP [4]
 Otherwise, \fIindex\fR will be centered in the window.
-.LP
+.PP
 The \fB\-pickplace\fR option has been obsoleted by the \fIpathName \fBsee\fR
 widget command (\fIpathName \fBsee\fR handles both x- and y-motion to make a
 location visible, whereas the \fB\-pickplace\fR mode only handles motion in
@@ -2037,7 +2038,7 @@ tags within them.
 .PP
 The display line with the insert cursor is redrawn each time the cursor
 blinks, which causes a steady stream of graphics traffic. Set the
-\fBinsertOffTime\fR attribute to 0 avoid this.
+\fB\-insertofftime\fR attribute to 0 avoid this.
 .SS "KNOWN BUGS"
 .PP
 The \fIpathName \fBsearch \-regexp\fR sub-command attempts to perform
@@ -2056,7 +2057,7 @@ Tcl's regexp system returns the incorrect code and adding a second extra line
 would actually match, the text widget will return the wrong result. In
 practice this is a rare problem, but it can occur, for example:
 .CS
-pack [text .t]
+pack [\fBtext\fR .t]
 \.t insert 1.0 "aaaa\enbbbb\encccc\enbbbb\enaaaa\en"
 \.t search \-regexp \-\- {(a+|b+\enc+\enb+)+\ena+} 1.0
 .CE
@@ -2072,7 +2073,7 @@ actually encompasses all of them. The search algorithm used by the widget does
 not look back arbitrarily far for a possible match which might cover large
 portions of the widget. For example:
 .CS
-pack [text .t]
+pack [\fBtext\fR .t]
 \.t insert 1.0 "aaaa\enbbbb\enbbbb\enbbbb\enbbbb\\n"
 \.t search \-regexp \-backward \-\- {b+\en|a+\en(b+\en)+} end
 .CE
diff --git a/doc/tk.n b/doc/tk.n
index 7390261..815af84 100644
--- a/doc/tk.n
+++ b/doc/tk.n
@@ -60,8 +60,8 @@ used for indicating global focus (e.g. to comply with Microsoft
 Accessibility guidelines), as well as for location of the over-the-spot
 XIM (X Input Methods) or Windows IME windows.  If no options are specified,
 the last values used for setting the caret are return in option-value pair
-format.  \fI\-x\fR and \fI\-y\fR represent window-relative coordinates, and
-\fI\-height\fR is the height of the current cursor location, or the height
+format.  \fB\-x\fR and \fB\-y\fR represent window-relative coordinates, and
+\fB\-height\fR is the height of the current cursor location, or the height
 of the specified \fIwindow\fR if none is given.
 .TP
 \fBtk inactive \fR?\fB\-displayof \fIwindow\fR? ?\fBreset\fR?
diff --git a/doc/tkwait.n b/doc/tkwait.n
index 9828ad0..83586f6 100644
--- a/doc/tkwait.n
+++ b/doc/tkwait.n
@@ -43,6 +43,8 @@ the normal fashion, so the application will continue to respond
 to user interactions.
 If an event handler invokes \fBtkwait\fR again, the nested call
 to \fBtkwait\fR must complete before the outer call can complete.
+.SH "SEE ALSO"
+bind(n), vwait(n)
 .SH KEYWORDS
 variable, visibility, wait, window
 '\" Local Variables:
diff --git a/doc/toplevel.n b/doc/toplevel.n
index 6fbc878..7d5b53c 100644
--- a/doc/toplevel.n
+++ b/doc/toplevel.n
@@ -20,7 +20,7 @@ toplevel \- Create and manipulate toplevel widgets
 .SE
 .SH "WIDGET-SPECIFIC OPTIONS"
 .OP \-background background Background
-This option is the same as the standard \fBbackground\fR option
+This option is the same as the standard \fB\-background\fR option
 except that its value may also be specified as an empty string.
 In this case, the widget will display no background or border, and
 no colors will be consumed from its colormap for its background
@@ -30,7 +30,7 @@ Specifies a class for the window.
 This class will be used when querying the option database for
 the window's other options, and it will also be used later for
 other purposes such as bindings.
-The \fBclass\fR option may not be changed with the \fBconfigure\fR
+The \fB\-class\fR option may not be changed with the \fBconfigure\fR
 widget command.
