diff options
Diffstat (limited to 'doc')
12 files changed, 389 insertions, 24 deletions
diff --git a/doc/src/declarative/anchor-layout.qdoc b/doc/src/declarative/anchor-layout.qdoc index b77ce36..f5d5697 100644 --- a/doc/src/declarative/anchor-layout.qdoc +++ b/doc/src/declarative/anchor-layout.qdoc @@ -30,6 +30,8 @@ \target anchor-layout \title Anchor-based Layout in QML +\section1 Overview + In addition to the more traditional \l Grid, \l Row, and \l Column, QML also provides a way to layout items using the concept of \e anchors. Each item can be thought of as having a set of 7 invisible "anchor lines": @@ -54,20 +56,6 @@ In this case, the left edge of \e rect2 is bound to the right edge of \e rect1, \image edge1.png -The anchoring system also allows you to specify margins and offsets. Margins specify the amount of empty space to leave to the outside of an item, while offsets allow you to manipulate positioning using the center anchor lines. Note that margins specified using the anchor layout system only have meaning for anchors; they won't have any effect when using other layouts or absolute positioning. - -\image margins_qml.png - -The following example specifies a left margin: - -\code -Rectangle { id: rect1; ... } -Rectangle { id: rect2; anchors.left: rect1.right; anchors.leftMargin: 5; ... } -\endcode - -In this case, a margin of 5 pixels is reserved to the left of \e rect2, producing the following: - -\image edge2.png You can specify multiple anchors. For example: @@ -78,7 +66,9 @@ Rectangle { id: rect2; anchors.left: rect1.right; anchors.top: rect1.bottom; ... \image edge3.png -By specifying multiple horizontal or vertical anchors you can control the size of an item. For example: +By specifying multiple horizontal or vertical anchors you can control the size of an item. Below, +\e rect2 is anchored to the right of \e rect1 and the left of \e rect3. If either of the blue +rectangles are moved, \e rect2 will stretch and shrink as necessary: \code Rectangle { id: rect1; x: 0; ... } @@ -88,9 +78,42 @@ Rectangle { id: rect3; x: 150; ... } \image edge4.png -\section1 Limitations -For performance reasons, you can only anchor an item to its siblings and direct parent. For example, the following anchor would be considered invalid and would produce a warning: +\section1 Anchor Margins and Offsets + +The anchoring system also allows \e margins and \e offsets to be specified for an item's anchors. +Margins specify the amount of empty space to leave to the outside of an item's anchor, while +offsets allow positioning to be manipulated using the center anchor lines. An item can +specify its anchor margins individually through \l {Item::anchors.leftMargin}{leftMargin}, +\l {Item::anchors.rightMargin}{rightMargin}, \l {Item::anchors.topMargin}{topMargin} and +\l {Item::anchors.bottomMargin}{bottomMargin}, or use \l {Item::}{anchors.margins} to +specify the same margin value for all four edges. Anchor offsets are specified using +\l {Item::anchors.horizontalCenterOffset}{horizontalCenterOffset}, +\l {Item::anchors.verticalCenterOffset}{verticalCenterOffset} and +\l {Item::anchors.baselineOffset}{baselineOffset}. + +\image margins_qml.png + +The following example specifies a left margin: + +\code +Rectangle { id: rect1; ... } +Rectangle { id: rect2; anchors.left: rect1.right; anchors.leftMargin: 5; ... } +\endcode + +In this case, a margin of 5 pixels is reserved to the left of \e rect2, producing the following: + +\image edge2.png + +\note Anchor margins only apply to anchors; they are \e not a generic means of applying margins to an \l Item. +If an anchor margin is specified for an edge but the item is not anchored to any item on that +edge, the margin is not applied. + + +\section1 Restrictions + +For performance reasons, you can only anchor an item to its siblings and direct parent. For example, +the following anchor is invalid and would produce a warning: \badcode Item { @@ -103,4 +126,13 @@ Item { } \endcode +Also, anchor-based layouts cannot be mixed with absolute positioning. If an item specifies its +\l {Item::}{x} position and also sets \l {Item::}{anchors.left}, +or anchors its left and right edges but additionally sets a \l {Item::}{width}, the +result is