 .OP \-colormap colormap Colormap
 Specifies a colormap to use for the window.
@@ -39,7 +39,7 @@ created for the window and its children, or the name of another
 window (which must be on the same screen and have the same visual
 as \fIpathName\fR), in which case the new window will use the colormap
 from the specified window.
-If the \fBcolormap\fR option is not specified, the new window
+If the \fB\-colormap\fR option is not specified, the new window
 uses the default colormap of its screen.
 This option may not be changed with the \fBconfigure\fR
 widget command.
@@ -86,7 +86,7 @@ Specifies visual information for the new window in any of the
 forms accepted by \fBTk_GetVisual\fR.
 If this option is not specified, the new window will use the default
 visual for its screen.
-The \fBvisual\fR option may not be modified with the \fBconfigure\fR
+The \fB\-visual\fR option may not be modified with the \fBconfigure\fR
 widget command.
 .OP \-width width Width
 Specifies the desired width for the window in any of the forms
@@ -125,7 +125,7 @@ the toplevel widget's path name.  \fIOption\fR and the \fIarg\fRs
 determine the exact behavior of the command.  The following
 commands are possible for toplevel widgets:
 .TP
-\fIpathName \fBcget\fR \fIoption\fR
+\fIpathName \fBcget \fIoption\fR
 Returns the current value of the configuration option given
 by \fIoption\fR.
 \fIOption\fR may have any of the values accepted by the \fBtoplevel\fR
diff --git a/doc/ttk_entry.n b/doc/ttk_entry.n
index b42bd31..42335d8 100644
--- a/doc/ttk_entry.n
+++ b/doc/ttk_entry.n
@@ -39,7 +39,7 @@ requests when it has a selection.
 .\" MAYBE: .OP \-insertbackground insertBackground Foreground
 .\" MAYBE: .OP \-insertwidth insertWidth InsertWidth
 .OP \-invalidcommand invalidCommand InvalidCommand
-A script template to evaluate whenever the \fBvalidateCommand\fR returns 0.
+A script template to evaluate whenever the \fB\-validatecommand\fR returns 0.
 See \fBVALIDATION\fR below for more information.
 .OP \-justify justify Justify
 Specifies how the text is aligned within the entry widget.
@@ -87,7 +87,7 @@ in average-size characters of the widget's font.
 .SH NOTES
 .PP
 A portion of the entry may be selected as described below.
-If an entry is exporting its selection (see the \fBexportSelection\fR
+If an entry is exporting its selection (see the \fB\-exportselection\fR
 option), then it will observe the standard X11 protocols for handling the
 selection;  entry selections are available as type \fBSTRING\fR.
 Entries also observe the standard Tk rules for dealing with the
@@ -99,8 +99,8 @@ Entries are capable of displaying strings that are too long to
 fit entirely within the widget's window.  In this case, only a
 portion of the string will be displayed;  commands described below
 may be used to change the view in the window.  Entries use
-the standard \fBxScrollCommand\fR mechanism for interacting with
-scrollbars (see the description of the \fBxScrollCommand\fR option
+the standard \fB\-xscrollcommand\fR mechanism for interacting with
+scrollbars (see the description of the \fB\-xscrollcommand\fR option
 for details).
 .SH "INDICES"
 .PP
diff --git a/doc/ttk_notebook.n b/doc/ttk_notebook.n
index d6c33d3..456b796 100644
--- a/doc/ttk_notebook.n
+++ b/doc/ttk_notebook.n
@@ -100,7 +100,7 @@ which returns the number of tabs
 .QW "\fIpathname \fBindex\fR" ).
 .SH "WIDGET COMMAND"
 .TP
-\fIpathname \fBadd\fR \fIwindow\fR ?\fIoptions...\fR?
+\fIpathname \fBadd \fIwindow\fR ?\fIoptions...\fR?
 Adds a new tab to the notebook.
 See \fBTAB OPTIONS\fR for the list of available \fIoptions\fR.
 If \fIwindow\fR is currently managed by the notebook but hidden,
@@ -109,38 +109,38 @@ it is restored to its previous position.
 \fIpathname \fBconfigure\fR ?\fIoptions\fR?
 See \fIttk::widget(n)\fR.
 .TP
-\fIpathname \fBcget\fR \fIoption\fR
+\fIpathname \fBcget \fIoption\fR
 See \fIttk::widget(n)\fR.
 .TP
-\fIpathname \fBforget\fR \fItabid\fR
+\fIpathname \fBforget \fItabid\fR
 Removes the tab specified by \fItabid\fR,
 unmaps and unmanages the associated window.
 .TP
-\fIpathname \fBhide\fR \fItabid\fR
+\fIpathname \fBhide \fItabid\fR
 Hides the tab specified by \fItabid\fR.
 The tab will not be displayed, but the associated window
 remains managed by the notebook and its configuration remembered.
 Hidden tabs may be restored with the \fBadd\fR command.
 .TP
-\fIpathname \fBidentify\fR \fIcomponent\fR \fIx\fR \fIy\fR
+\fIpathname \fBidentify\fI component x y\fR
 Returns the name of the element under the point given by \fIx\fR and \fIy\fR,
 or the empty string if no component is present at that location.
 The following subcommands are supported:
 .RS
 .TP
-\fIpathname \fBidentify\fR \fBelement\fR \fIx\fR \fIy\fR
+\fIpathname \fBidentify element\fR \fIx y\fR
 Returns the name of the element at the specified location.
 .TP
-\fIpathname \fBidentify\fR \fBtab\fR \fIx\fR \fIy\fR
+\fIpathname \fBidentify tab\fR \fIx y\fR
 Returns the index of the tab at the specified location.
 .RE
 .TP
-\fIpathname \fBindex\fR \fItabid\fR
+\fIpathname \fBindex \fItabid\fR
 Returns the numeric index of the tab specified by \fItabid\fR,
 or the total number of tabs if \fItabid\fR is the string
 .QW \fBend\fR .
 .TP
-\fIpathname \fBinsert\fR \fIpos\fR \fIsubwindow\fR \fIoptions...\fR
+\fIpathname \fBinsert \fIpos subwindow options...\fR
 Inserts a pane at the specified position.
 \fIpos\fR is either the string \fBend\fR, an integer index, 
 or the name of a managed subwindow.
@@ -148,7 +148,7 @@ If \fIsubwindow\fR is already managed by the notebook,
 moves it to the specified position.
 See \fBTAB OPTIONS\fR for the list of available options.
 .TP
-\fIpathname \fBinstate\fR \fIstatespec \fR?\fIscript...\fR?
+\fIpathname \fBinstate \fIstatespec \fR?\fIscript...\fR?
 See \fIttk::widget(n)\fR.
 .TP
 \fIpathname \fBselect\fR ?\fItabid\fR?
@@ -161,7 +161,7 @@ currently selected pane.
 \fIpathname \fBstate\fR ?\fIstatespec\fR?
 See \fIttk::widget(n)\fR.
 .TP
-\fIpathname \fBtab\fR \fItabid\fR ?\fI\-option \fR?\fIvalue ...\fR
+\fIpathname \fBtab \fItabid\fR ?\fI\-option \fR?\fIvalue ...\fR
 Query or modify the options of the specific tab.
 If no \fI\-option\fR is specified,
 returns a dictionary of the tab option values.
@@ -186,7 +186,7 @@ containing the notebook as follows:
 .IP \(bu
 \fBShift-Control-Tab\fR selects the tab preceding the currently selected one.
 .IP \(bu
-\fBAlt-K\fR, where \fBK\fR is the mnemonic (underlined) character
+\fBAlt-\fIK\fR, where \fIK\fR is the mnemonic (underlined) character
 of any tab, will select that tab.
 .PP
 Multiple notebooks in a single toplevel may be enabled for traversal,
diff --git a/doc/ttk_panedwindow.n b/doc/ttk_panedwindow.n
index d9d771f..3b80ac8 100644
--- a/doc/ttk_panedwindow.n
+++ b/doc/ttk_panedwindow.n
@@ -52,29 +52,29 @@ Supports the standard \fBconfigure\fR, \fBcget\fR, \fBstate\fR,
 and \fBinstate\fR commands; see \fIttk::widget(n)\fR for details.