undefined, as it would not be clear whether the item should use anchoring or absolute +positioning. The same can be said for setting an item's \l {Item::}{y} and \l {Item::}{height} +with \l {Item::}{anchors.top} and \l {Item::}{anchors.bottom}, or setting \l {Item::}{anchors.fill} +as well as \l {Item::}{width} or \l {Item::}{height}. If you wish to change from using +anchor-based to absolute positioning, you can clear an anchor value by setting it to \c undefined. + */ diff --git a/doc/src/declarative/declarativeui.qdoc b/doc/src/declarative/declarativeui.qdoc index 3d963e2..41b9952 100644 --- a/doc/src/declarative/declarativeui.qdoc +++ b/doc/src/declarative/declarativeui.qdoc @@ -108,6 +108,7 @@ Module. \section1 Handling Data \list +\o \l{QML Basic Types}{QML Basic Data Types} \o \l{Using QML Positioner and Repeater Items} \o \l{QML Data Models} \o \l{Presenting Data with QML} diff --git a/doc/src/declarative/extending.qdoc b/doc/src/declarative/extending.qdoc index fc5c586..e23ca91 100644 --- a/doc/src/declarative/extending.qdoc +++ b/doc/src/declarative/extending.qdoc @@ -596,10 +596,10 @@ the appropriate property on the extension object is used instead. When an extended type is installed, one of the \code template<typename T, typename ExtendedT> -int qmlRegisterType(const char *uri, int versionMajor, int versionMinor, const char *qmlName) +int qmlRegisterExtendedType(const char *uri, int versionMajor, int versionMinor, const char *qmlName) template<typename T, typename ExtendedT> -int qmlRegisterType() +int qmlRegisterExtendedType() \endcode functions should be used instead of the regular \c qmlRegisterType() variations. The arguments are identical to the corresponding non-extension registration functions, diff --git a/doc/src/declarative/javascriptblocks.qdoc b/doc/src/declarative/javascriptblocks.qdoc index 16d0633..155bd6e 100644 --- a/doc/src/declarative/javascriptblocks.qdoc +++ b/doc/src/declarative/javascriptblocks.qdoc @@ -94,9 +94,8 @@ Both relative and absolute JavaScript URLs can be imported. In the case of a relative URL, the location is resolved relative to the location of the \l {QML Document} that contains the import. If the script file is not accessible, an error will occur. If the JavaScript needs to be fetched from a network -resource, the QML document has a "Loading" -\l {QDeclarativeComponent::status()}{status} until the script has been -downloaded. +resource, the component's \l {QDeclarativeComponent::status()}{status} is set to +"Loading" until the script has been downloaded. Imported JavaScript files are always qualified using the "as" keyword. The qualifier for JavaScript files must be unique, so there is always a one-to-one @@ -143,6 +142,31 @@ As they are shared, stateless library files cannot access QML component instance objects or properties directly, although QML values can be passed as function parameters. + +\section2 Importing One JavaScript File From Another + +If a JavaScript file needs to use functions defined inside another JavaScript file, +the other file can be imported using the \l {QML:Qt::include()}{Qt.include()} +function. This imports all functions from the other file into the current file's +namespace. + +For example, the QML code below left calls \c showCalculations() in \c script.js, +which in turn can call \c factorial() in \c factorial.js, as it has included +\c factorial.js using \l {QML:Qt::include()}{Qt.include()}. + +\table +\row +\o {1,2} \snippet doc/src/snippets/declarative/integrating-javascript/includejs/app.qml 0 +\o \snippet doc/src/snippets/declarative/integrating-javascript/includejs/script.js 0 +\row +\o \snippet doc/src/snippets/declarative/integrating-javascript/includejs/factorial.js 0 +\endtable + +Notice that calling \l {QML:Qt::include()}{Qt.include()} imports all functions from +\c factorial.js into the \c MyScript namespace, which means the QML component can also +access \c factorial() directly as \c MyScript.factorial(). + + \section1 Running JavaScript at Startup It is occasionally necessary to run some imperative code at application (or diff --git a/doc/src/declarative/qtbinding.qdoc b/doc/src/declarative/qtbinding.qdoc index 71f41bc..04b8ca6 100644 --- a/doc/src/declarative/qtbinding.qdoc +++ b/doc/src/declarative/qtbinding.qdoc @@ -426,6 +426,7 @@ By default, QML recognizes the following data types: \o QSize, QSizeF \o QRect, QRectF \o QVariant +\o QVariantList, QVariantMap \o QObject* \o Enumerations declared with Q_ENUMS() \endlist @@ -434,6 +435,37 @@ To allow a custom C++ type to be created or used in QML, the C++ class must be r type using qmlRegisterType(), as shown in the \l {Defining new QML elements} section above. +\section2 JavaScript arrays and objects + +There is built-in support for automatic type conversion between QVariantList and JavaScript +arrays, and QVariantMap and JavaScript objects. + +For example, the function defined in QML below left expects two arguments, an array and an object, and prints +their contents using the standard JavaScript syntax for array and object item access. The C++ code +below right calls this function, passing a QVariantList and a QVariantMap, which are automatically +converted to JavaScript array and object values, repectively: + +\table +\row +\o \snippet doc/src/snippets/declarative/qtbinding/variantlistmap/MyItem.qml 0 +\o \snippet doc/src/snippets/declarative/qtbinding/variantlistmap/main.cpp 0 +\endtable + +This produces output like: + +\code +Array item: 10 +Array item: #00ff00 +Array item: bottles +Object item: language = QML +Object item: released = Tue Sep 21 2010 00:00:00 GMT+1000 (EST) +\endcode + +Similarly, if a C++ type uses a QVariantList or QVariantMap type for a property or method +parameter, the value can be created as a JavaScript array or object in the QML +side, and is automatically converted to a QVariantList or QVariantMap when it is passed to C++. + + \section2 Using enumerations of a custom type To use an enumeration from a custom C++ component, the enumeration must be declared with Q_ENUMS() to @@ -455,7 +487,7 @@ See the \l {Tutorial: Writing QML extensions with C++}{Writing QML extensions wi the \l {Extending QML in C++} reference documentation for more information. -\section2 Automatic type conversion +\section2 Automatic type conversion from strings As a convenience, some basic types can be specified in QML using format strings to make it easier to pass simple values from QML to C++. diff --git a/doc/src/examples/diagramscene.qdoc b/doc/src/examples/diagramscene.qdoc index 98bc983..d5cc4e3 100644 --- a/doc/src/examples/diagramscene.qdoc +++ b/doc/src/examples/diagramscene.qdoc @@ -195,7 +195,7 @@ This function returns a QWidget containing a QToolButton with an image of one of the \c DiagramItems, i.e., flowchart shapes. The image is created by the \c DiagramItem through the \c image() - function. The QButtonGroup class lets us attach a QVariant with + function. The QButtonGroup class lets us attach an id (int) with each button; we store the diagram's type, i.e., the DiagramItem::DiagramType enum. We use the stored diagram type when we create new diagram items for the scene. The widgets created diff --git a/doc/src/snippets/declarative/integrating-javascript/includejs/app.qml b/doc/src/snippets/declarative/integrating-javascript/includejs/app.qml new file mode 100644 index 0000000..2ecc475 --- /dev/null +++ b/doc/src/snippets/declarative/integrating-javascript/includejs/app.qml @@ -0,0 +1,56 @@ +/**************************************************************************** +** +** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies). +** All rights reserved. +** Contact: Nokia Corporation (qt-info@nokia.com) +** +** This file is part of the documentation of the Qt Toolkit. +** +** $QT_BEGIN_LICENSE:BSD$ +** You may use this file under the terms of the BSD license as follows: +** +** "Redistribution and use in source and binary forms, with or without +** modification, are permitted provided that the following conditions are +** met: +** * Redistributions of source code must retain the above copyright +** notice, this list of conditions and the following disclaimer. +** * Redistributions in binary form must reproduce the above copyright +** notice, this list of conditions and the following disclaimer in +** the documentation and/or other materials provided with the +** distribution. +** * Neither the name of Nokia Corporation and its Subsidiary(-ies) nor +** the names of