 Additional commands:
 .TP
-\fIpathname\fR \fBadd\fR \fIsubwindow\fR \fIoptions...\fR
+\fIpathname \fBadd \fIsubwindow options...\fR
 Adds a new pane to the window.
 See \fBPANE OPTIONS\fR for the list of available options.
 .TP
-\fIpathname\fR \fBforget\fR \fIpane\fR
+\fIpathname \fBforget \fIpane\fR
 Removes the specified subpane from the widget.
 \fIpane\fR is either an integer index or the name of a managed subwindow.
 .TP
-\fIpathname\fR \fBidentify\fR \fIcomponent\fR \fIx\fR \fIy\fR
+\fIpathname \fBidentify \fIcomponent x y\fR
 Returns the name of the element under the point given by \fIx\fR and \fIy\fR,
 or the empty string if no component is present at that location.
 If \fIcomponent\fR is omitted, it defaults to \fBsash\fR.
 The following subcommands are supported:
 .RS
 .TP
-\fIpathname\fR \fBidentify\fR \fBelement\fR \fIx\fR \fIy\fR
+\fIpathname \fBidentify element \fIx y\fR
 Returns the name of the element at the specified location.
 .TP
-\fIpathname\fR \fBidentify\fR \fBsash\fR \fIx\fR \fIy\fR
+\fIpathname \fBidentify sash \fIx y\fR
 Returns the index of the sash at the specified location.
 .RE
 .TP
-\fIpathname\fR \fBinsert\fR \fIpos\fR \fIsubwindow\fR \fIoptions...\fR
+\fIpathname \fBinsert \fIpos subwindow options...\fR
 Inserts a pane at the specified position.
 \fIpos\fR is either the string \fBend\fR, an integer index,
 or the name of a managed subwindow.
@@ -82,7 +82,7 @@ If \fIsubwindow\fR is already managed by the paned window,
 moves it to the specified position.
 See \fBPANE OPTIONS\fR for the list of available options.
 .TP
-\fIpathname\fR \fBpane\fR \fIpane \-option \fR?\fIvalue \fR?\fI\-option value...\fR
+\fIpathname \fBpane \fIpane \-option \fR?\fIvalue \fR?\fI\-option value...\fR
 Query or modify the options of the specified \fIpane\fR,
 where \fIpane\fR is either an integer index or the name of a managed subwindow.
 If no \fI\-option\fR is specified, returns a dictionary of the pane
@@ -90,10 +90,10 @@ option values.
 If one \fI\-option\fR is specified, returns the value of that \fIoption\fR.
 Otherwise, sets the \fI\-option\fRs to the corresponding \fIvalue\fRs.
 .TP
-\fIpathname\fR \fBpanes\fR
+\fIpathname \fBpanes\fR
 Returns the list of all windows managed by the widget.
 .TP
-\fIpathname\fR \fBsashpos\fR \fIindex\fR ?\fInewpos\fR?
+\fIpathname \fBsashpos \fIindex\fR ?\fInewpos\fR?
 If \fInewpos\fR is specified, sets the position
 of sash number \fIindex\fR.
 May adjust the positions of adjacent sashes
diff --git a/doc/ttk_progressbar.n b/doc/ttk_progressbar.n
index 9381c61..b29f88d 100644
--- a/doc/ttk_progressbar.n
+++ b/doc/ttk_progressbar.n
@@ -57,13 +57,13 @@ to provide additional animation effects.
 .SH "WIDGET COMMAND"
 .PP
 .TP
-\fIpathName \fBcget\fR \fIoption\fR
+\fIpathName \fBcget \fIoption\fR
 Returns the current value of the specified \fIoption\fR; see \fIttk::widget(n)\fR.
 .TP
 \fIpathName \fBconfigure\fR ?\fIoption\fR? ?\fIvalue option value ...\fR?
 Modify or query widget options; see \fIttk::widget(n)\fR.
 .TP
-\fIpathName \fBidentify\fR \fIx y\fR
+\fIpathName \fBidentify \fIx y\fR
 Returns the name of the element at position \fIx\fR, \fIy\fR.
 See \fIttk::widget(n)\fR.
 .TP
diff --git a/doc/ttk_radiobutton.n b/doc/ttk_radiobutton.n
index cbea359..afbd8c2 100644
--- a/doc/ttk_radiobutton.n
+++ b/doc/ttk_radiobutton.n
@@ -29,7 +29,7 @@ it sets the variable to its associated value.
 .OP \-command command Command
 A Tcl script to evaluate whenever the widget is invoked.
 .OP \-value Value Value
-The value to store in the associated \fI\-variable\fR 
+The value to store in the associated \fB\-variable\fR 
 when the widget is selected. 
 .OP \-variable variable Variable
 The name of a global variable whose value is linked to the widget.
diff --git a/doc/ttk_scale.n b/doc/ttk_scale.n
index 2fd485b..c84461e 100644
--- a/doc/ttk_scale.n
+++ b/doc/ttk_scale.n
@@ -39,7 +39,7 @@ or vertically. Must be either \fBhorizontal\fR or \fBvertical\fR or an
 abbreviation of one of these.
 .OP \-to to To
 Specifies a real value corresponding to the right or bottom end of the scale.
-This value may be either less than or greater than the \fBfrom\fR option.
+This value may be either less than or greater than the \fB\-from\fR option.
 .OP \-value value Value
 Specifies the current floating-point value of the variable.
 .OP \-variable variable Variable
@@ -65,7 +65,7 @@ Get the current value of the \fB\-value\fR option, or the value corresponding
 to the coordinates \fIx,y\fR if they are specified. \fIX\fR and \fIy\fR are
 pixel coordinates relative to the scale widget origin.
 .TP
-\fIpathName \fBidentify\fR \fIx y\fR
+\fIpathName \fBidentify \fIx y\fR
 Returns the name of the element at position \fIx\fR, \fIy\fR.
 See \fIttk::widget(n)\fR.
 .TP
diff --git a/doc/ttk_scrollbar.n b/doc/ttk_scrollbar.n
index ce9eeed..b406339 100644
--- a/doc/ttk_scrollbar.n
+++ b/doc/ttk_scrollbar.n
@@ -48,7 +48,7 @@ Specifies the orientation of the scrollbar.
 .SH "WIDGET COMMAND"
 .PP
 .TP
-\fIpathName \fBcget\fR \fIoption\fR
+\fIpathName \fBcget \fIoption\fR
 Returns the current value of the specified \fIoption\fR; see \fIttk::widget(n)\fR.
 .TP
 \fIpathName \fBconfigure\fR ?\fIoption\fR? ?\fIvalue option value ...\fR?
@@ -58,14 +58,14 @@ Modify or query widget options; see \fIttk::widget(n)\fR.
 Returns the scrollbar settings in the form of a list whose
 elements are the arguments to the most recent \fBset\fR widget command.
 .TP
-\fIpathName \fBidentify\fR \fIx y\fR
+\fIpathName \fBidentify \fIx y\fR
 Returns the name of the element at position \fIx\fR, \fIy\fR.
 See \fIttk::widget(n)\fR.
 .TP
 \fIpathName \fBinstate \fIstatespec\fR ?\fIscript\fR?
 Test the widget state; see \fIttk::widget(n)\fR.
 .TP
-\fIpathName \fBset\fR \fIfirst last\fR
+\fIpathName \fBset \fIfirst last\fR
 This command is normally invoked by the scrollbar's associated widget 
 from an \fB\-xscrollcommand\fR or \fB\-yscrollcommand\fR callback.
 Specifies the visible range to be displayed.
diff --git a/doc/ttk_spinbox.n b/doc/ttk_spinbox.n
index a69784b..2933ae7 100644
--- a/doc/ttk_spinbox.n
+++ b/doc/ttk_spinbox.n
@@ -30,11 +30,11 @@ to a Tcl variable.
 .SH "WIDGET-SPECIFIC OPTIONS"
 .OP \-from from From
 A floating\-point value specifying the lowest value for the spinbox. This is
-used in conjunction with \fI\-to\fR and \fI\-increment\fR to set a numerical
+used in conjunction with \fB\-to\fR and \fB\-increment\fR to set a numerical
 range.
 .OP \-to to To
 A floating\-point value specifying the highest permissible value for the
-widget. See also \fI\-from\fR and \fI\-increment\fR.
+widget. See also \fB\-from\fR and \fB\-increment\fR.
 range.