its contributors may be used to endorse or promote +** products derived from this software without specific prior written +** permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE." +** $QT_END_LICENSE$ +** +****************************************************************************/ +//![0] +import QtQuick 1.0 +import "script.js" as MyScript + +Item { + width: 100; height: 100 + + MouseArea { + anchors.fill: parent + onClicked: { + MyScript.showCalculations(10) + console.log("Call factorial() from QML:", + MyScript.factorial(10)) + } + } +} +//![0] diff --git a/doc/src/snippets/declarative/integrating-javascript/includejs/factorial.js b/doc/src/snippets/declarative/integrating-javascript/includejs/factorial.js new file mode 100644 index 0000000..0a01e9e --- /dev/null +++ b/doc/src/snippets/declarative/integrating-javascript/includejs/factorial.js @@ -0,0 +1,49 @@ +/**************************************************************************** +** +** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies). +** All rights reserved. +** Contact: Nokia Corporation (qt-info@nokia.com) +** +** This file is part of the documentation of the Qt Toolkit. +** +** $QT_BEGIN_LICENSE:BSD$ +** You may use this file under the terms of the BSD license as follows: +** +** "Redistribution and use in source and binary forms, with or without +** modification, are permitted provided that the following conditions are +** met: +** * Redistributions of source code must retain the above copyright +** notice, this list of conditions and the following disclaimer. +** * Redistributions in binary form must reproduce the above copyright +** notice, this list of conditions and the following disclaimer in +** the documentation and/or other materials provided with the +** distribution. +** * Neither the name of Nokia Corporation and its Subsidiary(-ies) nor +** the names of its contributors may be used to endorse or promote +** products derived from this software without specific prior written +** permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE." +** $QT_END_LICENSE$ +** +****************************************************************************/ +//![0] +// factorial.js +function factorial(a) { + a = parseInt(a); + if (a <= 0) + return 1; + else + return a * factorial(a - 1); +} +//![0] diff --git a/doc/src/snippets/declarative/integrating-javascript/includejs/script.js b/doc/src/snippets/declarative/integrating-javascript/includejs/script.js new file mode 100644 index 0000000..7380412 --- /dev/null +++ b/doc/src/snippets/declarative/integrating-javascript/includejs/script.js @@ -0,0 +1,48 @@ +/**************************************************************************** +** +** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies). +** All rights reserved. +** Contact: Nokia Corporation (qt-info@nokia.com) +** +** This file is part of the documentation of the Qt Toolkit. +** +** $QT_BEGIN_LICENSE:BSD$ +** You may use this file under the terms of the BSD license as follows: +** +** "Redistribution and use in source and binary forms, with or without +** modification, are permitted provided that the following conditions are +** met: +** * Redistributions of source code must retain the above copyright +** notice, this list of conditions and the following disclaimer. +** * Redistributions in binary form must reproduce the above copyright +** notice, this list of conditions and the following disclaimer in +** the documentation and/or other materials provided with the +** distribution. +** * Neither the name of Nokia Corporation and its Subsidiary(-ies) nor +** the names of its contributors may be used to endorse or promote +** products derived from this software without specific prior written +** permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE." +** $QT_END_LICENSE$ +** +****************************************************************************/ +//![0] +// script.js +Qt.include("factorial.js") + +function showCalculations(value) { + console.log("Call factorial() from script.js:", + factorial(value)); +} +//![0] diff --git a/doc/src/snippets/declarative/qtbinding/variantlistmap/MyItem.qml b/doc/src/snippets/declarative/qtbinding/variantlistmap/MyItem.qml new file mode 