 .OP \-increment increment Increment
 A floating\-point value specifying the change in value to be applied each
@@ -42,8 +42,8 @@ time one of the widget spin buttons is pressed. The up button applies a
 positive increment, the down button applies a negative increment.
 .OP \-values values Values
 This must be a Tcl list of values. If this option is set then this will
-override any range set using the \fI\-from\fR, \fI\-to\fR and 
-\fI\-increment\fR options. The widget will instead use the values
+override any range set using the \fB\-from\fR, \fB\-to\fR and 
+\fB\-increment\fR options. The widget will instead use the values
 specified beginning with the first value.
 .OP \-wrap wrap Wrap
 Must be a proper boolean value.  If on, the spinbox will wrap around the
@@ -61,7 +61,7 @@ See the \fBttk::entry\fR manual for information about indexing characters.
 .SH "VALIDATION"
 .PP
 See the \fBttk::entry\fR manual for information about using the 
-\fI\-validate\fR and \fI\-validatecommand\fR options.
+\fB\-validate\fR and \fB\-validatecommand\fR options.
 .SH "WIDGET COMMAND"
 .PP
 The following subcommands are possible for spinbox widgets in addition to
@@ -73,9 +73,9 @@ the commands described for the \fBttk::entry\fR widget:
 Returns the spinbox's current value.
 .TP
 \fIpathName \fBset \fIvalue\fR
-Set the spinbox string to \fIvalue\fR. If a \fI\-format\fR option has
+Set the spinbox string to \fIvalue\fR. If a \fB\-format\fR option has
 been configured then this format will be applied. If formatting fails
-or is not set or the \fI\-values\fR option has been used then the value
+or is not set or the \fB\-values\fR option has been used then the value
 is set directly.
 .SH "SEE ALSO"
 ttk::widget(n), ttk::entry(n), spinbox(n)
diff --git a/doc/ttk_treeview.n b/doc/ttk_treeview.n
index dd8ef8c..d414f5a 100644
--- a/doc/ttk_treeview.n
+++ b/doc/ttk_treeview.n
@@ -380,16 +380,16 @@ the specified tag.
 \fIpathName \fBtag names\fR
 Returns a list of all tags used by the widget.
 .TP
-\fIpathName \fBtag add\fR \fItag\fR \fIitems\fR
+\fIpathName \fBtag add \fItag items\fR
 Adds the specified \fItag\fR to each of the listed \fIitems\fR.
 If \fItag\fR is already present for a particular item,
-then the \fB-tags\fR for that item are unchanged.
+then the \fB\-tags\fR for that item are unchanged.
 .TP
-\fIpathName \fBtag remove\fR \fItag\fR ?\fIitems\fR?
+\fIpathName \fBtag remove \fItag\fR ?\fIitems\fR?
 Removes the specified \fItag\fR from each of the listed \fIitems\fR.
 If \fIitems\fR is omitted, removes \fItag\fR from each item in the tree.
 If \fItag\fR is not present for a particular item,
-then the \fB-tags\fR for that item are unchanged.
+then the \fB\-tags\fR for that item are unchanged.
 .RE
 .TP
 \fIpathName \fBxview \fIargs\fR
diff --git a/doc/ttk_vsapi.n b/doc/ttk_vsapi.n
index 7506ec4..e47c8b4 100644
--- a/doc/ttk_vsapi.n
+++ b/doc/ttk_vsapi.n
@@ -14,42 +14,46 @@ ttk_vsapi \- Define a Microsoft Visual Styles element
 .BE
 .SH DESCRIPTION
 .PP
-The \fIvsapi\fR element factory creates a new element
+The \fBvsapi\fR element factory creates a new element
 in the current theme whose visual appearance is drawn using the
 Microsoft Visual Styles API which is reponsible for the themed styles
 on Windows XP and Vista. This factory permits any of the Visual
-Styles parts to be declared as ttk elements that can then be
-included in a style layout to modify the appearance of ttk widgets.
+Styles parts to be declared as Ttk elements that can then be
+included in a style layout to modify the appearance of Ttk widgets.
 .PP
 \fIclassName\fR and \fIpartId\fR are required parameters and specify
 the Visual Styles class and part as given in the Microsoft
-documentation. The \fIstateMap\fR may be provided to map ttk states to
+documentation. The \fIstateMap\fR may be provided to map Ttk states to
 Visual Styles API states (see \fBSTATE MAP\fR).
 .SH "OPTIONS"
 .PP
 Valid \fIoptions\fR are:
 .TP
-\fB\-padding\fR \fIpadding\fR
+\fB\-padding \fIpadding\fR
+.
 Specify the element's interior padding.
 \fIpadding\fR is a list of up to four integers specifying
 the left, top, right and bottom padding quantities respectively.
 This option may not be mixed with any other options.
 .TP
-\fB\-margins\fR \fIpadding\fR
+\fB\-margins \fIpadding\fR
+.
 Specifies the elements exterior padding.
 \fIpadding\fR is a list of up to four integers specifying
 the left, top, right and bottom padding quantities respectively.
 This option may not be mixed with any other options.
 .TP
-\fB\-width\fR \fIwidth\fR
+\fB\-width \fIwidth\fR
+.
 Specifies the height for the element. If this option is set then
 the Visual Styles API will not be queried for the recommended
-size or the part. If this option is set then \fI-height\fR should
-also be set. The \fI-width\fR and \fI-height\fR options cannot
-be mixed with the \fI-padding\fR or \fI-margins\fR options.
+size or the part. If this option is set then \fB\-height\fR should
+also be set. The \fB\-width\fR and \fB\-height\fR options cannot
+be mixed with the \fB\-padding\fR or \fB\-margins\fR options.
 .TP
-\fB\-height\fR \fIheight\fR
-Specifies the height of the element. See the comments for \fI-width\fR.
+\fB\-height \fIheight\fR
+.
+Specifies the height of the element. See the comments for \fB\-width\fR.
 .SH "STATE MAP"
 .PP
 The \fIstateMap\fR parameter is a list of ttk states and the
@@ -61,7 +65,7 @@ last pair in the list should be the default state and is typically and
 empty list and 1. Unfortunately all the Visual Styles parts have
 different state values and these must be looked up either in the
 Microsoft documentation or more likely in the header files. The
-original header to use was \fItmschema.h\fR but in more recent
+original header to use was \fItmschema.h\fR, but in more recent
 versions of the Windows Development Kit this is \fIvssym32.h\fR.
 .PP
 If no \fIstateMap\fR parameter is given there is an implicit default
@@ -73,7 +77,7 @@ a \fBttk::button\fR(n). This uses the WINDOW part WP_SMALLCLOSEBUTTON
 and as documented the states CBS_DISABLED, CBS_HOT, CBS_NORMAL and
 CBS_PUSHED are mapped from ttk states.
 .CS
-ttk::style element create smallclose vsapi WINDOW 19 \\
+ttk::style element create smallclose \fBvsapi\fR WINDOW 19 \\
     {disabled 4 pressed 3 active 2 {} 1}
 ttk::style layout CloseButton {CloseButton.smallclose -sticky news}
 pack [ttk::button .close -style CloseButton]
@@ -82,7 +86,7 @@ pack [ttk::button .close -style CloseButton]
 Change the appearence of a \fBttk::checkbutton\fR(n) to use the
 Explorer pin part EBP_HEADERPIN.
 .CS
-ttk::style element create pin vsapi EXPLORERBAR 3 {
+ttk::style element create pin \fBvsapi\fR EXPLORERBAR 3 {
     {pressed !selected} 3
     {active !selected} 2
     {pressed selected} 6
diff --git a/doc/ttk_widget.n b/doc/ttk_widget.n
index 1d116eb..e7f7154 100644
--- a/doc/ttk_widget.n
+++ b/doc/ttk_widget.n
@@ -54,7 +54,7 @@ The first fraction indicates the first information in the widget
 that is visible in the window, and the second fraction indicates
 the information just after the last portion that is visible.
 .PP
-Typically the \fBxScrollCommand\fR option consists of the path name
+Typically the \fB\-xscrollcommand\fR option consists of the path name
 of a \fBscrollbar\fR widget followed by
 .QW set ,
 e.g.
@@ -123,11 +123,13 @@ but the \fBstate\fR widget command
 does not affect the \fB\-state\fR option.