100644 index 0000000..dd59fed --- /dev/null +++ b/doc/src/snippets/declarative/qtbinding/variantlistmap/MyItem.qml @@ -0,0 +1,54 @@ +/**************************************************************************** +** +** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies). +** All rights reserved. +** Contact: Nokia Corporation (qt-info@nokia.com) +** +** This file is part of the documentation of the Qt Toolkit. +** +** $QT_BEGIN_LICENSE:BSD$ +** You may use this file under the terms of the BSD license as follows: +** +** "Redistribution and use in source and binary forms, with or without +** modification, are permitted provided that the following conditions are +** met: +** * Redistributions of source code must retain the above copyright +** notice, this list of conditions and the following disclaimer. +** * Redistributions in binary form must reproduce the above copyright +** notice, this list of conditions and the following disclaimer in +** the documentation and/or other materials provided with the +** distribution. +** * Neither the name of Nokia Corporation and its Subsidiary(-ies) nor +** the names of its contributors may be used to endorse or promote +** products derived from this software without specific prior written +** permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE." +** $QT_END_LICENSE$ +** +****************************************************************************/ +import QtQuick 1.0 + +//![0] +// MyItem.qml +Item { + function readValues(anArray, anObject) { + for (var i=0; i<anArray.length; i++) + console.log("Array item:", anArray[i]) + + for (var prop in anObject) { + console.log("Object item:", prop, "=", anObject[prop]) + } + } +} +//![0] diff --git a/doc/src/snippets/declarative/qtbinding/variantlistmap/main.cpp b/doc/src/snippets/declarative/qtbinding/variantlistmap/main.cpp new file mode 100644 index 0000000..9986264 --- /dev/null +++ b/doc/src/snippets/declarative/qtbinding/variantlistmap/main.cpp @@ -0,0 +1,67 @@ +/**************************************************************************** +** +** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies). +** All rights reserved. +** Contact: Nokia Corporation (qt-info@nokia.com) +** +** This file is part of the documentation of the Qt Toolkit. +** +** $QT_BEGIN_LICENSE:BSD$ +** You may use this file under the terms of the BSD license as follows: +** +** "Redistribution and use in source and binary forms, with or without +** modification, are permitted provided that the following conditions are +** met: +** * Redistributions of source code must retain the above copyright +** notice, this list of conditions and the following disclaimer. +** * Redistributions in binary form must reproduce the above copyright +** notice, this list of conditions and the following disclaimer in +** the documentation and/or other materials provided with the +** distribution. +** * Neither the name of Nokia Corporation and its Subsidiary(-ies) nor +** the names of its contributors may be used to endorse or promote +** products derived from this software without specific prior written +** permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE." +** $QT_END_LICENSE$ +** +****************************************************************************/ +#include <QtCore> +#include <QtDeclarative> + +int main(int argc, char *argv[]) { + QApplication app(argc, argv); + +//![0] +// C++ +QDeclarativeView view(QUrl::fromLocalFile("MyItem.qml")); + +QVariantList list; +list << 10 << Qt::green << "bottles"; + +QVariantMap map; +map.insert("language", "QML"); +map.insert("released", QDate(2010, 9, 21)); + +QMetaObject::invokeMethod(view.rootObject(), "readValues", + Q_ARG(QVariant, QVariant::fromValue(list)), + Q_ARG(QVariant, QVariant::fromValue(map))); +//![0] + + view.setSource(QUrl::fromLocalFile("MyItem.qml")); + view.show(); + + return app.exec(); +} + diff --git a/doc/src/snippets/declarative/qtbinding/variantlistmap/variantlistmap.pro b/doc/src/snippets/declarative/qtbinding/variantlistmap/variantlistmap.pro new file mode 100644 index 0000000..68eeaf2 --- /dev/null +++ b/doc/src/snippets/declarative/qtbinding/variantlistmap/variantlistmap.pro @@ -0,0 +1,2 @@ +QT += declarative +SOURCES += main.cpp |