 .SH COMMANDS
 .TP
-\fIpathName \fBcget\fR \fIoption\fR
+\fIpathName \fBcget \fIoption\fR
+.
 Returns the current value of the configuration option given
 by \fIoption\fR.
 .TP
 \fIpathName \fBconfigure\fR ?\fIoption\fR? ?\fIvalue option value ...\fR?
+.
 Query or modify the configuration options of the widget.
 If one or more \fIoption\-value\fR pairs are specified,
 then the command modifies the given widget option(s)
@@ -142,14 +144,16 @@ and current value.
 If no \fIoption\fR is specified, returns a list describing all of
 the available options for \fIpathName\fR.
 .TP
-\fIpathName \fBidentify\fR \fBelement\fR \fIx y\fR
+\fIpathName \fBidentify element \fIx y\fR
+.
 Returns the name of the element under the point given
 by \fIx\fR and \fIy\fR, or an empty string if the point does
 not lie within any element.
 \fIx\fR and \fIy\fR are pixel coordinates relative to the widget.
 Some widgets accept other \fBidentify\fR subcommands.
 .TP
-\fIpathName \fBinstate\fR \fIstatespec\fR ?\fIscript\fR?
+\fIpathName \fBinstate \fIstatespec\fR ?\fIscript\fR?
+.
 Test the widget's state.
 If \fIscript\fR is not specified, returns 1 if
 the widget state matches \fIstatespec\fR and 0 otherwise.
@@ -159,6 +163,7 @@ if {[\fIpathName\fR instate \fIstateSpec\fR]} \fIscript\fR
 .CE
 .TP
 \fIpathName \fBstate\fR ?\fIstateSpec\fR?
+.
 Modify or inquire widget state.
 If \fIstateSpec\fR is present, sets the widget state:
 for each flag in \fIstateSpec\fR, sets the corresponding flag
@@ -178,6 +183,7 @@ The widget state is a bitmap of independent state flags.
 Widget state flags include:
 .TP
 \fBactive\fR
+.
 The mouse cursor is over the widget
 and pressing a mouse button will cause some action to occur. (aka
 .QW prelight
@@ -187,19 +193,23 @@ and pressing a mouse button will cause some action to occur. (aka
 .QW hover ).
 .TP
 \fBdisabled\fR
+.
 Widget is disabled under program control (aka
 .QW unavailable ,
-.QW inactive )
+.QW inactive ).
 .TP
 \fBfocus\fR
-Widget has keyboard focus
+.
+Widget has keyboard focus.
 .TP
 \fBpressed\fR
+.
 Widget is being pressed (aka
 .QW armed
 in Motif).
 .TP
 \fBselected\fR
+.
 .QW On ,
 .QW true ,
 or
@@ -207,6 +217,7 @@ or
 for things like checkbuttons and radiobuttons.
 .TP
 \fBbackground\fR
+.
 Windows and the Mac have a notion of an
 .QW active
 or foreground window.
@@ -214,9 +225,11 @@ The \fBbackground\fR state is set for widgets in a background window,
 and cleared for those in the foreground window.
 .TP
 \fBreadonly\fR
+.
 Widget should not allow user modification.
 .TP
 \fBalternate\fR
+.
 A widget-specific alternate display format.
 For example, used for checkbuttons and radiobuttons in the
 .QW tristate
@@ -225,11 +238,13 @@ or
 state, and for buttons with \fB\-default active\fR.
 .TP
 \fBinvalid\fR
+.
 The widget's value is invalid.
 (Potential uses: scale widget value out of bounds,
 entry widget value failed validation.)
 .TP
 \fBhover\fR
+.
 The mouse cursor is within the widget.
 This is similar to the \fBactive\fP state;
 it is used in some themes for widgets that
@@ -245,13 +260,13 @@ indicating that the bit is off.
 set b [ttk::button .b]
 
 # Disable the widget:
-$b state disabled
+$b \fBstate\fR disabled
 
 # Invoke the widget only if it is currently pressed and enabled:
-$b instate {pressed !disabled} { .b invoke }
+$b \fBinstate\fR {pressed !disabled} { .b invoke }
 
 # Reenable widget:
-$b state !disabled
+$b \fBstate\fR !disabled
 .CE
 .SH "SEE ALSO"
 ttk::intro(n), ttk::style(n)